atl1c: using fixed TXQ configuration for l2cb and l1c

using fixed TXQ config for l2cb and l1c regardless dmar_block
to make tx-DMA more stable.
register REG_TXQ_CTRL is refined as well.

Signed-off-by: xiong <xiong@qca.qualcomm.com>
Tested-by: Liu David <dwliu@qca.qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Huang, Xiong 2012-04-17 19:32:35 +00:00 committed by David S. Miller
parent 3f6f6a6181
commit c24588afc5
2 changed files with 28 additions and 19 deletions

View file

@ -467,15 +467,31 @@ int atl1c_phy_power_saving(struct atl1c_hw *hw);
#define TPD_RING_SIZE_MASK 0xFFFF
/* TXQ Control Register */
#define REG_TXQ_CTRL 0x1590
#define TXQ_NUM_TPD_BURST_MASK 0xF
#define TXQ_NUM_TPD_BURST_SHIFT 0
#define TXQ_CTRL_IP_OPTION_EN 0x10
#define TXQ_CTRL_EN 0x20
#define TXQ_CTRL_ENH_MODE 0x40
#define TXQ_CTRL_LS_8023_EN 0x80
#define TXQ_TXF_BURST_NUM_SHIFT 16
#define TXQ_TXF_BURST_NUM_MASK 0xFFFF
#define REG_TXQ_CTRL 0x1590
#define TXQ_TXF_BURST_NUM_MASK 0xFFFFUL
#define TXQ_TXF_BURST_NUM_SHIFT 16
#define L1C_TXQ_TXF_BURST_PREF 0x200
#define L2CB_TXQ_TXF_BURST_PREF 0x40
#define TXQ_CTRL_PEDING_CLR BIT(8)
#define TXQ_CTRL_LS_8023_EN BIT(7)
#define TXQ_CTRL_ENH_MODE BIT(6)
#define TXQ_CTRL_EN BIT(5)
#define TXQ_CTRL_IP_OPTION_EN BIT(4)
#define TXQ_NUM_TPD_BURST_MASK 0xFUL
#define TXQ_NUM_TPD_BURST_SHIFT 0
#define TXQ_NUM_TPD_BURST_DEF 5
#define TXQ_CFGV (\
FIELDX(TXQ_NUM_TPD_BURST, TXQ_NUM_TPD_BURST_DEF) |\
TXQ_CTRL_ENH_MODE |\
TXQ_CTRL_LS_8023_EN |\
TXQ_CTRL_IP_OPTION_EN)
#define L1C_TXQ_CFGV (\
TXQ_CFGV |\
FIELDX(TXQ_TXF_BURST_NUM, L1C_TXQ_TXF_BURST_PREF))
#define L2CB_TXQ_CFGV (\
TXQ_CFGV |\
FIELDX(TXQ_TXF_BURST_NUM, L2CB_TXQ_TXF_BURST_PREF))
/* Jumbo packet Threshold for task offload */
#define REG_TX_TSO_OFFLOAD_THRESH 0x1594 /* In 8-bytes */

View file

@ -1049,7 +1049,6 @@ static void atl1c_configure_tx(struct atl1c_adapter *adapter)
u32 max_pay_load;
u16 tx_offload_thresh;
u32 txq_ctrl_data;
u32 max_pay_load_data;
tx_offload_thresh = MAX_TX_OFFLOAD_THRESH;
AT_WRITE_REG(hw, REG_TX_TSO_OFFLOAD_THRESH,
@ -1059,15 +1058,9 @@ static void atl1c_configure_tx(struct atl1c_adapter *adapter)
DEVICE_CTRL_MAX_RREQ_SZ_MASK;
hw->dmar_block = min_t(u32, max_pay_load, hw->dmar_block);
txq_ctrl_data = (hw->tpd_burst & TXQ_NUM_TPD_BURST_MASK) <<
TXQ_NUM_TPD_BURST_SHIFT;
if (hw->ctrl_flags & ATL1C_TXQ_MODE_ENHANCE)
txq_ctrl_data |= TXQ_CTRL_ENH_MODE;
max_pay_load_data = (atl1c_pay_load_size[hw->dmar_block] &
TXQ_TXF_BURST_NUM_MASK) << TXQ_TXF_BURST_NUM_SHIFT;
if (hw->nic_type == athr_l2c_b || hw->nic_type == athr_l2c_b2)
max_pay_load_data >>= 1;
txq_ctrl_data |= max_pay_load_data;
txq_ctrl_data =
hw->nic_type == athr_l2c_b || hw->nic_type == athr_l2c_b2 ?
L2CB_TXQ_CFGV : L1C_TXQ_CFGV;
AT_WRITE_REG(hw, REG_TXQ_CTRL, txq_ctrl_data);
}