Merge branch 'devfreq-for-next' of git://git.infradead.org/users/kmpark/linux-samsung into pm-devfreq

* 'devfreq-for-next' of git://git.infradead.org/users/kmpark/linux-samsung: (765 commits)
  PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412.
  pci: Fix hotplug of Express Module with pci bridges
  i2c-eg20t: correct the driver init order of pch_i2c_probe()
  I2C: OMAP: fix FIFO usage for OMAP4
  i2c-s3c2410: Fix return code of s3c24xx_i2c_parse_dt_gpio
  i2c: i2c-s3c2410: Add a cpu_relax() to busy wait for bus idle
  Linux 3.2-rc6
  Revert "drm/i915: fix infinite recursion on unbind due to ilk vt-d w/a"
  btrfs: lower the dirty balance poll interval
  drm/i915/dp: Dither down to 6bpc if it makes the mode fit
  drm/i915: enable semaphores on per-device defaults
  drm/i915: don't set unpin_work if vblank_get fails
  drm/i915: By default, enable RC6 on IVB and SNB when reasonable
  iommu: Export intel_iommu_enabled to signal when iommu is in use
  drm/i915/sdvo: Include LVDS panels for the IS_DIGITAL check
  drm/i915: prevent division by zero when asking for chipset power
  drm/i915: add PCH info to i915_capabilities
  drm/i915: set the right SDVO transcoder for CPT
  drm/i915: no-lvds quirk for ASUS AT5NM10T-I
  sched: Fix select_idle_sibling() regression in selecting an idle SMT sibling
  ...
This commit is contained in:
Rafael J. Wysocki 2011-12-21 09:51:23 +01:00
commit dfa9d178cd
779 changed files with 11377 additions and 6024 deletions

View file

@ -688,10 +688,13 @@ S: Oxfordshire, UK.
N: Kees Cook
E: kees@outflux.net
W: http://outflux.net/
P: 1024D/17063E6D 9FA3 C49C 23C9 D1BC 2E30 1975 1FFF 4BA9 1706 3E6D
D: Minor updates to SCSI types, added /proc/pid/maps protection
E: kees@ubuntu.com
E: keescook@chromium.org
W: http://outflux.net/blog/
P: 4096R/DC6DC026 A5C3 F68F 229D D60F 723E 6E13 8972 F4DF DC6D C026
D: Various security things, bug fixes, and documentation.
S: (ask for current address)
S: Portland, Oregon
S: USA
N: Robin Cornelius

View file

@ -57,13 +57,6 @@ create_snap
$ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_create
rollback_snap
Rolls back data to the specified snapshot. This goes over the entire
list of rados blocks and sends a rollback command to each.
$ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_rollback
snap_*
A directory per each snapshot

View file

@ -33,6 +33,7 @@ qcom Qualcomm, Inc.
ramtron Ramtron International
samsung Samsung Semiconductor
schindler Schindler
sil Silicon Image
simtek
sirf SiRF Technology, Inc.
stericsson ST-Ericsson

View file

@ -63,8 +63,8 @@ IRC network.
Userspace tools for creating and manipulating Btrfs file systems are
available from the git repository at the following location:
http://git.kernel.org/?p=linux/kernel/git/mason/btrfs-progs-unstable.git
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-progs-unstable.git
http://git.kernel.org/?p=linux/kernel/git/mason/btrfs-progs.git
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-progs.git
These include the following tools:

View file

@ -315,12 +315,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
CPU-intensive style benchmark, and it can vary highly in
a microbenchmark depending on workload and compiler.
1: only for 32-bit processes
2: only for 64-bit processes
32: only for 32-bit processes
64: only for 64-bit processes
on: enable for both 32- and 64-bit processes
off: disable for both 32- and 64-bit processes
amd_iommu= [HW,X86-84]
amd_iommu= [HW,X86-64]
Pass parameters to the AMD IOMMU driver in the system.
Possible values are:
fullflush - enable flushing of IO/TLB entries when

View file

@ -282,11 +282,11 @@ tcp_max_ssthresh - INTEGER
Default: 0 (off)
tcp_max_syn_backlog - INTEGER
Maximal number of remembered connection requests, which are
still did not receive an acknowledgment from connecting client.
Default value is 1024 for systems with more than 128Mb of memory,
and 128 for low memory machines. If server suffers of overload,
try to increase this number.
Maximal number of remembered connection requests, which have not
received an acknowledgment from connecting client.
The minimal value is 128 for low memory machines, and it will
increase in proportion to the memory of machine.
If server suffers from overload, try increasing this number.
tcp_max_tw_buckets - INTEGER
Maximal number of timewait sockets held by system simultaneously.

View file

@ -123,9 +123,10 @@ please refer directly to the source code for more information about it.
Subsystem-Level Methods
-----------------------
The core methods to suspend and resume devices reside in struct dev_pm_ops
pointed to by the pm member of struct bus_type, struct device_type and
struct class. They are mostly of interest to the people writing infrastructure
for buses, like PCI or USB, or device type and device class drivers.
pointed to by the ops member of struct dev_pm_domain, or by the pm member of
struct bus_type, struct device_type and struct class. They are mostly of
interest to the people writing infrastructure for platforms and buses, like PCI
or USB, or device type and device class drivers.
Bus drivers implement these methods as appropriate for the hardware and the
drivers using it; PCI works differently from USB, and so on. Not many people
@ -139,41 +140,57 @@ sequencing in the driver model tree.
/sys/devices/.../power/wakeup files
-----------------------------------
All devices in the driver model have two flags to control handling of wakeup
events (hardware signals that can force the device and/or system out of a low
power state). These flags are initialized by bus or device driver code using
All device objects in the driver model contain fields that control the handling
of system wakeup events (hardware signals that can force the system out of a
sleep state). These fields are initialized by bus or device driver code using
device_set_wakeup_capable() and device_set_wakeup_enable(), defined in
include/linux/pm_wakeup.h.
The "can_wakeup" flag just records whether the device (and its driver) can
The "power.can_wakeup" flag just records whether the device (and its driver) can
physically support wakeup events. The device_set_wakeup_capable() routine
affects this flag. The "should_wakeup" flag controls whether the device should
try to use its wakeup mechanism. device_set_wakeup_enable() affects this flag;
for the most part drivers should not change its value. The initial value of
should_wakeup is supposed to be false for the majority of devices; the major
exceptions are power buttons, keyboards, and Ethernet adapters whose WoL
(wake-on-LAN) feature has been set up with ethtool. It should also default
to true for devices that don't generate wakeup requests on their own but merely
forward wakeup requests from one bus to another (like PCI bridges).
affects this flag. The "power.wakeup" field is a pointer to an object of type
struct wakeup_source used for controlling whether or not the device should use
its system wakeup mechanism and for notifying the PM core of system wakeup
events signaled by the device. This object is only present for wakeup-capable
devices (i.e. devices whose "can_wakeup" flags are set) and is created (or
removed) by device_set_wakeup_capable().
Whether or not a device is capable of issuing wakeup events is a hardware
matter, and the kernel is responsible for keeping track of it. By contrast,
whether or not a wakeup-capable device should issue wakeup events is a policy
decision, and it is managed by user space through a sysfs attribute: the
power/wakeup file. User space can write the strings "enabled" or "disabled" to
set or clear the "should_wakeup" flag, respectively. This file is only present
for wakeup-capable devices (i.e. devices whose "can_wakeup" flags are set)
and is created (or removed) by device_set_wakeup_capable(). Reads from the
file will return the corresponding string.
"power/wakeup" file. User space can write the strings "enabled" or "disabled"
to it to indicate whether or not, respectively, the device is supposed to signal
system wakeup. This file is only present if the "power.wakeup" object exists
for the given device and is created (or removed) along with that object, by
device_set_wakeup_capable(). Reads from the file will return the corresponding
string.
The device_may_wakeup() routine returns true only if both flags are set.
The "power/wakeup" file is supposed to contain the "disabled" string initially
for the majority of devices; the major exceptions are power buttons, keyboards,
and Ethernet adapters whose WoL (wake-on-LAN) feature has been set up with
ethtool. It should also default to "enabled" for devices that don't generate
wakeup requests on their own but merely forward wakeup requests from one bus to
another (like PCI Express ports).
The device_may_wakeup() routine returns true only if the "power.wakeup" object
exists and the corresponding "power/wakeup" file contains the string "enabled".
This information is used by subsystems, like the PCI bus type code, to see
whether or not to enable the devices' wakeup mechanisms. If device wakeup
mechanisms are enabled or disabled directly by drivers, they also should use
device_may_wakeup() to decide what to do during a system sleep transition.
However for runtime power management, wakeup events should be enabled whenever
the device and driver both support them, regardless of the should_wakeup flag.
Device drivers, however, are not supposed to call device_set_wakeup_enable()
directly in any case.
It ought to be noted that system wakeup is conceptually different from "remote
wakeup" used by runtime power management, although it may be supported by the
same physical mechanism. Remote wakeup is a feature allowing devices in
low-power states to trigger specific interrupts to signal conditions in which
they should be put into the full-power state. Those interrupts may or may not
be used to signal system wakeup events, depending on the hardware design. On
some systems it is impossible to trigger them from system sleep states. In any
case, remote wakeup should always be enabled for runtime power management for
all devices and drivers that support it.
/sys/devices/.../power/control files
------------------------------------
@ -249,20 +266,31 @@ for every device before the next phase begins. Not all busses or classes
support all these callbacks and not all drivers use all the callbacks. The
various phases always run after tasks have been frozen and before they are
unfrozen. Furthermore, the *_noirq phases run at a time when IRQ handlers have
been disabled (except for those marked with the IRQ_WAKEUP flag).
been disabled (except for those marked with the IRQF_NO_SUSPEND flag).
All phases use bus, type, or class callbacks (that is, methods defined in
dev->bus->pm, dev->type->pm, or dev->class->pm). These callbacks are mutually
exclusive, so if the device type provides a struct dev_pm_ops object pointed to
by its pm field (i.e. both dev->type and dev->type->pm are defined), the
callbacks included in that object (i.e. dev->type->pm) will be used. Otherwise,
if the class provides a struct dev_pm_ops object pointed to by its pm field
(i.e. both dev->class and dev->class->pm are defined), the PM core will use the
callbacks from that object (i.e. dev->class->pm). Finally, if the pm fields of
both the device type and class objects are NULL (or those objects do not exist),
the callbacks provided by the bus (that is, the callbacks from dev->bus->pm)
will be used (this allows device types to override callbacks provided by bus
types or classes if necessary).
All phases use PM domain, bus, type, or class callbacks (that is, methods
defined in dev->pm_domain->ops, dev->bus->pm, dev->type->pm, or dev->class->pm).
These callbacks are regarded by the PM core as mutually exclusive. Moreover,
PM domain callbacks always take precedence over bus, type and class callbacks,
while type callbacks take precedence over bus and class callbacks, and class
callbacks take precedence over bus callbacks. To be precise, the following
rules are used to determine which callback to execute in the given phase:
1. If dev->pm_domain is present, the PM core will attempt to execute the
callback included in dev->pm_domain->ops. If that callback is not
present, no action will be carried out for the given device.
2. Otherwise, if both dev->type and dev->type->pm are present, the callback
included in dev->type->pm will be executed.
3. Otherwise, if both dev->class and dev->class->pm are present, the
callback included in dev->class->pm will be executed.
4. Otherwise, if both dev->bus and dev->bus->pm are present, the callback
included in dev->bus->pm will be executed.
This allows PM domains and device types to override callbacks provided by bus
types or device classes if necessary.
These callbacks may in turn invoke device- or driver-specific methods stored in
dev->driver->pm, but they don't have to.
@ -283,9 +311,8 @@ When the system goes into the standby or memory sleep state, the phases are:
After the prepare callback method returns, no new children may be
registered below the device. The method may also prepare the device or
driver in some way for the upcoming system power transition (for
example, by allocating additional memory required for this purpose), but
it should not put the device into a low-power state.
driver in some way for the upcoming system power transition, but it
should not put the device into a low-power state.
2. The suspend methods should quiesce the device to stop it from performing
I/O. They also may save the device registers and put it into the

