25985edced
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
720 lines
24 KiB
C
720 lines
24 KiB
C
#ifndef __LINUX_IXJUSER_H
|
|
#define __LINUX_IXJUSER_H
|
|
|
|
/******************************************************************************
|
|
*
|
|
* ixjuser.h
|
|
*
|
|
* Device Driver for Quicknet Technologies, Inc.'s Telephony cards
|
|
* including the Internet PhoneJACK, Internet PhoneJACK Lite,
|
|
* Internet PhoneJACK PCI, Internet LineJACK, Internet PhoneCARD and
|
|
* SmartCABLE
|
|
*
|
|
* (c) Copyright 1999-2001 Quicknet Technologies, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*
|
|
* Author: Ed Okerson, <eokerson@quicknet.net>
|
|
*
|
|
* Contributors: Greg Herlein, <gherlein@quicknet.net>
|
|
* David W. Erhart, <derhart@quicknet.net>
|
|
* John Sellers, <jsellers@quicknet.net>
|
|
* Mike Preston, <mpreston@quicknet.net>
|
|
*
|
|
* More information about the hardware related to this driver can be found
|
|
* at our website: http://www.quicknet.net
|
|
*
|
|
* Fixes:
|
|
*
|
|
* IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR
|
|
* DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
|
|
* OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF QUICKNET
|
|
* TECHNOLOGIES, INC.HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* QUICKNET TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES,
|
|
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
|
|
* AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
|
|
* ON AN "AS IS" BASIS, AND QUICKNET TECHNOLOGIES, INC. HAS NO OBLIGATION
|
|
* TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
|
|
*
|
|
*****************************************************************************/
|
|
|
|
#include <linux/telephony.h>
|
|
|
|
|
|
/******************************************************************************
|
|
*
|
|
* IOCTL's used for the Quicknet Telephony Cards
|
|
*
|
|
* If you use the IXJCTL_TESTRAM command, the card must be power cycled to
|
|
* reset the SRAM values before further use.
|
|
*
|
|
******************************************************************************/
|
|
|
|
#define IXJCTL_DSP_RESET _IO ('q', 0xC0)
|
|
|
|
#define IXJCTL_RING PHONE_RING
|
|
#define IXJCTL_HOOKSTATE PHONE_HOOKSTATE
|
|
#define IXJCTL_MAXRINGS PHONE_MAXRINGS
|
|
#define IXJCTL_RING_CADENCE PHONE_RING_CADENCE
|
|
#define IXJCTL_RING_START PHONE_RING_START
|
|
#define IXJCTL_RING_STOP PHONE_RING_STOP
|
|
|
|
#define IXJCTL_CARDTYPE _IOR ('q', 0xC1, int)
|
|
#define IXJCTL_SERIAL _IOR ('q', 0xC2, int)
|
|
#define IXJCTL_DSP_TYPE _IOR ('q', 0xC3, int)
|
|
#define IXJCTL_DSP_VERSION _IOR ('q', 0xC4, int)
|
|
#define IXJCTL_VERSION _IOR ('q', 0xDA, char *)
|
|
#define IXJCTL_DSP_IDLE _IO ('q', 0xC5)
|
|
#define IXJCTL_TESTRAM _IO ('q', 0xC6)
|
|
|
|
/******************************************************************************
|
|
*
|
|
* This group of IOCTLs deal with the record settings of the DSP
|
|
*
|
|
* The IXJCTL_REC_DEPTH command sets the internal buffer depth of the DSP.
|
|
* Setting a lower depth reduces latency, but increases the demand of the
|
|
* application to service the driver without frame loss. The DSP has 480
|
|
* bytes of physical buffer memory for the record channel so the true
|
|
* maximum limit is determined by how many frames will fit in the buffer.
|
|
*
|
|
* 1 uncompressed (480 byte) 16-bit linear frame.
|
|
* 2 uncompressed (240 byte) 8-bit A-law/mu-law frames.
|
|
* 15 TrueSpeech 8.5 frames.
|
|
* 20 TrueSpeech 6.3,5.3,4.8 or 4.1 frames.
|
|
*
|
|
* The default in the driver is currently set to 2 frames.
|
|
*
|
|
* The IXJCTL_REC_VOLUME and IXJCTL_PLAY_VOLUME commands both use a Q8
|
|
* number as a parameter, 0x100 scales the signal by 1.0, 0x200 scales the
|
|
* signal by 2.0, 0x80 scales the signal by 0.5. No protection is given
|
|
* against over-scaling, if the multiplication factor times the input
|
|
* signal exceeds 16 bits, overflow distortion will occur. The default
|
|
* setting is 0x100 (1.0).
