2331e06865
Declare uart_ops structures as const as they are only stored in the ops field of an uart_port structure. This field is of type const, so uart_ops structures having this property can be made const too. File size details before and after patching. First line of every .o file shows the file size before patching and second line shows the size after patching. text data bss dec hex filename 2977 456 64 3497 da9 drivers/tty/serial/amba-pl010.o 3169 272 64 3505 db1 drivers/tty/serial/amba-pl010.o 3109 456 0 3565 ded drivers/tty/serial/efm32-uart.o 3301 272 0 3573 df5 drivers/tty/serial/efm32-uart.o 10668 753 1 11422 2c9e drivers/tty/serial/icom.o 10860 561 1 11422 2c9e drivers/tty/serial/icom.o 23904 408 8 24320 5f00 drivers/tty/serial/ioc3_serial.o 24088 224 8 24320 5f00 drivers/tty/serial/ioc3_serial.o 10516 560 4 11080 2b48 drivers/tty/serial/ioc4_serial.o 10709 368 4 11081 2b49 drivers/tty/serial/ioc4_serial.o 7853 648 1216 9717 25f5 drivers/tty/serial/mpsc.o 8037 456 1216 9709 25ed drivers/tty/serial/mpsc.o 10248 456 0 10704 29d0 drivers/tty/serial/omap-serial.o 10440 272 0 10712 29d8 drivers/tty/serial/omap-serial.o 8122 532 1984 10638 298e drivers/tty/serial/pmac_zilog.o 8306 340 1984 10630 2986 drivers/tty/serial/pmac_zilog.o 3808 456 0 4264 10a8 drivers/tty/serial/pxa.o 4000 264 0 4264 10a8 drivers/tty/serial/pxa.o 21781 3864 0 25645 642d drivers/tty/serial/serial-tegra.o 22037 3608 0 25645 642d drivers/tty/serial/serial-tegra.o 2481 456 96 3033 bd9 drivers/tty/serial/sprd_serial.o 2673 272 96 3041 be1 drivers/tty/serial/sprd_serial.o 5534 300 512 6346 18ca drivers/tty/serial/vr41xx_siu.o 5630 204 512 6346 18ca drivers/tty/serial/vr41xx_siu.o 6730 1576 128 8434 20f2 drivers/tty/serial/vt8500_serial.o 6986 1320 128 8434 20f2 drivers/tty/serial/vt8500_serial.o Cross compiled for mips architecture. 3005 488 0 3493 da5 drivers/tty/serial/pnx8xxx_uart.o 3189 304 0 3493 da5 drivers/tty/serial/pnx8xxx_uart.o 4272 196 1056 5524 1594 drivers/tty/serial/dz.o 4368 100 1056 5524 1594 drivers/tty/serial/dz.o 6551 144 16 6711 1a37 drivers/tty/serial/ip22zilog.o 6647 48 16 6711 1a37 drivers/tty/serial/ip22zilog.o 9612 428 1520 11560 2d28 drivers/tty/serial/serial_txx9.o 9708 332 1520 11560 2d28 drivers/tty/serial/serial_txx9.o 4156 296 16 4468 1174 drivers/tty/serial/ar933x_uart.o 4252 200 16 4468 1174 drivers/tty/serial/ar933x_uart.o Cross compiled for arm archiecture. 11716 1780 44 13540 34e4 drivers/tty/serial/sirfsoc_uart.o 11808 1688 44 13540 34e4 drivers/tty/serial/sirfsoc_uart.o 13352 596 56 14004 36b4 drivers/tty/serial/amba-pl011.o 13444 504 56 14004 36b4 drivers/tty/serial/amba-pl011.o Cross compiled for sparc architecture. 4664 528 32 5224 1468 drivers/tty/serial/sunhv.o 4848 344 32 5224 1468 drivers/tty/serial/sunhv.o 8080 332 28 8440 20f8 drivers/tty/serial/sunzilog.o 8184 228 28 8440 20f8 drivers/tty/serial/sunzilog.o Cross compiled for ia64 architecture. 10226 549 472 11247 2bef drivers/tty/serial/sn_console.o 10414 365 472 11251 2bf3 drivers/tty/serial/sn_console.o The files drivers/tty/serial/zs.o, drivers/tty/serial/lpc32xx_hs.o and drivers/tty/serial/lantiq.o did not compile. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1652 lines
41 KiB
C
1652 lines
41 KiB
C
/* sunzilog.c: Zilog serial driver for Sparc systems.
|
|
*
|
|
* Driver for Zilog serial chips found on Sun workstations and
|
|
* servers. This driver could actually be made more generic.
|
|
*
|
|
* This is based on the old drivers/sbus/char/zs.c code. A lot
|
|
* of code has been simply moved over directly from there but
|
|
* much has been rewritten. Credits therefore go out to Eddie
|
|
* C. Dost, Pete Zaitcev, Ted Ts'o and Alex Buell for their
|
|
* work there.
|
|
*
|
|
* Copyright (C) 2002, 2006, 2007 David S. Miller (davem@davemloft.net)
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/major.h>
|
|
#include <linux/string.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/circ_buf.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/sysrq.h>
|
|
#include <linux/console.h>
|
|
#include <linux/spinlock.h>
|
|
#ifdef CONFIG_SERIO
|
|
#include <linux/serio.h>
|
|
#endif
|
|
#include <linux/init.h>
|
|
#include <linux/of_device.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/setup.h>
|
|
|
|
#if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
|
|
#define SUPPORT_SYSRQ
|
|
#endif
|
|
|
|
#include <linux/serial_core.h>
|
|
#include <linux/sunserialcore.h>
|
|
|
|
#include "sunzilog.h"
|
|
|
|
/* On 32-bit sparcs we need to delay after register accesses
|
|
* to accommodate sun4 systems, but we do not need to flush writes.
|
|
* On 64-bit sparc we only need to flush single writes to ensure
|
|
* completion.
|
|
*/
|
|
#ifndef CONFIG_SPARC64
|
|
#define ZSDELAY() udelay(5)
|
|
#define ZSDELAY_LONG() udelay(20)
|
|
#define ZS_WSYNC(channel) do { } while (0)
|
|
#else
|
|
#define ZSDELAY()
|
|
#define ZSDELAY_LONG()
|
|
#define ZS_WSYNC(__channel) \
|
|
readb(&((__channel)->control))
|
|
#endif
|
|
|
|
#define ZS_CLOCK 4915200 /* Zilog input clock rate. */
|
|
#define ZS_CLOCK_DIVISOR 16 /* Divisor this driver uses. */
|
|
|
|
/*
|
|
* We wrap our port structure around the generic uart_port.
|
|
*/
|
|
struct uart_sunzilog_port {
|
|
struct uart_port port;
|
|
|
|
/* IRQ servicing chain. */
|
|
struct uart_sunzilog_port *next;
|
|
|
|
/* Current values of Zilog write registers. */
|
|
unsigned char curregs[NUM_ZSREGS];
|
|
|
|
unsigned int flags;
|
|
#define SUNZILOG_FLAG_CONS_KEYB 0x00000001
|
|
#define SUNZILOG_FLAG_CONS_MOUSE 0x00000002
|
|
#define SUNZILOG_FLAG_IS_CONS 0x00000004
|
|
#define SUNZILOG_FLAG_IS_KGDB 0x00000008
|
|
#define SUNZILOG_FLAG_MODEM_STATUS 0x00000010
|
|
#define SUNZILOG_FLAG_IS_CHANNEL_A 0x00000020
|
|
#define SUNZILOG_FLAG_REGS_HELD 0x00000040
|
|
#define SUNZILOG_FLAG_TX_STOPPED 0x00000080
|
|
#define SUNZILOG_FLAG_TX_ACTIVE 0x00000100
|
|
#define SUNZILOG_FLAG_ESCC 0x00000200
|
|
#define SUNZILOG_FLAG_ISR_HANDLER 0x00000400
|
|
|
|
unsigned int cflag;
|
|
|
|
unsigned char parity_mask;
|
|
unsigned char prev_status;
|
|
|
|
#ifdef CONFIG_SERIO
|
|
struct serio serio;
|
|
int serio_open;
|
|
#endif
|
|
};
|
|
|
|
static void sunzilog_putchar(struct uart_port *port, int ch);
|
|
|
|
#define ZILOG_CHANNEL_FROM_PORT(PORT) ((struct zilog_channel __iomem *)((PORT)->membase))
|
|
#define UART_ZILOG(PORT) ((struct uart_sunzilog_port *)(PORT))
|
|
|
|
#define ZS_IS_KEYB(UP) ((UP)->flags & SUNZILOG_FLAG_CONS_KEYB)
|
|
#define ZS_IS_MOUSE(UP) ((UP)->flags & SUNZILOG_FLAG_CONS_MOUSE)
|
|
#define ZS_IS_CONS(UP) ((UP)->flags & SUNZILOG_FLAG_IS_CONS)
|
|
#define ZS_IS_KGDB(UP) ((UP)->flags & SUNZILOG_FLAG_IS_KGDB)
|
|
#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & SUNZILOG_FLAG_MODEM_STATUS)
|
|
#define ZS_IS_CHANNEL_A(UP) ((UP)->flags & SUNZILOG_FLAG_IS_CHANNEL_A)
|
|
#define ZS_REGS_HELD(UP) ((UP)->flags & SUNZILOG_FLAG_REGS_HELD)
|
|
#define ZS_TX_STOPPED(UP) ((UP)->flags & SUNZILOG_FLAG_TX_STOPPED)
|
|
#define ZS_TX_ACTIVE(UP) ((UP)->flags & SUNZILOG_FLAG_TX_ACTIVE)
|
|
|
|
/* Reading and writing Zilog8530 registers. The delays are to make this
|
|
* driver work on the Sun4 which needs a settling delay after each chip
|
|
* register access, other machines handle this in hardware via auxiliary
|
|
* flip-flops which implement the settle time we do in software.
