linux-hardened/arch/arm/mach-omap2/pdata-quirks.c
Linus Torvalds cf377ad7d4 ARM: SoC platform changes for 3.18
New and updated SoC support. Among the things new for this release are:
 
 - at91: Added support for the new SAMA5D4 SoC, following the earlier SAMA5D3
 - bcm: Added support for BCM63XX family of DSL SoCs
 - hisi: Added support for HiP04 server-class SoC
 - meson: Initial support for the Amlogic Meson6 (aka 8726MX) platform
 - shmobile: added support for new r8a7794 (R-Car E2) automotive SoC
 
 Noteworthy changes to existing SoC support are:
 
 - imx: convert i.MX1 to device tree
 - omap: lots of power management work
 - omap: base support to enable moving to standard UART driver
 - shmobile: lots of progress for multiplatform support, still ongoing
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAVDWVHWCrR//JCVInAQJQVw/+NEfKWh6blDvLEWHpkmBtzdsT3s+r1wwb
 ATtvd1Q7RlOMEbzxc2J87tJ44yHb64mSPBbC4BCGuQsM5IIvM4potmBphl/XxLfd
 b8PNcI6nvLO+FZOcgon0JWmvVnt+vLGKPUWzURXSRjdrpVRg2qyRpW+nPBnvX4HP
 qyzlSskkYzKm7WJQrIV1K3yYwRLrVZdz4DuF340mSFy+4H+uci2Fw91HJ9lKKmPS
 24Klx2Q4n6wfg946WazWtz21HjEBuMzRCq0CGZrwcTJffRyMxa4iq/kqE3xGbPtN
 onuP1gmAM7UOMewEvc1ZLycY7JyZ3mhKnKduqS/QN2JLLQEY2v1iYFnEKP8mHnnw
 ax6RVi91PC2MSLZyPcRtsegSKB9l16I7H+C5pgTOMgsSaqxSG1JtV1qZl3uwhBnE
 GB45KHPvTFojrH2+CqneNTLET1ozKgwtuHkWTG61/puYeap/VlpRU2OWj2mQF2E0
 SiBzmlbUBpSqzjFgVGD4ywKAuVA/WpJtaOB7Qg26GL2QoNKrY/wsUCY8hU742+jE
 b/N6obGcpmjytLkFRHx+AbYc75DHXkPtF4CWawDeQFW30LUeixZJqewQ61a56QF8
 49DbO6J+sR0n3xlteD49QdQJzDCtKw3BV+VQaFRcxqVDq4LJAxtUHJZ7c3iyvzEi
 6Yt+PsqSP7Y=
 =ZHtj
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Arnd Bergmann:
 "New and updated SoC support.  Among the things new for this release
  are:

   - at91: Added support for the new SAMA5D4 SoC, following the earlier
     SAMA5D3
   - bcm: Added support for BCM63XX family of DSL SoCs
   - hisi: Added support for HiP04 server-class SoC
   - meson: Initial support for the Amlogic Meson6 (aka 8726MX) platform
   - shmobile: added support for new r8a7794 (R-Car E2) automotive SoC

  Noteworthy changes to existing SoC support are:

   - imx: convert i.MX1 to device tree
   - omap: lots of power management work
   - omap: base support to enable moving to standard UART driver
   - shmobile: lots of progress for multiplatform support, still
     ongoing"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (171 commits)
  ARM: hisi: depend on ARCH_MULTI_V7
  CNS3xxx: Fix debug UART.
  ARM: at91: fix nommu build regression
  ARM: meson: add basic support for MesonX SoCs
  ARM: meson: debug: add debug UART for earlyprintk support
  irq: Export handle_fasteoi_irq
  ARM: mediatek: Add earlyprintk support for mt6589
  ARM: hisi: Fix platmcpm compilation when ARMv6 is selected
  ARM: debug: fix alphanumerical order on debug uarts
  ARM: at91: document Atmel SMART compatibles
  ARM: at91: add sama5d4 support to sama5_defconfig
  ARM: at91: dt: add device tree file for SAMA5D4ek board
  ARM: at91: dt: add device tree file for SAMA5D4 SoC
  ARM: at91: SAMA5D4 SoC detection code and low level routines
  ARM: at91: introduce basic SAMA5D4 support
  clk: at91: add a driver for the h32mx clock
  ARM: pxa3xx: provide specific platform_devices for all ssp ports
  ARM: pxa: ssp: provide platform_device_id for PXA3xx
  ARM: OMAP4+: Remove static iotable mappings for SRAM
  ARM: OMAP4+: Move SRAM data to DT
  ...
2014-10-08 17:13:04 -04:00