|
|
*
|
|
* The IXJCTL_REC_LEVEL returns the average signal level (not r.m.s.) on
|
|
* the most recently recorded frame as a 16 bit value.
|
|
******************************************************************************/
|
|
|
|
#define IXJCTL_REC_CODEC PHONE_REC_CODEC
|
|
#define IXJCTL_REC_START PHONE_REC_START
|
|
#define IXJCTL_REC_STOP PHONE_REC_STOP
|
|
#define IXJCTL_REC_DEPTH PHONE_REC_DEPTH
|
|
#define IXJCTL_FRAME PHONE_FRAME
|
|
#define IXJCTL_REC_VOLUME PHONE_REC_VOLUME
|
|
#define IXJCTL_REC_LEVEL PHONE_REC_LEVEL
|
|
|
|
typedef enum {
|
|
f300_640 = 4, f300_500, f1100, f350, f400, f480, f440, f620, f20_50,
|
|
f133_200, f300, f300_420, f330, f300_425, f330_440, f340, f350_400,
|
|
f350_440, f350_450, f360, f380_420, f392, f400_425, f400_440, f400_450,
|
|
f420, f425, f425_450, f425_475, f435, f440_450, f440_480, f445, f450,
|
|
f452, f475, f480_620, f494, f500, f520, f523, f525, f540_660, f587,
|
|
f590, f600, f660, f700, f740, f750, f750_1450, f770, f800, f816, f850,
|
|
f857_1645, f900, f900_1300, f935_1215, f941_1477, f942, f950, f950_1400,
|
|
f975, f1000, f1020, f1050, f1100_1750, f1140, f1200, f1209, f1330, f1336,
|
|
lf1366, f1380, f1400, f1477, f1600, f1633_1638, f1800, f1860
|
|
} IXJ_FILTER_FREQ;
|
|
|
|
typedef struct {
|
|
unsigned int filter;
|
|
IXJ_FILTER_FREQ freq;
|
|
char enable;
|
|
} IXJ_FILTER;
|
|
|
|
typedef struct {
|
|
char enable;
|
|
char en_filter;
|
|
unsigned int filter;
|
|
unsigned int on1;
|
|
unsigned int off1;
|
|
unsigned int on2;
|
|
unsigned int off2;
|
|
unsigned int on3;
|
|
unsigned int off3;
|
|
} IXJ_FILTER_CADENCE;
|
|
|
|
#define IXJCTL_SET_FILTER _IOW ('q', 0xC7, IXJ_FILTER *)
|
|
#define IXJCTL_SET_FILTER_RAW _IOW ('q', 0xDD, IXJ_FILTER_RAW *)
|
|
#define IXJCTL_GET_FILTER_HIST _IOW ('q', 0xC8, int)
|
|
#define IXJCTL_FILTER_CADENCE _IOW ('q', 0xD6, IXJ_FILTER_CADENCE *)
|
|
#define IXJCTL_PLAY_CID _IO ('q', 0xD7)
|
|
/******************************************************************************
|
|
*
|
|
* This IOCTL allows you to reassign values in the tone index table. The
|
|
* tone table has 32 entries (0 - 31), but the driver only allows entries
|
|
* 13 - 27 to be modified, entry 0 is reserved for silence and 1 - 12 are
|
|
* the standard DTMF digits and 28 - 31 are the DTMF tones for A, B, C & D.
|
|
* The positions used internally for Call Progress Tones are as follows:
|
|
* Dial Tone - 25
|
|
* Ring Back - 26
|
|
* Busy Signal - 27
|
|
*
|
|
* The freq values are calculated as:
|
|
* freq = cos(2 * PI * frequency / 8000)
|
|
*
|
|
* The most commonly needed values are already calculated and listed in the
|
|
* enum IXJ_TONE_FREQ. Each tone index can have two frequencies with
|
|
* different gains, if you are only using a single frequency set the unused
|
|
* one to 0.
|
|
*
|
|
* The gain values range from 0 to 15 indicating +6dB to -24dB in 2dB
|
|
* increments.
