Merge branch 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/pasemi into for-2.6.25

arch/powerpc/platforms/pasemi/Kconfig

@@ -17,7 +17,7 @@ config PPC_PASEMI_IOMMU
 	bool "PA Semi IOMMU support"
 	depends on PPC_PASEMI
 	help
-	  IOMMU support for PA6T-1682M
+	  IOMMU support for PA Semi PWRficient
 
 config PPC_PASEMI_IOMMU_DMA_FORCE
 	bool "Force DMA engine to use IOMMU"

arch/powerpc/platforms/pasemi/cpufreq.c

@@ -32,6 +32,7 @@
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/time.h>
+#include <asm/smp.h>
 
 #define SDCASR_REG		0x0100
 #define SDCASR_REG_STRIDE	0x1000
@@ -124,6 +125,11 @@ static void set_astate(int cpu, unsigned int astate)
 	local_irq_restore(flags);
 }
 
+int check_astate(void)
+{
+	return get_cur_astate(hard_smp_processor_id());
+}
+
 void restore_astate(int cpu)
 {
 	set_astate(cpu, current_astate);
@@ -147,7 +153,10 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	if (!cpu)
 		goto out;
 
-	dn = of_find_compatible_node(NULL, "sdc", "1682m-sdc");
+	dn = of_find_compatible_node(NULL, NULL, "1682m-sdc");
+	if (!dn)
+		dn = of_find_compatible_node(NULL, NULL,
+					     "pasemi,pwrficient-sdc");
 	if (!dn)
 		goto out;
 	err = of_address_to_resource(dn, 0, &res);
@@ -160,7 +169,10 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
 		goto out;
 	}
 
-	dn = of_find_compatible_node(NULL, "gizmo", "1682m-gizmo");
+	dn = of_find_compatible_node(NULL, NULL, "1682m-gizmo");
+	if (!dn)
+		dn = of_find_compatible_node(NULL, NULL,
+					     "pasemi,pwrficient-gizmo");
 	if (!dn) {
 		err = -ENODEV;
 		goto out_unmap_sdcasr;
@@ -292,7 +304,8 @@ static struct cpufreq_driver pas_cpufreq_driver = {
 
 static int __init pas_cpufreq_init(void)
 {
-	if (!machine_is_compatible("PA6T-1682M"))
+	if (!machine_is_compatible("PA6T-1682M") &&
+	    !machine_is_compatible("pasemi,pwrficient"))
 		return -ENODEV;
 
 	return cpufreq_register_driver(&pas_cpufreq_driver);

arch/powerpc/platforms/pasemi/gpio_mdio.c

@@ -218,45 +218,27 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
 				     const struct of_device_id *match)
 {
 	struct device *dev = &ofdev->dev;
-	struct device_node *np = ofdev->node;
+	struct device_node *phy_dn, *np = ofdev->node;
-	struct device_node *gpio_np;
 	struct mii_bus *new_bus;
-	struct resource res;
 	struct gpio_priv *priv;
 	const unsigned int *prop;
-	int err = 0;
+	int err;
 	int i;
 
-	gpio_np = of_find_compatible_node(NULL, "gpio", "1682m-gpio");
+	err = -ENOMEM;
-
-	if (!gpio_np)
-		return -ENODEV;
-
-	err = of_address_to_resource(gpio_np, 0, &res);
-	of_node_put(gpio_np);
-
-	if (err)
-		return -EINVAL;
-
-	if (!gpio_regs)
-		gpio_regs = ioremap(res.start, 0x100);
-
-	if (!gpio_regs)
-		return -EPERM;
-
 	priv = kzalloc(sizeof(struct gpio_priv), GFP_KERNEL);
-	if (priv == NULL)
+	if (!priv)
-		return -ENOMEM;
+		goto out;
 
 	new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
 
-	if (new_bus == NULL)
+	if (!new_bus)
-		return -ENOMEM;
+		goto out_free_priv;
 
