Commit graph

1682 commits

Author SHA1 Message Date
Martin Willi
3590ebf2b4 crypto: testmgr - Add ChaCha20 test vectors from RFC7539
We explicitly set the Initial block Counter by prepending it to the nonce in
Little Endian. The same test vector is used for both encryption and decryption,
ChaCha20 is a cipher XORing a keystream.

Signed-off-by: Martin Willi <martin@strongswan.org>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-04 15:04:50 +08:00
Martin Willi
c08d0e6473 crypto: chacha20 - Add a generic ChaCha20 stream cipher implementation
ChaCha20 is a high speed 256-bit key size stream cipher algorithm designed by
Daniel J. Bernstein. It is further specified in RFC7539 for use in IETF
protocols as a building block for the ChaCha20-Poly1305 AEAD.

This is a portable C implementation without any architecture specific
optimizations. It uses a 16-byte IV, which includes the 12-byte ChaCha20 nonce
prepended by the initial block counter. Some algorithms require an explicit
counter value, for example the mentioned AEAD construction.

Signed-off-by: Martin Willi <martin@strongswan.org>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-04 15:04:49 +08:00
Herbert Xu
160544075f crypto: scatterwalk - Hide PageSlab call to optimise away flush_dcache_page
On architectures where flush_dcache_page is not needed, we will
end up generating all the code up to the PageSlab call.  This is
because PageSlab operates on a volatile pointer and thus cannot
be optimised away.

This patch works around this by checking whether flush_dcache_page
is needed before we call PageSlab which then allows PageSlab to be
compiled awy.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-03 10:51:25 +08:00
Herbert Xu
f614e546f5 crypto: cryptd - Convert to new AEAD interface
This patch converts cryptd to the new AEAD interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-03 10:48:37 +08:00
Herbert Xu
92b9876bdd crypto: cryptd - Add setkey/setauthsize functions for AEAD
This patch adds setkey and setauthsize for cryptd AEAD.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-03 10:48:35 +08:00
Herbert Xu
0496f56065 crypto: pcrypt - Add support for new AEAD interface
This patch converts pcrypt over to the new AEAD interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-03 10:48:35 +08:00
Herbert Xu
caab94612a crypto: aead - Add multiple algorithm registration interface
This patch adds the helpers that allow the registration and removal
of multiple algorithms.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-03 10:48:35 +08:00
Herbert Xu
43615369ab crypto: aead - Ignore return value from crypto_unregister_alg
No new code should be using the return value of crypto_unregister_alg
as it will become void soon.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-03 10:48:34 +08:00
Herbert Xu
c2110f2834 crypto: api - Include alignment in crypto_alg_extsize
This patch ensures that the tfm context always has enough extra
memory to ensure that it is aligned according to cra_alignment.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-03 10:48:34 +08:00
Herbert Xu
5eb8ec6dc8 crypto: aead - Add type-safe init/exit functions
As it stands the only non-type safe functions left in the new
AEAD interface are the cra_init/cra_exit functions.  It means
exposing the ugly __crypto_aead_cast to every AEAD implementor.

This patch adds type-safe init/exit functions to AEAD.  Existing
algorithms are unaffected while new implementations can simply
fill in these two instead of cra_init/cra_exit.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-03 10:48:33 +08:00
Herbert Xu
b64a2d9552 Revert "crypto: algif_aead - Disable AEAD user-space for now"
This reverts commit f858c7bcca as
the algif_aead interface has been switched over to the new AEAD
interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-03 10:48:31 +08:00
David S. Miller
dda922c831 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/phy/amd-xgbe-phy.c
	drivers/net/wireless/iwlwifi/Kconfig
	include/net/mac80211.h

iwlwifi/Kconfig and mac80211.h were both trivial overlapping
changes.

The drivers/net/phy/amd-xgbe-phy.c file got removed in 'net-next' and
the bug fix that happened on the 'net' side is already integrated
into the rest of the amd-xgbe driver.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-01 22:51:30 -07:00
Stephan Mueller
cf58fcb1be crypto: jitterentropy - remove timekeeping_valid_for_hres
The patch removes the use of timekeeping_valid_for_hres which is now
marked as internal for the time keeping subsystem. The jitterentropy
does not really require this verification as a coarse timer (when
random_get_entropy is absent) is discovered by the initialization test
of jent_entropy_init, which would cause the jitter rng to not load in
that case.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-28 11:23:21 +08:00
Herbert Xu
19fa77522e crypto: algif_aead - Switch to new AEAD interface
This patch makes use of the new AEAD interface which uses a single
SG list instead of separate lists for the AD and plain text.

Note that the user-space interface now requires both input and
output to be of the same length, and both must include space for
the AD as well as the authentication tag.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-28 11:23:21 +08:00
Herbert Xu
a3f2185a29 crypto: tcrypt - Switch to new AEAD interface
This patch makes use of the new AEAD interface which uses a single
SG list instead of separate lists for the AD and plain text.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-28 11:23:21 +08:00
Herbert Xu
8a525fcd46 crypto: testmgr - Switch to new AEAD interface
This patch makes use of the new AEAD interface which uses a single
SG list instead of separate lists for the AD and plain text.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-28 11:23:19 +08:00
Herbert Xu
056c04ba8b crypto: seqiv - Fix module unload/reload crash
On module unload we weren't unregistering the seqniv template,
thus leading to a crash the next time someone walks the template
list.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-28 11:23:19 +08:00
Herbert Xu
ccdb8a0384 crypto: seqiv - Fix IV size in context size calculation
This patch fixes a bug in the context size calculation where we
were still referring to the old cra_aead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-28 11:23:19 +08:00
Herbert Xu
661cfd0e5e crypto: seqiv - Use common IV generation code
This patch makes use of the new common IV generation code.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-28 11:23:18 +08:00
Herbert Xu
d0ad1b246d crypto: seqiv - Copy AD along with plain/cipher text
As the AD does not necessarily exist in the destination buffer
it must be copied along with the plain/cipher text.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-28 11:23:18 +08:00
Herbert Xu
9d03aee125 crypto: echainiv - Fix IV size in context size calculation
This patch fixes a bug in the context size calculation where we
were still referring to the old cra_aead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-28 11:23:18 +08:00
Herbert Xu
d97de47ca1 crypto: echainiv - Use common IV generation code
This patch makes use of the new common IV generation code.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-28 11:23:18 +08:00
Herbert Xu
838c9d561a crypto: echainiv - Copy AD along with plain text
As the AD does not necessarily exist in the destination buffer
it must be copied along with the plain text.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-28 11:23:18 +08:00
Herbert Xu
6350449fbf crypto: aead - Add common IV generation code
This patch adds some common IV generation code currently duplicated
by seqiv and echainiv.  For example, the setkey and setauthsize
functions are completely identical.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-28 11:23:17 +08:00
Herbert Xu
b455eb80f1 crypto: aead - Preserve in-place processing in old_crypt
This patch tries to preserve in-place processing in old_crypt as
various algorithms are optimised for in-place processing where
src == dst.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-28 11:23:17 +08:00
Herbert Xu
fdaef75f66 crypto: scatterwalk - Add missing sg_init_table to scatterwalk_ffwd
We need to call sg_init_table as otherwise the first entry may
inadvertently become the last.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-28 11:23:17 +08:00
Herbert Xu
6d7e3d8995 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Merge the crypto tree for 4.1 to pull in the changeset that disables
algif_aead.
2015-05-28 11:16:41 +08:00
Linus Torvalds
c09b5cbd0d Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
 "This disables the newly (4.1) added user-space AEAD interface so that
  we can fix issues in the underlying kernel AEAD interface.  Once the
  new kernel AEAD interface is ready we can then reenable the user-space
  AEAD interface"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algif_aead - Disable AEAD user-space for now
2015-05-27 08:40:44 -07:00
Stephan Mueller
bb5530e408 crypto: jitterentropy - add jitterentropy RNG
The CPU Jitter RNG provides a source of good entropy by
collecting CPU executing time jitter. The entropy in the CPU
execution time jitter is magnified by the CPU Jitter Random
Number Generator. The CPU Jitter Random Number Generator uses
the CPU execution timing jitter to generate a bit stream
which complies with different statistical measurements that
determine the bit stream is random.

The CPU Jitter Random Number Generator delivers entropy which
follows information theoretical requirements. Based on these
studies and the implementation, the caller can assume that
one bit of data extracted from the CPU Jitter Random Number
Generator holds one bit of entropy.

The CPU Jitter Random Number Generator provides a decentralized
source of entropy, i.e. every caller can operate on a private
state of the entropy pool.

The RNG does not have any dependencies on any other service
in the kernel. The RNG only needs a high-resolution time
stamp.

Further design details, the cryptographic assessment and
large array of test results are documented at
http://www.chronox.de/jent.html.

CC: Andreas Steffen <andreas.steffen@strongswan.org>
CC: Theodore Ts'o <tytso@mit.edu>
CC: Sandy Harris <sandyinchina@gmail.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-27 17:51:54 +08:00
Stephan Mueller
b8ec5ba42c crypto: drbg - use Jitter RNG to obtain seed
During initialization, the DRBG now tries to allocate a handle of the
Jitter RNG. If such a Jitter RNG is available during seeding, the DRBG
pulls the required entropy/nonce string from get_random_bytes and
concatenates it with a string of equal size from the Jitter RNG. That
combined string is now the seed for the DRBG.

Written differently, the initial seed of the DRBG is now:

get_random_bytes(entropy/nonce) || jitterentropy (entropy/nonce)

If the Jitter RNG is not available, the DRBG only seeds from
get_random_bytes.

CC: Andreas Steffen <andreas.steffen@strongswan.org>
CC: Theodore Ts'o <tytso@mit.edu>
CC: Sandy Harris <sandyinchina@gmail.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-27 17:51:53 +08:00
Stephan Mueller
4c7879907e crypto: drbg - add async seeding operation
The async seeding operation is triggered during initalization right
after the first non-blocking seeding is completed. As required by the
asynchronous operation of random.c, a callback function is provided that
is triggered by random.c once entropy is available. That callback
function performs the actual seeding of the DRBG.

CC: Andreas Steffen <andreas.steffen@strongswan.org>
CC: Theodore Ts'o <tytso@mit.edu>
CC: Sandy Harris <sandyinchina@gmail.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-27 17:51:53 +08:00
Stephan Mueller
3d6a5f75d1 crypto: drbg - prepare for async seeding
In order to prepare for the addition of the asynchronous seeding call,
the invocation of seeding the DRBG is moved out into a helper function.

In addition, a block of memory is allocated during initialization time
that will be used as a scratchpad for obtaining entropy. That scratchpad
is used for the initial seeding operation as well as by the
asynchronous seeding call. The memory must be zeroized every time the
DRBG seeding call succeeds to avoid entropy data lingering in memory.

CC: Andreas Steffen <andreas.steffen@strongswan.org>
CC: Theodore Ts'o <tytso@mit.edu>
CC: Sandy Harris <sandyinchina@gmail.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-27 17:51:53 +08:00
Herbert Xu
f858c7bcca crypto: algif_aead - Disable AEAD user-space for now
The newly added AEAD user-space isn't quite ready for prime time
just yet.  In particular it is conflicting with the AEAD single
SG list interface change so this patch disables it now.

Once the SG list stuff is completely done we can then renable
this interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-26 15:51:45 +08:00
Herbert Xu
374d4ad18a crypto: aead - Remove unused cryptoff parameter
This patch removes the cryptoff parameter now that all users
set it to zero.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-25 18:41:32 +08:00
Herbert Xu
dd04446e48 crypto: seqiv - Stop using cryptoff
The cryptoff parameter was added to facilitate the skipping of
IVs that sit between the AD and the plain/cipher text.  However,
it was never implemented correctly as and we do not handle users
such as IPsec setting cryptoff.  It is simply ignored.

Implementing correctly is in fact more trouble than what it's
worth.

This patch removes the uses of cryptoff by moving the AD forward
to fill the gap left by the IV.  The AD is moved back after the
underlying AEAD processing is finished.

This is in fact beter than the cryptoff solution because it allows
algorithms that use seqniv (i.e., GCM and CCM) to hash the whole
packet as a single piece, while cryptoff meant that there was
guaranteed to be a gap.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-25 18:41:31 +08:00
Herbert Xu
823655c99b crypto: echainiv - Stop using cryptoff
The cryptoff parameter was added to facilitate the skipping of
IVs that sit between the AD and the plain/cipher text.  However,
it was never implemented correctly as and we do not handle users
such as IPsec setting cryptoff.  It is simply ignored.

Implementing correctly is in fact more trouble than what it's
worth.

This patch removes the uses of cryptoff and simply falls back
to using the old AEAD interface as it's only needed for old AEAD
implementations.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-25 18:41:31 +08:00
Herbert Xu
d1ee1f02b7 crypto: aead - Do not set cra_type for new style instances
The function aead_geniv_alloc currently sets cra_type even for
new style instances.  This is unnecessary and may hide bugs such
as when our caller uses crypto_register_instance instead of the
correct aead_register_instance.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-25 18:41:31 +08:00
Herbert Xu
1e419c7970 crypto: echainiv - Use aead_register_instance
New style AEAD instances must use aead_register_instance.  This
worked by chance because aead_geniv_alloc is still setting things
the old way.

This patch converts the template over to the create model where
we are responsible for instance registration so that we can call
the correct function.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-25 18:41:30 +08:00
Herbert Xu
0677157b2b crypto: seqiv - Use aead_register_instance
New style AEAD instances must use aead_register_instance.  This
worked by chance because aead_geniv_alloc is still setting things
the old way.

This patch converts the template over to the create model where
we are responsible for instance registration so that we can call
the correct function.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-25 18:41:30 +08:00
Herbert Xu
72af865d34 crypto: aead - Use tmpl->create
Newer templates use tmpl->create and have a NULL tmpl->alloc.  So
we must use tmpl->create if it is set.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-25 18:41:29 +08:00
Herbert Xu
56e34378bb crypto: skcipher - Use tmpl->create
Newer templates use tmpl->create and have a NULL tmpl->alloc.  So
we must use tmpl->create if it is set.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-25 18:41:28 +08:00
Wu Fengguang
622ff87527 crypto: echainiv - echainiv_read_iv() can be static
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-25 18:41:28 +08:00
Herbert Xu
a5a22e57f6 crypto: pcrypt - Make tfm_count an atomic_t
The variable tfm_count is accessed by multiple threads without
locking.  This patch converts it to an atomic_t.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-25 18:41:25 +08:00
Herbert Xu
30e4c010ae crypto: aead - Add crypto_aead_alg_ivsize/maxauthsize
AEAD algorithm implementors need to figure out a given algorithm's
IV size and maximum authentication size.  During the transition
this is difficult to do as an algorithm could be new style or old
style.

This patch creates two helpers to make this easier.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-25 18:41:25 +08:00
Harald Freudenberger
445a8e0df3 crypto: testmgr - Added one larger ghash testvector (400 bytes) to the testmgr.
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-25 18:41:22 +08:00
David S. Miller
36583eb54d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/cadence/macb.c
	drivers/net/phy/phy.c
	include/linux/skbuff.h
	net/ipv4/tcp.c
	net/switchdev/switchdev.c

Switchdev was a case of RTNH_H_{EXTERNAL --> OFFLOAD}
renaming overlapping with net-next changes of various
sorts.

phy.c was a case of two changes, one adding a local
variable to a function whilst the second was removing
one.

tcp.c overlapped a deadlock fix with the addition of new tcp_info
statistic values.

macb.c involved the addition of two zyncq device entries.

skbuff.h involved adding back ipv4_daddr to nf_bridge_info
whilst net-next changes put two other existing members of
that struct into a union.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-23 01:22:35 -04:00
Herbert Xu
a10f554fa7 crypto: echainiv - Add encrypted chain IV generator
This patch adds a new AEAD IV generator echainiv.  It is intended
to replace the existing skcipher IV generator eseqiv.