|
|
*
|
|
******************************************************************************/
|
|
|
|
typedef enum {
|
|
hz20 = 0x7ffa,
|
|
hz50 = 0x7fe5,
|
|
hz133 = 0x7f4c,
|
|
hz200 = 0x7e6b,
|
|
hz261 = 0x7d50, /* .63 C1 */
|
|
hz277 = 0x7cfa, /* .18 CS1 */
|
|
hz293 = 0x7c9f, /* .66 D1 */
|
|
hz300 = 0x7c75,
|
|
hz311 = 0x7c32, /* .13 DS1 */
|
|
hz329 = 0x7bbf, /* .63 E1 */
|
|
hz330 = 0x7bb8,
|
|
hz340 = 0x7b75,
|
|
hz349 = 0x7b37, /* .23 F1 */
|
|
hz350 = 0x7b30,
|
|
hz360 = 0x7ae9,
|
|
hz369 = 0x7aa8, /* .99 FS1 */
|
|
hz380 = 0x7a56,
|
|
hz392 = 0x79fa, /* .00 G1 */
|
|
hz400 = 0x79bb,
|
|
hz415 = 0x7941, /* .30 GS1 */
|
|
hz420 = 0x7918,
|
|
hz425 = 0x78ee,
|
|
hz435 = 0x7899,
|
|
hz440 = 0x786d, /* .00 A1 */
|
|
hz445 = 0x7842,
|
|
hz450 = 0x7815,
|
|
hz452 = 0x7803,
|
|
hz466 = 0x7784, /* .16 AS1 */
|
|
hz475 = 0x7731,
|
|
hz480 = 0x7701,
|
|
hz493 = 0x7685, /* .88 B1 */
|
|
hz494 = 0x767b,
|
|
hz500 = 0x7640,
|
|
hz520 = 0x7578,
|
|
hz523 = 0x7559, /* .25 C2 */
|
|
hz525 = 0x7544,
|
|
hz540 = 0x74a7,
|
|
hz554 = 0x7411, /* .37 CS2 */
|
|
hz587 = 0x72a1, /* .33 D2 */
|
|
hz590 = 0x727f,
|
|
hz600 = 0x720b,
|
|
hz620 = 0x711e,
|
|
hz622 = 0x7106, /* .25 DS2 */
|
|
hz659 = 0x6f3b, /* .26 E2 */
|
|
hz660 = 0x6f2e,
|
|
hz698 = 0x6d3d, /* .46 F2 */
|
|
hz700 = 0x6d22,
|
|
hz739 = 0x6b09, /* .99 FS2 */
|
|
hz740 = 0x6afa,
|
|
hz750 = 0x6a6c,
|
|
hz770 = 0x694b,
|
|
hz783 = 0x688b, /* .99 G2 */
|
|
hz800 = 0x678d,
|
|
hz816 = 0x6698,
|
|
hz830 = 0x65bf, /* .61 GS2 */
|
|
hz850 = 0x6484,
|
|
hz857 = 0x6414,
|
|
hz880 = 0x629f, /* .00 A2 */
|
|
hz900 = 0x6154,
|
|
hz932 = 0x5f35, /* .33 AS2 */
|
|
hz935 = 0x5f01,
|
|
hz941 = 0x5e9a,
|
|
hz942 = 0x5e88,
|
|
hz950 = 0x5dfd,
|
|
hz975 = 0x5c44,
|
|
hz1000 = 0x5a81,
|
|
hz1020 = 0x5912,
|
|
hz1050 = 0x56e2,
|
|
hz1100 = 0x5320,
|
|
hz1140 = 0x5007,
|
|
hz1200 = 0x4b3b,
|
|
hz1209 = 0x4a80,
|
|
hz1215 = 0x4a02,
|
|
hz1250 = 0x471c,
|
|
hz1300 = 0x42e0,
|
|
hz1330 = 0x4049,
|
|
hz1336 = 0x3fc4,
|
|
hz1366 = 0x3d22,
|
|
hz1380 = 0x3be4,
|
|
hz1400 = 0x3a1b,
|
|
hz1450 = 0x3596,
|
|
hz1477 = 0x331c,
|
|
hz1500 = 0x30fb,
|
|
hz1600 = 0x278d,
|
|
hz1633 = 0x2462,
|
|
hz1638 = 0x23e7,
|
|
hz1645 = 0x233a,
|
|
hz1750 = 0x18f8,
|
|
hz1800 = 0x1405,
|
|
hz1860 = 0xe0b,
|
|
hz2100 = 0xf5f6,
|
|
hz2130 = 0xf2f5,
|
|
hz2450 = 0xd3b3,
|
|
hz2750 = 0xb8e4
|
|
} IXJ_FREQ;
|
|
|
|
typedef enum {
|
|
C1 = hz261,
|
|
CS1 = hz277,
|
|
D1 = hz293,
|
|
DS1 = hz311,
|
|
E1 = hz329,
|
|
F1 = hz349,
|
|
FS1 = hz369,
|
|
G1 = hz392,
|
|
GS1 = hz415,
|
|
A1 = hz440,
|
|
AS1 = hz466,
|
|
B1 = hz493,
|
|
C2 = hz523,
|
|
CS2 = hz554,
|
|
D2 = hz587,
|
|
DS2 = hz622,
|
|
E2 = hz659,
|
|
F2 = hz698,
|
|
FS2 = hz739,
|
|
G2 = hz783,
|
|
GS2 = hz830,
|
|
A2 = hz880,
|
|
AS2 = hz932,
|
|
} IXJ_NOTE;
|
|
|
|
typedef struct {
|
|
int tone_index;
|
|
int freq0;
|
|
int gain0;
|
|
int freq1;
|
|
int gain1;
|
|
} IXJ_TONE;
|
|
|
|
#define IXJCTL_INIT_TONE _IOW ('q', 0xC9, IXJ_TONE *)
|
|
|
|
/******************************************************************************
|
|
*
|
|
* The IXJCTL_TONE_CADENCE ioctl defines tone sequences used for various
|
|
