w1: Add 1-wire slave device driver for DS28E04-100
This patch adds a 1-wire slave device driver for the DS28E04-100. Signed-off-by: Markus Franke <franm@hrz.tu-chemnitz.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Markus Franke
Greg Kroah-Hartman
parent
ecf1948985
commit
f19420c1ac
4 changed files with 471 additions and 0 deletions
|
|
@ -94,6 +94,13 @@ config W1_SLAVE_DS2781
|
|||
|
||||
If you are unsure, say N.
|
||||
|
||||
config W1_SLAVE_DS28E04
|
||||
tristate "4096-Bit Addressable 1-Wire EEPROM with PIO (DS28E04-100)"
|
||||
depends on W1
|
||||
help
|
||||
Say Y here if you want to use a 1-wire
|
||||
4kb EEPROM with PIO family device (DS28E04).
|
||||
|
||||
config W1_SLAVE_BQ27000
|
||||
tristate "BQ27000 slave support"
|
||||
depends on W1
|
||||
|
|
|
|||
|
|
@ -12,3 +12,4 @@ obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o
|
|||
obj-$(CONFIG_W1_SLAVE_DS2780) += w1_ds2780.o
|
||||
obj-$(CONFIG_W1_SLAVE_DS2781) += w1_ds2781.o
|
||||
obj-$(CONFIG_W1_SLAVE_BQ27000) += w1_bq27000.o
|
||||
obj-$(CONFIG_W1_SLAVE_DS28E04) += w1_ds28e04.o
|
||||
|
|
|
|||
462
drivers/w1/slaves/w1_ds28e04.c
Normal file
462
drivers/w1/slaves/w1_ds28e04.c
Normal file
|
|
@ -0,0 +1,462 @@
|
|||
/*
|
||||
* w1_ds28e04.c - w1 family 1C (DS28E04) driver
|
||||
*
|
||||
* Copyright (c) 2012 Markus Franke <franke.m@sebakmt.com>
|
||||
*
|
||||
* This source code is licensed under the GNU General Public License,
|
||||
* Version 2. See the file COPYING for more details.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/moduleparam.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/crc16.h>
|
||||
#include <linux/uaccess.h>
|
||||
|
||||
#define CRC16_INIT 0
|
||||
#define CRC16_VALID 0xb001
|
||||
|
||||
#include "../w1.h"
|
||||
#include "../w1_int.h"
|
||||
#include "../w1_family.h"
|
||||
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_AUTHOR("Markus Franke <franke.m@sebakmt.com>, <franm@hrz.tu-chemnitz.de>");
|
||||
MODULE_DESCRIPTION("w1 family 1C driver for DS28E04, 4kb EEPROM and PIO");
|
||||
|
||||
/* Allow the strong pullup to be disabled, but default to enabled.
|
||||
* If it was disabled a parasite powered device might not get the required
|
||||
* current to copy the data from the scratchpad to EEPROM. If it is enabled parasite powered
|
||||
* devices have a better chance of getting the current required.
|
||||
*/
|
||||
static int w1_strong_pullup = 1;
|
||||
module_param_named(strong_pullup, w1_strong_pullup, int, 0);
|
||||
|
||||
/* enable/disable CRC checking on DS28E04-100 memory accesses */
|
||||
static char w1_enable_crccheck = 1;
|
||||
|
||||
#define W1_EEPROM_SIZE 512
|
||||
#define W1_PAGE_COUNT 16
|
||||
#define W1_PAGE_SIZE 32
|
||||
#define W1_PAGE_BITS 5
|
||||
#define W1_PAGE_MASK 0x1F
|
||||
|
||||
#define W1_F1C_READ_EEPROM 0xF0
|
||||
#define W1_F1C_WRITE_SCRATCH 0x0F
|
||||
#define W1_F1C_READ_SCRATCH 0xAA
|
||||
#define W1_F1C_COPY_SCRATCH 0x55
|
||||
#define W1_F1C_ACCESS_WRITE 0x5A
|
||||
|
||||
#define W1_1C_REG_LOGIC_STATE 0x220
|
||||
|
||||
struct w1_f1C_data {
|
||||
u8 memory[W1_EEPROM_SIZE];
|
||||
u32 validcrc;
|
||||
};
|
||||
|
||||
/**
|
||||
* Check the file size bounds and adjusts count as needed.