View file

@ -44,25 +44,33 @@ struct dev_pm_ops {
};
The ->runtime_suspend(), ->runtime_resume() and ->runtime_idle() callbacks
are executed by the PM core for either the power domain, or the device type
(if the device power domain's struct dev_pm_ops does not exist), or the class
(if the device power domain's and type's struct dev_pm_ops object does not
exist), or the bus type (if the device power domain's, type's and class'
struct dev_pm_ops objects do not exist) of the given device, so the priority
order of callbacks from high to low is that power domain callbacks, device
type callbacks, class callbacks and bus type callbacks, and the high priority
one will take precedence over low priority one. The bus type, device type and
class callbacks are referred to as subsystem-level callbacks in what follows,
and generally speaking, the power domain callbacks are used for representing
power domains within a SoC.
are executed by the PM core for the device's subsystem that may be either of
the following:
1. PM domain of the device, if the device's PM domain object, dev->pm_domain,
is present.
2. Device type of the device, if both dev->type and dev->type->pm are present.
3. Device class of the device, if both dev->class and dev->class->pm are
present.
4. Bus type of the device, if both dev->bus and dev->bus->pm are present.
The PM core always checks which callback to use in the order given above, so the
priority order of callbacks from high to low is: PM domain, device type, class
and bus type. Moreover, the high-priority one will always take precedence over
a low-priority one. The PM domain, bus type, device type and class callbacks
are referred to as subsystem-level callbacks in what follows.
By default, the callbacks are always invoked in process context with interrupts
enabled. However, subsystems can use the pm_runtime_irq_safe() helper function
to tell the PM core that a device's ->runtime_suspend() and ->runtime_resume()
callbacks should be invoked in atomic context with interrupts disabled.
This implies that these callback routines must not block or sleep, but it also
means that the synchronous helper functions listed at the end of Section 4 can
be used within an interrupt handler or in an atomic context.
to tell the PM core that their ->runtime_suspend(), ->runtime_resume() and
->runtime_idle() callbacks may be invoked in atomic context with interrupts
disabled for a given device. This implies that the callback routines in
question must not block or sleep, but it also means that the synchronous helper
functions listed at the end of Section 4 may be used for that device within an
interrupt handler or generally in an atomic context.
The subsystem-level suspend callback is _entirely_ _responsible_ for handling
the suspend of the device as appropriate, which may, but need not include

View file

@ -50,8 +50,7 @@ Machine DAI Configuration
The machine DAI configuration glues all the codec and CPU DAIs together. It can
also be used to set up the DAI system clock and for any machine related DAI
initialisation e.g. the machine audio map can be connected to the codec audio
map, unconnected codec pins can be set as such. Please see corgi.c, spitz.c
for examples.
map, unconnected codec pins can be set as such.
struct snd_soc_dai_link is used to set up each DAI in your machine. e.g.
@ -83,8 +82,7 @@ Machine Power Map
The machine driver can optionally extend the codec power map and to become an
audio power map of the audio subsystem. This allows for automatic power up/down
of speaker/HP amplifiers, etc. Codec pins can be connected to the machines jack
sockets in the machine init function. See soc/pxa/spitz.c and dapm.txt for
details.
sockets in the machine init function.
Machine Controls

View file

@ -90,10 +90,10 @@ ServiceBinary=%12%\USBSER.sys
[SourceDisksFiles]
[SourceDisksNames]
[DeviceList]
%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02
%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02, USB\VID_1D6B&PID_0106&MI_00
[DeviceList.NTamd64]
%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02
%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02, USB\VID_1D6B&PID_0106&MI_00
;------------------------------------------------------------------------------

View file

@ -511,8 +511,8 @@ M: Joerg Roedel <joerg.roedel@amd.com>
L: iommu@lists.linux-foundation.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu.git
S: Supported
F: arch/x86/kernel/amd_iommu*.c
F: arch/x86/include/asm/amd_iommu*.h
F: drivers/iommu/amd_iommu*.[ch]
F: include/linux/amd-iommu.h
AMD MICROCODE UPDATE SUPPORT
M: Andreas Herrmann <andreas.herrmann3@amd.com>
@ -789,6 +789,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.pengutronix.de/git/imx/linux-2.6.git
F: arch/arm/mach-mx*/
F: arch/arm/mach-imx/
F: arch/arm/plat-mxc/
ARM/FREESCALE IMX51
@ -804,6 +805,13 @@ S: Maintained
T: git git://git.linaro.org/people/shawnguo/linux-2.6.git
F: arch/arm/mach-imx/*imx6*
ARM/FREESCALE MXS ARM ARCHITECTURE
M: Shawn Guo <shawn.guo@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.linaro.org/people/shawnguo/linux-2.6.git
F: arch/arm/mach-mxs/
ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -1046,35 +1054,18 @@ ARM/SAMSUNG ARM ARCHITECTURES
M: Ben Dooks <ben-linux@fluff.org>
M: Kukjin Kim <kgene.kim@samsung.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
W: http://www.fluff.org/ben/linux/
S: Maintained
F: arch/arm/plat-samsung/
F: arch/arm/plat-s3c24xx/
F: arch/arm/plat-s5p/
F: arch/arm/mach-s3c24*/
F: arch/arm/mach-s3c64xx/
F: drivers/*/*s3c2410*
F: drivers/*/*/*s3c2410*
ARM/S3C2410 ARM ARCHITECTURE
M: Ben Dooks <ben-linux@fluff.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.fluff.org/ben/linux/
S: Maintained
F: arch/arm/mach-s3c2410/
ARM/S3C244x ARM ARCHITECTURE
M: Ben Dooks <ben-linux@fluff.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.fluff.org/ben/linux/
S: Maintained
F: arch/arm/mach-s3c2440/
F: arch/arm/mach-s3c2443/
ARM/S3C64xx ARM ARCHITECTURE
M: Ben Dooks <ben-linux@fluff.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.fluff.org/ben/linux/
S: Maintained
F: arch/arm/mach-s3c64xx/
F: drivers/spi/spi-s3c*
F: sound/soc/samsung/*
ARM/S5P EXYNOS ARM ARCHITECTURES
M: Kukjin Kim <kgene.kim@samsung.com>
@ -3110,6 +3101,7 @@ F: include/linux/hid*
HIGH-RESOLUTION TIMERS, CLOCKEVENTS, DYNTICKS
M: Thomas Gleixner <tglx@linutronix.de>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
S: Maintained
F: Documentation/timers/
F: kernel/hrtimer.c
@ -3619,7 +3611,7 @@ F: net/irda/
IRQ SUBSYSTEM
M: Thomas Gleixner <tglx@linutronix.de>
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git irq/core
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
F: kernel/irq/
ISAPNP
@ -4107,7 +4099,7 @@ F: drivers/hwmon/lm90.c
LOCKDEP AND LOCKSTAT
M: Peter Zijlstra <peterz@infradead.org>
M: Ingo Molnar <mingo@redhat.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git core/locking
S: Maintained
F: Documentation/lockdep*.txt
F: Documentation/lockstat.txt
@ -4311,8 +4303,9 @@ F: include/linux/mm.h
F: mm/
MEMORY RESOURCE CONTROLLER
M: Johannes Weiner <hannes@cmpxchg.org>
M: Michal Hocko <mhocko@suse.cz>
M: Balbir Singh <bsingharora@gmail.com>
M: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
M: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
L: cgroups@vger.kernel.org
L: linux-mm@kvack.org
@ -5094,6 +5087,7 @@ M: Peter Zijlstra <a.p.zijlstra@chello.nl>
M: Paul Mackerras <paulus@samba.org>
M: Ingo Molnar <mingo@elte.hu>
M: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
S: Supported
F: kernel/events/*
F: include/linux/perf_event.h
@ -5173,6 +5167,7 @@ F: drivers/scsi/pm8001/
POSIX CLOCKS and TIMERS
M: Thomas Gleixner <tglx@linutronix.de>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
S: Supported
F: fs/timerfd.c
F: include/linux/timer*
@ -5667,7 +5662,6 @@ F: drivers/media/video/*7146*
F: include/media/*7146*
SAMSUNG AUDIO (ASoC) DRIVERS
M: Jassi Brar <jassisinghbrar@gmail.com>
M: Sangbeom Kim <sbkim73@samsung.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Supported
@ -5689,6 +5683,7 @@ F: drivers/dma/dw_dmac.c
TIMEKEEPING, NTP
M: John Stultz <johnstul@us.ibm.com>
M: Thomas Gleixner <tglx@linutronix.de>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
S: Supported
F: include/linux/clocksource.h
F: include/linux/time.h
@ -5713,6 +5708,7 @@ F: drivers/watchdog/sc1200wdt.c
SCHEDULER
M: Ingo Molnar <mingo@elte.hu>
M: Peter Zijlstra <peterz@infradead.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git sched/core
S: Maintained
F: kernel/sched*
F: include/linux/sched.h
@ -6640,7 +6636,7 @@ TRACING
M: Steven Rostedt <rostedt@goodmis.org>
M: Frederic Weisbecker <fweisbec@gmail.com>
M: Ingo Molnar <mingo@redhat.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git perf/core
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
S: Maintained
F: Documentation/trace/ftrace.txt
F: arch/*/*/*/ftrace.h
@ -7390,7 +7386,7 @@ M: Thomas Gleixner <tglx@linutronix.de>
M: Ingo Molnar <mingo@redhat.com>
M: "H. Peter Anvin" <hpa@zytor.com>
M: x86@kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/core
S: Maintained
F: Documentation/x86/
F: arch/x86/

View file

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 2
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc6
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*

View file

@ -220,8 +220,9 @@ config NEED_MACH_MEMORY_H
be avoided when possible.
config PHYS_OFFSET
hex "Physical address of main memory"
hex "Physical address of main memory" if MMU
depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H
default DRAM_BASE if !MMU
help
Please provide the physical address corresponding to the
location of main memory in your system.
@ -1231,7 +1232,7 @@ config ARM_ERRATA_742231
capabilities of the processor.
config PL310_ERRATA_588369
bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines"
depends on CACHE_L2X0
help
The PL310 L2 cache controller implements three types of Clean &
@ -1256,7 +1257,7 @@ config ARM_ERRATA_720789
entries regardless of the ASID.
config PL310_ERRATA_727915
bool "Background Clean & Invalidate by Way operation can cause data corruption"
bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption"
depends on CACHE_L2X0
help
PL310 implements the Clean & Invalidate by Way L2 cache maintenance
@ -1289,8 +1290,8 @@ config ARM_ERRATA_751472
operation is received by a CPU before the ICIALLUIS has completed,
potentially leading to corrupted entries in the cache or TLB.
config ARM_ERRATA_753970
bool "ARM errata: cache sync operation may be faulty"
config PL310_ERRATA_753970
bool "PL310 errata: cache sync operation may be faulty"
depends on CACHE_PL310
help
This option enables the workaround for the 753970 PL310 (r3p0) erratum.
@ -1352,6 +1353,18 @@ config ARM_ERRATA_764369
relevant cache maintenance functions and sets a specific bit
in the diagnostic control register of the SCU.
config PL310_ERRATA_769419
bool "PL310 errata: no automatic Store Buffer drain"
depends on CACHE_L2X0
help
On revisions of the PL310 prior to r3p2, the Store Buffer does
not automatically drain. This can cause normal, non-cacheable
writes to be retained when the memory system is idle, leading
to suboptimal I/O performance for drivers using coherent DMA.
This option adds a write barrier to the cpu_idle loop so that,
on systems with an outer cache, the store buffer is drained
explicitly.
endmenu
source "arch/arm/common/Kconfig"

View file

@ -526,7 +526,8 @@ static void __init gic_pm_init(struct gic_chip_data *gic)
sizeof(u32));
BUG_ON(!gic->saved_ppi_conf);
cpu_pm_register_notifier(&gic_notifier_block);
if (gic == &gic_data[0])
cpu_pm_register_notifier(&gic_notifier_block);
}
#else
static void __init gic_pm_init(struct gic_chip_data *gic)
@ -581,13 +582,16 @@ void __init gic_init(unsigned int gic_nr, int irq_start,
* For primary GICs, skip over SGIs.
* For secondary GICs, skip over PPIs, too.
*/
domain->hwirq_base = 32;
if (gic_nr == 0) {
gic_cpu_base_addr = cpu_base;
domain->hwirq_base = 16;
if (irq_start > 0)
irq_start = (irq_start & ~31) + 16;
} else
domain->hwirq_base = 32;
if ((irq_start & 31) > 0) {
domain->hwirq_base = 16;
if (irq_start != -1)
irq_start = (irq_start & ~31) + 16;
}
}
/*
* Find out how many interrupts are supported.

