linux-hardened/drivers/net/wireless/ath/ath9k
Ben Greear 60f2d1d506 ath9k: Restart xmit logic in xmit watchdog.
The system can get into a state where the xmit queue
is stopped, but there are no packets pending, so
the queue will not be restarted.

Add logic to the xmit watchdog to attempt to restart
the xmit logic if this situation is detected.

Example 'dmesg' output:

ath: txq: f4e723e0 axq_qnum: 2, mac80211_qnum: 2 axq_link: f4e996c8 pending frames: 1 axq_acq empty: 1 stopped: 0 axq_depth: 0  Attempting to restart tx logic.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-21 15:34:17 -05:00
..
ahb.c ath: Convert ath_print(.., ATH_DBG_FATAL to ath_err 2010-12-07 16:34:47 -05:00
ani.c ath9k_hw: Disable MRC CCK for AR9485 2010-12-07 16:54:23 -05:00
ani.h ath9k_hw: move the cycle counter tracking to ath 2010-10-11 15:04:20 -04:00
ar5008_initvals.h
ar5008_phy.c ath9k_hw: remove baseband rfsilent support 2010-12-20 14:49:48 -05:00
ar9001_initvals.h
ar9002_calib.c ath9k_hw: fix carrier leakage calibration for AR9271 2011-01-19 11:36:10 -05:00
ar9002_hw.c ath9k: correct MODULE_PARM_DESC parameters for force_new_ani 2011-01-05 14:36:33 -05:00
ar9002_initvals.h
ar9002_mac.c ath9k_hw: remove ah->txpower_indexoffset 2010-12-13 15:23:32 -05:00
ar9002_phy.c ath9k: fix spur mitigation no-spur case for AR9002 2011-01-04 14:35:12 -05:00
ar9002_phy.h
ar9003_2p2_initvals.h ath9k_hw: update AR9003 initvals to improve carrier leak calibration/correction 2010-12-13 15:23:33 -05:00
ar9003_calib.c ath9k_hw: Tx IQ cal changes for AR9003 2010-12-16 15:22:30 -05:00
ar9003_eeprom.c Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem 2011-01-05 16:06:25 -05:00
ar9003_eeprom.h ath9k_hw: Add a helper to get paprd scale factor 2010-12-16 15:22:30 -05:00
ar9003_hw.c ath9k_hw: clean up SREV version checks 2010-12-13 15:23:31 -05:00
ar9003_mac.c ath9k_hw: partially revert "fix dma descriptor rx error bit parsing" 2011-01-19 11:36:09 -05:00
ar9003_mac.h ath9k_hw: optimize all descriptor access functions 2010-11-09 16:13:25 -05:00
ar9003_paprd.c ath9k_hw: fix PA predistortion HT40 mask 2010-12-20 14:52:18 -05:00
ar9003_phy.c ath9k_hw: remove baseband rfsilent support 2010-12-20 14:49:48 -05:00
ar9003_phy.h ath9k_hw: fix PA predistortion training power selection 2010-12-13 15:23:33 -05:00
ar9485_initvals.h ath9k_hw: Add initvals.h for AR9485 2010-12-07 16:34:50 -05:00
ath9k.h ath9k: Restart xmit logic in xmit watchdog. 2011-01-21 15:34:17 -05:00
beacon.c ath9k: Fix up hardware mode and beacons with multiple vifs. 2011-01-19 11:36:11 -05:00
btcoex.c ath9k: Remove code which enables btcoex based on subsys id 2010-11-29 15:24:36 -05:00
btcoex.h ath9k: Remove code which enables btcoex based on subsys id 2010-11-29 15:24:36 -05:00
calib.c ath9k: preserve caldata history buffer across scanning 2011-01-19 11:36:10 -05:00
calib.h ath9k_hw: clean up calibration flags 2010-10-06 16:26:01 -04:00
common.c ath: Convert ath_print to ath_dbg 2010-12-07 16:34:48 -05:00
common.h ath: Convert ath_print to ath_dbg 2010-12-07 16:34:48 -05:00
