linux-hardened/drivers/gpu/drm/sun4i
Paul Kocialkowski ae56bfbdad
drm/sun4i: backend: Avoid counting YUV planes that use the frontend
Our hardware has a limited number of YUV planes (usually 1) that can be
supported using the backend only. However, YUV planes can also be
supported by the frontend and must then not be counted when checking for
that limitation.

Only count the YUV plane when the frontend is not used.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-15-paul.kocialkowski@bootlin.com
2018-11-27 09:51:54 +01:00
..
Kconfig drm/sun4i: fix build failure with CONFIG_DRM_SUN8I_MIXER=m 2018-07-12 09:35:19 +02:00
Makefile BackMerge v4.18-rc7 into drm-next 2018-07-30 10:39:22 +10:00
sun4i_backend.c drm/sun4i: backend: Avoid counting YUV planes that use the frontend 2018-11-27 09:51:54 +01:00
sun4i_backend.h drm/sun4i: backend: Add a helper and a list for supported formats 2018-11-27 09:33:34 +01:00
sun4i_crtc.c drm/sun4i: Use drm_crtc_mask() 2018-07-02 18:45:56 +03:00
sun4i_crtc.h drm/sun4i: abstract a engine type 2017-06-01 09:47:23 +02:00
sun4i_dotclock.c drm/sun4i: Fix an ulong overflow in the dotclock driver 2018-10-19 11:50:25 +02:00
sun4i_dotclock.h
sun4i_drv.c drm/sun4i: Use drm_fbdev_generic_setup() 2018-11-01 15:25:11 +01:00
sun4i_drv.h drm/sun4i: Add a driver for the display frontend 2018-01-22 15:15:38 +01:00
sun4i_framebuffer.c drm/sun4i: Use drm_fbdev_generic_setup() 2018-11-01 15:25:11 +01:00
sun4i_framebuffer.h drm/sun4i: Use drm_fbdev_generic_setup() 2018-11-01 15:25:11 +01:00
sun4i_frontend.c drm/sun4i: frontend: Add a helper and a list for supported formats 2018-11-27 09:33:37 +01:00
sun4i_frontend.h drm/sun4i: frontend: Add a helper and a list for supported formats 2018-11-27 09:33:37 +01:00
sun4i_hdmi.h drm/sun4i: hdmi: Document PAD_CTRL1 output invert bits 2017-10-16 09:54:21 +02:00
sun4i_hdmi_ddc_clk.c drm/sun4i: tcon: Don't rely on encoders to set the TCON mode 2017-10-17 19:49:13 +02:00
sun4i_hdmi_enc.c drm: drop _mode_ from drm_mode_connector_attach_encoder 2018-07-13 18:40:27 +02:00
sun4i_hdmi_i2c.c drm/sun4i: hdmi: Add support for controller hardware variants 2017-10-11 09:53:33 +02:00
sun4i_hdmi_tmds_clk.c drm/sun4i: hdmi: Fix double flag assignation 2018-10-29 14:19:51 +01:00
sun4i_layer.c drm/sun4i: frontend: Replace ARGB with XRGB as supported format 2018-11-27 09:30:51 +01:00
sun4i_layer.h drm/sun4i: backend: Assign the pipes automatically 2018-02-22 16:19:52 +01:00
sun4i_lvds.c drm/sun4i: tcon: fix check of tcon->panel null pointer 2018-10-08 11:20:50 +02:00
sun4i_lvds.h drm/sun4i: Add LVDS support 2018-01-04 20:37:17 +01:00
sun4i_rgb.c drm/sun4i: tcon: fix check of tcon->panel null pointer 2018-10-08 11:20:50 +02:00
sun4i_rgb.h drm/sun4i: rgb: Pass tcon pointer when initializing RGB encoder 2017-03-07 22:18:24 +01:00
sun4i_tcon.c drm/sun4i: tcon: Support an active-low DE signal with RGB interface 2018-11-09 08:31:28 +01:00
sun4i_tcon.h drm/sun4i: tcon: Support an active-low DE signal with RGB interface 2018-11-09 08:31:28 +01:00
sun4i_tv.c drm: drop _mode_ from drm_mode_connector_attach_encoder 2018-07-13 18:40:27 +02:00
sun6i_drc.c headers: separate linux/mod_devicetable.h from linux/platform_device.h 2018-07-07 17:52:26 +02:00
sun6i_mipi_dphy.c drm/sun4i: Add Allwinner A31 MIPI-DSI controller support 2018-04-11 13:19:17 +02:00
sun6i_mipi_dsi.c drm: drop _mode_ from drm_mode_connector_attach_encoder 2018-07-13 18:40:27 +02:00
sun6i_mipi_dsi.h drm/sun4i: Add Allwinner A31 MIPI-DSI controller support 2018-04-11 13:19:17 +02:00
sun8i_csc.c drm/sun4i: Add basic support for DE3 2018-11-05 11:48:23 +01:00
sun8i_csc.h drm/sun4i: Add DE2 CSC library 2017-12-05 13:22:44 +01:00
sun8i_dw_hdmi.c drm/sun4i: Add support for Synopsys HDMI PHY 2018-11-05 11:49:05 +01:00
sun8i_dw_hdmi.h drm/sun4i: Add support for Synopsys HDMI PHY 2018-11-05 11:49:05 +01:00
sun8i_hdmi_phy.c drm/sun4i: Add support for H6 HDMI PHY 2018-11-05 11:49:05 +01:00
sun8i_hdmi_phy_clk.c drm/sun4i: Add support for second clock parent to DW HDMI PHY clk driver 2018-06-27 21:44:02 +02:00
sun8i_mixer.c drm/sun4i: Add support for H6 DE3 mixer 0 2018-11-05 11:49:03 +01:00
sun8i_mixer.h drm/sun4i: Add basic support for DE3 2018-11-05 11:48:23 +01:00
sun8i_tcon_top.c drm: sun4i: add support for H6 TCON TOP 2018-11-05 11:49:06 +01:00
sun8i_tcon_top.h drm/sun4i: tcon-top: Add helpers for mux switching 2018-07-11 09:54:54 +02:00
sun8i_ui_layer.c drm/sun4i: wait on implicit fence before display 2018-11-22 10:07:26 +01:00
sun8i_ui_layer.h drm/sun4i: Rework DE2 register defines 2018-11-05 10:34:43 +01:00
sun8i_ui_scaler.c drm/sun4i: Add basic support for DE3 2018-11-05 11:48:23 +01:00
sun8i_ui_scaler.h drm/sun4i: Add basic support for DE3 2018-11-05 11:48:23 +01:00
sun8i_vi_layer.c drm/sun4i: wait on implicit fence before display 2018-11-22 10:07:26 +01:00
sun8i_vi_layer.h drm/sun4i: Add basic support for DE3 2018-11-05 11:48:23 +01:00
sun8i_vi_scaler.c drm/sun4i: Add basic support for DE3 2018-11-05 11:48:23 +01:00
sun8i_vi_scaler.h drm/sun4i: Add basic support for DE3 2018-11-05 11:48:23 +01:00
sunxi_engine.h drm/sun4i: Fix build warnings in sunxi_engine.h 2018-01-23 10:45:01 +01:00