diff --git a/Documentation/input/xpad.txt b/Documentation/input/xpad.txt index b9111a703ce0..5427bdf225ed 100644 --- a/Documentation/input/xpad.txt +++ b/Documentation/input/xpad.txt @@ -3,20 +3,37 @@ xpad - Linux USB driver for X-Box gamepads This is the very first release of a driver for X-Box gamepads. Basically, this was hacked away in just a few hours, so don't expect miracles. + In particular, there is currently NO support for the rumble pack. You won't find many ff-aware linux applications anyway. -0. Status ---------- +0. Notes +-------- -For now, this driver has only been tested on just one Linux-Box. -This one is running a 2.4.18 kernel with usb-uhci on an amd athlon 600. +Driver updated for kernel 2.6.17.11. (Based on a patch for 2.6.11.4.) -The jstest-program from joystick-1.2.15 (jstest-version 2.1.0) reports -8 axes and 10 buttons. +The number of buttons/axes reported varies based on 3 things: +- if you are using a known controller +- if you are using a known dance pad +- if using an unknown device (one not listed below), what you set in the + module configuration for "Map D-PAD to buttons rather than axes for unknown + pads" (module option dpad_to_buttons) -Alls 8 axes work, though they all have the same range (-32768..32767) +If you set dpad_to_buttons to 0 and you are using an unknown device (one +not listed below), the driver will map the directional pad to axes (X/Y), +if you said N it will map the d-pad to buttons, which is needed for dance +style games to function correctly. The default is Y. + +dpad_to_buttons has no effect for known pads. + +0.1 Normal Controllers +---------------------- +With a normal controller, the directional pad is mapped to its own X/Y axes. +The jstest-program from joystick-1.2.15 (jstest-version 2.1.0) will report 8 +axes and 10 buttons. + +All 8 axes work, though they all have the same range (-32768..32767) and the zero-setting is not correct for the triggers (I don't know if that is some limitation of jstest, since the input device setup should be fine. I didn't have a look at jstest itself yet). @@ -30,16 +47,50 @@ in game functionality were OK. However, I find it rather difficult to play first person shooters with a pad. Your mileage may vary. +0.2 Xbox Dance Pads +------------------- +When using a known dance pad, jstest will report 6 axes and 14 buttons. + +For dance style pads (like the redoctane pad) several changes +have been made. The old driver would map the d-pad to axes, resulting +in the driver being unable to report when the user was pressing both +left+right or up+down, making DDR style games unplayable. + +Known dance pads automatically map the d-pad to buttons and will work +correctly out of the box. + +If your dance pad is recognized by the driver but is using axes instead +of buttons, see section 0.3 - Unknown Controllers + +I've tested this with Stepmania, and it works quite well. + + +0.3 Unkown Controllers +---------------------- +If you have an unkown xbox controller, it should work just fine with +the default settings. + +HOWEVER if you have an unknown dance pad not listed below, it will not +work UNLESS you set "dpad_to_buttons" to 1 in the module configuration. + +PLEASE if you have an unkown controller, email Dom with +a dump from /proc/bus/usb and a description of the pad (manufacturer, country, +whether it is a dance pad or normal controller) so that we can add your pad +to the list of supported devices, ensuring that it will work out of the +box in the future. + + 1. USB adapter -------------- Before you can actually use the driver, you need to get yourself an -adapter cable to connect the X-Box controller to your Linux-Box. +adapter cable to connect the X-Box controller to