7551769a22
This commit implements support for the "module 0" type of clocks, as used by MMC, IR, NAND, SATA and other components. Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Mike Turquette <mturquette@linaro.org>
77 lines
3.2 KiB
Text
77 lines
3.2 KiB
Text
Device Tree Clock bindings for arch-sunxi
|
|
|
|
This binding uses the common clock binding[1].
|
|
|
|
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
|
|
|
|
Required properties:
|
|
- compatible : shall be one of the following:
|
|
"allwinner,sun4i-osc-clk" - for a gatable oscillator
|
|
"allwinner,sun4i-pll1-clk" - for the main PLL clock and PLL4
|
|
"allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
|
|
"allwinner,sun4i-pll5-clk" - for the PLL5 clock
|
|
"allwinner,sun4i-pll6-clk" - for the PLL6 clock
|
|
"allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
|
|
"allwinner,sun4i-axi-clk" - for the AXI clock
|
|
"allwinner,sun4i-axi-gates-clk" - for the AXI gates
|
|
"allwinner,sun4i-ahb-clk" - for the AHB clock
|
|
"allwinner,sun4i-ahb-gates-clk" - for the AHB gates on A10
|
|
"allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13
|
|
"allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
|
|
"allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20
|
|
"allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31
|
|
"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
|
|
"allwinner,sun4i-apb0-clk" - for the APB0 clock
|
|
"allwinner,sun4i-apb0-gates-clk" - for the APB0 gates on A10
|
|
"allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13
|
|
"allwinner,sun5i-a10s-apb0-gates-clk" - for the APB0 gates on A10s
|
|
"allwinner,sun7i-a20-apb0-gates-clk" - for the APB0 gates on A20
|
|
"allwinner,sun4i-apb1-clk" - for the APB1 clock
|
|
"allwinner,sun4i-apb1-mux-clk" - for the APB1 clock muxing
|
|
"allwinner,sun4i-apb1-gates-clk" - for the APB1 gates on A10
|
|
"allwinner,sun5i-a13-apb1-gates-clk" - for the APB1 gates on A13
|
|
"allwinner,sun5i-a10s-apb1-gates-clk" - for the APB1 gates on A10s
|
|
"allwinner,sun6i-a31-apb1-gates-clk" - for the APB1 gates on A31
|
|
"allwinner,sun7i-a20-apb1-gates-clk" - for the APB1 gates on A20
|
|
"allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31
|
|
"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
|
|
"allwinner,sun4i-mod0-clk" - for the module 0 family of clocks
|
|
|
|
Required properties for all clocks:
|
|
- reg : shall be the control register address for the clock.
|
|
- clocks : shall be the input parent clock(s) phandle for the clock. For
|
|
multiplexed clocks, the list order must match the hardware
|
|
programming order.
|
|
- #clock-cells : from common clock binding; shall be set to 0 except for
|
|
"allwinner,*-gates-clk" where it shall be set to 1
|
|
|
|
Additionally, "allwinner,*-gates-clk" clocks require:
|
|
- clock-output-names : the corresponding gate names that the clock controls
|
|
|
|
Clock consumers should specify the desired clocks they use with a
|
|
"clocks" phandle cell. Consumers that are using a gated clock should
|
|
provide an additional ID in their clock property. This ID is the
|
|
offset of the bit controlling this particular gate in the register.
|
|
|
|
For example:
|
|
|
|
osc24M: osc24M@01c20050 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-osc-clk";
|
|
reg = <0x01c20050 0x4>;
|
|
clocks = <&osc24M_fixed>;
|
|
};
|
|
|
|
pll1: pll1@01c20000 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-pll1-clk";
|
|
reg = <0x01c20000 0x4>;
|
|
clocks = <&osc24M>;
|
|
};
|
|
|
|
cpu: cpu@01c20054 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-cpu-clk";
|
|
reg = <0x01c20054 0x4>;
|
|
clocks = <&osc32k>, <&osc24M>, <&pll1>;
|
|
};
|