kpriv/linux-hardened
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
linux-hardened/drivers/scsi
History
Salyzyn, Mark 8e31e607ea [SCSI] aacraid: do not set valid bit in sense information 
Luben Tuikov [mailto:ltuikov@yahoo.com] sez:
> Just as in your case and Tony's case, which I presume
> uses the same RAID firmware vendor, it would've
> probably been better if the RAID firmware vendor
> fixed the firmware to not set the VALID bit if the
> INFORMATION field is not valid.

Point taken regarding the aacraid driver. Dropped the VALID bit, and
then did some cleanup/simplification of the set_sense procedure and
the associated parameters. Mike did some preliminary tests when the
VALID bit was dropped before the 'Re: [PATCH] [SCSI] sd: make error
handling more robust' patches came on the scene. The change in the
SCSI subsystem does make this enclosed aacraid patch unnecessary, so
this aacraid patch is merely post battle ground cleanup. If the
simplification is an issue, repugnant, too much for a back-port to the
stable trees or clouds the point, this patch could be happily
distilled down to:

diff -ru a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
--- a/drivers/scsi/aacraid/aachba.c     2008-02-06 16:26:45.834938955 -0500
+++ b/drivers/scsi/aacraid/aachba.c     2008-02-06 16:32:01.109035329 -0500
@@ -865,7 +865,7 @@
                         u32 residue)
 {
-        sense_buf[0] = 0xF0;    /* Sense data valid, err code 70h (current error) */
+        sense_buf[0] = 0x70;    /* Sense data invalid, err code 70h (current error) */
         sense_buf[1] = 0;       /* Segment number, always zero */

         if (incorrect_length) {

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-07 18:31:51 -06:00
..
aacraid [SCSI] aacraid: do not set valid bit in sense information 2008-02-07 18:31:51 -06:00
aic7xxx Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial 2008-02-04 07:58:52 -08:00
aic7xxx_old
aic94xx [SCSI] libsas: abstract STP task status into a function 2008-01-25 11:47:23 -06:00
arcmsr [SCSI] arcmsr: updates (1.20.00.15) 2008-02-07 18:02:44 -06:00
arm [SCSI] arm: convert to accessors and !use_sg cleanup 2008-02-07 18:02:34 -06:00
dpt [SCSI] dpt: whitespace cleanup 2007-04-01 10:10:04 -05:00
ibmvscsi Remove pointless casts from void pointers 2008-02-06 10:41:01 -08:00
libsas Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 2008-01-25 17:19:08 -08:00
lpfc Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial 2008-02-04 07:58:52 -08:00
megaraid scsi: megaraid: trivial drop duplicate mutex.h include 2008-02-06 11:15:41 -08:00
pcmcia pcmcia: convert some internal-only ioaddr_t to unsigned int 2008-02-05 09:44:08 -08:00
qla2xxx [SCSI] qla2xxx: Update version number to 8.02.00-k8. 2008-02-07 18:02:40 -06:00
qla4xxx [SCSI] qla4xxx: add async scan support 2008-02-07 18:02:35 -06:00
sym53c8xx_2 [SCSI] sym53c8xx: fix resid calculation 2008-02-07 18:02:34 -06:00
.gitignore [SCSI] 53c7xx: fix removal fallout 2008-01-11 18:22:30 -06:00
3w-9xxx.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
3w-9xxx.h [SCSI] 3w-9xxx: add support for 9690SA 2007-07-21 08:57:40 -05:00
3w-xxxx.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
3w-xxxx.h [SCSI] 3ware 8000 serialize reset code 2007-01-06 09:18:00 -06:00