|
|
*
|
|
* The port lock must be held and local IRQs must be disabled
|
|
* when {read,write}_zsreg is invoked.
|
|
*/
|
|
static unsigned char read_zsreg(struct zilog_channel __iomem *channel,
|
|
unsigned char reg)
|
|
{
|
|
unsigned char retval;
|
|
|
|
writeb(reg, &channel->control);
|
|
ZSDELAY();
|
|
retval = readb(&channel->control);
|
|
ZSDELAY();
|
|
|
|
return retval;
|
|
}
|
|
|
|
static void write_zsreg(struct zilog_channel __iomem *channel,
|
|
unsigned char reg, unsigned char value)
|
|
{
|
|
writeb(reg, &channel->control);
|
|
ZSDELAY();
|
|
writeb(value, &channel->control);
|
|
ZSDELAY();
|
|
}
|
|
|
|
static void sunzilog_clear_fifo(struct zilog_channel __iomem *channel)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < 32; i++) {
|
|
unsigned char regval;
|
|
|
|
regval = readb(&channel->control);
|
|
ZSDELAY();
|
|
if (regval & Rx_CH_AV)
|
|
break;
|
|
|
|
regval = read_zsreg(channel, R1);
|
|
readb(&channel->data);
|
|
ZSDELAY();
|
|
|
|
if (regval & (PAR_ERR | Rx_OVR | CRC_ERR)) {
|
|
writeb(ERR_RES, &channel->control);
|
|
ZSDELAY();
|
|
ZS_WSYNC(channel);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* This function must only be called when the TX is not busy. The UART
|
|
* port lock must be held and local interrupts disabled.
|
|
*/
|
|
static int __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *regs)
|
|
{
|
|
int i;
|
|
int escc;
|
|
unsigned char r15;
|
|
|
|
/* Let pending transmits finish. */
|
|
for (i = 0; i < 1000; i++) {
|
|
unsigned char stat = read_zsreg(channel, R1);
|
|
if (stat & ALL_SNT)
|
|
break;
|
|
udelay(100);
|
|
}
|
|
|
|
writeb(ERR_RES, &channel->control);
|
|
ZSDELAY();
|
|
ZS_WSYNC(channel);
|
|
|
|
sunzilog_clear_fifo(channel);
|
|
|
|
/* Disable all interrupts. */
|
|
write_zsreg(channel, R1,
|
|
regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB));
|
|
|
|
/* Set parity, sync config, stop bits, and clock divisor. */
|
|
write_zsreg(channel, R4, regs[R4]);
|
|
|
|
/* Set misc. TX/RX control bits. */
|
|
write_zsreg(channel, R10, regs[R10]);
|
|
|
|
/* Set TX/RX controls sans the enable bits. */
|
|
write_zsreg(channel, R3, regs[R3] & ~RxENAB);
|
|
write_zsreg(channel, R5, regs[R5] & ~TxENAB);
|
|
|
|
/* Synchronous mode config. */
|
|
write_zsreg(channel, R6, regs[R6]);
|
|
write_zsreg(channel, R7, regs[R7]);
|
|
|
|
/* Don't mess with the interrupt vector (R2, unused by us) and
|
|
* master interrupt control (R9). We make sure this is setup
|
|
* properly at probe time then never touch it again.
|
|
*/
|
|
|
|
/* Disable baud generator. */
|
|
write_zsreg(channel, R14, regs[R14] & ~BRENAB);
|
|
|
|
/* Clock mode control. */
|
|
write_zsreg(channel, R11, regs[R11]);
|
|
|
|
/* Lower and upper byte of baud rate generator divisor. */
|
|
write_zsreg(channel, R12, regs[R12]);
|
|
write_zsreg(channel, R13, regs[R13]);
|
|
|
|
/* Now rewrite R14, with BRENAB (if set). */
|
|
write_zsreg(channel, R14, regs[R14]);
|
|
|
|
/* External status interrupt control. */
|
|
write_zsreg(channel, R15, (regs[R15] | WR7pEN) & ~FIFOEN);
|
|
|
|
/* ESCC Extension Register */
|
|
r15 = read_zsreg(channel, R15);
|
|
if (r15 & 0x01) {
|
|
write_zsreg(channel, R7, regs[R7p]);
|
|
|
|
/* External status interrupt and FIFO control. */
|
|
write_zsreg(channel, R15, regs[R15] & ~WR7pEN);
|
|
escc = 1;
|
|
} else {
|
|
/* Clear FIFO bit case it is an issue */
|
|
regs[R15] &= ~FIFOEN;
|
|
escc = 0;
|
|
}
|
|
|
|
/* Reset external status interrupts. */
|
|
write_zsreg(channel, R0, RES_EXT_INT); /* First Latch */
|
|
write_zsreg(channel, R0, RES_EXT_INT); /* Second Latch */
|
|
|
|
/* Rewrite R3/R5, this time without enables masked. */
|
|
write_zsreg(channel, R3, regs[R3]);
|
|
write_zsreg(channel, R5, regs[R5]);
|
|
|
|
/* Rewrite R1, this time without IRQ enabled masked. */
|
|
write_zsreg(channel, R1, regs[R1]);
|
|
|
|
return escc;
|
|
}
|
|
|
|
/* Reprogram the Zilog channel HW registers with the copies found in the
|
|
* software state struct. If the transmitter is busy, we defer this update
|
|
* until the next TX complete interrupt. Else, we do it right now.
|
|
*
|
|
* The UART port lock must be held and local interrupts disabled.
|
|
*/
|
|
static void sunzilog_maybe_update_regs(struct uart_sunzilog_port *up,
|
|
struct zilog_channel __iomem *channel)
|
|
{
|
|
if (!ZS_REGS_HELD(up)) {
|
|
if (ZS_TX_ACTIVE(up)) {
|
|
up->flags |= SUNZILOG_FLAG_REGS_HELD;
|
|
} else {
|
|
__load_zsregs(channel, up->curregs);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void sunzilog_change_mouse_baud(struct uart_sunzilog_port *up)
|
|
{
|
|
unsigned int cur_cflag = up->cflag;
|
|
int brg, new_baud;
|
|
|
|
up->cflag &= ~CBAUD;
|
|
up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud);
|
|
|
|
brg = BPS_TO_BRG(new_baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
|
|
up->curregs[R12] = (brg & 0xff);
|
|
up->curregs[R13] = (brg >> 8) & 0xff;
|
|
sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(&up->port));
|
|
}
|
|
|
|
static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up,
|
|
unsigned char ch, int is_break)
|
|
{
|
|
if (ZS_IS_KEYB(up)) {
|
|
/* Stop-A is handled by drivers/char/keyboard.c now. */
|
|
#ifdef CONFIG_SERIO
|
|
if (up->serio_open)
|
|
serio_interrupt(&up->serio, ch, 0);
|
|
#endif
|
|
} else if (ZS_IS_MOUSE(up)) {
|
|
int ret = suncore_mouse_baud_detection(ch, is_break);
|
|
|
|
switch (ret) {
|
|
case 2:
|
|
sunzilog_change_mouse_baud(up);
|
|
/* fallthru */
|
|
case 1:
|
|
break;
|
|
|
|
case 0:
|
|
#ifdef CONFIG_SERIO
|
|
if (up->serio_open)
|
|
serio_interrupt(&up->serio, ch, 0);
|
|
#endif
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static struct tty_port *
|
|
sunzilog_receive_chars(struct uart_sunzilog_port *up,
|
|
struct zilog_channel __iomem *channel)
|
|
{
|
|
struct tty_port *port = NULL;
|
|
unsigned char ch, r1, flag;
|
|
|
|
if (up->port.state != NULL) /* Unopened serial console */
|
|
port = &up->port.state->port;
|
|
|
|
for (;;) {
|
|
|
|
r1 = read_zsreg(channel, R1);
|
|
if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) {
|
|
writeb(ERR_RES, &channel->control);
|
|
ZSDELAY();
|
|
ZS_WSYNC(channel);
|
|
}
|
|
|
|
ch = readb(&channel->control);
|
|
ZSDELAY();
|
|
|
|
/* This funny hack depends upon BRK_ABRT not interfering
|
|
* with the other bits we care about in R1.
