diff --git a/Documentation/devicetree/bindings/sound/rt5677.txt b/Documentation/devicetree/bindings/sound/rt5677.txt index 740ff771aa8b..f07078997f87 100644 --- a/Documentation/devicetree/bindings/sound/rt5677.txt +++ b/Documentation/devicetree/bindings/sound/rt5677.txt @@ -18,6 +18,7 @@ Required properties: Optional properties: - realtek,pow-ldo2-gpio : The GPIO that controls the CODEC's POW_LDO2 pin. +- realtek,reset-gpio : The GPIO that controls the CODEC's RESET pin. - realtek,in1-differential - realtek,in2-differential @@ -70,6 +71,7 @@ rt5677 { realtek,pow-ldo2-gpio = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; + realtek,reset-gpio = <&gpio TEGRA_GPIO(BB, 3) GPIO_ACTIVE_LOW>; realtek,in1-differential = "true"; realtek,gpio-config = /bits/ 8 <0 0 0 0 0 2>; /* pull up GPIO6 */ realtek,jd2-gpio = <3>; /* Enables Jack detection for GPIO6 */ diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c index fe5581675983..31d969ac1192 100644 --- a/sound/soc/codecs/rt5677.c +++ b/sound/soc/codecs/rt5677.c @@ -1060,6 +1060,7 @@ int rt5677_sel_asrc_clk_src(struct snd_soc_codec *codec, unsigned int asrc5_mask = 0, asrc5_value = 0; unsigned int asrc6_mask = 0, asrc6_value = 0; unsigned int asrc7_mask = 0, asrc7_value = 0; + unsigned int asrc8_mask = 0, asrc8_value = 0; switch (clk_src) { case RT5677_CLK_SEL_SYS: @@ -1196,10 +1197,108 @@ int rt5677_sel_asrc_clk_src(struct snd_soc_codec *codec, regmap_update_bits(rt5677->regmap, RT5677_ASRC_7, asrc7_mask, asrc7_value); + /* ASRC 8 */ + if (filter_mask & RT5677_I2S1_SOURCE) { + asrc8_mask |= RT5677_I2S1_CLK_SEL_MASK; + asrc8_value = (asrc8_value & ~RT5677_I2S1_CLK_SEL_MASK) + | ((clk_src - 1) << RT5677_I2S1_CLK_SEL_SFT); + } + + if (filter_mask & RT5677_I2S2_SOURCE) { + asrc8_mask |= RT5677_I2S2_CLK_SEL_MASK; + asrc8_value = (asrc8_value & ~RT5677_I2S2_CLK_SEL_MASK) + | ((clk_src - 1) << RT5677_I2S2_CLK_SEL_SFT); + } + + if (filter_mask & RT5677_I2S3_SOURCE) { + asrc8_mask |= RT5677_I2S3_CLK_SEL_MASK; + asrc8_value = (asrc8_value & ~RT5677_I2S3_CLK_SEL_MASK) + | ((clk_src - 1) << RT5677_I2S3_CLK_SEL_SFT); + } + + if (filter_mask & RT5677_I2S4_SOURCE) { + asrc8_mask |= RT5677_I2S4_CLK_SEL_MASK; + asrc8_value = (asrc8_value & ~RT5677_I2S4_CLK_SEL_MASK) + | ((clk_src - 1) << RT5677_I2S4_CLK_SEL_SFT); + } + + if (asrc8_mask) + regmap_update_bits(rt5677->regmap, RT5677_ASRC_8, asrc8_mask, + asrc8_value); + return 0; } EXPORT_SYMBOL_GPL(rt5677_sel_asrc_clk_src); +static int rt5677_dmic_use_asrc(struct snd_soc_dapm_widget *source, + struct snd_soc_dapm_widget *sink) +{ + struct snd_soc_codec *codec = snd_soc_dapm_to_codec(source->dapm); + struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec); + unsigned int asrc_setting; + + switch (source->shift) { + case 11: + regmap_read(rt5677->regmap, RT5677_ASRC_5, &asrc_setting); + asrc_setting = (asrc_setting & RT5677_AD_STO1_CLK_SEL_MASK) >> + RT5677_AD_STO1_CLK_SEL_SFT; + if (asrc_setting >= RT5677_CLK_SEL_I2S1_ASRC && + asrc_setting <= RT5677_CLK_SEL_I2S6_ASRC) + return 1; + break; + + case 10: + regmap_read(rt5677->regmap, RT5677_ASRC_5, &asrc_setting); + asrc_setting = (asrc_setting & RT5677_AD_STO2_CLK_SEL_MASK) >> + RT5677_AD_STO2_CLK_SEL_SFT; + if (asrc_setting >= RT5677_CLK_SEL_I2S1_ASRC && + asrc_setting <= RT5677_CLK_SEL_I2S6_ASRC) + return 1; + break; + + case 9: + regmap_read(rt5677->regmap, RT5677_ASRC_5, &asrc_setting); + asrc_setting = (asrc_setting & RT5677_AD_STO3_CLK_SEL_MASK) >> + RT5677_AD_STO3_CLK_SEL_SFT; + if (asrc_setting >= RT5677_CLK_SEL_I2S1_ASRC && + asrc_setting <= RT5677_CLK_SEL_I2S6_ASRC) + return 1; + break; + + case 8: + regmap_read(rt5677->regmap, RT5677_ASRC_5, &asrc_setting); + asrc_setting = (asrc_setting & RT5677_AD_STO4_CLK_SEL_MASK) >> + RT5677_AD_STO4_CLK_SEL_SFT; + if (asrc_setting >= RT5677_CLK_SEL_I2S1_ASRC && + asrc_setting <= RT5677_CLK_SEL_I2S6_ASRC) + return 1; + break; + + case 7: + regmap_read(rt5677->regmap, RT5677_ASRC_6, &asrc_setting); + asrc_setting = (asrc_setting & RT5677_AD_MONOL_CLK_SEL_MASK) >> + RT5677_AD_MONOL_CLK_SEL_SFT; + if (asrc_setting >= RT5677_CLK_SEL_I2S1_ASRC && + asrc_setting <= RT5677_CLK_SEL_I2S6_ASRC) + return 1; + break; + + case 6: + regmap_read(rt5677->regmap, RT5677_ASRC_6, &asrc_setting); + asrc_setting = (asrc_setting & RT5677_AD_MONOR_CLK_SEL_MASK) >> + RT5677_AD_MONOR_CLK_SEL_SFT; + if (asrc_setting >= RT5677_CLK_SEL_I2S1_ASRC && + asrc_setting <= RT5677_CLK_SEL_I2S6_ASRC) + return 1; + break; + + default: + break; + } + + return 0; +} + /* Digital Mixer */ static const struct snd_kcontrol_new rt5677_sto1_adc_l_mix[] = { SOC_DAPM_SINGLE("ADC1 Switch", RT5677_STO1_ADC_MIXER, @@ -3057,12 +3156,12 @@ static const struct snd_soc_dapm_widget rt5677_dapm_widgets[] = { }; static const struct snd_soc_dapm_route rt5677_dapm_routes[] = { - { "Stereo1 DMIC Mux", NULL, "DMIC STO1 ASRC", can_use_asrc }, - { "Stereo2 DMIC Mux", NULL, "DMIC STO2 ASRC", can_use_asrc }, - { "Stereo3 DMIC Mux", NULL, "DMIC STO3 ASRC", can_use_asrc }, - { "Stereo4 DMIC Mux", NULL, "DMIC STO4 ASRC", can_use_asrc }, - { "Mono DMIC L Mux", NULL, "DMIC MONO L ASRC", can_use_asrc }, - { "Mono DMIC R Mux", NULL, "DMIC MONO R ASRC", can_use_asrc }, + { "Stereo1 DMIC Mux", NULL, "DMIC STO1 ASRC", rt5677_dmic_use_asrc }, + { "Stereo2 DMIC Mux", NULL, "DMIC STO2 ASRC", rt5677_dmic_use_asrc }, + { "Stereo3 DMIC Mux", NULL, "DMIC STO3 ASRC", rt5677_dmic_use_asrc }, + { "Stereo4 DMIC Mux", NULL, "DMIC STO4 ASRC", rt5677_dmic_use_asrc }, + { "Mono DMIC L Mux", NULL, "DMIC MONO L ASRC", rt5677_dmic_use_asrc }, + { "Mono DMIC R Mux", NULL, "DMIC MONO R ASRC", rt5677_dmic_use_asrc }, { "I2S1", NULL, "I2S1 ASRC", can_use_asrc}, { "I2S2", NULL, "I2S2 ASRC", can_use_asrc}, { "I2S3", NULL, "I2S3 ASRC", can_use_asrc}, @@ -4667,6 +4766,8 @@ static int rt5677_remove(struct snd_soc_codec *codec) regmap_write(rt5677->regmap, RT5677_RESET, 0x10ec); if (gpio_is_valid(rt5677->pow_ldo2)) gpio_set_value_cansleep(rt5677->pow_ldo2, 0); + if (gpio_is_valid(rt5677->reset_pin)) + gpio_set_value_cansleep(rt5677->reset_pin, 0); return 0; } @@ -4682,6 +4783,8 @@ static int rt5677_suspend(struct snd_soc_codec *codec) if (gpio_is_valid(rt5677->pow_ldo2)) gpio_set_value_cansleep(rt5677->pow_ldo2, 0); + if (gpio_is_valid(rt5677->reset_pin)) + gpio_set_value_cansleep(rt5677->reset_pin, 0); } return 0; @@ -4692,10 +4795,13 @@ static int rt5677_resume(struct snd_soc_codec *codec) struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec); if (!rt5677->dsp_vad_en) { - if (gpio_is_valid(rt5677->pow_ldo2)) { + if (gpio_is_valid(rt5677->pow_ldo2)) gpio_set_value_cansleep(rt5677->pow_ldo2, 1); + if (gpio_is_valid(rt5677->reset_pin)) + gpio_set_value_cansleep(rt5677->reset_pin, 1); + if (gpio_is_valid(rt5677->pow_ldo2) || + gpio_is_valid(rt5677->reset_pin)) msleep(10); - } regcache_cache_only(rt5677->regmap, false); regcache_sync(rt5677->regmap); @@ -4933,6 +5039,8 @@ static int rt5677_parse_dt(struct rt5677_priv *rt5677, struct device_node *np) rt5677->pow_ldo2 = of_get_named_gpio(np, "realtek,pow-ldo2-gpio", 0); + rt5677->reset_pin = of_get_named_gpio(np, + "realtek,reset-gpio", 0); /* * POW_LDO2 is optional (it may be statically tied on the board). @@ -4943,6 +5051,9 @@ static int rt5677_parse_dt(struct rt5677_priv *rt5677, struct device_node *np) if (!gpio_is_valid(rt5677->pow_ldo2) && (rt5677->pow_ldo2 != -ENOENT)) return rt5677->pow_ldo2; + if (!gpio_is_valid(rt5677->reset_pin) && + (rt5677->reset_pin != -ENOENT)) + return rt5677->reset_pin; of_property_read_u8_array(np, "realtek,gpio-config", rt5677->pdata.gpio_config, RT5677_GPIO_NUM); @@ -5044,6 +5155,7 @@ static int rt5677_i2c_probe(struct i2c_client *i2c, } } else { rt5677->pow_ldo2 = -EINVAL; + rt5677->reset_pin = -EINVAL; } if (gpio_is_valid(rt5677->pow_ldo2)) { @@ -5055,6 +5167,21 @@ static int rt5677_i2c_probe(struct i2c_client *i2c, rt5677->pow_ldo2, ret); return ret; } + } + + if (gpio_is_valid(rt5677->reset_pin)) { + ret = devm_gpio_request_one(&i2c->dev, rt5677->reset_pin, + GPIOF_OUT_INIT_HIGH, + "RT5677 RESET"); + if (ret < 0) { + dev_err(&i2c->dev, "Failed to request RESET %d: %d\n", + rt5677->reset_pin, ret); + return ret; + } + } + + if (gpio_is_valid(rt5677->pow_ldo2) || + gpio_is_valid(rt5677->reset_pin)) { /* Wait a while until I2C bus becomes available. The datasheet * does not specify the exact we should wait but startup * sequence mentiones at least a few milliseconds. diff --git a/sound/soc/codecs/rt5677.h b/sound/soc/codecs/rt5677.h index 9dceb41d18ea..7eca38a23255 100644 --- a/sound/soc/codecs/rt5677.h +++ b/sound/soc/codecs/rt5677.h @@ -1446,6 +1446,16 @@ #define RT5677_DSP_OB_4_7_CLK_SEL_MASK (0xf << 8) #define RT5677_DSP_OB_4_7_CLK_SEL_SFT 8 +/* ASRC Control 8 (0x8a) */ +#define RT5677_I2S1_CLK_SEL_MASK (0xf << 12) +#define RT5677_I2S1_CLK_SEL_SFT 12 +#define RT5677_I2S2_CLK_SEL_MASK (0xf << 8) +#define RT5677_I2S2_CLK_SEL_SFT 8 +#define RT5677_I2S3_CLK_SEL_MASK (0xf << 4) +#define RT5677_I2S3_CLK_SEL_SFT 4 +#define RT5677_I2S4_CLK_SEL_MASK (0xf) +#define RT5677_I2S4_CLK_SEL_SFT 0 + /* VAD Function Control 4 (0x9f) */ #define RT5677_VAD_SRC_MASK (0x7 << 8) #define RT5677_VAD_SRC_SFT 8 @@ -1744,6 +1754,10 @@ enum { RT5677_AD_MONO_R_FILTER = (0x1 << 12), RT5677_DSP_OB_0_3_FILTER = (0x1 << 13), RT5677_DSP_OB_4_7_FILTER = (0x1 << 14), + RT5677_I2S1_SOURCE = (0x1 << 15), + RT5677_I2S2_SOURCE = (0x1 << 16), + RT5677_I2S3_SOURCE = (0x1 << 17), + RT5677_I2S4_SOURCE = (0x1 << 18), }; struct rt5677_priv { @@ -1762,6 +1776,7 @@ struct rt5677_priv { int pll_in; int pll_out; int pow_ldo2; /* POW_LDO2 pin */ + int reset_pin; /* RESET pin */ enum rt5677_type type; #ifdef CONFIG_GPIOLIB struct gpio_chip gpio_chip; diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 661ed4d22007..e673f6ceb521 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -1090,6 +1090,19 @@ static bool sgtl5000_readable(struct device *dev, unsigned int reg) } } +/* + * This precalculated table contains all (vag_val * 100 / lo_calcntrl) results + * to select an appropriate lo_vol_* in SGTL5000_CHIP_LINE_OUT_VOL + * The calculatation was done for all possible register values which + * is the array index and the following formula: 10^((idx−15)/40) * 100 + */ +static const u8 vol_quot_table[] = { + 42, 45, 47, 50, 53, 56, 60, 63, + 67, 71, 75, 79, 84, 89, 94, 100, + 106, 112, 119, 126, 133, 141, 150, 158, + 168, 178, 188, 200, 211, 224, 237, 251 +}; + /* * sgtl5000 has 3 internal power supplies: * 1. VAG, normally set to vdda/2 @@ -1110,6 +1123,10 @@ static int sgtl5000_set_power_regs(struct snd_soc_codec *codec) u16 ana_pwr; u16 lreg_ctrl; int vag; + int lo_vag; + int vol_quot; + int lo_vol; + size_t i; struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); vdda = regulator_get_voltage(sgtl5000->supplies[VDDA].consumer); @@ -1197,23 +1214,45 @@ static int sgtl5000_set_power_regs(struct snd_soc_codec *codec) SGTL5000_ANA_GND_MASK, vag << SGTL5000_ANA_GND_SHIFT); /* set line out VAG to vddio / 2, in range (0.8v, 1.675v) */ - vag = vddio / 2; - if (vag <= SGTL5000_LINE_OUT_GND_BASE) - vag = 0; - else if (vag >= SGTL5000_LINE_OUT_GND_BASE + + lo_vag = vddio / 2; + if (lo_vag <= SGTL5000_LINE_OUT_GND_BASE) + lo_vag = 0; + else if (lo_vag >= SGTL5000_LINE_OUT_GND_BASE + SGTL5000_LINE_OUT_GND_STP * SGTL5000_LINE_OUT_GND_MAX) - vag = SGTL5000_LINE_OUT_GND_MAX; + lo_vag = SGTL5000_LINE_OUT_GND_MAX; else - vag = (vag - SGTL5000_LINE_OUT_GND_BASE) / + lo_vag = (lo_vag - SGTL5000_LINE_OUT_GND_BASE) / SGTL5000_LINE_OUT_GND_STP; snd_soc_update_bits(codec, SGTL5000_CHIP_LINE_OUT_CTRL, SGTL5000_LINE_OUT_CURRENT_MASK | SGTL5000_LINE_OUT_GND_MASK, - vag << SGTL5000_LINE_OUT_GND_SHIFT | + lo_vag << SGTL5000_LINE_OUT_GND_SHIFT | SGTL5000_LINE_OUT_CURRENT_360u << SGTL5000_LINE_OUT_CURRENT_SHIFT); + /* + * Set lineout output level in range (0..31) + * the same value is used for right and left channel + * + * Searching for a suitable index solving this formula: + * idx = 40 * log10(vag_val / lo_cagcntrl) + 15 + */ + vol_quot = (vag * 100) / lo_vag; + lo_vol = 0; + for (i = 0; i < ARRAY_SIZE(vol_quot_table); i++) { + if (vol_quot >= vol_quot_table[i]) + lo_vol = i; + else + break; + } + + snd_soc_update_bits(codec, SGTL5000_CHIP_LINE_OUT_VOL, + SGTL5000_LINE_OUT_VOL_RIGHT_MASK | + SGTL5000_LINE_OUT_VOL_LEFT_MASK, + lo_vol << SGTL5000_LINE_OUT_VOL_RIGHT_SHIFT | + lo_vol << SGTL5000_LINE_OUT_VOL_LEFT_SHIFT); + return 0; } diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig index 0632a36852c8..3744c9ed5370 100644 --- a/sound/soc/samsung/Kconfig +++ b/sound/soc/samsung/Kconfig @@ -174,7 +174,8 @@ config SND_SOC_SMDK_WM8994_PCM config SND_SOC_SPEYSIDE tristate "Audio support for Wolfson Speyside" - depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 && I2C && SPI_MASTER + depends on SND_SOC_SAMSUNG && I2C && SPI_MASTER + depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST select SND_SAMSUNG_I2S select SND_SOC_WM8996 select SND_SOC_WM9081 @@ -183,13 +184,15 @@ config SND_SOC_SPEYSIDE config SND_SOC_TOBERMORY tristate "Audio support for Wolfson Tobermory" - depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 && INPUT && I2C + depends on SND_SOC_SAMSUNG && INPUT && I2C + depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST select SND_SAMSUNG_I2S select SND_SOC_WM8962 config SND_SOC_BELLS tristate "Audio support for Wolfson Bells" - depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 && MFD_ARIZONA && I2C && SPI_MASTER + depends on SND_SOC_SAMSUNG && MFD_ARIZONA && I2C && SPI_MASTER + depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST select SND_SAMSUNG_I2S select SND_SOC_WM5102 select SND_SOC_WM5110 @@ -199,14 +202,16 @@ config SND_SOC_BELLS config SND_SOC_LOWLAND tristate "Audio support for Wolfson Lowland" - depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 && I2C + depends on SND_SOC_SAMSUNG && I2C + depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST select SND_SAMSUNG_I2S select SND_SOC_WM5100 select SND_SOC_WM9081 config SND_SOC_LITTLEMILL tristate "Audio support for Wolfson Littlemill" - depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 && I2C + depends on SND_SOC_SAMSUNG && I2C + depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST select SND_SAMSUNG_I2S select MFD_WM8994 select SND_SOC_WM8994 diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c index b92ab40d2be6..ea4ab374a223 100644 --- a/sound/soc/samsung/i2s.c +++ b/sound/soc/samsung/i2s.c @@ -1493,7 +1493,7 @@ static const struct samsung_i2s_dai_data samsung_dai_type_sec = { .dai_type = TYPE_SEC, }; -static struct platform_device_id samsung_i2s_driver_ids[] = { +static const struct platform_device_id samsung_i2s_driver_ids[] = { { .name = "samsung-i2s", .driver_data = (kernel_ulong_t)&i2sv3_dai_type, diff --git a/sound/soc/samsung/lowland.c b/sound/soc/samsung/lowland.c index 5f156093101e..0d0f58208b75 100644 --- a/sound/soc/samsung/lowland.c +++ b/sound/soc/samsung/lowland.c @@ -72,7 +72,7 @@ static int lowland_wm9081_init(struct snd_soc_pcm_runtime *rtd) { struct snd_soc_codec *codec = rtd->codec; - snd_soc_dapm_nc_pin(&codec->dapm, "LINEOUT"); + snd_soc_dapm_nc_pin(&rtd->card->dapm, "LINEOUT"); /* At any time the WM9081 is active it will have this clock */ return snd_soc_codec_set_sysclk(codec, WM9081_SYSCLK_MCLK, 0, diff --git a/sound/soc/samsung/smartq_wm8987.c b/sound/soc/samsung/smartq_wm8987.c index dfbe2db1c407..a0fe37fbed9f 100644 --- a/sound/soc/samsung/smartq_wm8987.c +++ b/sound/soc/samsung/smartq_wm8987.c @@ -137,8 +137,7 @@ static const struct snd_soc_dapm_route audio_map[] = { static int smartq_wm8987_init(struct snd_soc_pcm_runtime *rtd) { - struct snd_soc_codec *codec = rtd->codec; - struct snd_soc_dapm_context *dapm = &codec->dapm; + struct snd_soc_dapm_context *dapm = &rtd->card->dapm; int err = 0; /* set endpoints to not connected */ @@ -147,9 +146,6 @@ static int smartq_wm8987_init(struct snd_soc_pcm_runtime *rtd) snd_soc_dapm_nc_pin(dapm, "OUT3"); snd_soc_dapm_nc_pin(dapm, "ROUT1"); - /* set endpoints to default off mode */ - snd_soc_dapm_disable_pin(dapm, "Headphone Jack"); - /* Headphone jack detection */ err = snd_soc_card_jack_new(rtd->card, "Headphone Jack", SND_JACK_HEADPHONE, &smartq_jack, diff --git a/sound/soc/samsung/smdk_wm8994.c b/sound/soc/samsung/smdk_wm8994.c index d38595fbdab7..ff57b192d37d 100644 --- a/sound/soc/samsung/smdk_wm8994.c +++ b/sound/soc/samsung/smdk_wm8994.c @@ -86,8 +86,7 @@ static struct snd_soc_ops smdk_ops = { static int smdk_wm8994_init_paiftx(struct snd_soc_pcm_runtime *rtd) { - struct snd_soc_codec *codec = rtd->codec; - struct snd_soc_dapm_context *dapm = &codec->dapm; + struct snd_soc_dapm_context *dapm = &rtd->card->dapm; /* Other pins NC */ snd_soc_dapm_nc_pin(dapm, "HPOUT2P"); diff --git a/sound/soc/samsung/speyside.c b/sound/soc/samsung/speyside.c index 2dcb988bdff2..d1ae21c5e253 100644 --- a/sound/soc/samsung/speyside.c +++ b/sound/soc/samsung/speyside.c @@ -123,7 +123,7 @@ static void speyside_set_polarity(struct snd_soc_codec *codec, gpio_direction_output(WM8996_HPSEL_GPIO, speyside_jack_polarity); /* Re-run DAPM to make sure we're using the correct mic bias */ - snd_soc_dapm_sync(&codec->dapm); + snd_soc_dapm_sync(snd_soc_codec_get_dapm(codec)); } static int speyside_wm0010_init(struct snd_soc_pcm_runtime *rtd)