425 lines
11 KiB
C

/*
* Legacy platform_data quirks
*
* Copyright (C) 2013 Texas Instruments
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk.h>
#include <linux/davinci_emac.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <linux/wl12xx.h>
#include <linux/platform_data/pinctrl-single.h>
#include <linux/platform_data/iommu-omap.h>
#include "am35xx.h"
#include "common.h"
#include "common-board-devices.h"
#include "dss-common.h"
#include "control.h"
#include "omap_device.h"
#include "omap-secure.h"
#include "soc.h"
struct pdata_init {
const char *compatible;
void (*fn)(void);
};
struct of_dev_auxdata omap_auxdata_lookup[];
static struct twl4030_gpio_platform_data twl_gpio_auxdata;
#if IS_ENABLED(CONFIG_WL12XX)
static struct wl12xx_platform_data wl12xx __initdata;
static void __init __used legacy_init_wl12xx(unsigned ref_clock,
unsigned tcxo_clock,
int gpio)
{
int res;
wl12xx.board_ref_clock = ref_clock;
wl12xx.board_tcxo_clock = tcxo_clock;
wl12xx.irq = gpio_to_irq(gpio);
res = wl12xx_set_platform_data(&wl12xx);
if (res) {
pr_err("error setting wl12xx data: %d\n", res);
return;
}
}
#else
static inline void legacy_init_wl12xx(unsigned ref_clock,
unsigned tcxo_clock,
int gpio)
{
}
#endif
#ifdef CONFIG_MACH_NOKIA_N8X0
static void __init omap2420_n8x0_legacy_init(void)
{
omap_auxdata_lookup[0].platform_data = n8x0_legacy_init();
}
#else
#define omap2420_n8x0_legacy_init NULL
#endif
#ifdef CONFIG_ARCH_OMAP3
static void __init hsmmc2_internal_input_clk(void)
{
u32 reg;
reg = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1);
reg |= OMAP2_MMCSDIO2ADPCLKISEL;
omap_ctrl_writel(reg, OMAP343X_CONTROL_DEVCONF1);
}
static struct iommu_platform_data omap3_iommu_pdata = {
.reset_name = "mmu",
.assert_reset = omap_device_assert_hardreset,
.deassert_reset = omap_device_deassert_hardreset,
};
static int omap3_sbc_t3730_twl_callback(struct device *dev,
unsigned gpio,
unsigned ngpio)
{
int res;
res = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH,
"wlan pwr");
if (res)
return res;
gpio_export(gpio, 0);
return 0;
}
static void __init omap3_sbc_t3x_usb_hub_init(int gpio, char *hub_name)
{
int err = gpio_request_one(gpio, GPIOF_OUT_INIT_LOW, hub_name);
if (err) {
pr_err("SBC-T3x: %s reset gpio request failed: %d\n",
hub_name, err);
return;
}
gpio_export(gpio, 0);
udelay(10);
gpio_set_value(gpio, 1);
msleep(1);
}
static void __init omap3_sbc_t3730_twl_init(void)
{
twl_gpio_auxdata.setup = omap3_sbc_t3730_twl_callback;
}
static void __init omap3_sbc_t3730_legacy_init(void)
{
omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 136);
omap_ads7846_init(1, 57, 0, NULL);
}
static void __init omap3_sbc_t3530_legacy_init(void)
{
omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
omap_ads7846_init(1, 57, 0, NULL);
}
static void __init omap3_igep0020_legacy_init(void)
{
}
static void __init omap3_evm_legacy_init(void)
{
legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 149);
}
static void __init omap3_zoom_legacy_init(void)
{
legacy_init_wl12xx(WL12XX_REFCLOCK_26, 0, 162);
}
static void am35xx_enable_emac_int(void)
{
u32 v;
v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR |
AM35XX_CPGMAC_C0_MISC_PULSE_CLR | AM35XX_CPGMAC_C0_RX_THRESH_CLR);
omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR);
omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */
}
static void am35xx_disable_emac_int(void)
{
u32 v;
