Commit graph

17 commits

Author SHA1 Message Date
Alex Williamson
3f68b0318b KVM: IOMMU: Disable device assignment without interrupt remapping
IOMMU interrupt remapping support provides a further layer of
isolation for device assignment by preventing arbitrary interrupt
block DMA writes by a malicious guest from reaching the host.  By
default, we should require that the platform provides interrupt
remapping support, with an opt-in mechanism for existing behavior.

Both AMD IOMMU and Intel VT-d2 hardware support interrupt
remapping, however we currently only have software support on
the Intel side.  Users wishing to re-enable device assignment
when interrupt remapping is not supported on the platform can
use the "allow_unsafe_assigned_interrupts=1" module option.

[avi: break long lines]

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-07-24 11:50:42 +03:00
Joerg Roedel
5689cc53fa KVM: Use u64 for frame data types
For 32bit machines where the physical address width is
larger than the virtual address width the frame number types
in KVM may overflow. Fix this by changing them to u64.

[sfr: fix build on 32-bit ppc]

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-02 06:39:44 +03:00
Sheng Yang
95c87e2b44 KVM: Fix IOMMU memslot reference warning
This patch fixes the following warning.

===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
include/linux/kvm_host.h:259 invoked rcu_dereference_check() without
protection!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
no locks held by qemu-system-x86/29679.

stack backtrace:
Pid: 29679, comm: qemu-system-x86 Not tainted 2.6.35-rc3+ #200
Call Trace:
 [<ffffffff810a224e>] lockdep_rcu_dereference+0xa8/0xb1
 [<ffffffffa018a06f>] kvm_iommu_unmap_memslots+0xc9/0xde [kvm]
 [<ffffffffa018a0c4>] kvm_iommu_unmap_guest+0x40/0x4e [kvm]
 [<ffffffffa018f772>] kvm_arch_destroy_vm+0x1a/0x186 [kvm]
 [<ffffffffa01800d0>] kvm_put_kvm+0x110/0x167 [kvm]
 [<ffffffffa0180ecc>] kvm_vcpu_release+0x18/0x1c [kvm]
 [<ffffffff81156f5d>] fput+0x22a/0x3a0
 [<ffffffff81152288>] filp_close+0xb4/0xcd
 [<ffffffff8106599f>] put_files_struct+0x1b7/0x36b
 [<ffffffff81065830>] ? put_files_struct+0x48/0x36b
 [<ffffffff8131ee59>] ? do_raw_spin_unlock+0x118/0x160
 [<ffffffff81065bc0>] exit_files+0x6d/0x75
 [<ffffffff81068348>] do_exit+0x47d/0xc60
 [<ffffffff8177e7b5>] ? _raw_spin_unlock_irq+0x30/0x36
 [<ffffffff81068bfa>] do_group_exit+0xcf/0x134
 [<ffffffff81080790>] get_signal_to_deliver+0x732/0x81d
 [<ffffffff81095996>] ? cpu_clock+0x4e/0x60
 [<ffffffff81002082>] do_notify_resume+0x117/0xc43
 [<ffffffff810a2fa3>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff81080d79>] ? sys_rt_sigtimedwait+0x2b5/0x3bf
 [<ffffffff8177d9f2>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff81003221>] ? sysret_signal+0x5/0x3d
 [<ffffffff8100343b>] int_signal+0x12/0x17

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:47:29 +03:00
Avi Kivity
221d059d15 KVM: Update Red Hat copyrights
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:35:51 +03:00
Jan Kiszka
05b782ab95 KVM: Fix order passed to iommu_unmap
This is obviously a left-over from the the old interface taking the
size. Apparently a mostly harmless issue with the current iommu_unmap
implementation.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-06-09 18:48:38 +03:00
Linus Torvalds
98edb6ca41 Merge branch 'kvm-updates/2.6.35' of git://git.kernel.org/pub/scm/virt/kvm/kvm
* 'kvm-updates/2.6.35' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (269 commits)
  KVM: x86: Add missing locking to arch specific vcpu ioctls
  KVM: PPC: Add missing vcpu_load()/vcpu_put() in vcpu ioctls
  KVM: MMU: Segregate shadow pages with different cr0.wp
  KVM: x86: Check LMA bit before set_efer
  KVM: Don't allow lmsw to clear cr0.pe
  KVM: Add cpuid.txt file
  KVM: x86: Tell the guest we'll warn it about tsc stability
  x86, paravirt: don't compute pvclock adjustments if we trust the tsc
  x86: KVM guest: Try using new kvm clock msrs
  KVM: x86: export paravirtual cpuid flags in KVM_GET_SUPPORTED_CPUID
  KVM: x86: add new KVMCLOCK cpuid feature
  KVM: x86: change msr numbers for kvmclock
  x86, paravirt: Add a global synchronization point for pvclock
  x86, paravirt: Enable pvclock flags in vcpu_time_info structure
  KVM: x86: Inject #GP with the right rip on efer writes
  KVM: SVM: Don't allow nested guest to VMMCALL into host
  KVM: x86: Fix exception reinjection forced to true
  KVM: Fix wallclock version writing race
  KVM: MMU: Don't read pdptrs with mmu spinlock held in mmu_alloc_roots
  KVM: VMX: enable VMXON check with SMX enabled (Intel TXT)
  ...
2010-05-21 17:16:21 -07:00
Lai Jiangshan
90d83dc3d4 KVM: use the correct RCU API for PROVE_RCU=y
The RCU/SRCU API have already changed for proving RCU usage.