If the underlying AEAD algorithm is using the old AEAD interface,
then echainiv will simply use its IV generator.

Otherwise, echainiv will encrypt a counter just like eseqiv but
it'll first xor it against a previously stored IV similar to
chainiv.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-22 11:25:56 +08:00
Herbert Xu
3c08fee7b5 crypto: seqiv - Add seqniv
This patch adds a new IV generator seqniv which is identical to
seqiv except that it skips the IV when authenticating.  This is
intended to be used by algorithms such as rfc4106 that does the
IV authentication implicitly.

Note that the code used for seqniv is in fact identical to the
compatibility case for seqiv.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-22 11:25:56 +08:00
Herbert Xu
856e3f4092 crypto: seqiv - Add support for new AEAD interface
This patch converts the seqiv IV generator to work with the new
AEAD interface where IV generators are just normal AEAD algorithms.

Full backwards compatibility is paramount at this point since
no users have yet switched over to the new interface.  Nor can
they switch to the new interface until IV generation is fully
supported by it.

So this means we are adding two versions of seqiv alongside the
existing one.  The first one is the one that will be used when
the underlying AEAD algorithm has switched over to the new AEAD
interface.  The second one handles the current case where the
underlying AEAD algorithm still uses the old interface.

Both versions export themselves through the new AEAD interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-22 11:25:56 +08:00
Herbert Xu
74412fd5d7 crypto: scatterwalk - Check for same address in map_and_copy
This patch adds a check for in scatterwalk_map_and_copy to avoid
copying from the same address to the same address.  This is going
to be used for IV copying in AEAD IV generators.

There is no provision for partial overlaps.

This patch also uses the new scatterwalk_ffwd instead of doing
it by hand in scatterwalk_map_and_copy.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-22 11:25:55 +08:00
Herbert Xu
17db854699 crypto: gcm - Use default null skcipher
This patch makes gcm use the default null skcipher instead of
allocating a new one for each tfm.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-22 11:25:55 +08:00
Herbert Xu
330234638e crypto: null - Add default null skcipher
This patch adds a default null skcipher for users such as gcm
to perform copies on SG lists.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-22 11:25:55 +08:00
Herbert Xu
63293c6113 crypto: aead - Add support for new AEAD implementations
This patch adds the basic structure of the new AEAD type.  Unlike
the current version, there is no longer any concept of geniv.  IV
generation will still be carried out by wrappers but they will be
normal AEAD algorithms that simply take the IPsec sequence number
as the IV.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-22 11:25:54 +08:00
Herbert Xu
2d0f230fe0 crypto: aead - Rename aead_alg to old_aead_alg
This patch is the first step in the introduction of a new AEAD
alg type.  Unlike normal conversions this patch only renames the
existing aead_alg structure because there are external references
to it.

Those references will be removed after this patch.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-22 11:25:51 +08:00
Herbert Xu
996d98d85c crypto: aead - Add new interface with single SG list
The primary user of AEAD, IPsec includes the IV in the AD in
most cases, except where it is implicitly authenticated by the
underlying algorithm.

The way it is currently implemented is a hack because we pass
the data in piecemeal and the underlying algorithms try to stitch
them back up into one piece.

This is why this patch is adding a new interface that allows a
single SG list to be passed in that contains everything so the
algorithm implementors do not have to stitch.

The new interface accepts a single source SG list and a single
destination SG list.  Both must be laid out as follows:

	AD, skipped data, plain/cipher text, ICV

The ICV is not present from the source during encryption and from
the destination during decryption.

For the top-level IPsec AEAD algorithm the plain/cipher text will
contain the generated (or received) IV.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-22 11:25:51 +08:00
Herbert Xu
fc42bcba97 crypto: scatterwalk - Add scatterwalk_ffwd helper
This patch adds the scatterwalk_ffwd helper which can create an
SG list that starts in the middle of an existing SG list.  The
new list may either be part of the existing list or be a chain
that latches onto part of the existing list.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-22 11:25:50 +08:00
Herbert Xu
66d948e732 crypto: pcrypt - Use crypto_grab_aead
As AEAD has switched over to using frontend types, the function
crypto_init_spawn must not be used since it does not specify a
frontend type.  Otherwise it leads to a crash when the spawn is
used.

This patch fixes it by switching over to crypto_grab_aead instead.

Fixes: 5d1d65f8be ("crypto: aead - Convert top level interface to new style")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-22 11:25:49 +08:00
Herbert Xu
9b8c456e08 crypto: cryptd - Use crypto_grab_aead
As AEAD has switched over to using frontend types, the function
crypto_init_spawn must not be used since it does not specify a
frontend type.  Otherwise it leads to a crash when the spawn is
used.

This patch fixes it by switching over to crypto_grab_aead instead.

Fixes: 5d1d65f8be ("crypto: aead - Convert top level interface to new style")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-22 11:25:49 +08:00
Linus Torvalds
e51a363056 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
 "This fixes a the crash in the newly added algif_aead interface when it
  tries to link SG lists"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algif_aead - fix invalid sgl linking
2015-05-21 17:16:49 -07:00
Mimi Zohar
f2b3dee484 KEYS: fix "ca_keys=" partial key matching
The call to asymmetric_key_hex_to_key_id() from ca_keys_setup()
silently fails with -ENOMEM.  Instead of dynamically allocating
memory from a __setup function, this patch defines a variable
and calls __asymmetric_key_hex_to_key_id(), a new helper function,
directly.

This bug was introduced by 'commit 46963b774d ("KEYS: Overhaul
key identification when searching for asymmetric keys")'.

Changelog:
- for clarification, rename hexlen to asciihexlen in
  asymmetric_key_hex_to_key_id()
- add size argument to __asymmetric_key_hex_to_key_id() - David Howells
- inline __asymmetric_key_hex_to_key_id() - David Howells
- remove duplicate strlen() calls

Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # 3.18
2015-05-21 13:58:59 -04:00
LABBE Corentin
6a185016f4 crypto: md5 - use md5 IV MD5_HX instead of their raw value
Since MD5 IV are now available in crypto/md5.h, use them.

Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-18 12:20:18 +08:00
Tadeusz Struk
7b2a18e05f crypto: algif_aead - fix invalid sgl linking
This patch fixes it.
Also minor updates to comments.

Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-18 12:13:06 +08:00
Herbert Xu
5d1d65f8be crypto: aead - Convert top level interface to new style
This patch converts the top-level aead interface to the new style.
All user-level AEAD interface code have been moved into crypto/aead.h.

The allocation/free functions have switched over to the new way of
allocating tfms.

This patch also removes the double indrection on setkey so the
indirection now exists only at the alg level.

Apart from these there are no user-visible changes.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:53 +08:00
Herbert Xu
ba6d8e3958 crypto: seqiv - Use crypto_aead_set_reqsize helper
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:41 +08:00
Herbert Xu
fd0de97890 crypto: pcrypt - Use crypto_aead_set_reqsize helper
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:41 +08:00
Herbert Xu
5d72336f1b crypto: gcm - Use crypto_aead_set_reqsize helper
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:40 +08:00
Herbert Xu
529a0b625b crypto: cryptd - Use crypto_aead_set_reqsize helper
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:40 +08:00
Herbert Xu
2c221ad394 crypto: ccm - Use crypto_aead_set_reqsize helper
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:39 +08:00
Herbert Xu
6650d09b3a crypto: authencesn - Use crypto_aead_set_reqsize helper
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:38 +08:00
Herbert Xu
25df919430 crypto: authenc - Use crypto_aead_set_reqsize helper
This patch uses the crypto_aead_set_reqsize helper to avoid directly
touching the internals of aead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:37 +08:00
Herbert Xu
d1a2fd500c crypto: blkcipher - Include crypto/aead.h
All users of AEAD should include crypto/aead.h instead of
include/linux/crypto.h.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:34 +08:00
Herbert Xu
7fb2a4bdce crypto: authencesn - Include internal/aead.h
All AEAD implementations must include internal/aead.h in order
to access required helpers.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:26 +08:00
Herbert Xu
68acbf843c crypto: authenc - Include internal/aead.h
All AEAD implementations must include internal/aead.h in order
to access required helpers.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:26 +08:00
Herbert Xu
d6ef2f198d crypto: api - Add crypto_grab_spawn primitive
This patch adds a new primitive crypto_grab_spawn which is meant
to replace crypto_init_spawn and crypto_init_spawn2.  Under the
new scheme the user no longer has to worry about reference counting
the alg object before it is subsumed by the spawn.

It is pretty much an exact copy of crypto_grab_aead.

Prior to calling this function spawn->frontend and spawn->inst
must have been set.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-13 10:31:25 +08:00
Eric W. Biederman
11aa9c28b4 net: Pass kern from net_proto_family.create to sk_alloc
In preparation for changing how struct net is refcounted
on kernel sockets pass the knowledge that we are creating
a kernel socket from sock_create_kern through to sk_alloc.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 10:50:17 -04:00
Dan Streetman
2062c5b6da crypto: 842 - change 842 alg to use software
Change the crypto 842 compression alg to use the software 842 compression
and decompression library.  Add the crypto driver_name as "842-generic".
Remove the fallback to LZO compression.

Previously, this crypto compression alg attemped 842 compression using
PowerPC hardware, and fell back to LZO compression and decompression if
the 842 PowerPC hardware was unavailable or failed.  This should not
fall back to any other compression method, however; users of this crypto
compression alg can fallback if desired, and transparent fallback tricks
callers into thinking they are getting 842 compression when they actually
get LZO compression - the failure of the 842 hardware should not be
transparent to the caller.

The crypto compression alg for a hardware device also should not be located
in crypto/ so this is now a software-only implementation that uses the 842
software compression/decompression library.

Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-11 15:06:43 +08:00
Ard Biesheuvel
ebb3472f5c crypto: testmgr - add test cases for CRC32
This adds a couple of test cases for CRC32 (not CRC32c) to
ensure that the generic and arch specific implementations
are in sync.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-11 15:06:36 +08:00
David Howells
09e217844a crypto: testmgr - Wrap the LHS in expressions of the form !x == y
In the test manager, there are a number of if-statements with expressions of
the form !x == y that incur warnings with gcc-5 of the following form:

../crypto/testmgr.c: In function '__test_aead':
../crypto/testmgr.c:523:12: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
   if (!ret == template[i].fail) {
            ^

By converting the 'fail' member of struct aead_testvec and struct
cipher_testvec to a bool, we can get rid of the warnings.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-01 11:16:37 +08:00
David Howells
f94a359763 crypto: pcomp - Constify (de)compression parameters
In testmgr, struct pcomp_testvec takes a non-const 'params' field, which is
pointed to a const deflate_comp_params or deflate_decomp_params object.  With
gcc-5 this incurs the following warnings:

In file included from ../crypto/testmgr.c:44:0:
../crypto/testmgr.h:28736:13: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers]
   .params = &deflate_comp_params,
             ^
../crypto/testmgr.h:28748:13: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers]
   .params = &deflate_comp_params,
             ^
../crypto/testmgr.h:28776:13: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers]
   .params = &deflate_decomp_params,
             ^
../crypto/testmgr.h:28800:13: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers]
   .params = &deflate_decomp_params,
             ^

Fix this by making the parameters pointer const and constifying the things
that use it.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-01 11:16:37 +08:00
Herbert Xu
80f7b3552c crypto: aead - Fix corner case in crypto_lookup_aead
When the user explicitly states that they don't care whether the
algorithm has been tested (type = CRYPTO_ALG_TESTED and mask = 0),
there is a corner case where we may erroneously return ENOENT.

This patch fixes it by correcting the logic in the test.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-26 14:33:16 +08:00
Herbert Xu
2673953520 crypto: skcipher - Fix corner case in crypto_lookup_skcipher
When the user explicitly states that they don't care whether the
algorithm has been tested (type = CRYPTO_ALG_TESTED and mask = 0),
there is a corner case where we may erroneously return ENOENT.

This patch fixes it by correcting the logic in the test.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-26 14:33:15 +08:00
Herbert Xu
bd4a7c69aa crypto: api - Fix build error when modules are disabled
The commit 59afdc7b32 ("crypto:
api - Move module sig ifdef into accessor function") broke the
build when modules are completely disabled because we directly
dereference module->name.

This patch fixes this by using the accessor function module_name.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-26 14:33:15 +08:00
Linus Torvalds
474095e46c md updates for 4.1
Highlights:
 
 - "experimental" code for managing md/raid1 across a cluster using
   DLM.  Code is not ready for general use and triggers a WARNING if used.
   However it is looking good and mostly done and having in mainline
   will help co-ordinate development.
 - RAID5/6 can now batch multiple (4K wide) stripe_heads so as to
   handle a full (chunk wide) stripe as a single unit.
 - RAID6 can now perform read-modify-write cycles which should
   help performance on larger arrays: 6 or more devices.
 - RAID5/6 stripe cache now grows and shrinks dynamically.  The value
   set is used as a minimum.
 - Resync is now allowed to go a little faster than the 'mininum' when
   there is competing IO.  How much faster depends on the speed of the
   devices, so the effective minimum should scale with device speed to
   some extent.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIVAwUAVTbIxDnsnt1WYoG5AQIgAA//Z9FlEpkHcJJ75WGjrXgGJPyNTfEZOkoz
 jnD8PpBY2Afp341vMatd0XKErdEAhuPQmJMAa+tbxht6pk77X3fSzXghGA8FEafg
 yazn5pfBt6NXmepV4vhl/+LNYuWRxxLSA9EDm7wEg+tiO0UEts+a0w2TSXzcT1w+
 30Yi1EjAlTaJ5yjlBHUOtTXWE43D6RKnUr6FMy2dRlnzlFyDlezRMChWo9v6OkQF
 YqJ20FcvmJdLHY/6Yif3jvpm7eQecMqdCZENTvW/mJI86zqf6E+ToCYS1VNjfDnK
 ud61iU9eshu4WtNWBG6KLuHBD0grO1NaEL7/S16w1KdNJMhYgiK8WussvIAJEesA
 5SlETM7Y/1XFq8puwlAq2/tuPfhZ+TFxnAwce/C3hMTDcYAACnS/R6INFQXqGvy3
 nX1NLogrCycX8oqxv3jTFKLVqIVwlkSlHcUGzIWjcfCF37StcXFKI5q862agyg2+
 NNocFMuXhPPM1YcB9JJSo2nCsor4e9tTdVEZlFm2B3cc8LJ9BLWUMSoi1h7VK/1g
 P7psnPIjz7/cdI2TZTFjGTZ0Kvhx/NTYp41AZealDNxeGWUNM+5xGZnUF8QRBc/E
 0dGHtEAah834BDQFvNnJtuuh/s+KwbvswjNP+njoBsHjIQIvngDABpOwpIkdqF6r
 diQ2gUPnHN0=
 =OHG6
 -----END PGP SIGNATURE-----

Merge tag 'md/4.1' of git://neil.brown.name/md

Pull md updates from Neil Brown:
 "More updates that usual this time.  A few have performance impacts
  which hould mostly be positive, but RAID5 (in particular) can be very
  work-load ensitive...  We'll have to wait and see.

