Commit graph

95 commits

Author SHA1 Message Date
David R. Bild
e0367a6156 kbuild: clear KBUILD_SRC when calling 'make' in RPM spec
'make rpm-pkg' and 'make binrpm-pkg' fail when the kernel source is
read-only.  Specifically, when the RPM spec generated by
scripts/package/mkspec is run, KBUILD_SRC happens to be set to the
source location and thus the invocation of 'make headers_install'
fails when an internal call to 'filechk' tries to write a file into
the source tree.

The fix is to clear KBUILD_SRC for the 'make headers_install'
invocation in the spec file, as is already done for the 'make
modules_install' invocation.

Signed-off-by: David R. Bild <drbild@umich.edu>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-02-22 10:57:32 +01:00
Linus Torvalds
ae3e462828 Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild changes from Michal Marek:
 "The main part of kbuild for v3.7 contains:
   - Fix for scripts/Makefile.modpost to not choke on a '.ko' substring
     in the build directory path
   - Two warning fixes (modpost and main Makefile)
   - __compiletime_error works also with gcc 4.3
   - make tar{gz,bz2,xz}-pkg uses default compression settings instead
     of saving as many bytes as possible (this should actually be in the
     misc branch, I don't know why I applied it here)."

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  compiler-gcc4.h: correct verion check for __compiletime_error
  modpost: Permit .GCC.command.line sections
  Kbuild: use normal compression settings for tar*-pkg
  scripts/Makefile.modpost: error in finding modules from .mod files.
  kbuild: Remove useless warning while appending KCFLAGS
2012-10-12 10:27:27 +09:00
Andi Kleen
b589c8ae09 Kbuild: use normal compression settings for tar*-pkg
For large kernel configurations (like a distribution kernel)
targz-pkg takes a quite long time to just do the compression.
I clocked it at 15+mins for a SUSE kernel like config on a fast
system.  And tarxz and bzip2 are even slower.

The main reason is that the script that is doing the taring sets
the highest compression level (-9).  When I change it to just
use the defaults the gzip time for the same kernel goes down
to ~3 mins. I haven't tested xz and bzip, but I expect those
to be much faster too.

I'm not willing to wait that long for a small compression
gain. So just change the script to use the defaults.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-09-27 16:56:59 +02:00
Michal Marek
fe04ddf7c2 kbuild: Do not package /boot and /lib in make tar-pkg
There were reports of users destroying their Fedora installs by a kernel
tarball that replaces the /lib -> /usr/lib symlink. Let's remove the
toplevel directories from the tarball to prevent this from happening.

Reported-by: Andi Kleen <andi@firstfloor.org>
Suggested-by: Ben Hutchings <ben@decadent.org.uk>
Cc: <stable@kernel.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-09-27 16:26:19 +02:00
maximilian attems
5f011d7159 deb-pkg: Add all Makefiles to header package
I discovered that make deb-pkg does not add Makefile_32.cpu from
arch/x86 directory when doing i386 kernel build and package build.
Fix it by greedily adding all Makefiles.

Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl>
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-06-28 10:48:08 +02:00
maximilian attems
6607ddadf9 deb-pkg: Install linux-firmware-image in versioned dir
That way they don't file conflict with official firmware package:
 trying to overwrite '/lib/firmware/qlogic/1040.bin', which is
               also in package firmware-qlogic 0.35
..

Reported-by: Michael Prokop <mika@debian.org>
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-06-28 10:46:25 +02:00
Lekensteyn
19a4b98895 builddeb: include autogenerated header files
After 303395ac3b, some headers are
autogenerated. Include these autogenerated headers (mainly
unistd_32_ia32.h) in out-of-tree builds to allow DKMS modules to be
built succesfully.

