linux-hardened/include/linux/mod_devicetable.h
Martin Schwidefsky 1534c3820c [S390] zcrypt adjunct processor bus.
Add a bus for the adjunct processor interface. Up to 64 devices can
be connect to the ap bus interface, each device with 16 domains. That
makes 1024 message queues. The interface is asynchronous, the answer
to a message sent to a queue needs to be received at some later point
in time. Unfortunately the interface does not provide interrupts when
a message reply is pending. So the ap bus needs to implement some
fancy polling, each active queue is polled once per 1/HZ second or
continuously if an idle cpus exsists and the poll thread is activ
(see poll_thread parameter).

The ap bus uses the sysfs path /sys/bus/ap and has two bus attributes,
ap_domain and config_time. The ap_domain selects one of the 16 domains
to be used for this system. This limits the maximum number of ap devices
to 64. The config_time attribute contains the number of seconds between
two ap bus scans to find new devices.

The ap bus uses the modalias entries of the form "ap:tN" to autoload
the ap driver for hardware type N. Currently known types are:
3 - PCICC, 4 - PCICA, 5 - PCIXCC, 6 - CEX2A and 7 - CEX2C.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-20 15:58:25 +02:00

311 lines
9.1 KiB
C

/*
* Device tables which are exported to userspace via
* scripts/mod/file2alias.c. You must keep that file in sync with this
* header.
*/
#ifndef LINUX_MOD_DEVICETABLE_H
#define LINUX_MOD_DEVICETABLE_H
#ifdef __KERNEL__
#include <linux/types.h>
typedef unsigned long kernel_ulong_t;
#endif
#define PCI_ANY_ID (~0)
struct pci_device_id {
__u32 vendor, device; /* Vendor and device ID or PCI_ANY_ID*/
__u32 subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */
__u32 class, class_mask; /* (class,subclass,prog-if) triplet */
kernel_ulong_t driver_data; /* Data private to the driver */
};
#define IEEE1394_MATCH_VENDOR_ID 0x0001
#define IEEE1394_MATCH_MODEL_ID 0x0002
#define IEEE1394_MATCH_SPECIFIER_ID 0x0004
#define IEEE1394_MATCH_VERSION 0x0008
struct ieee1394_device_id {
__u32 match_flags;
__u32 vendor_id;
__u32 model_id;
__u32 specifier_id;
__u32 version;
kernel_ulong_t driver_data
__attribute__((aligned(sizeof(kernel_ulong_t))));
};
/*
* Device table entry for "new style" table-driven USB drivers.
* User mode code can read these tables to choose which modules to load.
* Declare the table as a MODULE_DEVICE_TABLE.
*
* A probe() parameter will point to a matching entry from this table.
* Use the driver_info field for each match to hold information tied
* to that match: device quirks, etc.
*
* Terminate the driver's table with an all-zeroes entry.
* Use the flag values to control which fields are compared.
*/
/**
* struct usb_device_id - identifies USB devices for probing and hotplugging
* @match_flags: Bit mask controlling of the other fields are used to match
* against new devices. Any field except for driver_info may be used,
* although some only make sense in conjunction with other fields.
* This is usually set by a USB_DEVICE_*() macro, which sets all
* other fields in this structure except for driver_info.
* @idVendor: USB vendor ID for a device; numbers are assigned
* by the USB forum to its members.
* @idProduct: Vendor-assigned product ID.
* @bcdDevice_lo: Low end of range of vendor-assigned product version numbers.
* This is also used to identify individual product versions, for
* a range consisting of a single device.
* @bcdDevice_hi: High end of version number range. The range of product
* versions is inclusive.
* @bDeviceClass: Class of device; numbers are assigned
* by the USB forum. Products may choose to implement classes,
* or be vendor-specific. Device classes specify behavior of all
* the interfaces on a devices.
* @bDeviceSubClass: Subclass of device; associated with bDeviceClass.
* @bDeviceProtocol: Protocol of device; associated with bDeviceClass.
* @bInterfaceClass: Class of interface; numbers are assigned
* by the USB forum. Products may choose to implement classes,
* or be vendor-specific. Interface classes specify behavior only
* of a given interface; other interfaces may support other classes.
* @bInterfaceSubClass: Subclass of interface; associated with bInterfaceClass.
* @bInterfaceProtocol: Protocol of interface; associated with bInterfaceClass.