  Highlights:

   - "experimental" code for managing md/raid1 across a cluster using
     DLM.  Code is not ready for general use and triggers a WARNING if
     used.  However it is looking good and mostly done and having in
     mainline will help co-ordinate development.

   - RAID5/6 can now batch multiple (4K wide) stripe_heads so as to
     handle a full (chunk wide) stripe as a single unit.

   - RAID6 can now perform read-modify-write cycles which should help
     performance on larger arrays: 6 or more devices.

   - RAID5/6 stripe cache now grows and shrinks dynamically.  The value
     set is used as a minimum.

   - Resync is now allowed to go a little faster than the 'mininum' when
     there is competing IO.  How much faster depends on the speed of the
     devices, so the effective minimum should scale with device speed to
     some extent"

* tag 'md/4.1' of git://neil.brown.name/md: (58 commits)
  md/raid5: don't do chunk aligned read on degraded array.
  md/raid5: allow the stripe_cache to grow and shrink.
  md/raid5: change ->inactive_blocked to a bit-flag.
  md/raid5: move max_nr_stripes management into grow_one_stripe and drop_one_stripe
  md/raid5: pass gfp_t arg to grow_one_stripe()
  md/raid5: introduce configuration option rmw_level
  md/raid5: activate raid6 rmw feature
  md/raid6 algorithms: xor_syndrome() for SSE2
  md/raid6 algorithms: xor_syndrome() for generic int
  md/raid6 algorithms: improve test program
  md/raid6 algorithms: delta syndrome functions
  raid5: handle expansion/resync case with stripe batching
  raid5: handle io error of batch list
  RAID5: batch adjacent full stripe write
  raid5: track overwrite disk count
  raid5: add a new flag to track if a stripe can be batched
  raid5: use flex_array for scribble data
  md raid0: access mddev->queue (request queue member) conditionally because it is not set when accessed from dm-raid
  md: allow resync to go faster when there is competing IO.
  md: remove 'go_faster' option from ->sync_request()
  ...
2015-04-24 09:28:01 -07:00
Herbert Xu
1ce3311580 crypto: testmgr - Include crypto/aead.h
All users of AEAD should include crypto/aead.h instead of
include/linux/crypto.h.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: David S. Miller <davem@davemloft.net>
2015-04-23 14:18:11 +08:00
Herbert Xu
1ce5a04d9f crypto: tcrypt - Include crypto/aead.h
All users of AEAD should include crypto/aead.h instead of
include/linux/crypto.h.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: David S. Miller <davem@davemloft.net>
2015-04-23 14:18:11 +08:00
Herbert Xu
89081da51d crypto: algif_aead - Include crypto/aead.h
All users of AEAD should include crypto/aead.h instead of
include/linux/crypto.h.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: David S. Miller <davem@davemloft.net>
2015-04-23 14:18:10 +08:00
Herbert Xu
7be58b1250 crypto: api - Remove linux/fips.h from internal.h
Now that all fips_enabled users are including linux/fips.h directly
instead of getting it through internal.h, we can remove the fips.h
inclusions from internal.h.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-23 14:18:10 +08:00
Herbert Xu
1c41b88249 crypto: testmgr - Include linux/fips.h for fips_enabled
All users of fips_enabled should include linux/fips.h directly
instead of getting it through internal.h.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-23 14:18:10 +08:00
Herbert Xu
daf0944cfb crypto: tcrypt - Include linux/fips.h for fips_enabled
All users of fips_enabled should include linux/fips.h directly
instead of getting it through internal.h which is reserved for
internal crypto API implementors.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-23 14:18:09 +08:00
Herbert Xu
94072cb20e crypto: fips - Move fips_enabled sysctl into fips.c
There is currently a large ifdef FIPS code section in proc.c.
Ostensibly it's there because the fips_enabled sysctl sits under
/proc/sys/crypto.  However, no other crypto sysctls exist.

In fact, the whole ethos of the crypto API is against such user
interfaces so this patch moves all the FIPS sysctl code over to
fips.c.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-23 14:18:09 +08:00
Herbert Xu
76450f93f1 crypto: fips - Remove bogus inclusion of internal.h
The header file internal.h is only meant for internal crypto API
implementors such as rng.c.  So fips has no business in including
it.

This patch removes that inclusions and instead adds inclusions of
the actual features used by fips.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-23 14:18:08 +08:00
Herbert Xu
3133d76fc6 crypto: api - Include linux/fips.h
All users of fips_enabled should include linux/fips.h directly
instead of getting it through internal.h.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-23 14:18:08 +08:00
Herbert Xu
b94e7dc581 crypto: drbg - Remove FIPS ifdef from drbg_healthcheck_sanity
This patch removes the unnecessary CRYPTO_FIPS ifdef from
drbg_healthcheck_sanity so that the code always gets checked
by the compiler.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Stephan Mueller <smueller@chronox.de>
2015-04-23 14:18:07 +08:00
Herbert Xu
59afdc7b32 crypto: api - Move module sig ifdef into accessor function
Currently we're hiding mod->sig_ok under an ifdef in open code.
This patch adds a module_sig_ok accessor function and removes that
ifdef.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
2015-04-23 14:18:07 +08:00
Herbert Xu
43a9607d86 crypto: tcrypt - Handle async return from crypto_ahash_init
The function crypto_ahash_init can also be asynchronous just
like update and final.  So all callers must be able to handle
an async return.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-23 14:18:05 +08:00
Herbert Xu
b617b702da crypto: rng - Zero seed in crypto_rng_reset
If we allocate a seed on behalf ot the user in crypto_rng_reset,
we must ensure that it is zeroed afterwards or the RNG may be
compromised.

Reported-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-22 09:30:21 +08:00
Herbert Xu
654ae152b3 crypto: algif_rng - Remove obsolete const-removal cast
Now that crypto_rng_reset takes a const argument, we no longer
need to cast away the const qualifier.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-22 09:30:21 +08:00
Herbert Xu
94f1bb15be crypto: rng - Remove old low-level rng interface
Now that all rng implementations have switched over to the new
interface, we can remove the old low-level interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-22 09:30:20 +08:00
Herbert Xu
e33cf2c5aa crypto: krng - Convert to new rng interface
This patch ocnverts the KRNG implementation to the new low-level
rng interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-22 09:30:18 +08:00
Herbert Xu
e7c2422a83 crypto: ansi_cprng - Convert to new rng interface
This patch ocnverts the ANSI CPRNG implementation to the new
low-level rng interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
2015-04-22 09:30:18 +08:00
Herbert Xu
6f7e3caa9e crypto: ansi_cprng - Remove bogus inclusion of internal.h
The file internal.h is only meant to be used by internel API
implementation and not algorithm implementations.  In fact it
isn't even needed here so this patch removes it.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
2015-04-22 09:30:17 +08:00
Herbert Xu
8fded5925d crypto: drbg - Convert to new rng interface
This patch converts the DRBG implementation to the new low-level
rng interface.

This allows us to get rid of struct drbg_gen by using the new RNG
API instead.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Stephan Mueller <smueller@chronox.de>
2015-04-22 09:30:17 +08:00
Herbert Xu
881cd6c570 crypto: rng - Add multiple algorithm registration interface
This patch adds the helpers that allow the registration and removal
of multiple RNG algorithms.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-22 09:30:16 +08:00
Herbert Xu
acec27ff35 crypto: rng - Convert low-level crypto_rng to new style
This patch converts the low-level crypto_rng interface to the
"new" style.

This allows existing implementations to be converted over one-
by-one.  Once that is complete we can then remove the old rng
interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-22 09:30:14 +08:00
Herbert Xu
3c5d8fa9f5 crypto: rng - Mark crypto_rng_reset seed as const
There is no reason why crypto_rng_reset should modify the seed
so this patch marks it as const.  Since our algorithms don't
export a const seed function yet we have to go through some
contortions for now.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-22 09:30:07 +08:00
Markus Stockhausen
584acdd49c md/raid5: activate raid6 rmw feature
Glue it altogehter. The raid6 rmw path should work the same as the
already existing raid5 logic. So emulate the prexor handling/flags
and split functions as needed.

1) Enable xor_syndrome() in the async layer.

2) Split ops_run_prexor() into RAID4/5 and RAID6 logic. Xor the syndrome
at the start of a rmw run as we did it before for the single parity.

3) Take care of rmw run in ops_run_reconstruct6(). Again process only
the changed pages to get syndrome back into sync.

4) Enhance set_syndrome_sources() to fill NULL pages if we are in a rmw
run. The lower layers will calculate start & end pages from that and
call the xor_syndrome() correspondingly.

5) Adapt the several places where we ignored Q handling up to now.

Performance numbers for a single E5630 system with a mix of 10 7200k
desktop/server disks. 300 seconds random write with 8 threads onto a
3,2TB (10*400GB) RAID6 64K chunk without spare (group_thread_cnt=4)

bsize   rmw_level=1   rmw_level=0   rmw_level=1   rmw_level=0
        skip_copy=1   skip_copy=1   skip_copy=0   skip_copy=0
   4K      115 KB/s      141 KB/s      165 KB/s      140 KB/s
   8K      225 KB/s      275 KB/s      324 KB/s      274 KB/s
  16K      434 KB/s      536 KB/s      640 KB/s      534 KB/s
  32K      751 KB/s    1,051 KB/s    1,234 KB/s    1,045 KB/s
  64K    1,339 KB/s    1,958 KB/s    2,282 KB/s    1,962 KB/s
 128K    2,673 KB/s    3,862 KB/s    4,113 KB/s    3,898 KB/s
 256K    7,685 KB/s    7,539 KB/s    7,557 KB/s    7,638 KB/s
 512K   19,556 KB/s   19,558 KB/s   19,652 KB/s   19,688 Kb/s

Signed-off-by: Markus Stockhausen <stockhausen@collogia.de>
Signed-off-by: NeilBrown <neilb@suse.de>
2015-04-22 08:00:42 +10:00
Herbert Xu
ff030b099a crypto: rng - Introduce crypto_rng_generate
This patch adds the new top-level function crypto_rng_generate
which generates random numbers with additional input.  It also
extends the mid-level rng_gen_random function to take additional
data as input.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-21 10:19:58 +08:00
Herbert Xu
d0e83059a6 crypto: rng - Convert crypto_rng to new style crypto_type
This patch converts the top-level crypto_rng to the "new" style.
It was the last algorithm type added before we switched over
to the new way of doing things exemplified by shash.

All users will automatically switch over to the new interface.

Note that this patch does not touch the low-level interface to
rng implementations.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-21 10:19:57 +08:00
Herbert Xu
f7c9bebe8b crypto: pcomp - Use crypto_alg_extsize helper
This patch replaces crypto_pcomp_extsize function with
crypto_alg_extsize.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-21 10:19:55 +08:00
Herbert Xu
ac611680cb crypto: shash - Use crypto_alg_extsize helper
This patch replaces crypto_shash_extsize function with
crypto_alg_extsize.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-21 10:19:54 +08:00
Herbert Xu
38d2143311 crypto: api - Add crypto_alg_extsize helper
This patch adds a crypto_alg_extsize helper that can be used
by algorithm types such as pcompress and shash.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-21 10:19:54 +08:00
Herbert Xu
2a57e4241e crypto: drbg - Do not seed RNG in drbg_kcapi_init
Initialising the RNG in drbg_kcapi_init is a waste of precious
entropy because all users will immediately seed the RNG after
the allocation.

In fact, all users should seed the RNG before using it.  So there
is no point in doing the seeding in drbg_kcapi_init.

This patch removes the initial seeding and the user must seed
the RNG explicitly (as they all currently do).

This patch also changes drbg_kcapi_reset to allow reseeding.
That is, if you call it after a successful initial seeding, then
it will not reset the internal state of the DRBG before mixing
the new input and entropy.

If you still wish to reset the internal state, you can always
free the DRBG and allocate a new one.

Finally this patch removes locking from drbg_uninstantiate because
it's now only called from the destruction path which must not be
executed in parallel with normal operations.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Stephan Mueller <smueller@chronox.de>
2015-04-21 10:19:53 +08:00
Herbert Xu
e11a754813 crypto: drbg - Initialise mutex in drbg_healthcheck_sanity
As we moved the mutex init out of drbg_instantiate and into cra_init
we need to explicitly initialise the mutex in drbg_healthcheck_sanity.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Stephan Mueller <smueller@chronox.de>
2015-04-21 10:19:52 +08:00
Stephan Mueller
fa3ae6253c crypto: drbg - leave cipher handles operational
As the DRBG does not operate on shadow copies of the DRBG instance
any more, the cipher handles only need to be allocated once during
initalization time and deallocated during uninstantiate time.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-21 09:14:45 +08:00
Stephan Mueller
76899a41f8 crypto: drbg - replace spinlock with mutex
The creation of a shadow copy is intended to only hold a short term
lock. But the drawback is that parallel users have a very similar DRBG
state which only differs by a high-resolution time stamp.

The DRBG will now hold a long term lock. Therefore, the lock is changed
to a mutex which implies that the DRBG can only be used in process
context.

The lock now guards the instantiation as well as the entire DRBG
generation operation. Therefore, multiple callers are fully serialized
when generating a random number.

As the locking is changed to use a long-term lock to avoid such similar
DRBG states, the entire creation and maintenance of a shadow copy can be
removed.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-21 09:14:45 +08:00
Stephan Mueller
082eb10ba9 crypto: drbg - fix drbg_generate return val check
The drbg_generate returns 0 in success case. That means that
drbg_generate_long will always only generate drbg_max_request_bytes at
most. Longer requests will be truncated to drbg_max_request_bytes.

Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-21 09:14:45 +08:00
Stephan Mueller
8e0498d99f cryoto: drbg - clear all temporary memory
The buffer uses for temporary data must be cleared entirely. In AES192
the used buffer is drbg_statelen(drbg) + drbg_blocklen(drbg) as
documented in the comment above drbg_ctr_df.

This patch ensures that the temp buffer is completely wiped.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-21 09:14:38 +08:00
Herbert Xu
34c9a0ffc7 crypto: fix broken crypto_register_instance() module handling
Commit 9c521a200b ("crypto: api - remove instance when test failed")
tried to grab a module reference count before the module was even set.

Worse, it then goes on to free the module reference count after it is
set so you quickly end up with a negative module reference count which
prevents people from using any instances belonging to that module.

This patch moves the module initialisation before the reference
count.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 20:26:16 -07:00
Linus Torvalds
eccd02f32a crypto: fix mis-merge with the networking merge
The networking updates from David Miller removed the iocb argument from
sendmsg and recvmsg (in commit 1b78414047: "net: Remove iocb argument
from sendmsg and recvmsg"), but the crypto code had added new instances
of them.