|
|
*/
|
|
if (ch & BRK_ABRT)
|
|
r1 |= BRK_ABRT;
|
|
|
|
if (!(ch & Rx_CH_AV))
|
|
break;
|
|
|
|
ch = readb(&channel->data);
|
|
ZSDELAY();
|
|
|
|
ch &= up->parity_mask;
|
|
|
|
if (unlikely(ZS_IS_KEYB(up)) || unlikely(ZS_IS_MOUSE(up))) {
|
|
sunzilog_kbdms_receive_chars(up, ch, 0);
|
|
continue;
|
|
}
|
|
|
|
/* A real serial line, record the character and status. */
|
|
flag = TTY_NORMAL;
|
|
up->port.icount.rx++;
|
|
if (r1 & (BRK_ABRT | PAR_ERR | Rx_OVR | CRC_ERR)) {
|
|
if (r1 & BRK_ABRT) {
|
|
r1 &= ~(PAR_ERR | CRC_ERR);
|
|
up->port.icount.brk++;
|
|
if (uart_handle_break(&up->port))
|
|
continue;
|
|
}
|
|
else if (r1 & PAR_ERR)
|
|
up->port.icount.parity++;
|
|
else if (r1 & CRC_ERR)
|
|
up->port.icount.frame++;
|
|
if (r1 & Rx_OVR)
|
|
up->port.icount.overrun++;
|
|
r1 &= up->port.read_status_mask;
|
|
if (r1 & BRK_ABRT)
|
|
flag = TTY_BREAK;
|
|
else if (r1 & PAR_ERR)
|
|
flag = TTY_PARITY;
|
|
else if (r1 & CRC_ERR)
|
|
flag = TTY_FRAME;
|
|
}
|
|
if (uart_handle_sysrq_char(&up->port, ch) || !port)
|
|
continue;
|
|
|
|
if (up->port.ignore_status_mask == 0xff ||
|
|
(r1 & up->port.ignore_status_mask) == 0) {
|
|
tty_insert_flip_char(port, ch, flag);
|
|
}
|
|
if (r1 & Rx_OVR)
|
|
tty_insert_flip_char(port, 0, TTY_OVERRUN);
|
|
}
|
|
|
|
return port;
|
|
}
|
|
|
|
static void sunzilog_status_handle(struct uart_sunzilog_port *up,
|
|
struct zilog_channel __iomem *channel)
|
|
{
|
|
unsigned char status;
|
|
|
|
status = readb(&channel->control);
|
|
ZSDELAY();
|
|
|
|
writeb(RES_EXT_INT, &channel->control);
|
|
ZSDELAY();
|
|
ZS_WSYNC(channel);
|
|
|
|
if (status & BRK_ABRT) {
|
|
if (ZS_IS_MOUSE(up))
|
|
sunzilog_kbdms_receive_chars(up, 0, 1);
|
|
if (ZS_IS_CONS(up)) {
|
|
/* Wait for BREAK to deassert to avoid potentially
|
|
* confusing the PROM.
|
|
*/
|
|
while (1) {
|
|
status = readb(&channel->control);
|
|
ZSDELAY();
|
|
if (!(status & BRK_ABRT))
|
|
break;
|
|
}
|
|
sun_do_break();
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (ZS_WANTS_MODEM_STATUS(up)) {
|
|
if (status & SYNC)
|
|
up->port.icount.dsr++;
|
|
|
|
/* The Zilog just gives us an interrupt when DCD/CTS/etc. change.
|
|
* But it does not tell us which bit has changed, we have to keep
|
|
* track of this ourselves.
|
|
*/
|
|
if ((status ^ up->prev_status) ^ DCD)
|
|
uart_handle_dcd_change(&up->port,
|
|
(status & DCD));
|
|
if ((status ^ up->prev_status) ^ CTS)
|
|
uart_handle_cts_change(&up->port,
|
|
(status & CTS));
|
|
|
|
wake_up_interruptible(&up->port.state->port.delta_msr_wait);
|
|
}
|
|
|
|
up->prev_status = status;
|
|
}
|
|
|
|
static void sunzilog_transmit_chars(struct uart_sunzilog_port *up,
|
|
struct zilog_channel __iomem *channel)
|
|
{
|
|
struct circ_buf *xmit;
|
|
|
|
if (ZS_IS_CONS(up)) {
|
|
unsigned char status = readb(&channel->control);
|
|
ZSDELAY();
|
|
|
|
/* TX still busy? Just wait for the next TX done interrupt.
|
|
*
|
|
* It can occur because of how we do serial console writes. It would
|
|
* be nice to transmit console writes just like we normally would for
|
|
* a TTY line. (ie. buffered and TX interrupt driven). That is not
|
|
* easy because console writes cannot sleep. One solution might be
|
|
* to poll on enough port->xmit space becoming free. -DaveM
|
|
*/
|
|
if (!(status & Tx_BUF_EMP))
|
|
return;
|
|
}
|
|
|
|
up->flags &= ~SUNZILOG_FLAG_TX_ACTIVE;
|
|
|
|
if (ZS_REGS_HELD(up)) {
|
|
__load_zsregs(channel, up->curregs);
|
|
up->flags &= ~SUNZILOG_FLAG_REGS_HELD;
|
|
}
|
|
|
|
if (ZS_TX_STOPPED(up)) {
|
|
up->flags &= ~SUNZILOG_FLAG_TX_STOPPED;
|
|
goto ack_tx_int;
|
|
}
|
|
|
|
if (up->port.x_char) {
|
|
up->flags |= SUNZILOG_FLAG_TX_ACTIVE;
|
|
writeb(up->port.x_char, &channel->data);
|
|
ZSDELAY();
|
|
ZS_WSYNC(channel);
|
|
|
|
up->port.icount.tx++;
|
|
up->port.x_char = 0;
|
|
return;
|
|
}
|
|
|
|
if (up->port.state == NULL)
|
|
goto ack_tx_int;
|
|
xmit = &up->port.state->xmit;
|
|
if (uart_circ_empty(xmit))
|
|
goto ack_tx_int;
|
|
|
|
if (uart_tx_stopped(&up->port))
|
|
goto ack_tx_int;
|
|
|
|
up->flags |= SUNZILOG_FLAG_TX_ACTIVE;
|
|
writeb(xmit->buf[xmit->tail], &channel->data);
|
|
ZSDELAY();
|
|
ZS_WSYNC(channel);
|
|
|
|
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
|
up->port.icount.tx++;
|
|
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
uart_write_wakeup(&up->port);
|
|
|
|
return;
|
|
|
|
ack_tx_int:
|
|
writeb(RES_Tx_P, &channel->control);
|
|
ZSDELAY();
|
|
ZS_WSYNC(channel);
|
|
}
|
|
|
|
static irqreturn_t sunzilog_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct uart_sunzilog_port *up = dev_id;
|
|
|
|
while (up) {
|
|
struct zilog_channel __iomem *channel
|
|
= ZILOG_CHANNEL_FROM_PORT(&up->port);
|
|
struct tty_port *port;
|
|
unsigned char r3;
|
|
|
|
spin_lock(&up->port.lock);
|
|
r3 = read_zsreg(channel, R3);
|
|
|
|
/* Channel A */
|
|
port = NULL;
|
|
if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
|
|
writeb(RES_H_IUS, &channel->control);
|
|
ZSDELAY();
|
|
ZS_WSYNC(channel);
|
|
|
|
if (r3 & CHARxIP)
|
|
port = sunzilog_receive_chars(up, channel);
|
|
if (r3 & CHAEXT)
|
|
sunzilog_status_handle(up, channel);
|
|
if (r3 & CHATxIP)
|
|
sunzilog_transmit_chars(up, channel);
|
|
}
|
|
spin_unlock(&up->port.lock);
|
|
|
|
if (port)
|
|
tty_flip_buffer_push(port);
|
|
|
|
/* Channel B */
|
|
up = up->next;
|
|
channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
|
|
|
|
spin_lock(&up->port.lock);
|
|
port = NULL;
|
|
if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
|
|
writeb(RES_H_IUS, &channel->control);
|
|
ZSDELAY();
|
|
ZS_WSYNC(channel);
|
|
|
|
if (r3 & CHBRxIP)
|
|
port = sunzilog_receive_chars(up, channel);
|
|
if (r3 & CHBEXT)
|
|
sunzilog_status_handle(up, channel);
|
|
if (r3 & CHBTxIP)
|
|
sunzilog_transmit_chars(up, channel);
|
|
}
|
|
spin_unlock(&up->port.lock);
|
|
|
|
if (port)
|
|
tty_flip_buffer_push(port);
|
|
|
|
up = up->next;
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* A convenient way to quickly get R0 status. The caller must _not_ hold the
|
|
* port lock, it is acquired here.