View file

@ -1211,8 +1211,8 @@ static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
ccr |= (rqc->dcctl << CC_SRCCCTRL_SHFT);
ccr |= (rqc->scctl << CC_DSTCCTRL_SHFT);
ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT);
ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT);
ccr |= (rqc->swap << CC_SWAP_SHFT);
@ -1623,6 +1623,11 @@ static inline int _alloc_event(struct pl330_thread *thrd)
return -1;
}
static bool _chan_ns(const struct pl330_info *pi, int i)
{
return pi->pcfg.irq_ns & (1 << i);
}
/* Upon success, returns IdentityToken for the
* allocated channel, NULL otherwise.
*/
@ -1647,7 +1652,8 @@ void *pl330_request_channel(const struct pl330_info *pi)
for (i = 0; i < chans; i++) {
thrd = &pl330->channels[i];
if (thrd->free) {
if ((thrd->free) && (!_manager_ns(thrd) ||
_chan_ns(pi, i))) {
thrd->ev = _alloc_event(thrd);
if (thrd->ev >= 0) {
thrd->free = false;

View file

@ -38,7 +38,6 @@ CONFIG_IP_PNP_RARP=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
@ -52,16 +51,12 @@ CONFIG_MTD_NAND_ATMEL=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_SSC=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
@ -81,7 +76,6 @@ CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_FB=y
CONFIG_FB_ATMEL=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
@ -99,7 +93,6 @@ CONFIG_MMC_AT91=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y

View file

@ -5,7 +5,6 @@ CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
@ -56,7 +55,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -75,18 +73,8 @@ CONFIG_IPV6_TUNNEL=m
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AFS_PARTS=y
CONFIG_MTD_CHAR=y
@ -108,8 +96,6 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_TCLIB=y
CONFIG_EEPROM_LEGACY=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=m
@ -119,14 +105,23 @@ CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_TUN=m
CONFIG_ARM_AT91_ETHER=y
CONFIG_PHYLIB=y
CONFIG_DAVICOM_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=m
CONFIG_PPP_ASYNC=y
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
@ -139,18 +134,6 @@ CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_EPSON2888=y
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
@ -158,9 +141,9 @@ CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_LEGACY_PTY_COUNT=32
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_LEGACY_PTY_COUNT=32
CONFIG_HW_RANDOM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
@ -290,7 +273,6 @@ CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_SMB_FS=m
CONFIG_CIFS=m
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
@ -335,7 +317,6 @@ CONFIG_NLS_UTF8=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FTRACE is not set
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_SHA1=y

View file

@ -12,11 +12,23 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9260=y
CONFIG_ARCH_AT91SAM9260_SAM9XE=y
CONFIG_MACH_AT91SAM9260EK=y
CONFIG_MACH_CAM60=y
CONFIG_MACH_SAM9_L9260=y
CONFIG_MACH_AFEB9260=y
CONFIG_MACH_USB_A9260=y
CONFIG_MACH_QIL_A9260=y
CONFIG_MACH_CPU9260=y
CONFIG_MACH_FLEXIBITY=y
CONFIG_MACH_SNAPPER_9260=y
CONFIG_MACH_AT91SAM_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
@ -33,12 +45,10 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_SSC=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
@ -55,7 +65,6 @@ CONFIG_I2C_GPIO=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91SAM9X_WATCHDOG=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
@ -71,7 +80,6 @@ CONFIG_USB_G_SERIAL=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y

View file

@ -14,6 +14,15 @@ CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9G20=y
CONFIG_MACH_AT91SAM9G20EK=y
CONFIG_MACH_AT91SAM9G20EK_2MMC=y
CONFIG_MACH_CPU9G20=y
CONFIG_MACH_ACMENETUSFOXG20=y
CONFIG_MACH_PORTUXG20=y
CONFIG_MACH_STAMP9G20=y
CONFIG_MACH_PCONTROL_G20=y
CONFIG_MACH_GSIA18S=y
CONFIG_MACH_USB_A9G20=y
CONFIG_MACH_SNAPPER_9260=y
CONFIG_MACH_AT91SAM_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_AEABI=y
@ -21,9 +30,10 @@ CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@ -37,8 +47,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
@ -48,17 +56,13 @@ CONFIG_MTD_NAND_ATMEL=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_SSC=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
@ -66,15 +70,14 @@ CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_LEGACY_PTY_COUNT=16
CONFIG_HW_RANDOM=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
CONFIG_SPI_SPIDEV=y
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SEQUENCER=y
@ -82,7 +85,6 @@ CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PROCFS is not set
CONFIG_SND_AT73C213=y
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
@ -105,7 +107,6 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y

View file

@ -18,6 +18,7 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9G45=y
CONFIG_MACH_AT91SAM9M10G45EK=y
CONFIG_MACH_AT91SAM_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AT91_SLOW_CLOCK=y
CONFIG_AEABI=y
@ -73,11 +74,8 @@ CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_DAVICOM_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_MACB=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_DAVICOM_PHY=y
CONFIG_LIBERTAS_THINFIRM=m
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_AT76C50X_USB=m
@ -131,7 +129,6 @@ CONFIG_I2C_GPIO=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
# CONFIG_HWMON is not set
# CONFIG_MFD_SUPPORT is not set
CONFIG_FB=y
CONFIG_FB_ATMEL=y
CONFIG_FB_UDL=m

View file

@ -23,8 +23,6 @@ CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
@ -35,7 +33,6 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=4
CONFIG_BLK_DEV_RAM_SIZE=24576
CONFIG_ATMEL_SSC=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
@ -62,13 +59,11 @@ CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_FB=y
CONFIG_FB_ATMEL=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_MMC=y
CONFIG_MMC_AT91=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y

View file

@ -287,7 +287,7 @@ CONFIG_USB=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_PXA27X=y
CONFIG_USB_PXA27X=y
CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
CONFIG_MMC=y

View file

@ -263,7 +263,7 @@ CONFIG_USB=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_PXA27X=y
CONFIG_USB_PXA27X=y
CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
CONFIG_MMC=y

View file

@ -132,7 +132,7 @@ CONFIG_USB_MON=m
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_VBUS_DRAW=500
CONFIG_USB_GADGET_PXA27X=y
CONFIG_USB_PXA27X=y
CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
CONFIG_USB_GADGETFS=m

View file

@ -48,13 +48,7 @@ CONFIG_MACH_SX1=y
CONFIG_MACH_NOKIA770=y
CONFIG_MACH_AMS_DELTA=y
CONFIG_MACH_OMAP_GENERIC=y
CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
CONFIG_OMAP_ARM_216MHZ=y
CONFIG_OMAP_ARM_195MHZ=y
CONFIG_OMAP_ARM_192MHZ=y
CONFIG_OMAP_ARM_182MHZ=y
CONFIG_OMAP_ARM_168MHZ=y
# CONFIG_OMAP_ARM_60MHZ is not set
# CONFIG_ARM_THUMB is not set
CONFIG_PCCARD=y
CONFIG_OMAP_CF=y

View file

@ -14,8 +14,6 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_U300=y
CONFIG_MACH_U300=y
CONFIG_MACH_U300_BS335=y
CONFIG_MACH_U300_DUAL_RAM=y
CONFIG_U300_DEBUG=y
CONFIG_MACH_U300_SPIDUMMY=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
@ -26,19 +24,21 @@ CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
CONFIG_CPU_IDLE=y
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
# CONFIG_SUSPEND is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_FSMC=y
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
# CONFIG_HWMON is not set
@ -51,6 +51,7 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_CLKGATE=y
CONFIG_MMC_ARMMMCI=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
@ -65,10 +66,8 @@ CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_CRC32 is not set

View file

@ -10,7 +10,7 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_U8500=y
CONFIG_UX500_SOC_DB5500=y
CONFIG_UX500_SOC_DB8500=y
CONFIG_MACH_U8500=y
CONFIG_MACH_HREFV60=y
CONFIG_MACH_SNOWBALL=y
CONFIG_MACH_U5500=y
CONFIG_NO_HZ=y
@ -24,6 +24,7 @@ CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@ -41,11 +42,8 @@ CONFIG_MISC_DEVICES=y
CONFIG_AB8500_PWM=y
CONFIG_SENSORS_BH1780=y
CONFIG_NETDEVICES=y
CONFIG_SMSC_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_SMSC911X=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_SMSC_PHY=y
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
@ -72,15 +70,12 @@ CONFIG_SPI=y
CONFIG_SPI_PL022=y
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
# CONFIG_HWMON is not set
CONFIG_MFD_STMPE=y
CONFIG_MFD_TC3589X=y
CONFIG_AB5500_CORE=y
CONFIG_AB8500_CORE=y
CONFIG_REGULATOR_AB8500=y
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_GADGET_MUSB_HDRC=y
CONFIG_MUSB_PIO_ONLY=y
CONFIG_USB_GADGET=y
CONFIG_AB8500_USB=y
CONFIG_MMC=y
@ -97,6 +92,7 @@ CONFIG_DMADEVICES=y
CONFIG_STE_DMA40=y
CONFIG_STAGING=y
CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y
CONFIG_HSEM_U8500=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y

View file

@ -140,7 +140,7 @@ CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_GADGET=m
CONFIG_USB_GADGET_PXA27X=y
CONFIG_USB_PXA27X=y
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m

View file

@ -55,16 +55,6 @@ reserve_pmu(enum arm_pmu_type type);
extern void
release_pmu(enum arm_pmu_type type);
/**
* init_pmu() - Initialise the PMU.
*
* Initialise the system ready for PMU enabling. This should typically set the
* IRQ affinity and nothing else. The users (oprofile/perf events etc) will do
* the actual hardware initialisation.
*/
extern int
init_pmu(enum arm_pmu_type type);
#else /* CONFIG_CPU_HAS_PMU */
#include <linux/err.h>

View file

@ -25,7 +25,7 @@ extern struct cputopo_arm cpu_topology[NR_CPUS];
void init_cpu_topology(void);
void store_cpu_topology(unsigned int cpuid);
const struct cpumask *cpu_coregroup_mask(unsigned int cpu);
const struct cpumask *cpu_coregroup_mask(int cpu);
#else

View file

@ -30,14 +30,15 @@ enum unwind_reason_code {
};
struct unwind_idx {
unsigned long addr;
unsigned long addr_offset;
unsigned long insn;
};
struct unwind_table {
struct list_head list;
struct unwind_idx *start;
struct unwind_idx *stop;
const struct unwind_idx *start;
const struct unwind_idx *origin;
const struct unwind_idx *stop;
unsigned long begin_addr;
unsigned long end_addr;
};
@ -49,15 +50,6 @@ extern struct unwind_table *unwind_table_add(unsigned long start,
extern void unwind_table_del(struct unwind_table *tab);
extern void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk);
#ifdef CONFIG_ARM_UNWIND
extern int __init unwind_init(void);
#else
static inline int __init unwind_init(void)
{
return 0;
}
#endif
#endif /* !__ASSEMBLY__ */
#ifdef CONFIG_ARM_UNWIND

View file

@ -497,7 +497,7 @@ ENDPROC(__und_usr)
.popsection
.pushsection __ex_table,"a"
.long 1b, 4b
#if __LINUX_ARM_ARCH__ >= 7
#if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7
.long 2b, 4b
.long 3b, 4b
#endif

