704a0b5f23
Going over the virtio mmio code, I noticed that it doesn't correctly access modern device config values using "natural" accessors: it uses readb to get/set them byte by byte, while the virtio 1.0 spec explicitly states: 4.2.2.2 Driver Requirements: MMIO Device Register Layout ... The driver MUST only use 32 bit wide and aligned reads and writes to access the control registers described in table 4.1. For the device-specific configuration space, the driver MUST use 8 bit wide accesses for 8 bit wide fields, 16 bit wide and aligned accesses for 16 bit wide fields and 32 bit wide and aligned accesses for 32 and 64 bit wide fields. Borrow code from virtio_pci_modern to do this correctly. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
768 lines
19 KiB
C
768 lines
19 KiB
C
/*
|
|
* Virtio memory mapped device driver
|
|
*
|
|
* Copyright 2011-2014, ARM Ltd.
|
|
*
|
|
* This module allows virtio devices to be used over a virtual, memory mapped
|
|
* platform device.
|
|
*
|
|
* The guest device(s) may be instantiated in one of three equivalent ways:
|
|
*
|
|
* 1. Static platform device in board's code, eg.:
|
|
*
|
|
* static struct platform_device v2m_virtio_device = {
|
|
* .name = "virtio-mmio",
|
|
* .id = -1,
|
|
* .num_resources = 2,
|
|
* .resource = (struct resource []) {
|
|
* {
|
|
* .start = 0x1001e000,
|
|
* .end = 0x1001e0ff,
|
|
* .flags = IORESOURCE_MEM,
|
|
* }, {
|
|
* .start = 42 + 32,
|
|
* .end = 42 + 32,
|
|
* .flags = IORESOURCE_IRQ,
|
|
* },
|
|
* }
|
|
* };
|
|
*
|
|
* 2. Device Tree node, eg.:
|
|
*
|
|
* virtio_block@1e000 {
|
|
* compatible = "virtio,mmio";
|
|
* reg = <0x1e000 0x100>;
|
|
* interrupts = <42>;
|
|
* }
|
|
*
|
|
* 3. Kernel module (or command line) parameter. Can be used more than once -
|
|
* one device will be created for each one. Syntax:
|
|
*
|
|
* [virtio_mmio.]device=<size>@<baseaddr>:<irq>[:<id>]
|
|
* where:
|
|
* <size> := size (can use standard suffixes like K, M or G)
|
|
* <baseaddr> := physical base address
|
|
* <irq> := interrupt number (as passed to request_irq())
|
|
* <id> := (optional) platform device id
|
|
* eg.:
|
|
* virtio_mmio.device=0x100@0x100b0000:48 \
|
|
* virtio_mmio.device=1K@0x1001e000:74
|
|
*
|
|
*
|
|
*
|
|
* Based on Virtio PCI driver by Anthony Liguori, copyright IBM Corp. 2007
|
|
*
|
|
* This work is licensed under the terms of the GNU GPL, version 2 or later.
|
|
* See the COPYING file in the top-level directory.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) "virtio-mmio: " fmt
|
|
|
|
#include <linux/highmem.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/list.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/virtio.h>
|
|
#include <linux/virtio_config.h>
|
|
#include <linux/virtio_mmio.h>
|
|
#include <linux/virtio_ring.h>
|
|
|
|
|
|
|
|
/* The alignment to use between consumer and producer parts of vring.
