Commit graph

29 commits

Author SHA1 Message Date
Ilya Dryomov
922dab6134 libceph, rbd: ceph_osd_linger_request, watch/notify v2
This adds support and switches rbd to a new, more reliable version of
watch/notify protocol.  As with the OSD client update, this is mostly
about getting the right structures linked into the right places so that
reconnects are properly sent when needed.  watch/notify v2 also
requires sending regular pings to the OSDs - send_linger_ping().

A major change from the old watch/notify implementation is the
introduction of ceph_osd_linger_request - linger requests no longer
piggy back on ceph_osd_request.  ceph_osd_event has been merged into
ceph_osd_linger_request.

All the details are now hidden within libceph, the interface consists
of a simple pair of watch/unwatch functions and ceph_osdc_notify_ack().
ceph_osdc_watch() does return ceph_osd_linger_request, but only to keep
the lifetime management simple.

ceph_osdc_notify_ack() accepts an optional data payload, which is
relayed back to the notifier.

Portions of this patch are loosely based on work by Douglas Fuller
<dfuller@redhat.com> and Mike Christie <michaelc@cs.wisc.edu>.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 01:15:02 +02:00
Ilya Dryomov
5aea3dcd50 libceph: a major OSD client update
This is a major sync up, up to ~Jewel.  The highlights are:

- per-session request trees (vs a global per-client tree)
- per-session locking (vs a global per-client rwlock)
- homeless OSD session
- no ad-hoc global per-client lists
- support for pool quotas
- foundation for watch/notify v2 support
- foundation for map check (pool deletion detection) support

The switchover is incomplete: lingering requests can be setup and
teared down but aren't ever reestablished.  This functionality is
restored with the introduction of the new lingering infrastructure
(ceph_osd_linger_request, linger_work, etc) in a later commit.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 01:14:03 +02:00
Ilya Dryomov
bb873b5391 libceph: switch to calc_target(), part 2
The crux of this is getting rid of ceph_osdc_build_request(), so that
MOSDOp can be encoded not before but after calc_target() calculates the
actual target.  Encoding now happens within ceph_osdc_start_request().

Also nuked is the accompanying bunch of pointers into the encoded
buffer that was used to update fields on each send - instead, the
entire front is re-encoded.  If we want to support target->name_len !=
base->name_len in the future, there is no other way, because oid is
surrounded by other fields in the encoded buffer.

Encoding OSD ops and adding data items to the request message were
mixed together in osd_req_encode_op().  While we want to re-encode OSD
ops, we don't want to add duplicate data items to the message when
resending, so all call to ceph_osdc_msg_data_add() are factored out
into a new setup_request_data().

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:27 +02:00
Ilya Dryomov
a66dd38309 libceph: switch to calc_target(), part 1
Replace __calc_request_pg() and most of __map_request() with
calc_target() and start using req->r_t.

ceph_osdc_build_request() however still encodes base_oid, because it's
called before calc_target() is and target_oid is empty at that point in
time; a printf in osdc_show() also shows base_oid.  This is fixed in
"libceph: switch to calc_target(), part 2".

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:26 +02:00
Ilya Dryomov
04812acf57 libceph: pi->min_size, pi->last_force_request_resend
Add and decode pi->min_size and pi->last_force_request_resend.  These
are going to be used by calc_target().

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:26 +02:00
Ilya Dryomov
d30291b985 libceph: variable-sized ceph_object_id
Currently ceph_object_id can hold object names of up to 100
(CEPH_MAX_OID_NAME_LEN) characters.  This is enough for all use cases,
expect one - long rbd image names:

- a format 1 header is named "<imgname>.rbd"
- an object that points to a format 2 header is named "rbd_id.<imgname>"

We operate on these potentially long-named objects during rbd map, and,
for format 1 images, during header refresh.  (A format 2 header name is
a small system-generated string.)

Lift this 100 character limit by making ceph_object_id be able to point
to an externally-allocated string.  Apart from being able to work with
almost arbitrarily-long named objects, this allows us to reduce the
size of ceph_object_id from >100 bytes to 64 bytes.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 00:36:22 +02:00
Ilya Dryomov
82dcabad75 libceph: revamp subs code, switch to SUBSCRIBE2 protocol
It is currently hard-coded in the mon_client that mdsmap and monmap
subs are continuous, while osdmap sub is always "onetime".  To better
handle full clusters/pools in the osd_client, we need to be able to
issue continuous osdmap subs.  Revamp subs code to allow us to specify
for each sub whether it should be continuous or not.

