This allows us to turn off disk stat accounting completely, for the cases
where the 0.5-1% reduction in system time is important.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
The commit 818827669d (block: make
blk_rq_map_user take a NULL user-space buffer) extended
blk_rq_map_user to accept a NULL user-space buffer with a READ
command. It was necessary to convert sg to use the block layer mapping
API.
This patch extends blk_rq_map_user again for a WRITE command. It is
necessary to convert st and osst drivers to use the block layer
apping API.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
This fixes bio_copy_user_iov to properly handle the partial mappings
with struct rq_map_data (which only sg uses for now but st and osst
will shortly). It adds the offset member to struct rq_map_data and
changes blk_rq_map_user to update it so that bio_copy_user_iov can add
an appropriate page frame via bio_add_pc_page().
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Empty barrier required special handling in __elv_next_request() to
complete it without letting the low level driver see it.
With previous changes, barrier code is now flexible enough to skip the
BAR step using the same barrier sequence selection mechanism. Drop
the special handling and mask off q->ordered from start_ordered().
Remove blk_empty_barrier() test which now has no user.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Barrier completion had the following assumptions.
* start_ordered() couldn't finish the whole sequence properly. If all
actions are to be skipped, q->ordseq is set correctly but the actual
completion was never triggered thus hanging the barrier request.
* Drain completion in elv_complete_request() assumed that there's
always at least one request in the queue when drain completes.
Both assumptions are true but these assumptions need to be removed to
improve empty barrier implementation. This patch makes the following
changes.
* Make start_ordered() use blk_ordered_complete_seq() to mark skipped
steps complete and notify __elv_next_request() that it should fetch
the next request if the whole barrier has completed inside
start_ordered().
* Make drain completion path in elv_complete_request() check whether
the queue is empty. Empty queue also indicates drain completion.
* While at it, convert 0/1 return from blk_do_ordered() to false/true.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
In all barrier sequences, the barrier write itself was always assumed
to be issued and thus didn't have corresponding control flag. This
patch adds QUEUE_ORDERED_DO_BAR and unify action mask handling in
start_ordered() such that any barrier action can be skipped.
This patch doesn't introduce any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Separate out ordering type (drain,) and action masks (preflush,
postflush, fua) from visible ordering mode selectors
(QUEUE_ORDERED_*). Ordering types are now named QUEUE_ORDERED_BY_*
while action masks are named QUEUE_ORDERED_DO_*.
This change is necessary to add QUEUE_ORDERED_DO_BAR and make it
optional to improve empty barrier implementation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
After many improvements on kblockd_flush_work, it is now identical to
cancel_work_sync, so a direct call to cancel_work_sync is suggested.
The only difference is that cancel_work_sync is a GPL symbol,
so no non-GPL modules anymore.
Signed-off-by: Cheng Renquan <crquan@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
As is the case with SSD devices, we do not want to idle in AS/CFQ when
the block device is a paravirt front-end driver. This patch adds a flag
(QUEUE_FLAG_VIRT) which should be used by front-end drivers such as
virtio_blk and xen-blkfront to indicate a paravirtualized device.
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
There's no point in having too short SG_IO timeouts, since if the
command does end up timing out, we'll end up through the reset sequence
that is several seconds long in order to abort the command that timed
out.
As a result, shorter timeouts than a few seconds simply do not make
sense, as the recovery would be longer than the timeout itself.
Add a BLK_MIN_SG_TIMEOUT to match the existign BLK_DEFAULT_SG_TIMEOUT.
Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix setting of max_segment_size and seg_boundary mask for stacked md/dm
devices.
When stacking devices (LVM over MD over SCSI) some of the request queue
parameters are not set up correctly in some cases by default, namely
max_segment_size and and seg_boundary mask.
If you create MD device over SCSI, these attributes are zeroed.
Problem become when there is over this mapping next device-mapper mapping
- queue attributes are set in DM this way:
request_queue max_segment_size seg_boundary_mask
SCSI 65536 0xffffffff
MD RAID1 0 0
LVM 65536 -1 (64bit)
Unfortunately bio_add_page (resp. bio_phys_segments) calculates number of
physical segments according to these parameters.
During the generic_make_request() is segment cout recalculated and can
increase bio->bi_phys_segments count over the allowed limit. (After
bio_clone() in stack operation.)
Thi is specially problem in CCISS driver, where it produce OOPS here
BUG_ON(creq->nr_phys_segments > MAXSGENTRIES);
(MAXSEGENTRIES is 31 by default.)
