Commit graph

201 commits

Author SHA1 Message Date
Daniel Borkmann
3f2050e20e bpf, samples: add test cases for raw stack
This adds test cases mostly around ARG_PTR_TO_RAW_STACK to check the
verifier behaviour.

  [...]
  #84 raw_stack: no skb_load_bytes OK
  #85 raw_stack: skb_load_bytes, no init OK
  #86 raw_stack: skb_load_bytes, init OK
  #87 raw_stack: skb_load_bytes, spilled regs around bounds OK
  #88 raw_stack: skb_load_bytes, spilled regs corruption OK
  #89 raw_stack: skb_load_bytes, spilled regs corruption 2 OK
  #90 raw_stack: skb_load_bytes, spilled regs + data OK
  #91 raw_stack: skb_load_bytes, invalid access 1 OK
  #92 raw_stack: skb_load_bytes, invalid access 2 OK
  #93 raw_stack: skb_load_bytes, invalid access 3 OK
  #94 raw_stack: skb_load_bytes, invalid access 4 OK
  #95 raw_stack: skb_load_bytes, invalid access 5 OK
  #96 raw_stack: skb_load_bytes, invalid access 6 OK
  #97 raw_stack: skb_load_bytes, large access OK
  Summary: 98 PASSED, 0 FAILED

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 21:40:42 -04:00
Daniel Borkmann
02413cabd6 bpf, samples: don't zero data when not needed
Remove the zero initialization in the sample programs where appropriate.
Note that this is an optimization which is now possible, old programs
still doing the zero initialization are just fine as well. Also, make
sure we don't have padding issues when we don't memset() the entire
struct anymore.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14 21:40:42 -04:00
David S. Miller
ae95d71261 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2016-04-09 17:41:41 -04:00
Alexei Starovoitov
e3edfdec04 samples/bpf: add tracepoint vs kprobe performance tests
the first microbenchmark does
fd=open("/proc/self/comm");
for() {
  write(fd, "test");
}
and on 4 cpus in parallel:
                                      writes per sec
base (no tracepoints, no kprobes)         930k
with kprobe at __set_task_comm()          420k
with tracepoint at task:task_rename       730k

For kprobe + full bpf program manully fetches oldcomm, newcomm via bpf_probe_read.
For tracepint bpf program does nothing, since arguments are copied by tracepoint.

2nd microbenchmark does:
fd=open("/dev/urandom");
for() {
  read(fd, buf);
}
and on 4 cpus in parallel:
                                       reads per sec
base (no tracepoints, no kprobes)         300k
with kprobe at urandom_read()             279k
with tracepoint at random:urandom_read    290k

bpf progs attached to kprobe and tracepoint are noop.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07 21:04:27 -04:00
Alexei Starovoitov
3c9b16448c samples/bpf: tracepoint example
modify offwaketime to work with sched/sched_switch tracepoint
instead of kprobe into finish_task_switch

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07 21:04:27 -04:00
Alexei Starovoitov
c07660409e samples/bpf: add tracepoint support to bpf loader
Recognize "tracepoint/" section name prefix and attach the program
to that tracepoint.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07 21:04:27 -04:00
Naveen N. Rao
138d6153a1 samples/bpf: Enable powerpc support
Add the necessary definitions for building bpf samples on ppc.

Since ppc doesn't store function return address on the stack, modify how
PT_REGS_RET() and PT_REGS_FP() work.

Also, introduce PT_REGS_IP() to access the instruction pointer.

Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-06 16:01:29 -04:00
Naveen N. Rao
128d1514be samples/bpf: Use llc in PATH, rather than a hardcoded value
While at it, remove the generation of .s files and fix some typos in the
related comment.

Cc: Alexei Starovoitov <ast@fb.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-06 16:01:28 -04:00
Naveen N. Rao
77e63534d6 samples/bpf: Fix build breakage with map_perf_test_user.c
Building BPF samples is failing with the below error:

samples/bpf/map_perf_test_user.c: In function ‘main’:
samples/bpf/map_perf_test_user.c:134:9: error: variable ‘r’ has
initializer but incomplete type
  struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY};
         ^
samples/bpf/map_perf_test_user.c:134:21: error: ‘RLIM_INFINITY’
undeclared (first use in this function)
  struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY};
                     ^
samples/bpf/map_perf_test_user.c:134:21: note: each undeclared
identifier is reported only once for each function it appears in
samples/bpf/map_perf_test_user.c:134:9: warning: excess elements in
struct initializer [enabled by default]
  struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY};
         ^
samples/bpf/map_perf_test_user.c:134:9: warning: (near initialization
for ‘r’) [enabled by default]
samples/bpf/map_perf_test_user.c:134:9: warning: excess elements in
struct initializer [enabled by default]
samples/bpf/map_perf_test_user.c:134:9: warning: (near initialization
for ‘r’) [enabled by default]
samples/bpf/map_perf_test_user.c:134:16: error: storage size of ‘r’
isn’t known
  struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY};
                ^
samples/bpf/map_perf_test_user.c:139:2: warning: implicit declaration of
function ‘setrlimit’ [-Wimplicit-function-declaration]
  setrlimit(RLIMIT_MEMLOCK, &r);
  ^
samples/bpf/map_perf_test_user.c:139:12: error: ‘RLIMIT_MEMLOCK’
undeclared (first use in this function)
  setrlimit(RLIMIT_MEMLOCK, &r);
            ^
samples/bpf/map_perf_test_user.c:134:16: warning: unused variable ‘r’
[-Wunused-variable]
  struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY};
                ^
make[2]: *** [samples/bpf/map_perf_test_user.o] Error 1

Fix this by including the necessary header file.

Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-06 16:01:28 -04:00
Alexei Starovoitov
26e9093110 samples/bpf: add map performance test
performance tests for hash map and per-cpu hash map
with and without pre-allocation

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 23:22:03 -05:00
Alexei Starovoitov
7dcc42b685 samples/bpf: stress test bpf_get_stackid
increase stress by also calling bpf_get_stackid() from
various *spin* functions

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 23:22:02 -05:00
Alexei Starovoitov
9d8b612d88 samples/bpf: add bpf map stress test
this test calls bpf programs from different contexts:
from inside of slub, from rcu, from pretty much everywhere,
since it kprobes all spin_lock functions.
It stresses the bpf hash and percpu map pre-allocation,
deallocation logic and call_rcu mechanisms.
User space part adding more stress by walking and deleting map elements.

Note that due to nature bpf_load.c the earlier kprobe+bpf programs are
already active while loader loads new programs, creates new kprobes and
attaches them.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 23:22:02 -05:00
Alexei Starovoitov
c3f85cffc5 samples/bpf: test both pre-alloc and normal maps
extend test coveraged to include pre-allocated and run-time alloc maps

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 15:28:32 -05:00
Alexei Starovoitov
89b9760701 samples/bpf: add map_flags to bpf loader
note old loader is compatible with new kernel.
map_flags are optional

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 15:28:32 -05:00
Alexei Starovoitov
3622e7e493 samples/bpf: move ksym_search() into library
move ksym search from offwaketime into library to be reused
in other tests

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 15:28:32 -05:00
Alexei Starovoitov
618ec9a7b1 samples/bpf: make map creation more verbose
map creation is typically the first one to fail when rlimits are
too low, not enough memory, etc
Make this failure scenario more verbose

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08 15:28:32 -05:00
Alexei Starovoitov
a6ffe7b9df samples/bpf: offwaketime example
This is simplified version of Brendan Gregg's offwaketime:
This program shows kernel stack traces and task names that were blocked and
"off-CPU", along with the stack traces and task names for the threads that woke
them, and the total elapsed time from when they blocked to when they were woken
up. The combined stacks, task names, and total time is summarized in kernel
context for efficiency.

Example:
$ sudo ./offwaketime | flamegraph.pl > demo.svg
Open demo.svg in the browser as FlameGraph visualization.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-20 00:21:44 -05:00
Alexei Starovoitov
3059303f59 samples/bpf: update tracex[23] examples to use per-cpu maps
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-06 03:34:36 -05:00
tom.leiming@gmail.com
df570f5772 samples/bpf: unit test for BPF_MAP_TYPE_PERCPU_ARRAY
A sanity test for BPF_MAP_TYPE_PERCPU_ARRAY

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-06 03:34:36 -05:00
Martin KaFai Lau
e155967179 samples/bpf: unit test for BPF_MAP_TYPE_PERCPU_HASH
A sanity test for BPF_MAP_TYPE_PERCPU_HASH.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-06 03:34:36 -05:00
Linus Torvalds
7f151f1d8a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Fix list tests in netfilter ingress support, from Florian Westphal.

 2) Fix reversal of input and output interfaces in ingress hook
    invocation, from Pablo Neira Ayuso.

 3) We have a use after free in r8169, caught by Dave Jones, fixed by
    Francois Romieu.

 4) Splice use-after-free fix in AF_UNIX frmo Hannes Frederic Sowa.

 5) Three ipv6 route handling bug fixes from Martin KaFai Lau:
    a) Don't create clone routes not managed by the fib6 tree
    b) Don't forget to check expiration of DST_NOCACHE routes.
    c) Handle rt->dst.from == NULL properly.

 6) Several AF_PACKET fixes wrt transport header setting and SKB
    protocol setting, from Daniel Borkmann.

 7) Fix thunder driver crash on shutdown, from Pavel Fedin.

 8) Several Mellanox driver fixes (max MTU calculations, use of correct
    DMA unmap in TX path, etc.) from Saeed Mahameed, Tariq Toukan, Doron
    Tsur, Achiad Shochat, Eran Ben Elisha, and Noa Osherovich.

 9) Several mv88e6060 DSA driver fixes (wrong bit definitions for
    certain registers, etc.) from Neil Armstrong.

10) Make sure to disable preemption while updating per-cpu stats of ip
    tunnels, from Jason A.  Donenfeld.

11) Various ARM64 bpf JIT fixes, from Yang Shi.

12) Flush icache properly in ARM JITs, from Daniel Borkmann.

13) Fix masking of RX and TX interrupts in ravb driver, from Masaru
    Nagai.

14) Fix netdev feature propagation for devices not implementing
    ->ndo_set_features().  From Nikolay Aleksandrov.

15) Big endian fix in vmxnet3 driver, from Shrikrishna Khare.

16) RAW socket code increments incorrect SNMP counters, fix from Ben
    Cartwright-Cox.

17) IPv6 multicast SNMP counters are bumped twice, fix from Neil Horman.

18) Fix handling of VLAN headers on stacked devices when REORDER is
    disabled.  From Vlad Yasevich.