|
|
*/
|
|
static __inline__ unsigned char sunzilog_read_channel_status(struct uart_port *port)
|
|
{
|
|
struct zilog_channel __iomem *channel;
|
|
unsigned char status;
|
|
|
|
channel = ZILOG_CHANNEL_FROM_PORT(port);
|
|
status = readb(&channel->control);
|
|
ZSDELAY();
|
|
|
|
return status;
|
|
}
|
|
|
|
/* The port lock is not held. */
|
|
static unsigned int sunzilog_tx_empty(struct uart_port *port)
|
|
{
|
|
unsigned long flags;
|
|
unsigned char status;
|
|
unsigned int ret;
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
|
|
status = sunzilog_read_channel_status(port);
|
|
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
|
|
if (status & Tx_BUF_EMP)
|
|
ret = TIOCSER_TEMT;
|
|
else
|
|
ret = 0;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* The port lock is held and interrupts are disabled. */
|
|
static unsigned int sunzilog_get_mctrl(struct uart_port *port)
|
|
{
|
|
unsigned char status;
|
|
unsigned int ret;
|
|
|
|
status = sunzilog_read_channel_status(port);
|
|
|
|
ret = 0;
|
|
if (status & DCD)
|
|
ret |= TIOCM_CAR;
|
|
if (status & SYNC)
|
|
ret |= TIOCM_DSR;
|
|
if (status & CTS)
|
|
ret |= TIOCM_CTS;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* The port lock is held and interrupts are disabled. */
|
|
static void sunzilog_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
|
{
|
|
struct uart_sunzilog_port *up =
|
|
container_of(port, struct uart_sunzilog_port, port);
|
|
struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
|
|
unsigned char set_bits, clear_bits;
|
|
|
|
set_bits = clear_bits = 0;
|
|
|
|
if (mctrl & TIOCM_RTS)
|
|
set_bits |= RTS;
|
|
else
|
|
clear_bits |= RTS;
|
|
if (mctrl & TIOCM_DTR)
|
|
set_bits |= DTR;
|
|
else
|
|
clear_bits |= DTR;
|
|
|
|
/* NOTE: Not subject to 'transmitter active' rule. */
|
|
up->curregs[R5] |= set_bits;
|
|
up->curregs[R5] &= ~clear_bits;
|
|
write_zsreg(channel, R5, up->curregs[R5]);
|
|
}
|
|
|
|
/* The port lock is held and interrupts are disabled. */
|
|
static void sunzilog_stop_tx(struct uart_port *port)
|
|
{
|
|
struct uart_sunzilog_port *up =
|
|
container_of(port, struct uart_sunzilog_port, port);
|
|
|
|
up->flags |= SUNZILOG_FLAG_TX_STOPPED;
|
|
}
|
|
|
|
/* The port lock is held and interrupts are disabled. */
|
|
static void sunzilog_start_tx(struct uart_port *port)
|
|
{
|
|
struct uart_sunzilog_port *up =
|
|
container_of(port, struct uart_sunzilog_port, port);
|
|
struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
|
|
unsigned char status;
|
|
|
|
up->flags |= SUNZILOG_FLAG_TX_ACTIVE;
|
|
up->flags &= ~SUNZILOG_FLAG_TX_STOPPED;
|
|
|
|
status = readb(&channel->control);
|
|
ZSDELAY();
|
|
|
|
/* TX busy? Just wait for the TX done interrupt. */
|
|
if (!(status & Tx_BUF_EMP))
|
|
return;
|
|
|
|
/* Send the first character to jump-start the TX done
|
|
* IRQ sending engine.
|
|
*/
|
|
if (port->x_char) {
|
|
writeb(port->x_char, &channel->data);
|
|
ZSDELAY();
|
|
ZS_WSYNC(channel);
|
|
|
|
port->icount.tx++;
|
|
port->x_char = 0;
|
|
} else {
|
|
struct circ_buf *xmit = &port->state->xmit;
|
|
|
|
if (uart_circ_empty(xmit))
|
|
return;
|
|
writeb(xmit->buf[xmit->tail], &channel->data);
|
|
ZSDELAY();
|
|
ZS_WSYNC(channel);
|
|
|
|
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
|
port->icount.tx++;
|
|
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
uart_write_wakeup(&up->port);
|
|
}
|
|
}
|
|
|
|
/* The port lock is held. */
|
|
static void sunzilog_stop_rx(struct uart_port *port)
|
|
{
|
|
struct uart_sunzilog_port *up = UART_ZILOG(port);
|
|
struct zilog_channel __iomem *channel;
|
|
|
|
if (ZS_IS_CONS(up))
|
|
return;
|
|
|
|
channel = ZILOG_CHANNEL_FROM_PORT(port);
|
|
|
|
/* Disable all RX interrupts. */
|
|
up->curregs[R1] &= ~RxINT_MASK;
|
|
sunzilog_maybe_update_regs(up, channel);
|
|
}
|
|
|
|
/* The port lock is held. */
|
|
static void sunzilog_enable_ms(struct uart_port *port)
|
|
{
|
|
struct uart_sunzilog_port *up =
|
|
container_of(port, struct uart_sunzilog_port, port);
|
|
struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
|
|
unsigned char new_reg;
|
|
|
|
new_reg = up->curregs[R15] | (DCDIE | SYNCIE | CTSIE);
|
|
if (new_reg != up->curregs[R15]) {
|
|
up->curregs[R15] = new_reg;
|
|
|
|
/* NOTE: Not subject to 'transmitter active' rule. */
|
|
write_zsreg(channel, R15, up->curregs[R15] & ~WR7pEN);
|
|
}
|
|
}
|
|
|
|
/* The port lock is not held. */
|
|
static void sunzilog_break_ctl(struct uart_port *port, int break_state)
|
|
{
|
|
struct uart_sunzilog_port *up =
|
|
container_of(port, struct uart_sunzilog_port, port);
|
|
struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
|
|
unsigned char set_bits, clear_bits, new_reg;
|
|
unsigned long flags;
|
|
|
|
set_bits = clear_bits = 0;
|
|
|
|
if (break_state)
|
|
set_bits |= SND_BRK;
|
|
else
|
|
clear_bits |= SND_BRK;
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
|
|
new_reg = (up->curregs[R5] | set_bits) & ~clear_bits;
|
|
if (new_reg != up->curregs[R5]) {
|
|
up->curregs[R5] = new_reg;
|
|
|
|
/* NOTE: Not subject to 'transmitter active' rule. */
|
|
write_zsreg(channel, R5, up->curregs[R5]);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
}
|
|
|
|
static void __sunzilog_startup(struct uart_sunzilog_port *up)
|
|
{
|
|
struct zilog_channel __iomem *channel;
|
|
|
|
channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
|
|
up->prev_status = readb(&channel->control);
|
|
|
|
/* Enable receiver and transmitter. */
|
|
up->curregs[R3] |= RxENAB;
|
|
up->curregs[R5] |= TxENAB;
|
|
|
|
up->curregs[R1] |= EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB;
|
|
sunzilog_maybe_update_regs(up, channel);
|
|
}
|
|
|
|
static int sunzilog_startup(struct uart_port *port)
|
|
{
|
|
struct uart_sunzilog_port *up = UART_ZILOG(port);
|
|
unsigned long flags;
|
|
|
|
if (ZS_IS_CONS(up))
|
|
return 0;
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
__sunzilog_startup(up);
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The test for ZS_IS_CONS is explained by the following e-mail:
|
|
*****
|
|
* From: Russell King <rmk@arm.linux.org.uk>
|
|
* Date: Sun, 8 Dec 2002 10:18:38 +0000
|
|
*
|
|
* On Sun, Dec 08, 2002 at 02:43:36AM -0500, Pete Zaitcev wrote:
|
|
* > I boot my 2.5 boxes using "console=ttyS0,9600" argument,
|
|
* > and I noticed that something is not right with reference
|
|
* > counting in this case. It seems that when the console
|
|
* > is open by kernel initially, this is not accounted
|
|
* > as an open, and uart_startup is not called.
