Commit graph

47 commits

Author SHA1 Message Date
Matthew Wilcox
61a44b9c4b [NET]: ethtool ops are the only way
During the transition to the ethtool_ops way of doing things, we supported
calling the device's ->do_ioctl method to allow unconverted drivers to
continue working.  Those days are long behind us, all in-tree drivers
use the ethtool_ops way, and so we no longer need to support this.

The bonding driver is the biggest beneficiary of this; it no longer
needs to call ioctl() as a fallback if ethtool_ops aren't supported.

Also put a proper copyright statement on ethtool.c.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31 14:00:02 -07:00
Andrew Morton
3f5f4346b6 [8021Q]: vlan_ioctl_handler: fix return value
net/8021q/vlan.c: In function 'vlan_ioctl_handler':
net/8021q/vlan.c:700: warning: 'err' may be used uninitialized in this function

The warning is incorrect, but from my reading this ioctl will return -EINVAL
on success.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-24 15:37:11 -07:00
Patrick McHardy
a7ecfc8665 [VLAN]: Fix memset length
Fix sizeof(ETH_ALEN) Introduced by my rtnl_link patches.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 18:56:30 -07:00
Patrick McHardy
56addd6eee [VLAN]: Use multicast list synchronization helpers
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 18:53:28 -07:00
Patrick McHardy
6c78dcbd47 [VLAN]: Fix promiscous/allmulti synchronization races
The set_multicast_list function may be called without holding the rtnl
mutex, resulting in races when changing the underlying device's promiscous
and allmulti state. Use the change_rx_mode hook, which is always invoked
under the rtnl.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 18:52:56 -07:00
Patrick McHardy
0e06877c6f [RTNETLINK]: rtnl_link: allow specifying initial device address
Drivers need to validate the initial addresses in their netlink attribute
validation function or manually reject them if they can't support this.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-11 19:45:36 -07:00
Patrick McHardy
2d85cba2b2 [RTNETLINK]: rtnl_link API simplification
All drivers need to unregister their devices in the module unload function.
While doing so they must hold the rtnl and atomically unregister the
rtnl_link ops as well. This makes the rtnl_link_unregister function that
takes the rtnl itself completely useless.

Provide default newlink/dellink functions, make __rtnl_link_unregister and
rtnl_link_unregister unregister all devices with matching rtnl_link_ops and
change the existing users to take advantage of that.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-11 19:45:33 -07:00
Patrick McHardy
8c979c26a0 [VLAN]: Fix MAC address handling
The VLAN MAC address handling is broken in multiple ways. When the address
differs when setting it, the real device is put in promiscous mode twice,
but never taken out again. Additionally it doesn't resync when the real
device's address is changed and needlessly puts it in promiscous mode when
the vlan device is still down.

Fix by moving address handling to vlan_dev_open/vlan_dev_stop and properly
deal with address changes in the device notifier. Also switch to
dev_unicast_add (which needs the exact same handling).

Since the set_mac_address handler is identical to the generic ethernet one
with these changes, kill it and use ether_setup().

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-11 19:45:24 -07:00
Philippe De Muyter
56b3d975bb [NET]: Make all initialized struct seq_operations const.
Make all initialized struct seq_operations in net/ const

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 23:07:31 -07:00
Patrick McHardy
07b5b17e15 [VLAN]: Use rtnl_link API
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 22:15:03 -07:00
Patrick McHardy
a4bf3af4ac [VLAN]: Introduce symbolic constants for flag values
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 22:15:02 -07:00
Patrick McHardy
b020cb4885 [VLAN]: Keep track of number of QoS mappings
Keep track of the number of configured ingress/egress QoS mappings to
avoid iteration while calculating the netlink attribute size.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 22:15:01 -07:00
Patrick McHardy
734423cf38 [VLAN]: Use 32 bit value for skb->priority mapping
skb->priority has only 32 bits and even VLAN uses 32 bit values in its API.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 22:15:00 -07:00
Patrick McHardy
2ae0bf69b7 [VLAN]: Return proper error codes in register_vlan_device
The returned device is unused, return proper error codes instead and avoid
having the ioctl handler guess the error.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 22:14:59 -07:00
Patrick McHardy
e89fe42cd0 [VLAN]: Move device registation to seperate function
Move device registration and configuration of the underlying device to a
seperate function.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 22:14:58 -07:00
Patrick McHardy
c1d3ee9925 [VLAN]: Split up device checks
Move the checks of the underlying device to a seperate function.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 22:14:57 -07:00
Patrick McHardy
42429aaee5 [VLAN]: Move vlan_group allocation to seperate function
Move group allocation to a seperate function to clean up the code a bit
and allocate groups before registering the device. Device registration
is globally visible and causes netlink events, so we shouldn't fail
afterwards.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 22:14:40 -07:00
Patrick McHardy
2f4284a406 [VLAN]: Move some device intialization code to dev->init callback
Move some device initialization code to new dev->init callback to make
it shareable with netlink. Additionally this fixes a minor bug, dev->iflink
is set after registration, which causes an incorrect value in the initial
netlink message.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 22:14:39 -07:00
Patrick McHardy
c17d8874f9 [VLAN]: Convert name-based configuration functions to struct netdevice *
Move the device lookup and checks to the ioctl handler under the RTNL and
change all name-based interfaces to take a struct net_device * instead.