* Call Progress Tones (CPT). This is accomplished by setting up an array of
|
|
* IXJ_CADENCE_ELEMENT structures that sequentially define the states of
|
|
* the tone sequence. The tone_on_time and tone_off time are in
|
|
* 250 microsecond intervals. A pointer to this array is passed to the
|
|
* driver as the ce element of an IXJ_CADENCE structure. The elements_used
|
|
* must be set to the number of IXJ_CADENCE_ELEMENTS in the array. The
|
|
* termination variable defines what to do at the end of a cadence, the
|
|
* options are to play the cadence once and stop, to repeat the last
|
|
* element of the cadence indefinitely, or to repeat the entire cadence
|
|
* indefinitely. The ce variable is a pointer to the array of IXJ_TONE
|
|
* structures. If the freq0 variable is non-zero, the tone table contents
|
|
* for the tone_index are updated to the frequencies and gains defined. It
|
|
* should be noted that DTMF tones cannot be reassigned, so if DTMF tone
|
|
* table indexes are used in a cadence the frequency and gain variables will
|
|
* be ignored.
|
|
*
|
|
* If the array elements contain frequency parameters the driver will
|
|
* initialize the needed tone table elements and begin playing the tone,
|
|
* there is no preset limit on the number of elements in the cadence. If
|
|
* there is more than one frequency used in the cadence, sequential elements
|
|
* of different frequencies MUST use different tone table indexes. Only one
|
|
* cadence can be played at a time. It is possible to build complex
|
|
* cadences with multiple frequencies using 2 tone table indexes by
|
|
* alternating between them.
|
|
*
|
|
******************************************************************************/
|
|
|
|
typedef struct {
|
|
int index;
|
|
int tone_on_time;
|
|
int tone_off_time;
|
|
int freq0;
|
|
int gain0;
|
|
int freq1;
|
|
int gain1;
|
|
} IXJ_CADENCE_ELEMENT;
|
|
|
|
typedef enum {
|
|
PLAY_ONCE,
|
|
REPEAT_LAST_ELEMENT,
|
|
REPEAT_ALL
|
|
} IXJ_CADENCE_TERM;
|
|
|
|
typedef struct {
|
|
int elements_used;
|
|
IXJ_CADENCE_TERM termination;
|
|
IXJ_CADENCE_ELEMENT __user *ce;
|
|
} IXJ_CADENCE;
|
|
|
|
#define IXJCTL_TONE_CADENCE _IOW ('q', 0xCA, IXJ_CADENCE *)
|
|
/******************************************************************************
|
|
*
|
|
* This group of IOCTLs deal with the playback settings of the DSP
|
|
*
|
|
******************************************************************************/
|
|
|
|
#define IXJCTL_PLAY_CODEC PHONE_PLAY_CODEC
|
|
#define IXJCTL_PLAY_START PHONE_PLAY_START
|
|
#define IXJCTL_PLAY_STOP PHONE_PLAY_STOP
|
|
#define IXJCTL_PLAY_DEPTH PHONE_PLAY_DEPTH
|
|
#define IXJCTL_PLAY_VOLUME PHONE_PLAY_VOLUME
|
|
#define IXJCTL_PLAY_LEVEL PHONE_PLAY_LEVEL
|
|
|
|
/******************************************************************************
|
|
*
|
|
* This group of IOCTLs deal with the Acoustic Echo Cancellation settings
|
|
* of the DSP
|
|
*
|
|
* Issuing the IXJCTL_AEC_START command with a value of AEC_OFF has the
|
|
* same effect as IXJCTL_AEC_STOP. This is to simplify slider bar
|
|
* controls. IXJCTL_AEC_GET_LEVEL returns the current setting of the AEC.