53c700.c [SCSI] replace sizeof sense_buffer with SCSI_SENSE_BUFFERSIZE 2008-01-23 11:29:27 -06:00
53c700.h [SCSI] 53c700: m68k support for the 53c700 SCSI core 2007-06-17 16:15:56 -05:00
53c700.scr
53c700_d.h_shipped
a100u2w.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
a100u2w.h [SCSI] a100u2w: Convert into Linux style 2007-06-17 16:09:29 -05:00
a2091.c cleanup after APUS removal 2008-02-06 10:41:01 -08:00
a2091.h [SCSI] wd33c93: Scsi_Cmnd convertion 2006-09-12 17:12:31 -05:00
a3000.c cleanup after APUS removal 2008-02-06 10:41:01 -08:00
a3000.h [SCSI] wd33c93: Scsi_Cmnd convertion 2006-09-12 17:12:31 -05:00
a4000t.c [SCSI] kmalloc + memset conversion to kzalloc 2007-10-12 14:41:00 -04:00
advansys.c [SCSI] advansys: make 3 functions static 2008-02-07 18:02:43 -06:00
aha152x.c [SCSI] aha152x: Use scsi_eh API for REQUEST_SENSE invocation 2008-01-11 18:22:34 -06:00
aha152x.h [SCSI] aha152x: fix debug mode symbol conflict 2007-08-04 09:11:06 -05:00
aha1542.c MAINTAINERS: remove Adam Fritzler, remove his email address in other sources 2008-02-03 16:36:24 +02:00
aha1542.h
aha1740.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
aha1740.h
aic7xxx_old.c Remove pointless casts from void pointers 2008-02-06 10:41:01 -08:00
atari_dma_emul.c IRQ: Maintain regs pointer globally rather than passing to IRQ handlers 2006-10-05 15:10:12 +01:00
atari_NCR5380.c [SCSI] atari_NCR5380, sun3_NCR5380: operator precedence fix 2008-01-11 18:28:57 -06:00
atari_scsi.c [SCSI] NCR5380: Fix bugs and canonicalize irq handler usage 2007-11-25 12:19:26 +02:00
atari_scsi.h m68k: Atari SCSI driver compile fixes 2007-05-04 17:59:05 -07:00
atp870u.c [SCSI] atp870u: convert to accessors and !use_sg cleanup 2008-01-11 18:22:38 -06:00
atp870u.h
BusLogic.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
BusLogic.h [SCSI] BusLogic: Replace 'boolean' by 'bool' 2007-02-07 18:32:29 -05:00
bvme6000_scsi.c [SCSI] kmalloc + memset conversion to kzalloc 2007-10-12 14:41:00 -04:00
ch.c [SCSI] ch: remove forward declarations 2008-01-25 09:22:12 -06:00
constants.c [SCSI] Add Documentation and integrate into docbook build 2008-01-11 18:22:40 -06:00
dc395x.c [SCSI] dc395x: fix uninitialized var warning 2008-02-07 18:02:43 -06:00
dc395x.h
dmx3191d.c [SCSI] pci_module_init conversion in scsi subsystem 2006-09-26 11:35:32 -07:00
dpt_i2o.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
dpti.h revert "dpt_i2o: convert to SCSI hotplug model" 2007-12-10 19:43:54 -08:00
dtc.c [SCSI] NCR5380: Fix bugs and canonicalize irq handler usage 2007-11-25 12:19:26 +02:00
dtc.h
eata.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
eata_generic.h [SCSI] eata_pio: Remove FALSE/TRUE defines 2007-03-20 11:27:03 -05:00
eata_pio.c [SCSI] aic7xxx_old, eata_pio, ips, libsas: don't zero out sense_buffer in queuecommand 2008-01-23 11:29:26 -06:00
eata_pio.h
esp_scsi.c esp_scsi: fix reset cleanup spinlock recursion 2007-12-10 19:43:55 -08:00
esp_scsi.h [SCSI] ESP: Revert ESP_BUS_TIMEOUT back down to 250 2007-07-31 10:51:25 -05:00
fd_mcs.c [SCSI] fd_mcs: convert to accessors and !use_sg cleanup 2008-01-11 18:22:35 -06:00
fdomain.c [SG] Update drivers to use sg helpers 2007-10-22 21:19:53 +02:00
fdomain.h
FlashPoint.c FlashPoint, use BIT instead of BITW 2007-10-19 11:53:42 -07:00