View file

@ -519,10 +519,12 @@ static const union decode_item arm_cccc_0000_____1001_table[] = {
static const union decode_item arm_cccc_0001_____1001_table[] = {
/* Synchronization primitives */
#if __LINUX_ARM_ARCH__ < 6
/* Deprecated on ARMv6 and may be UNDEFINED on v7 */
/* SMP/SWPB cccc 0001 0x00 xxxx xxxx xxxx 1001 xxxx */
DECODE_EMULATEX (0x0fb000f0, 0x01000090, emulate_rd12rn16rm0_rwflags_nopc,
REGS(NOPC, NOPC, 0, 0, NOPC)),
#endif
/* LDREX/STREX{,D,B,H} cccc 0001 1xxx xxxx xxxx xxxx 1001 xxxx */
/* And unallocated instructions... */
DECODE_END

View file

@ -427,18 +427,25 @@ void kprobe_arm_test_cases(void)
TEST_GROUP("Synchronization primitives")
/*
* Use hard coded constants for SWP instructions to avoid warnings
* about deprecated instructions.
*/
TEST_RP( ".word 0xe108e097 @ swp lr, r",7,VAL2,", [r",8,0,"]")
TEST_R( ".word 0x610d0091 @ swpvs r0, r",1,VAL1,", [sp]")
TEST_RP( ".word 0xe10cd09e @ swp sp, r",14,VAL2,", [r",12,13*4,"]")
#if __LINUX_ARM_ARCH__ < 6
TEST_RP("swp lr, r",7,VAL2,", [r",8,0,"]")
TEST_R( "swpvs r0, r",1,VAL1,", [sp]")
TEST_RP("swp sp, r",14,VAL2,", [r",12,13*4,"]")
#else
TEST_UNSUPPORTED(".word 0xe108e097 @ swp lr, r7, [r8]")
TEST_UNSUPPORTED(".word 0x610d0091 @ swpvs r0, r1, [sp]")
TEST_UNSUPPORTED(".word 0xe10cd09e @ swp sp, r14 [r12]")
#endif
TEST_UNSUPPORTED(".word 0xe102f091 @ swp pc, r1, [r2]")
TEST_UNSUPPORTED(".word 0xe102009f @ swp r0, pc, [r2]")
TEST_UNSUPPORTED(".word 0xe10f0091 @ swp r0, r1, [pc]")
TEST_RP( ".word 0xe148e097 @ swpb lr, r",7,VAL2,", [r",8,0,"]")
TEST_R( ".word 0x614d0091 @ swpvsb r0, r",1,VAL1,", [sp]")
#if __LINUX_ARM_ARCH__ < 6
TEST_RP("swpb lr, r",7,VAL2,", [r",8,0,"]")
TEST_R( "swpvsb r0, r",1,VAL1,", [sp]")
#else
TEST_UNSUPPORTED(".word 0xe148e097 @ swpb lr, r7, [r8]")
TEST_UNSUPPORTED(".word 0x614d0091 @ swpvsb r0, r1, [sp]")
#endif
TEST_UNSUPPORTED(".word 0xe142f091 @ swpb pc, r1, [r2]")
TEST_UNSUPPORTED(".word 0xe1100090") /* Unallocated space */
@ -550,7 +557,7 @@ void kprobe_arm_test_cases(void)
TEST_RPR( "strccd r",8, VAL2,", [r",13,0, ", r",12,48,"]")
TEST_RPR( "strd r",4, VAL1,", [r",2, 24,", r",3, 48,"]!")
TEST_RPR( "strcsd r",12,VAL2,", [r",11,48,", -r",10,24,"]!")
TEST_RPR( "strd r",2, VAL1,", [r",3, 24,"], r",4,48,"")
TEST_RPR( "strd r",2, VAL1,", [r",5, 24,"], r",4,48,"")
TEST_RPR( "strd r",10,VAL2,", [r",9, 48,"], -r",7,24,"")
TEST_UNSUPPORTED(".word 0xe1afc0fa @ strd r12, [pc, r10]!")

View file

@ -222,8 +222,8 @@ void kprobe_thumb16_test_cases(void)
DONT_TEST_IN_ITBLOCK(
TEST_BF_R( "cbnz r",0,0, ", 2f")
TEST_BF_R( "cbz r",2,-1,", 2f")
TEST_BF_RX( "cbnz r",4,1, ", 2f",0x20)
TEST_BF_RX( "cbz r",7,0, ", 2f",0x40)
TEST_BF_RX( "cbnz r",4,1, ", 2f", SPACE_0x20)
TEST_BF_RX( "cbz r",7,0, ", 2f", SPACE_0x40)
)
TEST_R("sxth r0, r",7, HH1,"")
TEST_R("sxth r7, r",0, HH2,"")
@ -246,7 +246,7 @@ DONT_TEST_IN_ITBLOCK(
TESTCASE_START(code) \
TEST_ARG_PTR(13, offset) \
TEST_ARG_END("") \
TEST_BRANCH_F(code,0) \
TEST_BRANCH_F(code) \
TESTCASE_END
TEST("push {r0}")
@ -319,8 +319,8 @@ CONDITION_INSTRUCTIONS(8,
TEST_BF( "b 2f")
TEST_BB( "b 2b")
TEST_BF_X("b 2f", 0x400)
TEST_BB_X("b 2b", 0x400)
TEST_BF_X("b 2f", SPACE_0x400)
TEST_BB_X("b 2b", SPACE_0x400)
TEST_GROUP("Testing instructions in IT blocks")
@ -746,7 +746,7 @@ CONDITION_INSTRUCTIONS(22,
TEST_BB("bne.w 2b")
TEST_BF("bgt.w 2f")
TEST_BB("blt.w 2b")
TEST_BF_X("bpl.w 2f",0x1000)
TEST_BF_X("bpl.w 2f", SPACE_0x1000)
)
TEST_UNSUPPORTED("msr cpsr, r0")
@ -786,11 +786,11 @@ CONDITION_INSTRUCTIONS(22,
TEST_BF( "b.w 2f")
TEST_BB( "b.w 2b")
TEST_BF_X("b.w 2f", 0x1000)
TEST_BF_X("b.w 2f", SPACE_0x1000)
TEST_BF( "bl.w 2f")
TEST_BB( "bl.w 2b")
TEST_BB_X("bl.w 2b", 0x1000)
TEST_BB_X("bl.w 2b", SPACE_0x1000)
TEST_X( "blx __dummy_arm_subroutine",
".arm \n\t"

View file

@ -149,23 +149,31 @@ struct test_arg_end {
"1: "instruction" \n\t" \
" nop \n\t"
#define TEST_BRANCH_F(instruction, xtra_dist) \
#define TEST_BRANCH_F(instruction) \
TEST_INSTRUCTION(instruction) \
".if "#xtra_dist" \n\t" \
" b 99f \n\t" \
".space "#xtra_dist" \n\t" \
".endif \n\t" \
" b 99f \n\t" \
"2: nop \n\t"
#define TEST_BRANCH_B(instruction, xtra_dist) \
#define TEST_BRANCH_B(instruction) \
" b 50f \n\t" \
" b 99f \n\t" \
"2: nop \n\t" \
" b 99f \n\t" \
".if "#xtra_dist" \n\t" \
".space "#xtra_dist" \n\t" \
".endif \n\t" \
TEST_INSTRUCTION(instruction)
#define TEST_BRANCH_FX(instruction, codex) \
TEST_INSTRUCTION(instruction) \
" b 99f \n\t" \
codex" \n\t" \
" b 99f \n\t" \
"2: nop \n\t"
#define TEST_BRANCH_BX(instruction, codex) \
" b 50f \n\t" \
" b 99f \n\t" \
"2: nop \n\t" \
" b 99f \n\t" \
codex" \n\t" \
TEST_INSTRUCTION(instruction)
#define TESTCASE_END \
@ -301,47 +309,60 @@ struct test_arg_end {
TESTCASE_START(code1 #reg1 code2) \
TEST_ARG_PTR(reg1, val1) \
TEST_ARG_END("") \
TEST_BRANCH_F(code1 #reg1 code2, 0) \
TEST_BRANCH_F(code1 #reg1 code2) \
TESTCASE_END
#define TEST_BF_X(code, xtra_dist) \
#define TEST_BF(code) \
TESTCASE_START(code) \
TEST_ARG_END("") \
TEST_BRANCH_F(code, xtra_dist) \
TEST_BRANCH_F(code) \
TESTCASE_END
#define TEST_BB_X(code, xtra_dist) \
#define TEST_BB(code) \
TESTCASE_START(code) \
TEST_ARG_END("") \
TEST_BRANCH_B(code, xtra_dist) \
TEST_BRANCH_B(code) \
TESTCASE_END
#define TEST_BF_RX(code1, reg, val, code2, xtra_dist) \
TESTCASE_START(code1 #reg code2) \
TEST_ARG_REG(reg, val) \
TEST_ARG_END("") \
TEST_BRANCH_F(code1 #reg code2, xtra_dist) \
#define TEST_BF_R(code1, reg, val, code2) \
TESTCASE_START(code1 #reg code2) \
TEST_ARG_REG(reg, val) \
TEST_ARG_END("") \
TEST_BRANCH_F(code1 #reg code2) \
TESTCASE_END
#define TEST_BB_RX(code1, reg, val, code2, xtra_dist) \
TESTCASE_START(code1 #reg code2) \
TEST_ARG_REG(reg, val) \
TEST_ARG_END("") \
TEST_BRANCH_B(code1 #reg code2, xtra_dist) \
#define TEST_BB_R(code1, reg, val, code2) \
TESTCASE_START(code1 #reg code2) \
TEST_ARG_REG(reg, val) \
TEST_ARG_END("") \
TEST_BRANCH_B(code1 #reg code2) \
TESTCASE_END
#define TEST_BF(code) TEST_BF_X(code, 0)
#define TEST_BB(code) TEST_BB_X(code, 0)
#define TEST_BF_R(code1, reg, val, code2) TEST_BF_RX(code1, reg, val, code2, 0)
#define TEST_BB_R(code1, reg, val, code2) TEST_BB_RX(code1, reg, val, code2, 0)
#define TEST_BF_RR(code1, reg1, val1, code2, reg2, val2, code3) \
TESTCASE_START(code1 #reg1 code2 #reg2 code3) \
TEST_ARG_REG(reg1, val1) \
TEST_ARG_REG(reg2, val2) \
TEST_ARG_END("") \
TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3, 0) \
TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3) \
TESTCASE_END
#define TEST_BF_X(code, codex) \
TESTCASE_START(code) \
TEST_ARG_END("") \
TEST_BRANCH_FX(code, codex) \
TESTCASE_END
#define TEST_BB_X(code, codex) \
TESTCASE_START(code) \
TEST_ARG_END("") \
TEST_BRANCH_BX(code, codex) \
TESTCASE_END
#define TEST_BF_RX(code1, reg, val, code2, codex) \
TESTCASE_START(code1 #reg code2) \
TEST_ARG_REG(reg, val) \
TEST_ARG_END("") \
TEST_BRANCH_FX(code1 #reg code2, codex) \
TESTCASE_END
#define TEST_X(code, codex) \
@ -372,6 +393,25 @@ struct test_arg_end {
TESTCASE_END
/*
* Macros for defining space directives spread over multiple lines.
* These are required so the compiler guesses better the length of inline asm
* code and will spill the literal pool early enough to avoid generating PC
* relative loads with out of range offsets.
*/
#define TWICE(x) x x
#define SPACE_0x8 TWICE(".space 4\n\t")
#define SPACE_0x10 TWICE(SPACE_0x8)
#define SPACE_0x20 TWICE(SPACE_0x10)
#define SPACE_0x40 TWICE(SPACE_0x20)
#define SPACE_0x80 TWICE(SPACE_0x40)
#define SPACE_0x100 TWICE(SPACE_0x80)
#define SPACE_0x200 TWICE(SPACE_0x100)
#define SPACE_0x400 TWICE(SPACE_0x200)
#define SPACE_0x800 TWICE(SPACE_0x400)
#define SPACE_0x1000 TWICE(SPACE_0x800)
/* Various values used in test cases... */
#define N(val) (val ^ 0xffffffff)
#define VAL1 0x12345678

