kpriv/linux-hardened
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
linux-hardened/tools/perf/Makefile
Ingo Molnar 1c13f3c904 perf: Add 'perf bench numa mem' NUMA performance measurement suite 
Add a suite of NUMA performance benchmarks.

The goal was simulate the behavior and access patterns of real NUMA
workloads, via a wide range of parameters, so this tool goes well
beyond simple bzero() measurements that most NUMA micro-benchmarks use:

 - It processes the data and creates a chain of data dependencies,
   like a real workload would. Neither the compiler, nor the
   kernel (via KSM and other optimizations) nor the CPU can
   eliminate parts of the workload.

 - It randomizes the initial state and also randomizes the target
   addresses of the processing - it's not a simple forward scan
   of addresses.

 - It provides flexible options to set process, thread and memory
   relationship information: -G sets "global" memory shared between
   all test processes, -P sets "process" memory shared by all
   threads of a process and -T sets "thread" private memory.

 - There's a NUMA convergence monitoring and convergence latency
   measurement option via -c and -m.

 - Micro-sleeps and synchronization can be injected to provoke lock
   contention and scheduling, via the -u and -S options. This simulates
   IO and contention.

 - The -x option instructs the workload to 'perturb' itself artificially
   every N seconds, by moving to the first and last CPU of the system
   periodically. This way the stability of convergence equilibrium and
   the number of steps taken for the scheduler to reach equilibrium again
   can be measured.

 - The amount of work can be specified via the -l loop count, and/or
   via a -s seconds-timeout value.

 - CPU and node memory binding options, to test hard binding scenarios.
   THP can be turned on and off via madvise() calls.

 - Live reporting of convergence progress in an 'at glance' output format.
   Printing of convergence and deconvergence events.

The 'perf bench numa mem -a' option will start an array of about 30
individual tests that will each output such measurements:

 # Running  5x5-bw-thread, "perf bench numa mem -p 5 -t 5 -P 512 -s 20 -zZ0q --thp  1"
  5x5-bw-thread,                         20.276, secs,           runtime-max/thread
  5x5-bw-thread,                         20.004, secs,           runtime-min/thread
  5x5-bw-thread,                         20.155, secs,           runtime-avg/thread
  5x5-bw-thread,                          0.671, %,              spread-runtime/thread
  5x5-bw-thread,                         21.153, GB,             data/thread
  5x5-bw-thread,                        528.818, GB,             data-total
  5x5-bw-thread,                          0.959, nsecs,          runtime/byte/thread
  5x5-bw-thread,                          1.043, GB/sec,         thread-speed
  5x5-bw-thread,                         26.081, GB/sec,         total-speed

See the help text and the code for more details.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-01-30 10:35:36 -03:00