|
||||
* This would not be needed if the file size didn't reset to 0 after a write.
|
||||
*/
|
||||
static inline size_t w1_f1C_fix_count(loff_t off, size_t count, size_t size)
|
||||
{
|
||||
if (off > size)
|
||||
return 0;
|
||||
|
||||
if ((off + count) > size)
|
||||
return (size - off);
|
||||
|
||||
return count;
|
||||
}
|
||||
|
||||
static int w1_f1C_refresh_block(struct w1_slave *sl, struct w1_f1C_data *data,
|
||||
int block)
|
||||
{
|
||||
u8 wrbuf[3];
|
||||
int off = block * W1_PAGE_SIZE;
|
||||
|
||||
if (data->validcrc & (1 << block))
|
||||
return 0;
|
||||
|
||||
if (w1_reset_select_slave(sl)) {
|
||||
data->validcrc = 0;
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
wrbuf[0] = W1_F1C_READ_EEPROM;
|
||||
wrbuf[1] = off & 0xff;
|
||||
wrbuf[2] = off >> 8;
|
||||
w1_write_block(sl->master, wrbuf, 3);
|
||||
w1_read_block(sl->master, &data->memory[off], W1_PAGE_SIZE);
|
||||
|
||||
/* cache the block if the CRC is valid */
|
||||
if (crc16(CRC16_INIT, &data->memory[off], W1_PAGE_SIZE) == CRC16_VALID)
|
||||
data->validcrc |= (1 << block);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int w1_f1C_read(struct w1_slave *sl, int addr, int len, char *data)
|
||||
{
|
||||
u8 wrbuf[3];
|
||||
|
||||
/* read directly from the EEPROM */
|
||||
if (w1_reset_select_slave(sl))
|
||||
return -EIO;
|
||||
|
||||
wrbuf[0] = W1_F1C_READ_EEPROM;
|
||||
wrbuf[1] = addr & 0xff;
|
||||
wrbuf[2] = addr >> 8;
|
||||
|
||||
w1_write_block(sl->master, wrbuf, sizeof(wrbuf));
|
||||
return w1_read_block(sl->master, data, len);
|
||||
}
|
||||
|
||||
static ssize_t w1_f1C_read_bin(struct file *filp, struct kobject *kobj,
|
||||
struct bin_attribute *bin_attr,
|
||||
char *buf, loff_t off, size_t count)
|
||||
{
|
||||
struct w1_slave *sl = kobj_to_w1_slave(kobj);
|
||||
struct w1_f1C_data *data = sl->family_data;
|
||||
int i, min_page, max_page;
|
||||
|
||||
if ((count = w1_f1C_fix_count(off, count, W1_EEPROM_SIZE)) == 0)
|
||||
return 0;
|
||||
|
||||
mutex_lock(&sl->master->mutex);
|
||||
|
||||
if(w1_enable_crccheck) {
|
||||
min_page = (off >> W1_PAGE_BITS);
|
||||
max_page = (off + count - 1) >> W1_PAGE_BITS;
|
||||
for (i = min_page; i <= max_page; i++) {
|
||||
if (w1_f1C_refresh_block(sl, data, i)) {
|
||||
count = -EIO;
|
||||
goto out_up;
|
||||
}
|
||||
}
|
||||
memcpy(buf, &data->memory[off], count);
|
||||
}
|
||||
else {
|
||||
count = w1_f1C_read(sl, off, count, buf);
|
||||
}
|
||||
|
||||
out_up:
|
||||
mutex_unlock(&sl->master->mutex);
|
||||
|
||||
return count;
|
||||
}
|
||||
|
||||
/**
|
||||
* Writes to the scratchpad and reads it back for verification.
|
||||
* Then copies the scratchpad to EEPROM.
|
||||
* The data must be on one page.
|
||||
* The master must be locked.