|
|
*
|
|
* That is correct. We are unable to call uart_startup when the serial
|
|
* console is initialised because it may need to allocate memory (as
|
|
* request_irq does) and the memory allocators may not have been
|
|
* initialised.
|
|
*
|
|
* 1. initialise the port into a state where it can send characters in the
|
|
* console write method.
|
|
*
|
|
* 2. don't do the actual hardware shutdown in your shutdown() method (but
|
|
* do the normal software shutdown - ie, free irqs etc)
|
|
*****
|
|
*/
|
|
static void sunzilog_shutdown(struct uart_port *port)
|
|
{
|
|
struct uart_sunzilog_port *up = UART_ZILOG(port);
|
|
struct zilog_channel __iomem *channel;
|
|
unsigned long flags;
|
|
|
|
if (ZS_IS_CONS(up))
|
|
return;
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
|
|
channel = ZILOG_CHANNEL_FROM_PORT(port);
|
|
|
|
/* Disable receiver and transmitter. */
|
|
up->curregs[R3] &= ~RxENAB;
|
|
up->curregs[R5] &= ~TxENAB;
|
|
|
|
/* Disable all interrupts and BRK assertion. */
|
|
up->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
|
|
up->curregs[R5] &= ~SND_BRK;
|
|
sunzilog_maybe_update_regs(up, channel);
|
|
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
}
|
|
|
|
/* Shared by TTY driver and serial console setup. The port lock is held
|
|
* and local interrupts are disabled.
|
|
*/
|
|
static void
|
|
sunzilog_convert_to_zs(struct uart_sunzilog_port *up, unsigned int cflag,
|
|
unsigned int iflag, int brg)
|
|
{
|
|
|
|
up->curregs[R10] = NRZ;
|
|
up->curregs[R11] = TCBR | RCBR;
|
|
|
|
/* Program BAUD and clock source. */
|
|
up->curregs[R4] &= ~XCLK_MASK;
|
|
up->curregs[R4] |= X16CLK;
|
|
up->curregs[R12] = brg & 0xff;
|
|
up->curregs[R13] = (brg >> 8) & 0xff;
|
|
up->curregs[R14] = BRSRC | BRENAB;
|
|
|
|
/* Character size, stop bits, and parity. */
|
|
up->curregs[R3] &= ~RxN_MASK;
|
|
up->curregs[R5] &= ~TxN_MASK;
|
|
switch (cflag & CSIZE) {
|
|
case CS5:
|
|
up->curregs[R3] |= Rx5;
|
|
up->curregs[R5] |= Tx5;
|
|
up->parity_mask = 0x1f;
|
|
break;
|
|
case CS6:
|
|
up->curregs[R3] |= Rx6;
|
|
up->curregs[R5] |= Tx6;
|
|
up->parity_mask = 0x3f;
|
|
break;
|
|
case CS7:
|
|
up->curregs[R3] |= Rx7;
|
|
up->curregs[R5] |= Tx7;
|
|
up->parity_mask = 0x7f;
|
|
break;
|
|
case CS8:
|
|
default:
|
|
up->curregs[R3] |= Rx8;
|
|
up->curregs[R5] |= Tx8;
|
|
up->parity_mask = 0xff;
|
|
break;
|
|
}
|
|
up->curregs[R4] &= ~0x0c;
|
|
if (cflag & CSTOPB)
|
|
up->curregs[R4] |= SB2;
|
|
else
|
|
up->curregs[R4] |= SB1;
|
|
if (cflag & PARENB)
|
|
up->curregs[R4] |= PAR_ENAB;
|
|
else
|
|
up->curregs[R4] &= ~PAR_ENAB;
|
|
if (!(cflag & PARODD))
|
|
up->curregs[R4] |= PAR_EVEN;
|
|
else
|
|
up->curregs[R4] &= ~PAR_EVEN;
|
|
|
|
up->port.read_status_mask = Rx_OVR;
|
|
if (iflag & INPCK)
|
|
up->port.read_status_mask |= CRC_ERR | PAR_ERR;
|
|
if (iflag & (IGNBRK | BRKINT | PARMRK))
|
|
up->port.read_status_mask |= BRK_ABRT;
|
|
|
|
up->port.ignore_status_mask = 0;
|
|
if (iflag & IGNPAR)
|
|
up->port.ignore_status_mask |= CRC_ERR | PAR_ERR;
|
|
if (iflag & IGNBRK) {
|
|
up->port.ignore_status_mask |= BRK_ABRT;
|
|
if (iflag & IGNPAR)
|
|
up->port.ignore_status_mask |= Rx_OVR;
|
|
}
|
|
|
|
if ((cflag & CREAD) == 0)
|
|
up->port.ignore_status_mask = 0xff;
|
|
}
|
|
|
|
/* The port lock is not held. */
|
|
static void
|
|
sunzilog_set_termios(struct uart_port *port, struct ktermios *termios,
|
|
struct ktermios *old)
|
|
{
|
|
struct uart_sunzilog_port *up =
|
|
container_of(port, struct uart_sunzilog_port, port);
|
|
unsigned long flags;
|
|
int baud, brg;
|
|
|
|
baud = uart_get_baud_rate(port, termios, old, 1200, 76800);
|
|
|
|
spin_lock_irqsave(&up->port.lock, flags);
|
|
|
|
brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
|
|
|
|
sunzilog_convert_to_zs(up, termios->c_cflag, termios->c_iflag, brg);
|
|
|
|
if (UART_ENABLE_MS(&up->port, termios->c_cflag))
|
|
up->flags |= SUNZILOG_FLAG_MODEM_STATUS;
|
|
else
|
|
up->flags &= ~SUNZILOG_FLAG_MODEM_STATUS;
|
|
|
|
up->cflag = termios->c_cflag;
|
|
|
|
sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(port));
|
|
|
|
uart_update_timeout(port, termios->c_cflag, baud);
|
|
|
|
spin_unlock_irqrestore(&up->port.lock, flags);
|
|
}
|
|
|
|
static const char *sunzilog_type(struct uart_port *port)
|
|
{
|
|
struct uart_sunzilog_port *up = UART_ZILOG(port);
|
|
|
|
return (up->flags & SUNZILOG_FLAG_ESCC) ? "zs (ESCC)" : "zs";
|
|
}
|
|
|
|
/* We do not request/release mappings of the registers here, this
|
|
* happens at early serial probe time.