Sometimes even this command is enough to cause oops:
dd iflag=direct if=/dev/<vg>/<lv> of=/dev/null bs=128000 count=10
This command generates bios with 250 sectors, allocated in 32 4k-pages
(last page uses only 1024 bytes).
For LVM layer, it allocates bio with 31 segments (still OK for CCISS),
unfortunatelly on lower layer it is recalculated to 32 segments and this
violates CCISS restriction and triggers BUG_ON().
The patch tries to fix it by:
* initializing attributes above in queue request constructor
blk_queue_make_request()
* make sure that blk_queue_stack_limits() inherits setting
(DM uses its own function to set the limits because it
blk_queue_stack_limits() was introduced later. It should probably switch
to use generic stack limit function too.)
* sets the default seg_boundary value in one place (blkdev.h)
* use this mask as default in DM (instead of -1, which differs in 64bit)
Bugs related to this:
https://bugzilla.redhat.com/show_bug.cgi?id=471639http://bugzilla.kernel.org/show_bug.cgi?id=8672
Signed-off-by: Milan Broz <mbroz@redhat.com>
Reviewed-by: Alasdair G Kergon <agk@redhat.com>
Cc: Neil Brown <neilb@suse.de>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Mike Miller <mike.miller@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
blkdev_dequeue_request() and elv_dequeue_request() are equivalent and
both start the timeout timer. Barrier code dequeues the original
barrier request but doesn't passes the request itself to lower level
driver, only broken down proxy requests; however, as the original
barrier code goes through the same dequeue path and timeout timer is
started on it. If barrier sequence takes long enough, this timer
expires but the low level driver has no idea about this request and
oops follows.
Timeout timer shouldn't have been started on the original barrier
request as it never goes through actual IO. This patch unexports
elv_dequeue_request(), which has no external user anyway, and makes it
operate on elevator proper w/o adding the timer and make
blkdev_dequeue_request() call elv_dequeue_request() and add timer.
Internal users which don't pass the request to driver - barrier code
and end_that_request_last() - are converted to use
elv_dequeue_request().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Mike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
To keep the size of changesets sane we split the switch by drivers;
to keep the damn thing bisectable we do the following:
1) rename the affected methods, add ones with correct
prototypes, make (few) callers handle both. That's this changeset.
2) for each driver convert to new methods. *ALL* drivers
are converted in this series.
3) kill the old (renamed) methods.
Note that it _is_ a flagday; all in-tree drivers are converted and by the
end of this series no trace of old methods remain. The only reason why
we do that this way is to keep the damn thing bisectable and allow per-driver
debugging if anything goes wrong.
New methods:
open(bdev, mode)
release(disk, mode)
ioctl(bdev, mode, cmd, arg) /* Called without BKL */
compat_ioctl(bdev, mode, cmd, arg)
locked_ioctl(bdev, mode, cmd, arg) /* Called with BKL, legacy */
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Analog of blkdev_driver_ioctl() with sane arguments. For
now uses fake struct file, by the end of the series it won't
and blkdev_driver_ioctl() will become a wrapper around it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
block: remove __generic_unplug_device() from exports
block: move q->unplug_work initialization
blktrace: pass zfcp driver data
blktrace: add support for driver data
block: fix current kernel-doc warnings
block: only call ->request_fn when the queue is not stopped
block: simplify string handling in elv_iosched_store()
block: fix kernel-doc for blk_alloc_devt()
block: fix nr_phys_segments miscalculation bug
block: add partition attribute for partition number
block: add BIG FAT WARNING to CONFIG_DEBUG_BLOCK_EXT_DEVT
softirq: Add support for triggering softirq work on softirqs.
Multipath is best at handling transport errors. If it gets a device
error then there is not much the multipath layer can do. It will just
access the same device but from a different path.
This patch breaks up failfast into device, transport and driver errors.
The multipath layers (md and dm mutlipath) only ask the lower levels to
fast fail transport errors. The user of failfast, read ahead, will ask
to fast fail on all errors.
Note that blk_noretry_request will return true if any failfast bit
is set. This allows drivers that do not support the multipath failfast
bits to continue to fail on any failfast error like before. Drivers
like scsi that are able to fail fast specific errors can check
for the specific fail fast type. In the next patch I will convert
scsi.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
This is a wrapper for accessing a gendisk's integrity bits. It allows
the integrity support in MD to be compiled with BLK_DEV_INTEGRITY off.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
The DM and MD integrity support now depends on being able to use
gendisks instead of block_devices when comparing integrity profiles.
Change function parameters accordingly.
Also update comparison logic so that two NULL profiles are a valid
configuration.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This patch removes end_queued_request() and end_dequeued_request(),
which are no longer used.