1155 lines
38 KiB
Makefile
Raw Blame History

include ../scripts/Makefile.include
# The default target of this Makefile is...
all:
include config/utilities.mak
# Define V to have a more verbose compile.
#
# Define O to save output files in a separate directory.
#
# Define ARCH as name of target architecture if you want cross-builds.
#
# Define CROSS_COMPILE as prefix name of compiler if you want cross-builds.
#
# Define NO_LIBPERL to disable perl script extension.
#
# Define NO_LIBPYTHON to disable python script extension.
#
# Define PYTHON to point to the python binary if the default
# `python' is not correct; for example: PYTHON=python2
#
# Define PYTHON_CONFIG to point to the python-config binary if
# the default `$(PYTHON)-config' is not correct.
#
# Define ASCIIDOC8 if you want to format documentation with AsciiDoc 8
#
# Define DOCBOOK_XSL_172 if you want to format man pages with DocBook XSL v1.72.
#
# Define LDFLAGS=-static to build a static binary.
#
# Define EXTRA_CFLAGS=-m64 or EXTRA_CFLAGS=-m32 as appropriate for cross-builds.
#
# Define NO_DWARF if you do not want debug-info analysis feature at all.
#
# Define WERROR=0 to disable treating any warnings as errors.
#
# Define NO_NEWT if you do not want TUI support.
#
# Define NO_GTK2 if you do not want GTK+ GUI support.
#
# Define NO_DEMANGLE if you do not want C++ symbol demangling.
#
# Define NO_LIBELF if you do not want libelf dependency (e.g. cross-builds)
#
# Define NO_LIBUNWIND if you do not want libunwind dependency for dwarf
# backtrace post unwind.
#
# Define NO_BACKTRACE if you do not want stack backtrace debug feature
$(OUTPUT)PERF-VERSION-FILE: .FORCE-PERF-VERSION-FILE
@$(SHELL_PATH) util/PERF-VERSION-GEN $(OUTPUT)
uname_M := $(shell uname -m 2>/dev/null || echo not)
ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
-e s/arm.*/arm/ -e s/sa110/arm/ \
-e s/s390x/s390/ -e s/parisc64/parisc/ \
-e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
-e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ )
NO_PERF_REGS := 1
CC = $(CROSS_COMPILE)gcc
AR = $(CROSS_COMPILE)ar
# Additional ARCH settings for x86
ifeq ($(ARCH),i386)
override ARCH := x86
NO_PERF_REGS := 0
LIBUNWIND_LIBS = -lunwind -lunwind-x86
endif
ifeq ($(ARCH),x86_64)
override ARCH := x86
IS_X86_64 := 0
ifeq (, $(findstring m32,$(EXTRA_CFLAGS)))
IS_X86_64 := $(shell echo __x86_64__ | ${CC} -E -x c - | tail -n 1)
endif
ifeq (${IS_X86_64}, 1)
RAW_ARCH := x86_64
ARCH_CFLAGS := -DARCH_X86_64
ARCH_INCLUDE = ../../arch/x86/lib/memcpy_64.S ../../arch/x86/lib/memset_64.S
endif
NO_PERF_REGS := 0
LIBUNWIND_LIBS = -lunwind -lunwind-x86_64
endif
# Treat warnings as errors unless directed not to
ifneq ($(WERROR),0)
CFLAGS_WERROR := -Werror
endif
ifeq ("$(origin DEBUG)", "command line")
PERF_DEBUG = $(DEBUG)
endif
ifndef PERF_DEBUG
CFLAGS_OPTIMIZE = -O6 -D_FORTIFY_SOURCE=2
endif
ifdef PARSER_DEBUG
PARSER_DEBUG_BISON := -t
PARSER_DEBUG_FLEX := -d
PARSER_DEBUG_CFLAGS := -DPARSER_DEBUG
endif
CFLAGS = -fno-omit-frame-pointer -ggdb3 -funwind-tables -Wall -Wextra -std=gnu99 $(CFLAGS_WERROR) $(CFLAGS_OPTIMIZE) $(EXTRA_WARNINGS) $(EXTRA_CFLAGS) $(PARSER_DEBUG_CFLAGS)
EXTLIBS = -lpthread -lrt -lelf -lm -lnuma
ALL_CFLAGS = $(CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE
ALL_LDFLAGS = $(LDFLAGS)
STRIP ?= strip
# Among the variables below, these:
# perfexecdir
# template_dir
# mandir
# infodir
# htmldir
# ETC_PERFCONFIG (but not sysconfdir)
# can be specified as a relative path some/where/else;
# this is interpreted as relative to $(prefix) and "perf" at
# runtime figures out where they are based on the path to the executable.
# This can help installing the suite in a relocatable way.
# Make the path relative to DESTDIR, not to prefix
ifndef DESTDIR
prefix = $(HOME)
endif
bindir_relative = bin
bindir = $(prefix)/$(bindir_relative)
mandir = share/man
infodir = share/info
perfexecdir = libexec/perf-core
sharedir = $(prefix)/share
template_dir = share/perf-core/templates
htmldir = share/doc/perf-doc
ifeq ($(prefix),/usr)
sysconfdir = /etc
ETC_PERFCONFIG = $(sysconfdir)/perfconfig
else
sysconfdir = $(prefix)/etc
ETC_PERFCONFIG = etc/perfconfig
endif
lib = lib
export prefix bindir sharedir sysconfdir
RM = rm -f
MKDIR = mkdir
FIND = find
INSTALL = install
# sparse is architecture-neutral, which means that we need to tell it
# explicitly what architecture to check for. Fix this up for yours..
SPARSE_FLAGS = -D__BIG_ENDIAN__ -D__powerpc__
ifneq ($(MAKECMDGOALS),clean)
ifneq ($(MAKECMDGOALS),tags)
-include config/feature-tests.mak
ifeq ($(call try-cc,$(SOURCE_HELLO),$(CFLAGS) -Werror -fstack-protector-all,-fstack-protector-all),y)
CFLAGS := $(CFLAGS) -fstack-protector-all
endif
ifeq ($(call try-cc,$(SOURCE_HELLO),$(CFLAGS) -Werror -Wstack-protector,-Wstack-protector),y)
CFLAGS := $(CFLAGS) -Wstack-protector
endif
ifeq ($(call try-cc,$(SOURCE_HELLO),$(CFLAGS) -Werror -Wvolatile-register-var,-Wvolatile-register-var),y)
CFLAGS := $(CFLAGS) -Wvolatile-register-var
endif
### --- END CONFIGURATION SECTION ---
ifeq ($(srctree),)
srctree := $(patsubst %/,%,$(dir $(shell pwd)))
srctree := $(patsubst %/,%,$(dir $(srctree)))
#$(info Determined 'srctree' to be $(srctree))
endif
ifneq ($(objtree),)
#$(info Determined 'objtree' to be $(objtree))
endif
ifneq ($(OUTPUT),)
#$(info Determined 'OUTPUT' to be $(OUTPUT))
endif
BASIC_CFLAGS = \
-Iutil/include \
-Iarch/$(ARCH)/include \
$(if $(objtree),-I$(objtree)/arch/$(ARCH)/include/generated/uapi) \