* @driver_info: Holds information used by the driver. Usually it holds
* a pointer to a descriptor understood by the driver, or perhaps
* device flags.
*
* In most cases, drivers will create a table of device IDs by using
* USB_DEVICE(), or similar macros designed for that purpose.
* They will then export it to userspace using MODULE_DEVICE_TABLE(),
* and provide it to the USB core through their usb_driver structure.
*
* See the usb_match_id() function for information about how matches are
* performed. Briefly, you will normally use one of several macros to help
* construct these entries. Each entry you provide will either identify
* one or more specific products, or will identify a class of products
* which have agreed to behave the same. You should put the more specific
* matches towards the beginning of your table, so that driver_info can
* record quirks of specific products.
*/
struct usb_device_id {
/* which fields to match against? */
__u16 match_flags;
/* Used for product specific matches; range is inclusive */
__u16 idVendor;
__u16 idProduct;
__u16 bcdDevice_lo;
__u16 bcdDevice_hi;
/* Used for device class matches */
__u8 bDeviceClass;
__u8 bDeviceSubClass;
__u8 bDeviceProtocol;
/* Used for interface class matches */
__u8 bInterfaceClass;
__u8 bInterfaceSubClass;
__u8 bInterfaceProtocol;
/* not matched against */
kernel_ulong_t driver_info;
};
/* Some useful macros to use to create struct usb_device_id */
#define USB_DEVICE_ID_MATCH_VENDOR 0x0001
#define USB_DEVICE_ID_MATCH_PRODUCT 0x0002
#define USB_DEVICE_ID_MATCH_DEV_LO 0x0004
#define USB_DEVICE_ID_MATCH_DEV_HI 0x0008
#define USB_DEVICE_ID_MATCH_DEV_CLASS 0x0010
#define USB_DEVICE_ID_MATCH_DEV_SUBCLASS 0x0020
#define USB_DEVICE_ID_MATCH_DEV_PROTOCOL 0x0040
#define USB_DEVICE_ID_MATCH_INT_CLASS 0x0080
#define USB_DEVICE_ID_MATCH_INT_SUBCLASS 0x0100
#define USB_DEVICE_ID_MATCH_INT_PROTOCOL 0x0200
/* s390 CCW devices */
struct ccw_device_id {
__u16 match_flags; /* which fields to match against */
__u16 cu_type; /* control unit type */
__u16 dev_type; /* device type */
__u8 cu_model; /* control unit model */
__u8 dev_model; /* device model */
kernel_ulong_t driver_info;
};
#define CCW_DEVICE_ID_MATCH_CU_TYPE 0x01
#define CCW_DEVICE_ID_MATCH_CU_MODEL 0x02
#define CCW_DEVICE_ID_MATCH_DEVICE_TYPE 0x04
#define CCW_DEVICE_ID_MATCH_DEVICE_MODEL 0x08
/* s390 AP bus devices */
struct ap_device_id {
__u16 match_flags; /* which fields to match against */
__u8 dev_type; /* device type */
__u8 pad1;
__u32 pad2;
kernel_ulong_t driver_info;
};
#define AP_DEVICE_ID_MATCH_DEVICE_TYPE 0x01
#define PNP_ID_LEN 8
#define PNP_MAX_DEVICES 8
struct pnp_device_id {
__u8 id[PNP_ID_LEN];
kernel_ulong_t driver_data;
};
struct pnp_card_device_id {
__u8 id[PNP_ID_LEN];
kernel_ulong_t driver_data;
struct {
__u8 id[PNP_ID_LEN];
} devs[PNP_MAX_DEVICES];
};
#define SERIO_ANY 0xff
struct serio_device_id {
__u8 type;
__u8 extra;
__u8 id;
__u8 proto;
};
/*
* Struct used for matching a device
*/
