zram: remove obsolete sysfs attrs

We had a deprecated_attr_warn() warning for 2 years and now the time has
come and we finally can do the cleanup.

The plan was as follows:

: per-stat sysfs attributes are considered to be deprecated.
: The basic strategy is:
: -- the existing RW nodes will be downgraded to WO nodes (in linux 4.11)
: -- deprecated RO sysfs nodes will eventually be removed (in linux 4.11)
:
: The list of deprecated attributes can be found here:
: Documentation/ABI/obsolete/sysfs-block-zram
:
: Basically, every attribute that has its own read accessible sysfs
: node (e.g. num_reads) *AND* is accessible via one of the stat files
: (zram<id>/stat or zram<id>/io_stat or zram<id>/mm_stat) is considered
: to be deprecated.

The patch also removes `obsolete/sysfs-block-zram', clean ups
`testing/sysfs-block-zram' and tweaks zram.txt files.

Link: http://lkml.kernel.org/r/20170118035838.11090-1-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Sergey Senozhatsky 2017-02-22 15:46:45 -08:00 committed by Linus Torvalds
parent 5d63f81c9e
commit c87d1655c2
4 changed files with 42 additions and 353 deletions

View file

@ -1,119 +0,0 @@
What: /sys/block/zram<id>/num_reads
Date: August 2015
Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Description:
The num_reads file is read-only and specifies the number of
reads (failed or successful) done on this device.
Now accessible via zram<id>/stat node.
What: /sys/block/zram<id>/num_writes
Date: August 2015
Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Description:
The num_writes file is read-only and specifies the number of
writes (failed or successful) done on this device.
Now accessible via zram<id>/stat node.
What: /sys/block/zram<id>/invalid_io
Date: August 2015
Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Description:
The invalid_io file is read-only and specifies the number of
non-page-size-aligned I/O requests issued to this device.
Now accessible via zram<id>/io_stat node.
What: /sys/block/zram<id>/failed_reads
Date: August 2015
Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Description:
The failed_reads file is read-only and specifies the number of
failed reads happened on this device.
Now accessible via zram<id>/io_stat node.
What: /sys/block/zram<id>/failed_writes
Date: August 2015
Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Description:
The failed_writes file is read-only and specifies the number of
failed writes happened on this device.
Now accessible via zram<id>/io_stat node.
What: /sys/block/zram<id>/notify_free
Date: August 2015
Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Description:
The notify_free file is read-only. Depending on device usage
scenario it may account a) the number of pages freed because
of swap slot free notifications or b) the number of pages freed
because of REQ_DISCARD requests sent by bio. The former ones
are sent to a swap block device when a swap slot is freed, which
implies that this disk is being used as a swap disk. The latter
ones are sent by filesystem mounted with discard option,
whenever some data blocks are getting discarded.
Now accessible via zram<id>/io_stat node.
What: /sys/block/zram<id>/zero_pages
Date: August 2015
Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Description:
The zero_pages file is read-only and specifies number of zero
filled pages written to this disk. No memory is allocated for
such pages.
Now accessible via zram<id>/mm_stat node.
What: /sys/block/zram<id>/orig_data_size
Date: August 2015
Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Description:
The orig_data_size file is read-only and specifies uncompressed
size of data stored in this disk. This excludes zero-filled
pages (zero_pages) since no memory is allocated for them.
Unit: bytes
Now accessible via zram<id>/mm_stat node.
What: /sys/block/zram<id>/compr_data_size
Date: August 2015
Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Description:
The compr_data_size file is read-only and specifies compressed
size of data stored in this disk. So, compression ratio can be
calculated using orig_data_size and this statistic.
Unit: bytes
Now accessible via zram<id>/mm_stat node.
What: /sys/block/zram<id>/mem_used_total
Date: August 2015
Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Description:
The mem_used_total file is read-only and specifies the amount
of memory, including allocator fragmentation and metadata
overhead, allocated for this disk. So, allocator space
efficiency can be calculated using compr_data_size and this
statistic.
Unit: bytes
Now accessible via zram<id>/mm_stat node.
What: /sys/block/zram<id>/mem_used_max
Date: August 2015
Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Description:
The mem_used_max file is read/write and specifies the amount
of maximum memory zram have consumed to store compressed data.
For resetting the value, you should write "0". Otherwise,
you could see -EINVAL.
Unit: bytes
Downgraded to write-only node: so it's possible to set new
value only; its current value is stored in zram<id>/mm_stat
node.
What: /sys/block/zram<id>/mem_limit
Date: August 2015
Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Description:
The mem_limit file is read/write and specifies the maximum
amount of memory ZRAM can use to store the compressed data.
The limit could be changed in run time and "0" means disable
the limit. No limit is the initial state. Unit: bytes
Downgraded to write-only node: so it's possible to set new
value only; its current value is stored in zram<id>/mm_stat
node.

