905a09d57a
(20072fd0c9 lost most of its changes
somehow, came from a mbox archive applied with git-am. No idea
what happened. This puts back the missing bits. --rmk)
The initial patch from Lothar, and Lennert make it into a cleaner
one, modified and tested on PXA320 by Eric Miao.
This patch moves the L2 cache operations out of proc-xsc3.S into
dedicated outer cache support code.
CACHE_XSC3L2 can be deselected so no L2 cache specific code will be
linked in, and that L2 enable bit will not be set, this applies to
the following cases:
a. _only_ PXA300/PXA310 support included and no L2 cache wanted
b. PXA320 support included, but want L2 be disabled
So the enabling of L2 depends on two things:
- CACHE_XSC3L2 is selected
- and L2 cache is present
Where the latter is only a safeguard (previous testing shows it works
OK even when this bit is turned on).
IXP series of processors with XScale3 cannot disable L2 cache for the
moment since they depend on the L2 cache for its coherent memory, so
IXP may always select CACHE_XSC3L2.
Other L2 relevant bits are always turned on (i.e. the original code
enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side
effects. Specifically, these bits are:
- OC bits in TTBASE register (table walk outer cache attributes)
- LLR Outer Cache Attributes (OC) in Auxiliary Control Register
Signed-off-by: Lothar WaÃ<9f>mann <LW@KARO-electronics.de>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
752 lines
19 KiB
Text
752 lines
19 KiB
Text
comment "Processor Type"
|
|
|
|
config CPU_32
|
|
bool
|
|
default y
|
|
|
|
# Select CPU types depending on the architecture selected. This selects
|
|
# which CPUs we support in the kernel image, and the compiler instruction
|
|
# optimiser behaviour.
|
|
|
|
# ARM610
|
|
config CPU_ARM610
|
|
bool "Support ARM610 processor"
|
|
depends on ARCH_RPC
|
|
select CPU_32v3
|
|
select CPU_CACHE_V3
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_COPY_V3 if MMU
|
|
select CPU_TLB_V3 if MMU
|
|
select CPU_PABRT_NOIFAR
|
|
help
|
|
The ARM610 is the successor to the ARM3 processor
|
|
and was produced by VLSI Technology Inc.
|
|
|
|
Say Y if you want support for the ARM610 processor.
|
|
Otherwise, say N.
|
|
|
|
# ARM7TDMI
|
|
config CPU_ARM7TDMI
|
|
bool "Support ARM7TDMI processor"
|
|
depends on !MMU
|
|
select CPU_32v4T
|
|
select CPU_ABRT_LV4T
|
|
select CPU_PABRT_NOIFAR
|
|
select CPU_CACHE_V4
|
|
help
|
|
A 32-bit RISC microprocessor based on the ARM7 processor core
|
|
which has no memory control unit and cache.
|
|
|
|
Say Y if you want support for the ARM7TDMI processor.
|
|
Otherwise, say N.
|
|
|
|
# ARM710
|
|
config CPU_ARM710
|
|
bool "Support ARM710 processor" if !ARCH_CLPS7500 && ARCH_RPC
|
|
default y if ARCH_CLPS7500
|
|
select CPU_32v3
|
|
select CPU_CACHE_V3
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_COPY_V3 if MMU
|
|
select CPU_TLB_V3 if MMU
|
|
select CPU_PABRT_NOIFAR
|
|
help
|
|
A 32-bit RISC microprocessor based on the ARM7 processor core
|
|
designed by Advanced RISC Machines Ltd. The ARM710 is the
|
|
successor to the ARM610 processor. It was released in
|
|
July 1994 by VLSI Technology Inc.
|
|
|
|
Say Y if you want support for the ARM710 processor.
|
|
Otherwise, say N.
|
|
|
|
# ARM720T
|
|
config CPU_ARM720T
|
|
bool "Support ARM720T processor" if !ARCH_CLPS711X && !ARCH_L7200 && !ARCH_CDB89712 && ARCH_INTEGRATOR
|
|
default y if ARCH_CLPS711X || ARCH_L7200 || ARCH_CDB89712 || ARCH_H720X
|
|
select CPU_32v4T
|
|
select CPU_ABRT_LV4T
|
|
select CPU_PABRT_NOIFAR
|
|
select CPU_CACHE_V4
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_COPY_V4WT if MMU
|
|
select CPU_TLB_V4WT if MMU
|
|
help
|
|
A 32-bit RISC processor with 8kByte Cache, Write Buffer and
|
|
MMU built around an ARM7TDMI core.
