linux-hardened/Documentation/cpu-freq/amd-powernow.txt
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

38 lines
1.6 KiB
Text

PowerNow! and Cool'n'Quiet are AMD names for frequency
management capabilities in AMD processors. As the hardware
implementation changes in new generations of the processors,
there is a different cpu-freq driver for each generation.
Note that the driver's will not load on the "wrong" hardware,
so it is safe to try each driver in turn when in doubt as to
which is the correct driver.
Note that the functionality to change frequency (and voltage)
is not available in all processors. The drivers will refuse
to load on processors without this capability. The capability
is detected with the cpuid instruction.
The drivers use BIOS supplied tables to obtain frequency and
voltage information appropriate for a particular platform.
Frequency transitions will be unavailable if the BIOS does
not supply these tables.
6th Generation: powernow-k6
7th Generation: powernow-k7: Athlon, Duron, Geode.
8th Generation: powernow-k8: Athlon, Athlon 64, Opteron, Sempron.
Documentation on this functionality in 8th generation processors
is available in the "BIOS and Kernel Developer's Guide", publication
26094, in chapter 9, available for download from www.amd.com.
BIOS supplied data, for powernow-k7 and for powernow-k8, may be
from either the PSB table or from ACPI objects. The ACPI support
is only available if the kernel config sets CONFIG_ACPI_PROCESSOR.
The powernow-k8 driver will attempt to use ACPI if so configured,
and fall back to PST if that fails.
The powernow-k7 driver will try to use the PSB support first, and
fall back to ACPI if the PSB support fails. A module parameter,
acpi_force, is provided to force ACPI support to be used instead
of PSB support.