|
|
*/
|
|
static void sunzilog_release_port(struct uart_port *port)
|
|
{
|
|
}
|
|
|
|
static int sunzilog_request_port(struct uart_port *port)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/* These do not need to do anything interesting either. */
|
|
static void sunzilog_config_port(struct uart_port *port, int flags)
|
|
{
|
|
}
|
|
|
|
/* We do not support letting the user mess with the divisor, IRQ, etc. */
|
|
static int sunzilog_verify_port(struct uart_port *port, struct serial_struct *ser)
|
|
{
|
|
return -EINVAL;
|
|
}
|
|
|
|
#ifdef CONFIG_CONSOLE_POLL
|
|
static int sunzilog_get_poll_char(struct uart_port *port)
|
|
{
|
|
unsigned char ch, r1;
|
|
struct uart_sunzilog_port *up =
|
|
container_of(port, struct uart_sunzilog_port, port);
|
|
struct zilog_channel __iomem *channel
|
|
= ZILOG_CHANNEL_FROM_PORT(&up->port);
|
|
|
|
|
|
r1 = read_zsreg(channel, R1);
|
|
if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) {
|
|
writeb(ERR_RES, &channel->control);
|
|
ZSDELAY();
|
|
ZS_WSYNC(channel);
|
|
}
|
|
|
|
ch = readb(&channel->control);
|
|
ZSDELAY();
|
|
|
|
/* This funny hack depends upon BRK_ABRT not interfering
|
|
* with the other bits we care about in R1.
|
|
*/
|
|
if (ch & BRK_ABRT)
|
|
r1 |= BRK_ABRT;
|
|
|
|
if (!(ch & Rx_CH_AV))
|
|
return NO_POLL_CHAR;
|
|
|
|
ch = readb(&channel->data);
|
|
ZSDELAY();
|
|
|
|
ch &= up->parity_mask;
|
|
return ch;
|
|
}
|
|
|
|
static void sunzilog_put_poll_char(struct uart_port *port,
|
|
unsigned char ch)
|
|
{
|
|
struct uart_sunzilog_port *up =
|
|
container_of(port, struct uart_sunzilog_port, port);
|
|
|
|
sunzilog_putchar(&up->port, ch);
|
|
}
|
|
#endif /* CONFIG_CONSOLE_POLL */
|
|
|
|
static const struct uart_ops sunzilog_pops = {
|
|
.tx_empty = sunzilog_tx_empty,
|
|
.set_mctrl = sunzilog_set_mctrl,
|
|
.get_mctrl = sunzilog_get_mctrl,
|
|
.stop_tx = sunzilog_stop_tx,
|
|
.start_tx = sunzilog_start_tx,
|
|
.stop_rx = sunzilog_stop_rx,
|
|
.enable_ms = sunzilog_enable_ms,
|
|
.break_ctl = sunzilog_break_ctl,
|
|
.startup = sunzilog_startup,
|
|
.shutdown = sunzilog_shutdown,
|
|
.set_termios = sunzilog_set_termios,
|
|
.type = sunzilog_type,
|
|
.release_port = sunzilog_release_port,
|
|
.request_port = sunzilog_request_port,
|
|
.config_port = sunzilog_config_port,
|
|
.verify_port = sunzilog_verify_port,
|
|
#ifdef CONFIG_CONSOLE_POLL
|
|
.poll_get_char = sunzilog_get_poll_char,
|
|
.poll_put_char = sunzilog_put_poll_char,
|
|
#endif
|
|
};
|
|
|
|
static int uart_chip_count;
|
|
static struct uart_sunzilog_port *sunzilog_port_table;
|
|
static struct zilog_layout __iomem **sunzilog_chip_regs;
|
|
|
|
static struct uart_sunzilog_port *sunzilog_irq_chain;
|
|
|
|
static struct uart_driver sunzilog_reg = {
|
|
.owner = THIS_MODULE,
|
|
.driver_name = "sunzilog",
|
|
.dev_name = "ttyS",
|
|
.major = TTY_MAJOR,
|
|
};
|
|
|
|
static int __init sunzilog_alloc_tables(int num_sunzilog)
|
|
{
|
|
struct uart_sunzilog_port *up;
|
|
unsigned long size;
|
|
int num_channels = num_sunzilog * 2;
|
|
int i;
|
|
|
|
size = num_channels * sizeof(struct uart_sunzilog_port);
|
|
sunzilog_port_table = kzalloc(size, GFP_KERNEL);
|
|
if (!sunzilog_port_table)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < num_channels; i++) {
|
|
up = &sunzilog_port_table[i];
|
|
|
|
spin_lock_init(&up->port.lock);
|
|
|
|
if (i == 0)
|
|
sunzilog_irq_chain = up;
|
|
|
|
if (i < num_channels - 1)
|
|
up->next = up + 1;
|
|
else
|
|
up->next = NULL;
|
|
}
|
|
|
|
size = num_sunzilog * sizeof(struct zilog_layout __iomem *);
|
|
sunzilog_chip_regs = kzalloc(size, GFP_KERNEL);
|
|
if (!sunzilog_chip_regs) {
|
|
kfree(sunzilog_port_table);
|
|
sunzilog_irq_chain = NULL;
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sunzilog_free_tables(void)
|
|
{
|
|
kfree(sunzilog_port_table);
|
|
sunzilog_irq_chain = NULL;
|
|
kfree(sunzilog_chip_regs);
|
|
}
|
|
|
|
#define ZS_PUT_CHAR_MAX_DELAY 2000 /* 10 ms */
|
|
|
|
static void sunzilog_putchar(struct uart_port *port, int ch)
|
|
{
|
|
struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
|
|
int loops = ZS_PUT_CHAR_MAX_DELAY;
|
|
|
|
/* This is a timed polling loop so do not switch the explicit
|
|
* udelay with ZSDELAY as that is a NOP on some platforms. -DaveM
|
|
*/
|
|
do {
|
|
unsigned char val = readb(&channel->control);
|
|
if (val & Tx_BUF_EMP) {
|
|
ZSDELAY();
|
|
break;
|
|
}
|
|
udelay(5);
|
|
} while (--loops);
|
|
|
|
writeb(ch, &channel->data);
|
|
ZSDELAY();
|
|
ZS_WSYNC(channel);
|
|
}
|
|
|
|
#ifdef CONFIG_SERIO
|
|
|
|
static DEFINE_SPINLOCK(sunzilog_serio_lock);
|
|
|
|
static int sunzilog_serio_write(struct serio *serio, unsigned char ch)
|
|
{
|
|
struct uart_sunzilog_port *up = serio->port_data;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&sunzilog_serio_lock, flags);
|
|
|
|
sunzilog_putchar(&up->port, ch);
|
|
|
|
spin_unlock_irqrestore(&sunzilog_serio_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sunzilog_serio_open(struct serio *serio)
|
|
{
|
|
struct uart_sunzilog_port *up = serio->port_data;
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
spin_lock_irqsave(&sunzilog_serio_lock, flags);
|
|
if (!up->serio_open) {
|
|
up->serio_open = 1;
|
|
ret = 0;
|
|
} else
|
|
ret = -EBUSY;
|
|
spin_unlock_irqrestore(&sunzilog_serio_lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void sunzilog_serio_close(struct serio *serio)
|
|
{
|
|
struct uart_sunzilog_port *up = serio->port_data;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&sunzilog_serio_lock, flags);
|
|
up->serio_open = 0;
|
|
spin_unlock_irqrestore(&sunzilog_serio_lock, flags);
|
|
}
|
|
|
|
#endif /* CONFIG_SERIO */
|
|
|
|
#ifdef CONFIG_SERIAL_SUNZILOG_CONSOLE
|
|
static void
|
|
sunzilog_console_write(struct console *con, const char *s, unsigned int count)
|
|
{
|
|
struct uart_sunzilog_port *up = &sunzilog_port_table[con->index];
|
|
unsigned long flags;
|
|
int locked = 1;
|
|
|
|
if (up->port.sysrq || oops_in_progress)
|
|
locked = spin_trylock_irqsave(&up->port.lock, flags);
|
|
else
|
|
spin_lock_irqsave(&up->port.lock, flags);
|
|
|
|
uart_console_write(&up->port, s, count, sunzilog_putchar);
|
|
udelay(2);
|
|
|
|
if (locked)
|
|
spin_unlock_irqrestore(&up->port.lock, flags);
|
|
}
|
|
|
|
static int __init sunzilog_console_setup(struct console *con, char *options)
|
|
{
|
|
struct uart_sunzilog_port *up = &sunzilog_port_table[con->index];
|
|
unsigned long flags;
|
|
int baud, brg;
|
|
|
|
if (up->port.type != PORT_SUNZILOG)
|
|
return -1;
|
|
|
|
printk(KERN_INFO "Console: ttyS%d (SunZilog zs%d)\n",
|
|
(sunzilog_reg.minor - 64) + con->index, con->index);
|
|
|
|
/* Get firmware console settings. */
|
|
sunserial_console_termios(con, up->port.dev->of_node);
|
|
|
|
/* Firmware console speed is limited to 150-->38400 baud so
|
|
* this hackish cflag thing is OK.