struct of_device_id
{
char name[32];
char type[32];
char compatible[128];
#ifdef __KERNEL__
void *data;
#else
kernel_ulong_t data;
#endif
};
/* VIO */
struct vio_device_id {
char type[32];
char compat[32];
};
/* PCMCIA */
struct pcmcia_device_id {
__u16 match_flags;
__u16 manf_id;
__u16 card_id;
__u8 func_id;
/* for real multi-function devices */
__u8 function;
/* for pseudo multi-function devices */
__u8 device_no;
__u32 prod_id_hash[4]
__attribute__((aligned(sizeof(__u32))));
/* not matched against in kernelspace*/
#ifdef __KERNEL__
const char * prod_id[4];
#else
kernel_ulong_t prod_id[4]
__attribute__((aligned(sizeof(kernel_ulong_t))));
#endif
/* not matched against */
kernel_ulong_t driver_info;
#ifdef __KERNEL__
char * cisfile;
#else
kernel_ulong_t cisfile;
#endif
};
#define PCMCIA_DEV_ID_MATCH_MANF_ID 0x0001
#define PCMCIA_DEV_ID_MATCH_CARD_ID 0x0002
#define PCMCIA_DEV_ID_MATCH_FUNC_ID 0x0004
#define PCMCIA_DEV_ID_MATCH_FUNCTION 0x0008
#define PCMCIA_DEV_ID_MATCH_PROD_ID1 0x0010
#define PCMCIA_DEV_ID_MATCH_PROD_ID2 0x0020
#define PCMCIA_DEV_ID_MATCH_PROD_ID3 0x0040
#define PCMCIA_DEV_ID_MATCH_PROD_ID4 0x0080
#define PCMCIA_DEV_ID_MATCH_DEVICE_NO 0x0100
#define PCMCIA_DEV_ID_MATCH_FAKE_CIS 0x0200
#define PCMCIA_DEV_ID_MATCH_ANONYMOUS 0x0400
/* I2C */
struct i2c_device_id {
__u16 id;
};
/* Input */
#define INPUT_DEVICE_ID_EV_MAX 0x1f
#define INPUT_DEVICE_ID_KEY_MAX 0x1ff
#define INPUT_DEVICE_ID_REL_MAX 0x0f
#define INPUT_DEVICE_ID_ABS_MAX 0x3f
#define INPUT_DEVICE_ID_MSC_MAX 0x07
#define INPUT_DEVICE_ID_LED_MAX 0x0f
#define INPUT_DEVICE_ID_SND_MAX 0x07
#define INPUT_DEVICE_ID_FF_MAX 0x7f
#define INPUT_DEVICE_ID_SW_MAX 0x0f
#define INPUT_DEVICE_ID_MATCH_BUS 1
#define INPUT_DEVICE_ID_MATCH_VENDOR 2
#define INPUT_DEVICE_ID_MATCH_PRODUCT 4
#define INPUT_DEVICE_ID_MATCH_VERSION 8
#define INPUT_DEVICE_ID_MATCH_EVBIT 0x0010
#define INPUT_DEVICE_ID_MATCH_KEYBIT 0x0020
#define INPUT_DEVICE_ID_MATCH_RELBIT 0x0040
#define INPUT_DEVICE_ID_MATCH_ABSBIT 0x0080
#define INPUT_DEVICE_ID_MATCH_MSCIT 0x0100
#define INPUT_DEVICE_ID_MATCH_LEDBIT 0x0200
#define INPUT_DEVICE_ID_MATCH_SNDBIT 0x0400
#define INPUT_DEVICE_ID_MATCH_FFBIT 0x0800
#define INPUT_DEVICE_ID_MATCH_SWBIT 0x1000
struct input_device_id {
kernel_ulong_t flags;
__u16 bustype;
__u16 vendor;
__u16 product;
__u16 version;
kernel_ulong_t evbit[INPUT_DEVICE_ID_EV_MAX / BITS_PER_LONG + 1];
kernel_ulong_t keybit[INPUT_DEVICE_ID_KEY_MAX / BITS_PER_LONG + 1];
kernel_ulong_t relbit[INPUT_DEVICE_ID_REL_MAX / BITS_PER_LONG + 1];
kernel_ulong_t absbit[INPUT_DEVICE_ID_ABS_MAX / BITS_PER_LONG + 1];
kernel_ulong_t mscbit[INPUT_DEVICE_ID_MSC_MAX / BITS_PER_LONG + 1];
kernel_ulong_t ledbit[INPUT_DEVICE_ID_LED_MAX / BITS_PER_LONG + 1];
kernel_ulong_t sndbit[INPUT_DEVICE_ID_SND_MAX / BITS_PER_LONG + 1];
kernel_ulong_t ffbit[INPUT_DEVICE_ID_FF_MAX / BITS_PER_LONG + 1];
kernel_ulong_t swbit[INPUT_DEVICE_ID_SW_MAX / BITS_PER_LONG + 1];
kernel_ulong_t driver_info;
};
#endif /* LINUX_MOD_DEVICETABLE_H */