v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR);
omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR);
omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */
}
static struct emac_platform_data am35xx_emac_pdata = {
.interrupt_enable = am35xx_enable_emac_int,
.interrupt_disable = am35xx_disable_emac_int,
};
static void __init am35xx_emac_reset(void)
{
u32 v;
v = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
v &= ~AM35XX_CPGMACSS_SW_RST;
omap_ctrl_writel(v, AM35XX_CONTROL_IP_SW_RESET);
omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */
}
static struct gpio cm_t3517_wlan_gpios[] __initdata = {
{ 56, GPIOF_OUT_INIT_HIGH, "wlan pwr" },
{ 4, GPIOF_OUT_INIT_HIGH, "xcvr noe" },
};
static void __init omap3_sbc_t3517_wifi_init(void)
{
int err = gpio_request_array(cm_t3517_wlan_gpios,
ARRAY_SIZE(cm_t3517_wlan_gpios));
if (err) {
pr_err("SBC-T3517: wl12xx gpios request failed: %d\n", err);
return;
}
gpio_export(cm_t3517_wlan_gpios[0].gpio, 0);
gpio_export(cm_t3517_wlan_gpios[1].gpio, 0);
msleep(100);
gpio_set_value(cm_t3517_wlan_gpios[1].gpio, 0);
}
static void __init omap3_sbc_t3517_legacy_init(void)
{
omap3_sbc_t3x_usb_hub_init(152, "cm-t3517 usb hub");
omap3_sbc_t3x_usb_hub_init(98, "sb-t35 usb hub");
am35xx_emac_reset();
hsmmc2_internal_input_clk();
omap3_sbc_t3517_wifi_init();
legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 145);
omap_ads7846_init(1, 57, 0, NULL);
}
static void __init am3517_evm_legacy_init(void)
{
am35xx_emac_reset();
}
static struct platform_device omap3_rom_rng_device = {
.name = "omap3-rom-rng",
.id = -1,
.dev = {
.platform_data = rx51_secure_rng_call,
},
};
static void __init nokia_n900_legacy_init(void)
{
hsmmc2_internal_input_clk();
if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
if (IS_ENABLED(CONFIG_ARM_ERRATA_430973)) {
pr_info("RX-51: Enabling ARM errata 430973 workaround\n");
/* set IBE to 1 */
rx51_secure_update_aux_cr(BIT(6), 0);
} else {
pr_warn("RX-51: Not enabling ARM errata 430973 workaround\n");
pr_warn("Thumb binaries may crash randomly without this workaround\n");
}
pr_info("RX-51: Registring OMAP3 HWRNG device\n");
platform_device_register(&omap3_rom_rng_device);
}
}
#endif /* CONFIG_ARCH_OMAP3 */
#ifdef CONFIG_ARCH_OMAP4
static void __init omap4_sdp_legacy_init(void)
{
legacy_init_wl12xx(WL12XX_REFCLOCK_26,
WL12XX_TCXOCLOCK_26, 53);
}
static void __init omap4_panda_legacy_init(void)
{
legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 53);
}
static void __init var_som_om44_legacy_init(void)
{
legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 41);
}
#endif
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
static struct iommu_platform_data omap4_iommu_pdata = {
.reset_name = "mmu_cache",
.assert_reset = omap_device_assert_hardreset,
.deassert_reset = omap_device_deassert_hardreset,
};
#endif
#ifdef CONFIG_SOC_AM33XX
static void __init am335x_evmsk_legacy_init(void)
{
legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 31);
}
#endif
#ifdef CONFIG_SOC_OMAP5
static void __init omap5_uevm_legacy_init(void)
{
}
#endif
static struct pcs_pdata pcs_pdata;
void omap_pcs_legacy_init(int irq, void (*rearm)(void))
{
pcs_pdata.irq = irq;
pcs_pdata.rearm = rearm;
}
/*
* GPIOs for TWL are initialized by the I2C bus and need custom
* handing until DSS has device tree bindings.
*/
void omap_auxdata_legacy_init(struct device *dev)
{
if (dev->platform_data)
return;