As a results, users of __end_request() became only end_request().
So the actual code in __end_request() is moved to end_request()
and __end_request() is removed.
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This patch adds an new interface, blk_lld_busy(), to check lld's
busy state from the block layer.
blk_lld_busy() calls down into low-level drivers for the checking
if the drivers set q->lld_busy_fn() using blk_queue_lld_busy().
This resolves a performance problem on request stacking devices below.
Some drivers like scsi mid layer stop dispatching request when
they detect busy state on its low-level device like host/target/device.
It allows other requests to stay in the I/O scheduler's queue
for a chance of merging.
Request stacking drivers like request-based dm should follow
the same logic.
However, there is no generic interface for the stacked device
to check if the underlying device(s) are busy.
If the request stacking driver dispatches and submits requests to
the busy underlying device, the requests will stay in
the underlying device's queue without a chance of merging.
This causes performance problem on burst I/O load.
With this patch, busy state of the underlying device is exported
via q->lld_busy_fn(). So the request stacking driver can check it
and stop dispatching requests if busy.
The underlying device driver must return the busy state appropriately:
1: when the device driver can't process requests immediately.
0: when the device driver can process requests immediately,
including abnormal situations where the device driver needs
to kill all requests.
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
We don't want to idle in AS/CFQ if the device doesn't have a seek
penalty. So add a QUEUE_FLAG_NONROT to indicate a non-rotational
device, low level drivers should set this flag upon discovery of
an SSD or similar device type.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This patch adds a queue flag to indicate the block device can be
used for request stacking.
Request stacking drivers need to stack their devices on top of
only devices of which q->request_fn is functional.
Since bio stacking drivers (e.g. md, loop) basically initialize
their queue using blk_alloc_queue() and don't set q->request_fn,
the check of (q->request_fn == NULL) looks enough for that purpose.
However, dm will become both types of stacking driver (bio-based and
request-based). And dm will always set q->request_fn even if the dm
device is bio-based of which q->request_fn is not functional actually.
So we need something else to distinguish the type of the device.
Adding a queue flag is a solution for that.
The reason why dm always sets q->request_fn is to keep
the compatibility of dm user-space tools.
Currently, all dm user-space tools are using bio-based dm without
specifying the type of the dm device they use.
To use request-based dm without changing such tools, the kernel
must decide the type of the dm device automatically.
The automatic type decision can't be done at the device creation time
and needs to be deferred until such tools load a mapping table,
since the actual type is decided by dm target type included in
the mapping table.
So a dm device has to be initialized using blk_init_queue()
so that we can load either type of table.
Then, all queue stuffs are set (e.g. q->request_fn) and we have
no element to distinguish that it is bio-based or request-based,
even after a table is loaded and the type of the device is decided.
By the way, some stuffs of the queue (e.g. request_list, elevator)
are needless when the dm device is used as bio-based.
But the memory size is not so large (about 20[KB] per queue on ia64),
so I hope the memory loss can be acceptable for bio-based dm users.
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This patch adds blk_insert_cloned_request(), a generic request
submission interface for request stacking drivers.
Request-based dm will use it to submit their clones to underlying
devices.
blk_rq_check_limits() is also added because it is possible that
the lower queue has stronger limitations than the upper queue
if multiple drivers are stacking at request-level.
Not only for blk_insert_cloned_request()'s internal use, the function
will be used by request-based dm when the queue limitation is
modified (e.g. by replacing dm's table).
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This patch adds blk_update_request(), which updates struct request
with completing its data part, but doesn't complete the struct
request itself.
Though it looks like end_that_request_first() of older kernels,
blk_update_request() should be used only by request stacking drivers.
Request-based dm will use it in bio->bi_end_io callback to update
the original request when a data part of a cloned request completes.
Followings are additional background information of why request-based
dm needs this interface.
- Request stacking drivers can't use blk_end_request() directly from
the lower driver's completion context (bio->bi_end_io or rq->end_io),
because some device drivers (e.g. ide) may try to complete
their request with queue lock held, and it may cause deadlock.
See below for detailed description of possible deadlock:
<http://marc.info/?l=linux-kernel&m=120311479108569&w=2>
- To solve that, request-based dm offloads the completion of
cloned struct request to softirq context (i.e. using
blk_complete_request() from rq->end_io).
- Though it is possible to use the same solution from bio->bi_end_io,
it will delay the notification of bio completion to the original
submitter. Also, it will cause inefficient partial completion,
because the lower driver can't perform the cloned request anymore
and request-based dm needs to requeue and redispatch it to
the lower driver again later. That's not good.