View file

@ -22,41 +22,6 @@ Description:
device. The reset operation frees all the memory associated
with this device.
What: /sys/block/zram<id>/num_reads
Date: August 2010
Contact: Nitin Gupta <ngupta@vflare.org>
Description:
The num_reads file is read-only and specifies the number of
reads (failed or successful) done on this device.
What: /sys/block/zram<id>/num_writes
Date: August 2010
Contact: Nitin Gupta <ngupta@vflare.org>
Description:
The num_writes file is read-only and specifies the number of
writes (failed or successful) done on this device.
What: /sys/block/zram<id>/invalid_io
Date: August 2010
Contact: Nitin Gupta <ngupta@vflare.org>
Description:
The invalid_io file is read-only and specifies the number of
non-page-size-aligned I/O requests issued to this device.
What: /sys/block/zram<id>/failed_reads
Date: February 2014
Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Description:
The failed_reads file is read-only and specifies the number of
failed reads happened on this device.
What: /sys/block/zram<id>/failed_writes
Date: February 2014
Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Description:
The failed_writes file is read-only and specifies the number of
failed writes happened on this device.
What: /sys/block/zram<id>/max_comp_streams
Date: February 2014
Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
@ -73,74 +38,24 @@ Description:
available and selected compression algorithms, change
compression algorithm selection.
What: /sys/block/zram<id>/notify_free
Date: August 2010
Contact: Nitin Gupta <ngupta@vflare.org>
Description:
The notify_free file is read-only. Depending on device usage
scenario it may account a) the number of pages freed because
of swap slot free notifications or b) the number of pages freed
because of REQ_DISCARD requests sent by bio. The former ones
are sent to a swap block device when a swap slot is freed, which
implies that this disk is being used as a swap disk. The latter
ones are sent by filesystem mounted with discard option,
whenever some data blocks are getting discarded.
What: /sys/block/zram<id>/zero_pages
Date: August 2010
Contact: Nitin Gupta <ngupta@vflare.org>
Description:
The zero_pages file is read-only and specifies number of zero
filled pages written to this disk. No memory is allocated for
such pages.
What: /sys/block/zram<id>/orig_data_size
Date: August 2010
Contact: Nitin Gupta <ngupta@vflare.org>
Description:
The orig_data_size file is read-only and specifies uncompressed
size of data stored in this disk. This excludes zero-filled
pages (zero_pages) since no memory is allocated for them.
Unit: bytes
What: /sys/block/zram<id>/compr_data_size
Date: August 2010
Contact: Nitin Gupta <ngupta@vflare.org>
Description:
The compr_data_size file is read-only and specifies compressed
size of data stored in this disk. So, compression ratio can be
calculated using orig_data_size and this statistic.
Unit: bytes
What: /sys/block/zram<id>/mem_used_total
Date: August 2010
Contact: Nitin Gupta <ngupta@vflare.org>
Description:
The mem_used_total file is read-only and specifies the amount
of memory, including allocator fragmentation and metadata
overhead, allocated for this disk. So, allocator space
efficiency can be calculated using compr_data_size and this
statistic.
Unit: bytes
What: /sys/block/zram<id>/mem_used_max
Date: August 2014
Contact: Minchan Kim <minchan@kernel.org>
Description:
The mem_used_max file is read/write and specifies the amount
of maximum memory zram have consumed to store compressed data.
For resetting the value, you should write "0". Otherwise,
you could see -EINVAL.
The mem_used_max file is write-only and is used to reset
the counter of maximum memory zram have consumed to store
compressed data. For resetting the value, you should write
"0". Otherwise, you could see -EINVAL.
Unit: bytes
What: /sys/block/zram<id>/mem_limit
Date: August 2014
Contact: Minchan Kim <minchan@kernel.org>
Description:
The mem_limit file is read/write and specifies the maximum
amount of memory ZRAM can use to store the compressed data. The
limit could be changed in run time and "0" means disable the
limit. No limit is the initial state. Unit: bytes
The mem_limit file is write-only and specifies the maximum
amount of memory ZRAM can use to store the compressed data.
The limit could be changed in run time and "0" means disable
the limit. No limit is the initial state. Unit: bytes
What: /sys/block/zram<id>/compact
Date: August 2015

