From 054d8ff37710efaebd1998ce94d366df315a354f Mon Sep 17 00:00:00 2001 From: Linas Vepstas Date: Thu, 27 Apr 2006 02:31:20 -0700 Subject: [PATCH 1/6] [PATCH] powerpc/pseries: avoid crash in PCI code if mem system not up The powerpc code is currently performing PCI setup before memory initialization. PCI setup touches PCI config space registers. If the PCI card is bad, this will evoke an error, which currrently can't be handled, as the PCI error recovery code expects kmalloc() to be functional. This patch will cause the system to punt instead of crashing with cpu 0x0: Vector: 300 (Data Access) at [c0000000004434d0] pc: c0000000000c06b4: .kmem_cache_alloc+0x8c/0xf4 lr: c00000000004ad6c: .eeh_send_failure_event+0x48/0xfc This patch will also print name of the offending pci device. Signed-off-by: Linas Vepstas Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/eeh_event.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c index a1bda6f96fd1..40020c65c89e 100644 --- a/arch/powerpc/platforms/pseries/eeh_event.c +++ b/arch/powerpc/platforms/pseries/eeh_event.c @@ -118,7 +118,15 @@ int eeh_send_failure_event (struct device_node *dn, { unsigned long flags; struct eeh_event *event; + char *location; + if (!mem_init_done) { + printk(KERN_ERR "EEH: event during early boot not handled\n"); + location = (char *) get_property(dn, "ibm,loc-code", NULL); + printk(KERN_ERR "EEH: device node = %s\n", dn->full_name); + printk(KERN_ERR "EEH: PCI location = %s\n", location); + return 1; + } event = kmalloc(sizeof(*event), GFP_ATOMIC); if (event == NULL) { printk (KERN_ERR "EEH: out of memory, event not handled\n"); From 0ccde0a290b44b8296b82a7683b4c299eb51ba6b Mon Sep 17 00:00:00 2001 From: Ananth N Mavinakayanahalli Date: Fri, 28 Apr 2006 17:38:42 +0530 Subject: [PATCH 2/6] [PATCH] powerpc/kprobes: fix singlestep out-of-line We currently single-step inline if the instruction on which a kprobe is inserted is a trap variant. - variants (such as tdnei, used by BUG()) typically evaluate a condition and cause a trap only if the condition is satisfied. - kprobes uses the unconditional "trap" (0x7fe00008) and single-stepping again on this instruction, resulting in another trap without evaluating the condition is obviously incorrect. Signed-off-by: Ananth N Mavinakayanahalli Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/kprobes.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c index 856ef1a832b9..f78866367b70 100644 --- a/arch/powerpc/kernel/kprobes.c +++ b/arch/powerpc/kernel/kprobes.c @@ -90,15 +90,15 @@ void __kprobes arch_remove_kprobe(struct kprobe *p) static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs) { - kprobe_opcode_t insn = *p->ainsn.insn; - regs->msr |= MSR_SE; - /* single step inline if it is a trap variant */ - if (is_trap(insn)) - regs->nip = (unsigned long)p->addr; - else - regs->nip = (unsigned long)p->ainsn.insn; + /* + * On powerpc we should single step on the original + * instruction even if the probed insn is a trap + * variant as values in regs could play a part in + * if the trap is taken or not + */ + regs->nip = (unsigned long)p->ainsn.insn; } static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb) From 61f5657c50341198ff05e375e6f1fc0476556562 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Sat, 29 Apr 2006 22:32:44 +0400 Subject: [PATCH 3/6] [PATCH] ppc32 CPM_UART: Fixed break send on SCC SCC uart sends a break sequence each time it is stopped with the CPM_CR_STOP_TX command. That means that each time an application closes