- So request-based dm needs blk_update_request() to perform the bio
completion in the lower driver's completion context, which is more
efficient.
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Don't put functions that are only used in fs/bio-integrity.c in
blkdev.h, it's much cleaner to just keep it in there. Also kill
completely unused bdev_get_tag_size()
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Only works for the generic request timer handling. Allows one to
sporadically ignore request completions, thus exercising the timeout
handling.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Two mods to blkdev_issue_discard(), thinking ahead to its use on swap:
1. Add gfp_mask argument, so swap allocation can use it where GFP_KERNEL
might deadlock but GFP_NOIO is safe.
2. Enlarge nr_sects argument from unsigned to sector_t: unsigned long is
enough to cover a whole swap area, but sector_t suits any partition.
Change sb_issue_discard()'s nr_blocks to sector_t too; but no need seen
for a gfp_mask there, just pass GFP_KERNEL down to blkdev_issue_discard().
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Right now SCSI and others do their own command timeout handling.
Move those bits to the block layer.
Instead of having a timer per command, we try to be a bit more clever
and simply have one per-queue. This avoids the overhead of having to
tear down and setup a timer for each command, so it will result in a lot
less timer fiddling.
Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This adds blk_rq_aligned helper function to see if alignment and
padding requirement is satisfied for DMA transfer. This also converts
blk_rq_map_kern and __blk_rq_map_user to use the helper function.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This patch introduces struct rq_map_data to enable bio_copy_use_iov()
use reserved pages.
Currently, bio_copy_user_iov allocates bounce pages but
drivers/scsi/sg.c wants to allocate pages by itself and use
them. struct rq_map_data can be used to pass allocated pages to
bio_copy_user_iov.
The current users of bio_copy_user_iov simply passes NULL (they don't
want to use pre-allocated pages).
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Douglas Gilbert <dougg@torque.net>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Currently, blk_rq_map_user and blk_rq_map_user_iov always do
GFP_KERNEL allocation.
This adds gfp_mask argument to blk_rq_map_user and blk_rq_map_user_iov
so sg can use it (sg always does GFP_ATOMIC allocation).
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Douglas Gilbert <dougg@torque.net>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Somewhat incomplete, as we do allow merges of requests and bios
that have different completion CPUs given. This is done on the
assumption that a larger IO is still more beneficial than CPU
locality.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This patch adds support for controlling the IO completion CPU of
either all requests on a queue, or on a per-request basis. We export
a sysfs variable (rq_affinity) which, if set, migrates completions
of requests to the CPU that originally submitted it. A bio helper
(bio_set_completion_cpu()) is also added, so that queuers can ask
for completion on that specific CPU.
In testing, this has been show to cut the system time by as much
as 20-40% on synthetic workloads where CPU affinity is desired.
This requires a little help from the architecture, so it'll only
work as designed for archs that are using the new generic smp
helper infrastructure.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Remove hw_segments field from struct bio and struct request. Without virtual
merge accounting they have no purpose.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
struct request has an ioprio member but it is never updated because
currently bios do not hold io context information. The implication of
this is that virtio_blk ends up passing useless information to the
backend driver.
That said, some IO schedulers such as CFQ do store io context
information in struct request, but use private members for that, which
means that that information cannot be directly accessed in a IO
scheduler-independent way.
This patch adds a function to obtain the ioprio of a request. We should
avoid accessing ioprio directly and use this function instead, so that
its users do not have to care about future changes in block layer
structures or what the currently active IO controller is.
This patch does not introduce any functional changes but paves the way
for future clean-ups and enhancements.
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
It was only used by ps3disk, and it should probably have been
REQ_TYPE_LINUX_BLOCK + REQ_LB_OP_FLUSH.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
But blkdev_issue_discard() still emits requests which are interpreted as
soft barriers, because naïve callers might otherwise issue subsequent
writes to those same sectors, which might cross on the queue (if they're
reallocated quickly enough).
Callers still _can_ issue non-barrier discard requests, but they have to
take care of queue ordering for themselves.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Some block devices benefit from a hint that they can forget the contents
of certain sectors. Add basic support for this to the block core, along
with a 'blkdev_issue_discard()' helper function which issues such
requests.
The caller doesn't get to provide an end_io functio, since
blkdev_issue_discard() will automatically split the request up into
multiple bios if appropriate. Neither does the function wait for
completion -- it's expected that callers won't care about when, or even
_if_, the request completes. It's only a hint to the device anyway. By
definition, the file system doesn't _care_ about these sectors any more.
[With feedback from OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> and
Jens Axboe <jens.axboe@oracle.com]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