View file

@ -161,42 +161,14 @@ Name access description
disksize RW show and set the device's disk size
initstate RO shows the initialization state of the device
reset WO trigger device reset
num_reads RO the number of reads
failed_reads RO the number of failed reads
num_write RO the number of writes
failed_writes RO the number of failed writes
invalid_io RO the number of non-page-size-aligned I/O requests
mem_used_max WO reset the `mem_used_max' counter (see later)
mem_limit WO specifies the maximum amount of memory ZRAM can use
to store the compressed data
max_comp_streams RW the number of possible concurrent compress operations
comp_algorithm RW show and change the compression algorithm
notify_free RO the number of notifications to free pages (either
slot free notifications or REQ_DISCARD requests)
zero_pages RO the number of zero filled pages written to this disk
orig_data_size RO uncompressed size of data stored in this disk
compr_data_size RO compressed size of data stored in this disk
mem_used_total RO the amount of memory allocated for this disk
mem_used_max RW the maximum amount of memory zram have consumed to
store the data (to reset this counter to the actual
current value, write 1 to this attribute)
mem_limit RW the maximum amount of memory ZRAM can use to store
the compressed data
pages_compacted RO the number of pages freed during compaction
(available only via zram<id>/mm_stat node)
compact WO trigger memory compaction
debug_stat RO this file is used for zram debugging purposes
WARNING
=======
per-stat sysfs attributes are considered to be deprecated.
The basic strategy is:
-- the existing RW nodes will be downgraded to WO nodes (in linux 4.11)
-- deprecated RO sysfs nodes will eventually be removed (in linux 4.11)
The list of deprecated attributes can be found here:
Documentation/ABI/obsolete/sysfs-block-zram
Basically, every attribute that has its own read accessible sysfs node
(e.g. num_reads) *AND* is accessible via one of the stat files (zram<id>/stat
or zram<id>/io_stat or zram<id>/mm_stat) is considered to be deprecated.
User space is advised to use the following files to read the device statistics.
@ -211,22 +183,40 @@ The stat file represents device's I/O statistics not accounted by block
layer and, thus, not available in zram<id>/stat file. It consists of a
single line of text and contains the following stats separated by
whitespace:
failed_reads
failed_writes
invalid_io
notify_free
failed_reads the number of failed reads
failed_writes the number of failed writes
invalid_io the number of non-page-size-aligned I/O requests
notify_free Depending on device usage scenario it may account
a) the number of pages freed because of swap slot free
notifications or b) the number of pages freed because of
REQ_DISCARD requests sent by bio. The former ones are
sent to a swap block device when a swap slot is freed,
which implies that this disk is being used as a swap disk.
The latter ones are sent by filesystem mounted with
discard option, whenever some data blocks are getting
discarded.
File /sys/block/zram<id>/mm_stat
The stat file represents device's mm statistics. It consists of a single
line of text and contains the following stats separated by whitespace:
orig_data_size
compr_data_size
mem_used_total
mem_limit
mem_used_max
zero_pages
num_migrated
orig_data_size uncompressed size of data stored in this disk.
This excludes zero-filled pages (zero_pages) since no
memory is allocated for them.
Unit: bytes
compr_data_size compressed size of data stored in this disk
mem_used_total the amount of memory allocated for this disk. This
includes allocator fragmentation and metadata overhead,
allocated for this disk. So, allocator space efficiency
can be calculated using compr_data_size and this statistic.
Unit: bytes
mem_limit the maximum amount of memory ZRAM can use to store
the compressed data
mem_used_max the maximum amount of memory zram have consumed to
store the data
zero_pages the number of zero filled pages written to this disk.
No memory is allocated for such pages.
pages_compacted the number of pages freed during compaction
9) Deactivate:
swapoff /dev/zram0