g_NCR5380.c [SCSI] NCR5380: Fix bugs and canonicalize irq handler usage 2007-11-25 12:19:26 +02:00
g_NCR5380.h
g_NCR5380_mmio.c
gdth.c [SCSI] gdth: kill unneeded 'irq' argument 2008-01-11 18:28:14 -06:00
gdth.h [SCSI] gdth: !use_sg cleanup and use of scsi accessors 2007-10-12 14:56:13 -04:00
gdth_ioctl.h
gdth_proc.c [SCSI] gdth: Move members from SCp to gdth_cmndinfo, stage 2 2007-10-12 14:56:09 -04:00
gdth_proc.h [SCSI] gdth: clean up host private data 2007-10-12 14:55:46 -04:00
gvp11.c cleanup after APUS removal 2008-02-06 10:41:01 -08:00
gvp11.h [SCSI] wd33c93: Scsi_Cmnd convertion 2006-09-12 17:12:31 -05:00
hosts.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
hptiop.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
hptiop.h [SCSI] hptiop: add more adapter models and other fixes 2008-01-11 18:28:06 -06:00
ibmmca.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
ide-scsi.c ide: add ide_read_[alt]status() inline helpers 2008-02-06 02:57:51 +01:00
imm.c [SCSI] imm: convert to accessors and !use_sg cleanup 2008-01-11 18:22:41 -06:00
imm.h Remove all inclusions of <linux/config.h> 2006-10-04 03:38:54 -04:00
in2000.c [SCSI] in2000: convert to accessors and !use_sg cleanup 2008-01-11 18:22:36 -06:00
in2000.h
initio.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
initio.h [SCSI] initio: Convert into a real Linux driver and update to modern style 2007-05-22 11:08:56 -05:00
ipr.c drivers/scsi/: Spelling fixes 2008-02-03 17:28:22 +02:00
ipr.h [SCSI] ipr: Use PCI-E reset API for new ipr adapter 2007-05-08 11:54:40 -05:00
ips.c drivers/scsi/: Spelling fixes 2008-02-03 17:28:22 +02:00
ips.h [SCSI] ips: trim trailing whitespace 2008-01-11 18:27:59 -06:00
iscsi_tcp.c [SCSI] iscsi: fix up iscsi printk prefix 2008-02-07 18:02:37 -06:00
iscsi_tcp.h [SCSI] iscsi_tcp: enable sg chaining 2008-01-11 18:28:48 -06:00
jazz_esp.c [SCSI] esp: use shost_priv 2007-05-31 17:30:04 -04:00
Kconfig [SCSI] ses: add new Enclosure ULD 2008-02-07 18:04:10 -06:00
lasi700.c some kmalloc/memset ->kzalloc (tree wide) 2007-07-19 10:04:50 -07:00
libiscsi.c [SCSI] libiscsi: fix session age rollover and remove cid encoding 2008-02-07 18:02:37 -06:00
libsrp.c [SCSI] implement scsi_data_buffer 2008-01-30 13:03:40 -06:00
mac53c94.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
mac53c94.h
mac_scsi.c [SCSI] NCR5380: Fix bugs and canonicalize irq handler usage 2007-11-25 12:19:26 +02:00
mac_scsi.h
Makefile [SCSI] ses: add new Enclosure ULD 2008-02-07 18:04:10 -06:00
megaraid.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
megaraid.h [SCSI] megaraid: fix warnings when CONFIG_PROC_FS=n 2007-05-08 11:15:08 -05:00
mesh.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
mesh.h
mvme16x_scsi.c [SCSI] kmalloc + memset conversion to kzalloc 2007-10-12 14:41:00 -04:00
mvme147.c [PATCH] remove many unneeded #includes of sched.h 2007-02-14 08:09:54 -08:00
mvme147.h [SCSI] wd33c93: Scsi_Cmnd convertion 2006-09-12 17:12:31 -05:00
ncr53c8xx.c [SCSI] ncr53c8xx: fix sense_buffer access bug 2008-01-30 13:03:39 -06:00
ncr53c8xx.h [SCSI] ncr53c8xx: Call scsi_host_put in release 2007-10-12 14:51:18 -04:00
NCR53c406a.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
NCR5380.c [SCSI] NCR5380: fix section mismatch 2008-01-23 13:44:31 -06:00
NCR5380.h [SCSI] NCR5380: Use scsi_eh API for REQUEST_SENSE invocation 2007-10-12 14:55:07 -04:00