-	new_bus->name = "pasemi gpio mdio bus",
+	new_bus->name = "pasemi gpio mdio bus";
-	new_bus->read = &gpio_mdio_read,
+	new_bus->read = &gpio_mdio_read;
-	new_bus->write = &gpio_mdio_write,
+	new_bus->write = &gpio_mdio_write;
-	new_bus->reset = &gpio_mdio_reset,
+	new_bus->reset = &gpio_mdio_reset;
 
 	prop = of_get_property(np, "reg", NULL);
 	new_bus->id = *prop;
@@ -265,9 +247,24 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
 	new_bus->phy_mask = 0;
 
 	new_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
-	for(i = 0; i < PHY_MAX_ADDR; ++i)
-		new_bus->irq[i] = irq_create_mapping(NULL, 10);
 
+	if (!new_bus->irq)
+		goto out_free_bus;
+
+	for (i = 0; i < PHY_MAX_ADDR; i++)
+		new_bus->irq[i] = NO_IRQ;
+
+	for (phy_dn = of_get_next_child(np, NULL);
+	     phy_dn != NULL;
+	     phy_dn = of_get_next_child(np, phy_dn)) {
+		const unsigned int *ip, *regp;
+
+		ip = of_get_property(phy_dn, "interrupts", NULL);
+		regp = of_get_property(phy_dn, "reg", NULL);
+		if (!ip || !regp || *regp >= PHY_MAX_ADDR)
+			continue;
+		new_bus->irq[*regp] = irq_create_mapping(NULL, *ip);
+	}
 
 	prop = of_get_property(np, "mdc-pin", NULL);
 	priv->mdc_pin = *prop;
@@ -280,17 +277,21 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
 
 	err = mdiobus_register(new_bus);
 
-	if (0 != err) {
+	if (err != 0) {
 		printk(KERN_ERR "%s: Cannot register as MDIO bus, err %d\n",
 				new_bus->name, err);
-		goto bus_register_fail;
+		goto out_free_irq;
 	}
 
 	return 0;
 
-bus_register_fail:
+out_free_irq:
+	kfree(new_bus->irq);
+out_free_bus:
 	kfree(new_bus);
-
+out_free_priv:
+	kfree(priv);
+out:
 	return err;
 }
 
@@ -317,6 +318,7 @@ static struct of_device_id gpio_mdio_match[] =
 	},
 	{},
 };
+MODULE_DEVICE_TABLE(of, gpio_mdio_match);
 
 static struct of_platform_driver gpio_mdio_driver =
 {
@@ -330,12 +332,32 @@ static struct of_platform_driver gpio_mdio_driver =
 
 int gpio_mdio_init(void)
 {
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "1682m-gpio");
+	if (!np)
+		np = of_find_compatible_node(NULL, NULL,
+					     "pasemi,pwrficient-gpio");
+	if (!np)
+		return -ENODEV;
+	gpio_regs = of_iomap(np, 0);
+	of_node_put(np);
+
+	if (!gpio_regs)
+		return -ENODEV;
+
 	return of_register_platform_driver(&gpio_mdio_driver);
 }
+module_init(gpio_mdio_init);
 
 void gpio_mdio_exit(void)
 {
 	of_unregister_platform_driver(&gpio_mdio_driver);
+	if (gpio_regs)
+		iounmap(gpio_regs);
 }
-device_initcall(gpio_mdio_init);
+module_exit(gpio_mdio_exit);
 
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Olof Johansson <olof@lixom.net>");
+MODULE_DESCRIPTION("Driver for MDIO over GPIO on PA Semi PWRficient-based boards");

arch/powerpc/platforms/pasemi/pasemi.h

@@ -16,8 +16,14 @@ extern void idle_doze(void);
 
 /* Restore astate to last set */
 #ifdef CONFIG_PPC_PASEMI_CPUFREQ
+extern int check_astate(void);
 extern void restore_astate(int cpu);
 #else
+static inline int check_astate(void)
+{
+	/* Always return >0 so we never power save */
+	return 1;
+}
 static inline void restore_astate(int cpu)
 {
 }

arch/powerpc/platforms/pasemi/powersave.S

@@ -62,7 +62,16 @@ sleep_common:
 	mflr	r0
 	std	r0, 16(r1)
 	stdu	r1,-64(r1)
+#ifdef CONFIG_PPC_PASEMI_CPUFREQ
+	std	r3, 48(r1)
 