19) Fix SKB leaks and use-after-free in ipvlan and macvlan drivers, from
    Sabrina Dubroca.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits)
  MAINTAINERS: Update Mellanox's Eth NIC driver entries
  net/core: revert "net: fix __netdev_update_features return.." and add comment
  af_unix: take receive queue lock while appending new skb
  rtnetlink: fix frame size warning in rtnl_fill_ifinfo
  net: use skb_clone to avoid alloc_pages failure.
  packet: Use PAGE_ALIGNED macro
  packet: Don't check frames_per_block against negative values
  net: phy: Use interrupts when available in NOLINK state
  phy: marvell: Add support for 88E1540 PHY
  arm64: bpf: make BPF prologue and epilogue align with ARM64 AAPCS
  macvlan: fix leak in macvlan_handle_frame
  ipvlan: fix use after free of skb
  ipvlan: fix leak in ipvlan_rcv_frame
  vlan: Do not put vlan headers back on bridge and macvlan ports
  vlan: Fix untag operations of stacked vlans with REORDER_HEADER off
  via-velocity: unconditionally drop frames with bad l2 length
  ipg: Remove ipg driver
  dl2k: Add support for IP1000A-based cards
  snmp: Remove duplicate OUTMCAST stat increment
  net: thunder: Check for driver data in nicvf_remove()
  ...
2015-11-17 13:52:59 -08:00
Yang Shi
30b50aa612 bpf: samples: exclude asm/sysreg.h for arm64
commit 338d4f49d6
("arm64: kernel: Add support for Privileged Access Never") includes sysreg.h
into futex.h and uaccess.h. But, the inline assembly used by asm/sysreg.h is
incompatible with llvm so it will cause BPF samples build failure for ARM64.
Since sysreg.h is useless for BPF samples, just exclude it from Makefile via
defining __ASM_SYSREG_H.

Signed-off-by: Yang Shi <yang.shi@linaro.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-16 14:40:49 -05:00
Linus Torvalds
9aa3d651a9 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger:
 "This series contains HCH's changes to absorb configfs attribute
  ->show() + ->store() function pointer usage from it's original
  tree-wide consumers, into common configfs code.

  It includes usb-gadget, target w/ drivers, netconsole and ocfs2
  changes to realize the improved simplicity, that now renders the
  original include/target/configfs_macros.h CPP magic for fabric drivers
  and others, unnecessary and obsolete.

  And with common code in place, new configfs attributes can be added
  easier than ever before.

  Note, there are further improvements in-flight from other folks for
  v4.5 code in configfs land, plus number of target fixes for post -rc1
  code"

In the meantime, a new user of the now-removed old configfs API came in
through the char/misc tree in commit 7bd1d4093c ("stm class: Introduce
an abstraction for System Trace Module devices").

This merge resolution comes from Alexander Shishkin, who updated his stm
class tracing abstraction to account for the removal of the old
show_attribute and store_attribute methods in commit 517982229f
("configfs: remove old API") from this pull.  As Alexander says about
that patch:

 "There's no need to keep an extra wrapper structure per item and the
  awkward show_attribute/store_attribute item ops are no longer needed.

  This patch converts policy code to the new api, all the while making
  the code quite a bit smaller and easier on the eyes.

  Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>"

That patch was folded into the merge so that the tree should be fully
bisectable.

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (23 commits)
  configfs: remove old API
  ocfs2/cluster: use per-attribute show and store methods
  ocfs2/cluster: move locking into attribute store methods
  netconsole: use per-attribute show and store methods
  target: use per-attribute show and store methods
  spear13xx_pcie_gadget: use per-attribute show and store methods
  dlm: use per-attribute show and store methods
  usb-gadget/f_serial: use per-attribute show and store methods
  usb-gadget/f_phonet: use per-attribute show and store methods
  usb-gadget/f_obex: use per-attribute show and store methods
  usb-gadget/f_uac2: use per-attribute show and store methods
  usb-gadget/f_uac1: use per-attribute show and store methods
  usb-gadget/f_mass_storage: use per-attribute show and store methods
  usb-gadget/f_sourcesink: use per-attribute show and store methods
  usb-gadget/f_printer: use per-attribute show and store methods
  usb-gadget/f_midi: use per-attribute show and store methods
  usb-gadget/f_loopback: use per-attribute show and store methods
  usb-gadget/ether: use per-attribute show and store methods
  usb-gadget/f_acm: use per-attribute show and store methods
  usb-gadget/f_hid: use per-attribute show and store methods
  ...
2015-11-13 20:04:17 -08:00
Linus Torvalds
22402cd0af Most of the changes are clean ups and small fixes. Some of them have
stable tags to them. I searched through my INBOX just as the merge window
 opened and found lots of patches to pull. I ran them through all my tests
 and they were in linux-next for a few days.
 
 Features added this release:
 ----------------------------
 
  o Module globbing. You can now filter function tracing to several
    modules. # echo '*:mod:*snd*' > set_ftrace_filter (Dmitry Safonov)
 
  o Tracer specific options are now visible even when the tracer is not
    active. It was rather annoying that you can only see and modify tracer
    options after enabling the tracer. Now they are in the options/ directory
    even when the tracer is not active. Although they are still only visible
    when the tracer is active in the trace_options file.
 
  o Trace options are now per instance (although some of the tracer specific
    options are global)
 
  o New tracefs file: set_event_pid. If any pid is added to this file, then
    all events in the instance will filter out events that are not part of
    this pid. sched_switch and sched_wakeup events handle next and the wakee
    pids.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWPLQ5AAoJEKKk/i67LK/8CTYIAI1u8DE5QCzv3J0p54jVpNVR
 J5FqEU3eXIzd6FS4JXD4nxCeMpUZAy21YnhlZpsnrbJJM5bc9bUsBCwiKKM+MuSZ
 ztmy2sgYKkO0h/KUdhNgYJrzis3/Ojquyx9iAqK5ST/Fr+nKYx81akFKjNK53iur
 RJRut45sSa8rv11LaL8sgJ6hAWQTc+YkybUdZ5xaMdJmZ6A61T7Y6VzTjbUexuvL
 hntCfTjYLtVd8dbfknAnf3B7n/VOO3IFF85wr7ciYR5oEVfPrF8tHmJBlhHExPpX
 kaXAiDDRY/UTg/5DQqnp4zmxJoR5BQ2l4pT5PwiLcnwhcphIDNYS8EYUmOYAWjU=
 =TjOE
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracking updates from Steven Rostedt:
 "Most of the changes are clean ups and small fixes.  Some of them have
  stable tags to them.  I searched through my INBOX just as the merge
  window opened and found lots of patches to pull.  I ran them through
  all my tests and they were in linux-next for a few days.