This allows to use them from a netlink interface, which identifies devices
based on ifindex not name. It also avoids races between the ioctl interface
and the (upcoming) netlink interface since now all changes happen under the
RTNL.

As a nice side effect this greatly simplifies error handling in the helper
functions and fixes a number of incorrect error codes like -EINVAL for
device not found.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 22:14:38 -07:00
Bill Nottingham
75202e7689 [NET]: Fix comparisons of unsigned < 0.
Recent gcc versions emit warnings when unsigned variables are
compared < 0 or >= 0.

Signed-off-by: Bill Nottingham <notting@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-03 18:08:47 -07:00
Stephen Hemminger
d2d1acdb6a VLAN: kill_vid is only useful for VLAN filtering devices
The interface for network device VLAN extension was confusing.
The kill_vid function is only really useful for devices that do
hardware filtering. Devices that only do VLAN receiption without
filtering were being forced to provide the hook, and there were
bugs in those devices.

Many drivers had kill_vid routine that called vlan_group_set_device, with
NULL, but that is done already.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-03 11:44:19 -04:00
Pavel Emelianov
7562f876cd [NET]: Rework dev_base via list_head (v3)
Cleanup of dev_base list use, with the aim to simplify making device
list per-namespace. In almost every occasion, use of dev_base variable
and dev->next pointer could be easily replaced by for_each_netdev
loop. A few most complicated places were converted to using
first_netdev()/next_netdev().

Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Acked-by: Kirill Korotaev <dev@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-03 15:13:45 -07:00
Stephen Hemminger
3ff50b7997 [NET]: cleanup extra semicolons
Spring cleaning time...

There seems to be a lot of places in the network code that have
extra bogus semicolons after conditionals.  Most commonly is a
bogus semicolon after: switch() { }

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:29:24 -07:00
David S. Miller
be8bd86321 [VLAN] vlan_dev: Use skb_reset_network_header().
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:26:26 -07:00
Arnaldo Carvalho de Melo
b0e380b1d8 [SK_BUFF]: unions of just one member don't get anything done, kill them
Renaming skb->h to skb->transport_header, skb->nh to skb->network_header and
skb->mac to skb->mac_header, to match the names of the associated helpers
(skb[_[re]set]_{transport,network,mac}_header).

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:26:20 -07:00
YOSHIFUJI Hideaki
b93b7eebd3 [NET] 8021Q: Use htons() where appropriate.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:23:53 -07:00
Jerome Borsboom
279e172a58 [VLAN]: Allow VLAN interface on top of bridge interface
When a VLAN interface is created on top of a bridge interface and 
netfilter is enabled to see the bridged packets, the packets can be 
corrupted when passing through the netfilter code. This is caused by the 
VLAN driver not setting the 'protocol' and 'nh' members of the sk_buff 
structure. In general, this is no problem as the VLAN interface is mostly 
connected to a physical ethernet interface which does not use the 
'protocol' and 'nh' members. For a bridge interface, however, these 
members do matter.

Signed-off-by: Jerome Borsboom <j.borsboom@erasmusmc.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-13 16:12:47 -07:00
Dan Aloni
5c15bdec5c [VLAN]: Avoid a 4-order allocation.
This patch splits the vlan_group struct into a multi-allocated struct. On
x86_64, the size of the original struct is a little more than 32KB, causing
a 4-order allocation, which is prune to problems caused by buddy-system
external fragmentation conditions.

I couldn't just use vmalloc() because vfree() cannot be called in the
softirq context of the RCU callback.

Signed-off-by: Dan Aloni <da-x@monatomic.org>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-02 20:44:51 -08:00
Arjan van de Ven
9a32144e9d [PATCH] mark struct file_operations const 7
Many struct file_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:46 -08:00
YOSHIFUJI Hideaki
122952fc2d [NET] 8021Q: Fix whitespace errors.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10 23:19:11 -08:00
Alexey Dobriyan
d136fe7243 [PATCH] Finish annotations of struct vlan_ethhdr
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-10 16:15:34 -07:00
Stefan Rompf
6c753c3d3b [VLAN]: Fix link state propagation
When the queue of the underlying device is stopped at initialization time
or the device is marked "not present", the state will be propagated to the
vlan device and never change. Based on an analysis by Patrick McHardy.