When I pulled the crypto update, it was a silent semantic mis-merge, and
I overlooked the new warning messages in my test-build.  I try to fix
those in the merge itself, but that relies on me noticing. Oh well.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 14:09:46 -07:00
Linus Torvalds
cb906953d2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
 "Here is the crypto update for 4.1:

  New interfaces:
   - user-space interface for AEAD
   - user-space interface for RNG (i.e., pseudo RNG)

  New hashes:
   - ARMv8 SHA1/256
   - ARMv8 AES
   - ARMv8 GHASH
   - ARM assembler and NEON SHA256
   - MIPS OCTEON SHA1/256/512
   - MIPS img-hash SHA1/256 and MD5
   - Power 8 VMX AES/CBC/CTR/GHASH
   - PPC assembler AES, SHA1/256 and MD5
   - Broadcom IPROC RNG driver

  Cleanups/fixes:
   - prevent internal helper algos from being exposed to user-space
   - merge common code from assembly/C SHA implementations
   - misc fixes"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (169 commits)
  crypto: arm - workaround for building with old binutils
  crypto: arm/sha256 - avoid sha256 code on ARMv7-M
  crypto: x86/sha512_ssse3 - move SHA-384/512 SSSE3 implementation to base layer
  crypto: x86/sha256_ssse3 - move SHA-224/256 SSSE3 implementation to base layer
  crypto: x86/sha1_ssse3 - move SHA-1 SSSE3 implementation to base layer
  crypto: arm64/sha2-ce - move SHA-224/256 ARMv8 implementation to base layer
  crypto: arm64/sha1-ce - move SHA-1 ARMv8 implementation to base layer
  crypto: arm/sha2-ce - move SHA-224/256 ARMv8 implementation to base layer
  crypto: arm/sha256 - move SHA-224/256 ASM/NEON implementation to base layer
  crypto: arm/sha1-ce - move SHA-1 ARMv8 implementation to base layer
  crypto: arm/sha1_neon - move SHA-1 NEON implementation to base layer
  crypto: arm/sha1 - move SHA-1 ARM asm implementation to base layer
  crypto: sha512-generic - move to generic glue implementation
  crypto: sha256-generic - move to generic glue implementation
  crypto: sha1-generic - move to generic glue implementation
  crypto: sha512 - implement base layer for SHA-512
  crypto: sha256 - implement base layer for SHA-256
  crypto: sha1 - implement base layer for SHA-1
  crypto: api - remove instance when test failed
  crypto: api - Move alg ref count init to crypto_check_alg
  ...
2015-04-15 10:42:15 -07:00
Al Viro
01e97e6517 new helper: msg_data_left()
convert open-coded instances

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11 15:53:35 -04:00
Ard Biesheuvel
ca142584bc crypto: sha512-generic - move to generic glue implementation
This updated the generic SHA-512 implementation to use the
generic shared SHA-512 glue code.

It also implements a .finup hook crypto_sha512_finup() and exports
it to other modules. The import and export() functions and the
.statesize member are dropped, since the default implementation
is perfectly suitable for this module.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-10 21:39:41 +08:00
Ard Biesheuvel
a2e5ba4fed crypto: sha256-generic - move to generic glue implementation
This updates the generic SHA-256 implementation to use the
new shared SHA-256 glue code.

It also implements a .finup hook crypto_sha256_finup() and exports
it to other modules. The import and export() functions and the
.statesize member are dropped, since the default implementation
is perfectly suitable for this module.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-10 21:39:41 +08:00
Ard Biesheuvel
7c71f0f760 crypto: sha1-generic - move to generic glue implementation
This updated the generic SHA-1 implementation to use the generic
shared SHA-1 glue code.

It also implements a .finup hook crypto_sha1_finup() and exports
it to other modules. The import and export() functions and the
.statesize member are dropped, since the default implementation
is perfectly suitable for this module.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-10 21:39:40 +08:00
Stephan Mueller
9c521a200b crypto: api - remove instance when test failed
A cipher instance is added to the list of instances unconditionally
regardless of whether the associated test failed. However, a failed
test implies that during another lookup, the cipher instance will
be added to the list again as it will not be found by the lookup
code.

That means that the list can be filled up with instances whose tests
failed.

Note: tests only fail in reality in FIPS mode when a cipher is not
marked as fips_allowed=1. This can be seen with cmac(des3_ede) that does
not have a fips_allowed=1. When allocating the cipher, the allocation
fails with -ENOENT due to the missing fips_allowed=1 flag (which
causes the testmgr to return EINVAL). Yet, the instance of
cmac(des3_ede) is shown in /proc/crypto. Allocating the cipher again
fails again, but a 2nd instance is listed in /proc/crypto.

The patch simply de-registers the instance when the testing failed.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-10 21:39:38 +08:00
Herbert Xu
e9b8e5beb7 crypto: api - Move alg ref count init to crypto_check_alg
We currently initialise the crypto_alg ref count in the function
__crypto_register_alg.  As one of the callers of that function
crypto_register_instance needs to obtain a ref count before it
calls __crypto_register_alg, we need to move the initialisation
out of there.

Since both callers of __crypto_register_alg call crypto_check_alg,
this is the logical place to perform the initialisation.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Stephan Mueller <smueller@chronox.de>
2015-04-10 21:39:24 +08:00
Al Viro
237dae8890 Merge branch 'iocb' into for-davem
trivial conflict in net/socket.c and non-trivial one in crypto -
that one had evaded aio_complete() removal.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-09 00:01:38 -04:00
Herbert Xu
016baaa118 crypto: user - Fix crypto_alg_match race
The function crypto_alg_match returns an algorithm without taking
any references on it.  This means that the algorithm can be freed
at any time, therefore all users of crypto_alg_match are buggy.

This patch fixes this by taking a reference count on the algorithm
to prevent such races.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-08 22:20:06 +08:00
Masanari Iida
1e6232f87b crypto: serpent_sse2 - Fix a typo in Kconfig
This patch fix a spelling typo in crypto/Kconfig.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-07 21:34:20 +08:00
Herbert Xu
87b1675634 crypto: api - Change crypto_unregister_instance argument type
This patch makes crypto_unregister_instance take a crypto_instance
instead of a crypto_alg.  This allows us to remove a duplicate
CRYPTO_ALG_INSTANCE check in crypto_unregister_instance.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-03 17:53:32 +08:00
Herbert Xu
1f72371099 crypto: api - Fix races in crypto_unregister_instance
There are multiple problems in crypto_unregister_instance:

1) The cra_refcnt BUG_ON check is racy and can cause crashes.
2) The cra_refcnt check shouldn't exist at all.
3) There is no reference on tmpl to protect the tmpl->free call.

This patch rewrites the function using crypto_remove_spawn which
now morphs into crypto_remove_instance.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-04-03 17:53:32 +08:00
tadeusz.struk@intel.com
033f46b3c1 crypto: algif - explicitly mark end of data
After the TX sgl is expanded we need to explicitly mark end of data
at the last buffer that contains data.

Changes in v2
 - use type 'bool' and true/false for 'mark'.

Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01 22:59:28 -04:00
Tadeusz Struk
82d929207a crypto: algif - use kmalloc instead of kzalloc
No need to use kzalloc to allocate sgls as the structure is initialized anyway.

Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01 15:32:35 -04:00
Tadeusz Struk
bd50752034 crypto: af_alg - make exports consistant
Use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL.

Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01 15:32:20 -04:00
Stephan Mueller
f52bbf55d1 crypto: mcryptd - process CRYPTO_ALG_INTERNAL
The mcryptd is used as a wrapper around internal ciphers. Therefore,
the mcryptd must process the internal cipher by marking mcryptd as
internal if the underlying cipher is an internal cipher.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-31 21:21:13 +08:00
Stephan Mueller
b0cda2ba18 crypto: proc - identify internal ciphers
With ciphers that now cannot be accessed via the kernel crypto API,
callers shall be able to identify the ciphers that are not callable. The
/proc/crypto file is added a boolean field identifying that such
internal ciphers.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-31 21:21:04 +08:00
Stephan Mueller
466a7b9e3e crypto: cryptd - process CRYPTO_ALG_INTERNAL
The cryptd is used as a wrapper around internal ciphers. Therefore, the
cryptd must process the internal cipher by marking cryptd as internal if
the underlying cipher is an internal cipher.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-31 21:21:04 +08:00
Stephan Mueller
425a882991 crypto: testmgr - use CRYPTO_ALG_INTERNAL
Allocate the ciphers irrespectively if they are marked as internal
or not. As all ciphers, including the internal ciphers will be
processed by the testmgr, it needs to be able to allocate those
ciphers.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-31 21:21:03 +08:00
Stephan Mueller
06ca7f68d4 crypto: api - prevent helper ciphers from being used
Several hardware related cipher implementations are implemented as
follows: a "helper" cipher implementation is registered with the
kernel crypto API.

Such helper ciphers are never intended to be called by normal users. In
some cases, calling them via the normal crypto API may even cause
failures including kernel crashes. In a normal case, the "wrapping"
ciphers that use the helpers ensure that these helpers are invoked
such that they cannot cause any calamity.

Considering the AF_ALG user space interface, unprivileged users can
call all ciphers registered with the crypto API, including these
helper ciphers that are not intended to be called directly. That
means, with AF_ALG user space may invoke these helper ciphers
and may cause undefined states or side effects.

To avoid any potential side effects with such helpers, the patch
prevents the helpers to be called directly. A new cipher type
flag is added: CRYPTO_ALG_INTERNAL. This flag shall be used
to mark helper ciphers. These ciphers can only be used if the
caller invoke the cipher with CRYPTO_ALG_INTERNAL in the type and
mask field.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-31 21:21:03 +08:00
tadeusz.struk@intel.com
ac110f4954 crypto: algif - fix warn: unsigned 'used' is never less than zero
Change type from unsigned long to int to fix an issue reported by kbuild robot:
crypto/algif_skcipher.c:596 skcipher_recvmsg_async() warn: unsigned 'used' is
never less than zero.

Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-25 11:44:18 -04:00
Tadeusz Struk
a596999b7d crypto: algif - change algif_skcipher to be asynchronous
The way the algif_skcipher works currently is that on sendmsg/sendpage it
builds an sgl for the input data and then on read/recvmsg it sends the job
for encryption putting the user to sleep till the data is processed.
This way it can only handle one job at a given time.
This patch changes it to be asynchronous by adding AIO support.

Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23 16:41:37 -04:00
Tadeusz Struk
66db37391d crypto: af_alg - Allow to link sgl
Allow to link af_alg sgls.

Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23 16:41:37 -04:00
Stephan Mueller
2ef4d5c43d crypto: algif_rng - zeroize buffer with random data
Due to the change to RNGs to always return zero in success case, the RNG
interface must zeroize the buffer with the length provided by the
caller.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-16 21:46:25 +11:00
Stephan Mueller
19e60e1392 crypto: testmgr - fix RNG return code enforcement
Due to the change to RNGs to always return zero in success case, the
invocation of the RNGs in the test manager must be updated as otherwise
the RNG self tests are not properly executed any more.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Alexander Bergmann <abergmann@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-13 21:37:15 +11:00
Ard Biesheuvel
652ccae5cc crypto: arm - move ARM specific Kconfig definitions to a dedicated file
This moves all Kconfig symbols defined in crypto/Kconfig that depend
on CONFIG_ARM to a dedicated Kconfig file in arch/arm/crypto, which is
where the code that implements those features resides as well.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-12 21:13:35 +11:00
Horia Geant?
007ee8dec6 crypto: tcrypt - fix uninit sg entries in test_acipher_speed
Commit 5be4d4c94b ("crypto: replace scatterwalk_sg_next with sg_next")
did not consider the fact that scatterwalk_sg_next() was looking at
sg entry length, while sg_next() looks at the "chained" sg bit.

This should have no effect in theory. However in practice, there are
cases where the sg table is initialized to a number of entries and
some of them are not properly configured. While scatterwalk_sg_next()
would have returned NULL (since sg length = 0 and sg page_link = 0),
sg_next() happily returns the next unconfigured sg entry.

insmod tcrypt.ko mode=500 sec=1

testing speed of async cbc(aes) (cbc-aes-talitos) encryption
test 0 (128 bit key, 16 byte blocks):
Unable to handle kernel paging request for data at address 0x00000000
Faulting instruction address: 0xc00d79e4
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=8 P1022 DS
Modules linked in: tcrypt(+) talitos
CPU: 0 PID: 2670 Comm: insmod Not tainted 4.0.0-rc1-QorIQ-SDK-V1.6+g904f1ca82209 #1
task: e8de3200 ti: e70bc000 task.ti: e70bc000
NIP: c00d79e4 LR: f92d223c CTR: c00d79c8
REGS: e70bda00 TRAP: 0300   Not tainted  (4.0.0-rc1-QorIQ-SDK-V1.6+g904f1ca82209)
MSR: 00029000 <CE,EE,ME>  CR: 84428f22  XER: 00000000
DEAR: 00000000 ESR: 00000000
GPR00: f92d223c e70bdab0 e8de3200 00000000 e70bdbb8 00000001 00000000 00000000
GPR08: 00000000 00000000 c08b0380 27282010 c00d79c8 1003a634 00000000 e70bdf1c
GPR16: e70bdef0 00000020 00000000 c08c0000 00000010 00000000 e70bdbb8 00000010
GPR24: e976d3a8 00000010 00000000 e70bdbd8 e8961010 00000001 c086e560 00000000
NIP [c00d79e4] page_address+0x1c/0x110
LR [f92d223c] talitos_map_sg+0x130/0x184 [talitos]
Call Trace:
[e70bdab0] [00000010] 0x10 (unreliable)
[e70bdad0] [f92d223c] talitos_map_sg+0x130/0x184 [talitos]
[e70bdb00] [f92d30d8] common_nonsnoop.constprop.13+0xc0/0x304 [talitos]
[e70bdb30] [f933fd90] test_acipher_speed+0x434/0x7dc [tcrypt]
[e70bdcc0] [f934318c] do_test+0x2478/0x306c [tcrypt]
[e70bdd80] [f11fe058] tcrypt_mod_init+0x58/0x100 [tcrypt]
[e70bdda0] [c0002354] do_one_initcall+0x90/0x1f4
[e70bde10] [c061fe00] do_init_module+0x60/0x1ac
[e70bde30] [c00a79f0] load_module+0x185c/0x1f88
[e70bdee0] [c00a82b0] SyS_finit_module+0x7c/0x98
[e70bdf40] [c000e8b0] ret_from_syscall+0x0/0x3c

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-12 01:11:05 +11:00
Aaro Koskinen
efdb6f6edb crypto: octeon - enable OCTEON SHA1/256/512 module selection
Enable user to select OCTEON SHA1/256/512 modules.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-10 20:49:34 +11:00
Stephan Mueller
cde001e4c3 crypto: rng - RNGs must return 0 in success case
Change the RNGs to always return 0 in success case.

This patch ensures that seqiv.c works with RNGs other than krng. seqiv
expects that any return code other than 0 is an error. Without the
patch, rfc4106(gcm(aes)) will not work when using a DRBG or an ANSI
X9.31 RNG.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-09 21:06:18 +11:00
Stephan Mueller
37821da088 crypto: drbg - remove superflowous memsets
The DRBG code contains memset(0) calls to initialize a varaible
that are not necessary as the variable is always overwritten by
the processing.

This patch increases the CTR and Hash DRBGs by about 5%.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-04 22:13:29 +13:00
Stephan Mueller
04bcbfcf7e crypto: drbg - use single block cipher API
The CTR DRBG only encrypts one single block at a time. Thus, use the
single block crypto API to avoid additional overhead from the block
chaining modes.

With the patch, the speed of the DRBG increases between 30% and 40%.

The DRBG still passes the CTR DRBG CAVS test.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-04 22:13:29 +13:00
Markus Stockhausen
e8e5995372 crypto: powerpc/md5 - kernel config
Integrate the module into the kernel config tree.

Signed-off-by: Markus Stockhausen <stockhausen@collogia.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-04 22:13:26 +13:00
Stephan Mueller
44cac4fce9 crypto: algif - enable AEAD interface compilation
Enable compilation of the AEAD AF_ALG support and provide a Kconfig
option to compile the AEAD AF_ALG support.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-04 22:12:39 +13:00
Stephan Mueller
400c40cf78 crypto: algif - add AEAD support
This patch adds the AEAD support for AF_ALG.

The implementation is based on algif_skcipher, but contains heavy
modifications to streamline the interface for AEAD uses.