|
|
******************************************************************************/
|
|
#define IXJCTL_AEC_START _IOW ('q', 0xCB, int)
|
|
#define IXJCTL_AEC_STOP _IO ('q', 0xCC)
|
|
#define IXJCTL_AEC_GET_LEVEL _IO ('q', 0xCD)
|
|
|
|
#define AEC_OFF 0
|
|
#define AEC_LOW 1
|
|
#define AEC_MED 2
|
|
#define AEC_HIGH 3
|
|
#define AEC_AUTO 4
|
|
#define AEC_AGC 5
|
|
/******************************************************************************
|
|
*
|
|
* Call Progress Tones, DTMF, etc.
|
|
* IXJCTL_DTMF_OOB determines if DTMF signaling is sent as Out-Of-Band
|
|
* only. If you pass a 1, DTMF is suppressed from the audio stream.
|
|
* Tone on and off times are in 250 microsecond intervals so
|
|
* ioctl(ixj1, IXJCTL_SET_TONE_ON_TIME, 360);
|
|
* will set the tone on time of board ixj1 to 360 * 250us = 90ms
|
|
* the default values of tone on and off times is 840 or 210ms
|
|
******************************************************************************/
|
|
|
|
#define IXJCTL_DTMF_READY PHONE_DTMF_READY
|
|
#define IXJCTL_GET_DTMF PHONE_GET_DTMF
|
|
#define IXJCTL_GET_DTMF_ASCII PHONE_GET_DTMF_ASCII
|
|
#define IXJCTL_DTMF_OOB PHONE_DTMF_OOB
|
|
#define IXJCTL_EXCEPTION PHONE_EXCEPTION
|
|
#define IXJCTL_PLAY_TONE PHONE_PLAY_TONE
|
|
#define IXJCTL_SET_TONE_ON_TIME PHONE_SET_TONE_ON_TIME
|
|
#define IXJCTL_SET_TONE_OFF_TIME PHONE_SET_TONE_OFF_TIME
|
|
#define IXJCTL_GET_TONE_ON_TIME PHONE_GET_TONE_ON_TIME
|
|
#define IXJCTL_GET_TONE_OFF_TIME PHONE_GET_TONE_OFF_TIME
|
|
#define IXJCTL_GET_TONE_STATE PHONE_GET_TONE_STATE
|
|
#define IXJCTL_BUSY PHONE_BUSY
|
|
#define IXJCTL_RINGBACK PHONE_RINGBACK
|
|
#define IXJCTL_DIALTONE PHONE_DIALTONE
|
|
#define IXJCTL_CPT_STOP PHONE_CPT_STOP
|
|
|
|
/******************************************************************************
|
|
* LineJACK specific IOCTLs
|
|
*
|
|
* The lsb 4 bits of the LED argument represent the state of each of the 4
|
|
* LED's on the LineJACK
|
|
******************************************************************************/
|
|
|
|
#define IXJCTL_SET_LED _IOW ('q', 0xCE, int)
|
|
#define IXJCTL_MIXER _IOW ('q', 0xCF, int)
|
|
|
|
/******************************************************************************
|
|
*
|
|
* The master volume controls use attenuation with 32 levels from 0 to -62dB
|
|
* with steps of 2dB each, the defines should be OR'ed together then sent
|
|
* as the parameter to the mixer command to change the mixer settings.
