Kashyap, Desai 9982f59450 [SCSI] mpt2sas: Add support in the driver to check for valid response info ... Add support in the driver to check for valid response info in the scsi state, then check to see if the response code is MPI2_SCSITASKMGMT_RSP_INVALID_FRAME; when this condition occurrs, the driver will return DID_SOFT_ERROR. A return code of DID_SOFT_ERROR will result in a retry at the scsi-mid layer level. An additional change added to obtain the response code from the 1st byte of the response info instead of last. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: Eric Moore <Eric.moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>		2009-10-29 13:03:09 -04:00
..
mpi	[SCSI] mpt2sas: Added mpi2_history.txt for MPI2 headers.	2009-10-02 09:48:03 -05:00
Kconfig	[SCSI] mpt2sas: Copyright change to 2009.	2009-10-02 09:48:15 -05:00
Makefile	[SCSI] mpt2sas v00.100.11.15	2009-03-13 16:08:49 -05:00
mpt2sas_base.c	[SCSI] mpt2sas: Timeout occurred within the HANDSHAKE logic while waiting on firmware to ACK.	2009-10-02 09:49:01 -05:00
mpt2sas_base.h	[SCSI] mpt2sas: Driver will use sas address instead of handle as a lookup	2009-10-29 13:03:08 -04:00
mpt2sas_config.c	[SCSI] mpt2sas: Target Reset will be issued from Interrupt context.	2009-10-02 09:48:38 -05:00
mpt2sas_ctl.c	[SCSI] mpt2sas: Call init_completion on a per request basis.	2009-10-02 09:48:50 -05:00
mpt2sas_ctl.h	[SCSI] mpt2sas: Copyright change to 2009.	2009-10-02 09:48:15 -05:00
mpt2sas_debug.h	[SCSI] mpt2sas: Copyright change to 2009.	2009-10-02 09:48:15 -05:00
mpt2sas_scsih.c	[SCSI] mpt2sas: Add support in the driver to check for valid response info	2009-10-29 13:03:09 -04:00
mpt2sas_transport.c	[SCSI] mpt2sas: Driver will use sas address instead of handle as a lookup	2009-10-29 13:03:08 -04:00