Signed-off-by: Peter Lekensteyn <lekensteyn@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-05-26 22:54:50 +02:00
Joerg Roedel
dddcbb7ce3 kbuild: Fix out-of-tree build for 'make deb-pkg'
The out-of-tree build is broken in 'make deb-pkg'. The
header checks and the header install works on the source and
not on the object tree.
While fixing this also replace the direct 'make' invocations
with the $MAKE variable to be consistent within the script.

Cc: maximilian attems <max@stro.at>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: debian-kernel@lists.debian.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-02-25 00:01:28 +01:00
Joerg Roedel
d7d357bc27 kbuild: Only build linux-image package for UML
For user-mode Linux the other packages are not required. So
only build the package with the linux-image in it.

Cc: maximilian attems <max@stro.at>
Cc: debian-kernel@lists.debian.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Tested-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-02-24 23:55:23 +01:00
Joerg Roedel
a47b6c61f5 kbuild: Fix link to headers in 'make deb-pkg'
The Link to the kernel header files in the debian packages
point to the original build directory. This is a bad choice
if the packages were installed on a different machine. Fix
this in by manually re-creating the link in the builddeb
script.

Cc: maximilian attems <max@stro.at>
Cc: debian-kernel@lists.debian.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-02-24 23:54:29 +01:00
Ben Hutchings
6c63522460 builddeb: Don't create files in /tmp with predictable names
The current use of /tmp for file lists is insecure.  Put them under
$objtree/debian instead.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: stable@vger.kernel.org  # 2.6.39+
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-02-18 22:33:26 +01:00
Paul Menzel
0f60be20ca scripts/package/Makefile: Fix typo: an deb -> a deb
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-29 21:15:07 +02:00
matt mooney
3bdccc880b package: Makefile: fix perf target bug
Specify --git-dir when building perf targets to allow out-of-tree
builds using O=<build-dir>.

The shell command in `git archive' had to be modified to allow proper
file name expansion of the files listed in MANIFEST.

Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-06-24 15:20:55 +02:00
Linus Torvalds
62af8163f9 Merge branch 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  kbuild: Create a kernel-headers RPM
  rpm-pkg: Fix when current directory is a symlink
  Replace '-' in kernel version with '_'
2011-05-25 12:03:47 -07:00
Arun Sharma
0bd41dfc9f kbuild: Create a kernel-headers RPM
To compile binaries which depend on new kernel interfaces, we need a
kernel-headers RPM

Signed-off-by: Arun Sharma <asharma@fb.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-24 18:28:29 +02:00
Michal Marek
857c7e4387 rpm-pkg: Fix when current directory is a symlink
The better fix would be to stop using the parent directory (principle of
least surprise), but as long as we use it, use it consistently.

Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-24 17:44:00 +02:00
Arun Sharma
e1287eb891 Replace '-' in kernel version with '_'
Removing the '-' results in hard to read filenames such as:
kernel-2.6.35.2000042g76e4caf-28.x86_64.rpm

kernel-2.6.35.2_000042_g76e4caf-28.x86_64.rpm is easier to
read.

Signed-off-by: Arun Sharma <asharma@fb.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-04 23:07:48 +02:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Zdenek Kaspar
9a17f40048 kbuild: Add make tarxz-pkg build option
Signed-off-by: Zdenek Kaspar <zkaspar82@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-03-09 16:18:06 +01:00
Michal Marek
2d8ad87195 Merge commit 'v2.6.38-rc1' into kbuild/packaging 2011-03-09 16:15:44 +01:00
Nicolas de Pesloüan
9b4ce7bce5 deb-pkg: Fix building outside of source tree (O=...).
When building linux-headers package using deb-pkg, builddeb erroneously assume
current directory is the source tree. This is not true if building in another
directory, using make O=... deb-pkg.

This patch fix this problem.

Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr>
Tested-by: Nikolai Kondrashov <spbnick@gmail.com>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-02-04 14:53:45 +01:00
maximilian attems
1b9a50d931 deb-pkg: Use $SRCARCH for include path
Fix x86 centric path to allow building kernel-header packages for
other architecture.

Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-01-15 00:42:44 +01:00
Linus Torvalds
1693ed284f Merge branch 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  deb-pkg: s/hdr/kernel_headers_/ && s/header/libc_headers_/
  deb-pkg: Make deb-pkg generate a seperate linux-libc-dev deb
  kbuild: create linux-headers package in deb-pkg
  kbuild, deb-pkg: support overriding userland architecture
  kbuild, deb-pkg: select userland architecture based on UTS_MACHINE
  kbuild, deb-pkg: Fix build with paranoid umask
2011-01-10 08:28:38 -08:00
maximilian attems
ee81b786a0 deb-pkg: s/hdr/kernel_headers_/ && s/header/libc_headers_/
hdrpackage and headerpackage are not intuitive names,
use proposed alternatives by Michel Marek.

While touching them move the mkdir of the kernel_headers dir up
and fix it for paranoid umask.

CC: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-01-07 22:45:25 +01:00
maximilian attems
e68077856e deb-pkg: Make deb-pkg generate a seperate linux-libc-dev deb
userland dev likes latest incarnation of that userland API.
make it easy to also build it on make deb-pkg invocation:

dpkg-deb: building package `linux-libc-dev' in `../linux-libc-dev_2.6.32-rc6-4_amd64.deb'.

Last year patch rebased on top of latest deb-pkg changes.

Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-01-07 16:16:48 +01:00
Theodore Ts'o
cd8d60a20a kbuild: create linux-headers package in deb-pkg
Create a linux-headers-$KVER.deb package which can be used to build
external modules without having the source tree around.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-12-29 13:54:49 +01:00
Asbjoern Sloth Toennesen
55f88eccf9 kbuild, deb-pkg: support overriding userland architecture
Usefull if building for sparc64 userland, because the
sparc and sparc64 userlands use the same 64-bit kernel,
making it impossible to always select the correct userland
architecture for the resulting debian package.

Might also be usefull, if you want a i386 userland with a amd64 kernel.

Example usage:
	make KBUILD_DEBARCH=i386 deb-pkg

LKML-reference: <alpine.DEB.2.02.1011051437500.13287@aurora.sdinet.de>
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-12-20 16:52:31 +01:00
Asbjoern Sloth Toennesen
10f26fa642 kbuild, deb-pkg: select userland architecture based on UTS_MACHINE
Instead of creating the debian package for the compiling userland,
create it for a userland matching the kernel thats being compiled.

This patch supports all Lenny release architectures,
and Linux-based architecture candidates for Squeeze.

If it can't find a proper Debian userspace it displays a warning,
and fallback to let deb-gencontrol use the host's userspace arch.

Eg. with this patch the following make command:

	make ARCH=i386 deb-pkg

will output an i386 Debian package instead of an amd64 one,
when run on an amd64 machine.

Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-11-25 15:32:05 +01:00
maximilian attems
e86c2412c8 kbuild, deb-pkg: Fix build with paranoid umask
umask 077
make deb-pkg
<snipp ..>
dpkg-deb: building package `linux-image-2.6.36+' in `../linux-image-2.6.36+_2.6.36+-4_amd64.deb'.
dpkg-deb: control directory has bad permissions 700 (must be >=0755 and <=0775)
make[1]: *** [deb-pkg] Error 2

Reported-by: Bastian Blank <waldi@debian.org>
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-11-11 16:32:43 +01:00
Linus Torvalds
2301b65b86 Merge branch 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  scripts/package: don't break if %{_smp_mflags} isn't set
  kbuild, deb-pkg: Check if KBUILD_IMAGE exists before copying it
2010-10-28 16:19:38 -07:00
Nishanth Aravamudan
c2d5a7300d scripts/package: don't break if %{_smp_mflags} isn't set
Same fix as in 13797b77d4 is needed for the "new"
line invoking _smp_mflags for modules_install. Without the fix, `make
binrpm-pkg` fails with:

+ make '%{_smp_mflags}' KBUILD_SRC= modules_install
make[2]: warning: jobserver unavailable: using -j1.  Add `+' to parent make rule.
make[2]: *** No rule to make target `%{_smp_mflags}'.  Stop.
error: Bad exit status from /var/tmp/rpm-tmp.8S9B9e (%install)

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-10-14 00:01:16 +02:00
Guillem Jover
242c5ab08c kbuild, deb-pkg: Check if KBUILD_IMAGE exists before copying it
Avoid an error when doing cp over the image when it does not contain
the full path to the file.