View file

@ -45,27 +45,6 @@ static const char *default_compressor = "lzo";
/* Module params (documentation at end) */
static unsigned int num_devices = 1;
static inline void deprecated_attr_warn(const char *name)
{
pr_warn_once("%d (%s) Attribute %s (and others) will be removed. %s\n",
task_pid_nr(current),
current->comm,
name,
"See zram documentation.");
}
#define ZRAM_ATTR_RO(name) \
static ssize_t name##_show(struct device *d, \
struct device_attribute *attr, char *b) \
{ \
struct zram *zram = dev_to_zram(d); \
\
deprecated_attr_warn(__stringify(name)); \
return scnprintf(b, PAGE_SIZE, "%llu\n", \
(u64)atomic64_read(&zram->stats.name)); \
} \
static DEVICE_ATTR_RO(name);
static inline bool init_done(struct zram *zram)
{
return zram->disksize;
@ -218,47 +197,6 @@ static ssize_t disksize_show(struct device *dev,
return scnprintf(buf, PAGE_SIZE, "%llu\n", zram->disksize);
}
static ssize_t orig_data_size_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct zram *zram = dev_to_zram(dev);
deprecated_attr_warn("orig_data_size");
return scnprintf(buf, PAGE_SIZE, "%llu\n",
(u64)(atomic64_read(&zram->stats.pages_stored)) << PAGE_SHIFT);
}
static ssize_t mem_used_total_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
u64 val = 0;
struct zram *zram = dev_to_zram(dev);
deprecated_attr_warn("mem_used_total");
down_read(&zram->init_lock);
if (init_done(zram)) {
struct zram_meta *meta = zram->meta;
val = zs_get_total_pages(meta->mem_pool);
}
up_read(&zram->init_lock);
return scnprintf(buf, PAGE_SIZE, "%llu\n", val << PAGE_SHIFT);
}
static ssize_t mem_limit_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
u64 val;
struct zram *zram = dev_to_zram(dev);
deprecated_attr_warn("mem_limit");
down_read(&zram->init_lock);
val = zram->limit_pages;
up_read(&zram->init_lock);
return scnprintf(buf, PAGE_SIZE, "%llu\n", val << PAGE_SHIFT);
}
static ssize_t mem_limit_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t len)
{
@ -277,21 +215,6 @@ static ssize_t mem_limit_store(struct device *dev,
return len;
}
static ssize_t mem_used_max_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
u64 val = 0;
struct zram *zram = dev_to_zram(dev);
deprecated_attr_warn("mem_used_max");
down_read(&zram->init_lock);
if (init_done(zram))
val = atomic_long_read(&zram->stats.max_used_pages);
up_read(&zram->init_lock);
return scnprintf(buf, PAGE_SIZE, "%llu\n", val << PAGE_SHIFT);
}
static ssize_t mem_used_max_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t len)
{
@ -467,14 +390,6 @@ static ssize_t debug_stat_show(struct device *dev,
static DEVICE_ATTR_RO(io_stat);
static DEVICE_ATTR_RO(mm_stat);
static DEVICE_ATTR_RO(debug_stat);
ZRAM_ATTR_RO(num_reads);
ZRAM_ATTR_RO(num_writes);
ZRAM_ATTR_RO(failed_reads);
ZRAM_ATTR_RO(failed_writes);
ZRAM_ATTR_RO(invalid_io);
ZRAM_ATTR_RO(notify_free);
ZRAM_ATTR_RO(zero_pages);
ZRAM_ATTR_RO(compr_data_size);
static inline bool zram_meta_get(struct zram *zram)
{
@ -1188,10 +1103,8 @@ static DEVICE_ATTR_WO(compact);
static DEVICE_ATTR_RW(disksize);
static DEVICE_ATTR_RO(initstate);
static DEVICE_ATTR_WO(reset);
static DEVICE_ATTR_RO(orig_data_size);
static DEVICE_ATTR_RO(mem_used_total);
static DEVICE_ATTR_RW(mem_limit);
static DEVICE_ATTR_RW(mem_used_max);
static DEVICE_ATTR_WO(mem_limit);
static DEVICE_ATTR_WO(mem_used_max);
static DEVICE_ATTR_RW(max_comp_streams);
static DEVICE_ATTR_RW(comp_algorithm);
@ -1199,17 +1112,7 @@ static struct attribute *zram_disk_attrs[] = {
&dev_attr_disksize.attr,
&dev_attr_initstate.attr,
&dev_attr_reset.attr,
&dev_attr_num_reads.attr,
&dev_attr_num_writes.attr,
&dev_attr_failed_reads.attr,
&dev_attr_failed_writes.attr,
&dev_attr_compact.attr,
&dev_attr_invalid_io.attr,
&dev_attr_notify_free.attr,
&dev_attr_zero_pages.attr,
&dev_attr_orig_data_size.attr,
&dev_attr_compr_data_size.attr,
&dev_attr_mem_used_total.attr,
&dev_attr_mem_limit.attr,
&dev_attr_mem_used_max.attr,
&dev_attr_max_comp_streams.attr,