|
||||
*
|
||||
* @param sl The slave structure
|
||||
* @param addr Address for the write
|
||||
* @param len length must be <= (W1_PAGE_SIZE - (addr & W1_PAGE_MASK))
|
||||
* @param data The data to write
|
||||
* @return 0=Success -1=failure
|
||||
*/
|
||||
static int w1_f1C_write(struct w1_slave *sl, int addr, int len, const u8 *data)
|
||||
{
|
||||
u8 wrbuf[4];
|
||||
u8 rdbuf[W1_PAGE_SIZE + 3];
|
||||
u8 es = (addr + len - 1) & 0x1f;
|
||||
unsigned int tm = 10;
|
||||
int i;
|
||||
struct w1_f1C_data *f1C = sl->family_data;
|
||||
|
||||
/* Write the data to the scratchpad */
|
||||
if (w1_reset_select_slave(sl))
|
||||
return -1;
|
||||
|
||||
wrbuf[0] = W1_F1C_WRITE_SCRATCH;
|
||||
wrbuf[1] = addr & 0xff;
|
||||
wrbuf[2] = addr >> 8;
|
||||
|
||||
w1_write_block(sl->master, wrbuf, 3);
|
||||
w1_write_block(sl->master, data, len);
|
||||
|
||||
/* Read the scratchpad and verify */
|
||||
if (w1_reset_select_slave(sl))
|
||||
return -1;
|
||||
|
||||
w1_write_8(sl->master, W1_F1C_READ_SCRATCH);
|
||||
w1_read_block(sl->master, rdbuf, len + 3);
|
||||
|
||||
/* Compare what was read against the data written */
|
||||
if ((rdbuf[0] != wrbuf[1]) || (rdbuf[1] != wrbuf[2]) ||
|
||||
(rdbuf[2] != es) || (memcmp(data, &rdbuf[3], len) != 0))
|
||||
return -1;
|
||||
|
||||
/* Copy the scratchpad to EEPROM */
|
||||
if (w1_reset_select_slave(sl))
|
||||
return -1;
|
||||
|
||||
wrbuf[0] = W1_F1C_COPY_SCRATCH;
|
||||
wrbuf[3] = es;
|
||||
|
||||
for(i = 0; i < sizeof(wrbuf); ++i) {
|
||||
/* issue 10ms strong pullup (or delay) on the last byte for writing the data from the scratchpad to EEPROM */
|
||||
if(w1_strong_pullup && i == sizeof(wrbuf)-1)
|
||||
w1_next_pullup(sl->master, tm);
|
||||
|
||||
w1_write_8(sl->master, wrbuf[i]);
|
||||
}
|
||||
|
||||
if(!w1_strong_pullup)
|
||||
msleep(tm);
|
||||
|
||||
if(w1_enable_crccheck) {
|
||||
/* invalidate cached data */
|
||||
f1C->validcrc &= ~(1 << (addr >> W1_PAGE_BITS));
|
||||
}
|
||||
|
||||
/* Reset the bus to wake up the EEPROM (this may not be needed) */
|
||||
w1_reset_bus(sl->master);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static ssize_t w1_f1C_write_bin(struct file *filp, struct kobject *kobj,
|
||||
struct bin_attribute *bin_attr,
|
||||
char *buf, loff_t off, size_t count)
|
||||
|
||||
{
|
||||
struct w1_slave *sl = kobj_to_w1_slave(kobj);
|
||||
int addr, len, idx;
|
||||
|
||||
if ((count = w1_f1C_fix_count(off, count, W1_EEPROM_SIZE)) == 0)
|
||||
return 0;
|
||||
|
||||
if(w1_enable_crccheck) {
|
||||
/* can only write full blocks in cached mode */
|
||||
if ((off & W1_PAGE_MASK) || (count & W1_PAGE_MASK)) {
|
||||
dev_err(&sl->dev, "invalid offset/count off=%d cnt=%zd\n",
|
||||
(int)off, count);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* make sure the block CRCs are valid */
|
||||
for (idx = 0; idx < count; idx += W1_PAGE_SIZE) {
|
||||
if (crc16(CRC16_INIT, &buf[idx], W1_PAGE_SIZE) != CRC16_VALID) {
|
||||