-I$(srctree)/arch/$(ARCH)/include/uapi \
-I$(srctree)/arch/$(ARCH)/include \
$(if $(objtree),-I$(objtree)/include/generated/uapi) \
-I$(srctree)/include/uapi \
-I$(srctree)/include \
-I$(OUTPUT)util \
-Iutil \
-I. \
-I$(TRACE_EVENT_DIR) \
-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE
BASIC_LDFLAGS =
ifeq ($(call try-cc,$(SOURCE_BIONIC),$(CFLAGS),bionic),y)
BIONIC := 1
EXTLIBS := $(filter-out -lrt,$(EXTLIBS))
EXTLIBS := $(filter-out -lpthread,$(EXTLIBS))
BASIC_CFLAGS += -I.
endif
endif # MAKECMDGOALS != tags
endif # MAKECMDGOALS != clean
# Guard against environment variables
BUILTIN_OBJS =
LIB_H =
LIB_OBJS =
PYRF_OBJS =
SCRIPT_SH =
SCRIPT_SH += perf-archive.sh
grep-libs = $(filter -l%,$(1))
strip-libs = $(filter-out -l%,$(1))
TRACE_EVENT_DIR = ../lib/traceevent/
ifneq ($(OUTPUT),)
TE_PATH=$(OUTPUT)
else
TE_PATH=$(TRACE_EVENT_DIR)
endif
LIBTRACEEVENT = $(TE_PATH)libtraceevent.a
TE_LIB := -L$(TE_PATH) -ltraceevent
export LIBTRACEEVENT
# python extension build directories
PYTHON_EXTBUILD := $(OUTPUT)python_ext_build/
PYTHON_EXTBUILD_LIB := $(PYTHON_EXTBUILD)lib/
PYTHON_EXTBUILD_TMP := $(PYTHON_EXTBUILD)tmp/
export PYTHON_EXTBUILD_LIB PYTHON_EXTBUILD_TMP
python-clean := rm -rf $(PYTHON_EXTBUILD) $(OUTPUT)python/perf.so
PYTHON_EXT_SRCS := $(shell grep -v ^\# util/python-ext-sources)
PYTHON_EXT_DEPS := util/python-ext-sources util/setup.py
$(OUTPUT)python/perf.so: $(PYTHON_EXT_SRCS) $(PYTHON_EXT_DEPS)
$(QUIET_GEN)CFLAGS='$(BASIC_CFLAGS)' $(PYTHON_WORD) util/setup.py \
--quiet build_ext; \
mkdir -p $(OUTPUT)python && \
cp $(PYTHON_EXTBUILD_LIB)perf.so $(OUTPUT)python/
#
# No Perl scripts right now:
#
SCRIPTS = $(patsubst %.sh,%,$(SCRIPT_SH))
#
# Single 'perf' binary right now:
#
PROGRAMS += $(OUTPUT)perf
LANG_BINDINGS =
# what 'all' will build and 'install' will install, in perfexecdir
ALL_PROGRAMS = $(PROGRAMS) $(SCRIPTS)
# what 'all' will build but not install in perfexecdir
OTHER_PROGRAMS = $(OUTPUT)perf
# Set paths to tools early so that they can be used for version tests.
ifndef SHELL_PATH
SHELL_PATH = /bin/sh
endif
ifndef PERL_PATH
PERL_PATH = /usr/bin/perl
endif
export PERL_PATH
FLEX = flex
BISON= bison
$(OUTPUT)util/parse-events-flex.c: util/parse-events.l $(OUTPUT)util/parse-events-bison.c
$(QUIET_FLEX)$(FLEX) --header-file=$(OUTPUT)util/parse-events-flex.h $(PARSER_DEBUG_FLEX) -t util/parse-events.l > $(OUTPUT)util/parse-events-flex.c
$(OUTPUT)util/parse-events-bison.c: util/parse-events.y
$(QUIET_BISON)$(BISON) -v util/parse-events.y -d $(PARSER_DEBUG_BISON) -o $(OUTPUT)util/parse-events-bison.c
$(OUTPUT)util/pmu-flex.c: util/pmu.l $(OUTPUT)util/pmu-bison.c
$(QUIET_FLEX)$(FLEX) --header-file=$(OUTPUT)util/pmu-flex.h -t util/pmu.l > $(OUTPUT)util/pmu-flex.c
$(OUTPUT)util/pmu-bison.c: util/pmu.y
$(QUIET_BISON)$(BISON) -v util/pmu.y -d -o $(OUTPUT)util/pmu-bison.c
$(OUTPUT)util/parse-events.o: $(OUTPUT)util/parse-events-flex.c $(OUTPUT)util/parse-events-bison.c
$(OUTPUT)util/pmu.o: $(OUTPUT)util/pmu-flex.c $(OUTPUT)util/pmu-bison.c
LIB_FILE=$(OUTPUT)libperf.a
LIB_H += ../../include/uapi/linux/perf_event.h
LIB_H += ../../include/linux/rbtree.h
LIB_H += ../../include/linux/list.h
LIB_H += ../../include/uapi/linux/const.h
LIB_H += ../../include/linux/hash.h
LIB_H += ../../include/linux/stringify.h
LIB_H += util/include/linux/bitmap.h
LIB_H += util/include/linux/bitops.h
LIB_H += util/include/linux/compiler.h
LIB_H += util/include/linux/const.h
LIB_H += util/include/linux/ctype.h
LIB_H += util/include/linux/kernel.h
LIB_H += util/include/linux/list.h
LIB_H += util/include/linux/export.h
LIB_H += util/include/linux/magic.h
LIB_H += util/include/linux/poison.h
LIB_H += util/include/linux/prefetch.h
LIB_H += util/include/linux/rbtree.h
LIB_H += util/include/linux/rbtree_augmented.h
LIB_H += util/include/linux/string.h
LIB_H += util/include/linux/types.h
LIB_H += util/include/linux/linkage.h
LIB_H += util/include/asm/asm-offsets.h
LIB_H += util/include/asm/bug.h
LIB_H += util/include/asm/byteorder.h
LIB_H += util/include/asm/hweight.h
LIB_H += util/include/asm/swab.h
LIB_H += util/include/asm/system.h
LIB_H += util/include/asm/uaccess.h
LIB_H += util/include/dwarf-regs.h
LIB_H += util/include/asm/dwarf2.h
LIB_H += util/include/asm/cpufeature.h
LIB_H += util/include/asm/unistd_32.h
LIB_H += util/include/asm/unistd_64.h
LIB_H += perf.h
LIB_H += util/annotate.h
LIB_H += util/cache.h
LIB_H += util/callchain.h
LIB_H += util/build-id.h
LIB_H += util/debug.h
LIB_H += util/debugfs.h
LIB_H += util/sysfs.h
LIB_H += util/pmu.h
LIB_H += util/event.h
LIB_H += util/evsel.h
LIB_H += util/evlist.h
LIB_H += util/exec_cmd.h
LIB_H += util/types.h
LIB_H += util/levenshtein.h
LIB_H += util/machine.h
LIB_H += util/map.h
LIB_H += util/parse-options.h
LIB_H += util/parse-events.h
LIB_H += util/quote.h
LIB_H += util/util.h
LIB_H += util/xyarray.h
LIB_H += util/header.h
LIB_H += util/help.h
LIB_H += util/session.h
LIB_H += util/strbuf.h
LIB_H += util/strlist.h
LIB_H += util/strfilter.h
LIB_H += util/svghelper.h
LIB_H += util/tool.h
LIB_H += util/run-command.h
LIB_H += util/sigchain.h
LIB_H += util/dso.h
LIB_H += util/symbol.h
LIB_H += util/color.h
LIB_H += util/values.h
LIB_H += util/sort.h
LIB_H += util/hist.h
LIB_H += util/thread.h
LIB_H += util/thread_map.h
LIB_H += util/trace-event.h
LIB_H += util/probe-finder.h
LIB_H += util/dwarf-aux.h
LIB_H += util/probe-event.h
LIB_H += util/pstack.h
LIB_H += util/cpumap.h