Although not strictly required for the above, switch to SUBSCRIBE2
protocol while at it, eliminating the ambiguity between a request for
"every map since X" and a request for "just the latest" when we don't
have a map yet (i.e. have epoch 0).  SUBSCRIBE2 feature bit is now
required - it's been supported since pre-argonaut (2010).

Move "got mdsmap" call to the end of ceph_mdsc_handle_map() - calling
in before we validate the epoch and successfully install the new map
can mess up mon_client sub state.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-25 18:51:38 +01:00
Ilya Dryomov
5cf7bd3012 libceph: expose client options through debugfs
Add a client_options attribute for showing libceph options.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2015-04-20 18:55:39 +03:00
Ilya Dryomov
7a6fdeb2b1 libceph: nuke pool op infrastructure
On Mon, Dec 22, 2014 at 5:35 PM, Sage Weil <sage@newdream.net> wrote:
> On Mon, 22 Dec 2014, Ilya Dryomov wrote:
>> Actually, pool op stuff has been unused for over two years - looks like
>> it was added for rbd create_snap and that got ripped out in 2012.  It's
>> unlikely we'd ever need to manage pools or snaps from the kernel client
>> so I think it makes sense to nuke it.  Sage?
>
> Yep!

Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
2015-02-19 13:31:37 +03:00
Ilya Dryomov
25f897773b libceph: separate multiple ops with commas in debugfs output
For requests with multiple ops, separate ops with commas instead of \t,
which is a field separator here.

Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-14 12:57:03 -07:00
Ilya Dryomov
513a8243d6 libceph: mon_get_version request infrastructure
Add support for mon_get_version requests to libceph.  This reuses much
of the ceph_mon_generic_request infrastructure, with one exception.
Older OSDs don't set mon_get_version reply hdr->tid even if the
original request had a non-zero tid, which makes it impossible to
lookup ceph_mon_generic_request contexts by tid in get_generic_reply()
for such replies.  As a workaround, we allocate a reply message on the
reply path.  This can probably interfere with revoke, but I don't see
a better way.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-06-06 09:29:57 +08:00
Ilya Dryomov
002b36ba5e libceph: recognize poolop requests in debugfs
Recognize poolop requests in debugfs monc dump, fix prink format
specifiers - tid is unsigned.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-06-06 09:29:56 +08:00
Ilya Dryomov
8a53f23fcd libceph: dump pool {read,write}_tier to debugfs
Dump pool {read,write}_tier to debugfs.  While at it, fixup printk type
specifiers and remove the unnecessary cast to unsigned long long.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
2014-04-04 21:08:29 -07:00
Ilya Dryomov
2cfa34f2d6 libceph: primary_affinity infrastructure
Add primary_affinity infrastructure.  primary_affinity values are
stored in an max_osd-sized array, hanging off ceph_osdmap, similar to
a osd_weight array.

Introduce {get,set}_primary_affinity() helpers, primarily to return
CEPH_OSD_DEFAULT_PRIMARY_AFFINITY when no affinity has been set and to
abstract out osd_primary_affinity array allocation and initialization.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:08:02 -07:00
Ilya Dryomov
9686f94c8c libceph: primary_temp infrastructure
Add primary_temp mappings infrastructure.  struct ceph_pg_mapping is
overloaded, primary_temp mappings are stored in an rb-tree, rooted at
ceph_osdmap, in a manner similar to pg_temp mappings.

Dump primary_temp mappings to /sys/kernel/debug/ceph/<client>/osdmap,
one 'primary_temp <pgid> <osd>' per line, e.g:

    primary_temp 2.6 4

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:07:58 -07:00
Ilya Dryomov
35a935d75d libceph: generalize ceph_pg_mapping
In preparation for adding support for primary_temp mappings, generalize
struct ceph_pg_mapping so it can hold mappings other than pg_temp.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:07:57 -07:00
Ilya Dryomov
1c00240e00 libceph: dump pg_temp mappings to debugfs
Dump pg_temp mappings to /sys/kernel/debug/ceph/<client>/osdmap,
one 'pg_temp <pgid> [<osd>, ..., <osd>]' per line, e.g:

    pg_temp 2.6 [2,3,4]

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:07:34 -07:00
Ilya Dryomov
0a2800d728 libceph: do not prefix osd lines with \t in debugfs output
To save screen space in anticipation of more fields (e.g. primary
affinity).

