Commit graph

8 commits

Author SHA1 Message Date
Thierry Reding
2b9b162034 pwm-backlight: Add optional enable GPIO
To support a wider variety of backlight setups, introduce an optional
enable GPIO. Legacy users of the platform data already have a means of
supporting GPIOs by using the .init(), .exit() and .notify() hooks. DT
users however cannot use those, so an alternative method is required.

In order to ease the introduction of the optional enable GPIO, make it
available in the platform data first, so that existing users can be
converted. Once that has happened a second patch will add code to make
use of it in the driver.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-16 09:05:57 +02:00
Thierry Reding
3e3ed6cdc4 pwm-backlight: Add rudimentary device tree support
This commit adds very basic support for device tree probing. Currently,
only a PWM and a list of distinct brightness levels can be specified.
Enabling or disabling backlight power via GPIOs is not yet supported.

Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-07-23 13:23:52 +02:00
Dilan Lee
cc7993f643 backlight: add a callback 'notify_after' for backlight control
We need a callback to do some things after pwm_enable, pwm_disable
and pwm_config.

Signed-off-by: Dilan Lee <dilee@nvidia.com>
Reviewed-by: Robert Morell <rmorell@nvidia.com>
Reviewed-by: Arun Murthy <arun.murthy@stericsson.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-25 16:25:34 -07:00
Robert Morell
ef0a5e80f5 pwm_backlight: add check_fb() hook
In systems with multiple framebuffer devices, one of the devices might be
blanked while another is unblanked.  In order for the backlight blanking
logic to know whether to turn off the backlight for a particular
framebuffer's blanking notification, it needs to be able to check if a
given framebuffer device corresponds to the backlight.

This plumbs the check_fb hook from core backlight through the
pwm_backlight helper to allow platform code to plug in a check_fb hook.

Signed-off-by: Robert Morell <rmorell@nvidia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Arun Murthy <arun.murthy@stericsson.com>
Cc: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:00 -07:00
Arun Murthy
fef7764f8b backlight: add low threshold to pwm backlight
The intensity of the backlight can be varied from a range of
max_brightness to zero.  Though most, if not all the pwm based backlight
devices start flickering at lower brightness value.  And also for each
device there exists a brightness value below which the backlight appears
to be turned off though the value is not equal to zero.

If the range of brightness for a device is from zero to max_brightness.  A
graph is plotted for brightness Vs intensity for the pwm based backlight
device has to be a linear graph.

intensity
	  |   /
	  |  /
	  | /
	  |/
	  ---------
	 0	max_brightness

But pratically on measuring the above we note that the intensity of
backlight goes to zero(OFF) when the value in not zero almost nearing to
zero(some x%).  so the graph looks like

intensity
	  |    /
	  |   /
	  |  /
	  |  |
	  ------------
	 0   x	 max_brightness

In order to overcome this drawback knowing this x% i.e nothing but the low
threshold beyond which the backlight is off and will have no effect, the
brightness value is being offset by the low threshold value(retaining the
linearity of the graph).  Now the graph becomes

intensity
	  |     /
	  |    /
	  |   /
	  |  /
	  -------------
	   0	  max_brightness

With this for each and every digit increment in the brightness from zero
there is a change in the intensity of backlight.  Devices having this
behaviour can set the low threshold brightness(lth_brightness) and pass
the same as platform data else can have it as zero.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Arun Murthy <arun.murthy@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12 07:55:33 -08:00
Ben Dooks
cfc3899fcd backlight: Pass device through notify callback in the pwm driver
Add the device to the notify callback's arguments in the PWM backlight 
driver. This brings the notify callback into line with the other 
callbacks defined by this driver.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-12-17 11:46:01 +00:00
Philipp Zabel
3b73125af6 [ARM] 5044/1: pwm_bl: add init/notify/exit callbacks
This allows platform code to manipulate GPIOs and brightness level as
needed.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-03 13:25:05 +01:00
eric miao
42796d37da [ARM] pxa: add generic PWM backlight driver
Patch mostly from Eric Miao, with minor edits by rmk to convert
Eric's driver to a generic PWM-based backlight driver.

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-03 13:25:00 +01:00