extcon: axp288: Remove unnecessary irq?_en register writes

Setting the irq_enable bits is taken care of by the irq chip when we
request the irqs and the driver should not be meddling with the
irq?_en registers itself.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This commit is contained in:
Hans de Goede 2016-12-19 01:13:12 +01:00 committed by Chanwoo Choi
parent 5757aca101
commit be1749528e

View file

@ -70,12 +70,6 @@
#define DET_STAT_CDP 2
#define DET_STAT_DCP 3
/* IRQ enable-1 register */
#define PWRSRC_IRQ_CFG_MASK (BIT(4)|BIT(3)|BIT(2))
/* IRQ enable-6 register */
#define BC12_IRQ_CFG_MASK BIT(1)
enum axp288_extcon_reg {
AXP288_PS_STAT_REG = 0x00,
AXP288_PS_BOOT_REASON_REG = 0x02,
@ -83,8 +77,6 @@ enum axp288_extcon_reg {
AXP288_BC_VBUS_CNTL_REG = 0x2d,
AXP288_BC_USB_STAT_REG = 0x2e,
AXP288_BC_DET_STAT_REG = 0x2f,
AXP288_PWRSRC_IRQ_CFG_REG = 0x40,
AXP288_BC12_IRQ_CFG_REG = 0x45,
};
enum axp288_mux_select {
@ -240,15 +232,10 @@ static irqreturn_t axp288_extcon_isr(int irq, void *data)
return IRQ_HANDLED;
}
static void axp288_extcon_enable_irq(struct axp288_extcon_info *info)
static void axp288_extcon_enable(struct axp288_extcon_info *info)
{
/* Unmask VBUS interrupt */
regmap_write(info->regmap, AXP288_PWRSRC_IRQ_CFG_REG,
PWRSRC_IRQ_CFG_MASK);
regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG,
BC_GLOBAL_RUN, 0);
/* Unmask the BC1.2 complete interrupts */
regmap_write(info->regmap, AXP288_BC12_IRQ_CFG_REG, BC12_IRQ_CFG_MASK);
/* Enable the charger detection logic */
regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG,
BC_GLOBAL_RUN, BC_GLOBAL_RUN);
@ -325,8 +312,8 @@ static int axp288_extcon_probe(struct platform_device *pdev)
}
}
/* Enable interrupts */
axp288_extcon_enable_irq(info);
/* Start charger cable type detection */
axp288_extcon_enable(info);
return 0;
}