NCR_D700.c [SCSI] kmalloc + memset conversion to kzalloc 2007-10-12 14:41:00 -04:00
NCR_D700.h
NCR_Q720.c some kmalloc/memset ->kzalloc (tree wide) 2007-07-19 10:04:50 -07:00
NCR_Q720.h
nsp32.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
nsp32.h define global BIT macro 2007-10-19 11:53:42 -07:00
nsp32_debug.c
nsp32_io.h
osst.c [SCSI] osst: fix if (...) \n #if... cases missing semicolons when false 2007-10-27 14:31:06 -05:00
osst.h [SCSI] osst: Use mutex instead of semaphore 2007-10-12 14:50:55 -04:00
osst_detect.h
osst_options.h
pas16.c [SCSI] NCR5380: Fix bugs and canonicalize irq handler usage 2007-11-25 12:19:26 +02:00
pas16.h
ppa.c [SCSI] ppa: convert to accessors and !use_sg cleanup 2008-01-11 18:22:41 -06:00
ppa.h Remove all inclusions of <linux/config.h> 2006-10-04 03:38:54 -04:00
ps3rom.c [SCSI] ps3rom: sector size should be 512 bytes 2008-02-07 18:02:33 -06:00
ql1040_fw.h
ql1280_fw.h
ql12160_fw.h
qla1280.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
qla1280.h [SCSI] qla1280: eliminate wasted space in request and response ring 2007-10-23 12:35:35 -04:00
qlogicfas.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
qlogicfas408.c [SG] Update drivers to use sg helpers 2007-10-22 21:19:53 +02:00
qlogicfas408.h [SCSI] Scsi_Cmnd conversion in qlogicfas408 driver 2006-10-25 15:11:55 -07:00
qlogicpti.c [SCSI] replace sizeof sense_buffer with SCSI_SENSE_BUFFERSIZE 2008-01-23 11:29:27 -06:00
qlogicpti.h [SCSI] qlogicpti: Add a slave_configure method 2007-10-12 14:52:38 -04:00
qlogicpti_asm.c [SPARC]: Fix some section mismatch warnings in sparc drivers. 2006-10-17 19:28:51 -07:00
raid_class.c [SCSI] raid class: handle component-add errors 2006-10-04 13:27:26 -05:00
script_asm.pl
scsi.c [SCSI] kernel-doc: fix scsi docbook 2008-02-07 18:02:42 -06:00
scsi.h
scsi_debug.c [SCSI] scsi_debug: add XDWRITEREAD_10 support 2008-01-30 13:14:25 -06:00
scsi_debug.h
scsi_devinfo.c [SCSI] kernel-doc: use correct function name 2008-01-11 18:22:44 -06:00
scsi_error.c [SCSI] bidirectional command support 2008-01-30 13:03:41 -06:00
scsi_ioctl.c [SCSI] sd,sr: add early detection of medium not present 2008-01-11 18:22:50 -06:00
scsi_lib.c [SCSI] fix BUG when sum(scatterlist) > bufflen 2008-02-07 18:02:44 -06:00
scsi_lib_dma.c [SCSI] don't build scsi_dma_{map,unmap} for !HAS_DMA 2007-07-14 19:28:10 -05:00
scsi_logging.h
scsi_module.c
scsi_netlink.c [NETNS]: Consolidate kernel netlink socket destruction. 2008-01-28 15:08:07 -08:00
scsi_priv.h [SCSI] don't use __GFP_DMA for sense buffers if not required 2008-01-23 11:37:44 -06:00
scsi_proc.c [SCSI] Add Documentation and integrate into docbook build 2008-01-11 18:22:40 -06:00
scsi_sas_internal.h
scsi_scan.c [SCSI] add missing transport configure points for target and host 2008-01-23 11:29:17 -06:00
scsi_sysctl.c [SCSI] small cleanups 2007-07-18 11:16:32 -05:00
scsi_sysfs.c [SCSI] add missing transport configure points for target and host 2008-01-23 11:29:17 -06:00
scsi_tgt_if.c [SCSI] tgt: convert to use the data buffer accessors 2008-01-11 18:22:30 -06:00
scsi_tgt_lib.c drivers/scsi/: Spelling fixes 2008-02-03 17:28:22 +02:00
scsi_tgt_priv.h [SCSI] tgt: add I_T nexus support 2007-10-12 14:37:50 -04:00
scsi_transport_api.h
