Reduce size of duplicated comments by switching to use SPDX identifier.
No functional change.
While here, correct MODULE_LICENSE() string to be aligned with license text.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We were relying on the interrupt being shared with the ACPI SCI and the
ACPI core calling irq_set_wake. But that does not always happen on
Bay Trail devices, so we should do it ourselves.
This fixes wake from USB not working on various Bay Trail devices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The intel_int0002_vgpio driver was added to avoid an IRQ 9 storm on Cherry
Trail platforms.
When originally merged the CPU ID for Bay Trail SoCs was commented out
of the list of valid CPU IDs because we did not have any reports of the
IRQ storm on Bay Trail platforms.
We now have a report of the IRQ 9 storm on the Bay Trail based Thinkpad
Tablet 10 which is fixed by enabling this driver, so lets enable it on
Bay Trail too.
I've tested various other Bay Trail device with this driver enabled
without adverse side-effects.
BugLink: https://www.dpin.de/nf/finally-s0i3-is-there-thinkpad-tablet-10-sleeps-deeply-with-linux-kernel-4-15rc/#comments
Reported-and-tested-by: Nicole Faerber <nicole@id3p.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Remove the IRQF_NO_THREAD irq flag, there is no need for it and it breaks
irq-sharing with the "acpi" irq when passing "threadirqs" on the kernel
cmdline, as the acpi/osl.c code does not pass IRQF_NO_THREAD.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
In order to consolidate the multiple ways to associate an IRQ chip with
a GPIO chip, move more fields into the new struct gpio_irq_chip.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In order to consolidate the multiple ways to associate an IRQ chip with
a GPIO chip, move more fields into the new struct gpio_irq_chip.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some peripherals on Bay Trail and Cherry Trail platforms signal a
Power Management Event (PME) to the Power Management Controller (PMC)
to wakeup the system. When this happens software needs to explicitly
clear the PME bus 0 status bit in the GPE0a_STS register to avoid an
IRQ storm on IRQ 9.
This is modelled in ACPI through the INT0002 ACPI device, which is
called a "Virtual GPIO controller" in ACPI because it defines the
event handler to call when the PME triggers through _AEI and _L02
methods as would be done for a real GPIO interrupt in ACPI.
This commit adds a driver which registers the Virtual GPIOs expected
by the DSDT on these devices, letting gpiolib-acpi claim the
virtual GPIO and install a GPIO-interrupt handler which call the _L02
handler as it would for a real GPIO controller.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
