From dadab2d4e3cf708ceba22ecddd94aedfecb39199 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 14 Dec 2016 13:28:05 +0100 Subject: [PATCH 01/10] spi: SPI_FSL_DSPI should depend on HAS_DMA If NO_DMA=y: ERROR: "bad_dma_ops" [drivers/spi/spi-fsl-dspi.ko] undefined! Add a dependency on HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- drivers/spi/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index ec4aa252d6e8..2922a9908302 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -378,6 +378,7 @@ config SPI_FSL_SPI config SPI_FSL_DSPI tristate "Freescale DSPI controller" select REGMAP_MMIO + depends on HAS_DMA depends on SOC_VF610 || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST help This enables support for the Freescale DSPI controller in master From 4286db8456f4fa0c6af2b6b9abc5991a7e7da69c Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Mon, 12 Dec 2016 10:49:35 +0100 Subject: [PATCH 02/10] spi: sh-msiof: Add R-Car Gen 2 and 3 fallback bindings In the case of Renesas R-Car hardware we know that there are generations of SoCs, e.g. Gen 2 and Gen 3. But beyond that it's not clear what the relationship between IP blocks might be. For example, I believe that r8a7790 is older than r8a7791 but that doesn't imply that the latter is a descendant of the former or vice versa. We can, however, by examining the documentation and behaviour of the hardware at run-time observe that the current driver implementation appears to be compatible with the IP blocks on SoCs within a given generation. For the above reasons and convenience when enabling new SoCs a per-generation fallback compatibility string scheme is being adopted for drivers for Renesas SoCs. Also: * Deprecate renesas,sh-msiof. It seems poorly named as it is only compatible with SH-Mobile. It also appears unused in mainline. Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- .../devicetree/bindings/spi/sh-msiof.txt | 19 +++++++++++++------ drivers/spi/spi-sh-msiof.c | 4 +++- 2 files changed, 16 insertions(+), 7 deletions(-) diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt index da6614c63796..dc975064fa27 100644 --- a/Documentation/devicetree/bindings/spi/sh-msiof.txt +++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt @@ -1,17 +1,23 @@ Renesas MSIOF spi controller Required properties: -- compatible : "renesas,msiof-" for SoCs, - "renesas,sh-msiof" for SuperH, or - "renesas,sh-mobile-msiof" for SH Mobile series. - Examples with soctypes are: - "renesas,msiof-r8a7790" (R-Car H2) +- compatible : "renesas,msiof-r8a7790" (R-Car H2) "renesas,msiof-r8a7791" (R-Car M2-W) "renesas,msiof-r8a7792" (R-Car V2H) "renesas,msiof-r8a7793" (R-Car M2-N) "renesas,msiof-r8a7794" (R-Car E2) "renesas,msiof-r8a7796" (R-Car M3-W) "renesas,msiof-sh73a0" (SH-Mobile AG5) + "renesas,sh-mobile-msiof" (generic SH-Mobile compatibile device) + "renesas,rcar-gen2-msiof" (generic R-Car Gen2 compatible device) + "renesas,rcar-gen3-msiof" (generic R-Car Gen3 compatible device) + "renesas,sh-msiof" (deprecated) + + When compatible with the generic version, nodes + must list the SoC-specific version corresponding + to the platform first followed by the generic + version. + - reg : A list of offsets and lengths of the register sets for the device. If only one register set is present, it is to be used @@ -61,7 +67,8 @@ Documentation/devicetree/bindings/pinctrl/renesas,*. Example: msiof0: spi@e6e20000 { - compatible = "renesas,msiof-r8a7791"; + compatible = "renesas,msiof-r8a7791", + "renesas,rcar-gen2-msiof"; reg = <0 0xe6e20000 0 0x0064>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index 0012ad02e569..471ca211b76c 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -973,14 +973,16 @@ static const struct sh_msiof_chipdata r8a779x_data = { }; static const struct of_device_id sh_msiof_match[] = { - { .compatible = "renesas,sh-msiof", .data = &sh_data }, { .compatible = "renesas,sh-mobile-msiof", .data = &sh_data }, { .compatible = "renesas,msiof-r8a7790", .data = &r8a779x_data }, { .compatible = "renesas,msiof-r8a7791", .data = &r8a779x_data }, { .compatible = "renesas,msiof-r8a7792", .data = &r8a779x_data }, { .compatible = "renesas,msiof-r8a7793", .data = &r8a779x_data }, { .compatible = "renesas,msiof-r8a7794", .data = &r8a779x_data }, + { .compatible = "renesas,rcar-gen2-msiof", .data = &r8a779x_data }, { .compatible = "renesas,msiof-r8a7796", .data = &r8a779x_data }, + { .compatible = "renesas,rcar-gen3-msiof", .data = &r8a779x_data }, + { .compatible = "renesas,sh-msiof", .data = &sh_data }, // Deprecated {}, }; MODULE_DEVICE_TABLE(of, sh_msiof_match); From f6f0083cca66e673cca6fa26b52b107b5570081d Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 13 Dec 2016 10:28:12 +0000 Subject: [PATCH 03/10] spi: armada-3700: fix unsigned compare than zero on irq spi->irq is an unsigned integer hence the check if status is less than zero has no effect. Fix this by replacing spi->irq with an int irq so the less than zero compare will correctly detect errors. Issue found with static analysis with CoverityScan, CID1388567 Signed-off-by: Colin Ian King Acked-by: Romain Perier Signed-off-by: Mark Brown --- drivers/spi/spi-armada-3700.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/spi/spi-armada-3700.c b/drivers/spi/spi-armada-3700.c index e89da0af45d2..4e921782652f 100644 --- a/drivers/spi/spi-armada-3700.c +++ b/drivers/spi/spi-armada-3700.c @@ -800,7 +800,7 @@ static int a3700_spi_probe(struct platform_device *pdev) struct spi_master *master; struct a3700_spi *spi; u32 num_cs = 0; - int ret = 0; + int irq, ret = 0; master = spi_alloc_master(dev, sizeof(*spi)); if (!master) { @@ -846,12 +846,13 @@ static int a3700_spi_probe(struct platform_device *pdev) goto error; } - spi->irq = platform_get_irq(pdev, 0); - if (spi->irq < 0) { - dev_err(dev, "could not get irq: %d\n", spi->irq); + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(dev, "could not get irq: %d\n", irq); ret = -ENXIO; goto error; } + spi->irq = irq; init_completion(&spi->done); From 42cd4ed888393b2bc8ddfd277aa2d0ec0c7e0259 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 16 Dec 2016 12:33:25 +0300 Subject: [PATCH 04/10] spi: armada-3700: Set mode bits correctly We set SPI_RX_DUAL twice instead of setting SPI_TX_DUAL. Fixes: 5762ab71eb24 ("spi: Add support for Armada 3700 SPI Controller") Signed-off-by: Dan Carpenter Acked-by: Romain Perier Signed-off-by: Mark Brown --- drivers/spi/spi-armada-3700.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-armada-3700.c b/drivers/spi/spi-armada-3700.c index 4e921782652f..0314c6b9e044 100644 --- a/drivers/spi/spi-armada-3700.c +++ b/drivers/spi/spi-armada-3700.c @@ -825,7 +825,7 @@ static int a3700_spi_probe(struct platform_device *pdev) master->unprepare_message = a3700_spi_unprepare_message; master->set_cs = a3700_spi_set_cs; master->flags = SPI_MASTER_HALF_DUPLEX; - master->mode_bits |= (SPI_RX_DUAL | SPI_RX_DUAL | + master->mode_bits |= (SPI_RX_DUAL | SPI_TX_DUAL | SPI_RX_QUAD | SPI_TX_QUAD); platform_set_drvdata(pdev, master); From 264c3e8de4fbda1d1342213c78fb3788a43cfd41 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Tue, 20 Dec 2016 11:21:16 +0100 Subject: [PATCH 05/10] spi: sh-msiof: Do not use C++ style comment 4286db8456f4 ("spi: sh-msiof: Add R-Car Gen 2 and 3 fallback bindings") added a C++ style comment. This is not in keeping with the style used for comments elsewhere in this fine. Update it accordingly. Signed-off-by: Simon Horman Signed-off-by: Mark Brown --- drivers/spi/spi-sh-msiof.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index 471ca211b76c..1f00eeb0b5a3 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -982,7 +982,7 @@ static const struct of_device_id sh_msiof_match[] = { { .compatible = "renesas,rcar-gen2-msiof", .data = &r8a779x_data }, { .compatible = "renesas,msiof-r8a7796", .data = &r8a779x_data }, { .compatible = "renesas,rcar-gen3-msiof", .data = &r8a779x_data }, - { .compatible = "renesas,sh-msiof", .data = &sh_data }, // Deprecated + { .compatible = "renesas,sh-msiof", .data = &sh_data }, /* Deprecated */ {}, }; MODULE_DEVICE_TABLE(of, sh_msiof_match); From 13288bdf4adbaa6bd1267f10044c1bc25d90ce7f Mon Sep 17 00:00:00 2001 From: Phil Reid Date: Thu, 22 Dec 2016 17:18:12 +0800 Subject: [PATCH 06/10] spi: dw: Make debugfs name unique between instances Some system have multiple dw devices. Currently the driver uses a fixed name for the debugfs dir. Append dev name to the debugfs dir name to make it unique. Signed-off-by: Phil Reid Signed-off-by: Mark Brown --- drivers/spi/spi-dw.