|
|
* Currently hardcoded to the page size. */
|
|
#define VIRTIO_MMIO_VRING_ALIGN PAGE_SIZE
|
|
|
|
|
|
|
|
#define to_virtio_mmio_device(_plat_dev) \
|
|
container_of(_plat_dev, struct virtio_mmio_device, vdev)
|
|
|
|
struct virtio_mmio_device {
|
|
struct virtio_device vdev;
|
|
struct platform_device *pdev;
|
|
|
|
void __iomem *base;
|
|
unsigned long version;
|
|
|
|
/* a list of queues so we can dispatch IRQs */
|
|
spinlock_t lock;
|
|
struct list_head virtqueues;
|
|
};
|
|
|
|
struct virtio_mmio_vq_info {
|
|
/* the actual virtqueue */
|
|
struct virtqueue *vq;
|
|
|
|
/* the number of entries in the queue */
|
|
unsigned int num;
|
|
|
|
/* the virtual address of the ring queue */
|
|
void *queue;
|
|
|
|
/* the list node for the virtqueues list */
|
|
struct list_head node;
|
|
};
|
|
|
|
|
|
|
|
/* Configuration interface */
|
|
|
|
static u64 vm_get_features(struct virtio_device *vdev)
|
|
{
|
|
struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
|
|
u64 features;
|
|
|
|
writel(1, vm_dev->base + VIRTIO_MMIO_DEVICE_FEATURES_SEL);
|
|
features = readl(vm_dev->base + VIRTIO_MMIO_DEVICE_FEATURES);
|
|
features <<= 32;
|
|
|
|
writel(0, vm_dev->base + VIRTIO_MMIO_DEVICE_FEATURES_SEL);
|
|
features |= readl(vm_dev->base + VIRTIO_MMIO_DEVICE_FEATURES);
|
|
|
|
return features;
|
|
}
|
|
|
|
static int vm_finalize_features(struct virtio_device *vdev)
|
|
{
|
|
struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
|
|
|
|
/* Give virtio_ring a chance to accept features. */
|
|
vring_transport_features(vdev);
|
|
|
|
/* Make sure there is are no mixed devices */
|
|
if (vm_dev->version == 2 &&
|
|
!__virtio_test_bit(vdev, VIRTIO_F_VERSION_1)) {
|
|
dev_err(&vdev->dev, "New virtio-mmio devices (version 2) must provide VIRTIO_F_VERSION_1 feature!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
writel(1, vm_dev->base + VIRTIO_MMIO_DRIVER_FEATURES_SEL);
|
|
writel((u32)(vdev->features >> 32),
|
|
vm_dev->base + VIRTIO_MMIO_DRIVER_FEATURES);
|
|
|
|
writel(0, vm_dev->base + VIRTIO_MMIO_DRIVER_FEATURES_SEL);
|
|
writel((u32)vdev->features,
|
|
vm_dev->base + VIRTIO_MMIO_DRIVER_FEATURES);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void vm_get(struct virtio_device *vdev, unsigned offset,
|
|
void *buf, unsigned len)
|
|
{
|
|
struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
|
|
void __iomem *base = vm_dev->base + VIRTIO_MMIO_CONFIG;
|
|
u8 b;
|
|
__le16 w;
|
|
__le32 l;
|
|
|
|
if (vm_dev->version == 1) {
|
|
u8 *ptr = buf;
|
|
int i;
|
|
|
|
for (i = 0; i < len; i++)
|
|
ptr[i] = readb(base + offset + i);
|
|
return;
|
|
}
|
|
|
|
switch (len) {
|
|
case 1:
|
|
b = readb(base + offset);
|
|
memcpy(buf, &b, sizeof b);
|
|
break;
|
|
case 2:
|
|
w = cpu_to_le16(readw(base + offset));
|
|
memcpy(buf, &w, sizeof w);
|
|
break;
|
|
case 4:
|
|
l = cpu_to_le32(readl(base + offset));
|
|
memcpy(buf, &l, sizeof l);
|
|
break;
|
|
case 8:
|
|
l = cpu_to_le32(readl(base + offset));
|
|
memcpy(buf, &l, sizeof l);
|
|
l = cpu_to_le32(ioread32(base + offset + sizeof l));
|
|
memcpy(buf + sizeof l, &l, sizeof l);
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
static void vm_set(struct virtio_device *vdev, unsigned offset,
|
|