Signed-off-by: Guillem Jover <guillem@hadrons.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-09-06 13:29:02 +02:00
Linus Torvalds
4aed2fd8e3 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (162 commits)
  tracing/kprobes: unregister_trace_probe needs to be called under mutex
  perf: expose event__process function
  perf events: Fix mmap offset determination
  perf, powerpc: fsl_emb: Restore setting perf_sample_data.period
  perf, powerpc: Convert the FSL driver to use local64_t
  perf tools: Don't keep unreferenced maps when unmaps are detected
  perf session: Invalidate last_match when removing threads from rb_tree
  perf session: Free the ref_reloc_sym memory at the right place
  x86,mmiotrace: Add support for tracing STOS instruction
  perf, sched migration: Librarize task states and event headers helpers
  perf, sched migration: Librarize the GUI class
  perf, sched migration: Make the GUI class client agnostic
  perf, sched migration: Make it vertically scrollable
  perf, sched migration: Parameterize cpu height and spacing
  perf, sched migration: Fix key bindings
  perf, sched migration: Ignore unhandled task states
  perf, sched migration: Handle ignored migrate out events
  perf: New migration tool overview
  tracing: Drop cpparg() macro
  perf: Use tracepoint_synchronize_unregister() to flush any pending tracepoint call
  ...

Fix up trivial conflicts in Makefile and drivers/cpufreq/cpufreq.c
2010-08-06 09:30:52 -07:00
Linus Torvalds
27b4a1a9ea Merge branch 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  kbuild: Change section of generated debian packages to kernel
  kbuild: Mark that the packages generated conform to Standards-Version 3.8.4
  kbuild: Add homepage field to debian/control file
2010-08-05 14:19:50 -07:00
Ingo Molnar
3772b73472 Merge commit 'v2.6.35' into perf/core
Conflicts:
	tools/perf/Makefile
	tools/perf/util/hist.c

Merge reason: Resolve the conflicts and update to latest upstream.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-02 08:31:54 +02:00
Michal Marek
b003afe32f kbuild: Fix make rpm
make rpm was broken by commit 0915512:
make clean
set -e; cd ..; ln -sf /usr/src/iwlwifi-2.6 kernel-2.6.35rc4wl
/bin/sh /usr/src/iwlwifi-2.6/scripts/setlocalversion --scm-only >
/usr/src/iwlwifi-2.6/.scmversion
cat: .scmversion: input file is output file
make[1]: *** [rpm] Error 1

Reported-and-tested-by: "Zheng, Jiajia" <jiajia.zheng@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-07-21 16:06:05 +02:00
Ingo Molnar
08f8ba0799 Merge commit 'v2.6.35-rc4' into perf/core
Merge reason: Pick up the latest perf fixes

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-07-05 08:30:58 +02:00
Michal Marek
62052be3a7 Merge branch 'setlocalversion-speedup' into kbuild/rc-fixes
Conflicts:
	Makefile
2010-07-02 11:56:52 +02:00
Michal Marek
09155120cf kbuild: Clean up and speed up the localversion logic
Now that we run scripts/setlocalversion during every build, it makes
sense to move all the localversion logic there. This cleans up the
toplevel Makefile and also makes sure that the script is called only
once in 'make prepare' (previously, it would be called every time due to
a variable expansion in an ifneq statement). No user-visible change is
intended, unless one runs the setlocalversion script directly.

Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-06-18 14:23:21 +02:00
Ingo Molnar
646b1db495 Merge commit 'v2.6.35-rc3' into perf/core
Merge reason: Go from -rc1 base to -rc3 base, merge in fixes.
2010-06-18 10:53:19 +02:00
Arnaldo Carvalho de Melo
8e5564e6c7 perf tools: Make target to generate self contained source tarball
Useful for when people want to try some version of the perf tools and don't
wants to download the kernel tarball.

Here is a session using this new target:

  [root@emilia linux-2.6-tip]# make help | grep -i perf
    perf-tar-src-pkg    - Build perf-2.6.35-rc1.tar source tarball
    perf-targz-src-pkg  - Build perf-2.6.35-rc1.tar.gz source tarball
    perf-tarbz2-src-pkg - Build perf-2.6.35-rc1.tar.bz2 source tarball
  [root@emilia linux-2.6-tip]# make perf-tarbz2-src-pkg
    TAR
  [root@emilia linux-2.6-tip]# ls -la perf-2.6.35-rc1.tar.bz2
  -rw-r--r-- 1 root root 295731 May 31 11:18 perf-2.6.35-rc1.tar.bz2
  [root@emilia linux-2.6-tip]# tar xf perf-2.6.35-rc1.tar.bz2
  [root@emilia linux-2.6-tip]# cd perf-2.6.35-rc1
  [root@emilia perf-2.6.35-rc1]# ls
  arch  HEAD  include  lib  tools
  [root@emilia perf-2.6.35-rc1]# cd tools/perf
  [root@emilia perf]# make -j9 2>&1 | tail
      CC arch/x86/util/dwarf-regs.o
      CC util/probe-finder.o
      CC util/newt.o
      CC util/scripting-engines/trace-event-perl.o
      CC scripts/perl/Perf-Trace-Util/Context.o
      CC perf.o
      CC builtin-help.o
      AR libperf.a
      LINK perf
  rm .perf.dev.null
  [root@emilia perf]# ./perf record -a sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.262 MB perf.data (~11457 samples) ]
  [root@emilia perf]# ./perf report | head -12
  # Events: 6K cycles
  #
  # Overhead          Command       Shared Object  Symbol
  # ........  ...............  ..................  ......
  #
       4.73%             perf  [kernel.kallsyms]   [k] format_decode
       4.49%             perf  libc-2.12.so        [.] _IO_file_underflow_internal
       4.38%             init  [kernel.kallsyms]   [k] mwait_idle
       3.29%             perf  [kernel.kallsyms]   [k] vsnprintf
       2.38%             init  [kernel.kallsyms]   [k] sched_clock_local
       2.35%             init  [kernel.kallsyms]   [k] apic_timer_interrupt
       1.86%     sirq-timer/5  [kernel.kallsyms]   [k] find_busiest_group
  [root@emilia perf]#

Acked-by: Michal Marek <mmarek@suse.cz>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20100528185357.GA28009@ghostprotocols.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-06-05 09:33:35 -03:00
Rogério Brito
aa42abedc3 kbuild: Change section of generated debian packages to kernel
To follow the way that Official Debian kernel packages are made, put the
generated packages in the right section, the kernel section.  This also
avoids polluting the admin section.

Signed-off-by: Rogério Brito <rbrito@ime.usp.br>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-06-03 13:17:53 +02:00
Rogério Brito
2d7204ac60 kbuild: Mark that the packages generated conform to Standards-Version 3.8.4
The packages generated by the builddeb script conform to the Debian
Policy version 3.8.4. Make this explicit in the generated packages.

Signed-off-by: Rogério Brito <rbrito@ime.usp.br>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-06-03 13:17:52 +02:00
Rogério Brito
ee6eed803d kbuild: Add homepage field to debian/control file
This helps when the user sees information of the packages on package
managers like aptitude.