|
|
|
|
Say Y if you want support for the ARM720T processor.
|
|
Otherwise, say N.
|
|
|
|
# ARM740T
|
|
config CPU_ARM740T
|
|
bool "Support ARM740T processor" if ARCH_INTEGRATOR
|
|
depends on !MMU
|
|
select CPU_32v4T
|
|
select CPU_ABRT_LV4T
|
|
select CPU_PABRT_NOIFAR
|
|
select CPU_CACHE_V3 # although the core is v4t
|
|
select CPU_CP15_MPU
|
|
help
|
|
A 32-bit RISC processor with 8KB cache or 4KB variants,
|
|
write buffer and MPU(Protection Unit) built around
|
|
an ARM7TDMI core.
|
|
|
|
Say Y if you want support for the ARM740T processor.
|
|
Otherwise, say N.
|
|
|
|
# ARM9TDMI
|
|
config CPU_ARM9TDMI
|
|
bool "Support ARM9TDMI processor"
|
|
depends on !MMU
|
|
select CPU_32v4T
|
|
select CPU_ABRT_NOMMU
|
|
select CPU_PABRT_NOIFAR
|
|
select CPU_CACHE_V4
|
|
help
|
|
A 32-bit RISC microprocessor based on the ARM9 processor core
|
|
which has no memory control unit and cache.
|
|
|
|
Say Y if you want support for the ARM9TDMI processor.
|
|
Otherwise, say N.
|
|
|
|
# ARM920T
|
|
config CPU_ARM920T
|
|
bool "Support ARM920T processor"
|
|
depends on ARCH_EP93XX || ARCH_INTEGRATOR || CPU_S3C2410 || CPU_S3C2440 || CPU_S3C2442 || ARCH_IMX || ARCH_AAEC2000 || ARCH_AT91RM9200
|
|
default y if CPU_S3C2410 || CPU_S3C2440 || CPU_S3C2442 || ARCH_AT91RM9200
|
|
select CPU_32v4T
|
|
select CPU_ABRT_EV4T
|
|
select CPU_PABRT_NOIFAR
|
|
select CPU_CACHE_V4WT
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_COPY_V4WB if MMU
|
|
select CPU_TLB_V4WBI if MMU
|
|
help
|
|
The ARM920T is licensed to be produced by numerous vendors,
|
|
and is used in the Maverick EP9312 and the Samsung S3C2410.
|
|
|
|
More information on the Maverick EP9312 at
|
|
<http://linuxdevices.com/products/PD2382866068.html>.
|
|
|
|
Say Y if you want support for the ARM920T processor.
|
|
Otherwise, say N.
|
|
|
|
# ARM922T
|
|
config CPU_ARM922T
|
|
bool "Support ARM922T processor" if ARCH_INTEGRATOR
|
|
depends on ARCH_LH7A40X || ARCH_INTEGRATOR || ARCH_KS8695
|
|
default y if ARCH_LH7A40X || ARCH_KS8695
|
|
select CPU_32v4T
|
|
select CPU_ABRT_EV4T
|
|
select CPU_PABRT_NOIFAR
|
|
select CPU_CACHE_V4WT
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_COPY_V4WB if MMU
|
|
select CPU_TLB_V4WBI if MMU
|
|
help
|
|
The ARM922T is a version of the ARM920T, but with smaller
|
|
instruction and data caches. It is used in Altera's
|
|
Excalibur XA device family and Micrel's KS8695 Centaur.
|
|
|
|
Say Y if you want support for the ARM922T processor.
|
|
Otherwise, say N.
|
|
|
|
# ARM925T
|
|
config CPU_ARM925T
|
|
bool "Support ARM925T processor" if ARCH_OMAP1
|
|
depends on ARCH_OMAP15XX
|
|
default y if ARCH_OMAP15XX
|
|
select CPU_32v4T
|
|
select CPU_ABRT_EV4T
|
|
select CPU_PABRT_NOIFAR
|
|
select CPU_CACHE_V4WT
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_COPY_V4WB if MMU
|
|
select CPU_TLB_V4WBI if MMU
|
|
help
|
|
The ARM925T is a mix between the ARM920T and ARM926T, but with
|
|
different instruction and data caches. It is used in TI's OMAP
|
|
device family.
