Commit graph

421 commits

Author SHA1 Message Date
John W. Linville
0f496df2d9 Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next 2013-01-30 14:21:04 -05:00
Jaganath Kanakkassery
7b064edae3 Bluetooth: Fix authentication if acl data comes before remote feature evt
If remote device sends l2cap info request before read_remote_ext_feature
completes then mgmt_connected will be sent in hci_acldata_packet() and
remote name request wont be sent and eventually authentication wont happen

Hcidump log of the issue

< HCI Command: Create Connection (0x01|0x0005) plen 13
    bdaddr BC:85:1F:74:7F:29 ptype 0xcc18 rswitch 0x01 clkoffset 0x4bf7 (valid)
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5
> HCI Event: Command Status (0x0f) plen 4
    Create Connection (0x01|0x0005) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
    status 0x00 handle 12 bdaddr BC:85:1F:74:7F:29 type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
    handle 12
> HCI Event: Command Status (0x0f) plen 4
    Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1
> HCI Event: Read Remote Supported Features (0x0b) plen 11
    status 0x00 handle 12
    Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87
> HCI Event: Max Slots Change (0x1b) plen 3
    handle 12 slots 5
< HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3
    handle 12 page 1
> HCI Event: Command Status (0x0f) plen 4
    Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1
> ACL data: handle 12 flags 0x02 dlen 10
    L2CAP(s): Info req: type 2
< ACL data: handle 12 flags 0x00 dlen 16
    L2CAP(s): Info rsp: type 2 result 0
      Extended feature mask 0x00b8
        Enhanced Retransmission mode
        Streaming mode
        FCS Option
        Fixed Channels
> HCI Event: Read Remote Extended Features (0x23) plen 13
    status 0x00 handle 12 page 1 max 1
    Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00
> ACL data: handle 12 flags 0x02 dlen 10
    L2CAP(s): Info req: type 3
< ACL data: handle 12 flags 0x00 dlen 20
    L2CAP(s): Info rsp: type 3 result 0
      Fixed channel list 0x00000002
        L2CAP Signalling Channel
> HCI Event: Number of Completed Packets (0x13) plen 5
    handle 12 packets 2

This patch moves sending mgmt_connected from hci_acldata_packet() to
l2cap_connect_req() since this code is to handle the scenario remote
device sends l2cap connect req too fast

Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-10 03:26:18 -02:00
Andrei Emeltchenko
cbf54ad104 Bluetooth: AMP: Remove dead code
Remove code which cannot execute. l2cap_conn_add for AMP_LINK
might only be invoked when receiving data in l2cap_recv_acldata.
But this case is checked in the first statement there.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-01-09 17:05:05 -02:00
Andrei Emeltchenko
f2592d3ee3 Bluetooth: trivial: Change NO_FCS_RECV to RECV_NO_FCS
Make code more readable by changing CONF_NO_FCS_RECV which is read
as "No L2CAP FCS option received" to CONF_RECV_NO_FCS which means
"Received L2CAP option NO_FCS". This flag really means that we have
received L2CAP FRAME CHECK SEQUENCE (FCS) OPTION with value "No FCS".

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-12-03 16:00:01 -02:00
Andrei Emeltchenko
cbabee788f Bluetooth: Process receiving FCS_NONE in L2CAP Conf Rsp
Process L2CAP Config rsp Pending with FCS Option 0x00 (No FCS)
which is sent by Motorola Windows 7 Bluetooth stack. The trace
is shown below (all other options are skipped).

...
< ACL data: handle 1 flags 0x00 dlen 48
    L2CAP(s): Config req: dcid 0x0043 flags 0x00 clen 36
      ...
      FCS Option 0x00 (No FCS)
> ACL data: handle 1 flags 0x02 dlen 48
    L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 36
      ...
      FCS Option 0x01 (CRC16 Check)
< ACL data: handle 1 flags 0x00 dlen 47
    L2CAP(s): Config rsp: scid 0x0043 flags 0x00 result 4 clen 33
      Pending
      ...
> ACL data: handle 1 flags 0x02 dlen 50
    L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 4 clen 36
      Pending
      ...
      FCS Option 0x00 (No FCS)
< ACL data: handle 1 flags 0x00 dlen 14
    L2CAP(s): Config rsp: scid 0x0043 flags 0x00 result 0 clen 0
      Success
> ACL data: handle 1 flags 0x02 dlen 14
    L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 0
      Success
...