To use AEAD, the user space consumer has to use the salg_type named
"aead".

The AEAD implementation includes some overhead to calculate the size of
the ciphertext, because the AEAD implementation of the kernel crypto API
makes implied assumption on the location of the authentication tag. When
performing an encryption, the tag will be added to the created
ciphertext (note, the tag is placed adjacent to the ciphertext). For
decryption, the caller must hand in the ciphertext with the tag appended
to the ciphertext. Therefore, the selection of the used memory
needs to add/subtract the tag size from the source/destination buffers
depending on the encryption type. The code is provided with comments
explaining when and how that operation is performed.

A fully working example using all aspects of AEAD is provided at
http://www.chronox.de/libkcapi.html

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-04 22:12:39 +13:00
Ying Xue
1b78414047 net: Remove iocb argument from sendmsg and recvmsg
After TIPC doesn't depend on iocb argument in its internal
implementations of sendmsg() and recvmsg() hooks defined in proto
structure, no any user is using iocb argument in them at all now.
Then we can drop the redundant iocb argument completely from kinds of
implementations of both sendmsg() and recvmsg() in the entire
networking stack.

Cc: Christoph Hellwig <hch@lst.de>
Suggested-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02 13:06:31 -05:00
Markus Stockhausen
d9850fc529 crypto: powerpc/sha1 - kernel config
Integrate the module into the kernel config tree.

Signed-off-by: Markus Stockhausen <stockhausen@collogia.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-02 23:22:20 +13:00
Markus Stockhausen
504c6143c5 crypto: powerpc/aes - kernel config
Integrate the module into the kernel configuration

Signed-off-by: Markus Stockhausen <stockhausen@collogia.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-01 23:02:29 +13:00
Markus Stockhausen
2ecc1e95ec crypto: ppc/sha256 - kernel config
Integrate the module into the kernel config tree.

Signed-off-by: Markus Stockhausen <stockhausen@collogia.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-02-27 22:48:47 +13:00
Linus Torvalds
fee5429e02 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
 "Here is the crypto update for 3.20:

   - Added 192/256-bit key support to aesni GCM.
   - Added MIPS OCTEON MD5 support.
   - Fixed hwrng starvation and race conditions.
   - Added note that memzero_explicit is not a subsitute for memset.
   - Added user-space interface for crypto_rng.
   - Misc fixes"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits)
  crypto: tcrypt - do not allocate iv on stack for aead speed tests
  crypto: testmgr - limit IV copy length in aead tests
  crypto: tcrypt - fix buflen reminder calculation
  crypto: testmgr - mark rfc4106(gcm(aes)) as fips_allowed
  crypto: caam - fix resource clean-up on error path for caam_jr_init
  crypto: caam - pair irq map and dispose in the same function
  crypto: ccp - terminate ccp_support array with empty element
  crypto: caam - remove unused local variable
  crypto: caam - remove dead code
  crypto: caam - don't emit ICV check failures to dmesg
  hwrng: virtio - drop extra empty line
  crypto: replace scatterwalk_sg_next with sg_next
  crypto: atmel - Free memory in error path
  crypto: doc - remove colons in comments
  crypto: seqiv - Ensure that IV size is at least 8 bytes
  crypto: cts - Weed out non-CBC algorithms
  MAINTAINERS: add linux-crypto to hw random
  crypto: cts - Remove bogus use of seqiv
  crypto: qat - don't need qat_auth_state struct
  crypto: algif_rng - fix sparse non static symbol warning
  ...
2015-02-14 09:47:01 -08:00
Linus Torvalds
9399f0c514 crypto: fix af_alg_make_sg() conversion to iov_iter
Commit 1d10eb2f15 ("crypto: switch af_alg_make_sg() to iov_iter")
broke af_alg_make_sg() and skcipher_recvmsg() in the process of moving
them to the iov_iter interfaces.  The 'npages' calculation in the formar
calculated the number of *bytes* in the pages, and in the latter case
the conversion didn't re-read the value of 'ctx->used' after waiting for
it to become non-zero.

This reverts to the original code for both these cases.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10 19:55:45 -08:00
Cristian Stoica
96692a7305 crypto: tcrypt - do not allocate iv on stack for aead speed tests
See also: 9bac019dad

Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-02-04 20:59:42 +11:00
Cristian Stoica
424a5da691 crypto: testmgr - limit IV copy length in aead tests
The working copy of IV is the same size as the transformation's IV.
It is not necessary to copy more than that from the template since
iv_len is usually less than MAX_IVLEN and the rest of the copied data
is garbage.

Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-02-04 20:59:41 +11:00
Cristian Stoica
c47689931f crypto: tcrypt - fix buflen reminder calculation
- This fixes the intent of the code to limit the last scatterlist to
  either a full PAGE or a fraction of it, depending on the number of
  pages needed by buflen and the available space advertised by XBUFLEN.

  The original code always sets the last scatterlist to a fraction of a
  PAGE because the first 'if' is never executed.

- Rearrange the second part of the code to remove the conditional from
  the loop

Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-02-04 20:59:41 +11:00
Al Viro
1d10eb2f15 crypto: switch af_alg_make_sg() to iov_iter
With that, all ->sendmsg() instances are converted to iov_iter primitives
and are agnostic wrt the kind of iov_iter they are working with.
So's the last remaining ->recvmsg() instance that wasn't kind-agnostic yet.
All ->sendmsg() and ->recvmsg() advance ->msg_iter by the amount actually
copied and none of them modifies the underlying iovec, etc.

Cc: linux-crypto@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-04 01:34:15 -05:00
Jarod Wilson
db71f29a1c crypto: testmgr - mark rfc4106(gcm(aes)) as fips_allowed
This gcm variant is popular for ipsec use, and there are folks who would
like to use it while in fips mode. Mark it with fips_allowed=1 to
facilitate that.

CC: LKML <linux-kernel@vger.kernel.org>
CC: Stephan Mueller <smueller@atsec.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Stephan Mueller <smueller@atsec.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-01-26 11:34:32 +11:00
Cristian Stoica
5be4d4c94b crypto: replace scatterwalk_sg_next with sg_next
Modify crypto drivers to use the generic SG helper since
both of them are equivalent and the one from crypto is redundant.

See also:
  468577abe3   reverted in
  b2ab4a57b0

Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-01-26 11:34:22 +11:00
Herbert Xu
c0ecf8916d crypto: seqiv - Ensure that IV size is at least 8 bytes
Since seqiv is designed for IPsec we need to be able to accomodate
the whole IPsec sequence number in order to ensure the uniqueness
of the IV.

This patch forbids any algorithm with an IV size of less than 8
from using it.  This should have no impact on existing users since
they all have an IV size of 8.

Reported-by: Maciej ?enczykowski <zenczykowski@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Maciej ?enczykowski <zenczykowski@gmail.com>
2015-01-20 14:44:16 +11:00
Herbert Xu
988dc01744 crypto: cts - Weed out non-CBC algorithms
The cts algorithm as currently implemented assumes the underlying
is a CBC-mode algorithm.  So this patch adds a check for that to
eliminate bogus combinations of cts with non-CBC modes.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-01-20 14:44:15 +11:00
Herbert Xu
0c5c8e646c crypto: cts - Remove bogus use of seqiv
The seqiv generator is completely inappropriate for cts as it's
designed for IPsec algorithms.  Since cts users do not actually
use the IV generator we can just fall back to the default.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Maciej ?enczykowski <zenczykowski@gmail.com>
2015-01-20 14:44:15 +11:00
Wei Yongjun
598de36952 crypto: algif_rng - fix sparse non static symbol warning
Fixes the following sparse warnings:

crypto/algif_rng.c:185:13: warning:
 symbol 'rng_exit' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Stephan Mueller <smueller@chronox.de>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-01-14 21:57:57 +11:00
Rabin Vincent
8a45ac12ec crypto: testmgr - don't use interruptible wait in tests
tcrypt/testmgr uses wait_for_completion_interruptible() everywhere when
it waits for a request to be completed.  If it's interrupted, then the
test is aborted and the request is freed.

However, if any of these calls actually do get interrupted, the result
will likely be a kernel crash, when the driver handles the now-freed
request.  Use wait_for_completion() instead.

Signed-off-by: Rabin Vincent <rabin.vincent@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-01-13 22:30:44 +11:00
Mathias Krause
3e14dcf7cb crypto: add missing crypto module aliases
Commit 5d26a105b5 ("crypto: prefix module autoloading with "crypto-"")
changed the automatic module loading when requesting crypto algorithms
to prefix all module requests with "crypto-". This requires all crypto
modules to have a crypto specific module alias even if their file name
would otherwise match the requested crypto algorithm.

Even though commit 5d26a105b5 added those aliases for a vast amount of
modules, it was missing a few. Add the required MODULE_ALIAS_CRYPTO
annotations to those files to make them get loaded automatically, again.
This fixes, e.g., requesting 'ecb(blowfish-generic)', which used to work
with kernels v3.18 and below.

Also change MODULE_ALIAS() lines to MODULE_ALIAS_CRYPTO(). The former
won't work for crypto modules any more.

Fixes: 5d26a105b5 ("crypto: prefix module autoloading with "crypto-"")
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-01-13 22:29:11 +11:00
Herbert Xu
1471f09f9b Revert "crypto: drbg - use memzero_explicit() for clearing sensitive data"
This reverts commit 421d82f5b3.

None of the data zeroed are on the stack so the compiler cannot
optimise them away.
    
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-01-05 10:44:09 +11:00
Stephan Mueller
2f3755381d crypto: algif_rng - enable RNG interface compilation
Enable compilation of the RNG AF_ALG support and provide a Kconfig
option to compile the RNG AF_ALG support.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-12-29 21:39:27 +11:00
Stephan Mueller
5afdfd22e6 crypto: algif_rng - add random number generator support
This patch adds the random number generator support for AF_ALG.

A random number generator's purpose is to generate data without
requiring the caller to provide any data. Therefore, the AF_ALG
interface handler for RNGs only implements a callback handler for
recvmsg.

The following parameters provided with a recvmsg are processed by the
RNG callback handler:

	* sock - to resolve the RNG context data structure accessing the
	  RNG instance private to the socket

	* len - this parameter allows userspace callers to specify how
	  many random bytes the RNG shall produce and return. As the
	  kernel context for the RNG allocates a buffer of 128 bytes to
	  store random numbers before copying them to userspace, the len
	  parameter is checked that it is not larger than 128. If a
	  caller wants more random numbers, a new request for recvmsg
	  shall be made.

The size of 128 bytes is chose because of the following considerations:

	* to increase the memory footprint of the kernel too much (note,
	  that would be 128 bytes per open socket)

	* 128 is divisible by any typical cryptographic block size an
	  RNG may have

	* A request for random numbers typically only shall supply small
	  amount of data like for keys or IVs that should only require
	  one invocation of the recvmsg function.

Note, during instantiation of the RNG, the code checks whether the RNG
implementation requires seeding. If so, the RNG is seeded with output
from get_random_bytes.

A fully working example using all aspects of the RNG interface is
provided at http://www.chronox.de/libkcapi.html

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-12-29 21:37:59 +11:00
Stephan Mueller
ad202c8c15 crypto: af_alg - zeroize key data
alg_setkey should zeroize the sensitive data after use.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-12-26 08:33:36 +11:00
Aaro Koskinen
d69e75deff crypto: octeon - enable OCTEON MD5 module selection
Enable user to select OCTEON MD5 module.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-12-24 08:14:24 +11:00
Tadeusz Struk
0f477b655a crypto: algif - Mark sgl end at the end of data
algif_skcipher sends 127 sgl buffers for encryption regardless of how
many buffers acctually have data to process, where the few first with
valid len and the rest with zero len. This is not very eficient.
This patch marks the last one with data as the last one to process.

Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-12-22 23:02:41 +11:00
Stephan Mueller
25fb8638e9 crypto: af_alg - add setsockopt for auth tag size
Use setsockopt on the tfm FD to provide the authentication tag size for
an AEAD cipher. This is achieved by adding a callback function which is
intended to be used by the AEAD AF_ALG implementation.

The optlen argument of the setsockopt specifies the authentication tag
size to be used with the AEAD tfm.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-12-22 23:02:37 +11:00
Stephan Mueller
905b42e559 crypto: drbg - panic on continuous self test error
This patch adds a panic if the FIPS 140-2 self test error failed.
Note, that entire code is only executed with fips_enabled (i.e. when the
kernel is booted with fips=1. It is therefore not executed for 99.9% of
all user base.

As mathematically such failure cannot occur, this panic should never be
triggered. But to comply with NISTs current requirements, an endless
loop must be replaced with the panic.

When the new version of FIPS 140 will be released, this entire
continuous self test function will be ripped out as it will not be
needed any more.

This patch is functionally equivalent as implemented in ansi_cprng.c and drivers/char/random.c.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-12-22 23:02:37 +11:00
Joshua I. James
0efcb8d5b2 crypto: api - fixed style erro in algapi.c
Fixed style error identified by checkpatch.

WARNING: Missing a blank line after declarations
+               int err = crypto_remove_alg(&inst->alg, &users);
+               BUG_ON(err);

Signed-off-by: Joshua I. James <joshua@cybercrimetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-12-22 23:02:37 +11:00
Joshua I. James
b516d51402 crypto: ahash - fixed style error in ahash.c
Fixed style error identified by checkpatch.

WARNING: Missing a blank line after declarations
+               unsigned int unaligned = alignmask + 1 - (offset & alignmask);
+               if (nbytes > unaligned)

Signed-off-by: Joshua I. James <joshua@cybercrimetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-12-22 23:02:36 +11:00
Joshua I. James
267c4221ff crypto: af_alg - fixed style error in af_alg.c
Fixed style error identified by checkpatch.

ERROR: space required before the open parenthesis '('
+               switch(cmsg->cmsg_type) {

Signed-off-by: Joshua I. James <joshua@cybercrimetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-12-22 23:02:36 +11:00
Joshua I. James
4fad478ae0 crypto: aead - fixed style error in aead.c
Fixed style error identified by checkpatch.

ERROR: do not use assignment in if condition
+       if ((err = crypto_register_instance(tmpl, inst))) {

Signed-off-by: Joshua I. James <joshua@cybercrimetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-12-22 23:02:35 +11:00
Joshua I. James
a861afbc93 crypto: ablkcipher - fixed style errors in ablkcipher.c
Fixed style errors reported by checkpatch.

WARNING: Missing a blank line after declarations
+       u8 *end_page = (u8 *)(((unsigned long)(start + len - 1)) & PAGE_MASK);
+       return max(start, end_page);

WARNING: line over 80 characters
+               scatterwalk_start(&walk->out, scatterwalk_sg_next(walk->out.sg));

WARNING: Missing a blank line after declarations
+               int err = ablkcipher_copy_iv(walk, tfm, alignmask);
+               if (err)

ERROR: do not use assignment in if condition
+       if ((err = crypto_register_instance(tmpl, inst))) {

Signed-off-by: Joshua I. James <joshua@cybercrimetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-12-22 23:02:35 +11:00
Rabin Vincent
7e77bdebff crypto: af_alg - fix backlog handling
If a request is backlogged, it's complete() handler will get called
twice: once with -EINPROGRESS, and once with the final error code.

af_alg's complete handler, unlike other users, does not handle the
-EINPROGRESS but instead always completes the completion that recvmsg()
is waiting on.  This can lead to a return to user space while the
request is still pending in the driver.  If userspace closes the sockets
before the requests are handled by the driver, this will lead to
use-after-frees (and potential crashes) in the kernel due to the tfm
having been freed.