|
|
|
|
Say Y if you want support for the ARM925T processor.
|
|
Otherwise, say N.
|
|
|
|
# ARM926T
|
|
config CPU_ARM926T
|
|
bool "Support ARM926T processor"
|
|
depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || \
|
|
MACH_VERSATILE_AB || ARCH_OMAP730 || \
|
|
ARCH_OMAP16XX || MACH_REALVIEW_EB || \
|
|
ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || \
|
|
ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || \
|
|
ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || \
|
|
ARCH_AT91SAM9G20 || ARCH_AT91CAP9 || \
|
|
ARCH_NS9XXX || ARCH_DAVINCI || ARCH_MX2
|
|
default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || \
|
|
ARCH_OMAP730 || ARCH_OMAP16XX || \
|
|
ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || \
|
|
ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || \
|
|
ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || \
|
|
ARCH_AT91SAM9G20 || ARCH_AT91CAP9 || \
|
|
ARCH_NS9XXX || ARCH_DAVINCI || ARCH_MX2
|
|
select CPU_32v5
|
|
select CPU_ABRT_EV5TJ
|
|
select CPU_PABRT_NOIFAR
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_COPY_V4WB if MMU
|
|
select CPU_TLB_V4WBI if MMU
|
|
help
|
|
This is a variant of the ARM920. It has slightly different
|
|
instruction sequences for cache and TLB operations. Curiously,
|
|
there is no documentation on it at the ARM corporate website.
|
|
|
|
Say Y if you want support for the ARM926T processor.
|
|
Otherwise, say N.
|
|
|
|
# ARM940T
|
|
config CPU_ARM940T
|
|
bool "Support ARM940T processor" if ARCH_INTEGRATOR
|
|
depends on !MMU
|
|
select CPU_32v4T
|
|
select CPU_ABRT_NOMMU
|
|
select CPU_PABRT_NOIFAR
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MPU
|
|
help
|
|
ARM940T is a member of the ARM9TDMI family of general-
|
|
purpose microprocessors with MPU and separate 4KB
|
|
instruction and 4KB data cases, each with a 4-word line
|
|
length.
|
|
|
|
Say Y if you want support for the ARM940T processor.
|
|
Otherwise, say N.
|
|
|
|
# ARM946E-S
|
|
config CPU_ARM946E
|
|
bool "Support ARM946E-S processor" if ARCH_INTEGRATOR
|
|
depends on !MMU
|
|
select CPU_32v5
|
|
select CPU_ABRT_NOMMU
|
|
select CPU_PABRT_NOIFAR
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MPU
|
|
help
|
|
ARM946E-S is a member of the ARM9E-S family of high-
|
|
performance, 32-bit system-on-chip processor solutions.
|
|
The TCM and ARMv5TE 32-bit instruction set is supported.
|
|
|
|
Say Y if you want support for the ARM946E-S processor.
|
|
Otherwise, say N.
|
|
|
|
# ARM1020 - needs validating
|
|
config CPU_ARM1020
|
|
bool "Support ARM1020T (rev 0) processor"
|
|
depends on ARCH_INTEGRATOR
|
|
select CPU_32v5
|
|
select CPU_ABRT_EV4T
|
|
select CPU_PABRT_NOIFAR
|
|
select CPU_CACHE_V4WT
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_COPY_V4WB if MMU
|
|
select CPU_TLB_V4WBI if MMU
|
|
help
|
|
The ARM1020 is the 32K cached version of the ARM10 processor,
|
|
with an addition of a floating-point unit.
|
|
|
|
Say Y if you want support for the ARM1020 processor.
|
|
Otherwise, say N.
|
|
|
|
# ARM1020E - needs validating
|
|
config CPU_ARM1020E
|
|
bool "Support ARM1020E processor"
|
|
depends on ARCH_INTEGRATOR
|
|
select CPU_32v5
|
|
select CPU_ABRT_EV4T
|
|
select CPU_PABRT_NOIFAR
|
|
select CPU_CACHE_V4WT
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_COPY_V4WB if MMU
|
|
select CPU_TLB_V4WBI if MMU
|
|
depends on n
|
|
|
|
# ARM1022E
|
|
config CPU_ARM1022
|
|
bool "Support ARM1022E processor"
|
|
depends on ARCH_INTEGRATOR
|
|
select CPU_32v5
|
|
select CPU_ABRT_EV4T
|
|
select CPU_PABRT_NOIFAR
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_COPY_V4WB if MMU # can probably do better
|
|
select CPU_TLB_V4WBI if MMU
|
|
help
|
|
The ARM1022E is an implementation of the ARMv5TE architecture
|
|
based upon the ARM10 integer core with a 16KiB L1 Harvard cache,
|
|
embedded trace macrocell, and a floating-point unit.