  Features added this release:
  ----------------------------

   - Module globbing.  You can now filter function tracing to several
     modules.  # echo '*:mod:*snd*' > set_ftrace_filter (Dmitry Safonov)

   - Tracer specific options are now visible even when the tracer is not
     active.  It was rather annoying that you can only see and modify
     tracer options after enabling the tracer.  Now they are in the
     options/ directory even when the tracer is not active.  Although
     they are still only visible when the tracer is active in the
     trace_options file.

   - Trace options are now per instance (although some of the tracer
     specific options are global)

   - New tracefs file: set_event_pid.  If any pid is added to this file,
     then all events in the instance will filter out events that are not
     part of this pid.  sched_switch and sched_wakeup events handle next
     and the wakee pids"

* tag 'trace-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (68 commits)
  tracefs: Fix refcount imbalance in start_creating()
  tracing: Put back comma for empty fields in boot string parsing
  tracing: Apply tracer specific options from kernel command line.
  tracing: Add some documentation about set_event_pid
  ring_buffer: Remove unneeded smp_wmb() before wakeup of reader benchmark
  tracing: Allow dumping traces without tracking trace started cpus
  ring_buffer: Fix more races when terminating the producer in the benchmark
  ring_buffer: Do no not complete benchmark reader too early
  tracing: Remove redundant TP_ARGS redefining
  tracing: Rename max_stack_lock to stack_trace_max_lock
  tracing: Allow arch-specific stack tracer
  recordmcount: arm64: Replace the ignored mcount call into nop
  recordmcount: Fix endianness handling bug for nop_mcount
  tracepoints: Fix documentation of RCU lockdep checks
  tracing: ftrace_event_is_function() can return boolean
  tracing: is_legal_op() can return boolean
  ring-buffer: rb_event_is_commit() can return boolean
  ring-buffer: rb_per_cpu_empty() can return boolean
  ring_buffer: ring_buffer_empty{cpu}() can return boolean
  ring-buffer: rb_is_reader_page() can return boolean
  ...
2015-11-06 13:30:20 -08:00
Daniel Borkmann
42984d7c1e bpf: add sample usages for persistent maps/progs
This patch adds a couple of stand-alone examples on how BPF_OBJ_PIN
and BPF_OBJ_GET commands can be used.

Example with maps:

  # ./fds_example -F /sys/fs/bpf/m -P -m -k 1 -v 42
  bpf: map fd:3 (Success)
  bpf: pin ret:(0,Success)
  bpf: fd:3 u->(1:42) ret:(0,Success)
  # ./fds_example -F /sys/fs/bpf/m -G -m -k 1
  bpf: get fd:3 (Success)
  bpf: fd:3 l->(1):42 ret:(0,Success)
  # ./fds_example -F /sys/fs/bpf/m -G -m -k 1 -v 24
  bpf: get fd:3 (Success)
  bpf: fd:3 u->(1:24) ret:(0,Success)
  # ./fds_example -F /sys/fs/bpf/m -G -m -k 1
  bpf: get fd:3 (Success)
  bpf: fd:3 l->(1):24 ret:(0,Success)

  # ./fds_example -F /sys/fs/bpf/m2 -P -m
  bpf: map fd:3 (Success)
  bpf: pin ret:(0,Success)
  # ./fds_example -F /sys/fs/bpf/m2 -G -m -k 1
  bpf: get fd:3 (Success)
  bpf: fd:3 l->(1):0 ret:(0,Success)
  # ./fds_example -F /sys/fs/bpf/m2 -G -m
  bpf: get fd:3 (Success)

Example with progs:

  # ./fds_example -F /sys/fs/bpf/p -P -p
  bpf: prog fd:3 (Success)
  bpf: pin ret:(0,Success)
  bpf sock:4 <- fd:3 attached ret:(0,Success)
  # ./fds_example -F /sys/fs/bpf/p -G -p
  bpf: get fd:3 (Success)
  bpf: sock:4 <- fd:3 attached ret:(0,Success)

  # ./fds_example -F /sys/fs/bpf/p2 -P -p -o ./sockex1_kern.o
  bpf: prog fd:5 (Success)
  bpf: pin ret:(0,Success)
  bpf: sock:3 <- fd:5 attached ret:(0,Success)
  # ./fds_example -F /sys/fs/bpf/p2 -G -p
  bpf: get fd:3 (Success)
  bpf: sock:4 <- fd:3 attached ret:(0,Success)

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-02 22:48:39 -05:00
Chunyan Zhang
67aedeb857 Sample: Trace_event: Correct the comments
The commit 889204278c ("tracing: Update trace-event-sample with
TRACE_SYSTEM_VAR documentation") changed TRACE_SYSTEM to 'sample-trace',
but didn't make the according change of its name in the comments.

Link: http://lkml.kernel.org/r/1443599650-23680-1-git-send-email-zhang.chunyan@linaro.org

Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-02 14:09:15 -05:00
David S. Miller
b75ec3af27 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2015-11-01 00:15:30 -04:00
Yang Shi
85ff8a43f3 bpf: sample: define aarch64 specific registers
Define aarch64 specific registers for building bpf samples correctly.

Signed-off-by: Yang Shi <yang.shi@linaro.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27 19:51:10 -07:00
Alexei Starovoitov
39111695b1 samples: bpf: add bpf_perf_event_output example
Performance test and example of bpf_perf_event_output().
kprobe is attached to sys_write() and trivial bpf program streams
pid+cookie into userspace via PERF_COUNT_SW_BPF_OUTPUT event.