The crashes can be easily reproduced (for example) by reducing the max
queue length in cryptod.c and running the following (from
http://www.chronox.de/libkcapi.html) on AES-NI capable hardware:

 $ while true; do kcapi -x 1 -e -c '__ecb-aes-aesni' \
    -k 00000000000000000000000000000000 \
    -p 00000000000000000000000000000000 >/dev/null & done

Cc: stable@vger.kernel.org
Signed-off-by: Rabin Vincent <rabin.vincent@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-12-22 22:53:55 +11:00
Linus Torvalds
e3aa91a7cb Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
 - The crypto API is now documented :)
 - Disallow arbitrary module loading through crypto API.
 - Allow get request with empty driver name through crypto_user.
 - Allow speed testing of arbitrary hash functions.
 - Add caam support for ctr(aes), gcm(aes) and their derivatives.
 - nx now supports concurrent hashing properly.
 - Add sahara support for SHA1/256.
 - Add ARM64 version of CRC32.
 - Misc fixes.

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (77 commits)
  crypto: tcrypt - Allow speed testing of arbitrary hash functions
  crypto: af_alg - add user space interface for AEAD
  crypto: qat - fix problem with coalescing enable logic
  crypto: sahara - add support for SHA1/256
  crypto: sahara - replace tasklets with kthread
  crypto: sahara - add support for i.MX53
  crypto: sahara - fix spinlock initialization
  crypto: arm - replace memset by memzero_explicit
  crypto: powerpc - replace memset by memzero_explicit
  crypto: sha - replace memset by memzero_explicit
  crypto: sparc - replace memset by memzero_explicit
  crypto: algif_skcipher - initialize upon init request
  crypto: algif_skcipher - removed unneeded code
  crypto: algif_skcipher - Fixed blocking recvmsg
  crypto: drbg - use memzero_explicit() for clearing sensitive data
  crypto: drbg - use MODULE_ALIAS_CRYPTO
  crypto: include crypto- module prefix in template
  crypto: user - add MODULE_ALIAS
  crypto: sha-mb - remove a bogus NULL check
  crytpo: qat - Fix 64 bytes requests
  ...
2014-12-13 13:33:26 -08:00
Gu Zheng
f95b414edb net: introduce helper macro for_each_cmsghdr
Introduce helper macro for_each_cmsghdr as a wrapper of the enumerating
cmsghdr from msghdr, just cleanup.

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10 22:41:55 -05:00
Al Viro
c0371da604 put iov_iter into msghdr
Note that the code _using_ ->msg_iter at that point will be very
unhappy with anything other than unshifted iovec-backed iov_iter.
We still need to convert users to proper primitives.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-09 16:29:03 -05:00
Herbert Xu
8606813a6c crypto: tcrypt - Allow speed testing of arbitrary hash functions
This patch allows the testing of arbitrary hash functions specified
by the alg module parameter by using them in mode 300 (for sync hash)
and mode 400 (for async hash).

For example, you could do
	modprobe tcrypt mode=300 alg='vmac(aes)'

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-12-05 23:57:47 +08:00
Stephan Mueller
af8e80731a crypto: af_alg - add user space interface for AEAD
AEAD requires the caller to specify the following information separate
from the data stream. This information allows the AEAD interface handler
to identify the AAD, ciphertext/plaintext and the authentication tag:

        * Associated authentication data of arbitrary length and
          length

        * Length of authentication tag for encryption

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-12-05 23:56:55 +08:00
Stephan Mueller
f26b7b8052 crypto: algif_skcipher - initialize upon init request
When using the algif_skcipher, the following call sequence causess a
re-initialization:

1. sendmsg with ALG_SET_OP and iov == NULL, iovlen == 0 (i.e
initializing the cipher, but not sending data)

2. sendmsg with msg->msg-controllen == 0 and iov != NULL (using the initalized
cipher handle by sending data)

In step 2, the cipher operation type (encryption or decryption) is reset
to always decryption, because the local variable of enc is put into
ctx->enc as ctx->user is still zero.

The same applies when all send data is processed and ctx->used falls to
zero followed by user space to send new data.

This patch changes the behavior to only reset the cipher operation type
(and the IV) if such configuration request is received.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-12-02 22:55:46 +08:00
Struk, Tadeusz
9ba0905f17 crypto: algif_skcipher - removed unneeded code
Remover unneeded code.

Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-12-01 22:42:48 +08:00
Herbert Xu
1e104f9a25 crypto: algif_skcipher - Fixed blocking recvmsg
As most (all?) users of algif_skcipher are single-threaded and
therefore always write before reading from an algif_skcipher
socket, they never block and exercise that code-path.

It turns out that code path doesn't even work because we never
reload ctx->used after waking up so we never even see the new
data and immediately return an error (and a loud WARN_ON).

This patch fixes this by always reloading ctx->used.

Reported-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Stephan Mueller <smueller@chronox.de>
2014-11-28 23:33:18 +08:00
Nickolaus Woodruff
421d82f5b3 crypto: drbg - use memzero_explicit() for clearing sensitive data
Compiler dead store optimization can sometimes remove final calls
to memset() used to clear sensitive data at the end of a function.
Replace trailing memset() calls with memzero_explicit() to
preclude unwanted removal.

Signed-off-by: Nickolaus Woodruff <nickolauswoodruff@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-11-27 22:26:18 +08:00
Stephan Mueller
0653a7cf6f crypto: drbg - use MODULE_ALIAS_CRYPTO
Use the crypto- prefix for the DRBG implementations.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-11-26 20:06:30 +08:00
Kees Cook
4943ba16bb crypto: include crypto- module prefix in template
This adds the module loading prefix "crypto-" to the template lookup
as well.

For example, attempting to load 'vfat(blowfish)' via AF_ALG now correctly
includes the "crypto-" prefix at every level, correctly rejecting "vfat":

	net-pf-38
	algif-hash
	crypto-vfat(blowfish)
	crypto-vfat(blowfish)-all
	crypto-vfat

Reported-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-11-26 20:06:30 +08:00
Stephan Mueller
476c7fe20f crypto: user - add MODULE_ALIAS
To allow automatic loading of the crypto_user kernel module, the netlink
MODULE_ALIAS is added.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-11-26 20:06:29 +08:00
Daniel Borkmann
79e886599e crypto: algif - add and use sock_kzfree_s() instead of memzero_explicit()
Commit e1bd95bf7c ("crypto: algif - zeroize IV buffer") and
2a6af25bef ("crypto: algif - zeroize message digest buffer")
added memzero_explicit() calls on buffers that are later on
passed back to sock_kfree_s().

This is a discussed follow-up that, instead, extends the sock
API and adds sock_kzfree_s(), which internally uses kzfree()
instead of kfree() for passing the buffers back to slab.

Having sock_kzfree_s() allows to keep the changes more minimal
by just having a drop-in replacement instead of adding
memzero_explicit() calls everywhere before sock_kfree_s().

In kzfree(), the compiler is not allowed to optimize the memset()
away and thus there's no need for memzero_explicit(). Both,
sock_kfree_s() and sock_kzfree_s() are wrappers for
__sock_kfree_s() and call into kfree() resp. kzfree(); here,
__sock_kfree_s() needs to be explicitly inlined as we want the
compiler to optimize the call and condition away and thus it
produces e.g. on x86_64 the _same_ assembler output for
sock_kfree_s() before and after, and thus also allows for
avoiding code duplication.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-11-25 22:50:39 +08:00
Kees Cook
5d26a105b5 crypto: prefix module autoloading with "crypto-"
This prefixes all crypto module loading with "crypto-" so we never run
the risk of exposing module auto-loading to userspace via a crypto API,
as demonstrated by Mathias Krause:

https://lkml.org/lkml/2013/3/4/70

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-11-24 22:43:57 +08:00
Herbert Xu
5d4a5e770d crypto: user - Allow get request with empty driver name
Currently all get requests with an empty driver name fail with
EINVAL.  Since most users actually want to supply an empty driver
name this patch removes this check.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-11-24 22:41:52 +08:00
Al Viro
7eab8d9e8a new helper: memcpy_to_msg()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-24 04:28:51 -05:00
Al Viro
6ce8e9ce59 new helper: memcpy_from_msg()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-24 04:28:48 -05:00
Stephan Mueller
e1bd95bf7c crypto: algif - zeroize IV buffer
Zeroize the buffer holding the IV used for the completed
cipher operation before the buffer is released by the
skcipher AF_ALG interface handler.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-11-12 22:14:31 +08:00
Stephan Mueller
2a6af25bef crypto: algif - zeroize message digest buffer
Zeroize the buffer holding the message digest calculated for the
consumer before the buffer is released by the hash AF_ALG interface
handler.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-11-12 22:14:31 +08:00
Herbert Xu
4c7912e919 Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux
Merging 3.18-rc4 in order to pick up the memzero_explicit helper.
2014-11-12 22:11:15 +08:00
Stephan Mueller
62b62b6e5c crypto: drbg - add MODULE_ALIAS for all DRBG types
The kernel module drbg.ko is currently not loaded automatically when a
DRBG is requested by a consumer. This is due to missing MODULE_ALIAS
flags for each of the implemented DRBG types.

This patch adds aliases for each of the 22 defined DRBGs.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-11-10 22:09:00 +08:00
Linus Torvalds
14d4cc0883 This adds a memzero_explicit() call which is guaranteed not to be
optimized away by GCC.  This is important when we are wiping
 cryptographically sensitive material.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJUQTmuAAoJENNvdpvBGATwFToP/jOGL/Z5NE7Oa33jC+oRDdEC
 6gDXi27emzkll5BsxRLOR26vxXZ9AsBBI+U9pmhy64pcSUSxocTIZ+Bh0bx/LQyd
 w6HTTTYFk9GNtQCGrxRoNBPLdH/qz83ClvlWmpjsYpIEFfSOU3YncygSbps3uSeZ
 tdXiI5G1zZNGrljQrL+roJCZX5TP4XxHFbdUjeyV9Z8210oYTwCfpzHjg9+D24f0
 rwTOHa0Lp6IrecU4Vlq4PFP+y4/ZdYYVwnpyX5UtTHP3QP176PcrwvnAl4Ys/8Lx
 9uqj+gNrUnC6KHsSKhUxwMq9Ch7nu6iLLAYuIUMvxZargsmbNQFShHZyu2mwDgko
 bp+oTw8byOQyv6g/hbFpTVwfwpiv/AGu8VxmG3ORGqndOldTh+oQ9xMnuBZA8sXX
 PxHxEUY9hr66nVFg4iuxT/2KJJA+Ol8ARkB0taCWhwavzxXJeedEVEw5nbtQxRsM
 AJGxjBsAgSw7SJD03yAQH5kRGYvIdv03JRbIiMPmKjlP+pl1JkzOAPhVMUD+24vI
 x6oFpSa5FH5utlt3nCZuxlOYBuWhWKIhUzEoY2HwCsyISQScPcwL9EP15sWceY5i
 8+Wylvf+yqGVU3KopCBBV/oX3Wm/kj1A8OP/4Kk8UHw9k2btjYETYayhP1DHKnIt
 /4pr4+oGd5GlFOHRteXp
 =i29U
 -----END PGP SIGNATURE-----

Merge tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random

Pull /dev/random updates from Ted Ts'o:
 "This adds a memzero_explicit() call which is guaranteed not to be
  optimized away by GCC.  This is important when we are wiping
  cryptographically sensitive material"

* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  crypto: memzero_explicit - make sure to clear out sensitive data
  random: add and use memzero_explicit() for clearing data
2014-10-24 12:33:32 -07:00
Stephan Mueller
41a84982a1 crypto: drbg - use crypto_inc
The DRBG internal buffer addition function is replaced with crypto_inc when
a buffer is to be incremented by one.

The function drbg_add_buf is moved to the CONFIG_CRYPTO_DRBG_HASH ifdef
area as it is now only needed for the Hash DRBG.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-10-24 22:49:36 +08:00
Masanari Iida
3e8cffd431 crypto: testmgr - Remove unnecessary KERN_INFO from testmgr.c
This patch remove unncessary KERN_INFO from pr_info within testmgr.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-10-24 22:49:36 +08:00
Daniel Borkmann
7185ad2672 crypto: memzero_explicit - make sure to clear out sensitive data
Recently, in commit 13aa93c70e71 ("random: add and use memzero_explicit()
for clearing data"), we have found that GCC may optimize some memset()
cases away when it detects a stack variable is not being used anymore
and going out of scope. This can happen, for example, in cases when we
are clearing out sensitive information such as keying material or any
e.g. intermediate results from crypto computations, etc.

With the help of Coccinelle, we can figure out and fix such occurences
in the crypto subsytem as well. Julia Lawall provided the following
Coccinelle program:

  @@
  type T;
  identifier x;
  @@

  T x;
  ... when exists
      when any
  -memset
  +memzero_explicit
     (&x,
  -0,
     ...)
  ... when != x
      when strict

  @@
  type T;
  identifier x;
  @@

  T x[...];
  ... when exists
      when any
  -memset
  +memzero_explicit
     (x,
  -0,
     ...)
  ... when != x
      when strict

Therefore, make use of the drop-in replacement memzero_explicit() for
exactly such cases instead of using memset().

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-10-17 11:44:07 -04:00
Jan-Simon Möller
4c5c302494 crypto: LLVMLinux: Remove VLAIS usage from crypto/testmgr.c
Replaced the use of a Variable Length Array In Struct (VLAIS) with a C99
compliant equivalent. This patch allocates the appropriate amount of memory
using a char array using the SHASH_DESC_ON_STACK macro.

The new code can be compiled with both gcc and clang.

Signed-off-by: Jan-Simon Möller <dl9pf@gmx.de>
Signed-off-by: Behan Webster <behanw@converseincode.com>
Reviewed-by: Mark Charlebois <charlebm@gmail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: pageexec@freemail.hu
2014-10-14 10:51:24 +02:00
Jan-Simon Möller
ffb32e973e crypto: LLVMLinux: Remove VLAIS usage from crypto/hmac.c
Replaced the use of a Variable Length Array In Struct (VLAIS) with a C99
compliant equivalent. This patch allocates the appropriate amount of memory
using a char array using the SHASH_DESC_ON_STACK macro.

The new code can be compiled with both gcc and clang.

Signed-off-by: Jan-Simon Möller <dl9pf@gmx.de>
Signed-off-by: Behan Webster <behanw@converseincode.com>
Reviewed-by: Mark Charlebois <charlebm@gmail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: pageexec@freemail.hu
2014-10-14 10:51:23 +02:00
Linus Torvalds
5e40d331bd Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris.

Mostly ima, selinux, smack and key handling updates.