|
|
|
|
Say Y if you want support for the ARM1022E processor.
|
|
Otherwise, say N.
|
|
|
|
# ARM1026EJ-S
|
|
config CPU_ARM1026
|
|
bool "Support ARM1026EJ-S processor"
|
|
depends on ARCH_INTEGRATOR
|
|
select CPU_32v5
|
|
select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
|
|
select CPU_PABRT_NOIFAR
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_COPY_V4WB if MMU # can probably do better
|
|
select CPU_TLB_V4WBI if MMU
|
|
help
|
|
The ARM1026EJ-S is an implementation of the ARMv5TEJ architecture
|
|
based upon the ARM10 integer core.
|
|
|
|
Say Y if you want support for the ARM1026EJ-S processor.
|
|
Otherwise, say N.
|
|
|
|
# SA110
|
|
config CPU_SA110
|
|
bool "Support StrongARM(R) SA-110 processor" if !ARCH_EBSA110 && !FOOTBRIDGE && !ARCH_TBOX && !ARCH_SHARK && !ARCH_NEXUSPCI && ARCH_RPC
|
|
default y if ARCH_EBSA110 || FOOTBRIDGE || ARCH_TBOX || ARCH_SHARK || ARCH_NEXUSPCI
|
|
select CPU_32v3 if ARCH_RPC
|
|
select CPU_32v4 if !ARCH_RPC
|
|
select CPU_ABRT_EV4
|
|
select CPU_PABRT_NOIFAR
|
|
select CPU_CACHE_V4WB
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_COPY_V4WB if MMU
|
|
select CPU_TLB_V4WB if MMU
|
|
help
|
|
The Intel StrongARM(R) SA-110 is a 32-bit microprocessor and
|
|
is available at five speeds ranging from 100 MHz to 233 MHz.
|
|
More information is available at
|
|
<http://developer.intel.com/design/strong/sa110.htm>.
|
|
|
|
Say Y if you want support for the SA-110 processor.
|
|
Otherwise, say N.
|
|
|
|
# SA1100
|
|
config CPU_SA1100
|
|
bool
|
|
depends on ARCH_SA1100
|
|
default y
|
|
select CPU_32v4
|
|
select CPU_ABRT_EV4
|
|
select CPU_PABRT_NOIFAR
|
|
select CPU_CACHE_V4WB
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_TLB_V4WB if MMU
|
|
|
|
# XScale
|
|
config CPU_XSCALE
|
|
bool
|
|
depends on ARCH_IOP32X || ARCH_IOP33X || PXA25x || PXA27x || ARCH_IXP4XX || ARCH_IXP2000
|
|
default y
|
|
select CPU_32v5
|
|
select CPU_ABRT_EV5T
|
|
select CPU_PABRT_NOIFAR
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_TLB_V4WBI if MMU
|
|
|
|
# XScale Core Version 3
|
|
config CPU_XSC3
|
|
bool
|
|
depends on ARCH_IXP23XX || ARCH_IOP13XX || PXA3xx
|
|
default y
|
|
select CPU_32v5
|
|
select CPU_ABRT_EV5T
|
|
select CPU_PABRT_NOIFAR
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_TLB_V4WBI if MMU
|
|
select IO_36
|
|
|
|
# Feroceon
|
|
config CPU_FEROCEON
|
|
bool
|
|
depends on ARCH_ORION5X || ARCH_LOKI || ARCH_KIRKWOOD || ARCH_MV78XX0
|
|
default y
|
|
select CPU_32v5
|
|
select CPU_ABRT_EV5T
|
|
select CPU_PABRT_NOIFAR
|
|
select CPU_CACHE_VIVT
|
|
select CPU_CP15_MMU
|
|
select CPU_COPY_FEROCEON if MMU
|
|
select CPU_TLB_FEROCEON if MMU
|
|
|
|
config CPU_FEROCEON_OLD_ID
|
|
bool "Accept early Feroceon cores with an ARM926 ID"
|
|
depends on CPU_FEROCEON && !CPU_ARM926T
|
|
default y
|
|
help
|
|
This enables the usage of some old Feroceon cores
|
|
for which the CPU ID is equal to the ARM926 ID.
