The Linux NFS4 client simply skips over the bitmask in an O_EXCL open
call and so it doesn't bother to reset any fields that may be holding
the verifier. This patch has us save the first two words of the bitmask
(which is all the current client has #defines for). The client then
later checks this bitmask and turns on the appropriate flags in the
sattr->ia_verify field for the following SETATTR call.
This patch only currently checks to see if the server used the atime
and mtime slots for the verifier (which is what the Linux server uses
for this). I'm not sure of what other fields the server could
reasonably use, but adding checks for others should be trivial.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Many struct inode_operations in the kernel can be "const". Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data. In addition it'll catch accidental writes at compile time to
these shared resources.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Maintaining two parallel ways of doing synchronous writes is rather
pointless. This patch gets rid of the legacy nfs_writepage_sync(), and
replaces it with the faster asynchronous writes.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no>
Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
on-the-wire data is big-endian
[in large part pulled from Alexey's patch]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no>
Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Now that we have a copy of the symlink path in the page cache, we can pass
a struct page down to the XDR routines instead of a string buffer.
Test plan:
Connectathon, all NFS versions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the LOOKUP or GETATTR in nfs_instantiate fail, nfs_instantiate will do a
d_drop before returning. But some callers already do a d_drop in the case
of an error return. Make certain we do only one d_drop in all error paths.
This issue was introduced because over time, the symlink proc API diverged
slightly from the create/mkdir/mknod proc API. To prevent other coding
mistakes of this type, change the symlink proc API to be more like
create/mkdir/mknod and move the nfs_instantiate call into the symlink proc
routines so it is used in exactly the same way for create, mkdir, mknod,
and symlink.
Test plan:
Connectathon, all versions of NFS.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
include/linux/sunrpc/clnt.h already includes include/linux/sunrpc/xprt.h.
We can remove xprt.h from source files that already include clnt.h.
Likewise include/linux/sunrpc/timer.h.
Test plan:
Compile kernel with CONFIG_NFS enabled.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add some extra const qualifiers into NFS.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add a set_capabilities NFS RPC op so that the server capabilities can be set.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add a lookup filehandle NFS RPC op so that a file handle can be looked up
without requiring dentries and inodes and other VFS stuff when doing an NFS4
pathwalk during mounting.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The logic in nfs_direct_read_schedule and nfs_direct_write_schedule can
allow data->npages to be one larger than rpages. This causes a page
pointer to be written beyond the end of the pagevec in nfs_read_data (or
nfs_write_data).
Fix this by making nfs_(read|write)_alloc() calculate the size of the
pagevec array, and initialise data->npages.
Also get rid of the redundant argument to nfs_commit_alloc().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Neil Brown observed that the current limit of 32 bytes isn't enough to hold two
ip addresses and the rest of the stuff we're putting in it, so it's often
truncated to the point where it's unlikely to be unique. This can cause
spurious CLID_INUSE's from the server.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from fc8c17ec251e984ab3df9182ed097aa5b577c915 commit)
This reverts ccf01ef7aa commit.
No idea how git managed this one: when I asked it to merge the odirect
topic branch it actually generated a patch which reverted the change.
Reverting the 'merge' will once again reveal Chuck's recent NFS/O_DIRECT
work to the world.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Neil Brown observed that the kmalloc() in nfs_get_user_pages() is more
likely to fail if the I/O is large enough to require the allocation of more
than a single page to keep track of all the pinned pages in the user's
buffer.
Instead of tracking one large page array per dreq/iocb, track pages per
nfs_read/write_data, just like the cached I/O path does. An array for
pages is already allocated for us by nfs_readdata_alloc() (and the write
and commit equivalents).
This is also required for adding support for vectored I/O to the NFS direct
I/O path.
The original reason to pin the user buffer and allocate all the NFS data
structures before trying to schedule I/O was to ensure all needed resources
are allocated on the client before starting to send requests. This reduces
the chance that resource exhaustion on the client will cause a short read
or write.
On the other hand, for an application making very large application I/O
requests, this means that it will be nearly impossible for the application
to make forward progress on a resource-limited client.
Thus, moving the buffer pinning functionality into the I/O scheduling
loops should be good for scalability. The next patch will do the same for
NFS data structure allocation.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Respond to a moved error on NFS lookup by setting up the referral.
Note: We don't actually follow the referral during lookup/getattr, but
later when we detect fsid mismatch in inode revalidation (similar to the
processing done for cloning submounts). Referrals will have fake attributes
until they are actually followed or traversed.
Signed-off-by: Manoj Naik <manoj@almaden.ibm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use component4-style formats for decoding list of servers and pathnames in
fs_locations.