the serial device, a break is transmitted. To fix this, graceful tx stop is issued for SCC. Signed-off-by: David Jander Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras --- drivers/serial/cpm_uart/cpm_uart_core.c | 6 +++++- include/asm-ppc/commproc.h | 1 + include/asm-ppc/cpm2.h | 2 +- 3 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index ced193bf9e1e..b9d1185df20c 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -457,7 +457,11 @@ static void cpm_uart_shutdown(struct uart_port *port) } /* Shut them really down and reinit buffer descriptors */ - cpm_line_cr_cmd(line, CPM_CR_STOP_TX); + if (IS_SMC(pinfo)) + cpm_line_cr_cmd(line, CPM_CR_STOP_TX); + else + cpm_line_cr_cmd(line, CPM_CR_GRA_STOP_TX); + cpm_uart_initbd(pinfo); } } diff --git a/include/asm-ppc/commproc.h b/include/asm-ppc/commproc.h index 973e60908234..31f362966a58 100644 --- a/include/asm-ppc/commproc.h +++ b/include/asm-ppc/commproc.h @@ -35,6 +35,7 @@ #define CPM_CR_INIT_TX ((ushort)0x0002) #define CPM_CR_HUNT_MODE ((ushort)0x0003) #define CPM_CR_STOP_TX ((ushort)0x0004) +#define CPM_CR_GRA_STOP_TX ((ushort)0x0005) #define CPM_CR_RESTART_TX ((ushort)0x0006) #define CPM_CR_CLOSE_RX_BD ((ushort)0x0007) #define CPM_CR_SET_GADDR ((ushort)0x0008) diff --git a/include/asm-ppc/cpm2.h b/include/asm-ppc/cpm2.h index b638b87cebe3..c70344b91049 100644 --- a/include/asm-ppc/cpm2.h +++ b/include/asm-ppc/cpm2.h @@ -69,7 +69,7 @@ #define CPM_CR_INIT_TX ((ushort)0x0002) #define CPM_CR_HUNT_MODE ((ushort)0x0003) #define CPM_CR_STOP_TX ((ushort)0x0004) -#define CPM_CR_GRA_STOP_TX ((ushort)0x0005) +#define CPM_CR_GRA_STOP_TX ((ushort)0x0005) #define CPM_CR_RESTART_TX ((ushort)0x0006) #define CPM_CR_SET_GADDR ((ushort)0x0008) #define CPM_CR_START_IDMA ((ushort)0x0009) From 6e1976961c9bd9a3dc368139fab1883961efc879 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Sat, 29 Apr 2006 23:06:00 +0400 Subject: [PATCH 4/6] [PATCH] ppc32 CPM_UART: fixes and improvements A number of small issues are fixed, and added the header file, missed from the original series. With this, driver should be pretty stable as tested among both platform-device-driven and "old way" boards. Also added missing GPL statement , and updated year field on existing ones to reflect code update. Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras --- arch/ppc/platforms/mpc866ads_setup.c | 2 +- drivers/serial/cpm_uart/cpm_uart.h | 19 +++++--- drivers/serial/cpm_uart/cpm_uart_core.c | 31 ++++++++++--- drivers/serial/cpm_uart/cpm_uart_cpm1.c | 2 + drivers/serial/cpm_uart/cpm_uart_cpm2.c | 2 + include/linux/fs_uart_pd.h | 60 +++++++++++++++++++++++++ 6 files changed, 104 insertions(+), 12 deletions(-) create mode 100644 include/linux/fs_uart_pd.h diff --git a/arch/ppc/platforms/mpc866ads_setup.c b/arch/ppc/platforms/mpc866ads_setup.c index 6ce3b842defe..d919dab61347 100644 --- a/arch/ppc/platforms/mpc866ads_setup.c +++ b/arch/ppc/platforms/mpc866ads_setup.c @@ -378,7 +378,7 @@ int __init mpc866ads_init(void) ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART); #endif -#ifdef CONFIG_SERIAL_CPM_SMCer +#ifdef CONFIG_SERIAL_CPM_SMC ppc_sys_device_enable(MPC8xx_CPM_SMC2); ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART); #endif diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h index aa5eb7ddeda9..3b35cb779539 100644 --- a/drivers/serial/cpm_uart/cpm_uart.h +++ b/drivers/serial/cpm_uart/cpm_uart.h @@ -5,6 +5,13 @@ * * Copyright (C) 2004 Freescale Semiconductor, Inc. * + * 2006 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * */ #ifndef CPM_UART_H #define CPM_UART_H @@ -101,12 +108,13 @@ static inline unsigned long cpu2cpm_addr(void* addr, struct uart_cpm_port *pinfo int offset; u32 val = (u32)addr; /* sane check */ - if ((val >= (u32)pinfo->mem_addr) && + if (likely((val >= (u32)pinfo->mem_addr)) && (val<((u32)pinfo->mem_addr + pinfo->mem_size))) { offset = val - (u32)pinfo->mem_addr; return pinfo->dma_addr+offset; } - printk("%s(): address %x to translate out of range!