|
|
*/
|
|
switch (con->cflag & CBAUD) {
|
|
case B150: baud = 150; break;
|
|
case B300: baud = 300; break;
|
|
case B600: baud = 600; break;
|
|
case B1200: baud = 1200; break;
|
|
case B2400: baud = 2400; break;
|
|
case B4800: baud = 4800; break;
|
|
default: case B9600: baud = 9600; break;
|
|
case B19200: baud = 19200; break;
|
|
case B38400: baud = 38400; break;
|
|
}
|
|
|
|
brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
|
|
|
|
spin_lock_irqsave(&up->port.lock, flags);
|
|
|
|
up->curregs[R15] |= BRKIE;
|
|
sunzilog_convert_to_zs(up, con->cflag, 0, brg);
|
|
|
|
sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
|
|
__sunzilog_startup(up);
|
|
|
|
spin_unlock_irqrestore(&up->port.lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct console sunzilog_console_ops = {
|
|
.name = "ttyS",
|
|
.write = sunzilog_console_write,
|
|
.device = uart_console_device,
|
|
.setup = sunzilog_console_setup,
|
|
.flags = CON_PRINTBUFFER,
|
|
.index = -1,
|
|
.data = &sunzilog_reg,
|
|
};
|
|
|
|
static inline struct console *SUNZILOG_CONSOLE(void)
|
|
{
|
|
return &sunzilog_console_ops;
|
|
}
|
|
|
|
#else
|
|
#define SUNZILOG_CONSOLE() (NULL)
|
|
#endif
|
|
|
|
static void sunzilog_init_kbdms(struct uart_sunzilog_port *up)
|
|
{
|
|
int baud, brg;
|
|
|
|
if (up->flags & SUNZILOG_FLAG_CONS_KEYB) {
|
|
up->cflag = B1200 | CS8 | CLOCAL | CREAD;
|
|
baud = 1200;
|
|
} else {
|
|
up->cflag = B4800 | CS8 | CLOCAL | CREAD;
|
|
baud = 4800;
|
|
}
|
|
|
|
up->curregs[R15] |= BRKIE;
|
|
brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
|
|
sunzilog_convert_to_zs(up, up->cflag, 0, brg);
|
|
sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
|
|
__sunzilog_startup(up);
|
|
}
|
|
|
|
#ifdef CONFIG_SERIO
|
|
static void sunzilog_register_serio(struct uart_sunzilog_port *up)
|
|
{
|
|
struct serio *serio = &up->serio;
|
|
|
|
serio->port_data = up;
|
|
|
|
serio->id.type = SERIO_RS232;
|
|
if (up->flags & SUNZILOG_FLAG_CONS_KEYB) {
|
|
serio->id.proto = SERIO_SUNKBD;
|
|
strlcpy(serio->name, "zskbd", sizeof(serio->name));
|
|
} else {
|
|
serio->id.proto = SERIO_SUN;
|
|
serio->id.extra = 1;
|
|
strlcpy(serio->name, "zsms", sizeof(serio->name));
|
|
}
|
|
strlcpy(serio->phys,
|
|
((up->flags & SUNZILOG_FLAG_CONS_KEYB) ?
|
|
"zs/serio0" : "zs/serio1"),
|
|
sizeof(serio->phys));
|
|
|
|
serio->write = sunzilog_serio_write;
|
|
serio->open = sunzilog_serio_open;
|
|
serio->close = sunzilog_serio_close;
|
|
serio->dev.parent = up->port.dev;
|
|
|
|
serio_register_port(serio);
|
|
}
|
|
#endif
|
|
|
|
static void sunzilog_init_hw(struct uart_sunzilog_port *up)
|
|
{
|
|
struct zilog_channel __iomem *channel;
|
|
unsigned long flags;
|
|
int baud, brg;
|
|
|
|
channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
|
|
|
|
spin_lock_irqsave(&up->port.lock, flags);
|
|
if (ZS_IS_CHANNEL_A(up)) {
|
|
write_zsreg(channel, R9, FHWRES);
|
|
ZSDELAY_LONG();
|
|
(void) read_zsreg(channel, R0);
|
|
}
|
|
|
|
if (up->flags & (SUNZILOG_FLAG_CONS_KEYB |
|
|
SUNZILOG_FLAG_CONS_MOUSE)) {
|
|
up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB;
|
|
up->curregs[R4] = PAR_EVEN | X16CLK | SB1;
|
|
up->curregs[R3] = RxENAB | Rx8;
|
|
up->curregs[R5] = TxENAB | Tx8;
|
|
up->curregs[R6] = 0x00; /* SDLC Address */
|
|
up->curregs[R7] = 0x7E; /* SDLC Flag */
|
|
up->curregs[R9] = NV;
|
|
up->curregs[R7p] = 0x00;
|
|
sunzilog_init_kbdms(up);
|
|
/* Only enable interrupts if an ISR handler available */
|
|
if (up->flags & SUNZILOG_FLAG_ISR_HANDLER)
|
|
up->curregs[R9] |= MIE;
|
|
write_zsreg(channel, R9, up->curregs[R9]);
|
|
} else {
|
|
/* Normal serial TTY. */
|
|
up->parity_mask = 0xff;
|
|
up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB;
|
|
up->curregs[R4] = PAR_EVEN | X16CLK | SB1;
|
|
up->curregs[R3] = RxENAB | Rx8;
|
|
up->curregs[R5] = TxENAB | Tx8;
|
|
up->curregs[R6] = 0x00; /* SDLC Address */
|
|
up->curregs[R7] = 0x7E; /* SDLC Flag */
|
|
up->curregs[R9] = NV;
|
|
up->curregs[R10] = NRZ;
|
|
up->curregs[R11] = TCBR | RCBR;
|
|
baud = 9600;
|
|
brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
|
|
up->curregs[R12] = (brg & 0xff);
|
|
up->curregs[R13] = (brg >> 8) & 0xff;
|
|
up->curregs[R14] = BRSRC | BRENAB;
|
|
up->curregs[R15] = FIFOEN; /* Use FIFO if on ESCC */
|
|
up->curregs[R7p] = TxFIFO_LVL | RxFIFO_LVL;
|
|
if (__load_zsregs(channel, up->curregs)) {
|
|
up->flags |= SUNZILOG_FLAG_ESCC;
|
|
}
|
|
/* Only enable interrupts if an ISR handler available */
|
|
if (up->flags & SUNZILOG_FLAG_ISR_HANDLER)
|
|
up->curregs[R9] |= MIE;
|
|
write_zsreg(channel, R9, up->curregs[R9]);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&up->port.lock, flags);
|
|
|
|
#ifdef CONFIG_SERIO
|
|
if (up->flags & (SUNZILOG_FLAG_CONS_KEYB |
|
|
SUNZILOG_FLAG_CONS_MOUSE))
|
|
sunzilog_register_serio(up);
|
|
#endif
|
|
}
|
|
|
|
static int zilog_irq;
|
|
|
|
static int zs_probe(struct platform_device *op)
|
|
{
|
|
static int kbm_inst, uart_inst;
|
|
int inst;
|
|
struct uart_sunzilog_port *up;
|
|
struct zilog_layout __iomem *rp;
|
|
int keyboard_mouse = 0;
|
|
int err;
|
|
|
|
if (of_find_property(op->dev.of_node, "keyboard", NULL))
|
|
keyboard_mouse = 1;
|
|
|
|
/* uarts must come before keyboards/mice */
|
|
if (keyboard_mouse)
|
|
inst = uart_chip_count + kbm_inst;
|
|
else
|
|
inst = uart_inst;
|
|
|
|
sunzilog_chip_regs[inst] = of_ioremap(&op->resource[0], 0,
|
|
sizeof(struct zilog_layout),
|
|
"zs");
|
|
if (!sunzilog_chip_regs[inst])
|
|
return -ENOMEM;
|
|
|
|
rp = sunzilog_chip_regs[inst];
|
|
|
|
if (!zilog_irq)
|
|
zilog_irq = op->archdata.irqs[0];
|
|
|
|
up = &sunzilog_port_table[inst * 2];
|
|
|
|
/* Channel A */
|
|
up[0].port.mapbase = op->resource[0].start + 0x00;
|
|
up[0].port.membase = (void __iomem *) &rp->channelA;
|
|
up[0].port.iotype = UPIO_MEM;
|
|