const void *buf, unsigned len)
|
|
{
|
|
struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
|
|
void __iomem *base = vm_dev->base + VIRTIO_MMIO_CONFIG;
|
|
u8 b;
|
|
__le16 w;
|
|
__le32 l;
|
|
|
|
if (vm_dev->version == 1) {
|
|
const u8 *ptr = buf;
|
|
int i;
|
|
|
|
for (i = 0; i < len; i++)
|
|
writeb(ptr[i], base + offset + i);
|
|
|
|
return;
|
|
}
|
|
|
|
switch (len) {
|
|
case 1:
|
|
memcpy(&b, buf, sizeof b);
|
|
writeb(b, base + offset);
|
|
break;
|
|
case 2:
|
|
memcpy(&w, buf, sizeof w);
|
|
writew(le16_to_cpu(w), base + offset);
|
|
break;
|
|
case 4:
|
|
memcpy(&l, buf, sizeof l);
|
|
writel(le32_to_cpu(l), base + offset);
|
|
break;
|
|
case 8:
|
|
memcpy(&l, buf, sizeof l);
|
|
writel(le32_to_cpu(l), base + offset);
|
|
memcpy(&l, buf + sizeof l, sizeof l);
|
|
writel(le32_to_cpu(l), base + offset + sizeof l);
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
static u32 vm_generation(struct virtio_device *vdev)
|
|
{
|
|
struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
|
|
|
|
if (vm_dev->version == 1)
|
|
return 0;
|
|
else
|
|
return readl(vm_dev->base + VIRTIO_MMIO_CONFIG_GENERATION);
|
|
}
|
|
|
|
static u8 vm_get_status(struct virtio_device *vdev)
|
|
{
|
|
struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
|
|
|
|
return readl(vm_dev->base + VIRTIO_MMIO_STATUS) & 0xff;
|
|
}
|
|
|
|
static void vm_set_status(struct virtio_device *vdev, u8 status)
|
|
{
|
|
struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
|
|
|
|
/* We should never be setting status to 0. */
|
|
BUG_ON(status == 0);
|
|
|
|
writel(status, vm_dev->base + VIRTIO_MMIO_STATUS);
|
|
}
|
|
|
|
static void vm_reset(struct virtio_device *vdev)
|
|
{
|
|
struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
|
|
|
|
/* 0 status means a reset. */
|
|
writel(0, vm_dev->base + VIRTIO_MMIO_STATUS);
|
|
}
|
|
|
|
|
|
|
|
/* Transport interface */
|
|
|
|
/* the notify function used when creating a virt queue */
|
|
static bool vm_notify(struct virtqueue *vq)
|
|
{
|
|
struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vq->vdev);
|
|
|
|
/* We write the queue's selector into the notification register to
|
|
* signal the other end */
|
|
writel(vq->index, vm_dev->base + VIRTIO_MMIO_QUEUE_NOTIFY);
|
|
return true;
|
|
}
|
|
|
|
/* Notify all virtqueues on an interrupt. */
|
|
static irqreturn_t vm_interrupt(int irq, void *opaque)
|
|
{
|
|
struct virtio_mmio_device *vm_dev = opaque;
|
|
struct virtio_mmio_vq_info *info;
|
|
unsigned long status;
|
|
unsigned long flags;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
|
|
/* Read and acknowledge interrupts */
|
|
status = readl(vm_dev->base + VIRTIO_MMIO_INTERRUPT_STATUS);
|
|
writel(status, vm_dev->base + VIRTIO_MMIO_INTERRUPT_ACK);
|
|
|
|
if (unlikely(status & VIRTIO_MMIO_INT_CONFIG)) {
|
|
virtio_config_changed(&vm_dev->vdev);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
if (likely(status & VIRTIO_MMIO_INT_VRING)) {
|
|
spin_lock_irqsave(&vm_dev->lock, flags);
|
|
list_for_each_entry(info, &vm_dev->virtqueues, node)
|
|
ret |= vring_interrupt(irq, info->vq);
|
|
spin_unlock_irqrestore(&vm_dev->lock, flags);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
|
|