\n", __FUNCTION__, val); + /* something nasty happened */ + BUG(); return 0; } @@ -115,12 +123,13 @@ static inline void *cpm2cpu_addr(unsigned long addr, struct uart_cpm_port *pinfo int offset; u32 val = addr; /* sane check */ - if ((val >= pinfo->dma_addr) && - (val<(pinfo->dma_addr + pinfo->mem_size))) { + if (likely((val >= pinfo->dma_addr) && + (val<(pinfo->dma_addr + pinfo->mem_size)))) { offset = val - (u32)pinfo->dma_addr; return (void*)(pinfo->mem_addr+offset); } - printk("%s(): address %x to translate out of range!\n", __FUNCTION__, val); + /* something nasty happened */ + BUG(); return 0; } diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index b9d1185df20c..969f94900431 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -12,7 +12,8 @@ * * Copyright (C) 2004 Freescale Semiconductor, Inc. * (C) 2004 Intracom, S.A. - * (C) 2005 MontaVista Software, Inc. by Vitaly Bordug + * (C) 2005-2006 MontaVista Software, Inc. + * Vitaly Bordug * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -81,7 +82,7 @@ early_uart_get_pdev(int index) } -void cpm_uart_count(void) +static void cpm_uart_count(void) { cpm_uart_nr = 0; #ifdef CONFIG_SERIAL_CPM_SMC1 @@ -104,6 +105,21 @@ void cpm_uart_count(void) #endif } +/* Get UART number by its id */ +static int cpm_uart_id2nr(int id) +{ + int i; + if (id < UART_NR) { + for (i=0; ifs_no; line++); + line = cpm_uart_id2nr(idx); + if(line < 0) { + printk(KERN_ERR"%s(): port %d is not registered", __FUNCTION__, idx); + return -1; + } pinfo = (struct uart_cpm_port *) &cpm_uart_ports[idx]; @@ -1245,8 +1265,7 @@ static int cpm_uart_drv_probe(struct device *dev) } pdata = pdev->dev.platform_data; - pr_debug("cpm_uart_drv_probe: Adding CPM UART %d\n", - cpm_uart_port_map[pdata->fs_no]); + pr_debug("cpm_uart_drv_probe: Adding CPM UART %d\n", cpm_uart_id2nr(pdata->fs_no)); if ((ret = cpm_uart_drv_get_platform_data(pdev, 0))) return ret; @@ -1265,7 +1284,7 @@ static int cpm_uart_drv_remove(struct device *dev) struct fs_uart_platform_info *pdata = pdev->dev.platform_data; pr_debug("cpm_uart_drv_remove: Removing CPM UART %d\n", - cpm_uart_port_map[pdata->fs_no]); + cpm_uart_id2nr(pdata->fs_no)); uart_remove_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port); return 0; diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c index a5a30622637a..17406a05ce1f 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c @@ -8,6 +8,8 @@ * * Copyright (C) 2004 Freescale Semiconductor, Inc. * (C) 2004 Intracom, S.A. + * (C) 2006 MontaVista Software, Inc. + * Vitaly Bordug * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c index 7c6b07aeea92..4b2de08f46d0 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c @@ -8,6 +8,8 @@ * * Copyright (C) 2004 Freescale Semiconductor, Inc. * (C) 2004 Intracom, S.A. + * (C) 2006 MontaVista Software, Inc. + * Vitaly Bordug * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/include/linux/fs_uart_pd.h b/include/linux/fs_uart_pd.h new file mode 100644 index 000000000000..f5975126b712 --- /dev/null +++ b/include/linux/fs_uart_pd.h @@ -0,0 +1,60 @@ +/* + * Platform information definitions for the CPM Uart driver. + * + * 2006 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef FS_UART_PD_H +#define FS_UART_PD_H + +#include +#include + +enum fs_uart_id { + fsid_smc1_uart, + fsid_smc2_uart, + fsid_scc1_uart, + fsid_scc2_uart, + fsid_scc3_uart, + fsid_scc4_uart, + fs_uart_nr, +}; + +static inline int fs_uart_id_scc2fsid(int id) +{ + return fsid_scc1_uart + id - 1; +} + +static inline int fs_uart_id_fsid2scc(int id) +{ + return id - fsid_scc1_uart + 1; +} + +static inline int fs_uart_id_smc2fsid(int id) +{ + return fsid_smc1_uart + id - 1; +} + +static inline int fs_uart_id_fsid2smc(int id) +{ + return id - fsid_smc1_uart + 1; +} + +struct fs_uart_platform_info { + void(*init_ioports)(void); + /* device specific information */ + int fs_no; /* controller index */ + u32 uart_clk; + u8 tx_num_fifo; + u8 tx_buf_size; + u8 rx_num_fifo; + u8 rx_buf_size; + u8 brg; +}; + +#endif From 6bfd93c32a5065d0e858780b3beb0b667081601c Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 3 May 2006 23:02:04 +1000 Subject: [PATCH 5/6] powerpc: Fix incorrect might_sleep in __get_user/__put_user on kernel addresses We have a case where __get_user and __put_user can validly be used on kernel addresses in interrupt context - namely, the alignment exception handler, as our get/put_unaligned just do a single access and rely on the alignment exception handler to fix things up in the rare cases where the cpu can't handle it in hardware. Thus we can get alignment exceptions in the network stack at interrupt level. The alignment exception handler does a __get_user to read the instruction and blows up in might_sleep(). Since a __get_user on a kernel address won't actually ever sleep, this makes the might_sleep conditional on the address being less than PAGE_OFFSET. Signed-off-by: Paul Mackerras --- include/asm-powerpc/uaccess.h | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/include/asm-powerpc/uaccess.h b/include/asm-powerpc/uaccess.h index 3872e924cdd6..d83fc29c2bbf 100644 --- a/include/asm-powerpc/uaccess.h +++ b/include/asm-powerpc/uaccess.h @@ -7,6 +7,7 @@ #include #include #include +#include #define VERIFY_READ 0 #define VERIFY_WRITE 1 @@ -179,9 +180,11 @@ do { \ #define __put_user_nocheck(x, ptr, size) \ ({ \ long __pu_err; \ - might_sleep(); \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + if (!is_kernel_addr((unsigned long)__pu_addr)) \ + might_sleep(); \ __chk_user_ptr(ptr); \ - __put_user_size((x), (ptr), (size), __pu_err); \ + __put_user_size((x), __pu_addr, (size), __pu_err); \ __pu_err; \ }) @@ -258,9 +261,11 @@ do { \ ({ \ long __gu_err; \ unsigned long __gu_val; \ + const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ __chk_user_ptr(ptr); \ - might_sleep(); \ - __get_user_size(__gu_val, (ptr), (size), __gu_err); \ + if (!is_kernel_addr((unsigned long)__gu_addr)) \ + might_sleep(); \ + __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ (x) = (__typeof__(*(ptr)))__gu_val; \ __gu_err; \ }) @@ -270,9 +275,11 @@ do { \ ({ \ long __gu_err; \ long long __gu_val; \ + const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ __chk_user_ptr(ptr); \ - might_sleep(); \ - __get_user_size(__gu_val, (ptr), (size), __gu_err); \ + if (!is_kernel_addr((unsigned long)__gu_addr)) \ + might_sleep(); \ + __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ (x) = (__typeof__(*(ptr)))__gu_val; \ __gu_err; \ }) From d205819e2346d20fee41297ea6cf789c591abccf Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 3 May 2006 23:04:37 +1000 Subject: [PATCH 6/6] [PATCH] powerpc: Use the ibm,pa-features property if available Forthcoming IBM machines will have a "ibm,pa-features" property on CPU nodes, that contains bits indicating which optional architecture features are implemented by the CPU. This adds code to use the property, if present, to update our CPU feature bitmaps. Note that this means we can both set and clear feature bits based on what the firmware tells us. This is based on a patch by Will Schmidt . Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom.c | 70 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 70 insertions(+) diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 1cb69e8fb0b1..9a07f97f0712 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -885,6 +885,74 @@ void __init unflatten_device_tree(void) DBG(" <- unflatten_device_tree()\n"); } +/* + * ibm,pa-features is a per-cpu property that contains a string of + * attribute descriptors, each of which has a 2 byte header plus up + * to 254 bytes worth of processor attribute bits. First header + * byte specifies the number of bytes following the header. + * Second header byte is an "attribute-specifier" type, of which + * zero is the only currently-defined value. + * Implementation: Pass in the byte and bit offset for the feature + * that we are interested in. The function will return -1 if the + * pa-features property is missing, or a 1/0 to indicate if the feature + * is supported/not supported. Note that the bit numbers are + * big-endian to match the definition in PAPR. + */ +static struct ibm_pa_feature { + unsigned long cpu_features; /* CPU_FTR_xxx bit */ + unsigned int cpu_user_ftrs; /* PPC_FEATURE_xxx bit */ + unsigned char pabyte; /* byte number in ibm,pa-features */ + unsigned char pabit; /* bit number (big-endian) */ + unsigned char invert; /* if 1, pa bit set => clear feature */ +} ibm_pa_features[] __initdata = { + {0, PPC_FEATURE_HAS_MMU, 0, 0, 0}, + {0, PPC_FEATURE_HAS_FPU, 0, 1, 0}, + {CPU_FTR_SLB, 0, 0, 2, 0}, + {CPU_FTR_CTRL, 0, 0, 3, 0}, + {CPU_FTR_NOEXECUTE, 0, 0, 6, 0}, + {CPU_FTR_NODSISRALIGN, 0, 1, 1, 1}, + {CPU_FTR_CI_LARGE_PAGE, 0, 1, 2, 0}, +}; + +static void __init check_cpu_pa_features(unsigned long node) +{ + unsigned char *pa_ftrs; + unsigned long len, tablelen, i, bit; + + pa_ftrs = of_get_flat_dt_prop(node, "ibm,pa-features", &tablelen); + if (pa_ftrs == NULL) + return; + + /* find descriptor with type == 0 */ + for (;;) { + if (tablelen < 3) + return; + len = 2 + pa_ftrs[0]; + if (tablelen < len) + return; /* descriptor 0 not found */ + if (pa_ftrs[1] == 0) + break; + tablelen -= len; + pa_ftrs += len; + } + + /* loop over bits we know about */ + for (i = 0; i < ARRAY_SIZE(ibm_pa_features); ++i) { + struct ibm_pa_feature *fp = &ibm_pa_features[i]; + + if (fp->pabyte >= pa_ftrs[0]) + continue; + bit = (pa_ftrs[2 + fp->pabyte] >> (7 - fp->pabit)) & 1; + if (bit ^ fp->invert) { + cur_cpu_spec->cpu_features |= fp->cpu_features; + cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs; + } else { + cur_cpu_spec->cpu_features &= ~fp->cpu_features; + cur_cpu_spec->cpu_user_features &= ~fp->cpu_user_ftrs; + } + } +} + static int __init early_init_dt_scan_cpus(unsigned long node, const char *uname, int depth, void *data) @@ -969,6 +1037,8 @@ static int __init early_init_dt_scan_cpus(unsigned long node, } #endif /* CONFIG_ALTIVEC */ + check_cpu_pa_features(node); + #ifdef CONFIG_PPC_PSERIES if (nthreads > 1) cur_cpu_spec->cpu_features |= CPU_FTR_SMT;