Signed-off-by: Manoj Naik <manoj@almaden.ibm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
NFSv4 allows for the fact that filesystems may be replicated across
several servers or that they may be migrated to a backup server in case of
failure of the primary server.
fs_locations is an NFSv4 operation for retrieving information about the
location of migrated and/or replicated filesystems.
Based on an initial implementation by Jiaying Zhang <jiayingz@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This should enable us to detect if we are crossing a mountpoint in the
case where the server is exporting "nohide" mounts.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up use of page_array, and fix an off-by-one error noticed by Tom
Talpey which causes kmalloc calls in cases where using the page_array
is sufficient.
Test plan:
Normal client functional testing with r/wsize=32768.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Same callback hierarchy inversion as for the NFS write calls. This patch is
not strictly speaking needed by the O_DIRECT code, but avoids confusing
differences between the asynchronous read and write code.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch inverts the callback hierarchy for NFS write calls.
Instead of having the NFSv2/v3/v4-specific code set up the RPC callback
ops, we allow the original caller to do so. This allows for more
flexibility w.r.t. how to set up and tear down the nfs_write_data
structure while still allowing the NFSv3/v4 code to perform error
handling.
The greater flexibility is needed by the asynchronous O_DIRECT code, which
wants to be able to hold on to the original nfs_write_data structures after
the WRITE RPC call has completed in order to be able to replay them if the
COMMIT call determines that the server has rebooted.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Upon return of a write delegation, the server will almost always bump the
change attribute. Ensure that we pick up that change so that we don't
invalidate our data cache unnecessarily.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Most NFS server implementations allow up to 64KB reads and writes on the
wire. The Solaris NFS server allows up to a megabyte, for instance.
Now the Linux NFS client supports transfer sizes up to 1MB, too. This will
help reduce protocol and context switch overhead on read/write intensive NFS
workloads, and support larger atomic read and write operations on servers
that support them.
Test-plan:
Connectathon and iozone on mount point with wsize=rsize>32768 over TCP.
Tests with NFS over UDP to verify the maximum RPC payload size cap.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Optimise attribute revalidation when hardlinking. Add post-op attributes
for the directory and the original inode.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
"Optional" means that the close call will not fail if the getattr
at the end of the compound fails.
If it does succeed, try to refresh inode attributes.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Since the directory attributes change every time we CREATE a file,
we might as well pick up the new directory attributes in the same
compound.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Allow nfs_refresh_inode() also to update attributes on the inode if the
RPC call was sent after the last call to nfs_update_inode().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Make NFSv4 return the fully initialized file pointer with the
stateid that it created in the lookup w/intent.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Once the state_owner and lock_owner semaphores get removed, it will be
possible for other OPEN requests to reopen the same file if they have
lower sequence ids than our CLOSE call.
This patch ensures that we recheck the file state once
nfs_wait_on_sequence() has completed waiting.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
NFSv4 file state-changing functions such as OPEN, CLOSE, LOCK,... are all
labelled with "sequence identifiers" in order to prevent the server from
reordering RPC requests, as this could cause its file state to
become out of sync with the client.
Currently the NFS client code enforces this ordering locally using
semaphores to restrict access to structures until the RPC call is done.
This, of course, only works with synchronous RPC calls, since the
user process must first grab the semaphore.
By dropping semaphores, and instead teaching the RPC engine to hold
the RPC calls until they are ready to be sent, we can extend this
process to work nicely with asynchronous RPC calls too.
This patch adds a new list called "rpc_sequence" that defines the order
of the RPC calls to be sent. We add one such list for each state_owner.
When an RPC call is ready to be sent, it checks if it is top of the
rpc_sequence list. If so, it proceeds. If not, it goes back to sleep,
and loops until it hits top of the list.
Once the RPC call has completed, it can then bump the sequence id counter,
and remove itself from the rpc_sequence list, and then wake up the next
sleeper.
Note that the state_owner sequence ids and lock_owner sequence ids are
all indexed to the same rpc_sequence list, so OPEN, LOCK,... requests
are all ordered w.r.t. each other.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This adds acl support fo nfs clients via the NFSACL protocol extension, by
implementing the getxattr, listxattr, setxattr, and removexattr iops for the
system.posix_acl_access and system.posix_acl_default attributes. This patch
implements a dumb version that uses no caching (and thus adds some overhead).
(Another patch in this patchset adds caching as well.)
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Client-side support for NFSv4 acls: xdr encoding and decoding routines for
writing acls
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Client-side support for NFSv4 acls: xdr encoding and decoding routines for
reading acls
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
ACL support will require supporting additional inode operations in v4
(getxattr, setxattr, listxattr). This patch allows different protocol versions
to support different inode operations by adding a file_inode_ops to the
nfs_rpc_ops (to match the existing dir_inode_ops).
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
