linux-hardened/arch/arm/mach-omap2/pm-debug.c
Kevin Hilman 8bd2294922 OMAP2/3: PM: push core PM code from linux-omap
This patch is to sync the core linux-omap PM code with mainline.  This
code has evolved and been used for a while the linux-omap tree, but
the attempt here is to finally get this into mainline.

Following this will be a series of patches from the 'PM branch' of the
linux-omap tree to add full PM hardware support from the linux-omap
tree.

Much of this PM core code was written by Jouni Hogander with
significant contributions from Paul Walmsley as well as many others
from Nokia, Texas Instruments and linux-omap community.

Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-05-28 10:58:50 -07:00

152 lines
4 KiB
C

/*
* OMAP Power Management debug routines
*
* Copyright (C) 2005 Texas Instruments, Inc.
* Copyright (C) 2006-2008 Nokia Corporation
*
* Written by:
* Richard Woodruff <r-woodruff2@ti.com>
* Tony Lindgren
* Juha Yrjola
* Amit Kucheria <amit.kucheria@nokia.com>
* Igor Stoppa <igor.stoppa@nokia.com>
* Jouni Hogander
*
* Based on pm.c for omap2
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <mach/clock.h>
#include <mach/board.h>
#include "prm.h"
#include "cm.h"
#include "pm.h"
int omap2_pm_debug;
#define DUMP_PRM_MOD_REG(mod, reg) \
regs[reg_count].name = #mod "." #reg; \
regs[reg_count++].val = prm_read_mod_reg(mod, reg)
#define DUMP_CM_MOD_REG(mod, reg) \
regs[reg_count].name = #mod "." #reg; \
regs[reg_count++].val = cm_read_mod_reg(mod, reg)
#define DUMP_PRM_REG(reg) \
regs[reg_count].name = #reg; \
regs[reg_count++].val = __raw_readl(reg)
#define DUMP_CM_REG(reg) \
regs[reg_count].name = #reg; \
regs[reg_count++].val = __raw_readl(reg)
#define DUMP_INTC_REG(reg, off) \
regs[reg_count].name = #reg; \
regs[reg_count++].val = __raw_readl(IO_ADDRESS(0x480fe000 + (off)))
void omap2_pm_dump(int mode, int resume, unsigned int us)
{
struct reg {
const char *name;
u32 val;
} regs[32];
int reg_count = 0, i;
const char *s1 = NULL, *s2 = NULL;
if (!resume) {
#if 0
/* MPU */
DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRM_IRQENABLE_MPU_OFFSET);
DUMP_CM_MOD_REG(MPU_MOD, CM_CLKSTCTRL);
DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTCTRL);
DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTST);
DUMP_PRM_MOD_REG(MPU_MOD, PM_WKDEP);
#endif
#if 0
/* INTC */
DUMP_INTC_REG(INTC_MIR0, 0x0084);
DUMP_INTC_REG(INTC_MIR1, 0x00a4);
DUMP_INTC_REG(INTC_MIR2, 0x00c4);
#endif
#if 0
DUMP_CM_MOD_REG(CORE_MOD, CM_FCLKEN1);
if (cpu_is_omap24xx()) {
DUMP_CM_MOD_REG(CORE_MOD, OMAP24XX_CM_FCLKEN2);
DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
OMAP2_PRCM_CLKEMUL_CTRL_OFFSET);
DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
OMAP2_PRCM_CLKSRC_CTRL_OFFSET);
}
DUMP_CM_MOD_REG(WKUP_MOD, CM_FCLKEN);
DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN1);
DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN2);
DUMP_CM_MOD_REG(WKUP_MOD, CM_ICLKEN);
DUMP_CM_MOD_REG(PLL_MOD, CM_CLKEN);
DUMP_CM_MOD_REG(PLL_MOD, CM_AUTOIDLE);
DUMP_PRM_MOD_REG(CORE_MOD, PM_PWSTST);
#endif
#if 0
/* DSP */
if (cpu_is_omap24xx()) {
DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_FCLKEN);
DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_ICLKEN);
DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_IDLEST);
DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_AUTOIDLE);
DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSEL);
DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSTCTRL);
DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTCTRL);
DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTST);
DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTCTRL);
DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTST);
}
#endif
} else {
DUMP_PRM_MOD_REG(CORE_MOD, PM_WKST1);
if (cpu_is_omap24xx())
DUMP_PRM_MOD_REG(CORE_MOD, OMAP24XX_PM_WKST2);
DUMP_PRM_MOD_REG(WKUP_MOD, PM_WKST);
DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
#if 1
DUMP_INTC_REG(INTC_PENDING_IRQ0, 0x0098);
DUMP_INTC_REG(INTC_PENDING_IRQ1, 0x00b8);
DUMP_INTC_REG(INTC_PENDING_IRQ2, 0x00d8);
#endif
}
switch (mode) {
case 0:
s1 = "full";
s2 = "retention";
break;
case 1:
s1 = "MPU";
s2 = "retention";
break;
case 2:
s1 = "MPU";
s2 = "idle";
break;
}
if (!resume)
#ifdef CONFIG_NO_HZ
printk(KERN_INFO
"--- Going to %s %s (next timer after %u ms)\n", s1, s2,
jiffies_to_msecs(get_next_timer_interrupt(jiffies) -
jiffies));
#else
printk(KERN_INFO "--- Going to %s %s\n", s1, s2);
#endif
else
printk(KERN_INFO "--- Woke up (slept for %u.%03u ms)\n",
us / 1000, us % 1000);
for (i = 0; i < reg_count; i++)
printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
}