View file

@ -343,19 +343,25 @@ validate_group(struct perf_event *event)
{
struct perf_event *sibling, *leader = event->group_leader;
struct pmu_hw_events fake_pmu;
DECLARE_BITMAP(fake_used_mask, ARMPMU_MAX_HWEVENTS);
memset(&fake_pmu, 0, sizeof(fake_pmu));
/*
* Initialise the fake PMU. We only need to populate the
* used_mask for the purposes of validation.
*/
memset(fake_used_mask, 0, sizeof(fake_used_mask));
fake_pmu.used_mask = fake_used_mask;
if (!validate_event(&fake_pmu, leader))
return -ENOSPC;
return -EINVAL;
list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
if (!validate_event(&fake_pmu, sibling))
return -ENOSPC;
return -EINVAL;
}
if (!validate_event(&fake_pmu, event))
return -ENOSPC;
return -EINVAL;
return 0;
}
@ -396,6 +402,9 @@ armpmu_reserve_hardware(struct arm_pmu *armpmu)
int i, err, irq, irqs;
struct platform_device *pmu_device = armpmu->plat_device;
if (!pmu_device)
return -ENODEV;
err = reserve_pmu(armpmu->type);
if (err) {
pr_warning("unable to reserve pmu\n");
@ -631,6 +640,9 @@ static struct platform_device_id armpmu_plat_device_ids[] = {
static int __devinit armpmu_device_probe(struct platform_device *pdev)
{
if (!cpu_pmu)
return -ENODEV;
cpu_pmu->plat_device = pdev;
return 0;
}

View file

@ -33,3 +33,4 @@ release_pmu(enum arm_pmu_type type)
{
clear_bit_unlock(type, pmu_lock);
}
EXPORT_SYMBOL_GPL(release_pmu);

View file

@ -192,6 +192,9 @@ void cpu_idle(void)
#endif
local_irq_disable();
#ifdef CONFIG_PL310_ERRATA_769419
wmb();
#endif
if (hlt_counter) {
local_irq_enable();
cpu_relax();

View file

@ -895,8 +895,6 @@ void __init setup_arch(char **cmdline_p)
{
struct machine_desc *mdesc;
unwind_init();
setup_processor();
mdesc = setup_machine_fdt(__atags_pointer);
if (!mdesc)
@ -904,6 +902,12 @@ void __init setup_arch(char **cmdline_p)
machine_desc = mdesc;
machine_name = mdesc->name;
#ifdef CONFIG_ZONE_DMA
if (mdesc->dma_zone_size) {
extern unsigned long arm_dma_zone_size;
arm_dma_zone_size = mdesc->dma_zone_size;
}
#endif
if (mdesc->soft_reboot)
reboot_setup("s");
@ -934,12 +938,6 @@ void __init setup_arch(char **cmdline_p)
tcm_init();
#ifdef CONFIG_ZONE_DMA
if (mdesc->dma_zone_size) {
extern unsigned long arm_dma_zone_size;
arm_dma_zone_size = mdesc->dma_zone_size;
}
#endif
#ifdef CONFIG_MULTI_IRQ_HANDLER
handle_arch_irq = mdesc->handle_irq;
#endif

View file

@ -43,7 +43,7 @@
struct cputopo_arm cpu_topology[NR_CPUS];
const struct cpumask *cpu_coregroup_mask(unsigned int cpu)
const struct cpumask *cpu_coregroup_mask(int cpu)
{
return &cpu_topology[cpu].core_sibling;
}

View file

@ -67,7 +67,7 @@ EXPORT_SYMBOL(__aeabi_unwind_cpp_pr2);
struct unwind_ctrl_block {
unsigned long vrs[16]; /* virtual register set */
unsigned long *insn; /* pointer to the current instructions word */
const unsigned long *insn; /* pointer to the current instructions word */
int entries; /* number of entries left to interpret */
int byte; /* current byte number in the instructions word */
};
@ -83,8 +83,9 @@ enum regs {
PC = 15
};
extern struct unwind_idx __start_unwind_idx[];
extern struct unwind_idx __stop_unwind_idx[];
extern const struct unwind_idx __start_unwind_idx[];
static const struct unwind_idx *__origin_unwind_idx;
extern const struct unwind_idx __stop_unwind_idx[];
static DEFINE_SPINLOCK(unwind_lock);
static LIST_HEAD(unwind_tables);
@ -98,45 +99,99 @@ static LIST_HEAD(unwind_tables);
})
/*
* Binary search in the unwind index. The entries entries are
* Binary search in the unwind index. The entries are
* guaranteed to be sorted in ascending order by the linker.
*
* start = first entry
* origin = first entry with positive offset (or stop if there is no such entry)
* stop - 1 = last entry
*/
static struct unwind_idx *search_index(unsigned long addr,
struct unwind_idx *first,
struct unwind_idx *last)
static const struct unwind_idx *search_index(unsigned long addr,
const struct unwind_idx *start,
const struct unwind_idx *origin,
const struct unwind_idx *stop)
{
pr_debug("%s(%08lx, %p, %p)\n", __func__, addr, first, last);
unsigned long addr_prel31;
if (addr < first->addr) {
pr_warning("unwind: Unknown symbol address %08lx\n", addr);
return NULL;
} else if (addr >= last->addr)
return last;
pr_debug("%s(%08lx, %p, %p, %p)\n",
__func__, addr, start, origin, stop);
while (first < last - 1) {
struct unwind_idx *mid = first + ((last - first + 1) >> 1);
/*
* only search in the section with the matching sign. This way the
* prel31 numbers can be compared as unsigned longs.
*/
if (addr < (unsigned long)start)
/* negative offsets: [start; origin) */
stop = origin;
else
/* positive offsets: [origin; stop) */
start = origin;
if (addr < mid->addr)
last = mid;
else
first = mid;
/* prel31 for address relavive to start */
addr_prel31 = (addr - (unsigned long)start) & 0x7fffffff;
while (start < stop - 1) {
const struct unwind_idx *mid = start + ((stop - start) >> 1);
/*
* As addr_prel31 is relative to start an offset is needed to
* make it relative to mid.
*/
if (addr_prel31 - ((unsigned long)mid - (unsigned long)start) <
mid->addr_offset)
stop = mid;
else {
/* keep addr_prel31 relative to start */
addr_prel31 -= ((unsigned long)mid -
(unsigned long)start);
start = mid;
}
}
return first;
if (likely(start->addr_offset <= addr_prel31))
return start;
else {
pr_warning("unwind: Unknown symbol address %08lx\n", addr);
return NULL;
}
}
static struct unwind_idx *unwind_find_idx(unsigned long addr)
static const struct unwind_idx *unwind_find_origin(
const struct unwind_idx *start, const struct unwind_idx *stop)
{
struct unwind_idx *idx = NULL;
pr_debug("%s(%p, %p)\n", __func__, start, stop);
while (start < stop) {
const struct unwind_idx *mid = start + ((stop - start) >> 1);
if (mid->addr_offset >= 0x40000000)
/* negative offset */
start = mid + 1;
else
/* positive offset */
stop = mid;
}
pr_debug("%s -> %p\n", __func__, stop);
return stop;
}
static const struct unwind_idx *unwind_find_idx(unsigned long addr)
{
const struct unwind_idx *idx = NULL;
unsigned long flags;
pr_debug("%s(%08lx)\n", __func__, addr);
if (core_kernel_text(addr))
if (core_kernel_text(addr)) {
if (unlikely(!__origin_unwind_idx))
__origin_unwind_idx =
unwind_find_origin(__start_unwind_idx,
__stop_unwind_idx);
/* main unwind table */
idx = search_index(addr, __start_unwind_idx,
__stop_unwind_idx - 1);
else {
__origin_unwind_idx,
__stop_unwind_idx);
} else {
/* module unwind tables */
struct unwind_table *table;
@ -145,7 +200,8 @@ static struct unwind_idx *unwind_find_idx(unsigned long addr)
if (addr >= table->begin_addr &&
addr < table->end_addr) {
idx = search_index(addr, table->start,
table->stop - 1);
table->origin,
table->stop);
/* Move-to-front to exploit common traces */
list_move(&table->list, &unwind_tables);
break;
@ -274,7 +330,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
int unwind_frame(struct stackframe *frame)
{
unsigned long high, low;
struct unwind_idx *idx;
const struct unwind_idx *idx;
struct unwind_ctrl_block ctrl;
/* only go to a higher address on the stack */
@ -399,7 +455,6 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size,
unsigned long text_size)
{
unsigned long flags;
struct unwind_idx *idx;
struct unwind_table *tab = kmalloc(sizeof(*tab), GFP_KERNEL);
pr_debug("%s(%08lx, %08lx, %08lx, %08lx)\n", __func__, start, size,
@ -408,15 +463,12 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size,
if (!tab)
return tab;
tab->start = (struct unwind_idx *)start;
tab->stop = (struct unwind_idx *)(start + size);
tab->start = (const struct unwind_idx *)start;
tab->stop = (const struct unwind_idx *)(start + size);
tab->origin = unwind_find_origin(tab->start, tab->stop);
tab->begin_addr = text_addr;
tab->end_addr = text_addr + text_size;
/* Convert the symbol addresses to absolute values */
for (idx = tab->start; idx < tab->stop; idx++)
idx->addr = prel31_to_addr(&idx->addr);
spin_lock_irqsave(&unwind_lock, flags);
list_add_tail(&tab->list, &unwind_tables);
spin_unlock_irqrestore(&unwind_lock, flags);
@ -437,16 +489,3 @@ void unwind_table_del(struct unwind_table *tab)
kfree(tab);
}
int __init unwind_init(void)
{
struct unwind_idx *idx;
/* Convert the symbol addresses to absolute values */
for (idx = __start_unwind_idx; idx < __stop_unwind_idx; idx++)
idx->addr = prel31_to_addr(&idx->addr);
pr_debug("unwind: ARM stack unwinding initialised\n");
return 0;
}

View file

@ -1,5 +1,9 @@
#include <asm/unwind.h>
#if __LINUX_ARM_ARCH__ >= 6
.macro bitop, instr
.macro bitop, name, instr
ENTRY( \name )
UNWIND( .fnstart )
ands ip, r1, #3
strneb r1, [ip] @ assert word-aligned
mov r2, #1
@ -13,9 +17,13 @@
cmp r0, #0
bne 1b
bx lr
UNWIND( .fnend )
ENDPROC(\name )
.endm
.macro testop, instr, store
.macro testop, name, instr, store
ENTRY( \name )
UNWIND( .fnstart )
ands ip, r1, #3
strneb r1, [ip] @ assert word-aligned
mov r2, #1
@ -34,9 +42,13 @@
cmp r0, #0
movne r0, #1
2: bx lr
UNWIND( .fnend )
ENDPROC(\name )
.endm
#else
.macro bitop, instr
.macro bitop, name, instr
ENTRY( \name )
UNWIND( .fnstart )
ands ip, r1, #3
strneb r1, [ip] @ assert word-aligned
and r2, r0, #31
@ -49,6 +61,8 @@
str r2, [r1, r0, lsl #2]
restore_irqs ip
mov pc, lr
UNWIND( .fnend )
ENDPROC(\name )
.endm
/**
@ -59,7 +73,9 @@
* Note: we can trivially conditionalise the store instruction
* to avoid dirtying the data cache.
*/
.macro testop, instr, store
.macro testop, name, instr, store
ENTRY( \name )
UNWIND( .fnstart )
ands ip, r1, #3
strneb r1, [ip] @ assert word-aligned
and r3, r0, #31
@ -73,5 +89,7 @@
moveq r0, #0
restore_irqs ip
mov pc, lr
UNWIND( .fnend )
ENDPROC(\name )
.endm
#endif

View file

@ -12,6 +12,4 @@
#include "bitops.h"
.text
ENTRY(_change_bit)
bitop eor
ENDPROC(_change_bit)
bitop _change_bit, eor

View file

@ -12,6 +12,4 @@
#include "bitops.h"
.text
ENTRY(_clear_bit)
bitop bic
ENDPROC(_clear_bit)
bitop _clear_bit, bic