static void vm_del_vq(struct virtqueue *vq)
|
|
{
|
|
struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vq->vdev);
|
|
struct virtio_mmio_vq_info *info = vq->priv;
|
|
unsigned long flags, size;
|
|
unsigned int index = vq->index;
|
|
|
|
spin_lock_irqsave(&vm_dev->lock, flags);
|
|
list_del(&info->node);
|
|
spin_unlock_irqrestore(&vm_dev->lock, flags);
|
|
|
|
vring_del_virtqueue(vq);
|
|
|
|
/* Select and deactivate the queue */
|
|
writel(index, vm_dev->base + VIRTIO_MMIO_QUEUE_SEL);
|
|
if (vm_dev->version == 1) {
|
|
writel(0, vm_dev->base + VIRTIO_MMIO_QUEUE_PFN);
|
|
} else {
|
|
writel(0, vm_dev->base + VIRTIO_MMIO_QUEUE_READY);
|
|
WARN_ON(readl(vm_dev->base + VIRTIO_MMIO_QUEUE_READY));
|
|
}
|
|
|
|
size = PAGE_ALIGN(vring_size(info->num, VIRTIO_MMIO_VRING_ALIGN));
|
|
free_pages_exact(info->queue, size);
|
|
kfree(info);
|
|
}
|
|
|
|
static void vm_del_vqs(struct virtio_device *vdev)
|
|
{
|
|
struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
|
|
struct virtqueue *vq, *n;
|
|
|
|
list_for_each_entry_safe(vq, n, &vdev->vqs, list)
|
|
vm_del_vq(vq);
|
|
|
|
free_irq(platform_get_irq(vm_dev->pdev, 0), vm_dev);
|
|
}
|
|
|
|
|
|
|
|
static struct virtqueue *vm_setup_vq(struct virtio_device *vdev, unsigned index,
|
|
void (*callback)(struct virtqueue *vq),
|
|
const char *name)
|
|
{
|
|
struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
|
|
struct virtio_mmio_vq_info *info;
|
|
struct virtqueue *vq;
|
|
unsigned long flags, size;
|
|
int err;
|
|
|
|
if (!name)
|
|
return NULL;
|
|
|
|
/* Select the queue we're interested in */
|
|
writel(index, vm_dev->base + VIRTIO_MMIO_QUEUE_SEL);
|
|
|
|
/* Queue shouldn't already be set up. */
|
|
if (readl(vm_dev->base + (vm_dev->version == 1 ?
|
|
VIRTIO_MMIO_QUEUE_PFN : VIRTIO_MMIO_QUEUE_READY))) {
|
|
err = -ENOENT;
|
|
goto error_available;
|
|
}
|
|
|
|
/* Allocate and fill out our active queue description */
|
|
info = kmalloc(sizeof(*info), GFP_KERNEL);
|
|
if (!info) {
|
|
err = -ENOMEM;
|
|
goto error_kmalloc;
|
|
}
|
|
|
|
/* Allocate pages for the queue - start with a queue as big as
|
|
* possible (limited by maximum size allowed by device), drop down
|
|
* to a minimal size, just big enough to fit descriptor table
|
|
* and two rings (which makes it "alignment_size * 2")
|
|
*/
|
|
info->num = readl(vm_dev->base + VIRTIO_MMIO_QUEUE_NUM_MAX);
|
|
|
|
/* If the device reports a 0 entry queue, we won't be able to
|
|
* use it to perform I/O, and vring_new_virtqueue() can't create
|
|
* empty queues anyway, so don't bother to set up the device.
|
|
*/
|
|
if (info->num == 0) {
|
|
err = -ENOENT;
|
|
goto error_alloc_pages;
|
|
}
|
|
|
|
while (1) {
|
|
size = PAGE_ALIGN(vring_size(info->num,
|
|
VIRTIO_MMIO_VRING_ALIGN));
|
|
/* Did the last iter shrink the queue below minimum size? */
|
|
if (size < VIRTIO_MMIO_VRING_ALIGN * 2) {
|
|
err = -ENOMEM;
|
|
goto error_alloc_pages;
|
|
}
|
|
|
|
info->queue = alloc_pages_exact(size, GFP_KERNEL | __GFP_ZERO);
|
|
if (info->queue)
|
|
break;
|
|
|
|
info->num /= 2;
|
|
}
|
|
|
|
/* Create the vring */
|
|
vq = vring_new_virtqueue(index, info->num, VIRTIO_MMIO_VRING_ALIGN, vdev,
|
|
true, info->queue, vm_notify, callback, name);
|
|