Usage:
$ sudo ./bld_x64/samples/bpf/trace_output
recv 2968913 events per sec

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22 06:42:15 -07:00
Christoph Hellwig
517982229f configfs: remove old API
Remove the old show_attribute and store_attribute methods and update
the documentation.  Also replace the two C samples with a single new
one in the proper samples directory where people expect to find it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-10-13 22:17:57 -07:00
Alexei Starovoitov
bf5088773f bpf: add unprivileged bpf tests
Add new tests samples/bpf/test_verifier:

unpriv: return pointer
  checks that pointer cannot be returned from the eBPF program

unpriv: add const to pointer
unpriv: add pointer to pointer
unpriv: neg pointer
  checks that pointer arithmetic is disallowed

unpriv: cmp pointer with const
unpriv: cmp pointer with pointer
  checks that comparison of pointers is disallowed
  Only one case allowed 'void *value = bpf_map_lookup_elem(..); if (value == 0) ...'

unpriv: check that printk is disallowed
  since bpf_trace_printk is not available to unprivileged

unpriv: pass pointer to helper function
  checks that pointers cannot be passed to functions that expect integers
  If function expects a pointer the verifier allows only that type of pointer.
  Like 1st argument of bpf_map_lookup_elem() must be pointer to map.
  (applies to non-root as well)

unpriv: indirectly pass pointer on stack to helper function
  checks that pointer stored into stack cannot be used as part of key
  passed into bpf_map_lookup_elem()

unpriv: mangle pointer on stack 1
unpriv: mangle pointer on stack 2
  checks that writing into stack slot that already contains a pointer
  is disallowed

unpriv: read pointer from stack in small chunks
  checks that < 8 byte read from stack slot that contains a pointer is
  disallowed

unpriv: write pointer into ctx
  checks that storing pointers into skb->fields is disallowed

unpriv: write pointer into map elem value
  checks that storing pointers into element values is disallowed
  For example:
  int bpf_prog(struct __sk_buff *skb)
  {
    u32 key = 0;
    u64 *value = bpf_map_lookup_elem(&map, &key);
    if (value)
       *value = (u64) skb;
  }
  will be rejected.

unpriv: partial copy of pointer
  checks that doing 32-bit register mov from register containing
  a pointer is disallowed

unpriv: pass pointer to tail_call
  checks that passing pointer as an index into bpf_tail_call
  is disallowed

unpriv: cmp map pointer with zero
  checks that comparing map pointer with constant is disallowed

unpriv: write into frame pointer
  checks that frame pointer is read-only (applies to root too)

unpriv: cmp of frame pointer
  checks that R10 cannot be using in comparison

unpriv: cmp of stack pointer
  checks that Rx = R10 - imm is ok, but comparing Rx is not

unpriv: obfuscate stack pointer
  checks that Rx = R10 - imm is ok, but Rx -= imm is not

Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12 19:13:37 -07:00
David S. Miller
f6d3125fa3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	net/dsa/slave.c

net/dsa/slave.c simply had overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-02 07:21:25 -07:00
Petr Mladek
54aea45429 kprobes: use _do_fork() in samples to make them work again
Commit 3033f14ab7 ("clone: support passing tls argument via C rather
than pt_regs magic") introduced _do_fork() that allowed to pass @tls
parameter.

The old do_fork() is defined only for architectures that are not ready
to use this way and do not define HAVE_COPY_THREAD_TLS.

Let's use _do_fork() in the kprobe examples to make them work again on
all architectures.

Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thiago Macieira <thiago.macieira@intel.com>
Cc: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-01 21:42:35 -04:00
Alexei Starovoitov
27b29f6305 bpf: add bpf_redirect() helper
Existing bpf_clone_redirect() helper clones skb before redirecting
it to RX or TX of destination netdev.
Introduce bpf_redirect() helper that does that without cloning.

Benchmarked with two hosts using 10G ixgbe NICs.
One host is doing line rate pktgen.
Another host is configured as:
$ tc qdisc add dev $dev ingress
$ tc filter add dev $dev root pref 10 u32 match u32 0 0 flowid 1:2 \
   action bpf run object-file tcbpf1_kern.o section clone_redirect_xmit drop
so it receives the packet on $dev and immediately xmits it on $dev + 1
The section 'clone_redirect_xmit' in tcbpf1_kern.o file has the program
that does bpf_clone_redirect() and performance is 2.0 Mpps

$ tc filter add dev $dev root pref 10 u32 match u32 0 0 flowid 1:2 \
   action bpf run object-file tcbpf1_kern.o section redirect_xmit drop
which is using bpf_redirect() - 2.4 Mpps

and using cls_bpf with integrated actions as:
$ tc filter add dev $dev root pref 10 \
  bpf run object-file tcbpf1_kern.o section redirect_xmit integ_act classid 1
performance is 2.5 Mpps

To summarize:
u32+act_bpf using clone_redirect - 2.0 Mpps
u32+act_bpf using redirect - 2.4 Mpps
cls_bpf using redirect - 2.5 Mpps

For comparison linux bridge in this setup is doing 2.1 Mpps
and ixgbe rx + drop in ip_rcv - 7.8 Mpps

Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-17 21:09:07 -07:00
Kaixu Xia
5ed3ccbd5a bpf: fix build warnings and add function read_trace_pipe()
There are two improvements in this patch:
 1. Fix the build warnings;
 2. Add function read_trace_pipe() to print the result on
    the screen;

Before this patch, we can get the result through /sys/kernel/de
bug/tracing/trace_pipe and get nothing on the screen.
By applying this patch, the result can be printed on the screen.
  $ ./tracex6
	...
         tracex6-705   [003] d..1   131.428593: : CPU-3   19981414
            sshd-683   [000] d..1   131.428727: : CPU-0   221682321
            sshd-683   [000] d..1   131.428821: : CPU-0   221808766
            sshd-683   [000] d..1   131.428950: : CPU-0   221982984
            sshd-683   [000] d..1   131.429045: : CPU-0   222111851
         tracex6-705   [003] d..1   131.429168: : CPU-3   20757551
            sshd-683   [000] d..1   131.429170: : CPU-0   222281240
            sshd-683   [000] d..1   131.429261: : CPU-0   222403340
            sshd-683   [000] d..1   131.429378: : CPU-0   222561024
	...