your Linux-Box. You +can buy these online fairly cheap, or build your own. -Such a cable is pretty easy to build. The Controller itself is a USB compound -device (a hub with three ports for two expansion slots and the controller -device) with the only difference in a nonstandard connector (5 pins vs. 4 on -standard USB connector). +Such a cable is pretty easy to build. The Controller itself is a USB +compound device (a hub with three ports for two expansion slots and +the controller device) with the only difference in a nonstandard connector +(5 pins vs. 4 on standard USB connector). You just need to solder a USB connector onto the cable and keep the yellow wire unconnected. The other pins have the same order on both @@ -51,36 +102,36 @@ original one. You can buy an extension cable and cut that instead. That way, you can still use the controller with your X-Box, if you have one ;) -2. driver installation +2. Driver Installation ---------------------- Once you have the adapter cable and the controller is connected, you need to load your USB subsystem and should cat /proc/bus/usb/devices. There should be an entry like the one at the end [4]. -Currently (as of version 0.0.4), the following three devices are included: +Currently (as of version 0.0.6), the following devices are included: original Microsoft XBOX controller (US), vendor=0x045e, product=0x0202 + smaller Microsoft XBOX controller (US), vendor=0x045e, product=0x0289 original Microsoft XBOX controller (Japan), vendor=0x045e, product=0x0285 InterAct PowerPad Pro (Germany), vendor=0x05fd, product=0x107a + RedOctane Xbox Dance Pad (US), vendor=0x0c12, product=0x8809 -If you have another controller that is not listed above and is not recognized -by the driver, please drop me a line with the appropriate info (that is, include -the name, vendor and product ID, as well as the country where you bought it; -sending the whole dump out of /proc/bus/usb/devices along would be even better). +The driver should work with xbox pads not listed above as well, however +you will need to do something extra for dance pads to work. -In theory, the driver should work with other controllers than mine -(InterAct PowerPad pro, bought in Germany) just fine, but I cannot test this -for I only have this one controller. +If you have a controller not listed above, see 0.3 - Unknown Controllers If you compiled and installed the driver, test the functionality: > modprobe xpad > modprobe joydev > jstest /dev/js0 -There should be a single line showing 18 inputs (8 axes, 10 buttons), and -it's values should change if you move the sticks and push the buttons. +If you're using a normal controller, there should be a single line showing +18 inputs (8 axes, 10 buttons), and its values should change if you move +the sticks and push the buttons. If you're using a dance pad, it should +show 20 inputs (6 axes, 14 buttons). -It works? Voila, your done ;) +It works? Voila, you're done ;) 3. Thanks @@ -111,6 +162,22 @@ I: If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 32 Ivl= 10ms E: Ad=02(O) Atr=03(Int.) MxPS= 32 Ivl= 10ms +5. /proc/bus/usb/devices - dump from Redoctane Xbox Dance Pad (US): + +T: Bus=01 Lev=02 Prnt=09 Port=00 Cnt=01 Dev#= 10 Spd=12 MxCh= 0 +D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 +P: Vendor=0c12 ProdID=8809 Rev= 0.01 +S: Product=XBOX DDR +C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA +I: If#= 0 Alt= 0 #EPs= 2 Cls=58(unk. ) Sub=42 Prot=00 Driver=xpad +E: Ad=82(I) Atr=03(Int.) MxPS= 32 Ivl=4ms +E: Ad=02(O) Atr=03(Int.) MxPS= 32 Ivl=4ms + -- Marko Friedemann 2002-07-16 + - original doc + +Dominic Cerquetti +2005-03-19 + - added stuff for dance pads, new d-pad->axes mappings diff --git a/drivers/usb/input/xpad.c