kpriv/linux-hardened
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
linux-hardened/net/smc/smc_clc.h
Karsten Graul 72b7f6c487 net/smc: unique reason code for exceeded max dmb count 
When the maximum dmb buffer limit for an ism device is reached no more
dmb buffers can be registered. When this happens the reason code is set
to SMC_CLC_DECL_MEM indicating out-of-memory. This is the same reason
code that is used when no memory could be allocated for the new dmb
buffer.
This is confusing for users when they see this error but there is more
memory available. To solve this set a separate new reason code when the
maximum dmb limit exceeded.

Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27 10:30:01 -07:00

205 lines
7.4 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Shared Memory Communications over RDMA (SMC-R) and RoCE
*
* CLC (connection layer control) handshake over initial TCP socket to
* prepare for RDMA traffic
*
* Copyright IBM Corp. 2016
*
* Author(s): Ursula Braun <ubraun@linux.vnet.ibm.com>
*/
#ifndef _SMC_CLC_H
#define _SMC_CLC_H
#include <rdma/ib_verbs.h>
#include "smc.h"
#define SMC_CLC_PROPOSAL 0x01
#define SMC_CLC_ACCEPT 0x02
#define SMC_CLC_CONFIRM 0x03
#define SMC_CLC_DECLINE 0x04
#define SMC_CLC_V1 0x1 /* SMC version */
#define SMC_TYPE_R 0 /* SMC-R only */
#define SMC_TYPE_D 1 /* SMC-D only */
#define SMC_TYPE_N 2 /* neither SMC-R nor SMC-D */
#define SMC_TYPE_B 3 /* SMC-R and SMC-D */
#define CLC_WAIT_TIME (6 * HZ) /* max. wait time on clcsock */
#define CLC_WAIT_TIME_SHORT HZ /* short wait time on clcsock */
#define SMC_CLC_DECL_MEM 0x01010000 /* insufficient memory resources */
#define SMC_CLC_DECL_TIMEOUT_CL 0x02010000 /* timeout w4 QP confirm link */
#define SMC_CLC_DECL_TIMEOUT_AL 0x02020000 /* timeout w4 QP add link */
#define SMC_CLC_DECL_CNFERR 0x03000000 /* configuration error */
#define SMC_CLC_DECL_PEERNOSMC 0x03010000 /* peer did not indicate SMC */
#define SMC_CLC_DECL_IPSEC 0x03020000 /* IPsec usage */
#define SMC_CLC_DECL_NOSMCDEV 0x03030000 /* no SMC device found (R or D) */
#define SMC_CLC_DECL_NOSMCDDEV 0x03030001 /* no SMC-D device found */
#define SMC_CLC_DECL_NOSMCRDEV 0x03030002 /* no SMC-R device found */
#define SMC_CLC_DECL_SMCDNOTALK 0x03030003 /* SMC-D dev can't talk to peer */
#define SMC_CLC_DECL_MODEUNSUPP 0x03040000 /* smc modes do not match (R or D)*/
#define SMC_CLC_DECL_RMBE_EC 0x03050000 /* peer has eyecatcher in RMBE */
#define SMC_CLC_DECL_OPTUNSUPP 0x03060000 /* fastopen sockopt not supported */
#define SMC_CLC_DECL_DIFFPREFIX 0x03070000 /* IP prefix / subnet mismatch */
#define SMC_CLC_DECL_GETVLANERR 0x03080000 /* err to get vlan id of ip device*/
#define SMC_CLC_DECL_ISMVLANERR 0x03090000 /* err to reg vlan id on ism dev */
#define SMC_CLC_DECL_NOACTLINK 0x030a0000 /* no active smc-r link in lgr */
#define SMC_CLC_DECL_NOSRVLINK 0x030b0000 /* SMC-R link from srv not found */
#define SMC_CLC_DECL_VERSMISMAT 0x030c0000 /* SMC version mismatch */
#define SMC_CLC_DECL_MAX_DMB 0x030d0000 /* SMC-D DMB limit exceeded */
#define SMC_CLC_DECL_SYNCERR 0x04000000 /* synchronization error */
#define SMC_CLC_DECL_PEERDECL 0x05000000 /* peer declined during handshake */
#define SMC_CLC_DECL_INTERR 0x09990000 /* internal error */
#define SMC_CLC_DECL_ERR_RTOK 0x09990001 /* rtoken handling failed */
#define SMC_CLC_DECL_ERR_RDYLNK 0x09990002 /* ib ready link failed */
#define SMC_CLC_DECL_ERR_REGRMB 0x09990003 /* reg rmb failed */
struct smc_clc_msg_hdr { /* header1 of clc messages */
u8 eyecatcher[4]; /* eye catcher */
u8 type; /* proposal / accept / confirm / decline */
__be16 length;
#if defined(__BIG_ENDIAN_BITFIELD)
u8 version : 4,
flag : 1,
rsvd : 1,
path : 2;
#elif defined(__LITTLE_ENDIAN_BITFIELD)
u8 path : 2,
rsvd : 1,
flag : 1,
version : 4;
#endif
} __packed; /* format defined in RFC7609 */
struct smc_clc_msg_trail { /* trailer of clc messages */
u8 eyecatcher[4];
};
struct smc_clc_msg_local { /* header2 of clc messages */
u8 id_for_peer[SMC_SYSTEMID_LEN]; /* unique system id */
u8 gid[16]; /* gid of ib_device port */
u8 mac[6]; /* mac of ib_device port */
};
#define SMC_CLC_MAX_V6_PREFIX 8
/* Struct would be 4 byte aligned, but it is used in an array that is sent
* to peers and must conform to RFC7609, hence we need to use packed here.