LIB_H += util/top.h
LIB_H += $(ARCH_INCLUDE)
LIB_H += util/cgroup.h
LIB_H += $(TRACE_EVENT_DIR)event-parse.h
LIB_H += util/target.h
LIB_H += util/rblist.h
LIB_H += util/intlist.h
LIB_H += util/perf_regs.h
LIB_H += util/unwind.h
LIB_H += util/vdso.h
LIB_H += ui/helpline.h
LIB_H += ui/progress.h
LIB_H += ui/util.h
LIB_H += ui/ui.h
LIB_OBJS += $(OUTPUT)util/abspath.o
LIB_OBJS += $(OUTPUT)util/alias.o
LIB_OBJS += $(OUTPUT)util/annotate.o
LIB_OBJS += $(OUTPUT)util/build-id.o
LIB_OBJS += $(OUTPUT)util/config.o
LIB_OBJS += $(OUTPUT)util/ctype.o
LIB_OBJS += $(OUTPUT)util/debugfs.o
LIB_OBJS += $(OUTPUT)util/sysfs.o
LIB_OBJS += $(OUTPUT)util/pmu.o
LIB_OBJS += $(OUTPUT)util/environment.o
LIB_OBJS += $(OUTPUT)util/event.o
LIB_OBJS += $(OUTPUT)util/evlist.o
LIB_OBJS += $(OUTPUT)util/evsel.o
LIB_OBJS += $(OUTPUT)util/exec_cmd.o
LIB_OBJS += $(OUTPUT)util/help.o
LIB_OBJS += $(OUTPUT)util/levenshtein.o
LIB_OBJS += $(OUTPUT)util/parse-options.o
LIB_OBJS += $(OUTPUT)util/parse-events.o
LIB_OBJS += $(OUTPUT)util/path.o
LIB_OBJS += $(OUTPUT)util/rbtree.o
LIB_OBJS += $(OUTPUT)util/bitmap.o
LIB_OBJS += $(OUTPUT)util/hweight.o
LIB_OBJS += $(OUTPUT)util/run-command.o
LIB_OBJS += $(OUTPUT)util/quote.o
LIB_OBJS += $(OUTPUT)util/strbuf.o
LIB_OBJS += $(OUTPUT)util/string.o
LIB_OBJS += $(OUTPUT)util/strlist.o
LIB_OBJS += $(OUTPUT)util/strfilter.o
LIB_OBJS += $(OUTPUT)util/top.o
LIB_OBJS += $(OUTPUT)util/usage.o
LIB_OBJS += $(OUTPUT)util/wrapper.o
LIB_OBJS += $(OUTPUT)util/sigchain.o
LIB_OBJS += $(OUTPUT)util/dso.o
LIB_OBJS += $(OUTPUT)util/symbol.o
LIB_OBJS += $(OUTPUT)util/symbol-elf.o
LIB_OBJS += $(OUTPUT)util/color.o
LIB_OBJS += $(OUTPUT)util/pager.o
LIB_OBJS += $(OUTPUT)util/header.o
LIB_OBJS += $(OUTPUT)util/callchain.o
LIB_OBJS += $(OUTPUT)util/values.o
LIB_OBJS += $(OUTPUT)util/debug.o
LIB_OBJS += $(OUTPUT)util/machine.o
LIB_OBJS += $(OUTPUT)util/map.o
LIB_OBJS += $(OUTPUT)util/pstack.o
LIB_OBJS += $(OUTPUT)util/session.o
LIB_OBJS += $(OUTPUT)util/thread.o
LIB_OBJS += $(OUTPUT)util/thread_map.o
LIB_OBJS += $(OUTPUT)util/trace-event-parse.o
LIB_OBJS += $(OUTPUT)util/parse-events-flex.o
LIB_OBJS += $(OUTPUT)util/parse-events-bison.o
LIB_OBJS += $(OUTPUT)util/pmu-flex.o
LIB_OBJS += $(OUTPUT)util/pmu-bison.o
LIB_OBJS += $(OUTPUT)util/trace-event-read.o
LIB_OBJS += $(OUTPUT)util/trace-event-info.o
LIB_OBJS += $(OUTPUT)util/trace-event-scripting.o
LIB_OBJS += $(OUTPUT)util/svghelper.o
LIB_OBJS += $(OUTPUT)util/sort.o
LIB_OBJS += $(OUTPUT)util/hist.o
LIB_OBJS += $(OUTPUT)util/probe-event.o
LIB_OBJS += $(OUTPUT)util/util.o
LIB_OBJS += $(OUTPUT)util/xyarray.o
LIB_OBJS += $(OUTPUT)util/cpumap.o
LIB_OBJS += $(OUTPUT)util/cgroup.o
LIB_OBJS += $(OUTPUT)util/target.o
LIB_OBJS += $(OUTPUT)util/rblist.o
LIB_OBJS += $(OUTPUT)util/intlist.o
LIB_OBJS += $(OUTPUT)util/vdso.o
LIB_OBJS += $(OUTPUT)util/stat.o
LIB_OBJS += $(OUTPUT)ui/setup.o
LIB_OBJS += $(OUTPUT)ui/helpline.o
LIB_OBJS += $(OUTPUT)ui/progress.o
LIB_OBJS += $(OUTPUT)ui/util.o
LIB_OBJS += $(OUTPUT)ui/hist.o
LIB_OBJS += $(OUTPUT)ui/stdio/hist.o
LIB_OBJS += $(OUTPUT)arch/common.o
LIB_OBJS += $(OUTPUT)tests/parse-events.o
LIB_OBJS += $(OUTPUT)tests/dso-data.o
LIB_OBJS += $(OUTPUT)tests/attr.o
LIB_OBJS += $(OUTPUT)tests/vmlinux-kallsyms.o
LIB_OBJS += $(OUTPUT)tests/open-syscall.o
LIB_OBJS += $(OUTPUT)tests/open-syscall-all-cpus.o
LIB_OBJS += $(OUTPUT)tests/open-syscall-tp-fields.o
LIB_OBJS += $(OUTPUT)tests/mmap-basic.o
LIB_OBJS += $(OUTPUT)tests/perf-record.o
LIB_OBJS += $(OUTPUT)tests/rdpmc.o
LIB_OBJS += $(OUTPUT)tests/evsel-roundtrip-name.o
LIB_OBJS += $(OUTPUT)tests/evsel-tp-sched.o
LIB_OBJS += $(OUTPUT)tests/pmu.o
LIB_OBJS += $(OUTPUT)tests/hists_link.o
LIB_OBJS += $(OUTPUT)tests/python-use.o
BUILTIN_OBJS += $(OUTPUT)builtin-annotate.o
BUILTIN_OBJS += $(OUTPUT)builtin-bench.o
# Benchmark modules
BUILTIN_OBJS += $(OUTPUT)bench/numa.o
BUILTIN_OBJS += $(OUTPUT)bench/sched-messaging.o
BUILTIN_OBJS += $(OUTPUT)bench/sched-pipe.o
ifeq ($(RAW_ARCH),x86_64)
BUILTIN_OBJS += $(OUTPUT)bench/mem-memcpy-x86-64-asm.o
BUILTIN_OBJS += $(OUTPUT)bench/mem-memset-x86-64-asm.o
endif
BUILTIN_OBJS += $(OUTPUT)bench/mem-memcpy.o
BUILTIN_OBJS += $(OUTPUT)bench/mem-memset.o
BUILTIN_OBJS += $(OUTPUT)builtin-diff.o
BUILTIN_OBJS += $(OUTPUT)builtin-evlist.o
BUILTIN_OBJS += $(OUTPUT)builtin-help.o
BUILTIN_OBJS += $(OUTPUT)builtin-sched.o
BUILTIN_OBJS += $(OUTPUT)builtin-buildid-list.o
BUILTIN_OBJS += $(OUTPUT)builtin-buildid-cache.o
BUILTIN_OBJS += $(OUTPUT)builtin-list.o
BUILTIN_OBJS += $(OUTPUT)builtin-record.o
BUILTIN_OBJS += $(OUTPUT)builtin-report.o
BUILTIN_OBJS += $(OUTPUT)builtin-stat.o
BUILTIN_OBJS += $(OUTPUT)builtin-timechart.o
BUILTIN_OBJS += $(OUTPUT)builtin-top.o
BUILTIN_OBJS += $(OUTPUT)builtin-script.o
BUILTIN_OBJS += $(OUTPUT)builtin-probe.o
BUILTIN_OBJS += $(OUTPUT)builtin-kmem.o
BUILTIN_OBJS += $(OUTPUT)builtin-lock.o
BUILTIN_OBJS += $(OUTPUT)builtin-kvm.o
BUILTIN_OBJS += $(OUTPUT)builtin-inject.o
BUILTIN_OBJS += $(OUTPUT)tests/builtin-test.o
PERFLIBS = $(LIB_FILE) $(LIBTRACEEVENT)
#
# Platform specific tweaks
#
ifneq ($(MAKECMDGOALS),clean)
ifneq ($(MAKECMDGOALS),tags)
# We choose to avoid "if .. else if .. else .. endif endif"
# because maintaining the nesting to match is a pain. If
# we had "elif" things would have been much nicer...
ifdef NO_LIBELF
NO_DWARF := 1
NO_DEMANGLE := 1
NO_LIBUNWIND := 1
else
FLAGS_LIBELF=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS)