Signed-off-by: Rogério Brito <rbrito@ime.usp.br>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-06-03 13:17:52 +02:00
Linus Torvalds
1f73897861 Merge branch 'for-35' of git://repo.or.cz/linux-kbuild
* 'for-35' of git://repo.or.cz/linux-kbuild: (81 commits)
  kbuild: Revert part of e8d400a to resolve a conflict
  kbuild: Fix checking of scm-identifier variable
  gconfig: add support to show hidden options that have prompts
  menuconfig: add support to show hidden options which have prompts
  gconfig: remove show_debug option
  gconfig: remove dbg_print_ptype() and dbg_print_stype()
  kconfig: fix zconfdump()
  kconfig: some small fixes
  add random binaries to .gitignore
  kbuild: Include gen_initramfs_list.sh and the file list in the .d file
  kconfig: recalc symbol value before showing search results
  .gitignore: ignore *.lzo files
  headerdep: perlcritic warning
  scripts/Makefile.lib: Align the output of LZO
  kbuild: Generate modules.builtin in make modules_install
  Revert "kbuild: specify absolute paths for cscope"
  kbuild: Do not unnecessarily regenerate modules.builtin
  headers_install: use local file handles
  headers_check: fix perl warnings
  export_report: fix perl warnings
  ...
2010-06-01 08:55:52 -07:00
Gilles Espinasse
f77f13e22d Fix comment and Kconfig typos for 'require' and 'fragment'
Signed-off-by: Gilles Espinasse <g.esp@free.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-29 15:41:47 +02:00
FEJES Jozsef
b59a122584 kbuild: deb-pkg md5sums
This patch creates the standard md5sums file for 'make deb-pkg' just
like the dh_md5sums debhelper script.

Signed-off-by: Jozsef Fejes <fejes@joco.name>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-03-07 13:33:00 +01:00
John Saalwaechter
880df92fa0 scripts: use %_tmppath in "make rpm-pkg"
The mkspec script hardcodes "/var/tmp" into the generated rpm spec file's
BuildRoot. The user, however, may have a custom setting for %_tmppath,
which should be used in BuildRoot.  This patch changes mkspec's
BuildRoot output to appropriately use %_tmppath.

Signed-off-by: John Saalwaechter <saalwaechter@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-02-02 14:33:56 +01:00
Jonathan Nieder
db1d18657c scripts/package: deb-pkg: use fakeroot if available
Running "make deb-pkg" requires setting KBUILD_PKG_ROOTCMD or
becoming root oneself or it errors out.  Unless already running
as root or KBUILD_PKG_ROOTCMD is already set, use fakeroot as a
good default.

With this patch applied, you can run "make oldconfig deb-pkg" as
an ordinary user to build a binary package for an updated kernel
tree and it should just work.

fakeroot is too zealous by default in treating files as owned by
root.  Its wrapped stat() sets st_uid and st_gid to 0 for all
files, which causes Git to go on a wild goose chase if
CONFIG_LOCALVERSION_AUTO is set, checking if any file's content
has changed along with its stat information.  Avoid this by
telling fakeroot to use the actual owner and group for
preexisting files, by passing it the -u option.

Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-12 13:08:16 +01:00
Jonathan Nieder
05ba4488a5 scripts/package: add KBUILD_PKG_ROOTCMD variable
Let the deb-pkg target acquire (fake) root privileges before
running commands that need them.  Without such privileges,
deb-pkg errors out because chown fails.

The new KBUILD_PKG_ROOTCMD variable, if defined, is used as a
command to run other commands with possibly fake elevated
privileges.  Since this is not needed for the tar-pkg and rpm-pkg
targets, it is only used by deb-pkg.  If it is not defined, the
behavior is as before, and the user will have to rerun make as
root.

In other words, as a shortcut, instead of running 'make oldconfig &&
make && fakeroot -u make deb-pkg', one can use the single command
'make oldconfig deb-pkg KBUILD_PKG_ROOTCMD="fakeroot -u"'.

Suggested-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-12 13:08:15 +01:00