linux-hardened/include/linux/i2c-omap.h
Kevin Hilman c9c7ae4066 I2C: OMAP: remove unused function pointers from pdata
Now that this driver is using runtime PM, there is no longer a need
for the idle/enable/shutdown function pointers in pdata.

Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-10-29 09:37:09 +01:00

40 lines
1.3 KiB
C

#ifndef __I2C_OMAP_H__
#define __I2C_OMAP_H__
#include <linux/platform_device.h>
/*
* Version 2 of the I2C peripheral unit has a different register
* layout and extra registers. The ID register in the V2 peripheral
* unit on the OMAP4430 reports the same ID as the V1 peripheral
* unit on the OMAP3530, so we must inform the driver which IP
* version we know it is running on from platform / cpu-specific
* code using these constants in the hwmod class definition.
*/
#define OMAP_I2C_IP_VERSION_1 1
#define OMAP_I2C_IP_VERSION_2 2
/* struct omap_i2c_bus_platform_data .flags meanings */
#define OMAP_I2C_FLAG_NO_FIFO BIT(0)
#define OMAP_I2C_FLAG_SIMPLE_CLOCK BIT(1)
#define OMAP_I2C_FLAG_16BIT_DATA_REG BIT(2)
#define OMAP_I2C_FLAG_RESET_REGS_POSTIDLE BIT(3)
#define OMAP_I2C_FLAG_APPLY_ERRATA_I207 BIT(4)
#define OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK BIT(5)
#define OMAP_I2C_FLAG_FORCE_19200_INT_CLK BIT(6)
/* how the CPU address bus must be translated for I2C unit access */
#define OMAP_I2C_FLAG_BUS_SHIFT_NONE 0
#define OMAP_I2C_FLAG_BUS_SHIFT_1 BIT(7)
#define OMAP_I2C_FLAG_BUS_SHIFT_2 BIT(8)
#define OMAP_I2C_FLAG_BUS_SHIFT__SHIFT 7
struct omap_i2c_bus_platform_data {
u32 clkrate;
u32 rev;
u32 flags;
void (*set_mpu_wkup_lat)(struct device *dev, long set);
};
#endif