ifneq ($(call try-cc,$(SOURCE_LIBELF),$(FLAGS_LIBELF),libelf),y)
FLAGS_GLIBC=$(ALL_CFLAGS) $(ALL_LDFLAGS)
ifeq ($(call try-cc,$(SOURCE_GLIBC),$(FLAGS_GLIBC),glibc),y)
LIBC_SUPPORT := 1
endif
ifeq ($(BIONIC),1)
LIBC_SUPPORT := 1
endif
ifeq ($(LIBC_SUPPORT),1)
msg := $(warning No libelf found, disables 'probe' tool, please install elfutils-libelf-devel/libelf-dev);
NO_LIBELF := 1
NO_DWARF := 1
NO_DEMANGLE := 1
else
msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]/glibc-static);
endif
else
# for linking with debug library, run like:
# make DEBUG=1 LIBDW_DIR=/opt/libdw/
ifdef LIBDW_DIR
LIBDW_CFLAGS := -I$(LIBDW_DIR)/include
LIBDW_LDFLAGS := -L$(LIBDW_DIR)/lib
endif
FLAGS_DWARF=$(ALL_CFLAGS) $(LIBDW_CFLAGS) -ldw -lelf $(LIBDW_LDFLAGS) $(ALL_LDFLAGS) $(EXTLIBS)
ifneq ($(call try-cc,$(SOURCE_DWARF),$(FLAGS_DWARF),libdw),y)
msg := $(warning No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev);
NO_DWARF := 1
endif # Dwarf support
endif # SOURCE_LIBELF
endif # NO_LIBELF
ifndef NO_LIBUNWIND
# for linking with debug library, run like:
# make DEBUG=1 LIBUNWIND_DIR=/opt/libunwind/
ifdef LIBUNWIND_DIR
LIBUNWIND_CFLAGS := -I$(LIBUNWIND_DIR)/include
LIBUNWIND_LDFLAGS := -L$(LIBUNWIND_DIR)/lib
endif
FLAGS_UNWIND=$(LIBUNWIND_CFLAGS) $(ALL_CFLAGS) $(LIBUNWIND_LDFLAGS) $(ALL_LDFLAGS) $(EXTLIBS) $(LIBUNWIND_LIBS)
ifneq ($(call try-cc,$(SOURCE_LIBUNWIND),$(FLAGS_UNWIND),libunwind),y)
msg := $(warning No libunwind found, disabling post unwind support. Please install libunwind-dev[el] >= 0.99);
NO_LIBUNWIND := 1
endif # Libunwind support
endif # NO_LIBUNWIND
-include arch/$(ARCH)/Makefile
ifneq ($(OUTPUT),)
BASIC_CFLAGS += -I$(OUTPUT)
endif
ifdef NO_LIBELF
EXTLIBS := $(filter-out -lelf,$(EXTLIBS))
# Remove ELF/DWARF dependent codes
LIB_OBJS := $(filter-out $(OUTPUT)util/symbol-elf.o,$(LIB_OBJS))
LIB_OBJS := $(filter-out $(OUTPUT)util/dwarf-aux.o,$(LIB_OBJS))
LIB_OBJS := $(filter-out $(OUTPUT)util/probe-event.o,$(LIB_OBJS))
LIB_OBJS := $(filter-out $(OUTPUT)util/probe-finder.o,$(LIB_OBJS))
BUILTIN_OBJS := $(filter-out $(OUTPUT)builtin-probe.o,$(BUILTIN_OBJS))
# Use minimal symbol handling
LIB_OBJS += $(OUTPUT)util/symbol-minimal.o
else # NO_LIBELF
BASIC_CFLAGS += -DLIBELF_SUPPORT
FLAGS_LIBELF=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS)
ifeq ($(call try-cc,$(SOURCE_ELF_MMAP),$(FLAGS_LIBELF),-DLIBELF_MMAP),y)
BASIC_CFLAGS += -DLIBELF_MMAP
endif
ifndef NO_DWARF
ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled);
else
BASIC_CFLAGS := -DDWARF_SUPPORT $(LIBDW_CFLAGS) $(BASIC_CFLAGS)
BASIC_LDFLAGS := $(LIBDW_LDFLAGS) $(BASIC_LDFLAGS)
EXTLIBS += -lelf -ldw
LIB_OBJS += $(OUTPUT)util/probe-finder.o
LIB_OBJS += $(OUTPUT)util/dwarf-aux.o
endif # PERF_HAVE_DWARF_REGS
endif # NO_DWARF
endif # NO_LIBELF
ifndef NO_LIBUNWIND
BASIC_CFLAGS += -DLIBUNWIND_SUPPORT
EXTLIBS += $(LIBUNWIND_LIBS)
BASIC_CFLAGS := $(LIBUNWIND_CFLAGS) $(BASIC_CFLAGS)
BASIC_LDFLAGS := $(LIBUNWIND_LDFLAGS) $(BASIC_LDFLAGS)
LIB_OBJS += $(OUTPUT)util/unwind.o
endif
ifndef NO_LIBAUDIT
FLAGS_LIBAUDIT = $(ALL_CFLAGS) $(ALL_LDFLAGS) -laudit
ifneq ($(call try-cc,$(SOURCE_LIBAUDIT),$(FLAGS_LIBAUDIT),libaudit),y)
msg := $(warning No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev);
else
BASIC_CFLAGS += -DLIBAUDIT_SUPPORT
BUILTIN_OBJS += $(OUTPUT)builtin-trace.o
EXTLIBS += -laudit
endif
endif
ifndef NO_NEWT
FLAGS_NEWT=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS) -lnewt
ifneq ($(call try-cc,$(SOURCE_NEWT),$(FLAGS_NEWT),libnewt),y)
msg := $(warning newt not found, disables TUI support. Please install newt-devel or libnewt-dev);
else
# Fedora has /usr/include/slang/slang.h, but ubuntu /usr/include/slang.h
BASIC_CFLAGS += -I/usr/include/slang
BASIC_CFLAGS += -DNEWT_SUPPORT
EXTLIBS += -lnewt -lslang
LIB_OBJS += $(OUTPUT)ui/browser.o
LIB_OBJS += $(OUTPUT)ui/browsers/annotate.o
LIB_OBJS += $(OUTPUT)ui/browsers/hists.o
LIB_OBJS += $(OUTPUT)ui/browsers/map.o
LIB_OBJS += $(OUTPUT)ui/browsers/scripts.o
LIB_OBJS += $(OUTPUT)ui/tui/setup.o
LIB_OBJS += $(OUTPUT)ui/tui/util.o
LIB_OBJS += $(OUTPUT)ui/tui/helpline.o
LIB_OBJS += $(OUTPUT)ui/tui/progress.o
LIB_H += ui/browser.h
LIB_H += ui/browsers/map.h
LIB_H += ui/keysyms.h
LIB_H += ui/libslang.h
endif
endif
ifndef NO_GTK2
FLAGS_GTK2=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS) $(shell pkg-config --libs --cflags gtk+-2.0 2>/dev/null)
ifneq ($(call try-cc,$(SOURCE_GTK2),$(FLAGS_GTK2),gtk2),y)
msg := $(warning GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev);
else
ifeq ($(call try-cc,$(SOURCE_GTK2_INFOBAR),$(FLAGS_GTK2),-DHAVE_GTK_INFO_BAR),y)
BASIC_CFLAGS += -DHAVE_GTK_INFO_BAR
endif
BASIC_CFLAGS += -DGTK2_SUPPORT
BASIC_CFLAGS += $(shell pkg-config --cflags gtk+-2.0 2>/dev/null)
EXTLIBS += $(shell pkg-config --libs gtk+-2.0 2>/dev/null)
LIB_OBJS += $(OUTPUT)ui/gtk/browser.o
LIB_OBJS += $(OUTPUT)ui/gtk/hists.o
LIB_OBJS += $(OUTPUT)ui/gtk/setup.o
LIB_OBJS += $(OUTPUT)ui/gtk/util.o
LIB_OBJS += $(OUTPUT)ui/gtk/helpline.o
LIB_OBJS += $(OUTPUT)ui/gtk/progress.o
endif
endif
ifdef NO_LIBPERL
BASIC_CFLAGS += -DNO_LIBPERL
else
PERL_EMBED_LDOPTS = $(shell perl -MExtUtils::Embed -e ldopts 2>/dev/null)
PERL_EMBED_LDFLAGS = $(call strip-libs,$(PERL_EMBED_LDOPTS))
PERL_EMBED_LIBADD = $(call grep-libs,$(PERL_EMBED_LDOPTS))
PERL_EMBED_CCOPTS = `perl -MExtUtils::Embed -e ccopts 2>/dev/null`
FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS)
ifneq ($(call try-cc,$(SOURCE_PERL_EMBED),$(FLAGS_PERL_EMBED),perl),y)
BASIC_CFLAGS += -DNO_LIBPERL