if (!vq) {
|
|
err = -ENOMEM;
|
|
goto error_new_virtqueue;
|
|
}
|
|
|
|
/* Activate the queue */
|
|
writel(info->num, vm_dev->base + VIRTIO_MMIO_QUEUE_NUM);
|
|
if (vm_dev->version == 1) {
|
|
writel(PAGE_SIZE, vm_dev->base + VIRTIO_MMIO_QUEUE_ALIGN);
|
|
writel(virt_to_phys(info->queue) >> PAGE_SHIFT,
|
|
vm_dev->base + VIRTIO_MMIO_QUEUE_PFN);
|
|
} else {
|
|
u64 addr;
|
|
|
|
addr = virt_to_phys(info->queue);
|
|
writel((u32)addr, vm_dev->base + VIRTIO_MMIO_QUEUE_DESC_LOW);
|
|
writel((u32)(addr >> 32),
|
|
vm_dev->base + VIRTIO_MMIO_QUEUE_DESC_HIGH);
|
|
|
|
addr = virt_to_phys(virtqueue_get_avail(vq));
|
|
writel((u32)addr, vm_dev->base + VIRTIO_MMIO_QUEUE_AVAIL_LOW);
|
|
writel((u32)(addr >> 32),
|
|
vm_dev->base + VIRTIO_MMIO_QUEUE_AVAIL_HIGH);
|
|
|
|
addr = virt_to_phys(virtqueue_get_used(vq));
|
|
writel((u32)addr, vm_dev->base + VIRTIO_MMIO_QUEUE_USED_LOW);
|
|
writel((u32)(addr >> 32),
|
|
vm_dev->base + VIRTIO_MMIO_QUEUE_USED_HIGH);
|
|
|
|
writel(1, vm_dev->base + VIRTIO_MMIO_QUEUE_READY);
|
|
}
|
|
|
|
vq->priv = info;
|
|
info->vq = vq;
|
|
|
|
spin_lock_irqsave(&vm_dev->lock, flags);
|
|
list_add(&info->node, &vm_dev->virtqueues);
|
|
spin_unlock_irqrestore(&vm_dev->lock, flags);
|
|
|
|
return vq;
|
|
|
|
error_new_virtqueue:
|
|
if (vm_dev->version == 1) {
|
|
writel(0, vm_dev->base + VIRTIO_MMIO_QUEUE_PFN);
|
|
} else {
|
|
writel(0, vm_dev->base + VIRTIO_MMIO_QUEUE_READY);
|
|
WARN_ON(readl(vm_dev->base + VIRTIO_MMIO_QUEUE_READY));
|
|
}
|
|
free_pages_exact(info->queue, size);
|
|
error_alloc_pages:
|
|
kfree(info);
|
|
error_kmalloc:
|
|
error_available:
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
static int vm_find_vqs(struct virtio_device *vdev, unsigned nvqs,
|
|
struct virtqueue *vqs[],
|
|
vq_callback_t *callbacks[],
|
|
const char *names[])
|
|
{
|
|
struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
|
|
unsigned int irq = platform_get_irq(vm_dev->pdev, 0);
|
|
int i, err;
|
|
|
|
err = request_irq(irq, vm_interrupt, IRQF_SHARED,
|
|
dev_name(&vdev->dev), vm_dev);
|
|
if (err)
|
|
return err;
|
|
|
|
for (i = 0; i < nvqs; ++i) {
|
|
vqs[i] = vm_setup_vq(vdev, i, callbacks[i], names[i]);
|
|
if (IS_ERR(vqs[i])) {
|
|
vm_del_vqs(vdev);
|
|
return PTR_ERR(vqs[i]);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const char *vm_bus_name(struct virtio_device *vdev)
|
|
{
|
|
struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
|
|
|
|
return vm_dev->pdev->name;
|
|
}
|
|
|
|
static const struct virtio_config_ops virtio_mmio_config_ops = {
|
|
.get = vm_get,
|
|
.set = vm_set,
|
|
.generation = vm_generation,
|
|
.get_status = vm_get_status,
|
|
.set_status = vm_set_status,
|
|
.reset = vm_reset,
|
|
.find_vqs = vm_find_vqs,
|
|
.del_vqs = vm_del_vqs,
|
|
.get_features = vm_get_features,
|
|
.finalize_features = vm_finalize_features,
|
|
.bus_name = vm_bus_name,
|
|
};
|
|
|
|
|
|
|
|
/* Platform device */
|
|
|
|
static int virtio_mmio_probe(struct platform_device *pdev)
|
|
{
|
|
struct virtio_mmio_device *vm_dev;
|
|
struct resource *mem;
|
|
unsigned long magic;
|
|
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!mem)
|
|
return -EINVAL;
|
|
|
|
if (!devm_request_mem_region(&pdev->dev, mem->start,