Signed-off-by: Kaixu Xia <xiakaixu@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12 16:39:12 -07:00
Kaixu Xia
47efb30274 samples/bpf: example of get selected PMU counter value
This is a simple example and shows how to use the new ability
to get the selected Hardware PMU counter value.

Signed-off-by: Kaixu Xia <xiakaixu@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-09 22:50:06 -07:00
Alex Gartrell
24b4d2abd0 ebpf: Allow dereferences of PTR_TO_STACK registers
mov %rsp, %r1           ; r1 = rsp
        add $-8, %r1            ; r1 = rsp - 8
        store_q $123, -8(%rsp)  ; *(u64*)r1 = 123  <- valid
        store_q $123, (%r1)     ; *(u64*)r1 = 123  <- previously invalid
        mov $0, %r0
        exit                    ; Always need to exit

And we'd get the following error:

	0: (bf) r1 = r10
	1: (07) r1 += -8
	2: (7a) *(u64 *)(r10 -8) = 999
	3: (7a) *(u64 *)(r1 +0) = 999
	R1 invalid mem access 'fp'

	Unable to load program

We already know that a register is a stack address and the appropriate
offset, so we should be able to validate those references as well.

Signed-off-by: Alex Gartrell <agartrell@fb.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-27 00:54:10 -07:00
David S. Miller
c5e40ee287 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	net/bridge/br_mdb.c

br_mdb.c conflict was a function call being removed to fix a bug in
'net' but whose signature was changed in 'net-next'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-23 00:41:16 -07:00
Steven Rostedt (Red Hat)
d6726c8145 tracing: Fix sample output of dynamic arrays
He Kuang noticed that the trace event samples for arrays was broken:

"The output result of trace_foo_bar event in traceevent samples is
 wrong. This problem can be reproduced as following:

  (Build kernel with SAMPLE_TRACE_EVENTS=m)

  $ insmod trace-events-sample.ko

  $ echo 1 > /sys/kernel/debug/tracing/events/sample-trace/foo_bar/enable

  $ cat /sys/kernel/debug/tracing/trace

  event-sample-980 [000] ....  43.649559: foo_bar: foo hello 21 0x15
  BIT1|BIT3|0x10 {0x1,0x6f6f6e53,0xff007970,0xffffffff} Snoopy
                 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
                 The array length is not right, should be {0x1}.
  (ffffffff,ffffffff)

  event-sample-980 [000] ....  44.653827: foo_bar: foo hello 22 0x16
  BIT2|BIT3|0x10
  {0x1,0x2,0x646e6147,0x666c61,0xffffffff,0xffffffff,0x750aeffe,0x7}
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
                 The array length is not right, should be {0x1,0x2}.
  Gandalf (ffffffff,ffffffff)"

This was caused by an update to have __print_array()'s second parameter
be the count of items in the array and not the size of the array.

As there is already users of __print_array(), it can not change. But
the sample code can and we can also improve on the documentation about
__print_array() and __get_dynamic_array_len().

Link: http://lkml.kernel.org/r/1436839171-31527-2-git-send-email-hekuang@huawei.com

Fixes: ac01ce1410 ("tracing: Make ftrace_print_array_seq compute buf_len")
Reported-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-07-17 14:15:13 -04:00
Michael Holzheu
d912557b34 samples: bpf: enable trace samples for s390x
The trace bpf samples do not compile on s390x because they use x86
specific fields from the "pt_regs" structure.

Fix this and access the fields via new PT_REGS macros.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08 15:17:45 -07:00
Daniel Wagner
0fb1170ee6 bpf: BPF based latency tracing
BPF offers another way to generate latency histograms. We attach
kprobes at trace_preempt_off and trace_preempt_on and calculate the
time it takes to from seeing the off/on transition.

The first array is used to store the start time stamp. The key is the
CPU id. The second array stores the log2(time diff). We need to use
static allocation here (array and not hash tables). The kprobes
hooking into trace_preempt_on|off should not calling any dynamic
memory allocation or free path. We need to avoid recursivly
getting called. Besides that, it reduces jitter in the measurement.