|
|
Relevant for Feroceon-1850 and early Feroceon-2850.
|
|
|
|
# ARMv6
|
|
config CPU_V6
|
|
bool "Support ARM V6 processor"
|
|
depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM7X00A || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176
|
|
default y if ARCH_MX3
|
|
default y if ARCH_MSM7X00A
|
|
select CPU_32v6
|
|
select CPU_ABRT_EV6
|
|
select CPU_PABRT_NOIFAR
|
|
select CPU_CACHE_V6
|
|
select CPU_CACHE_VIPT
|
|
select CPU_CP15_MMU
|
|
select CPU_HAS_ASID if MMU
|
|
select CPU_COPY_V6 if MMU
|
|
select CPU_TLB_V6 if MMU
|
|
|
|
# ARMv6k
|
|
config CPU_32v6K
|
|
bool "Support ARM V6K processor extensions" if !SMP
|
|
depends on CPU_V6
|
|
default y if SMP && !ARCH_MX3
|
|
help
|
|
Say Y here if your ARMv6 processor supports the 'K' extension.
|
|
This enables the kernel to use some instructions not present
|
|
on previous processors, and as such a kernel build with this
|
|
enabled will not boot on processors with do not support these
|
|
instructions.
|
|
|
|
# ARMv7
|
|
config CPU_V7
|
|
bool "Support ARM V7 processor"
|
|
depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB
|
|
select CPU_32v6K
|
|
select CPU_32v7
|
|
select CPU_ABRT_EV7
|
|
select CPU_PABRT_IFAR
|
|
select CPU_CACHE_V7
|
|
select CPU_CACHE_VIPT
|
|
select CPU_CP15_MMU
|
|
select CPU_HAS_ASID if MMU
|
|
select CPU_COPY_V6 if MMU
|
|
select CPU_TLB_V7 if MMU
|
|
|
|
# Figure out what processor architecture version we should be using.
|
|
# This defines the compiler instruction set which depends on the machine type.
|
|
config CPU_32v3
|
|
bool
|
|
select TLS_REG_EMUL if SMP || !MMU
|
|
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
|
|
|
|
config CPU_32v4
|
|
bool
|
|
select TLS_REG_EMUL if SMP || !MMU
|
|
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
|
|
|
|
config CPU_32v4T
|
|
bool
|
|
select TLS_REG_EMUL if SMP || !MMU
|
|
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
|
|
|
|
config CPU_32v5
|
|
bool
|
|
select TLS_REG_EMUL if SMP || !MMU
|
|
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
|
|
|
|
config CPU_32v6
|
|
bool
|
|
select TLS_REG_EMUL if !CPU_32v6K && !MMU
|
|
|
|
config CPU_32v7
|
|
bool
|
|
|
|
# The abort model
|
|
config CPU_ABRT_NOMMU
|
|
bool
|
|
|
|
config CPU_ABRT_EV4
|
|
bool
|
|
|
|
config CPU_ABRT_EV4T
|
|
bool
|
|
|
|
config CPU_ABRT_LV4T
|
|
bool
|
|
|
|
config CPU_ABRT_EV5T
|
|
bool
|
|
|
|
config CPU_ABRT_EV5TJ
|
|
bool
|
|
|
|
config CPU_ABRT_EV6
|
|
bool
|
|
|
|
config CPU_ABRT_EV7
|
|
bool
|
|
|
|
config CPU_PABRT_IFAR
|
|
bool
|
|
|
|
config CPU_PABRT_NOIFAR
|
|
bool
|
|
|
|
# The cache model
|
|
config CPU_CACHE_V3
|
|
bool
|
|
|
|
config CPU_CACHE_V4
|
|
bool
|
|
|
|
config CPU_CACHE_V4WT
|
|
bool
|
|
|
|
config CPU_CACHE_V4WB
|
|
bool
|
|
|
|
config CPU_CACHE_V6
|
|
bool
|
|
|
|
config CPU_CACHE_V7
|
|
bool
|
|
|
|
config CPU_CACHE_VIVT
|
|
bool
|
|
|
|
config CPU_CACHE_VIPT
|
|
bool
|
|
|
|
if MMU
|
|
# The copy-page model
|
|
config CPU_COPY_V3
|
|
bool
|
|
|
|
config CPU_COPY_V4WT
|
|
bool
|
|
|
|
config CPU_COPY_V4WB
|
|
bool
|
|
|
|
config CPU_COPY_FEROCEON
|
|
bool
|
|
|
|
config CPU_COPY_V6
|
|
bool
|
|
|
|
# This selects the TLB model
|
|
config CPU_TLB_V3
|
|
bool
|
|
help
|
|
ARM Architecture Version 3 TLB.