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c index b715a26a9148..054012f87567 100644 --- a/drivers/spi/spi-dw.c +++ b/drivers/spi/spi-dw.c @@ -107,7 +107,10 @@ static const struct file_operations dw_spi_regs_ops = { static int dw_spi_debugfs_init(struct dw_spi *dws) { - dws->debugfs = debugfs_create_dir("dw_spi", NULL); + char name[128]; + + snprintf(name, 128, "dw_spi-%s", dev_name(&dws->master->dev)); + dws->debugfs = debugfs_create_dir(name, NULL); if (!dws->debugfs) return -ENOMEM; From cf1716e9dae5b21b9bbcfe5eb0106c3b0aee37e8 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 3 Jan 2017 15:48:20 +0200 Subject: [PATCH 07/10] spi: dw-mid: switch to new dmaengine_terminate_* API (part 2) The commit a3ff9582369e ("spi: dw-mid: switch to new dmaengine_terminate_* API") converted mid_spi_dma_exit() but missed mid_spi_dma_stop(). This is follow up to convert the rest. Fixes: a3ff9582369e ("spi: dw-mid: switch to new dmaengine_terminate_* API") Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-dw-mid.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c index e31971f91475..837cb8d0bac6 100644 --- a/drivers/spi/spi-dw-mid.c +++ b/drivers/spi/spi-dw-mid.c @@ -274,11 +274,11 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, struct spi_transfer *xfer) static void mid_spi_dma_stop(struct dw_spi *dws) { if (test_bit(TX_BUSY, &dws->dma_chan_busy)) { - dmaengine_terminate_all(dws->txchan); + dmaengine_terminate_sync(dws->txchan); clear_bit(TX_BUSY, &dws->dma_chan_busy); } if (test_bit(RX_BUSY, &dws->dma_chan_busy)) { - dmaengine_terminate_all(dws->rxchan); + dmaengine_terminate_sync(dws->rxchan); clear_bit(RX_BUSY, &dws->dma_chan_busy); } } From a2dd8af00ca7fff4972425a4a6b19dd1840dc807 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Mon, 2 Jan 2017 13:44:28 +0200 Subject: [PATCH 08/10] spi: pxa2xx: add missed break The commit 7c7289a40425 ("spi: pxa2xx: Default thresholds to PXA configuration") while splitting up CE4100 code obviously missed a break condition in one chunk. Add it here. Looks like we have no active user of CE4100, though better to fix this later than never. Fixes: commit 7c7289a40425 ("spi: pxa2xx: Default thresholds to PXA configuration") Signed-off-by: Andy Shevchenko Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index dd7b5b47291d..d6239fa718be 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1690,6 +1690,7 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) pxa2xx_spi_write(drv_data, SSCR1, tmp); tmp = SSCR0_SCR(2) | SSCR0_Motorola | SSCR0_DataSize(8); pxa2xx_spi_write(drv_data, SSCR0, tmp); + break; default: tmp = SSCR1_RxTresh(RX_THRESH_DFLT) | SSCR1_TxTresh(TX_THRESH_DFLT); From 9620ca90115d4bd700f05862d3b210a266a66efe Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Mon, 9 Jan 2017 01:02:47 +0100 Subject: [PATCH 09/10] spi: spi-axi: Free resources on error path We should go to 'err_put_master' here instead of returning directly. Otherwise a call to 'spi_master_put' is missing. Signed-off-by: Christophe JAILLET Acked-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- drivers/spi/spi-axi-spi-engine.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-axi-spi-engine.c b/drivers/spi/spi-axi-spi-engine.c index 319225d7e761..6ab4c7700228 100644 --- a/drivers/spi/spi-axi-spi-engine.c +++ b/drivers/spi/spi-axi-spi-engine.c @@ -494,7 +494,8 @@ static int spi_engine_probe(struct platform_device *pdev) SPI_ENGINE_VERSION_MAJOR(version), SPI_ENGINE_VERSION_MINOR(version), SPI_ENGINE_VERSION_PATCH(version)); - return -ENODEV; + ret = -ENODEV; + goto err_put_master; } spi_engine->clk = devm_clk_get(&pdev->dev, "s_axi_aclk"); From c5a2a394835f473ae23931eda5066d3771d7b2f8 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 11 Jan 2017 18:18:40 -0800 Subject: [PATCH 10/10] spi: davinci: use dma_mapping_error() The correct error checking for dma_map_single() is to use dma_mapping_error(). Signed-off-by: Kevin Hilman Signed-off-by: Mark Brown --- drivers/spi/spi-davinci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c index d36c11b73a35..02fb96797ac8 100644 --- a/drivers/spi/spi-davinci.c +++ b/drivers/spi/spi-davinci.c @@ -646,7 +646,7 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t) buf = t->rx_buf; t->rx_dma = dma_map_single(&spi->dev, buf, t->len, DMA_FROM_DEVICE); - if (!t->rx_dma) { + if (dma_mapping_error(&spi->dev, !t->rx_dma)) { ret = -EFAULT; goto err_rx_map; } @@ -660,7 +660,7 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t) buf = (void *)t->tx_buf; t->tx_dma = dma_map_single(&spi->dev, buf, t->len, DMA_TO_DEVICE); - if (!t->tx_dma) { + if (dma_mapping_error(&spi->dev, t->tx_dma)) { ret = -EFAULT; goto err_tx_map; }