debug.c ath9k: Restart xmit logic in xmit watchdog. 2011-01-21 15:34:17 -05:00
debug.h ath9k: Add counters to distinquish AMPDU enqueues. 2011-01-21 15:32:22 -05:00
eeprom.c ath9k_hw: Offload USB eeprom reading to target 2011-01-19 11:36:06 -05:00
eeprom.h ath9k_hw: Offload USB eeprom reading to target 2011-01-19 11:36:06 -05:00
eeprom_4k.c ath9k_hw: Offload USB eeprom reading to target 2011-01-19 11:36:06 -05:00
eeprom_9287.c ath9k_hw: Offload USB eeprom reading to target 2011-01-19 11:36:06 -05:00
eeprom_def.c ath9k_hw: Offload USB eeprom reading to target 2011-01-19 11:36:06 -05:00
gpio.c ath: Convert ath_print to ath_dbg 2010-12-07 16:34:48 -05:00
hif_usb.c ath9k_htc: Handle pending URBs properly 2011-01-04 14:42:59 -05:00
hif_usb.h ath9k_htc: Handle pending URBs properly 2011-01-04 14:42:59 -05:00
htc.h ath9k_htc: keep calibrated noise floor value for oper channel 2011-01-19 11:36:10 -05:00
htc_drv_beacon.c ath: Convert ath_print to ath_dbg 2010-12-07 16:34:48 -05:00
htc_drv_gpio.c ath9k_htc: Move LED/RFKILL code to htc_drv_gpio.c 2011-01-04 14:43:00 -05:00
htc_drv_init.c ath9k_htc: Add multiple register read API 2011-01-19 11:36:06 -05:00
htc_drv_main.c mac80211: track receiver's aggregation reorder buffer size 2011-01-19 11:36:11 -05:00
htc_drv_txrx.c mac80211: Add timeout to BA session start API 2010-12-15 17:03:59 -05:00
htc_hst.c ath9k_htc: Identify devices using driver_info 2010-11-24 16:19:41 -05:00
htc_hst.h ath9k_htc: Remove unused structures 2010-12-02 15:16:48 -05:00
hw-ops.h ath9k_hw: remove baseband rfsilent support 2010-12-20 14:49:48 -05:00
hw.c ath9k_hw: Fix RX handling for USB devices 2011-01-10 15:40:51 -05:00
hw.h ath9k_htc: Add multiple register read API 2011-01-19 11:36:06 -05:00
init.c ath9k: Restart xmit logic in xmit watchdog. 2011-01-21 15:34:17 -05:00
Kconfig ath9k: make the driver specific rate control module optional 2010-09-21 11:05:35 -04:00
mac.c ath9k: Add more information to debugfs xmit file. 2011-01-21 15:32:22 -05:00
mac.h ath9k_hw: remove ath9k_hw_stoppcurecv 2010-11-24 16:19:41 -05:00
main.c ath9k: Keep track of stations for debugfs. 2011-01-21 15:32:22 -05:00
Makefile ath9k: make the driver specific rate control module optional 2010-09-21 11:05:35 -04:00
pci.c ath9k: Reset keycache on resume 2010-12-22 15:44:22 -05:00
phy.h ath9k_hw: Find chansel of AR_PHY_65NM_CH0_SYNTH7 for AR9485 2010-12-07 16:34:55 -05:00
rc.c ath9k : few rate control clean ups 2011-01-04 14:46:13 -05:00
rc.h ath9k : few rate control clean ups 2011-01-04 14:46:13 -05:00
recv.c ath9k: Fix up hardware mode and beacons with multiple vifs. 2011-01-19 11:36:11 -05:00
reg.h Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2010-12-08 13:47:38 -08:00
virtual.c ath9k: Fix up hardware mode and beacons with multiple vifs. 2011-01-19 11:36:11 -05:00
wmi.c ath9k_htc: Handle FATAL events 2011-01-04 14:43:00 -05:00
wmi.h ath9k_htc: Handle FATAL events 2011-01-04 14:43:00 -05:00
xmit.c ath9k: Restart xmit logic in xmit watchdog. 2011-01-21 15:34:17 -05:00