|
|
|
|
config CPU_TLB_V4WT
|
|
bool
|
|
help
|
|
ARM Architecture Version 4 TLB with writethrough cache.
|
|
|
|
config CPU_TLB_V4WB
|
|
bool
|
|
help
|
|
ARM Architecture Version 4 TLB with writeback cache.
|
|
|
|
config CPU_TLB_V4WBI
|
|
bool
|
|
help
|
|
ARM Architecture Version 4 TLB with writeback cache and invalidate
|
|
instruction cache entry.
|
|
|
|
config CPU_TLB_FEROCEON
|
|
bool
|
|
help
|
|
Feroceon TLB (v4wbi with non-outer-cachable page table walks).
|
|
|
|
config CPU_TLB_V6
|
|
bool
|
|
|
|
config CPU_TLB_V7
|
|
bool
|
|
|
|
endif
|
|
|
|
config CPU_HAS_ASID
|
|
bool
|
|
help
|
|
This indicates whether the CPU has the ASID register; used to
|
|
tag TLB and possibly cache entries.
|
|
|
|
config CPU_CP15
|
|
bool
|
|
help
|
|
Processor has the CP15 register.
|
|
|
|
config CPU_CP15_MMU
|
|
bool
|
|
select CPU_CP15
|
|
help
|
|
Processor has the CP15 register, which has MMU related registers.
|
|
|
|
config CPU_CP15_MPU
|
|
bool
|
|
select CPU_CP15
|
|
help
|
|
Processor has the CP15 register, which has MPU related registers.
|
|
|
|
#
|
|
# CPU supports 36-bit I/O
|
|
#
|
|
config IO_36
|
|
bool
|
|
|
|
comment "Processor Features"
|
|
|
|
config ARM_THUMB
|
|
bool "Support Thumb user binaries"
|
|
depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6 || CPU_V7 || CPU_FEROCEON
|
|
default y
|
|
help
|
|
Say Y if you want to include kernel support for running user space
|
|
Thumb binaries.
|
|
|
|
The Thumb instruction set is a compressed form of the standard ARM
|
|
instruction set resulting in smaller binaries at the expense of
|
|
slightly less efficient code.
|
|
|
|
If you don't know what this all is, saying Y is a safe choice.
|
|
|
|
config ARM_THUMBEE
|
|
bool "Enable ThumbEE CPU extension"
|
|
depends on CPU_V7
|
|
help
|
|
Say Y here if you have a CPU with the ThumbEE extension and code to
|
|
make use of it. Say N for code that can run on CPUs without ThumbEE.
|
|
|
|
config CPU_BIG_ENDIAN
|
|
bool "Build big-endian kernel"
|
|
depends on ARCH_SUPPORTS_BIG_ENDIAN
|
|
help
|
|
Say Y if you plan on running a kernel in big-endian mode.
|
|
Note that your board must be properly built and your board
|
|
port must properly enable any big-endian related features
|
|
of your chipset/board/processor.
|
|
|
|
config CPU_HIGH_VECTOR
|
|
depends on !MMU && CPU_CP15 && !CPU_ARM740T
|
|
bool "Select the High exception vector"
|
|
default n
|
|
help
|
|
Say Y here to select high exception vector(0xFFFF0000~).
|
|
The exception vector can be vary depending on the platform
|
|
design in nommu mode. If your platform needs to select
|
|
high exception vector, say Y.
|
|
Otherwise or if you are unsure, say N, and the low exception
|
|
vector (0x00000000~) will be used.