View file

@ -12,6 +12,4 @@
#include "bitops.h"
.text
ENTRY(_set_bit)
bitop orr
ENDPROC(_set_bit)
bitop _set_bit, orr

View file

@ -12,6 +12,4 @@
#include "bitops.h"
.text
ENTRY(_test_and_change_bit)
testop eor, str
ENDPROC(_test_and_change_bit)
testop _test_and_change_bit, eor, str

View file

@ -12,6 +12,4 @@
#include "bitops.h"
.text
ENTRY(_test_and_clear_bit)
testop bicne, strne
ENDPROC(_test_and_clear_bit)
testop _test_and_clear_bit, bicne, strne

View file

@ -12,6 +12,4 @@
#include "bitops.h"
.text
ENTRY(_test_and_set_bit)
testop orreq, streq
ENDPROC(_test_and_set_bit)
testop _test_and_set_bit, orreq, streq

View file

@ -83,7 +83,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
* USB Device (Gadget)
* -------------------------------------------------------------------- */
#ifdef CONFIG_USB_GADGET_AT91
#ifdef CONFIG_USB_AT91
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {

View file

@ -195,9 +195,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk),
CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk),
CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
/* more usart lookup table for DT entries */
CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),

View file

@ -84,7 +84,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
* USB Device (Gadget)
* -------------------------------------------------------------------- */
#ifdef CONFIG_USB_GADGET_AT91
#ifdef CONFIG_USB_AT91
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {

View file

@ -87,7 +87,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
* USB Device (Gadget)
* -------------------------------------------------------------------- */
#ifdef CONFIG_USB_GADGET_AT91
#ifdef CONFIG_USB_AT91
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {

View file

@ -92,7 +92,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
* USB Device (Gadget)
* -------------------------------------------------------------------- */
#ifdef CONFIG_USB_GADGET_AT91
#ifdef CONFIG_USB_AT91
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {

View file

@ -19,7 +19,7 @@
#define BOARD_HAVE_NAND_16BIT (1 << 31)
static inline int board_have_nand_16bit(void)
{
return system_rev & BOARD_HAVE_NAND_16BIT;
return (system_rev & BOARD_HAVE_NAND_16BIT) ? 1 : 0;
}
#endif /* __ARCH_SYSTEM_REV_H__ */

View file

@ -753,7 +753,7 @@ static struct snd_platform_data da850_evm_snd_data = {
.num_serializer = ARRAY_SIZE(da850_iis_serializer_direction),
.tdm_slots = 2,
.serial_dir = da850_iis_serializer_direction,
.asp_chan_q = EVENTQ_1,
.asp_chan_q = EVENTQ_0,
.version = MCASP_VERSION_2,
.txnumevt = 1,
.rxnumevt = 1,

View file

@ -107,7 +107,7 @@ static struct mtd_partition davinci_nand_partitions[] = {
/* UBL (a few copies) plus U-Boot */
.name = "bootloader",
.offset = 0,
.size = 28 * NAND_BLOCK_SIZE,
.size = 30 * NAND_BLOCK_SIZE,
.mask_flags = MTD_WRITEABLE, /* force read-only */
}, {
/* U-Boot environment */

View file

@ -564,7 +564,7 @@ static int setup_vpif_input_channel_mode(int mux_mode)
int val;
u32 value;
if (!vpif_vsclkdis_reg || !cpld_client)
if (!vpif_vidclkctl_reg || !cpld_client)
return -ENXIO;
val = i2c_smbus_read_byte(cpld_client);
@ -572,7 +572,7 @@ static int setup_vpif_input_channel_mode(int mux_mode)
return val;
spin_lock_irqsave(&vpif_reg_lock, flags);
value = __raw_readl(vpif_vsclkdis_reg);
value = __raw_readl(vpif_vidclkctl_reg);
if (mux_mode) {
val &= VPIF_INPUT_TWO_CHANNEL;
value |= VIDCH1CLK;
@ -580,7 +580,7 @@ static int setup_vpif_input_channel_mode(int mux_mode)
val |= VPIF_INPUT_ONE_CHANNEL;
value &= ~VIDCH1CLK;
}
__raw_writel(value, vpif_vsclkdis_reg);
__raw_writel(value, vpif_vidclkctl_reg);
spin_unlock_irqrestore(&vpif_reg_lock, flags);
err = i2c_smbus_write_byte(cpld_client, val);

View file

@ -161,7 +161,6 @@ static struct clk dsp_clk = {
.name = "dsp",
.parent = &pll1_sysclk1,
.lpsc = DM646X_LPSC_C64X_CPU,
.flags = PSC_DSP,
.usecount = 1, /* REVISIT how to disable? */
};

View file

@ -233,7 +233,7 @@
#define PTCMD 0x120
#define PTSTAT 0x128
#define PDSTAT 0x200
#define PDCTL1 0x304
#define PDCTL 0x300
#define MDSTAT 0x800
#define MDCTL 0xA00
@ -244,7 +244,10 @@
#define PSC_STATE_ENABLE 3
#define MDSTAT_STATE_MASK 0x3f
#define PDSTAT_STATE_MASK 0x1f
#define MDCTL_FORCE BIT(31)
#define PDCTL_NEXT BIT(1)
#define PDCTL_EPCGOOD BIT(8)
#ifndef __ASSEMBLER__

View file

@ -52,7 +52,7 @@ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
void davinci_psc_config(unsigned int domain, unsigned int ctlr,
unsigned int id, bool enable, u32 flags)
{
u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
u32 epcpr, ptcmd, ptstat, pdstat, pdctl, mdstat, mdctl;
void __iomem *psc_base;
struct davinci_soc_info *soc_info = &davinci_soc_info;
u32 next_state = PSC_STATE_ENABLE;
@ -79,11 +79,11 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr,
mdctl |= MDCTL_FORCE;
__raw_writel(mdctl, psc_base + MDCTL + 4 * id);
pdstat = __raw_readl(psc_base + PDSTAT);
if ((pdstat & 0x00000001) == 0) {
pdctl1 = __raw_readl(psc_base + PDCTL1);
pdctl1 |= 0x1;
__raw_writel(pdctl1, psc_base + PDCTL1);
pdstat = __raw_readl(psc_base + PDSTAT + 4 * domain);
if ((pdstat & PDSTAT_STATE_MASK) == 0) {
pdctl = __raw_readl(psc_base + PDCTL + 4 * domain);
pdctl |= PDCTL_NEXT;
__raw_writel(pdctl, psc_base + PDCTL + 4 * domain);
ptcmd = 1 << domain;
__raw_writel(ptcmd, psc_base + PTCMD);
@ -92,9 +92,9 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr,
epcpr = __raw_readl(psc_base + EPCPR);
} while ((((epcpr >> domain) & 1) == 0));
pdctl1 = __raw_readl(psc_base + PDCTL1);
pdctl1 |= 0x100;
__raw_writel(pdctl1, psc_base + PDCTL1);
pdctl = __raw_readl(psc_base + PDCTL + 4 * domain);
pdctl |= PDCTL_EPCGOOD;
__raw_writel(pdctl, psc_base + PDCTL + 4 * domain);
} else {
ptcmd = 1 << domain;
__raw_writel(ptcmd, psc_base + PTCMD);

View file

@ -12,6 +12,8 @@
#include <linux/init.h>
#include <linux/cpuidle.h>
#include <linux/io.h>
#include <linux/export.h>
#include <linux/time.h>
#include <asm/proc-fns.h>

View file

@ -44,8 +44,6 @@ struct mct_clock_event_device {
char name[10];
};
static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
static void exynos4_mct_write(unsigned int value, void *addr)
{
void __iomem *stat_addr;
@ -264,6 +262,9 @@ static void exynos4_clockevent_init(void)
}
#ifdef CONFIG_LOCAL_TIMERS
static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
/* Clock event handling */
static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt)
{
@ -428,9 +429,13 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt)
void local_timer_stop(struct clock_event_device *evt)
{
unsigned int cpu = smp_processor_id();
evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
if (mct_int_type == MCT_INT_SPI)
disable_irq(evt->irq);
if (cpu == 0)
remove_irq(evt->irq, &mct_tick0_event_irq);
else
remove_irq(evt->irq, &mct_tick1_event_irq);
else
disable_percpu_irq(IRQ_MCT_LOCALTIMER);
}
@ -443,6 +448,7 @@ static void __init exynos4_timer_resources(void)
clk_rate = clk_get_rate(mct_clk);
#ifdef CONFIG_LOCAL_TIMERS
if (mct_int_type == MCT_INT_PPI) {
int err;
@ -452,6 +458,7 @@ static void __init exynos4_timer_resources(void)
WARN(err, "MCT: can't request IRQ %d (%d)\n",
IRQ_MCT_LOCALTIMER, err);
}
#endif /* CONFIG_LOCAL_TIMERS */
}
static void __init exynos4_timer_init(void)

View file

@ -22,6 +22,7 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/of_address.h>
#include <linux/smp.h>
#include <asm/cacheflush.h>
#include <asm/unified.h>
@ -72,6 +73,9 @@ static void __init highbank_map_io(void)
void highbank_set_cpu_jump(int cpu, void *jump_addr)
{
#ifdef CONFIG_SMP
cpu = cpu_logical_map(cpu);
#endif
writel(BSYM(virt_to_phys(jump_addr)), HB_JUMP_TABLE_VIRT(cpu));
__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),

View file

@ -10,11 +10,6 @@ config HAVE_IMX_MMDC
config HAVE_IMX_SRC
bool
#
# ARCH_MX31 and ARCH_MX35 are left for compatibility
# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
# To easily distinguish good and reviewed from unreviewed usages new (and IMHO
# more sensible) names are used: SOC_IMX31 and SOC_IMX35
config ARCH_MX1
bool
@ -27,12 +22,6 @@ config ARCH_MX25
config MACH_MX27
bool
config ARCH_MX31
bool
config ARCH_MX35
bool
config SOC_IMX1
bool
select ARCH_MX1
@ -72,7 +61,6 @@ config SOC_IMX31
select CPU_V6
select IMX_HAVE_PLATFORM_MXC_RNGA
select ARCH_MXC_AUDMUX_V2
select ARCH_MX31
select MXC_AVIC
select SMP_ON_UP if SMP
@ -82,7 +70,6 @@ config SOC_IMX35
select ARCH_MXC_IOMUX_V3
select ARCH_MXC_AUDMUX_V2
select HAVE_EPIT
select ARCH_MX35
select MXC_AVIC
select SMP_ON_UP if SMP

View file

@ -1953,14 +1953,17 @@ static struct map_desc imx6q_clock_desc[] = {
imx_map_entry(MX6Q, ANATOP, MT_DEVICE),
};
void __init imx6q_clock_map_io(void)
{
iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc));
}
int __init mx6q_clocks_init(void)
{
struct device_node *np;
void __iomem *base;
int i, irq;
iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc));
/* retrieve the freqency of fixed clocks from device tree */
for_each_compatible_node(np, NULL, "fixed-clock") {
u32 rate;

View file

@ -34,16 +34,18 @@ static void __init imx6q_map_io(void)
{
imx_lluart_map_io();
imx_scu_map_io();
imx6q_clock_map_io();
}
static void __init imx6q_gpio_add_irq_domain(struct device_node *np,
static int __init imx6q_gpio_add_irq_domain(struct device_node *np,
struct device_node *interrupt_parent)
{
static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
32 * 7; /* imx6q gets 7 gpio ports */
static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
gpio_irq_base -= 32;
irq_domain_add_simple(np, gpio_irq_base);
gpio_irq_base += 32;
return 0;
}
static const struct of_device_id imx6q_irq_match[] __initconst = {