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:07:32 -07:00
Ilya Dryomov
35fea3a18a libceph: refer to osdmap directly in osdmap_show()
To make it more readable and save screen space.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
2014-04-04 21:07:31 -07:00
Ilya Dryomov
3c972c95c6 libceph: rename ceph_osd_request::r_{oloc,oid} to r_base_{oloc,oid}
Rename ceph_osd_request::r_{oloc,oid} to r_base_{oloc,oid} before
introducing r_target_{oloc,oid} needed for redirects.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27 23:57:49 +02:00
Ilya Dryomov
4295f2217a libceph: introduce and start using oid abstraction
In preparation for tiering support, which would require having two
(base and target) object names for each osd request and also copying
those names around, introduce struct ceph_object_id (oid) and a couple
helpers to facilitate those copies and encapsulate the fact that object
name is not necessarily a NUL-terminated string.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-27 23:57:28 +02:00
Alex Elder
79528734f3 libceph: keep source rather than message osd op array
An osd request keeps a pointer to the osd operations (ops) array
that it builds in its request message.

In order to allow each op in the array to have its own distinct
data, we will need to keep track of each op's data, and that
information does not go over the wire.

As long as we're tracking the data we might as well just track the
entire (source) op definition for each of the ops.  And if we're
doing that, we'll have no more need to keep a pointer to the
wire-encoded version.

This patch makes the array of source ops be kept with the osd
request structure, and uses that instead of the version encoded in
the message in places where that was previously used.  The array
will be embedded in the request structure, and the maximum number of
ops we ever actually use is currently 2.  So reduce CEPH_OSD_MAX_OP
to 2 to reduce the size of the structure.

The result of doing this sort of ripples back up, and as a result
various function parameters and local variables become unnecessary.

Make r_num_ops be unsigned, and move the definition of struct
ceph_osd_req_op earlier to ensure it's defined where needed.

It does not yet add per-op data, that's coming soon.

This resolves:
    http://tracker.ceph.com/issues/4656

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-05-01 21:18:12 -07:00
Sage Weil
1b83bef24c libceph: update osd request/reply encoding
Use the new version of the encoding for osd requests and replies.  In the
process, update the way we are tracking request ops and reply lengths and
results in the struct ceph_osd_request.  Update the rbd and fs/ceph users
appropriately.

The main changes are:
 - we keep pointers into the request memory for fields we need to update
   each time the request is sent out over the wire
 - we keep information about the result in an array in the request struct
   where the users can easily get at it.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2013-02-26 15:02:50 -08:00
Sage Weil
4f6a7e5ee1 ceph: update support for PGID64, PGPOOL3, OSDENC protocol features
Support (and require) the PGID64, PGPOOL3, and OSDENC protocol features.
These have been present in ceph.git since v0.42, Feb 2012.  Require these
features to simplify support; nobody is running older userspace.

Note that the new request and reply encoding is still not in place, so the new
code is not yet functional.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2013-02-26 15:02:25 -08:00
Sage Weil
5b191d9914 libceph: decode into cpu-native ceph_pg type
Always decode data into our cpu-native ceph_pg type that has the correct
field widths.  Limit any remaining uses of ceph_pg_v1 to dealing with the
legacy protocol.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2013-02-26 15:01:57 -08:00
Sage Weil
d1c338a509 libceph: delay debugfs initialization until we learn global_id
The debugfs directory includes the cluster fsid and our unique global_id.
We need to delay the initialization of the debug entry until we have
learned both the fsid and our global_id from the monitor or else the
second client can't create its debugfs entry and will fail (and multiple
client instances aren't properly reflected in debugfs).

Reported by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
2012-08-20 10:03:15 -07:00
Eric Dumazet
95c9617472 net: cleanup unsigned to unsigned int
Use of "unsigned int" is preferred to bare "unsigned" in net tree.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 12:44:40 -04:00
Yehuda Sadeh
602adf4002 rbd: introduce rados block device (rbd), based on libceph
The rados block device (rbd), based on osdblk, creates a block device
that is backed by objects stored in the Ceph distributed object storage
cluster.  Each device consists of a single metadata object and data
striped over many data objects.

The rbd driver supports read-only snapshots.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20 15:38:13 -07:00
Yehuda Sadeh
3d14c5d2b6 ceph: factor out libceph from Ceph file system
This factors out protocol and low-level storage parts of ceph into a
separate libceph module living in net/ceph and include/linux/ceph.  This
is mostly a matter of moving files around.  However, a few key pieces
of the interface change as well:

 - ceph_client becomes ceph_fs_client and ceph_client, where the latter
   captures the mon and osd clients, and the fs_client gets the mds client
   and file system specific pieces.
 - Mount option parsing and debugfs setup is correspondingly broken into
   two pieces.
 - The mon client gets a generic handler callback for otherwise unknown
   messages (mds map, in this case).
 - The basic supported/required feature bits can be expanded (and are by
   ceph_fs_client).

No functional change, aside from some subtle error handling cases that got
cleaned up in the refactoring process.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20 15:37:28 -07:00