else
ALL_LDFLAGS += $(PERL_EMBED_LDFLAGS)
EXTLIBS += $(PERL_EMBED_LIBADD)
LIB_OBJS += $(OUTPUT)util/scripting-engines/trace-event-perl.o
LIB_OBJS += $(OUTPUT)scripts/perl/Perf-Trace-Util/Context.o
endif
endif
disable-python = $(eval $(disable-python_code))
define disable-python_code
BASIC_CFLAGS += -DNO_LIBPYTHON
$(if $(1),$(warning No $(1) was found))
$(warning Python support will not be built)
endef
override PYTHON := \
$(call get-executable-or-default,PYTHON,python)
ifndef PYTHON
$(call disable-python,python interpreter)
else
PYTHON_WORD := $(call shell-wordify,$(PYTHON))
ifdef NO_LIBPYTHON
$(call disable-python)
else
override PYTHON_CONFIG := \
$(call get-executable-or-default,PYTHON_CONFIG,$(PYTHON)-config)
ifndef PYTHON_CONFIG
$(call disable-python,python-config tool)
else
PYTHON_CONFIG_SQ := $(call shell-sq,$(PYTHON_CONFIG))
PYTHON_EMBED_LDOPTS := $(shell $(PYTHON_CONFIG_SQ) --ldflags 2>/dev/null)
PYTHON_EMBED_LDFLAGS := $(call strip-libs,$(PYTHON_EMBED_LDOPTS))
PYTHON_EMBED_LIBADD := $(call grep-libs,$(PYTHON_EMBED_LDOPTS))
PYTHON_EMBED_CCOPTS := $(shell $(PYTHON_CONFIG_SQ) --cflags 2>/dev/null)
FLAGS_PYTHON_EMBED := $(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS)
ifneq ($(call try-cc,$(SOURCE_PYTHON_EMBED),$(FLAGS_PYTHON_EMBED),python),y)
$(call disable-python,Python.h (for Python 2.x))
else
ifneq ($(call try-cc,$(SOURCE_PYTHON_VERSION),$(FLAGS_PYTHON_EMBED),python version),y)
$(warning Python 3 is not yet supported; please set)
$(warning PYTHON and/or PYTHON_CONFIG appropriately.)
$(warning If you also have Python 2 installed, then)
$(warning try something like:)
$(warning $(and ,))
$(warning $(and ,) make PYTHON=python2)
$(warning $(and ,))
$(warning Otherwise, disable Python support entirely:)
$(warning $(and ,))
$(warning $(and ,) make NO_LIBPYTHON=1)
$(warning $(and ,))
$(error $(and ,))
else
ALL_LDFLAGS += $(PYTHON_EMBED_LDFLAGS)
EXTLIBS += $(PYTHON_EMBED_LIBADD)
LIB_OBJS += $(OUTPUT)util/scripting-engines/trace-event-python.o
LIB_OBJS += $(OUTPUT)scripts/python/Perf-Trace-Util/Context.o
LANG_BINDINGS += $(OUTPUT)python/perf.so
endif
endif
endif
endif
endif
ifdef NO_DEMANGLE
BASIC_CFLAGS += -DNO_DEMANGLE
else
ifdef HAVE_CPLUS_DEMANGLE
EXTLIBS += -liberty
BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
else
FLAGS_BFD=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS) -DPACKAGE='perf' -lbfd
has_bfd := $(call try-cc,$(SOURCE_BFD),$(FLAGS_BFD),libbfd)
ifeq ($(has_bfd),y)
EXTLIBS += -lbfd
else
FLAGS_BFD_IBERTY=$(FLAGS_BFD) -liberty
has_bfd_iberty := $(call try-cc,$(SOURCE_BFD),$(FLAGS_BFD_IBERTY),liberty)
ifeq ($(has_bfd_iberty),y)
EXTLIBS += -lbfd -liberty
else
FLAGS_BFD_IBERTY_Z=$(FLAGS_BFD_IBERTY) -lz
has_bfd_iberty_z := $(call try-cc,$(SOURCE_BFD),$(FLAGS_BFD_IBERTY_Z),libz)
ifeq ($(has_bfd_iberty_z),y)
EXTLIBS += -lbfd -liberty -lz
else
FLAGS_CPLUS_DEMANGLE=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS) -liberty
has_cplus_demangle := $(call try-cc,$(SOURCE_CPLUS_DEMANGLE),$(FLAGS_CPLUS_DEMANGLE),demangle)
ifeq ($(has_cplus_demangle),y)
EXTLIBS += -liberty
BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
else
msg := $(warning No bfd.h/libbfd found, install binutils-dev[el]/zlib-static to gain symbol demangling)
BASIC_CFLAGS += -DNO_DEMANGLE
endif
endif
endif
endif
endif
endif
ifeq ($(NO_PERF_REGS),0)
ifeq ($(ARCH),x86)
LIB_H += arch/x86/include/perf_regs.h
endif
BASIC_CFLAGS += -DHAVE_PERF_REGS
endif
ifndef NO_STRLCPY
ifeq ($(call try-cc,$(SOURCE_STRLCPY),,-DHAVE_STRLCPY),y)
BASIC_CFLAGS += -DHAVE_STRLCPY
endif
endif
ifndef NO_ON_EXIT
ifeq ($(call try-cc,$(SOURCE_ON_EXIT),,-DHAVE_ON_EXIT),y)
BASIC_CFLAGS += -DHAVE_ON_EXIT
endif
endif
ifndef NO_BACKTRACE
ifeq ($(call try-cc,$(SOURCE_BACKTRACE),,-DBACKTRACE_SUPPORT),y)
BASIC_CFLAGS += -DBACKTRACE_SUPPORT
endif
endif
ifdef ASCIIDOC8
export ASCIIDOC8
endif
endif # MAKECMDGOALS != tags
endif # MAKECMDGOALS != clean
# Shell quote (do not use $(call) to accommodate ancient setups);
ETC_PERFCONFIG_SQ = $(subst ','\'',$(ETC_PERFCONFIG))
DESTDIR_SQ = $(subst ','\'',$(DESTDIR))
bindir_SQ = $(subst ','\'',$(bindir))
bindir_relative_SQ = $(subst ','\'',$(bindir_relative))
mandir_SQ = $(subst ','\'',$(mandir))
infodir_SQ = $(subst ','\'',$(infodir))
perfexecdir_SQ = $(subst ','\'',$(perfexecdir))
template_dir_SQ = $(subst ','\'',$(template_dir))
htmldir_SQ = $(subst ','\'',$(htmldir))
prefix_SQ = $(subst ','\'',$(prefix))
sysconfdir_SQ = $(subst ','\'',$(sysconfdir))
SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH))
LIBS = -Wl,--whole-archive $(PERFLIBS) -Wl,--no-whole-archive -Wl,--start-group $(EXTLIBS) -Wl,--end-group
ALL_CFLAGS += $(BASIC_CFLAGS)
ALL_CFLAGS += $(ARCH_CFLAGS)
ALL_LDFLAGS += $(BASIC_LDFLAGS)
export INSTALL SHELL_PATH
### Build rules
SHELL = $(SHELL_PATH)
all: shell_compatibility_test $(ALL_PROGRAMS) $(LANG_BINDINGS) $(OTHER_PROGRAMS)
please_set_SHELL_PATH_to_a_more_modern_shell:
@$$(:)
shell_compatibility_test: please_set_SHELL_PATH_to_a_more_modern_shell
strip: $(PROGRAMS) $(OUTPUT)perf
$(STRIP) $(STRIP_OPTS) $(PROGRAMS) $(OUTPUT)perf
$(OUTPUT)perf.o: perf.c $(OUTPUT)common-cmds.h $(OUTPUT)PERF-CFLAGS
$(QUIET_CC)$(CC) -include $(OUTPUT)PERF-VERSION-FILE \
'-DPERF_HTML_PATH="$(htmldir_SQ)"' \
$(ALL_CFLAGS) -c $(filter %.c,$^) -o $@
$(OUTPUT)perf: $(OUTPUT)perf.o $(BUILTIN_OBJS) $(PERFLIBS)
$(QUIET_LINK)$(CC) $(ALL_CFLAGS) $(ALL_LDFLAGS) $(OUTPUT)perf.o \
$(BUILTIN_OBJS) $(LIBS) -o $@