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-12-03 16:00:01 -02:00
Andrei Emeltchenko
60918918a9 Bluetooth: Fix missing L2CAP EWS Conf parameter
If L2CAP_FEAT_FCS is not supported we sould miss EWS option
configuration because of break. Make code more readable by
combining FCS configuration in the single block.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-12-03 16:00:00 -02:00
Andrei Emeltchenko
5d05416e09 Bluetooth: AMP: Check that AMP is present and active
Before starting quering remote AMP controllers make sure
that there is local active AMP controller.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-12-03 16:00:00 -02:00
Andrei Emeltchenko
5e4e3972b8 Bluetooth: Refactor l2cap_send_disconn_req
l2cap_send_disconn_req takes 3 parameters of which conn might be
derived from chan. Make this conversion inside l2cap_send_disconn_req.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-12-03 15:59:59 -02:00
Andrei Emeltchenko
fd45bf4c92 Bluetooth: AMP: Set no FCS for incoming L2CAP chan
When receiving L2CAP Create Channel Request set the channel as
L2CAP_FCS_NONE. Then in "L2CAP Config req" following field will
be set: "FCS Option 0x00 (No FCS)". So by default High Speed
channels have no FCS.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-20 15:55:22 -02:00
Andrei Emeltchenko
1bb166e66c Bluetooth: Improve error message printing
Instead of printing:
"[ 7763.082007] Bluetooth: 2"
print something like:
"[ 7763.082007] Bluetooth: Trailing bytes: 2 in sframe"

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-20 15:55:09 -02:00
Andrei Emeltchenko
62748ca16f Bluetooth: Fix sending L2CAP Create Chan Req
When receiving Physical Link Completed event we need to create L2CAP
channel with L2CAP Create Chan Request. Current code was sending
this command only if connection was pending (which is probably
needed in channel move case). If channel is not moved but created
Create Chan should be sent for outgoing channel which is checked
with BT_CONNECT flag.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-20 15:54:15 -02:00
Andrei Emeltchenko
62cd50e262 Bluetooth: trivial: Use __constant for constants
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-19 19:30:56 -02:00
Andrei Emeltchenko
12d6cc60f2 Bluetooth: Disable FCS only for new HS channels
Set chan->fcs to L2CAP_FCS_NONE only for new L2CAP channels
(not moved). Other side can still request to use FCS.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-19 19:30:35 -02:00
Andrei Emeltchenko
a514b17fab Bluetooth: Refactor locking in amp_physical_cfm
Remove locking from l2cap_physical_cfm and lock chan inside
amp_physical_cfm.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-19 19:30:00 -02:00
Andrei Emeltchenko
522db70286 Bluetooth: Remove unneeded local_amp_id initialization
local_amp_id is already set in l2cap_connect() which is called several
lines above.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-19 19:26:35 -02:00
Andrei Emeltchenko
96eff46e9f Bluetooth: Use __l2cap_no_conn_pending helper
Use helper instead of test_bit. This is the only place left using
test CONF_CONNECT_PEND flag.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-19 19:24:45 -02:00
Andrei Emeltchenko
fffadc08eb Bluetooth: Rename ctrl_id to remote_amp_id
Since we have started to use local_amp_id for local AMP
Controller Id it makes sense to rename ctrl_id to remote_amp_id
since it represents remote AMP controller Id.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01 20:27:11 -02:00
Andrei Emeltchenko
6e1df6a603 Bluetooth: Process Create Chan Request
Add processing L2CAP Create Chan Request. When channel is created
save associated high speed link hs_hcon.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01 20:27:10 -02:00
Andrei Emeltchenko
f351bc7267 Bluetooth: AMP: Check for hs_hcon instead of ctrl_id
When deciding whether to send EFS configuration response with success,
check rather for existence of High Speed physical link hs_hcon then
ctrl_id. There might be cases when there is ctrl_id but high speed link
is not established yet.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01 20:27:09 -02:00
Andrei Emeltchenko
419e08c112 Bluetooth: Disconnect logical link when deleting chan
Disconnect logical link for high speed channel hs_hchan
associated with L2CAP channel chan.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01 20:27:09 -02:00
Andrei Emeltchenko
5ce66b59d7 Bluetooth: AMP: Add Logical Link Create function
After physical link is created logical link needs to be created.
The process starts after L2CAP channel is created and L2CAP
Configuration Response with result PENDING is received.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01 20:27:07 -02:00
Andrei Emeltchenko
770bfefa2c Bluetooth: Derive remote and local amp id from chan struct
l2cap_chan already keeps information about *_amp_id.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01 20:27:06 -02:00
Andrei Emeltchenko
439f34acea Bluetooth: Return correct L2CAP response type
Return L2CAP_CREATE_CHAN_RSP for Create Channel Request and
L2CAP_CONN_RSP for Create Connection Request.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01 20:27:06 -02:00
Andrei Emeltchenko
336178a334 Bluetooth: Save hs_hchan instead of hs_hcon in loglink complete
When logical link creation is completed we need to save hs_hchan
which represents logical link instead of hs_hcon representing
physical link. hs_hcon shall be saved when receiving physical link
complete event.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01 20:27:05 -02:00
Andrei Emeltchenko
ba6fc31727 Bluetooth: trivial: Fix braces style and remove empty line
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01 20:27:05 -02:00
Andrei Emeltchenko
27695fb415 Bluetooth: AMP: Process Logical Link complete evt
After receiving HCI Logical Link Complete event finish EFS
configuration by sending L2CAP Conf Response with success code.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01 20:27:02 -02:00
Andrei Emeltchenko
35ba9561b9 Bluetooth: Use helper function sending EFS conf rsp
There is helper function used to send EFS Configuration Response.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01 20:27:01 -02:00
Andrei Emeltchenko
fe79c6fea3 Bluetooth: trivial: Remove unneeded assignment
Assignment is not needed here since err is always gets value.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01 20:27:01 -02:00
Mat Martineau
3f7a56c4ff Bluetooth: Start channel move when socket option is changed
Channel moves are triggered by changes to the BT_CHANNEL_POLICY
sockopt when an ERTM or streaming-mode channel is connected.