CPU 0
      latency        : count     distribution
       1 -> 1        : 0        |                                        |
       2 -> 3        : 0        |                                        |
       4 -> 7        : 0        |                                        |
       8 -> 15       : 0        |                                        |
      16 -> 31       : 0        |                                        |
      32 -> 63       : 0        |                                        |
      64 -> 127      : 0        |                                        |
     128 -> 255      : 0        |                                        |
     256 -> 511      : 0        |                                        |
     512 -> 1023     : 0        |                                        |
    1024 -> 2047     : 0        |                                        |
    2048 -> 4095     : 166723   |*************************************** |
    4096 -> 8191     : 19870    |***                                     |
    8192 -> 16383    : 6324     |                                        |
   16384 -> 32767    : 1098     |                                        |
   32768 -> 65535    : 190      |                                        |
   65536 -> 131071   : 179      |                                        |
  131072 -> 262143   : 18       |                                        |
  262144 -> 524287   : 4        |                                        |
  524288 -> 1048575  : 1363     |                                        |
CPU 1
      latency        : count     distribution
       1 -> 1        : 0        |                                        |
       2 -> 3        : 0        |                                        |
       4 -> 7        : 0        |                                        |
       8 -> 15       : 0        |                                        |
      16 -> 31       : 0        |                                        |
      32 -> 63       : 0        |                                        |
      64 -> 127      : 0        |                                        |
     128 -> 255      : 0        |                                        |
     256 -> 511      : 0        |                                        |
     512 -> 1023     : 0        |                                        |
    1024 -> 2047     : 0        |                                        |
    2048 -> 4095     : 114042   |*************************************** |
    4096 -> 8191     : 9587     |**                                      |
    8192 -> 16383    : 4140     |                                        |
   16384 -> 32767    : 673      |                                        |
   32768 -> 65535    : 179      |                                        |
   65536 -> 131071   : 29       |                                        |
  131072 -> 262143   : 4        |                                        |
  262144 -> 524287   : 1        |                                        |
  524288 -> 1048575  : 364      |                                        |
CPU 2
      latency        : count     distribution
       1 -> 1        : 0        |                                        |
       2 -> 3        : 0        |                                        |
       4 -> 7        : 0        |                                        |
       8 -> 15       : 0        |                                        |
      16 -> 31       : 0        |                                        |
      32 -> 63       : 0        |                                        |
      64 -> 127      : 0        |                                        |
     128 -> 255      : 0        |                                        |
     256 -> 511      : 0        |                                        |
     512 -> 1023     : 0        |                                        |
    1024 -> 2047     : 0        |                                        |
    2048 -> 4095     : 40147    |*************************************** |
    4096 -> 8191     : 2300     |*                                       |
    8192 -> 16383    : 828      |                                        |
   16384 -> 32767    : 178      |                                        |
   32768 -> 65535    : 59       |                                        |
   65536 -> 131071   : 2        |                                        |
  131072 -> 262143   : 0        |                                        |
  262144 -> 524287   : 1        |                                        |
  524288 -> 1048575  : 174      |                                        |
CPU 3
      latency        : count     distribution
       1 -> 1        : 0        |                                        |
       2 -> 3        : 0        |                                        |
       4 -> 7        : 0        |                                        |
       8 -> 15       : 0        |                                        |
      16 -> 31       : 0        |                                        |
      32 -> 63       : 0        |                                        |
      64 -> 127      : 0        |                                        |
     128 -> 255      : 0        |                                        |
     256 -> 511      : 0        |                                        |
     512 -> 1023     : 0        |                                        |
    1024 -> 2047     : 0        |                                        |
    2048 -> 4095     : 29626    |*************************************** |
    4096 -> 8191     : 2704     |**                                      |
    8192 -> 16383    : 1090     |                                        |
   16384 -> 32767    : 160      |                                        |
   32768 -> 65535    : 72       |                                        |
   65536 -> 131071   : 32       |                                        |
  131072 -> 262143   : 26       |                                        |
  262144 -> 524287   : 12       |                                        |
  524288 -> 1048575  : 298      |                                        |

All this is based on the trace3 examples written by
Alexei Starovoitov <ast@plumgrid.com>.

Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23 06:09:58 -07:00
Alexei Starovoitov
ffeedafbf0 bpf: introduce current->pid, tgid, uid, gid, comm accessors
eBPF programs attached to kprobes need to filter based on
current->pid, uid and other fields, so introduce helper functions:

u64 bpf_get_current_pid_tgid(void)
Return: current->tgid << 32 | current->pid

u64 bpf_get_current_uid_gid(void)
Return: current_gid << 32 | current_uid

bpf_get_current_comm(char *buf, int size_of_buf)
stores current->comm into buf

They can be used from the programs attached to TC as well to classify packets
based on current task fields.

Update tracex2 example to print histogram of write syscalls for each process
instead of aggregated for all.

Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-15 15:53:50 -07:00
Alexei Starovoitov
d691f9e8d4 bpf: allow programs to write to certain skb fields
allow programs read/write skb->mark, tc_index fields and
((struct qdisc_skb_cb *)cb)->data.

mark and tc_index are generically useful in TC.
cb[0]-cb[4] are primarily used to pass arguments from one
program to another called via bpf_tail_call() which can
be seen in sockex3_kern.c example.

All fields of 'struct __sk_buff' are readable to socket and tc_cls_act progs.
mark, tc_index are writeable from tc_cls_act only.
cb[0]-cb[4] are writeable by both sockets and tc_cls_act.

Add verifier tests and improve sample code.

Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-07 02:01:33 -07:00
Alexei Starovoitov
3431205e03 bpf: make programs see skb->data == L2 for ingress and egress
eBPF programs attached to ingress and egress qdiscs see inconsistent skb->data.
For ingress L2 header is already pulled, whereas for egress it's present.
This is known to program writers which are currently forced to use
BPF_LL_OFF workaround.
Since programs don't change skb internal pointers it is safe to do
pull/push right around invocation of the program and earlier taps and
later pt->func() will not be affected.
Multiple taps via packet_rcv(), tpacket_rcv() are doing the same trick
around run_filter/BPF_PROG_RUN even if skb_shared.

This fix finally allows programs to use optimized LD_ABS/IND instructions
without BPF_LL_OFF for higher performance.
tc ingress + cls_bpf + samples/bpf/tcbpf1_kern.o
       w/o JIT   w/JIT
before  20.5     23.6 Mpps
after   21.8     26.6 Mpps

Old programs with BPF_LL_OFF will still work as-is.

We can now undo most of the earlier workaround commit:
a166151cbe ("bpf: fix bpf helpers to use skb->mac_header relative offsets")

Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-07 02:01:33 -07:00
Jesper Dangaard Brouer
05a14d5e17 pktgen: add benchmark script pktgen_bench_xmit_mode_netif_receive.sh
This script pktgen_bench_xmit_mode_netif_receive.sh is a benchmark
script, which can be used for benchmarking part of the network stack.
This can be used for performance improving or catching regression in
that area.

The script is developed for benchmarking ingress qdisc path, original
idea by Alexei Starovoitov.  This script don't really need any
hardware.  This is achieved via the recently introduced stack inject
feature "xmit_mode netif_receive". See commit 62f64aed62 ("pktgen:
introduce xmit_mode '<start_xmit|netif_receive>'").

