kpriv/linux-hardened
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

MN10300: Clear ASB2364 peripheral interrupt masks before enabling interrupts

Browse source 
Clear the interrupt mask registers of ASB2364 peripherals before enabling
interrupts so that any peripherals that weren't dealt with by the bootloader
after a reboot (if there was one) won't cause an interrupt storm when
interrupts are first enabled before the drivers are initialised.

Also, attempt to reset the peripherals attached to the FPGA.

Signed-off-by: David Howells <dhowells@redhat.com>
This commit is contained in:
David Howells 2011-03-18 16:52:54 +00:00
parent 02b2944cd7
commit ddb7d1e975
2 changed files with 55 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

11
arch/mn10300/unit-asb2364/irq-fpga.c
View file

@ -88,6 +88,17 @@ void __init irq_fpga_init(void)
{
int irq;
ASB2364_FPGA_REG_MASK_LAN = 0x0001;
SyncExBus();
ASB2364_FPGA_REG_MASK_UART = 0x0001;
SyncExBus();
ASB2364_FPGA_REG_MASK_I2C = 0x0001;
SyncExBus();
ASB2364_FPGA_REG_MASK_USB = 0x0001;
SyncExBus();
ASB2364_FPGA_REG_MASK_FPGA = 0x0001;
SyncExBus();
for (irq = NR_CPU_IRQS; irq < NR_IRQS; irq++)
set_irq_chip_and_handler(irq, &asb2364_fpga_pic, handle_level_irq);

44
arch/mn10300/unit-asb2364/unit-init.c
View file

@ -20,13 +20,41 @@
#include <asm/processor.h>
#include <asm/irq.h>
#include <asm/intctl-regs.h>
#include <asm/serial-regs.h>
#include <unit/fpga-regs.h>
#include <unit/serial.h>
#include <unit/smsc911x.h>
#define TTYS0_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 2, u8)
#define LAN_IRQ_CFG __SYSREG(SMSC911X_BASE + 0x54, u32)
#define LAN_INT_EN __SYSREG(SMSC911X_BASE + 0x5c, u32)
/*
* initialise some of the unit hardware before gdbstub is set up
*/
asmlinkage void __init unit_init(void)
{
/* Make sure we aren't going to get unexpected interrupts */
TTYS0_SERIAL_IER = 0;
SC0RXICR = 0;
SC0TXICR = 0;
SC1RXICR = 0;
SC1TXICR = 0;
SC2RXICR = 0;
SC2TXICR = 0;
/* Attempt to reset the FPGA attached peripherals */
ASB2364_FPGA_REG_RESET_LAN = 0x0000;
SyncExBus();
ASB2364_FPGA_REG_RESET_UART = 0x0000;
SyncExBus();
ASB2364_FPGA_REG_RESET_I2C = 0x0000;
SyncExBus();
ASB2364_FPGA_REG_RESET_USB = 0x0000;
SyncExBus();
ASB2364_FPGA_REG_RESET_AV = 0x0000;
SyncExBus();
/* set up the external interrupts */
/* XIRQ[0]: NAND RXBY */
@ -56,7 +84,23 @@ asmlinkage void __init unit_init(void)
*/
asmlinkage void __init unit_setup(void)
{
/* Release the reset on the SMSC911X so that it is ready by the time we
* need it */
ASB2364_FPGA_REG_RESET_LAN = 0x0001;
SyncExBus();
ASB2364_FPGA_REG_RESET_UART = 0x0001;
SyncExBus();
ASB2364_FPGA_REG_RESET_I2C = 0x0001;
SyncExBus();
ASB2364_FPGA_REG_RESET_USB = 0x0001;
SyncExBus();
ASB2364_FPGA_REG_RESET_AV = 0x0001;
SyncExBus();
/* Make sure the ethernet chipset isn't going to give us an interrupt
* storm from stuff it was doing pre-reset */
LAN_IRQ_CFG = 0;
LAN_INT_EN = 0;
}
/*