linux-hardened/Documentation/powerpc/zImage_layout.txt
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

47 lines
1.6 KiB
Text

Information about the Linux/PPC kernel images
=====================================================================
Please mail me (Cort Dougan, cort@fsmlabs.com) if you have questions,
comments or corrections.
This document is meant to answer several questions I've had about how
the PReP system boots and how Linux/PPC interacts with that mechanism.
It would be nice if we could have information on how other architectures
boot here as well. If you have anything to contribute, please
let me know.
1. PReP boot file
This is the file necessary to boot PReP systems from floppy or
hard drive. The firmware reads the PReP partition table entry
and will load the image accordingly.
To boot the zImage, copy it onto a floppy with dd if=zImage of=/dev/fd0h1440
or onto a PReP hard drive partition with dd if=zImage of=/dev/sda4
assuming you've created a PReP partition (type 0x41) with fdisk on
/dev/sda4.
The layout of the image format is:
0x0 +------------+
| | PReP partition table entry
| |
0x400 +------------+
| | Bootstrap program code + data
| |
| |
+------------+
| | compressed kernel, elf header removed
+------------+
| | initrd (if loaded)
+------------+
| | Elf section table for bootstrap program
+------------+
2. MBX boot file
The MBX boards can load an elf image, and relocate it to the
proper location in memory - it copies the image to the location it was
linked at.