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-22 23:59:17 -04:00
Jesper Dangaard Brouer
1d73ba16ad pktgen: add sample script pktgen_sample03_burst_single_flow.sh
Add the pktgen samples script pktgen_sample03_burst_single_flow.sh
that demonstrates how to acheive maximum performance.

If correctly tuned[1] single CPU 10Gbit/s wirespeed small pkts is
possible[2] which is 14.88Mpps.  The trick is to take advantage of the
"burst" feature introduced in commit 38b2cf2982 ("net: pktgen:
packet bursting via skb->xmit_more").

[1] http://netoptimizer.blogspot.dk/2014/06/pktgen-for-network-overload-testing.html
[2] http://netoptimizer.blogspot.dk/2014/10/unlocked-10gbps-tx-wirespeed-smallest.html

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-22 23:59:17 -04:00
Jesper Dangaard Brouer
282fb58947 pktgen: add sample script pktgen_sample02_multiqueue.sh
Add the pktgen samples script pktgen_sample02_multiqueue.sh that
demonstrates generating packets on multiqueue NICs.

Specifically notice the options "-t" that specifies how many
kernel threads to activate.  Also notice the flag QUEUE_MAP_CPU,
which cause the SKB TX queue to be mapped to the CPU running the
kernel thread.  For best scalability people are also encourage to
map NIC IRQ /proc/irq/*/smp_affinity to CPU number.

Usage example with "-t" 4 threads and help:
 ./pktgen_sample02_multiqueue.sh -i eth4 -m 00:1B:21:3C:9D:F8 -t 4

Usage: ./pktgen_sample02_multiqueue.sh [-vx] -i ethX
  -i : ($DEV)       output interface/device (required)
  -s : ($PKT_SIZE)  packet size
  -d : ($DEST_IP)   destination IP
  -m : ($DST_MAC)   destination MAC-addr
  -t : ($THREADS)   threads to start
  -c : ($SKB_CLONE) SKB clones send before alloc new SKB
  -b : ($BURST)     HW level bursting of SKBs
  -v : ($VERBOSE)   verbose
  -x : ($DEBUG)     debug

Removing pktgen.conf-2-1 and pktgen.conf-2-2 as these examples
should be covered now.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-22 23:59:17 -04:00
Jesper Dangaard Brouer
6f09479758 pktgen: add sample script pktgen_sample01_simple.sh
Add the first basic pktgen samples script pktgen_sample01_simple.sh,
which demonstrates the a simple use of the helper functions.
Removing pktgen.conf-1-1 as that example should be covered now.

The naming scheme pktgen_sampleNN, where NN is a number, should encourage
reading the samples in a specific order.

Script cause pktgen sending with a single thread and single interface,
and introduce flow variation via random UDP source port.

Usage example and help:
 ./pktgen_sample01_simple.sh -i eth4 -m 00:1B:21:3C:9D:F8 -d 192.168.8.2

Usage: ./pktgen_sample01_simple.sh [-vx] -i ethX
  -i : ($DEV)       output interface/device (required)
  -s : ($PKT_SIZE)  packet size
  -d : ($DEST_IP)   destination IP
  -m : ($DST_MAC)   destination MAC-addr
  -c : ($SKB_CLONE) SKB clones send before alloc new SKB
  -v : ($VERBOSE)   verbose
  -x : ($DEBUG)     debug

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-22 23:59:17 -04:00
Jesper Dangaard Brouer
b64b0d1e64 pktgen: new pktgen helper functions for samples scripts
Preparing for removing existing samples/pktgen/ scripts, and
replacing these with easier to use samples.

This commit provides two helper shell files, that can
be "included" by shell source'ing. Namely "functions.sh"
and "parameters.sh".

The parameters.sh file support easy and consistant parameter
parsing across the sample scripts.  Usage example is printed on
errors.

The functions.sh file provides, three new shell functions for
configuring the different components of pktgen: pg_ctrl(),
pg_thread() and pg_set().  A slightly improved version of the old
pgset() function is also provided for backwards compat.

The new functions correspond to pktgens different components.
 * pg_ctrl()   control "pgctrl" (/proc/net/pktgen/pgctrl)
 * pg_thread() control the kernel threads and binding to devices
 * pg_set()    control setup of individual devices

These changes are borrowed from:
 https://github.com/netoptimizer/network-testing/tree/master/pktgen

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-22 23:59:16 -04:00
Alexei Starovoitov
530b2c8619 samples/bpf: bpf_tail_call example for networking
Usage:
$ sudo ./sockex3
IP     src.port -> dst.port               bytes      packets
127.0.0.1.42010 -> 127.0.0.1.12865         1568            8
127.0.0.1.59526 -> 127.0.0.1.33778     11422636       173070
127.0.0.1.33778 -> 127.0.0.1.59526  11260224828       341974
127.0.0.1.12865 -> 127.0.0.1.42010         1832           12
IP     src.port -> dst.port               bytes      packets
127.0.0.1.42010 -> 127.0.0.1.12865         1568            8
127.0.0.1.59526 -> 127.0.0.1.33778     23198092       351486
127.0.0.1.33778 -> 127.0.0.1.59526  22972698518       698616
127.0.0.1.12865 -> 127.0.0.1.42010         1832           12

this example is similar to sockex2 in a way that it accumulates per-flow
statistics, but it does packet parsing differently.
sockex2 inlines full packet parser routine into single bpf program.
This sockex3 example have 4 independent programs that parse vlan, mpls, ip, ipv6
and one main program that starts the process.
bpf_tail_call() mechanism allows each program to be small and be called
on demand potentially multiple times, so that many vlan, mpls, ip in ip,
gre encapsulations can be parsed. These and other protocol parsers can
be added or removed at runtime. TLVs can be parsed in similar manner.
Note, tail_call_cnt dynamic check limits the number of tail calls to 32.

Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-21 17:07:59 -04:00