|
|
|
|
config CPU_ICACHE_DISABLE
|
|
bool "Disable I-Cache (I-bit)"
|
|
depends on CPU_CP15 && !(CPU_ARM610 || CPU_ARM710 || CPU_ARM720T || CPU_ARM740T || CPU_XSCALE || CPU_XSC3)
|
|
help
|
|
Say Y here to disable the processor instruction cache. Unless
|
|
you have a reason not to or are unsure, say N.
|
|
|
|
config CPU_DCACHE_DISABLE
|
|
bool "Disable D-Cache (C-bit)"
|
|
depends on CPU_CP15
|
|
help
|
|
Say Y here to disable the processor data cache. Unless
|
|
you have a reason not to or are unsure, say N.
|
|
|
|
config CPU_DCACHE_SIZE
|
|
hex
|
|
depends on CPU_ARM740T || CPU_ARM946E
|
|
default 0x00001000 if CPU_ARM740T
|
|
default 0x00002000 # default size for ARM946E-S
|
|
help
|
|
Some cores are synthesizable to have various sized cache. For
|
|
ARM946E-S case, it can vary from 0KB to 1MB.
|
|
To support such cache operations, it is efficient to know the size
|
|
before compile time.
|
|
If your SoC is configured to have a different size, define the value
|
|
here with proper conditions.
|
|
|
|
config CPU_DCACHE_WRITETHROUGH
|
|
bool "Force write through D-cache"
|
|
depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020) && !CPU_DCACHE_DISABLE
|
|
default y if CPU_ARM925T
|
|
help
|
|
Say Y here to use the data cache in writethrough mode. Unless you
|
|
specifically require this or are unsure, say N.
|
|
|
|
config CPU_CACHE_ROUND_ROBIN
|
|
bool "Round robin I and D cache replacement algorithm"
|
|
depends on (CPU_ARM926T || CPU_ARM946E || CPU_ARM1020) && (!CPU_ICACHE_DISABLE || !CPU_DCACHE_DISABLE)
|
|
help
|
|
Say Y here to use the predictable round-robin cache replacement
|
|
policy. Unless you specifically require this or are unsure, say N.
|
|
|
|
config CPU_BPREDICT_DISABLE
|
|
bool "Disable branch prediction"
|
|
depends on CPU_ARM1020 || CPU_V6 || CPU_XSC3 || CPU_V7
|
|
help
|
|
Say Y here to disable branch prediction. If unsure, say N.
|
|
|
|
config TLS_REG_EMUL
|
|
bool
|
|
help
|
|
An SMP system using a pre-ARMv6 processor (there are apparently
|
|
a few prototypes like that in existence) and therefore access to
|
|
that required register must be emulated.
|
|
|
|
config HAS_TLS_REG
|
|
bool
|
|
depends on !TLS_REG_EMUL
|
|
default y if SMP || CPU_32v7
|
|
help
|
|
This selects support for the CP15 thread register.
|
|
It is defined to be available on some ARMv6 processors (including
|
|
all SMP capable ARMv6's) or later processors. User space may
|
|
assume directly accessing that register and always obtain the
|
|
expected value only on ARMv7 and above.
|
|
|
|
config NEEDS_SYSCALL_FOR_CMPXCHG
|
|
bool
|
|
help
|
|
SMP on a pre-ARMv6 processor? Well OK then.
|
|
Forget about fast user space cmpxchg support.
|
|
It is just not possible.
|
|
|
|
config OUTER_CACHE
|
|
bool
|
|
default n
|
|
|
|
config CACHE_FEROCEON_L2
|
|
bool "Enable the Feroceon L2 cache controller"
|
|
depends on ARCH_KIRKWOOD || ARCH_MV78XX0
|
|
default y
|
|
select OUTER_CACHE
|
|
help
|
|
This option enables the Feroceon L2 cache controller.
|
|
|
|
config CACHE_L2X0
|
|
bool "Enable the L2x0 outer cache controller"
|
|
depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176
|
|
default y
|
|
select OUTER_CACHE
|
|
help
|
|
This option enables the L2x0 PrimeCell.
|
|
|
|
config CACHE_XSC3L2
|
|
bool "Enable the L2 cache on XScale3"
|
|
depends on CPU_XSC3
|
|
default y
|
|
select OUTER_CACHE
|
|
help
|
|
This option enables the L2 cache on XScale3.
|