|
|
*
|
|
******************************************************************************/
|
|
#define MIXER_MASTER_L 0x0000
|
|
#define MIXER_MASTER_R 0x0100
|
|
#define ATT00DB 0x00
|
|
#define ATT02DB 0x01
|
|
#define ATT04DB 0x02
|
|
#define ATT06DB 0x03
|
|
#define ATT08DB 0x04
|
|
#define ATT10DB 0x05
|
|
#define ATT12DB 0x06
|
|
#define ATT14DB 0x07
|
|
#define ATT16DB 0x08
|
|
#define ATT18DB 0x09
|
|
#define ATT20DB 0x0A
|
|
#define ATT22DB 0x0B
|
|
#define ATT24DB 0x0C
|
|
#define ATT26DB 0x0D
|
|
#define ATT28DB 0x0E
|
|
#define ATT30DB 0x0F
|
|
#define ATT32DB 0x10
|
|
#define ATT34DB 0x11
|
|
#define ATT36DB 0x12
|
|
#define ATT38DB 0x13
|
|
#define ATT40DB 0x14
|
|
#define ATT42DB 0x15
|
|
#define ATT44DB 0x16
|
|
#define ATT46DB 0x17
|
|
#define ATT48DB 0x18
|
|
#define ATT50DB 0x19
|
|
#define ATT52DB 0x1A
|
|
#define ATT54DB 0x1B
|
|
#define ATT56DB 0x1C
|
|
#define ATT58DB 0x1D
|
|
#define ATT60DB 0x1E
|
|
#define ATT62DB 0x1F
|
|
#define MASTER_MUTE 0x80
|
|
|
|
/******************************************************************************
|
|
*
|
|
* The input volume controls use gain with 32 levels from +12dB to -50dB
|
|
* with steps of 2dB each, the defines should be OR'ed together then sent
|
|
* as the parameter to the mixer command to change the mixer settings.
|
|
*
|
|
******************************************************************************/
|
|
#define MIXER_PORT_CD_L 0x0600
|
|
#define MIXER_PORT_CD_R 0x0700
|
|
#define MIXER_PORT_LINE_IN_L 0x0800
|
|
#define MIXER_PORT_LINE_IN_R 0x0900
|
|
#define MIXER_PORT_POTS_REC 0x0C00
|
|
#define MIXER_PORT_MIC 0x0E00
|
|
|
|
#define GAIN12DB 0x00
|
|
#define GAIN10DB 0x01
|
|
#define GAIN08DB 0x02
|
|
#define GAIN06DB 0x03
|
|
#define GAIN04DB 0x04
|
|
#define GAIN02DB 0x05
|
|
#define GAIN00DB 0x06
|
|
#define GAIN_02DB 0x07
|
|
#define GAIN_04DB 0x08
|
|
#define GAIN_06DB 0x09
|
|
#define GAIN_08DB 0x0A
|
|
#define GAIN_10DB 0x0B
|
|
#define GAIN_12DB 0x0C
|
|
#define GAIN_14DB 0x0D
|
|
#define GAIN_16DB 0x0E
|
|
#define GAIN_18DB 0x0F
|
|
#define GAIN_20DB 0x10
|
|
#define GAIN_22DB 0x11
|
|
#define GAIN_24DB 0x12
|
|
#define GAIN_26DB 0x13
|
|
#define GAIN_28DB 0x14
|
|
#define GAIN_30DB 0x15
|
|
#define GAIN_32DB 0x16
|
|
#define GAIN_34DB 0x17
|
|
#define GAIN_36DB 0x18
|
|
#define GAIN_38DB 0x19
|
|
#define GAIN_40DB 0x1A
|
|
#define GAIN_42DB 0x1B
|
|
#define GAIN_44DB 0x1C
|
|
#define GAIN_46DB 0x1D
|
|
#define GAIN_48DB 0x1E
|
|
#define GAIN_50DB 0x1F
|
|
#define INPUT_MUTE 0x80
|
|
|
|
/******************************************************************************
|
|
*
|
|
* The POTS volume control use attenuation with 8 levels from 0dB to -28dB
|
|
* with steps of 4dB each, the defines should be OR'ed together then sent
|
|
* as the parameter to the mixer command to change the mixer settings.
|
|
*
|
|
******************************************************************************/
|
|
#define MIXER_PORT_POTS_PLAY 0x0F00
|
|
|
|
#define POTS_ATT_00DB 0x00
|
|
#define POTS_ATT_04DB 0x01
|
|
#define POTS_ATT_08DB 0x02
|
|
#define POTS_ATT_12DB 0x03
|
|
#define POTS_ATT_16DB 0x04
|
|
#define POTS_ATT_20DB 0x05
|
|
#define POTS_ATT_24DB 0x06
|
|
#define POTS_ATT_28DB 0x07
|
|
#define POTS_MUTE 0x80
|
|
|
|
/******************************************************************************
|
|
*
|
|
* The DAA controls the interface to the PSTN port. The driver loads the
|
|
* US coefficients by default, so if you live in a different country you
|
|
* need to load the set for your countries phone system.