$(OUTPUT)builtin-help.o: builtin-help.c $(OUTPUT)common-cmds.h $(OUTPUT)PERF-CFLAGS
$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) \
'-DPERF_HTML_PATH="$(htmldir_SQ)"' \
'-DPERF_MAN_PATH="$(mandir_SQ)"' \
'-DPERF_INFO_PATH="$(infodir_SQ)"' $<
$(OUTPUT)builtin-timechart.o: builtin-timechart.c $(OUTPUT)common-cmds.h $(OUTPUT)PERF-CFLAGS
$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) \
'-DPERF_HTML_PATH="$(htmldir_SQ)"' \
'-DPERF_MAN_PATH="$(mandir_SQ)"' \
'-DPERF_INFO_PATH="$(infodir_SQ)"' $<
$(OUTPUT)common-cmds.h: util/generate-cmdlist.sh command-list.txt
$(OUTPUT)common-cmds.h: $(wildcard Documentation/perf-*.txt)
$(QUIET_GEN). util/generate-cmdlist.sh > $@+ && mv $@+ $@
$(SCRIPTS) : % : %.sh
$(QUIET_GEN)$(INSTALL) '$@.sh' '$(OUTPUT)$@'
# These can record PERF_VERSION
$(OUTPUT)perf.o perf.spec \
$(SCRIPTS) \
: $(OUTPUT)PERF-VERSION-FILE
.SUFFIXES:
.SUFFIXES: .o .c .S .s
# These two need to be here so that when O= is not used they take precedence
# over the general rule for .o
$(OUTPUT)util/%-flex.o: $(OUTPUT)util/%-flex.c $(OUTPUT)PERF-CFLAGS
$(QUIET_CC)$(CC) -o $@ -c -Iutil/ $(ALL_CFLAGS) -w $<
$(OUTPUT)util/%-bison.o: $(OUTPUT)util/%-bison.c $(OUTPUT)PERF-CFLAGS
$(QUIET_CC)$(CC) -o $@ -c -Iutil/ $(ALL_CFLAGS) -DYYENABLE_NLS=0 -DYYLTYPE_IS_TRIVIAL=0 -w $<
$(OUTPUT)%.o: %.c $(OUTPUT)PERF-CFLAGS
$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $<
$(OUTPUT)%.i: %.c $(OUTPUT)PERF-CFLAGS
$(QUIET_CC)$(CC) -o $@ -E $(ALL_CFLAGS) $<
$(OUTPUT)%.s: %.c $(OUTPUT)PERF-CFLAGS
$(QUIET_CC)$(CC) -o $@ -S $(ALL_CFLAGS) $<
$(OUTPUT)%.o: %.S
$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $<
$(OUTPUT)%.s: %.S
$(QUIET_CC)$(CC) -o $@ -E $(ALL_CFLAGS) $<
$(OUTPUT)util/exec_cmd.o: util/exec_cmd.c $(OUTPUT)PERF-CFLAGS
$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) \
'-DPERF_EXEC_PATH="$(perfexecdir_SQ)"' \
'-DPREFIX="$(prefix_SQ)"' \
$<
$(OUTPUT)tests/attr.o: tests/attr.c $(OUTPUT)PERF-CFLAGS
$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) \
'-DBINDIR="$(bindir_SQ)"' -DPYTHON='"$(PYTHON_WORD)"' \
$<
$(OUTPUT)tests/python-use.o: tests/python-use.c $(OUTPUT)PERF-CFLAGS
$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) \
-DPYTHONPATH='"$(OUTPUT)python"' \
-DPYTHON='"$(PYTHON_WORD)"' \
$<
$(OUTPUT)util/config.o: util/config.c $(OUTPUT)PERF-CFLAGS
$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
$(OUTPUT)ui/browser.o: ui/browser.c $(OUTPUT)PERF-CFLAGS
$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DENABLE_SLFUTURE_CONST $<
$(OUTPUT)ui/browsers/annotate.o: ui/browsers/annotate.c $(OUTPUT)PERF-CFLAGS
$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DENABLE_SLFUTURE_CONST $<
$(OUTPUT)ui/browsers/hists.o: ui/browsers/hists.c $(OUTPUT)PERF-CFLAGS
$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DENABLE_SLFUTURE_CONST $<
$(OUTPUT)ui/browsers/map.o: ui/browsers/map.c $(OUTPUT)PERF-CFLAGS
$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DENABLE_SLFUTURE_CONST $<
$(OUTPUT)ui/browsers/scripts.o: ui/browsers/scripts.c $(OUTPUT)PERF-CFLAGS
$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DENABLE_SLFUTURE_CONST $<
$(OUTPUT)util/rbtree.o: ../../lib/rbtree.c $(OUTPUT)PERF-CFLAGS
$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -Wno-unused-parameter -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
$(OUTPUT)util/parse-events.o: util/parse-events.c $(OUTPUT)PERF-CFLAGS
$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -Wno-redundant-decls $<
$(OUTPUT)util/scripting-engines/trace-event-perl.o: util/scripting-engines/trace-event-perl.c $(OUTPUT)PERF-CFLAGS
$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PERL_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-shadow $<
$(OUTPUT)scripts/perl/Perf-Trace-Util/Context.o: scripts/perl/Perf-Trace-Util/Context.c $(OUTPUT)PERF-CFLAGS
$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PERL_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-nested-externs $<
$(OUTPUT)util/scripting-engines/trace-event-python.o: util/scripting-engines/trace-event-python.c $(OUTPUT)PERF-CFLAGS
$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PYTHON_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-shadow $<
$(OUTPUT)scripts/python/Perf-Trace-Util/Context.o: scripts/python/Perf-Trace-Util/Context.c $(OUTPUT)PERF-CFLAGS
$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PYTHON_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-nested-externs $<
$(OUTPUT)perf-%: %.o $(PERFLIBS)
$(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) $(LIBS)
$(LIB_OBJS) $(BUILTIN_OBJS): $(LIB_H)
$(patsubst perf-%,%.o,$(PROGRAMS)): $(LIB_H) $(wildcard */*.h)
# we compile into subdirectories. if the target directory is not the source directory, they might not exists. So
# we depend the various files onto their directories.
DIRECTORY_DEPS = $(LIB_OBJS) $(BUILTIN_OBJS) $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)common-cmds.h
$(DIRECTORY_DEPS): | $(sort $(dir $(DIRECTORY_DEPS)))
# In the second step, we make a rule to actually create these directories
$(sort $(dir $(DIRECTORY_DEPS))):
$(QUIET_MKDIR)$(MKDIR) -p $@ 2>/dev/null
$(LIB_FILE): $(LIB_OBJS)
$(QUIET_AR)$(RM) $@ && $(AR) rcs $@ $(LIB_OBJS)
# libtraceevent.a
$(LIBTRACEEVENT):
$(QUIET_SUBDIR0)$(TRACE_EVENT_DIR) $(QUIET_SUBDIR1) O=$(OUTPUT) libtraceevent.a
$(LIBTRACEEVENT)-clean:
$(QUIET_SUBDIR0)$(TRACE_EVENT_DIR) $(QUIET_SUBDIR1) O=$(OUTPUT) clean
help:
@echo 'Perf make targets:'