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (65 commits)
  integrity: do zero padding of the key id
  KEYS: output last portion of fingerprint in /proc/keys
  KEYS: strip 'id:' from ca_keyid
  KEYS: use swapped SKID for performing partial matching
  KEYS: Restore partial ID matching functionality for asymmetric keys
  X.509: If available, use the raw subjKeyId to form the key description
  KEYS: handle error code encoded in pointer
  selinux: normalize audit log formatting
  selinux: cleanup error reporting in selinux_nlmsg_perm()
  KEYS: Check hex2bin()'s return when generating an asymmetric key ID
  ima: detect violations for mmaped files
  ima: fix race condition on ima_rdwr_violation_check and process_measurement
  ima: added ima_policy_flag variable
  ima: return an error code from ima_add_boot_aggregate()
  ima: provide 'ima_appraise=log' kernel option
  ima: move keyring initialization to ima_init()
  PKCS#7: Handle PKCS#7 messages that contain no X.509 certs
  PKCS#7: Better handling of unsupported crypto
  KEYS: Overhaul key identification when searching for asymmetric keys
  KEYS: Implement binary asymmetric key ID handling
  ...
2014-10-12 10:13:55 -04:00
Linus Torvalds
87d7bcee4f Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
 - add multibuffer infrastructure (single_task_running scheduler helper,
   OKed by Peter on lkml.
 - add SHA1 multibuffer implementation for AVX2.
 - reenable "by8" AVX CTR optimisation after fixing counter overflow.
 - add APM X-Gene SoC RNG support.
 - SHA256/SHA512 now handles unaligned input correctly.
 - set lz4 decompressed length correctly.
 - fix algif socket buffer allocation failure for 64K page machines.
 - misc fixes

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (47 commits)
  crypto: sha - Handle unaligned input data in generic sha256 and sha512.
  Revert "crypto: aesni - disable "by8" AVX CTR optimization"
  crypto: aesni - remove unused defines in "by8" variant
  crypto: aesni - fix counter overflow handling in "by8" variant
  hwrng: printk replacement
  crypto: qat - Removed unneeded partial state
  crypto: qat - Fix typo in name of tasklet_struct
  crypto: caam - Dynamic allocation of addresses for various memory blocks in CAAM.
  crypto: mcryptd - Fix typos in CRYPTO_MCRYPTD description
  crypto: algif - avoid excessive use of socket buffer in skcipher
  arm64: dts: add random number generator dts node to APM X-Gene platform.
  Documentation: rng: Add X-Gene SoC RNG driver documentation
  hwrng: xgene - add support for APM X-Gene SoC RNG support
  crypto: mv_cesa - Add missing #define
  crypto: testmgr - add test for lz4 and lz4hc
  crypto: lz4,lz4hc - fix decompression
  crypto: qat - Use pci_enable_msix_exact() instead of pci_enable_msix()
  crypto: drbg - fix maximum value checks on 32 bit systems
  crypto: drbg - fix sparse warning for cpu_to_be[32|64]
  crypto: sha-mb - sha1_mb_alg_state can be static
  ...
2014-10-08 06:44:48 -04:00
Linus Torvalds
536fd93d43 Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
 "Included in these updates are:
   - Performance optimisation to avoid writing the control register at
     every exception.
   - Use static inline instead of extern inline in ftrace code.
   - Crypto ARM assembly updates for big endian
   - Alignment of initrd/.init memory to page sizes when freeing to
     ensure that we fully free the regions
   - Add gcov support
   - A couple of preparatory patches for VDSO support: use
     _install_special_mapping, and randomize the sigpage placement above
     stack.
   - Add L2 ePAPR DT cache properties so that DT can specify the cache
     geometry.
   - Preparatory patch for FIQ (NMI) kernel C code for things like
     spinlock lockup debug.  Following on from this are a couple of my
     patches cleaning up show_regs() and removing an unused (probably
     since 1.x days) do_unexp_fiq() function.
   - Use pr_warn() rather than pr_warning().
   - A number of cleanups (smp, footbridge, return_address)"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (21 commits)
  ARM: 8167/1: extend the reserved memory for initrd to be page aligned
  ARM: 8168/1: extend __init_end to a page align address
  ARM: 8169/1: l2c: parse cache properties from ePAPR definitions
  ARM: 8160/1: drop warning about return_address not using unwind tables
  ARM: 8161/1: footbridge: select machine dir based on ARCH_FOOTBRIDGE
  ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h
  ARM: 8155/1: place sigpage at a random offset above stack
  ARM: 8154/1: use _install_special_mapping for sigpage
  ARM: 8153/1: Enable gcov support on the ARM architecture
  ARM: Avoid writing to control register on every exception
  ARM: 8152/1: Convert pr_warning to pr_warn
  ARM: remove unused do_unexp_fiq() function
  ARM: remove extraneous newline in show_regs()
  ARM: 8150/3: fiq: Replace default FIQ handler
  ARM: 8140/1: ep93xx: Enable DEBUG_LL_UART_PL01X
  ARM: 8139/1: versatile: Enable DEBUG_LL_UART_PL01X
  ARM: 8138/1: drop ISAR0 workaround for B15
  ARM: 8136/1: sa1100: add Micro ASIC platform device
  ARM: 8131/1: arm/smp: Absorb boot_secondary()
  ARM: 8126/1: crypto: enable NEON SHA-384/SHA-512 for big endian
  ...
2014-10-08 05:30:03 -04:00
Linus Torvalds
d0cd84817c dmaengine-3.17
1/ Step down as dmaengine maintainer see commit 08223d80df "dmaengine
    maintainer update"
 
 2/ Removal of net_dma, as it has been marked 'broken' since 3.13 (commit
    7787380336 "net_dma: mark broken"), without reports of performance
    regression.
 
 3/ Miscellaneous fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUKDLKAAoJEB7SkWpmfYgC7wwP/iNHqRjf1suMUTBIF3P6Hgbe
 VCUwh0IkuujMPDG46WRn6cYzarRxVPLoGaLHLPszgjI6pmGPVv19wqeDOlUxtcmr
 0iQWEWv/zqseaAIW+4gj/WYCyMgKil49EUBJKCZCfNmIaad+e0pr8f0uE5yOkHPM
 tqWoZERu9A4dlXGr1TjeOZVzdnPrCt92MrLDN6ZZ6tMuJaEc5PauaLxKTeGy5fYj
 UB+k1xJQzECbsYfpB+uCVYl5/qPO1rNyuBYS8THCsW+JYmrbbfH2kkF2lo2FaUpO
 8Yd50FtzXHKWwAt7BzfIwU2M7x0wRmryrC/xsQi6M+WmVeHYvvHUIpzaA66xRZ5x
 fCy3Fu8sEnmnmboAbh2v2c5uTycqRl2xPzbpLAuxglloXIxzi3ckp6ESF/Z4SldH
 oxIoEievN7lah3vKgvlHZYcWDzrYr8EKf/EzFe9RqDBQDKtzDzre1H9Uivr387Vm
 uFUcGHYG/GXuX47C7EUsMtaSW2UEoR2ytw/HR6CKFPTVXwAzEO6kA9vg0EqL0iIq
 2wVLgavlZuwegmaUBgnr+bgVZMvVN7OU7fAIRVe5xNO6itrPKvheSlQthmRiiq9C
 uzOu4PS6PexqzHUNPCcJpCsj+lawmCSrE0bxtPzTA/CQInVgWs219V9+W5Gn/0YA
 EARN9k6ueX9PZPQrPQLm
 =BBBv
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine

Pull dmaengine updates from Dan Williams:
 "Even though this has fixes marked for -stable, given the size and the
  needed conflict resolutions this is 3.18-rc1/merge-window material.

  These patches have been languishing in my tree for a long while.  The
  fact that I do not have the time to do proper/prompt maintenance of
  this tree is a primary factor in the decision to step down as
  dmaengine maintainer.  That and the fact that the bulk of drivers/dma/
  activity is going through Vinod these days.

  The net_dma removal has not been in -next.  It has developed simple
  conflicts against mainline and net-next (for-3.18).

  Continuing thanks to Vinod for staying on top of drivers/dma/.

  Summary:

   1/ Step down as dmaengine maintainer see commit 08223d80df
      "dmaengine maintainer update"

   2/ Removal of net_dma, as it has been marked 'broken' since 3.13
      (commit 7787380336 "net_dma: mark broken"), without reports of
      performance regression.

   3/ Miscellaneous fixes"

* tag 'dmaengine-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine:
  net: make tcp_cleanup_rbuf private
  net_dma: revert 'copied_early'
  net_dma: simple removal
  dmaengine maintainer update
  dmatest: prevent memory leakage on error path in thread
  ioat: Use time_before_jiffies()
  dmaengine: fix xor sources continuation
  dma: mv_xor: Rename __mv_xor_slot_cleanup() to mv_xor_slot_cleanup()
  dma: mv_xor: Remove all callers of mv_xor_slot_cleanup()
  dma: mv_xor: Remove unneeded mv_xor_clean_completed_slots() call
  ioat: Use pci_enable_msix_exact() instead of pci_enable_msix()
  drivers: dma: Include appropriate header file in dca.c
  drivers: dma: Mark functions as static in dma_v3.c
  dma: mv_xor: Add DMA API error checks
  ioat/dca: Use dev_is_pci() to check whether it is pci device
2014-10-07 20:39:25 -04:00
Dmitry Kasatkin
d401658985 KEYS: output last portion of fingerprint in /proc/keys
Previous version of KEYS used to output last 4 bytes of fingerprint.
Now it outputs 8 last bytes of raw subject, which does not make any
visual meaning at all. This patch restores old behavior.

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2014-10-06 17:33:27 +01:00
Dmitry Kasatkin
7a224e783a KEYS: strip 'id:' from ca_keyid
The 'id:' prefix must be stripped for asymmetric_key_hex_to_key_id() to be
able to process ca_keyid.

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2014-10-06 17:33:27 +01:00
Dmitry Kasatkin
8dd609805b KEYS: use swapped SKID for performing partial matching
Earlier KEYS code used pure subject key identifiers (fingerprint)
for searching keys. Latest merged code removed that and broke
compatibility with integrity subsytem signatures and original
format of module signatures.

This patch returns back partial matching on SKID.

Reported-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2014-10-06 16:56:08 +01:00
Dmitry Kasatkin
f1b731dbc2 KEYS: Restore partial ID matching functionality for asymmetric keys
Bring back the functionality whereby an asymmetric key can be matched with a
partial match on one of its IDs.

Whilst we're at it, allow for the possibility of having an increased number of
IDs.

Reported-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2014-10-06 15:21:05 +01:00
David Howells
dd2f6c4481 X.509: If available, use the raw subjKeyId to form the key description
Module signing matches keys by comparing against the key description exactly.
However, the way the key description gets constructed got changed to be
composed of the subject name plus the certificate serial number instead of the
subject name and the subjectKeyId.  I changed this to avoid problems with
certificates that don't *have* a subjectKeyId.

Instead, if available, use the raw subjectKeyId to form the key description
and only use the serial number if the subjectKeyId doesn't exist.

Reported-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2014-10-03 16:17:02 +01:00
Dmitry Kasatkin
40b50e80c5 KEYS: handle error code encoded in pointer
If hexlen is odd then function returns an error.
Use IS_ERR to check for error, otherwise invalid pointer
is used and kernel gives oops:

[  132.816522] BUG: unable to handle kernel paging request at
ffffffffffffffea
[  132.819902] IP: [<ffffffff812bfc20>] asymmetric_key_id_same+0x14/0x36
[  132.820302] PGD 1a12067 PUD 1a14067 PMD 0
[  132.820302] Oops: 0000 [#1] SMP
[  132.820302] Modules linked in: bridge(E) stp(E) llc(E) evdev(E)
serio_raw(E) i2c_piix4(E) button(E) fuse(E)
[  132.820302] CPU: 0 PID: 2993 Comm: cat Tainted: G            E
3.16.0-kds+ #2847
[  132.820302] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[  132.820302] task: ffff88004249a430 ti: ffff880056640000 task.ti:
ffff880056640000
[  132.820302] RIP: 0010:[<ffffffff812bfc20>]  [<ffffffff812bfc20>]
asymmetric_key_id_same+0x14/0x36
[  132.820302] RSP: 0018:ffff880056643930  EFLAGS: 00010246
[  132.820302] RAX: 0000000000000000 RBX: ffffffffffffffea RCX:
ffff880056643ae0
[  132.820302] RDX: 000000000000005e RSI: ffffffffffffffea RDI:
ffff88005bac9300
[  132.820302] RBP: ffff880056643948 R08: 0000000000000003 R09:
00000007504aa01a
[  132.820302] R10: 0000000000000000 R11: 0000000000000000 R12:
ffff88005d68ca40
[  132.820302] R13: 0000000000000101 R14: 0000000000000000 R15:
ffff88005bac5280
[  132.820302] FS:  00007f67a153c740(0000) GS:ffff88005da00000(0000)
knlGS:0000000000000000
[  132.820302] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  132.820302] CR2: ffffffffffffffea CR3: 000000002e663000 CR4:
00000000000006f0
[  132.820302] Stack:
[  132.820302]  ffffffff812bfc66 ffff880056643ae0 ffff88005bac5280
ffff880056643958
[  132.820302]  ffffffff812bfc9d ffff880056643980 ffffffff812971d9
ffff88005ce930c1
[  132.820302]  ffff88005ce930c0 0000000000000000 ffff8800566439c8
ffffffff812fb753
[  132.820302] Call Trace:
[  132.820302]  [<ffffffff812bfc66>] ? asymmetric_match_key_ids+0x24/0x42
[  132.820302]  [<ffffffff812bfc9d>] asymmetric_key_cmp+0x19/0x1b
[  132.820302]  [<ffffffff812971d9>] keyring_search_iterator+0x74/0xd7
[  132.820302]  [<ffffffff812fb753>] assoc_array_subtree_iterate+0x67/0xd2
[  132.820302]  [<ffffffff81297165>] ? key_default_cmp+0x20/0x20
[  132.820302]  [<ffffffff812fbaa1>] assoc_array_iterate+0x19/0x1e
[  132.820302]  [<ffffffff81297332>] search_nested_keyrings+0xf6/0x2b6
[  132.820302]  [<ffffffff810728da>] ? sched_clock_cpu+0x91/0xa2
[  132.820302]  [<ffffffff810860d2>] ? mark_held_locks+0x58/0x6e
[  132.820302]  [<ffffffff810a137d>] ? current_kernel_time+0x77/0xb8
[  132.820302]  [<ffffffff81297871>] keyring_search_aux+0xe1/0x14c
[  132.820302]  [<ffffffff812977fc>] ? keyring_search_aux+0x6c/0x14c
[  132.820302]  [<ffffffff8129796b>] keyring_search+0x8f/0xb6
[  132.820302]  [<ffffffff812bfc84>] ? asymmetric_match_key_ids+0x42/0x42
[  132.820302]  [<ffffffff81297165>] ? key_default_cmp+0x20/0x20
[  132.820302]  [<ffffffff812ab9e3>] asymmetric_verify+0xa4/0x214
[  132.820302]  [<ffffffff812ab90e>] integrity_digsig_verify+0xb1/0xe2
[  132.820302]  [<ffffffff812abe41>] ? evm_verifyxattr+0x6a/0x7a
[  132.820302]  [<ffffffff812b0390>] ima_appraise_measurement+0x160/0x370
[  132.820302]  [<ffffffff81161db2>] ? d_absolute_path+0x5b/0x7a
[  132.820302]  [<ffffffff812ada30>] process_measurement+0x322/0x404

Reported-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2014-10-03 13:41:51 +01:00
Russell King
d5d1689224 Merge branches 'fiq' (early part), 'fixes', 'l2c' (early part) and 'misc' into for-next 2014-10-02 21:47:02 +01:00
David S. Miller
be34c4ef69 crypto: sha - Handle unaligned input data in generic sha256 and sha512.
Like SHA1, use get_unaligned_be*() on the raw input data.

Reported-by: Bob Picco <bob.picco@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-10-02 14:52:37 +08:00
James Morris
6c8ff877cd Merge commit 'v3.16' into next 2014-10-01 00:44:04 +10:00
David Howells
d1ac554045 KEYS: Check hex2bin()'s return when generating an asymmetric key ID
As it stands, the code to generate an asymmetric key ID prechecks the hex
string it is given whilst determining the length, before it allocates the
buffer for hex2bin() to translate into - which mean that checking the result of
hex2bin() is redundant.