|
|
resource_size(mem), pdev->name))
|
|
return -EBUSY;
|
|
|
|
vm_dev = devm_kzalloc(&pdev->dev, sizeof(*vm_dev), GFP_KERNEL);
|
|
if (!vm_dev)
|
|
return -ENOMEM;
|
|
|
|
vm_dev->vdev.dev.parent = &pdev->dev;
|
|
vm_dev->vdev.config = &virtio_mmio_config_ops;
|
|
vm_dev->pdev = pdev;
|
|
INIT_LIST_HEAD(&vm_dev->virtqueues);
|
|
spin_lock_init(&vm_dev->lock);
|
|
|
|
vm_dev->base = devm_ioremap(&pdev->dev, mem->start, resource_size(mem));
|
|
if (vm_dev->base == NULL)
|
|
return -EFAULT;
|
|
|
|
/* Check magic value */
|
|
magic = readl(vm_dev->base + VIRTIO_MMIO_MAGIC_VALUE);
|
|
if (magic != ('v' | 'i' << 8 | 'r' << 16 | 't' << 24)) {
|
|
dev_warn(&pdev->dev, "Wrong magic value 0x%08lx!\n", magic);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Check device version */
|
|
vm_dev->version = readl(vm_dev->base + VIRTIO_MMIO_VERSION);
|
|
if (vm_dev->version < 1 || vm_dev->version > 2) {
|
|
dev_err(&pdev->dev, "Version %ld not supported!\n",
|
|
vm_dev->version);
|
|
return -ENXIO;
|
|
}
|
|
|
|
vm_dev->vdev.id.device = readl(vm_dev->base + VIRTIO_MMIO_DEVICE_ID);
|
|
if (vm_dev->vdev.id.device == 0) {
|
|
/*
|
|
* virtio-mmio device with an ID 0 is a (dummy) placeholder
|
|
* with no function. End probing now with no error reported.
|
|
*/
|
|
return -ENODEV;
|
|
}
|
|
vm_dev->vdev.id.vendor = readl(vm_dev->base + VIRTIO_MMIO_VENDOR_ID);
|
|
|
|
/* Reject legacy-only IDs for version 2 devices */
|
|
if (vm_dev->version == 2 &&
|
|
virtio_device_is_legacy_only(vm_dev->vdev.id)) {
|
|
dev_err(&pdev->dev, "Version 2 not supported for devices %u!\n",
|
|
vm_dev->vdev.id.device);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (vm_dev->version == 1)
|
|
writel(PAGE_SIZE, vm_dev->base + VIRTIO_MMIO_GUEST_PAGE_SIZE);
|
|
|
|
platform_set_drvdata(pdev, vm_dev);
|
|
|
|
return register_virtio_device(&vm_dev->vdev);
|
|
}
|
|
|
|
static int virtio_mmio_remove(struct platform_device *pdev)
|
|
{
|
|
struct virtio_mmio_device *vm_dev = platform_get_drvdata(pdev);
|
|
|
|
unregister_virtio_device(&vm_dev->vdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
|
|
/* Devices list parameter */
|
|
|
|
#if defined(CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES)
|
|
|
|
static struct device vm_cmdline_parent = {
|
|
.init_name = "virtio-mmio-cmdline",
|
|
};
|
|
|
|
static int vm_cmdline_parent_registered;
|
|
static int vm_cmdline_id;
|
|
|
|
static int vm_cmdline_set(const char *device,
|
|
const struct kernel_param *kp)
|
|
{
|
|
int err;
|
|
struct resource resources[2] = {};
|
|
char *str;
|
|
long long int base, size;
|
|
unsigned int irq;
|
|
int processed, consumed = 0;
|
|
struct platform_device *pdev;
|
|
|
|
/* Consume "size" part of the command line parameter */
|
|
size = memparse(device, &str);
|
|
|
|
/* Get "@<base>:<irq>[:<id>]" chunks */
|
|
processed = sscanf(str, "@%lli:%u%n:%d%n",
|
|
&base, &irq, &consumed,
|
|
&vm_cmdline_id, &consumed);
|
|
|
|
/*
|
|
* sscanf() must processes at least 2 chunks; also there
|
|
* must be no extra characters after the last chunk, so
|
|
* str[consumed] must be '\0'
|
|
*/
|
|
if (processed < 2 || str[consumed])
|
|
return -EINVAL;
|
|
|
|
resources[0].flags = IORESOURCE_MEM;
|
|