b/drivers/usb/input/xpad.c index cebb6c463bfb..6a12a943b938 100644 --- a/drivers/usb/input/xpad.c +++ b/drivers/usb/input/xpad.c @@ -1,8 +1,9 @@ /* - * X-Box gamepad - v0.0.5 + * X-Box gamepad - v0.0.6 * * Copyright (c) 2002 Marko Friedemann - * + * 2005 Dominic Cerquetti + * 2006 Adam Buchbinder * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -30,9 +31,10 @@ * - Greg Kroah-Hartman - usb-skeleton driver * * TODO: - * - fine tune axes + * - fine tune axes (especially trigger axes) * - fix "analog" buttons (reported as digital now) * - get rumble working + * - need USB IDs for other dance pads * * History: * @@ -57,25 +59,40 @@ #include #include #include +#include #include +#include #include #include -#define DRIVER_VERSION "v0.0.5" +#define DRIVER_VERSION "v0.0.6" #define DRIVER_AUTHOR "Marko Friedemann " #define DRIVER_DESC "X-Box pad driver" #define XPAD_PKT_LEN 32 +/* xbox d-pads should map to buttons, as is required for DDR pads + but we map them to axes when possible to simplify things */ +#define MAP_DPAD_TO_BUTTONS 0 +#define MAP_DPAD_TO_AXES 1 +#define MAP_DPAD_UNKNOWN -1 + +static int dpad_to_buttons; +module_param(dpad_to_buttons, bool, S_IRUGO); +MODULE_PARM_DESC(dpad_to_buttons, "Map D-PAD to buttons rather than axes for unknown pads"); + static const struct xpad_device { u16 idVendor; u16 idProduct; char *name; + u8 dpad_mapping; } xpad_device[] = { - { 0x045e, 0x0202, "Microsoft X-Box pad (US)" }, - { 0x045e, 0x0285, "Microsoft X-Box pad (Japan)" }, - { 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)" }, - { 0x0000, 0x0000, "X-Box pad" } + { 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", MAP_DPAD_TO_AXES }, + { 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", MAP_DPAD_TO_AXES }, + { 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", MAP_DPAD_TO_AXES }, + { 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", MAP_DPAD_TO_AXES }, + { 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", MAP_DPAD_TO_BUTTONS }, + { 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN } }; static const signed short xpad_btn[] = { @@ -84,11 +101,23 @@ static const signed short xpad_btn[] = { -1 /* terminating entry */ }; +/* only used if MAP_DPAD_TO_BUTTONS */ +static const signed short xpad_btn_pad[] = { + BTN_LEFT, BTN_RIGHT, /* d-pad left, right */ + BTN_0, BTN_1, /* d-pad up, down (XXX names??) */ + -1 /* terminating entry */ +}; + static const signed short xpad_abs[] = { ABS_X, ABS_Y, /* left stick */ ABS_RX, ABS_RY, /* right stick */ ABS_Z, ABS_RZ, /* triggers left/right */ - ABS_HAT0X, ABS_HAT0Y, /* digital pad */ + -1 /* terminating entry */ +}; + +/* only used if MAP_DPAD_TO_AXES */ +static const signed short xpad_abs_pad[] = { + ABS_HAT0X, ABS_HAT0Y, /* d-pad axes */ -1 /* terminating entry */ }; @@ -100,14 +129,16 @@ static struct usb_device_id xpad_table [] = { MODULE_DEVICE_TABLE (usb, xpad_table); struct usb_xpad { - struct input_dev *dev; /* input device interface */ - struct usb_device *udev; /* usb device */ + struct input_dev *dev; /* input device interface */ + struct usb_device *udev; /* usb device */ - struct urb *irq_in; /* urb for interrupt in report */ - unsigned char *idata; /* input data */ + struct urb *irq_in; /* urb for interrupt in report */ + unsigned char *idata; /* input data */ dma_addr_t idata_dma; - char phys[65]; /* physical device path */ + char phys[65]; /* physical device path */ + + int dpad_mapping; /* map d-pad to buttons or to axes */ }; /* @@ -137,14 +168,21 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d input_report_abs(dev, ABS_RZ, data[11]); /* digital pad */ - input_report_abs(dev, ABS_HAT0X, !!(data[2] & 0x08) - !!(data[2] & 0x04)); - input_report_abs(dev, ABS_HAT0Y, !!