@echo ' doc - make *all* documentation (see below)'
@echo ' man - make manpage documentation (access with man <foo>)'
@echo ' html - make html documentation'
@echo ' info - make GNU info documentation (access with info <foo>)'
@echo ' pdf - make pdf documentation'
@echo ' TAGS - use etags to make tag information for source browsing'
@echo ' tags - use ctags to make tag information for source browsing'
@echo ' cscope - use cscope to make interactive browsing database'
@echo ''
@echo 'Perf install targets:'
@echo ' NOTE: documentation build requires asciidoc, xmlto packages to be installed'
@echo ' HINT: use "make prefix=<path> <install target>" to install to a particular'
@echo ' path like make prefix=/usr/local install install-doc'
@echo ' install - install compiled binaries'
@echo ' install-doc - install *all* documentation'
@echo ' install-man - install manpage documentation'
@echo ' install-html - install html documentation'
@echo ' install-info - install GNU info documentation'
@echo ' install-pdf - install pdf documentation'
@echo ''
@echo ' quick-install-doc - alias for quick-install-man'
@echo ' quick-install-man - install the documentation quickly'
@echo ' quick-install-html - install the html documentation quickly'
@echo ''
@echo 'Perf maintainer targets:'
@echo ' clean - clean all binary objects and build output'
DOC_TARGETS := doc man html info pdf
INSTALL_DOC_TARGETS := $(patsubst %,install-%,$(DOC_TARGETS)) try-install-man
INSTALL_DOC_TARGETS += quick-install-doc quick-install-man quick-install-html
# 'make doc' should call 'make -C Documentation all'
$(DOC_TARGETS):
$(QUIET_SUBDIR0)Documentation $(QUIET_SUBDIR1) $(@:doc=all)
TAGS:
$(RM) TAGS
$(FIND) . -name '*.[hcS]' -print | xargs etags -a
tags:
$(RM) tags
$(FIND) . -name '*.[hcS]' -print | xargs ctags -a
cscope:
$(RM) cscope*
$(FIND) . -name '*.[hcS]' -print | xargs cscope -b
### Detect prefix changes
TRACK_CFLAGS = $(subst ','\'',$(ALL_CFLAGS)):\
$(bindir_SQ):$(perfexecdir_SQ):$(template_dir_SQ):$(prefix_SQ)
$(OUTPUT)PERF-CFLAGS: .FORCE-PERF-CFLAGS
@FLAGS='$(TRACK_CFLAGS)'; \
if test x"$$FLAGS" != x"`cat $(OUTPUT)PERF-CFLAGS 2>/dev/null`" ; then \
echo 1>&2 " * new build flags or prefix"; \
echo "$$FLAGS" >$(OUTPUT)PERF-CFLAGS; \
fi
### Testing rules
# GNU make supports exporting all variables by "export" without parameters.
# However, the environment gets quite big, and some programs have problems
# with that.
check: $(OUTPUT)common-cmds.h
if sparse; \
then \
for i in *.c */*.c; \
do \
sparse $(ALL_CFLAGS) $(SPARSE_FLAGS) $$i || exit; \
done; \
else \
exit 1; \
fi
### Installation rules
ifneq ($(filter /%,$(firstword $(perfexecdir))),)
perfexec_instdir = $(perfexecdir)
else
perfexec_instdir = $(prefix)/$(perfexecdir)
endif
perfexec_instdir_SQ = $(subst ','\'',$(perfexec_instdir))
install-bin: all
$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(bindir_SQ)'
$(INSTALL) $(OUTPUT)perf '$(DESTDIR_SQ)$(bindir_SQ)'
$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/Perf-Trace-Util/lib/Perf/Trace'
$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/bin'
$(INSTALL) $(OUTPUT)perf-archive -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)'
$(INSTALL) scripts/perl/Perf-Trace-Util/lib/Perf/Trace/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/Perf-Trace-Util/lib/Perf/Trace'
$(INSTALL) scripts/perl/*.pl -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl'
$(INSTALL) scripts/perl/bin/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/bin'
$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/Perf-Trace-Util/lib/Perf/Trace'
$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/bin'
$(INSTALL) scripts/python/Perf-Trace-Util/lib/Perf/Trace/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/Perf-Trace-Util/lib/Perf/Trace'
$(INSTALL) scripts/python/*.py -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python'
$(INSTALL) scripts/python/bin/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/bin'
$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(sysconfdir_SQ)/bash_completion.d'
$(INSTALL) bash_completion '$(DESTDIR_SQ)$(sysconfdir_SQ)/bash_completion.d/perf'
$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests'
$(INSTALL) tests/attr.py '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests'
$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/attr'
$(INSTALL) tests/attr/* '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/attr'
install: install-bin try-install-man
install-python_ext:
$(PYTHON_WORD) util/setup.py --quiet install --root='/$(DESTDIR_SQ)'
# 'make install-doc' should call 'make -C Documentation install'
$(INSTALL_DOC_TARGETS):
$(QUIET_SUBDIR0)Documentation $(QUIET_SUBDIR1) $(@:-doc=)
### Cleaning rules
clean: $(LIBTRACEEVENT)-clean
$(RM) $(LIB_OBJS) $(BUILTIN_OBJS) $(LIB_FILE) $(OUTPUT)perf-archive $(OUTPUT)perf.o $(LANG_BINDINGS)
$(RM) $(ALL_PROGRAMS) perf
$(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo $(OUTPUT)common-cmds.h TAGS tags cscope*
$(QUIET_SUBDIR0)Documentation $(QUIET_SUBDIR1) clean
$(RM) $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)PERF-CFLAGS
$(RM) $(OUTPUT)util/*-bison*
$(RM) $(OUTPUT)util/*-flex*
$(python-clean)
.PHONY: all install clean strip $(LIBTRACEEVENT)
.PHONY: shell_compatibility_test please_set_SHELL_PATH_to_a_more_modern_shell
.PHONY: .FORCE-PERF-VERSION-FILE TAGS tags cscope .FORCE-PERF-CFLAGS
Reference in a new issue View git blame Copy permalink