View file

@ -33,29 +33,32 @@
static void imx3_idle(void)
{
unsigned long reg = 0;
__asm__ __volatile__(
/* disable I and D cache */
"mrc p15, 0, %0, c1, c0, 0\n"
"bic %0, %0, #0x00001000\n"
"bic %0, %0, #0x00000004\n"
"mcr p15, 0, %0, c1, c0, 0\n"
/* invalidate I cache */
"mov %0, #0\n"
"mcr p15, 0, %0, c7, c5, 0\n"
/* clear and invalidate D cache */
"mov %0, #0\n"
"mcr p15, 0, %0, c7, c14, 0\n"
/* WFI */
"mov %0, #0\n"
"mcr p15, 0, %0, c7, c0, 4\n"
"nop\n" "nop\n" "nop\n" "nop\n"
"nop\n" "nop\n" "nop\n"
/* enable I and D cache */
"mrc p15, 0, %0, c1, c0, 0\n"
"orr %0, %0, #0x00001000\n"
"orr %0, %0, #0x00000004\n"
"mcr p15, 0, %0, c1, c0, 0\n"
: "=r" (reg));
if (!need_resched())
__asm__ __volatile__(
/* disable I and D cache */
"mrc p15, 0, %0, c1, c0, 0\n"
"bic %0, %0, #0x00001000\n"
"bic %0, %0, #0x00000004\n"
"mcr p15, 0, %0, c1, c0, 0\n"
/* invalidate I cache */
"mov %0, #0\n"
"mcr p15, 0, %0, c7, c5, 0\n"
/* clear and invalidate D cache */
"mov %0, #0\n"
"mcr p15, 0, %0, c7, c14, 0\n"
/* WFI */
"mov %0, #0\n"
"mcr p15, 0, %0, c7, c0, 4\n"
"nop\n" "nop\n" "nop\n" "nop\n"
"nop\n" "nop\n" "nop\n"
/* enable I and D cache */
"mrc p15, 0, %0, c1, c0, 0\n"
"orr %0, %0, #0x00001000\n"
"orr %0, %0, #0x00000004\n"
"mcr p15, 0, %0, c1, c0, 0\n"
: "=r" (reg));
local_irq_enable();
}
static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size,
@ -108,6 +111,7 @@ void imx3_init_l2x0(void)
l2x0_init(l2x0_base, 0x00030024, 0x00000000);
}
#ifdef CONFIG_SOC_IMX31
static struct map_desc mx31_io_desc[] __initdata = {
imx_map_entry(MX31, X_MEMC, MT_DEVICE),
imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
@ -126,33 +130,11 @@ void __init mx31_map_io(void)
iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
}
static struct map_desc mx35_io_desc[] __initdata = {
imx_map_entry(MX35, X_MEMC, MT_DEVICE),
imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
};
void __init mx35_map_io(void)
{
iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
}
void __init imx31_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX31);
mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
imx_idle = imx3_idle;
imx_ioremap = imx3_ioremap;
}
void __init imx35_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX35);
mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
imx_idle = imx3_idle;
pm_idle = imx3_idle;
imx_ioremap = imx3_ioremap;
}
@ -161,11 +143,6 @@ void __init mx31_init_irq(void)
mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
}
void __init mx35_init_irq(void)
{
mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
}
static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
.per_2_per_addr = 1677,
};
@ -199,6 +176,35 @@ void __init imx31_soc_init(void)
imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
}
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
static struct map_desc mx35_io_desc[] __initdata = {
imx_map_entry(MX35, X_MEMC, MT_DEVICE),
imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
};
void __init mx35_map_io(void)
{
iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
}
void __init imx35_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX35);
mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
pm_idle = imx3_idle;
imx_ioremap = imx3_ioremap;
}
void __init mx35_init_irq(void)
{
mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
}
static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
.ap_2_ap_addr = 642,
@ -254,3 +260,4 @@ void __init imx35_soc_init(void)
imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
}
#endif /* ifdef CONFIG_SOC_IMX35 */

View file

@ -14,6 +14,7 @@
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/smp.h>
#include <asm/unified.h>
#define SRC_SCR 0x000
@ -23,10 +24,15 @@
static void __iomem *src_base;
#ifndef CONFIG_SMP
#define cpu_logical_map(cpu) 0
#endif
void imx_enable_cpu(int cpu, bool enable)
{
u32 mask, val;
cpu = cpu_logical_map(cpu);
mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
val = readl_relaxed(src_base + SRC_SCR);
val = enable ? val | mask : val & ~mask;
@ -35,6 +41,7 @@ void imx_enable_cpu(int cpu, bool enable)
void imx_set_cpu_jump(int cpu, void *jump_addr)
{
cpu = cpu_logical_map(cpu);
writel_relaxed(BSYM(virt_to_phys(jump_addr)),
src_base + SRC_GPR1 + cpu * 8);
}

View file

@ -182,7 +182,7 @@ static void __init gplugd_init(void)
/* on-chip devices */
pxa168_add_uart(3);
pxa168_add_ssp(0);
pxa168_add_ssp(1);
pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
pxa168_add_eth(&gplugd_eth_platform_data);

View file

@ -7,7 +7,7 @@
#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000)
#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
#define GPIO_REG(x) (GPIO_REGS_VIRT + (x))
#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
#define NR_BUILTIN_GPIO IRQ_GPIO_NUM

View file

@ -18,6 +18,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/bootmem.h>
#include <linux/module.h>
#include <mach/irqs.h>
#include <mach/iommu.h>

View file

@ -362,7 +362,7 @@ static void __init mx51_babbage_init(void)
{
iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21,
PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH);
imx51_soc_init();

View file

@ -106,7 +106,7 @@ static inline void mx53_evk_fec_reset(void)
gpio_set_value(MX53_EVK_FEC_PHY_RST, 1);
}
static struct fec_platform_data mx53_evk_fec_pdata = {
static const struct fec_platform_data mx53_evk_fec_pdata __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};

View file

@ -242,7 +242,7 @@ static inline void mx53_loco_fec_reset(void)
gpio_set_value(LOCO_FEC_PHY_RST, 1);
}
static struct fec_platform_data mx53_loco_fec_data = {
static const struct fec_platform_data mx53_loco_fec_data __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};

View file

@ -104,7 +104,7 @@ static inline void mx53_smd_fec_reset(void)
gpio_set_value(SMD_FEC_PHY_RST, 1);
}
static struct fec_platform_data mx53_smd_fec_data = {
static const struct fec_platform_data mx53_smd_fec_data __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};

View file

@ -16,7 +16,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <mach/hardware.h>
#include <asm/io.h>
#include <linux/io.h>
static int mx5_cpu_rev = -1;
@ -67,7 +67,8 @@ static int __init mx51_neon_fixup(void)
if (!cpu_is_mx51())
return 0;
if (mx51_revision() < IMX_CHIP_REVISION_3_0 && (elf_hwcap & HWCAP_NEON)) {
if (mx51_revision() < IMX_CHIP_REVISION_3_0 &&
(elf_hwcap & HWCAP_NEON)) {
elf_hwcap &= ~HWCAP_NEON;
pr_info("Turning off NEON support, detected broken NEON implementation\n");
}

View file

@ -44,20 +44,22 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
{ /* sentinel */ }
};
static void __init imx51_tzic_add_irq_domain(struct device_node *np,
static int __init imx51_tzic_add_irq_domain(struct device_node *np,
struct device_node *interrupt_parent)
{
irq_domain_add_simple(np, 0);
return 0;
}
static void __init imx51_gpio_add_irq_domain(struct device_node *np,
static int __init imx51_gpio_add_irq_domain(struct device_node *np,
struct device_node *interrupt_parent)
{
static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
32 * 4; /* imx51 gets 4 gpio ports */
static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
gpio_irq_base -= 32;
irq_domain_add_simple(np, gpio_irq_base);
gpio_irq_base += 32;
return 0;
}
static const struct of_device_id imx51_irq_match[] __initconst = {

View file

@ -48,20 +48,22 @@ static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = {
{ /* sentinel */ }
};
static void __init imx53_tzic_add_irq_domain(struct device_node *np,
static int __init imx53_tzic_add_irq_domain(struct device_node *np,
struct device_node *interrupt_parent)
{
irq_domain_add_simple(np, 0);
return 0;
}
static void __init imx53_gpio_add_irq_domain(struct device_node *np,
static int __init imx53_gpio_add_irq_domain(struct device_node *np,
struct device_node *interrupt_parent)
{
static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
32 * 7; /* imx53 gets 7 gpio ports */
static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
gpio_irq_base -= 32;
irq_domain_add_simple(np, gpio_irq_base);
gpio_irq_base += 32;
return 0;
}
static const struct of_device_id imx53_irq_match[] __initconst = {

View file

@ -23,7 +23,9 @@
static void imx5_idle(void)
{
mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
if (!need_resched())
mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
local_irq_enable();
}
/*
@ -89,7 +91,7 @@ void __init imx51_init_early(void)
mxc_set_cpu_type(MXC_CPU_MX51);
mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
imx_idle = imx5_idle;
pm_idle = imx5_idle;
}
void __init imx53_init_early(void)

View file

@ -404,7 +404,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \
reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \
reg &= ~BM_CLKCTRL_##dr##_DIV; \
reg |= div << BP_CLKCTRL_##dr##_DIV; \
if (reg | (1 << clk->enable_shift)) { \
if (reg & (1 << clk->enable_shift)) { \
pr_err("%s: clock is gated\n", __func__); \
return -EINVAL; \
} \

View file

@ -104,8 +104,8 @@
#define MX28_INT_CAN1 9
#define MX28_INT_LRADC_TOUCH 10
#define MX28_INT_HSADC 13
#define MX28_INT_IRADC_THRESH0 14
#define MX28_INT_IRADC_THRESH1 15
#define MX28_INT_LRADC_THRESH0 14
#define MX28_INT_LRADC_THRESH1 15
#define MX28_INT_LRADC_CH0 16
#define MX28_INT_LRADC_CH1 17
#define MX28_INT_LRADC_CH2 18

View file

@ -30,6 +30,7 @@
*/
#define cpu_is_mx23() ( \
machine_is_mx23evk() || \
machine_is_stmp378x() || \
0)
#define cpu_is_mx28() ( \
machine_is_mx28evk() || \

View file

@ -361,6 +361,6 @@ static struct sys_timer m28evk_timer = {
MACHINE_START(M28EVK, "DENX M28 EVK")
.map_io = mx28_map_io,
.init_irq = mx28_init_irq,
.init_machine = m28evk_init,
.timer = &m28evk_timer,
.init_machine = m28evk_init,
MACHINE_END

View file

@ -115,6 +115,6 @@ static struct sys_timer stmp378x_dvb_timer = {
MACHINE_START(STMP378X, "STMP378X")
.map_io = mx23_map_io,
.init_irq = mx23_init_irq,
.init_machine = stmp378x_dvb_init,
.timer = &stmp378x_dvb_timer,
.init_machine = stmp378x_dvb_init,
MACHINE_END

View file

@ -66,11 +66,11 @@ static const iomux_cfg_t tx28_fec1_pads[] __initconst = {
MX28_PAD_ENET0_CRS__ENET1_RX_EN,
};
static struct fec_platform_data tx28_fec0_data = {
static const struct fec_platform_data tx28_fec0_data __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};
static struct fec_platform_data tx28_fec1_data = {
static const struct fec_platform_data tx28_fec1_data __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};

View file

@ -171,14 +171,6 @@ config MACH_OMAP_GENERIC
comment "OMAP CPU Speed"
depends on ARCH_OMAP1
config OMAP_CLOCKS_SET_BY_BOOTLOADER
bool "OMAP clocks set by bootloader"
depends on ARCH_OMAP1
help
Enable this option to prevent the kernel from overriding the clock
frequencies programmed by bootloader for MPU, DSP, MMUs, TC,
internal LCD controller and MPU peripherals.
config OMAP_ARM_216MHZ
bool "OMAP ARM 216 MHz CPU (1710 only)"
depends on ARCH_OMAP1 && ARCH_OMAP16XX