Signed-off-by: Stefan Rompf <stefan@loplof.de>
ACKed-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-24 13:52:13 -07:00
Panagiotis Issaris
0da974f4f3 [NET]: Conversions from kmalloc+memset to k(z|c)alloc.
Signed-off-by: Panagiotis Issaris <takis@issaris.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21 14:51:30 -07:00
Arjan van de Ven
5dd8d1e9eb [PATCH] lockdep: annotate vlan net device as being a special class
vlan network devices have devices nesting below it, and are a special
"super class" of normal network devices; split their locks off into a
separate class since they always nest.

[deweerdt@free.fr: fix possible null-pointer deref]
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 15:27:10 -07:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Herbert Xu
cbb042f9e1 [NET]: Replace skb_pull/skb_postpull_rcsum with skb_pull_rcsum
We're now starting to have quite a number of places that do skb_pull
followed immediately by an skb_postpull_rcsum.  We can merge these two
operations into one function with skb_pull_rcsum.  This makes sense
since most pull operations on receive skb's need to update the
checksum.

I've decided to make this out-of-line since it is fairly big and the
fast path where hardware checksums are enabled need to call
csum_partial anyway.

Since this is a brand new function we get to add an extra check on the
len argument.  As it is most callers of skb_pull ignore its return
value which essentially means that there is no check on the len
argument.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:43:56 -08:00
Stefan Rompf
ddd7bf9fe4 [VLAN]: translate IF_OPER_DORMANT to netif_dormant_on()
this patch adds support to the VLAN driver to translate IF_OPER_DORMANT of the
underlying device to netif_dormant_on(). Beside clean state forwarding, this
allows running independant userspace supplicants on both the real device and
the stacked VLAN. It depends on my RFC2863 patch.

Signed-off-by: Stefan Rompf <stefan@loplof.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 17:11:41 -08:00
Randy Dunlap
4fc268d24c [PATCH] capable/capability.h (net/)
net: Use <linux/capability.h> where capable() is used.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 18:42:14 -08:00
Kris Katterjohn
d3f4a687f6 [NET]: Change memcmp(,,ETH_ALEN) to compare_ether_addr()
This changes some memcmp(one,two,ETH_ALEN) to compare_ether_addr(one,two).

Signed-off-by: Kris Katterjohn <kjak@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-10 12:54:28 -08:00
Mika Kukkonen
7eb1b3d372 [VLAN]: Add two missing checks to vlan_ioctl_handler()
In vlan_ioctl_handler() the code misses couple checks for
error return values.

Signed-off-by: Mika Kukkonen <mikukkon@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-21 18:39:49 -08:00
Stephen Hemminger
a388442c37 [VLAN]: Fix hardware rx csum errors
Receiving VLAN packets over a device (without VLAN assist) that is
doing hardware checksumming (CHECKSUM_HW), causes errors because the
VLAN code forgets to adjust the hardware checksum.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-14 16:23:16 -08:00
Alexey Dobriyan
3c3f8f25c1 [8021Q]: Add endian annotations.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-19 15:41:28 -07:00
David S. Miller
f2ccd8fa06 [NET]: Kill skb->real_dev
Bonding just wants the device before the skb_bond()
decapsulation occurs, so simply pass that original
device into packet_type->func() as an argument.

It remains to be seen whether we can use this same
exact thing to get rid of skb->input_dev as well.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 15:32:25 -07:00
Tommy Christensen
f4637b55ba [VLAN]: Fix early vlan adding leads to not functional device
OK, I can see what's happening here. eth0 doesn't detect link-up until
after a few seconds, so when the vlan interface is opened immediately
after eth0 has been opened, it inherits the link-down state. Subsequently
the vlan interface is never properly activated and are thus unable to
transmit any packets.

dev->state bits are not supposed to be manipulated directly. Something
similar is probably needed for the netif_device_present() bit, although
I don't know how this is meant to work for a virtual device.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-12 12:13:49 -07:00
Sam Ravnborg
6a2e9b738c [NET]: move config options out to individual protocols
Move the protocol specific config options out to the specific protocols.
With this change net/Kconfig now starts to become readable and serve as a
good basis for further re-structuring.

The menu structure is left almost intact, except that indention is
fixed in most cases. Most visible are the INET changes where several
"depends on INET" are replaced with a single ifdef INET / endif pair.

Several new files were created to accomplish this change - they are
small but serve the purpose that config options are now distributed
out where they belongs.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-11 21:13:56 -07:00
Jesper Juhl
e49332bd12 [PATCH] misc verify_area cleanups
There were still a few comments left refering to verify_area, and two
functions, verify_area_skas & verify_area_tt that just wrap corresponding
access_ok_skas & access_ok_tt functions, just like verify_area does for
access_ok - deprecate those.

There was also a few places that still used verify_area in commented-out
code, fix those up to use access_ok.

After applying this one there should not be anything left but finally
removing verify_area completely, which will happen after a kernel release
or two.

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:08 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00