*/
struct smc_clc_ipv6_prefix {
struct in6_addr prefix;
u8 prefix_len;
} __packed; /* format defined in RFC7609 */
struct smc_clc_msg_proposal_prefix { /* prefix part of clc proposal message*/
__be32 outgoing_subnet; /* subnet mask */
u8 prefix_len; /* number of significant bits in mask */
u8 reserved[2];
u8 ipv6_prefixes_cnt; /* number of IPv6 prefixes in prefix array */
} __aligned(4);
struct smc_clc_msg_smcd { /* SMC-D GID information */
u64 gid; /* ISM GID of requestor */
u8 res[32];
};
struct smc_clc_msg_proposal { /* clc proposal message sent by Linux */
struct smc_clc_msg_hdr hdr;
struct smc_clc_msg_local lcl;
__be16 iparea_offset; /* offset to IP address information area */
} __aligned(4);
#define SMC_CLC_PROPOSAL_MAX_OFFSET 0x28
#define SMC_CLC_PROPOSAL_MAX_PREFIX (SMC_CLC_MAX_V6_PREFIX * \
sizeof(struct smc_clc_ipv6_prefix))
#define SMC_CLC_MAX_LEN (sizeof(struct smc_clc_msg_proposal) + \
SMC_CLC_PROPOSAL_MAX_OFFSET + \
sizeof(struct smc_clc_msg_proposal_prefix) + \
SMC_CLC_PROPOSAL_MAX_PREFIX + \
sizeof(struct smc_clc_msg_trail))
struct smc_clc_msg_accept_confirm { /* clc accept / confirm message */
struct smc_clc_msg_hdr hdr;
union {
struct { /* SMC-R */
struct smc_clc_msg_local lcl;
u8 qpn[3]; /* QP number */
__be32 rmb_rkey; /* RMB rkey */
u8 rmbe_idx; /* Index of RMBE in RMB */
__be32 rmbe_alert_token;/* unique connection id */
#if defined(__BIG_ENDIAN_BITFIELD)
u8 rmbe_size : 4, /* buf size (compressed) */
qp_mtu : 4; /* QP mtu */
#elif defined(__LITTLE_ENDIAN_BITFIELD)
u8 qp_mtu : 4,
rmbe_size : 4;
#endif
u8 reserved;
__be64 rmb_dma_addr; /* RMB virtual address */
u8 reserved2;
u8 psn[3]; /* packet sequence number */
struct smc_clc_msg_trail smcr_trl;
/* eye catcher "SMCR" EBCDIC */
} __packed;
struct { /* SMC-D */
u64 gid; /* Sender GID */
u64 token; /* DMB token */
u8 dmbe_idx; /* DMBE index */
#if defined(__BIG_ENDIAN_BITFIELD)
u8 dmbe_size : 4, /* buf size (compressed) */
reserved3 : 4;
#elif defined(__LITTLE_ENDIAN_BITFIELD)
u8 reserved3 : 4,
dmbe_size : 4;
#endif
u16 reserved4;
u32 linkid; /* Link identifier */
u32 reserved5[3];
struct smc_clc_msg_trail smcd_trl;
/* eye catcher "SMCD" EBCDIC */
} __packed;
};
} __packed; /* format defined in RFC7609 */
struct smc_clc_msg_decline { /* clc decline message */
struct smc_clc_msg_hdr hdr;
u8 id_for_peer[SMC_SYSTEMID_LEN]; /* sender peer_id */
__be32 peer_diagnosis; /* diagnosis information */
u8 reserved2[4];
struct smc_clc_msg_trail trl; /* eye catcher "SMCR" EBCDIC */
} __aligned(4);
/* determine start of the prefix area within the proposal message */
static inline struct smc_clc_msg_proposal_prefix *
smc_clc_proposal_get_prefix(struct smc_clc_msg_proposal *pclc)
{
return (struct smc_clc_msg_proposal_prefix *)
((u8 *)pclc + sizeof(*pclc) + ntohs(pclc->iparea_offset));
}
/* get SMC-D info from proposal message */
static inline struct smc_clc_msg_smcd *
smc_get_clc_msg_smcd(struct smc_clc_msg_proposal *prop)
{
if (ntohs(prop->iparea_offset) != sizeof(struct smc_clc_msg_smcd))
return NULL;
return (struct smc_clc_msg_smcd *)(prop + 1);
}
struct smcd_dev;
struct smc_init_info;
int smc_clc_prfx_match(struct socket *clcsock,
struct smc_clc_msg_proposal_prefix *prop);
int smc_clc_wait_msg(struct smc_sock *smc, void *buf, int buflen,
u8 expected_type, unsigned long timeout);
int smc_clc_send_decline(struct smc_sock *smc, u32 peer_diag_info);
int smc_clc_send_proposal(struct smc_sock *smc, int smc_type,
struct smc_init_info *ini);
int smc_clc_send_confirm(struct smc_sock *smc);
int smc_clc_send_accept(struct smc_sock *smc, int srv_first_contact);
#endif
Reference in a new issue View git blame Copy permalink