if (strcmp("twl4030-gpio", dev_name(dev)))
return;
dev->platform_data = &twl_gpio_auxdata;
}
/*
* Few boards still need auxdata populated before we populate
* the dev entries in of_platform_populate().
*/
static struct pdata_init auxdata_quirks[] __initdata = {
#ifdef CONFIG_SOC_OMAP2420
{ "nokia,n800", omap2420_n8x0_legacy_init, },
{ "nokia,n810", omap2420_n8x0_legacy_init, },
{ "nokia,n810-wimax", omap2420_n8x0_legacy_init, },
#endif
#ifdef CONFIG_ARCH_OMAP3
{ "compulab,omap3-sbc-t3730", omap3_sbc_t3730_twl_init, },
#endif
{ /* sentinel */ },
};
struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
#ifdef CONFIG_MACH_NOKIA_N8X0
OF_DEV_AUXDATA("ti,omap2420-mmc", 0x4809c000, "mmci-omap.0", NULL),
#endif
#ifdef CONFIG_ARCH_OMAP3
OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,omap3-padconf", 0x480025a0, "480025a0.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002a00, "48002a00.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,omap2-iommu", 0x5d000000, "5d000000.mmu",
&omap3_iommu_pdata),
/* Only on am3517 */
OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
&am35xx_emac_pdata),
#endif
#ifdef CONFIG_ARCH_OMAP4
OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a31e040, "4a31e040.pinmux", &pcs_pdata),
#endif
#ifdef CONFIG_SOC_OMAP5
OF_DEV_AUXDATA("ti,omap5-padconf", 0x4a002840, "4a002840.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,omap5-padconf", 0x4ae0c840, "4ae0c840.pinmux", &pcs_pdata),
#endif
#ifdef CONFIG_SOC_DRA7XX
OF_DEV_AUXDATA("ti,dra7-padconf", 0x4a003400, "4a003400.pinmux", &pcs_pdata),
#endif
#ifdef CONFIG_SOC_AM43XX
OF_DEV_AUXDATA("ti,am437-padconf", 0x44e10800, "44e10800.pinmux", &pcs_pdata),
#endif
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",
&omap4_iommu_pdata),
OF_DEV_AUXDATA("ti,omap4-iommu", 0x55082000, "55082000.mmu",
&omap4_iommu_pdata),
#endif
{ /* sentinel */ },
};
/*
* Few boards still need to initialize some legacy devices with
* platform data until the drivers support device tree.
*/
static struct pdata_init pdata_quirks[] __initdata = {
#ifdef CONFIG_ARCH_OMAP3
{ "compulab,omap3-sbc-t3517", omap3_sbc_t3517_legacy_init, },
{ "compulab,omap3-sbc-t3530", omap3_sbc_t3530_legacy_init, },
{ "compulab,omap3-sbc-t3730", omap3_sbc_t3730_legacy_init, },
{ "nokia,omap3-n900", nokia_n900_legacy_init, },
{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
{ "isee,omap3-igep0020", omap3_igep0020_legacy_init, },
{ "ti,omap3-evm-37xx", omap3_evm_legacy_init, },
{ "ti,omap3-zoom3", omap3_zoom_legacy_init, },
{ "ti,am3517-evm", am3517_evm_legacy_init, },
#endif
#ifdef CONFIG_ARCH_OMAP4
{ "ti,omap4-sdp", omap4_sdp_legacy_init, },
{ "ti,omap4-panda", omap4_panda_legacy_init, },
{ "variscite,var-dvk-om44", var_som_om44_legacy_init, },
{ "variscite,var-stk-om44", var_som_om44_legacy_init, },
#endif
#ifdef CONFIG_SOC_AM33XX
{ "ti,am335x-evmsk", am335x_evmsk_legacy_init, },
#endif
#ifdef CONFIG_SOC_OMAP5
{ "ti,omap5-uevm", omap5_uevm_legacy_init, },
#endif
{ /* sentinel */ },
};
static void pdata_quirks_check(struct pdata_init *quirks)
{
while (quirks->compatible) {
if (of_machine_is_compatible(quirks->compatible)) {
if (quirks->fn)
quirks->fn();
break;
}
quirks++;
}
}
void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
{
omap_sdrc_init(NULL, NULL);
pdata_quirks_check(auxdata_quirks);
of_platform_populate(NULL, omap_dt_match_table,
omap_auxdata_lookup, NULL);
pdata_quirks_check(pdata_quirks);
}