View file

@ -302,8 +302,6 @@ static void __init ams_delta_init(void)
omap_cfg_reg(J19_1610_CAM_D6);
omap_cfg_reg(J18_1610_CAM_D7);
iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
omap_board_config = ams_delta_config;
omap_board_config_size = ARRAY_SIZE(ams_delta_config);
omap_serial_init();
@ -373,10 +371,16 @@ static int __init ams_delta_modem_init(void)
}
arch_initcall(ams_delta_modem_init);
static void __init ams_delta_map_io(void)
{
omap15xx_map_io();
iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
}
MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
/* Maintainer: Jonathan McDowell <noodles@earth.li> */
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.map_io = ams_delta_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,

View file

@ -17,7 +17,8 @@
#include <plat/clock.h>
extern int __init omap1_clk_init(void);
int omap1_clk_init(void);
void omap1_clk_late_init(void);
extern int omap1_clk_enable(struct clk *clk);
extern void omap1_clk_disable(struct clk *clk);
extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate);

View file

@ -16,6 +16,8 @@
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/cpufreq.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <asm/mach-types.h> /* for machine_is_* */
@ -767,6 +769,15 @@ static struct clk_functions omap1_clk_functions = {
.clk_disable_unused = omap1_clk_disable_unused,
};
static void __init omap1_show_rates(void)
{
pr_notice("Clocking rate (xtal/DPLL1/MPU): "
"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
}
int __init omap1_clk_init(void)
{
struct omap_clk *c;
@ -835,9 +846,12 @@ int __init omap1_clk_init(void)
/* We want to be in syncronous scalable mode */
omap_writew(0x1000, ARM_SYSST);
#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER
/* Use values set by bootloader. Determine PLL rate and recalculate
* dependent clocks as if kernel had changed PLL or divisors.
/*
* Initially use the values set by bootloader. Determine PLL rate and
* recalculate dependent clocks as if kernel had changed PLL or
* divisors. See also omap1_clk_late_init() that can reprogram dpll1
* after the SRAM is initialized.
*/
{
unsigned pll_ctl_val = omap_readw(DPLL_CTL);
@ -862,25 +876,10 @@ int __init omap1_clk_init(void)
}
}
}
#else
/* Find the highest supported frequency and enable it */
if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
printk(KERN_ERR "System frequencies not set. Check your config.\n");
/* Guess sane values (60MHz) */
omap_writew(0x2290, DPLL_CTL);
omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
ck_dpll1.rate = 60000000;
}
#endif
propagate_rate(&ck_dpll1);
/* Cache rates for clocks connected to ck_ref (not dpll1) */
propagate_rate(&ck_ref);
printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
omap1_show_rates();
if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
/* Select slicer output as OMAP input clock */
omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1,
@ -925,3 +924,27 @@ int __init omap1_clk_init(void)
return 0;
}
#define OMAP1_DPLL1_SANE_VALUE 60000000
void __init omap1_clk_late_init(void)
{
unsigned long rate = ck_dpll1.rate;
if (rate >= OMAP1_DPLL1_SANE_VALUE)
return;
/* System booting at unusable rate, force reprogramming of DPLL1 */
ck_dpll1_p->rate = 0;
/* Find the highest supported frequency and enable it */
if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
pr_err("System frequencies not set, using default. Check your config.\n");
omap_writew(0x2290, DPLL_CTL);
omap_writew(cpu_is_omap7xx() ? 0x2005 : 0x0005, ARM_CKCTL);
ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE;
}
propagate_rate(&ck_dpll1);
omap1_show_rates();
loops_per_jiffy = cpufreq_scale(loops_per_jiffy, rate, ck_dpll1.rate);
}

View file

@ -30,6 +30,8 @@
#include <plat/omap7xx.h>
#include <plat/mcbsp.h>
#include "clock.h"
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
@ -293,6 +295,7 @@ static int __init omap1_init_devices(void)
return -ENODEV;
omap_sram_init();
omap1_clk_late_init();
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.

View file

@ -334,6 +334,7 @@ config MACH_OMAP4_PANDA
config OMAP3_EMU
bool "OMAP3 debugging peripherals"
depends on ARCH_OMAP3
select ARM_AMBA
select OC_ETM
help
Say Y here to enable debugging hardware of omap3

View file

@ -4,7 +4,7 @@
# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
common.o gpio.o dma.o wd_timer.o
common.o gpio.o dma.o wd_timer.o display.o
omap-2-3-common = irq.o sdrc.o
hwmod-common = omap_hwmod.o \
@ -264,7 +264,4 @@ smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o
obj-y += $(smsc911x-m) $(smsc911x-y)
obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o
disp-$(CONFIG_OMAP2_DSS) := display.o
obj-y += $(disp-m) $(disp-y)
obj-y += common-board-devices.o twl-common.o

View file

@ -193,7 +193,7 @@ static struct platform_device rx51_charger_device = {
static void __init rx51_charger_init(void)
{
WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO,
GPIOF_OUT_INIT_LOW, "isp1704_reset"));
GPIOF_OUT_INIT_HIGH, "isp1704_reset"));
platform_device_register(&rx51_charger_device);
}

View file

@ -24,6 +24,7 @@
#include <linux/sched.h>
#include <linux/cpuidle.h>
#include <linux/export.h>
#include <plat/prcm.h>
#include <plat/irqs.h>

View file

@ -27,8 +27,35 @@
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
#include <plat/omap-pm.h>
#include <plat/common.h>
#include "control.h"
#include "display.h"
#define DISPC_CONTROL 0x0040
#define DISPC_CONTROL2 0x0238
#define DISPC_IRQSTATUS 0x0018
#define DSS_SYSCONFIG 0x10
#define DSS_SYSSTATUS 0x14
#define DSS_CONTROL 0x40
#define DSS_SDI_CONTROL 0x44
#define DSS_PLL_CONTROL 0x48
#define LCD_EN_MASK (0x1 << 0)
#define DIGIT_EN_MASK (0x1 << 1)
#define FRAMEDONE_IRQ_SHIFT 0
#define EVSYNC_EVEN_IRQ_SHIFT 2
#define EVSYNC_ODD_IRQ_SHIFT 3
#define FRAMEDONE2_IRQ_SHIFT 22
#define FRAMEDONETV_IRQ_SHIFT 24
/*
* FRAMEDONE_IRQ_TIMEOUT: how long (in milliseconds) to wait during DISPC
* reset before deciding that something has gone wrong
*/
#define FRAMEDONE_IRQ_TIMEOUT 100
static struct platform_device omap_display_device = {
.name = "omapdss",
@ -172,3 +199,135 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
return r;
}
static void dispc_disable_outputs(void)
{
u32 v, irq_mask = 0;
bool lcd_en, digit_en, lcd2_en = false;
int i;
struct omap_dss_dispc_dev_attr *da;
struct omap_hwmod *oh;
oh = omap_hwmod_lookup("dss_dispc");
if (!oh) {
WARN(1, "display: could not disable outputs during reset - could not find dss_dispc hwmod\n");
return;
}
if (!oh->dev_attr) {
pr_err("display: could not disable outputs during reset due to missing dev_attr\n");
return;
}
da = (struct omap_dss_dispc_dev_attr *)oh->dev_attr;
/* store value of LCDENABLE and DIGITENABLE bits */
v = omap_hwmod_read(oh, DISPC_CONTROL);
lcd_en = v & LCD_EN_MASK;
digit_en = v & DIGIT_EN_MASK;
/* store value of LCDENABLE for LCD2 */
if (da->manager_count > 2) {
v = omap_hwmod_read(oh, DISPC_CONTROL2);
lcd2_en = v & LCD_EN_MASK;
}
if (!(lcd_en | digit_en | lcd2_en))
return; /* no managers currently enabled */
/*
* If any manager was enabled, we need to disable it before
* DSS clocks are disabled or DISPC module is reset
*/
if (lcd_en)
irq_mask |= 1 << FRAMEDONE_IRQ_SHIFT;
if (digit_en) {
if (da->has_framedonetv_irq) {
irq_mask |= 1 << FRAMEDONETV_IRQ_SHIFT;
} else {
irq_mask |= 1 << EVSYNC_EVEN_IRQ_SHIFT |
1 << EVSYNC_ODD_IRQ_SHIFT;
}
}
if (lcd2_en)
irq_mask |= 1 << FRAMEDONE2_IRQ_SHIFT;
/*
* clear any previous FRAMEDONE, FRAMEDONETV,
* EVSYNC_EVEN/ODD or FRAMEDONE2 interrupts
*/
omap_hwmod_write(irq_mask, oh, DISPC_IRQSTATUS);
/* disable LCD and TV managers */
v = omap_hwmod_read(oh, DISPC_CONTROL);
v &= ~(LCD_EN_MASK | DIGIT_EN_MASK);
omap_hwmod_write(v, oh, DISPC_CONTROL);
/* disable LCD2 manager */
if (da->manager_count > 2) {
v = omap_hwmod_read(oh, DISPC_CONTROL2);
v &= ~LCD_EN_MASK;
omap_hwmod_write(v, oh, DISPC_CONTROL2);
}
i = 0;
while ((omap_hwmod_read(oh, DISPC_IRQSTATUS) & irq_mask) !=
irq_mask) {
i++;
if (i > FRAMEDONE_IRQ_TIMEOUT) {
pr_err("didn't get FRAMEDONE1/2 or TV interrupt\n");
break;
}
mdelay(1);
}
}
#define MAX_MODULE_SOFTRESET_WAIT 10000
int omap_dss_reset(struct omap_hwmod *oh)
{
struct omap_hwmod_opt_clk *oc;
int c = 0;
int i, r;
if (!(oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)) {
pr_err("dss_core: hwmod data doesn't contain reset data\n");
return -EINVAL;
}
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
if (oc->_clk)
clk_enable(oc->_clk);
dispc_disable_outputs();
/* clear SDI registers */
if (cpu_is_omap3430()) {
omap_hwmod_write(0x0, oh, DSS_SDI_CONTROL);
omap_hwmod_write(0x0, oh, DSS_PLL_CONTROL);
}
/*
* clear DSS_CONTROL register to switch DSS clock sources to
* PRCM clock, if any
*/
omap_hwmod_write(0x0, oh, DSS_CONTROL);
omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs)
& SYSS_RESETDONE_MASK),
MAX_MODULE_SOFTRESET_WAIT, c);
if (c == MAX_MODULE_SOFTRESET_WAIT)
pr_warning("dss_core: waiting for reset to finish failed\n");
else
pr_debug("dss_core: softreset done\n");
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
if (oc->_clk)
clk_disable(oc->_clk);
r = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0;
return r;
}

View file

@ -0,0 +1,29 @@
/*
* display.h - OMAP2+ integration-specific DSS header
*
* Copyright (C) 2011 Texas Instruments, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __ARCH_ARM_MACH_OMAP2_DISPLAY_H
#define __ARCH_ARM_MACH_OMAP2_DISPLAY_H
#include <linux/kernel.h>
struct omap_dss_dispc_dev_attr {
u8 manager_count;
bool has_framedonetv_irq;
};
#endif

View file

@ -145,6 +145,9 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
pdata->reg_size = 4;
pdata->has_ccr = true;
}
pdata->set_clk_src = omap2_mcbsp_set_clk_src;
if (id == 1)
pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
if (oh->class->rev == MCBSP_CONFIG_TYPE3) {
if (id == 2)
@ -174,9 +177,6 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
name, oh->name);
return PTR_ERR(pdev);
}
pdata->set_clk_src = omap2_mcbsp_set_clk_src;
if (id == 1)
pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
omap_mcbsp_count++;
return 0;
}

View file

@ -749,7 +749,7 @@ static int _count_mpu_irqs(struct omap_hwmod *oh)
ohii = &oh->mpu_irqs[i++];
} while (ohii->irq != -1);
return i;
return i-1;
}
/**
@ -772,7 +772,7 @@ static int _count_sdma_reqs(struct omap_hwmod *oh)
ohdi = &oh->sdma_reqs[i++];
} while (ohdi->dma_req != -1);
return i;
return i-1;
}
/**
@ -795,7 +795,7 @@ static int _count_ocp_if_addr_spaces(struct omap_hwmod_ocp_if *os)
mem = &os->addr[i++];
} while (mem->pa_start != mem->pa_end);
return i;
return i-1;
}
/**

Some files were not shown because too many files have changed in this diff Show more