Moves are only started if enable_hs is true.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24 00:26:30 -02:00
Mat Martineau
e6a3ee6e8a Bluetooth: Do not retransmit data during a channel move
Do not retransmit previously-sent data when a "receiver ready" s-frame
with the "final" flag is received during a move.

The ERTM state machines will resynchronize at the end of a channel
move, and the state machine needs to avoid state changes during a
move.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24 00:25:55 -02:00
Mat Martineau
a549574da3 Bluetooth: Ignore BR/EDR packet size constraints when fragmenting for AMP
When operating over BR/EDR, ERTM accounts for the maximum over-the-air
packet size when setting the PDU size.  AMP controllers do not use the
same over-the-air packets, so the PDU size should only be based on the
HCI MTU of the AMP controller.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24 00:25:50 -02:00
Mat Martineau
36c86c8566 Bluetooth: Configure appropriate timeouts for AMP controllers
The L2CAP spec recommends specific retransmit and monitor timeouts for
ERTM channels that are on AMP controllers.  These timeouts are
calculated from the AMP controller's best effort flush timeout.

BR/EDR controllers use the default retransmit and monitor timeouts.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24 00:25:42 -02:00
Mat Martineau
b99e13ade7 Bluetooth: Do not send data during channel move
Outgoing ERTM data is queued during a channel move.  The ERTM state
machine is partially reset at the start of a move, and must be
resynchronized with the remote state machine at the end of the move.
Data is not sent so that there are no state transitions between the
partial reset and the resync.

Streaming mode frames are dropped during a move.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24 00:24:56 -02:00
Mat Martineau
d5f8a75d88 Bluetooth: Flag ACL frames as complete for AMP controllers
AMP controllers expect to transmit only "complete" ACL frames.  These
frames have both the "start" and "cont" bits set.  AMP does not allow
fragmented ACLs.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24 00:24:34 -02:00
Mat Martineau
8eb200bd2f Bluetooth: Handle physical link completion
Several different actions may be taken when an AMP physical link
becomes available.  A channel being created on an AMP controller must
continue the connection process.  A channel being moved needs to
either send a move request or a move response.  A failed physical link
will revert to using a BR/EDR controller if possible.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24 00:24:16 -02:00
Mat Martineau
3fd71a0a43 Bluetooth: Add move confirm response handling
The move confirm response concludes the channel move command sequence.
Receipt of this command indicates that data may begin to flow again.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24 00:23:48 -02:00
Mat Martineau
1500109bbc Bluetooth: Add logical link confirm
The logical link confirm callback is executed when the AMP controller
completes its logical link setup.  During a channel move, a newly
formed logical link allows a move responder to send a move channel
response.  A move initiator will send a move channel confirm.  A
failed logical link will end the channel move and send an appropriate
response or confirm command indicating a failure.