Unfortunately, hex2bin() is marked as __must_check, which means that the
following warning may be generated if the return value isn't checked:

	crypto/asymmetric_keys/asymmetric_type.c: In function
	asymmetric_key_hex_to_key_id:
	crypto/asymmetric_keys/asymmetric_type.c:110: warning: ignoring return
	value of hex2bin, declared with attribute warn_unused_result

The warning can't be avoided by casting the result to void.

Instead, use strlen() to check the length of the string and ignore the fact
that the string might not be entirely valid hex until after the allocation has
been done - in which case we can use the result of hex2bin() for this.

Signed-off-by: David Howells <dhowells@redhat.com>
2014-09-22 00:02:01 +01:00
David Howells
757932e6da PKCS#7: Handle PKCS#7 messages that contain no X.509 certs
The X.509 certificate list in a PKCS#7 message is optional.  To save space, we
can omit the inclusion of any X.509 certificates if we are sure that we can
look the relevant public key up by the serial number and issuer given in a
signed info block.

This also supports use of a signed info block for which we can't find a
matching X.509 cert in the certificate list, though it be populated.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 17:36:17 +01:00
David Howells
4155942000 PKCS#7: Better handling of unsupported crypto
Provide better handling of unsupported crypto when verifying a PKCS#7 message.
If we can't bridge the gap between a pair of X.509 certs or between a signed
info block and an X.509 cert because it involves some crypto we don't support,
that's not necessarily the end of the world as there may be other ways points
at which we can intersect with a ring of trusted keys.

Instead, only produce ENOPKG immediately if all the signed info blocks in a
PKCS#7 message require unsupported crypto to bridge to the first X.509 cert.
Otherwise, we defer the generation of ENOPKG until we get ENOKEY during trust
validation.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 17:36:15 +01:00
David Howells
46963b774d KEYS: Overhaul key identification when searching for asymmetric keys
Make use of the new match string preparsing to overhaul key identification
when searching for asymmetric keys.  The following changes are made:

 (1) Use the previously created asymmetric_key_id struct to hold the following
     key IDs derived from the X.509 certificate or PKCS#7 message:

	id: serial number + issuer
	skid: subjKeyId + subject
	authority: authKeyId + issuer

 (2) Replace the hex fingerprint attached to key->type_data[1] with an
     asymmetric_key_ids struct containing the id and the skid (if present).

 (3) Make the asymmetric_type match data preparse select one of two searches:

     (a) An iterative search for the key ID given if prefixed with "id:".  The
     	 prefix is expected to be followed by a hex string giving the ID to
     	 search for.  The criterion key ID is checked against all key IDs
     	 recorded on the key.

     (b) A direct search if the key ID is not prefixed with "id:".  This will
     	 look for an exact match on the key description.

 (4) Make x509_request_asymmetric_key() take a key ID.  This is then converted
     into "id:<hex>" and passed into keyring_search() where match preparsing
     will turn it back into a binary ID.

 (5) X.509 certificate verification then takes the authority key ID and looks
     up a key that matches it to find the public key for the certificate
     signature.

 (6) PKCS#7 certificate verification then takes the id key ID and looks up a
     key that matches it to find the public key for the signed information
     block signature.

Additional changes:

 (1) Multiple subjKeyId and authKeyId values on an X.509 certificate cause the
     cert to be rejected with -EBADMSG.

 (2) The 'fingerprint' ID is gone.  This was primarily intended to convey PGP
     public key fingerprints.  If PGP is supported in future, this should
     generate a key ID that carries the fingerprint.

 (3) Th ca_keyid= kernel command line option is now converted to a key ID and
     used to match the authority key ID.  Possibly this should only match the
     actual authKeyId part and not the issuer as well.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 17:36:13 +01:00
David Howells
7901c1a8ef KEYS: Implement binary asymmetric key ID handling
Implement the first step in using binary key IDs for asymmetric keys rather
than hex string keys.

The previously added match data preparsing will be able to convert hex
criterion strings into binary which can then be compared more rapidly.

Further, we actually want more then one ID string per public key.  The problem
is that X.509 certs refer to other X.509 certs by matching Issuer + AuthKeyId
to Subject + SubjKeyId, but PKCS#7 messages match against X.509 Issuer +
SerialNumber.

This patch just provides facilities for a later patch to make use of.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 17:36:11 +01:00
David Howells
0c903ab64f KEYS: Make the key matching functions return bool
Make the key matching functions pointed to by key_match_data::cmp return bool
rather than int.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 17:36:08 +01:00
David Howells
c06cfb08b8 KEYS: Remove key_type::match in favour of overriding default by match_preparse
A previous patch added a ->match_preparse() method to the key type.  This is
allowed to override the function called by the iteration algorithm.
Therefore, we can just set a default that simply checks for an exact match of
the key description with the original criterion data and allow match_preparse
to override it as needed.

The key_type::match op is then redundant and can be removed, as can the
user_match() function.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 17:36:06 +01:00
David Howells
614d8c3901 KEYS: Remove key_type::def_lookup_type
Remove key_type::def_lookup_type as it's no longer used.  The information now
defaults to KEYRING_SEARCH_LOOKUP_DIRECT but may be overridden by
type->match_preparse().

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 17:36:04 +01:00
David Howells
462919591a KEYS: Preparse match data
Preparse the match data.  This provides several advantages:

 (1) The preparser can reject invalid criteria up front.

 (2) The preparser can convert the criteria to binary data if necessary (the
     asymmetric key type really wants to do binary comparison of the key IDs).

 (3) The preparser can set the type of search to be performed.  This means
     that it's not then a one-off setting in the key type.

 (4) The preparser can set an appropriate comparator function.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 17:36:02 +01:00
David Howells
1c9c115ccc Keyrings fixes for next
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAVBhgQROxKuMESys7AQJv8w/+O61++U9OT5rL/X2pam3h4+tQmM7+2rU6
 rml9ZADkqKJVU1h3tT/WaFcmwR6J56buIWDZ7M7fPPRyvQPhfeBEHcakey+4iCd3
 SyFmP9ElkRvdOyoXRvImNIawsmnyme4CWSIQihSteyzyuV76odOI5HiJxMj6x8RV
 T4bjTsOMYugleWmuJzYPSniAs0my7Gxii7GK4WnLd+Jhxs8xJxiB3DNT4Kecxjuc
 MTldJIx32+Kj2JKp4ygbHM/WOI7jbdpseCedxbL4DNepgdXvVvV42pwPSCc2ydO/
 2b9kF+YnhsGbOv3Qd6GPPE5x0cMLKcmGf3DvJQcfCFSLjqpginGr0V/ylkVSf79S
 mQJLc2R7Z0ST7eFCyvClAeM9ZI6y+APWqo2wvVRNMww3NQhHyj43P2HPXiQEAryg
 UO6ZQehGHgxcx8uN/nB1gi4+S7+sZS6SzwvrTu04h5lYfCRrKSZGWDGpG/n7qtwo
 EKcWiAjupYbJtlDryL5Nz1xxkD6rpLKWbVfkO5FbJ8yAamz5XDl7FiQyJTu32LGj
 jbVma9sEIkJ5IB4mCAdF2tHi4o7QvQQbwWAPLu0B4hxp4JRslV5XhVVAH3CrvIFK
 l8A5nit0NwHms7d8+VLAyieknUForFHlmRheYXCSMvJDMfFToZrCNmTNHxZtyuuj
 voCrpkQYxGU=
 =9AZW
 -----END PGP SIGNATURE-----

Merge tag 'keys-next-fixes-20140916' into keys-next

Merge in keyrings fixes for next:

 (1) Insert some missing 'static' annotations.

Signed-off-by: David Howells <dhowells@redhat.com>
2014-09-16 17:32:55 +01:00
David Howells
68c45c7fea Keyrings fixes
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAVBhlXROxKuMESys7AQIQghAAmxHRD9kD7AJrlcL187gTXl5dRyxQNhX0
 myT9A1/01jHJh6mPPKS5jt5ooenwfcbvBkdUARLNLq6j7urIzFk+UtSmfcN1OMXw
 3y15nuJKbSCZRzPMR94Z0Ik23YED9dmc4ubxW7E+psoWWIZUvFt4GaGw7ei77O39
 8Pbt/n7nIx2+s8aiXte2Om/zqzyMEmcLd3Mzlqxe4GX1jo/ThNQZ348EL+ECxJEl
 3OKe7i7oRfa48+SybmhW5Bx/2f/aQMcIQX04+akOFMIC505rUg6CTzphcrTyV5/s
 6FdQexRquf8/Ei/6DMAYPhnumRfWJ5x9txiNSEY4i11AIjo6Bt65vaLPuNniYRNI
 b6Wn8SSE8Ucrq5RrmNlSmoJCs7r1NE+JdOaEPO0MDVkOouaja8daISmveV2AfZfF
 bITOQgEw3QRpyL2FYdwa39/NXCONBILfL5HvNyXEfPEHBhI8igTgEyXYRwNHV9jT
 dsVFTc9ZIrjksLt3CDh4Z8xdyZbyojYdRCfH/wna9aAkZpwwGfSYCcR3dE6SK26y
 IjkqEVJoCFHEnvLUQkAQrc/2qWX2D1qHrcjVLwzwbM5G66YIPeLcJlZK2FbiY0Ay
 Yc/kUJY0hU5W+TfFb1hhjO5G2DTTw8Ou6MGcxSTE3HwzqICjDhE7BwFZdVikHRP0
 xMtjfJnMwuM=
 =v+dv
 -----END PGP SIGNATURE-----

Merge tag 'keys-fixes-20140916' into keys-next

Merge in keyrings fixes, at least some of which later patches depend on:

 (1) Reinstate the production of EPERM for key types beginning with '.' in
     requests from userspace.

 (2) Tidy up the cleanup of PKCS#7 message signed information blocks and fix a
     bug this made more obvious.

Signed-off-by: David Howells <dhowells@redhat.coM>
2014-09-16 17:32:16 +01:00
David Howells
cecf5d2e12 PKCS#7: Fix the parser cleanup to drain parsed out X.509 certs
Fix the parser cleanup code to drain parsed out X.509 certs in the case that
the decode fails and we jump to error_decode.

The function is rearranged so that the same cleanup code is used in the success
case as the error case - just that the message descriptor under construction is
only released if it is still pointed to by the context struct at that point.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 17:29:03 +01:00
David Howells
3cd0920cde PKCS#7: Provide a single place to do signed info block freeing
The code to free a signed info block is repeated several times, so move the
code to do it into a function of its own.  This gives us a place to add clean
ups for stuff that gets added to pkcs7_signed_info.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 17:29:03 +01:00
David Howells
15155b9a45 PKCS#7: Add a missing static
Add a missing static (found by checker).

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 17:07:07 +01:00
Linus Torvalds
3630056d96 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
 "This fixes the newly added drbg generator so that it actually works on
  32-bit machines.  Previously the code was only tested on 64-bit and on
  32-bit it overflowed and simply doesn't work"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: drbg - remove check for uninitialized DRBG handle
  crypto: drbg - backport "fix maximum value checks on 32 bit systems"
2014-09-15 07:23:21 -07:00
Herbert Xu
ea2d9fc1af Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Merging the crypto tree for 3.17 in order to resolve the conflict
on the 32-bit DRBG overflow fix.
2014-09-05 16:11:43 +08:00
Stephan Mueller
78f543a934 crypto: drbg - remove check for uninitialized DRBG handle
The drbg_healthcheck() contained a test to call the DRBG with an
uninitialized DRBG cipher handle. As this is an inappropriate use of the
kernel crypto API to try to generate random numbers before
initialization, checks verifying for an initialized DRBG have been
removed in previous patches.

Now, the drbg_healthcheck test must also be removed.

Changes V2: Added patch marker to email subject line.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-09-05 15:56:43 +08:00
Ted Percival
0e56673b7b crypto: mcryptd - Fix typos in CRYPTO_MCRYPTD description
Signed-off-by: Ted Percival <ted@tedp.id.au>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-09-04 15:18:21 +08:00
Ondrej Kozina
e2cffb5f49 crypto: algif - avoid excessive use of socket buffer in skcipher
On archs with PAGE_SIZE >= 64 KiB the function skcipher_alloc_sgl()
fails with -ENOMEM no matter what user space actually requested.
This is caused by the fact sock_kmalloc call inside the function tried
to allocate more memory than allowed by the default kernel socket buffer
size (kernel param net.core.optmem_max).

Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-09-04 15:07:10 +08:00
David Howells
c3ce6dfa48 KEYS: Set pr_fmt() in asymmetric key signature handling
Printing in base signature handling should have a prefix, so set pr_fmt().

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2014-09-03 11:08:45 +10:00
David Howells
0aa0409401 PEFILE: Relax the check on the length of the PKCS#7 cert
Relax the check on the length of the PKCS#7 cert as it appears that the PE
file wrapper size gets rounded up to the nearest 8.

The debugging output looks like this:

	PEFILE: ==> verify_pefile_signature()
	PEFILE: ==> pefile_parse_binary()
	PEFILE: checksum @ 110
	PEFILE: header size = 200
	PEFILE: cert = 968 @547be0 [68 09 00 00 00 02 02 00 30 82 09 56 ]
	PEFILE: sig wrapper = { 968, 200, 2 }
	PEFILE: Signature data not PKCS#7

The wrapper is the first 8 bytes of the hex dump inside [].  This indicates a
length of 0x968 bytes, including the wrapper header - so 0x960 bytes of
payload.

The ASN.1 wrapper begins [ ... 30 82 09 56 ].  That indicates an object of size
0x956 - a four byte discrepency, presumably just padding for alignment
purposes.

So we just check that the ASN.1 container is no bigger than the payload and
reduce the recorded size appropriately.

Whilst we're at it, allow shorter PKCS#7 objects that manage to squeeze within
127 or 255 bytes.  It's just about conceivable if no X.509 certs are included
in the PKCS#7 message.

Reported-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Peter Jones <pjones@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2014-09-03 10:30:24 +10:00
David Howells
876c6e3e02 KEYS: Fix public_key asymmetric key subtype name
The length of the name of an asymmetric key subtype must be stored in struct
asymmetric_key_subtype::name_len so that it can be matched by a search for
"<subkey_name>:<partial_fingerprint>".  Fix the public_key subtype to have
name_len set.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2014-09-03 10:27:28 +10:00
KOVACS Krisztian
1443cc9bcb crypto: testmgr - add test for lz4 and lz4hc
This patch adds a simple test vector for the lz4 and lz4hc compression
algorithms.

Signed-off-by: KOVACS Krisztian <hidden@sch.bme.hu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-08-29 21:46:36 +08:00
KOVACS Krisztian
d801ab204b crypto: lz4,lz4hc - fix decompression
The lz4 library has two functions for decompression, with slightly
different signatures and behaviour. The lz4_decompress_crypto() function
seemed to be using the one that assumes that the decompressed length is
known in advance.

This patch switches to the other decompression function and makes sure
that the length of the decompressed output is properly returned to the
caller.

The same issue was present in the lz4hc algorithm.

Coincidentally, this change also makes very basic lz4 and lz4hc
compression tests in testmgr pass.

Signed-off-by: KOVACS Krisztian <hidden@sch.bme.hu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-08-29 21:46:35 +08:00
Ard Biesheuvel
31e1a602b9 ARM: 8126/1: crypto: enable NEON SHA-384/SHA-512 for big endian
The SHA-512 NEON works just fine under big endian, so remove the Kconfig
condition preventing it from being selected if CONFIG_CPU_BIG_ENDIAN is
set.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-08-27 15:44:12 +01:00