dev_err(&sl->dev, "bad CRC at offset %d\n", (int)off);
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
mutex_lock(&sl->master->mutex);
|
||||
|
||||
/* Can only write data to one page at a time */
|
||||
idx = 0;
|
||||
while (idx < count) {
|
||||
addr = off + idx;
|
||||
len = W1_PAGE_SIZE - (addr & W1_PAGE_MASK);
|
||||
if (len > (count - idx))
|
||||
len = count - idx;
|
||||
|
||||
if (w1_f1C_write(sl, addr, len, &buf[idx]) < 0) {
|
||||
count = -EIO;
|
||||
goto out_up;
|
||||
}
|
||||
idx += len;
|
||||
}
|
||||
|
||||
out_up:
|
||||
mutex_unlock(&sl->master->mutex);
|
||||
|
||||
return count;
|
||||
}
|
||||
|
||||
static ssize_t w1_f1C_read_pio(struct file *filp, struct kobject *kobj,
|
||||
struct bin_attribute *bin_attr,
|
||||
char *buf, loff_t off, size_t count)
|
||||
|
||||
{
|
||||
struct w1_slave *sl = kobj_to_w1_slave(kobj);
|
||||
int ret;
|
||||
|
||||
/* check arguments */
|
||||
if(off != 0 || count != 1 || buf == NULL)
|
||||
return -EINVAL;
|
||||
|
||||
mutex_lock(&sl->master->mutex);
|
||||
ret = w1_f1C_read(sl, W1_1C_REG_LOGIC_STATE, count, buf);
|
||||
mutex_unlock(&sl->master->mutex);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static ssize_t w1_f1C_write_pio(struct file *filp, struct kobject *kobj,
|
||||
struct bin_attribute *bin_attr,
|
||||
char *buf, loff_t off, size_t count)
|
||||
|
||||
{
|
||||
struct w1_slave *sl = kobj_to_w1_slave(kobj);
|
||||
u8 wrbuf[3];
|
||||
u8 ack;
|
||||
|
||||
/* check arguments */
|
||||
if(off != 0 || count != 1 || buf == NULL)
|
||||
return -EINVAL;
|
||||
|
||||
mutex_lock(&sl->master->mutex);
|
||||
|
||||
/* Write the PIO data */
|
||||
if (w1_reset_select_slave(sl))
|
||||
return -1;
|
||||
|
||||
/* set bit 7..2 to value '1' */
|
||||
*buf = *buf | 0xFC;
|
||||
|
||||
wrbuf[0] = W1_F1C_ACCESS_WRITE;
|
||||
wrbuf[1] = *buf;
|
||||
wrbuf[2] = ~(*buf);
|
||||
w1_write_block(sl->master, wrbuf, 3);
|
||||
|
||||
w1_read_block(sl->master, &ack, sizeof(ack));
|
||||
|
||||
mutex_unlock(&sl->master->mutex);
|
||||
|
||||
/* check for acknowledgement */
|
||||
if(ack != 0xAA) return -EIO;
|
||||
|
||||
return count;
|
||||
}
|
||||
|
||||
static ssize_t w1_f1C_show_crccheck(struct device *dev, struct device_attribute *attr,
|
||||
char *buf)
|
||||
{
|
||||
if(put_user(w1_enable_crccheck + 0x30, buf))
|
||||
return -EFAULT;
|
||||
|
||||
return sizeof(w1_enable_crccheck);
|
||||
}
|
||||
|
||||
static ssize_t w1_f1C_store_crccheck(struct device *dev, struct device_attribute *attr,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
char val;
|
||||
|
||||
if(count != 1 || !buf) return -EINVAL;
|
||||
|
||||
if(get_user(val, buf))
|
||||
return -EFAULT;
|
||||
|
||||
/* convert to decimal */
|
||||
val = val - 0x30;
|
||||
if(val != 0 && val != 1) return -EINVAL;
|
||||
|
||||
/* set the new value */
|
||||
w1_enable_crccheck = val;
|
||||
|
||||
return sizeof(w1_enable_crccheck);
|
||||
}
|
||||
|
||||
#define NB_SYSFS_BIN_FILES 2