resources[0].start = base;
|
|
resources[0].end = base + size - 1;
|
|
|
|
resources[1].flags = IORESOURCE_IRQ;
|
|
resources[1].start = resources[1].end = irq;
|
|
|
|
if (!vm_cmdline_parent_registered) {
|
|
err = device_register(&vm_cmdline_parent);
|
|
if (err) {
|
|
pr_err("Failed to register parent device!\n");
|
|
return err;
|
|
}
|
|
vm_cmdline_parent_registered = 1;
|
|
}
|
|
|
|
pr_info("Registering device virtio-mmio.%d at 0x%llx-0x%llx, IRQ %d.\n",
|
|
vm_cmdline_id,
|
|
(unsigned long long)resources[0].start,
|
|
(unsigned long long)resources[0].end,
|
|
(int)resources[1].start);
|
|
|
|
pdev = platform_device_register_resndata(&vm_cmdline_parent,
|
|
"virtio-mmio", vm_cmdline_id++,
|
|
resources, ARRAY_SIZE(resources), NULL, 0);
|
|
if (IS_ERR(pdev))
|
|
return PTR_ERR(pdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vm_cmdline_get_device(struct device *dev, void *data)
|
|
{
|
|
char *buffer = data;
|
|
unsigned int len = strlen(buffer);
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
|
|
snprintf(buffer + len, PAGE_SIZE - len, "0x%llx@0x%llx:%llu:%d\n",
|
|
pdev->resource[0].end - pdev->resource[0].start + 1ULL,
|
|
(unsigned long long)pdev->resource[0].start,
|
|
(unsigned long long)pdev->resource[1].start,
|
|
pdev->id);
|
|
return 0;
|
|
}
|
|
|
|
static int vm_cmdline_get(char *buffer, const struct kernel_param *kp)
|
|
{
|
|
buffer[0] = '\0';
|
|
device_for_each_child(&vm_cmdline_parent, buffer,
|
|
vm_cmdline_get_device);
|
|
return strlen(buffer) + 1;
|
|
}
|
|
|
|
static struct kernel_param_ops vm_cmdline_param_ops = {
|
|
.set = vm_cmdline_set,
|
|
.get = vm_cmdline_get,
|
|
};
|
|
|
|
device_param_cb(device, &vm_cmdline_param_ops, NULL, S_IRUSR);
|
|
|
|
static int vm_unregister_cmdline_device(struct device *dev,
|
|
void *data)
|
|
{
|
|
platform_device_unregister(to_platform_device(dev));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void vm_unregister_cmdline_devices(void)
|
|
{
|
|
if (vm_cmdline_parent_registered) {
|
|
device_for_each_child(&vm_cmdline_parent, NULL,
|
|
vm_unregister_cmdline_device);
|
|
device_unregister(&vm_cmdline_parent);
|
|
vm_cmdline_parent_registered = 0;
|
|
}
|
|
}
|
|
|
|
#else
|
|
|
|
static void vm_unregister_cmdline_devices(void)
|
|
{
|
|
}
|
|
|
|
#endif
|
|
|
|
/* Platform driver */
|
|
|
|
static struct of_device_id virtio_mmio_match[] = {
|
|
{ .compatible = "virtio,mmio", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, virtio_mmio_match);
|
|
|
|
static struct platform_driver virtio_mmio_driver = {
|
|
.probe = virtio_mmio_probe,
|
|
.remove = virtio_mmio_remove,
|
|
.driver = {
|
|
.name = "virtio-mmio",
|
|
.of_match_table = virtio_mmio_match,
|
|
},
|
|
};
|
|
|
|
static int __init virtio_mmio_init(void)
|
|
{
|
|
return platform_driver_register(&virtio_mmio_driver);
|
|
}
|
|
|
|
static void __exit virtio_mmio_exit(void)
|
|
{
|
|
platform_driver_unregister(&virtio_mmio_driver);
|
|
vm_unregister_cmdline_devices();
|
|
}
|
|
|
|
module_init(virtio_mmio_init);
|
|
module_exit(virtio_mmio_exit);
|
|
|
|
MODULE_AUTHOR("Pawel Moll <pawel.moll@arm.com>");
|
|
MODULE_DESCRIPTION("Platform bus driver for memory mapped virtio devices");
|
|
MODULE_LICENSE("GPL");
|