+	/* Only do power savings when in astate 0 */
+	bl	.check_astate
+	cmpwi	r3,0
+	bne	1f
+
+	ld	r3, 48(r1)
+#endif
 	LOAD_REG_IMMEDIATE(r6,MSR_DR|MSR_IR|MSR_ME|MSR_EE)
 	mfmsr	r4
 	andc	r5,r4,r6
@@ -73,7 +82,7 @@ sleep_common:
 
 	mtmsrd	r4,0
 
-	addi	r1,r1,64
+1:	addi	r1,r1,64
 	ld	r0,16(r1)
 	mtlr	r0
 	blr

arch/powerpc/platforms/pasemi/setup.c

@@ -43,6 +43,10 @@
 
 #include "pasemi.h"
 
+#if !defined(CONFIG_SMP)
+static void smp_send_stop(void) {}
+#endif
+
 /* SDC reset register, must be pre-mapped at reset time */
 static void __iomem *reset_reg;
 
@@ -60,6 +64,9 @@ static int num_mce_regs;
 
 static void pas_restart(char *cmd)
 {
+	/* Need to put others cpu in hold loop so they're not sleeping */
+	smp_send_stop();
+	udelay(10000);
 	printk("Restarting...\n");
 	while (1)
 		out_le32(reset_reg, 0x6000000);
@@ -362,8 +369,12 @@ static inline void pasemi_pcmcia_init(void)
 
 
 static struct of_device_id pasemi_bus_ids[] = {
+	/* Unfortunately needed for legacy firmwares */
 	{ .type = "localbus", },
 	{ .type = "sdc", },
+	/* These are the proper entries, which newer firmware uses */
+	{ .compatible = "pasemi,localbus", },
+	{ .compatible = "pasemi,sdc", },
 	{},
 };
 
@@ -389,7 +400,8 @@ static int __init pas_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	if (!of_flat_dt_is_compatible(root, "PA6T-1682M"))
+	if (!of_flat_dt_is_compatible(root, "PA6T-1682M") &&
+	    !of_flat_dt_is_compatible(root, "pasemi,pwrficient"))
 		return 0;
 
 	hpte_init_native();
@@ -400,7 +412,7 @@ static int __init pas_probe(void)
 }
 
 define_machine(pasemi) {
-	.name			= "PA Semi PA6T-1682M",
+	.name			= "PA Semi PWRficient",
 	.probe			= pas_probe,
 	.setup_arch		= pas_setup_arch,
 	.init_early		= pas_init_early,

drivers/char/hw_random/Kconfig

@@ -98,7 +98,7 @@ config HW_RANDOM_PASEMI
 	default HW_RANDOM
 	---help---
 	  This driver provides kernel-side support for the Random Number
-	  Generator hardware found on PA6T-1682M processor.
+	  Generator hardware found on PA Semi PWRficient SoCs.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called pasemi-rng.

drivers/char/hw_random/pasemi-rng.c

@@ -126,10 +126,9 @@ static int __devexit rng_remove(struct of_device *dev)
 }
 
 static struct of_device_id rng_match[] = {
-	{
+	{ .compatible      = "1682m-rng", },
-		.compatible      = "1682m-rng",
+	{ .compatible      = "pasemi,pwrficient-rng", },
-	},
+	{ },
-	{},
 };
 
 static struct of_platform_driver rng_driver = {

drivers/edac/pasemi_edac.c

@@ -225,7 +225,7 @@ static int __devinit pasemi_edac_probe(struct pci_dev *pdev,
 		EDAC_FLAG_NONE;
 	mci->mod_name = MODULE_NAME;
 	mci->dev_name = pci_name(pdev);
-	mci->ctl_name = "pasemi,1682m-mc";
+	mci->ctl_name = "pasemi,pwrficient-mc";
 	mci->edac_check = pasemi_edac_check;
 	mci->ctl_page_to_phys = NULL;
 	pci_read_config_dword(pdev, MCCFG_SCRUB, &scrub);
@@ -297,4 +297,4 @@ module_exit(pasemi_edac_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Egor Martovetsky <egor@pasemi.com>");
-MODULE_DESCRIPTION("MC support for PA Semi PA6T-1682M memory controller");
+MODULE_DESCRIPTION("MC support for PA Semi PWRficient memory controller");