I got the following dmesg when PROVE_RCU=y because we used incorrect API.
This patch coverts rcu_deference() to srcu_dereference() or family API.

===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
arch/x86/kvm/mmu.c:3020 invoked rcu_dereference_check() without protection!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
2 locks held by qemu-system-x86/8550:
 #0:  (&kvm->slots_lock){+.+.+.}, at: [<ffffffffa011a6ac>] kvm_set_memory_region+0x29/0x50 [kvm]
 #1:  (&(&kvm->mmu_lock)->rlock){+.+...}, at: [<ffffffffa012262d>] kvm_arch_commit_memory_region+0xa6/0xe2 [kvm]

stack backtrace:
Pid: 8550, comm: qemu-system-x86 Not tainted 2.6.34-rc4-tip-01028-g939eab1 #27
Call Trace:
 [<ffffffff8106c59e>] lockdep_rcu_dereference+0xaa/0xb3
 [<ffffffffa012f6c1>] kvm_mmu_calculate_mmu_pages+0x44/0x7d [kvm]
 [<ffffffffa012263e>] kvm_arch_commit_memory_region+0xb7/0xe2 [kvm]
 [<ffffffffa011a5d7>] __kvm_set_memory_region+0x636/0x6e2 [kvm]
 [<ffffffffa011a6ba>] kvm_set_memory_region+0x37/0x50 [kvm]
 [<ffffffffa015e956>] vmx_set_tss_addr+0x46/0x5a [kvm_intel]
 [<ffffffffa0126592>] kvm_arch_vm_ioctl+0x17a/0xcf8 [kvm]
 [<ffffffff810a8692>] ? unlock_page+0x27/0x2c
 [<ffffffff810bf879>] ? __do_fault+0x3a9/0x3e1
 [<ffffffffa011b12f>] kvm_vm_ioctl+0x364/0x38d [kvm]
 [<ffffffff81060cfa>] ? up_read+0x23/0x3d
 [<ffffffff810f3587>] vfs_ioctl+0x32/0xa6
 [<ffffffff810f3b19>] do_vfs_ioctl+0x495/0x4db
 [<ffffffff810e6b2f>] ? fget_light+0xc2/0x241
 [<ffffffff810e416c>] ? do_sys_open+0x104/0x116
 [<ffffffff81382d6d>] ? retint_swapgs+0xe/0x13
 [<ffffffff810f3ba6>] sys_ioctl+0x47/0x6a
 [<ffffffff810021db>] system_call_fastpath+0x16/0x1b

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17 12:18:01 +03:00
Joerg Roedel
fcd95807fb kvm: Change kvm_iommu_map_pages to map large pages
This patch changes the implementation of of
kvm_iommu_map_pages to map the pages with the host page size
into the io virtual address space.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-By: Avi Kivity <avi@redhat.com>
2010-03-07 18:01:11 +01:00
Zhai, Edwin
ab9f4ecbb6 KVM: enable PCI multiple-segments for pass-through device
Enable optional parameter (default 0) - PCI segment (or domain) besides
BDF, when assigning PCI device to guest.

Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:36:06 -03:00
Marcelo Tosatti
bc6678a33d KVM: introduce kvm->srcu and convert kvm_set_memory_region to SRCU update
Use two steps for memslot deletion: mark the slot invalid (which stops
instantiation of new shadow pages for that slot, but allows destruction),
then instantiate the new empty slot.

Also simplifies kvm_handle_hva locking.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:44 -03:00
Marcelo Tosatti
3ad26d8139 KVM: use gfn_to_pfn_memslot in kvm_iommu_map_pages
So its possible to iommu map a memslot before making it visible to
kvm.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:44 -03:00
Marcelo Tosatti
46a26bf557 KVM: modify memslots layout in struct kvm
Have a pointer to an allocated region inside struct kvm.

[alex: fix ppc book 3s]

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:43 -03:00
Sheng Yang
522c68c441 KVM: Enable snooping control for supported hardware
Memory aliases with different memory type is a problem for guest. For the guest
without assigned device, the memory type of guest memory would always been the
same as host(WB); but for the assigned device, some part of memory may be used
as DMA and then set to uncacheable memory type(UC/WC), which would be a conflict of
host memory type then be a potential issue.

Snooping control can guarantee the cache correctness of memory go through the
DMA engine of VT-d.

[avi: fix build on ia64]

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:50 +03:00
Mark McLoughlin
682edb4c01 KVM: Fix assigned devices circular locking dependency
kvm->slots_lock is outer to kvm->lock, so take slots_lock
in kvm_vm_ioctl_assign_device() before taking kvm->lock,
rather than taking it in kvm_iommu_map_memslots().

Cc: stable@kernel.org
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-02-15 02:47:39 +02:00
Joerg Roedel
7398ca79d2 kvm/iommu: fix compile warning
This fixes a compile warning about a variable thats maybe used
uninitialized in the function.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03 16:37:53 +01:00
Joerg Roedel
19de40a847 KVM: change KVM to use IOMMU API
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03 14:11:07 +01:00
Joerg Roedel
c4fa386428 KVM: rename vtd.c to iommu.c
Impact: file renamed

The code in the vtd.c file can be reused for other IOMMUs as well. So
rename it to make it clear that it handle more than VT-d.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2009-01-03 14:10:09 +01:00
Renamed from virt/kvm/vtd.c (Browse further)