scsi_transport_fc.c [SCSI] Add Documentation and integrate into docbook build 2008-01-11 18:22:40 -06:00
scsi_transport_fc_internal.h [SCSI] fc_transport: add target driver support 2007-10-12 14:46:58 -04:00
scsi_transport_iscsi.c [SCSI] iscsi: bump version to 2.0-868 2008-02-07 18:02:38 -06:00
scsi_transport_sas.c drivers/scsi/: Spelling fixes 2008-02-03 17:28:22 +02:00
scsi_transport_spi.c [SCSI] scsi_transport_spi: convert to attribute groups 2008-01-23 11:29:18 -06:00
scsi_transport_srp.c [SCSI] docbook and kernel-doc updates 2008-01-11 18:22:45 -06:00
scsi_transport_srp_internal.h [SCSI] scsi_transport_srp: remove tgt dependencies 2007-10-12 14:38:09 -04:00
scsi_typedefs.h
scsi_wait_scan.c [SCSI] Add ability to scan scsi busses asynchronously 2006-10-11 13:44:25 -05:00
scsicam.c [SCSI] Add Documentation and integrate into docbook build 2008-01-11 18:22:40 -06:00
sd.c [SCSI] sd: handle bad lba in sense information 2008-02-07 18:02:41 -06:00
ses.c [SCSI] ses: add new Enclosure ULD 2008-02-07 18:04:10 -06:00
sg.c blktrace: Add blktrace ioctls to SCSI generic devices 2008-01-28 10:04:46 +01:00
sgiwd93.c [SCSI] sgiwd93: use cached memory access to make driver work on IP28 2008-01-30 13:03:39 -06:00
sim710.c Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 2007-07-22 11:36:49 -07:00
sni_53c710.c [SCSI] sni_53c710: Cleanup 2007-07-14 19:12:15 -05:00
sr.c [SCSI] sr: fix test unit ready responses 2008-02-07 18:02:44 -06:00
sr.h [SCSI] sr: fix test unit ready responses 2008-02-07 18:02:44 -06:00
sr_ioctl.c [SCSI] sr: fix test unit ready responses 2008-02-07 18:02:44 -06:00
sr_vendor.c [PATCH] getting rid of all casts of k[cmz]alloc() calls 2006-12-13 09:05:58 -08:00
st.c [SCSI] st: convert to unlocked_ioctl 2008-01-23 11:29:29 -06:00
st.h [SCSI] st: Use mutex instead of semaphore 2007-07-31 10:44:01 -05:00
st_options.h
stex.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
sun3_NCR5380.c [SCSI] atari_NCR5380, sun3_NCR5380: operator precedence fix 2008-01-11 18:28:57 -06:00
sun3_scsi.c [SCSI] NCR5380: Fix bugs and canonicalize irq handler usage 2007-11-25 12:19:26 +02:00
sun3_scsi.h [PATCH] Sun3 SCSI: Make sun3 scsi drivers compile/work again 2006-12-09 09:41:18 -08:00
sun3_scsi_vme.c [SCSI] NCR5380: Fix bugs and canonicalize irq handler usage 2007-11-25 12:19:26 +02:00
sun3x_esp.c [SCSI] sun3x_esp: convert to esp_scsi 2008-02-07 18:02:33 -06:00
sun_esp.c [SCSI] esp: use shost_priv 2007-05-31 17:30:04 -04:00
sym53c416.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
sym53c416.h
t128.c [SCSI] NCR5380: Fix bugs and canonicalize irq handler usage 2007-11-25 12:19:26 +02:00
t128.h [SCSI] scsi: t128 scsi_cmnd convertion 2006-11-15 16:43:50 -06:00
tmscsim.c [SCSI] replace sizeof sense_buffer with SCSI_SENSE_BUFFERSIZE 2008-01-23 11:29:27 -06:00
tmscsim.h [SCSI] tmscsim: Further clean-up of the driver 2007-07-14 18:56:33 -05:00
u14-34f.c [SCSI] u14-34f: fix data direction bug 2008-02-07 18:02:44 -06:00
ultrastor.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
ultrastor.h
wd33c93.c [SCSI] wd33c93: convert to accessors and !use_sg cleanup 2008-01-11 18:22:35 -06:00
wd33c93.h Spelling fix: explicitly 2007-10-19 23:22:55 +02:00
wd7000.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
zalon.c
zorro7xx.c m68k: zorro7xx needs <asm/amigahw.h> 2007-11-29 09:24:52 -08:00