|
||||
static struct bin_attribute w1_f1C_bin_attr[NB_SYSFS_BIN_FILES] = {
|
||||
{
|
||||
.attr = {
|
||||
.name = "eeprom",
|
||||
.mode = S_IRUGO | S_IWUSR,
|
||||
},
|
||||
.size = W1_EEPROM_SIZE,
|
||||
.read = w1_f1C_read_bin,
|
||||
.write = w1_f1C_write_bin,
|
||||
},
|
||||
{
|
||||
.attr = {
|
||||
.name = "pio",
|
||||
.mode = S_IRUGO | S_IWUSR,
|
||||
},
|
||||
.size = 1,
|
||||
.read = w1_f1C_read_pio,
|
||||
.write = w1_f1C_write_pio,
|
||||
}
|
||||
};
|
||||
|
||||
static DEVICE_ATTR(crccheck, S_IWUSR | S_IRUGO, w1_f1C_show_crccheck, w1_f1C_store_crccheck);
|
||||
|
||||
static int w1_f1C_add_slave(struct w1_slave *sl)
|
||||
{
|
||||
int err = 0;
|
||||
int i;
|
||||
struct w1_f1C_data *data = NULL;
|
||||
|
||||
if(w1_enable_crccheck) {
|
||||
data = kzalloc(sizeof(struct w1_f1C_data), GFP_KERNEL);
|
||||
if (!data)
|
||||
return -ENOMEM;
|
||||
sl->family_data = data;
|
||||
}
|
||||
|
||||
/* create binary sysfs attributes */
|
||||
for (i = 0; i < NB_SYSFS_BIN_FILES && !err; ++i)
|
||||
err = sysfs_create_bin_file(&sl->dev.kobj, &(w1_f1C_bin_attr[i]));
|
||||
|
||||
if(err)
|
||||
goto out;
|
||||
|
||||
/* create device attributes */
|
||||
err = device_create_file(&sl->dev, &dev_attr_crccheck);
|
||||
|
||||
if(err) {
|
||||
/* remove binary sysfs attributes */
|
||||
for (i = 0; i < NB_SYSFS_BIN_FILES; ++i)
|
||||
sysfs_remove_bin_file(&sl->dev.kobj, &(w1_f1C_bin_attr[i]));
|
||||
}
|
||||
|
||||
out:
|
||||
if(err) {
|
||||
if(w1_enable_crccheck)
|
||||
kfree(data);
|
||||
}
|
||||
|
||||
return err;
|
||||
}
|
||||
|
||||
static void w1_f1C_remove_slave(struct w1_slave *sl)
|
||||
{
|
||||
int i;
|
||||
|
||||
if(w1_enable_crccheck) {
|
||||
kfree(sl->family_data);
|
||||
sl->family_data = NULL;
|
||||
}
|
||||
|
||||
/* remove device attributes */
|
||||
device_remove_file(&sl->dev, &dev_attr_crccheck);
|
||||
|
||||
/* remove binary sysfs attributes */
|
||||
for (i = 0; i < NB_SYSFS_BIN_FILES; ++i)
|
||||
sysfs_remove_bin_file(&sl->dev.kobj, &(w1_f1C_bin_attr[i]));
|
||||
}
|
||||
|
||||
static struct w1_family_ops w1_f1C_fops = {
|
||||
.add_slave = w1_f1C_add_slave,
|
||||
.remove_slave = w1_f1C_remove_slave,
|
||||
};
|
||||
|
||||
static struct w1_family w1_family_1C = {
|
||||
.fid = W1_FAMILY_DS28E04,
|
||||
.fops = &w1_f1C_fops,
|
||||
};
|
||||
|
||||
static int __init w1_f1C_init(void)
|
||||
{
|
||||
return w1_register_family(&w1_family_1C);
|
||||
}
|
||||
|
||||
static void __exit w1_f1C_fini(void)
|
||||
{
|
||||
w1_unregister_family(&w1_family_1C);
|
||||
}
|
||||
|
||||
module_init(w1_f1C_init);
|
||||
module_exit(w1_f1C_fini);
|
||||
|
|
@ -30,6 +30,7 @@
|
|||
#define W1_FAMILY_SMEM_01 0x01
|
||||
#define W1_FAMILY_SMEM_81 0x81
|
||||
#define W1_THERM_DS18S20 0x10
|
||||
#define W1_FAMILY_DS28E04 0x1C
|
||||
#define W1_COUNTER_DS2423 0x1D
|
||||
#define W1_THERM_DS1822 0x22
|
||||
#define W1_EEPROM_DS2433 0x23
|
||||
|
|
|
|||
Loading…
Reference in a new issue