|
|
*
|
|
******************************************************************************/
|
|
#define IXJCTL_DAA_COEFF_SET _IOW ('q', 0xD0, int)
|
|
|
|
#define DAA_US 1 /*PITA 8kHz */
|
|
#define DAA_UK 2 /*ISAR34 8kHz */
|
|
#define DAA_FRANCE 3 /* */
|
|
#define DAA_GERMANY 4
|
|
#define DAA_AUSTRALIA 5
|
|
#define DAA_JAPAN 6
|
|
|
|
/******************************************************************************
|
|
*
|
|
* Use IXJCTL_PORT to set or query the port the card is set to. If the
|
|
* argument is set to PORT_QUERY, the return value of the ioctl will
|
|
* indicate which port is currently in use, otherwise it will change the
|
|
* port.
|
|
*
|
|
******************************************************************************/
|
|
#define IXJCTL_PORT _IOW ('q', 0xD1, int)
|
|
|
|
#define PORT_QUERY 0
|
|
#define PORT_POTS 1
|
|
#define PORT_PSTN 2
|
|
#define PORT_SPEAKER 3
|
|
#define PORT_HANDSET 4
|
|
|
|
#define IXJCTL_PSTN_SET_STATE PHONE_PSTN_SET_STATE
|
|
#define IXJCTL_PSTN_GET_STATE PHONE_PSTN_GET_STATE
|
|
|
|
#define PSTN_ON_HOOK 0
|
|
#define PSTN_RINGING 1
|
|
#define PSTN_OFF_HOOK 2
|
|
#define PSTN_PULSE_DIAL 3
|
|
|
|
/******************************************************************************
|
|
*
|
|
* The DAA Analog GAIN sets 2 parameters at one time, the receive gain (AGRR),
|
|
* and the transmit gain (AGX). OR together the components and pass them
|
|
* as the parameter to IXJCTL_DAA_AGAIN. The default setting is both at 0dB.
|
|
*
|
|
******************************************************************************/
|
|
#define IXJCTL_DAA_AGAIN _IOW ('q', 0xD2, int)
|
|
|
|
#define AGRR00DB 0x00 /* Analog gain in receive direction 0dB */
|
|
#define AGRR3_5DB 0x10 /* Analog gain in receive direction 3.5dB */
|
|
#define AGRR06DB 0x30 /* Analog gain in receive direction 6dB */
|
|
|
|
#define AGX00DB 0x00 /* Analog gain in transmit direction 0dB */
|
|
#define AGX_6DB 0x04 /* Analog gain in transmit direction -6dB */
|
|
#define AGX3_5DB 0x08 /* Analog gain in transmit direction 3.5dB */
|
|
#define AGX_2_5B 0x0C /* Analog gain in transmit direction -2.5dB */
|
|
|
|
#define IXJCTL_PSTN_LINETEST _IO ('q', 0xD3)
|
|
|
|
#define IXJCTL_CID _IOR ('q', 0xD4, PHONE_CID *)
|
|
#define IXJCTL_VMWI _IOR ('q', 0xD8, int)
|
|
#define IXJCTL_CIDCW _IOW ('q', 0xD9, PHONE_CID *)
|
|
/******************************************************************************
|
|
*
|
|
* The wink duration is tunable with this ioctl. The default wink duration
|
|
* is 320ms. You do not need to use this ioctl if you do not require a
|
|
* different wink duration.
|
|
*
|
|
******************************************************************************/
|
|
#define IXJCTL_WINK_DURATION PHONE_WINK_DURATION
|
|
|
|
/******************************************************************************
|
|
*
|
|
* This ioctl will connect the POTS port to the PSTN port on the LineJACK
|
|
* In order for this to work properly the port selection should be set to
|
|
* the PSTN port with IXJCTL_PORT prior to calling this ioctl. This will
|
|
* enable conference calls between PSTN callers and network callers.
|
|
* Passing a 1 to this ioctl enables the POTS<->PSTN connection while
|
|
* passing a 0 turns it back off.
|
|
*
|
|
******************************************************************************/
|
|
#define IXJCTL_POTS_PSTN _IOW ('q', 0xD5, int)
|
|
|
|
/******************************************************************************
|
|
*
|
|
* IOCTLs added by request.
|
|
*
|
|
* IXJCTL_HZ sets the value your Linux kernel uses for HZ as defined in
|
|
* /usr/include/asm/param.h, this determines the fundamental
|
|
* frequency of the clock ticks on your Linux system. The kernel
|
|
* must be rebuilt if you change this value, also all modules you
|
|
* use (except this one) must be recompiled. The default value
|
|
* is 100, and you only need to use this IOCTL if you use some
|
|
* other value.