If the channel is being created on an AMP controller, L2CAP
configuration is completed after the logical link is set up.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24 00:21:41 -02:00
Mat Martineau
5b155ef960 Bluetooth: Move channel response
The move response command includes a result code indicating
"pending", "success", or "failure" status.  A pending result is
received when the remote address is still setting up a physical link,
and will be followed by success or failure.  On success, logical link
setup will proceed.  On failure, the move is stopped.  The receiver of
a move channel response must always follow up by sending a move
channel confirm command.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24 00:20:54 -02:00
Mat Martineau
5f3847a478 Bluetooth: Add move channel confirm handling
After sending a move channel response, a move responder waits for a
move channel confirm command.  If the received command has a
"confirmed" result the move is proceeding, and "unconfirmed" means the
move has failed and the channel will not change controllers.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24 00:15:03 -02:00
Mat Martineau
32b32735ca Bluetooth: Add new ERTM receive states for channel move
Two new states are required to implement channel moves with the ERTM
receive state machine.

The "WAIT_P" state is used by a move responder to wait for a "poll"
flag after a move is completed (success or failure).  "WAIT_F" is
similarly used by a move initiator to wait for a "final" flag when the
move is completing.  In either state, the reqseq value in the
poll/final frame tells the state machine exactly which frame should be
expected next.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24 00:12:04 -02:00
Mat Martineau
02b0fbb92d Bluetooth: Channel move request handling
On receipt of a channel move request, the request must be validated
based on the L2CAP mode, connection state, and controller
capabilities.  ERTM channels must have their state machines cleared
and transmission paused while the channel move takes place.

If the channel is being moved to an AMP controller then
an AMP physical link must be prepared.  Moving the channel back to
BR/EDR proceeds immediately.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24 00:09:15 -02:00
Mat Martineau
b1a130b7d3 Bluetooth: Lookup channel structure based on DCID
Processing a move channel request involves getting the channel
structure using the destination channel ID.  Previous code could only
look up using the source channel ID.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-24 00:01:53 -02:00
Mat Martineau
5909cf30f3 Bluetooth: Remove unnecessary intermediate function
Resolves a conflict resolution issue in "Bluetooth: Fix L2CAP coding
style".  The remaining connect and create channel response handler is
renamed to better reflect its use for both response types.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-23 23:59:52 -02:00
Mat Martineau
1700915fef Bluetooth: Add L2CAP create channel request handling
The L2CAP create channel request is very similar to an L2CAP connect
request, but it has an additional parameter for the controller ID.  If
the controller id is 0, the channel is set up on the BR/EDR controller
(just like a connect request).  Using a valid high speed controller ID
will cause the channel to be initially created on that high speed
controller.  While the L2CAP data will be initially routed over the
AMP controller, the L2CAP fixed signaling channel only uses BR/EDR.

When a create channel request is received for a high speed controller,
a pending response is always sent first.  After the high speed
physical and logical links are complete a success response will be
sent.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-23 23:58:52 -02:00
Mat Martineau
08333283a7 Bluetooth: Add new l2cap_chan struct members for high speed channels
An L2CAP channel using high speed continues to be associated with a
BR/EDR l2cap_conn, while also tracking an additional hci_conn
(representing a physical link on a high speed controller) and hci_chan
(representing a logical link).  There may only be one physical link
between two high speed controllers.  Each physical link may contain
several logical links, with each logical link representing a channel
with specific quality of service.

During a channel move, the destination channel id, current move state,
and role (initiator vs. responder) are tracked and used by the channel
move state machine.  The ident value associated with a move request
must also be stored in order to use it in later move responses.

The active channel is stored in local_amp_id.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-23 23:57:02 -02:00
John W. Linville
bc27d5f143 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next 2012-10-19 15:22:27 -04:00
Andrei Emeltchenko
56f6098441 Bluetooth: Zero bredr pointer when chan is deleted
If BREDR L2CAP chan is deleted and this chan is the channel through
which High Speed traffic is routed to AMP then zero pointer to
the chan in amp_mgr to prevent accessing it.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-15 09:49:58 -03:00
Andrei Emeltchenko
79de886d9c Bluetooth: Send EFS Conf Rsp only for BR/EDR chan
Do not send EFS Configuration Response for High Speed channel yet.
It will be sent after receiving Logical Link Complete event.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-15 09:47:44 -03:00
Andrei Emeltchenko
1d13a254e1 Bluetooth: AMP: Drop packets when no l2cap conn exist
High Speed hci_conn should always have l2cap_conn associated with it.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-15 09:47:11 -03:00
Andrei Emeltchenko
d73a098804 Bluetooth: AMP: Handle complete frames in l2cap
Check flags type in switch statement and handle new frame
type ACL_COMPLETE used for High Speed data over AMP.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-15 09:46:39 -03:00