(data[2] & 0x02) - !!(data[2] & 0x01)); + if (xpad->dpad_mapping == MAP_DPAD_TO_AXES) { + input_report_abs(dev, ABS_HAT0X, !!(data[2] & 0x08) - !!(data[2] & 0x04)); + input_report_abs(dev, ABS_HAT0Y, !!(data[2] & 0x02) - !!(data[2] & 0x01)); + } else /* xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS */ { + input_report_key(dev, BTN_LEFT, data[2] & 0x04); + input_report_key(dev, BTN_RIGHT, data[2] & 0x08); + input_report_key(dev, BTN_0, data[2] & 0x01); // up + input_report_key(dev, BTN_1, data[2] & 0x02); // down + } /* start/back buttons and stick press left/right */ - input_report_key(dev, BTN_START, (data[2] & 0x10) >> 4); - input_report_key(dev, BTN_BACK, (data[2] & 0x20) >> 5); - input_report_key(dev, BTN_THUMBL, (data[2] & 0x40) >> 6); - input_report_key(dev, BTN_THUMBR, data[2] >> 7); + input_report_key(dev, BTN_START, data[2] & 0x10); + input_report_key(dev, BTN_BACK, data[2] & 0x20); + input_report_key(dev, BTN_THUMBL, data[2] & 0x40); + input_report_key(dev, BTN_THUMBR, data[2] & 0x80); /* "analog" buttons A, B, X, Y */ input_report_key(dev, BTN_A, data[4]); @@ -206,6 +244,28 @@ static void xpad_close (struct input_dev *dev) usb_kill_urb(xpad->irq_in); } +static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs) +{ + set_bit(abs, input_dev->absbit); + + switch (abs) { + case ABS_X: + case ABS_Y: + case ABS_RX: + case ABS_RY: /* the two sticks */ + input_set_abs_params(input_dev, abs, -32768, 32767, 16, 128); + break; + case ABS_Z: + case ABS_RZ: /* the triggers */ + input_set_abs_params(input_dev, abs, 0, 255, 0, 0); + break; + case ABS_HAT0X: + case ABS_HAT0Y: /* the d-pad (only if MAP_DPAD_TO_AXES) */ + input_set_abs_params(input_dev, abs, -1, 1, 0, 0); + break; + } +} + static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *udev = interface_to_usbdev (intf); @@ -235,6 +295,9 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id goto fail2; xpad->udev = udev; + xpad->dpad_mapping = xpad_device[i].dpad_mapping; + if (xpad->dpad_mapping == MAP_DPAD_UNKNOWN) + xpad->dpad_mapping = dpad_to_buttons; xpad->dev = input_dev; usb_make_path(udev, xpad->phys, sizeof(xpad->phys)); strlcat(xpad->phys, "/input0", sizeof(xpad->phys)); @@ -249,32 +312,19 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + /* set up buttons */ for (i = 0; xpad_btn[i] >= 0; i++) set_bit(xpad_btn[i], input_dev->keybit); + if (xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS) + for (i = 0; xpad_btn_pad[i] >= 0; i++) + set_bit(xpad_btn_pad[i], input_dev->keybit); - for (i = 0; xpad_abs[i] >= 0; i++) { - - signed short t = xpad_abs[i]; - - set_bit(t, input_dev->absbit); - - switch (t) { - case ABS_X: - case ABS_Y: - case ABS_RX: - case ABS_RY: /* the two sticks */ - input_set_abs_params(input_dev, t, -32768, 32767, 16, 128); - break; - case ABS_Z: - case ABS_RZ: /* the triggers */ - input_set_abs_params(input_dev, t, 0, 255, 0, 0); - break; - case ABS_HAT0X: - case ABS_HAT0Y: /* the d-pad */ - input_set_abs_params(input_dev, t, -1, 1, 0, 0); - break; - } - } + /* set up axes */ + for (i = 0; xpad_abs[i] >= 0; i++) + xpad_set_up_abs(input_dev, xpad_abs[i]); + if (xpad->dpad_mapping == MAP_DPAD_TO_AXES) + for (i = 0; xpad_abs_pad[i] >= 0; i++) + xpad_set_up_abs(input_dev, xpad_abs_pad[i]); ep_irq_in = &intf->cur_altsetting->endpoint[0].desc; usb_fill_int_urb(xpad->irq_in, udev, @@ -305,7 +355,8 @@ static void xpad_disconnect(struct usb_interface *intf) usb_kill_urb(xpad->irq_in); input_unregister_device(xpad->dev); usb_free_urb(xpad->irq_in); - usb_buffer_free(interface_to_usbdev(intf), XPAD_PKT_LEN, xpad->idata, xpad->idata_dma); + usb_buffer_free(interface_to_usbdev(intf), XPAD_PKT_LEN, + xpad->idata, xpad->idata_dma); kfree(xpad); } }