up[0].port.irq = op->archdata.irqs[0];
|
|
up[0].port.uartclk = ZS_CLOCK;
|
|
up[0].port.fifosize = 1;
|
|
up[0].port.ops = &sunzilog_pops;
|
|
up[0].port.type = PORT_SUNZILOG;
|
|
up[0].port.flags = 0;
|
|
up[0].port.line = (inst * 2) + 0;
|
|
up[0].port.dev = &op->dev;
|
|
up[0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A;
|
|
if (keyboard_mouse)
|
|
up[0].flags |= SUNZILOG_FLAG_CONS_KEYB;
|
|
sunzilog_init_hw(&up[0]);
|
|
|
|
/* Channel B */
|
|
up[1].port.mapbase = op->resource[0].start + 0x04;
|
|
up[1].port.membase = (void __iomem *) &rp->channelB;
|
|
up[1].port.iotype = UPIO_MEM;
|
|
up[1].port.irq = op->archdata.irqs[0];
|
|
up[1].port.uartclk = ZS_CLOCK;
|
|
up[1].port.fifosize = 1;
|
|
up[1].port.ops = &sunzilog_pops;
|
|
up[1].port.type = PORT_SUNZILOG;
|
|
up[1].port.flags = 0;
|
|
up[1].port.line = (inst * 2) + 1;
|
|
up[1].port.dev = &op->dev;
|
|
up[1].flags |= 0;
|
|
if (keyboard_mouse)
|
|
up[1].flags |= SUNZILOG_FLAG_CONS_MOUSE;
|
|
sunzilog_init_hw(&up[1]);
|
|
|
|
if (!keyboard_mouse) {
|
|
if (sunserial_console_match(SUNZILOG_CONSOLE(), op->dev.of_node,
|
|
&sunzilog_reg, up[0].port.line,
|
|
false))
|
|
up->flags |= SUNZILOG_FLAG_IS_CONS;
|
|
err = uart_add_one_port(&sunzilog_reg, &up[0].port);
|
|
if (err) {
|
|
of_iounmap(&op->resource[0],
|
|
rp, sizeof(struct zilog_layout));
|
|
return err;
|
|
}
|
|
if (sunserial_console_match(SUNZILOG_CONSOLE(), op->dev.of_node,
|
|
&sunzilog_reg, up[1].port.line,
|
|
false))
|
|
up->flags |= SUNZILOG_FLAG_IS_CONS;
|
|
err = uart_add_one_port(&sunzilog_reg, &up[1].port);
|
|
if (err) {
|
|
uart_remove_one_port(&sunzilog_reg, &up[0].port);
|
|
of_iounmap(&op->resource[0],
|
|
rp, sizeof(struct zilog_layout));
|
|
return err;
|
|
}
|
|
uart_inst++;
|
|
} else {
|
|
printk(KERN_INFO "%s: Keyboard at MMIO 0x%llx (irq = %d) "
|
|
"is a %s\n",
|
|
dev_name(&op->dev),
|
|
(unsigned long long) up[0].port.mapbase,
|
|
op->archdata.irqs[0], sunzilog_type(&up[0].port));
|
|
printk(KERN_INFO "%s: Mouse at MMIO 0x%llx (irq = %d) "
|
|
"is a %s\n",
|
|
dev_name(&op->dev),
|
|
(unsigned long long) up[1].port.mapbase,
|
|
op->archdata.irqs[0], sunzilog_type(&up[1].port));
|
|
kbm_inst++;
|
|
}
|
|
|
|
platform_set_drvdata(op, &up[0]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void zs_remove_one(struct uart_sunzilog_port *up)
|
|
{
|
|
if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up)) {
|
|
#ifdef CONFIG_SERIO
|
|
serio_unregister_port(&up->serio);
|
|
#endif
|
|
} else
|
|
uart_remove_one_port(&sunzilog_reg, &up->port);
|
|
}
|
|
|
|
static int zs_remove(struct platform_device *op)
|
|
{
|
|
struct uart_sunzilog_port *up = platform_get_drvdata(op);
|
|
struct zilog_layout __iomem *regs;
|
|
|
|
zs_remove_one(&up[0]);
|
|
zs_remove_one(&up[1]);
|
|
|
|
regs = sunzilog_chip_regs[up[0].port.line / 2];
|
|
of_iounmap(&op->resource[0], regs, sizeof(struct zilog_layout));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id zs_match[] = {
|
|
{
|
|
.name = "zs",
|
|
},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, zs_match);
|
|
|
|
static struct platform_driver zs_driver = {
|
|
.driver = {
|
|
.name = "zs",
|
|
.of_match_table = zs_match,
|
|
},
|
|
.probe = zs_probe,
|
|
.remove = zs_remove,
|
|
};
|
|
|
|
static int __init sunzilog_init(void)
|
|
{
|
|
struct device_node *dp;
|
|
int err;
|
|
int num_keybms = 0;
|
|
int num_sunzilog = 0;
|
|
|
|
for_each_node_by_name(dp, "zs") {
|
|
num_sunzilog++;
|
|
if (of_find_property(dp, "keyboard", NULL))
|
|
num_keybms++;
|
|
}
|
|
|
|
if (num_sunzilog) {
|
|
err = sunzilog_alloc_tables(num_sunzilog);
|
|
if (err)
|
|
goto out;
|
|
|
|
uart_chip_count = num_sunzilog - num_keybms;
|
|
|
|
err = sunserial_register_minors(&sunzilog_reg,
|
|
uart_chip_count * 2);
|
|
if (err)
|
|
goto out_free_tables;
|
|
}
|
|
|
|
err = platform_driver_register(&zs_driver);
|
|
if (err)
|
|
goto out_unregister_uart;
|
|
|
|
if (zilog_irq) {
|
|
struct uart_sunzilog_port *up = sunzilog_irq_chain;
|
|
err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED,
|
|
"zs", sunzilog_irq_chain);
|
|
if (err)
|
|
goto out_unregister_driver;
|
|
|
|
/* Enable Interrupts */
|
|
while (up) {
|
|
struct zilog_channel __iomem *channel;
|
|
|
|
/* printk (KERN_INFO "Enable IRQ for ZILOG Hardware %p\n", up); */
|
|
channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
|
|
up->flags |= SUNZILOG_FLAG_ISR_HANDLER;
|
|
up->curregs[R9] |= MIE;
|
|
write_zsreg(channel, R9, up->curregs[R9]);
|
|
up = up->next;
|
|
}
|
|
}
|
|
|
|
out:
|
|
return err;
|
|
|
|
out_unregister_driver:
|
|
platform_driver_unregister(&zs_driver);
|
|
|
|
out_unregister_uart:
|
|
if (num_sunzilog) {
|
|
sunserial_unregister_minors(&sunzilog_reg, num_sunzilog);
|
|
sunzilog_reg.cons = NULL;
|
|
}
|
|
|
|
out_free_tables:
|
|
sunzilog_free_tables();
|
|
goto out;
|
|
}
|
|
|
|
static void __exit sunzilog_exit(void)
|
|
{
|
|
platform_driver_unregister(&zs_driver);
|
|
|
|
if (zilog_irq) {
|
|
struct uart_sunzilog_port *up = sunzilog_irq_chain;
|
|
|
|
/* Disable Interrupts */
|
|
while (up) {
|
|
struct zilog_channel __iomem *channel;
|
|
|
|
/* printk (KERN_INFO "Disable IRQ for ZILOG Hardware %p\n", up); */
|
|
channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
|
|
up->flags &= ~SUNZILOG_FLAG_ISR_HANDLER;
|
|
up->curregs[R9] &= ~MIE;
|
|
write_zsreg(channel, R9, up->curregs[R9]);
|
|
up = up->next;
|
|
}
|
|
|
|
free_irq(zilog_irq, sunzilog_irq_chain);
|
|
zilog_irq = 0;
|
|
}
|
|
|
|
if (sunzilog_reg.nr) {
|
|
sunserial_unregister_minors(&sunzilog_reg, sunzilog_reg.nr);
|
|
sunzilog_free_tables();
|
|
}
|
|
}
|
|
|
|
module_init(sunzilog_init);
|
|
module_exit(sunzilog_exit);
|
|
|
|
MODULE_AUTHOR("David S. Miller");
|
|
MODULE_DESCRIPTION("Sun Zilog serial port driver");
|
|
MODULE_VERSION("2.0");
|
|
MODULE_LICENSE("GPL");
|