|
|
*
|
|
*
|
|
* IXJCTL_RATE sets the number of times per second that the driver polls
|
|
* the DSP. This value cannot be larger than HZ. By
|
|
* increasing both of these values, you may be able to reduce
|
|
* latency because the max hang time that can exist between the
|
|
* driver and the DSP will be reduced.
|
|
*
|
|
******************************************************************************/
|
|
|
|
#define IXJCTL_HZ _IOW ('q', 0xE0, int)
|
|
#define IXJCTL_RATE _IOW ('q', 0xE1, int)
|
|
#define IXJCTL_FRAMES_READ _IOR ('q', 0xE2, unsigned long)
|
|
#define IXJCTL_FRAMES_WRITTEN _IOR ('q', 0xE3, unsigned long)
|
|
#define IXJCTL_READ_WAIT _IOR ('q', 0xE4, unsigned long)
|
|
#define IXJCTL_WRITE_WAIT _IOR ('q', 0xE5, unsigned long)
|
|
#define IXJCTL_DRYBUFFER_READ _IOR ('q', 0xE6, unsigned long)
|
|
#define IXJCTL_DRYBUFFER_CLEAR _IO ('q', 0xE7)
|
|
#define IXJCTL_DTMF_PRESCALE _IOW ('q', 0xE8, int)
|
|
|
|
/******************************************************************************
|
|
*
|
|
* This ioctl allows the user application to control what events the driver
|
|
* will send signals for, and what signals it will send for which event.
|
|
* By default, if signaling is enabled, all events will send SIGIO when
|
|
* they occur. To disable signals for an event set the signal to 0.
|
|
*
|
|
******************************************************************************/
|
|
typedef enum {
|
|
SIG_DTMF_READY,
|
|
SIG_HOOKSTATE,
|
|
SIG_FLASH,
|
|
SIG_PSTN_RING,
|
|
SIG_CALLER_ID,
|
|
SIG_PSTN_WINK,
|
|
SIG_F0, SIG_F1, SIG_F2, SIG_F3,
|
|
SIG_FC0, SIG_FC1, SIG_FC2, SIG_FC3,
|
|
SIG_READ_READY = 33,
|
|
SIG_WRITE_READY = 34
|
|
} IXJ_SIGEVENT;
|
|
|
|
typedef struct {
|
|
unsigned int event;
|
|
int signal;
|
|
} IXJ_SIGDEF;
|
|
|
|
#define IXJCTL_SIGCTL _IOW ('q', 0xE9, IXJ_SIGDEF *)
|
|
|
|
/******************************************************************************
|
|
*
|
|
* These ioctls allow the user application to change the gain in the
|
|
* Smart Cable of the Internet Phone Card. Sending -1 as a value will cause
|
|
* return value to be the current setting. Valid values to set are 0x00 - 0x1F
|
|
*
|
|
* 11111 = +12 dB
|
|
* 10111 = 0 dB
|
|
* 00000 = -34.5 dB
|
|
*
|
|
* IXJCTL_SC_RXG sets the Receive gain
|
|
* IXJCTL_SC_TXG sets the Transmit gain
|
|
*
|
|
******************************************************************************/
|
|
#define IXJCTL_SC_RXG _IOW ('q', 0xEA, int)
|
|
#define IXJCTL_SC_TXG _IOW ('q', 0xEB, int)
|
|
|
|
/******************************************************************************
|
|
*
|
|
* The intercom IOCTL's short the output from one card to the input of the
|
|
* other and vice versa (actually done in the DSP read function). It is only
|
|
* necessary to execute the IOCTL on one card, but it is necessary to have
|
|
* both devices open to be able to detect hook switch changes. The record
|
|
* codec and rate of each card must match the playback codec and rate of
|
|
* the other card for this to work properly.
|
|
*
|
|
******************************************************************************/
|
|
|
|
#define IXJCTL_INTERCOM_START _IOW ('q', 0xFD, int)
|
|
#define IXJCTL_INTERCOM_STOP _IOW ('q', 0xFE, int)
|
|
|
|
/******************************************************************************
|
|
*
|
|
* new structure for accessing raw filter information
|
|
*
|
|
******************************************************************************/
|
|
|
|
typedef struct {
|
|
unsigned int filter;
|
|
char enable;
|
|
unsigned int coeff[19];
|
|
} IXJ_FILTER_RAW;
|
|
|
|
#endif
|