cd99758ba3
The modern idiom is to use irq_domain to allocate interrupts. This is useful partly to allow further infrastructure to be based on the domains and partly because it makes it much easier to allocate virtual interrupts to devices as we don't need to allocate a contiguous range of interrupt numbers. Convert the wm831x driver over to this infrastructure, using a legacy IRQ mapping if an irq_base is specified in platform data and otherwise using a linear mapping, always registering the interrupts even if they won't ever be used. Only boards which need to use the GPIOs as interrupts should need to use an irq_base. This means that we can't use the MFD irq_base management since the unless we're using an explicit irq_base from platform data we can't rely on a linear mapping of interrupts. Instead we need to map things via the irq_domain - provide a conveniencem function wm831x_irq() to save a small amount of typing when doing so. Looking at this I couldn't clearly see anything the MFD core could do to make this nicer. Since we're not supporting device tree yet there's no meaningful advantage if we don't do this conversion in one, the fact that the interrupt resources are used for repeated IP blocks makes accessor functions for the irq_domain more trouble to do than they're worth. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
668 lines
17 KiB
C
668 lines
17 KiB
C
/*
|
|
* PMU driver for Wolfson Microelectronics wm831x PMICs
|
|
*
|
|
* Copyright 2009 Wolfson Microelectronics PLC.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/err.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/power_supply.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/mfd/wm831x/core.h>
|
|
#include <linux/mfd/wm831x/auxadc.h>
|
|
#include <linux/mfd/wm831x/pmu.h>
|
|
#include <linux/mfd/wm831x/pdata.h>
|
|
|
|
struct wm831x_power {
|
|
struct wm831x *wm831x;
|
|
struct power_supply wall;
|
|
struct power_supply usb;
|
|
struct power_supply battery;
|
|
char wall_name[20];
|
|
char usb_name[20];
|
|
char battery_name[20];
|
|
bool have_battery;
|
|
};
|
|
|
|
static int wm831x_power_check_online(struct wm831x *wm831x, int supply,
|
|
union power_supply_propval *val)
|
|
{
|
|
int ret;
|
|
|
|
ret = wm831x_reg_read(wm831x, WM831X_SYSTEM_STATUS);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (ret & supply)
|
|
val->intval = 1;
|
|
else
|
|
val->intval = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm831x_power_read_voltage(struct wm831x *wm831x,
|
|
enum wm831x_auxadc src,
|
|
union power_supply_propval *val)
|
|
{
|
|
int ret;
|
|
|
|
ret = wm831x_auxadc_read_uv(wm831x, src);
|
|
if (ret >= 0)
|
|
val->intval = ret;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*********************************************************************
|
|
* WALL Power
|
|
*********************************************************************/
|
|
static int wm831x_wall_get_prop(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent);
|
|
struct wm831x *wm831x = wm831x_power->wm831x;
|
|
int ret = 0;
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_ONLINE:
|
|
ret = wm831x_power_check_online(wm831x, WM831X_PWR_WALL, val);
|
|
break;
|
|
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
|
|
ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_WALL, val);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static enum power_supply_property wm831x_wall_props[] = {
|
|
POWER_SUPPLY_PROP_ONLINE,
|
|
POWER_SUPPLY_PROP_VOLTAGE_NOW,
|
|
};
|
|
|
|
/*********************************************************************
|
|
* USB Power
|
|
*********************************************************************/
|
|
static int wm831x_usb_get_prop(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent);
|
|
struct wm831x *wm831x = wm831x_power->wm831x;
|
|
int ret = 0;
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_ONLINE:
|
|
ret = wm831x_power_check_online(wm831x, WM831X_PWR_USB, val);
|
|
break;
|
|
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
|
|
ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_USB, val);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static enum power_supply_property wm831x_usb_props[] = {
|
|
POWER_SUPPLY_PROP_ONLINE,
|
|
POWER_SUPPLY_PROP_VOLTAGE_NOW,
|
|
};
|
|
|
|
/*********************************************************************
|
|
* Battery properties
|
|
*********************************************************************/
|
|
|
|
struct chg_map {
|
|
int val;
|
|
int reg_val;
|
|
};
|
|
|
|
static struct chg_map trickle_ilims[] = {
|
|
{ 50, 0 << WM831X_CHG_TRKL_ILIM_SHIFT },
|
|
{ 100, 1 << WM831X_CHG_TRKL_ILIM_SHIFT },
|
|
{ 150, 2 << WM831X_CHG_TRKL_ILIM_SHIFT },
|
|
{ 200, 3 << WM831X_CHG_TRKL_ILIM_SHIFT },
|
|
};
|
|
|
|
static struct chg_map vsels[] = {
|
|
{ 4050, 0 << WM831X_CHG_VSEL_SHIFT },
|
|
{ 4100, 1 << WM831X_CHG_VSEL_SHIFT },
|
|
{ 4150, 2 << WM831X_CHG_VSEL_SHIFT },
|
|
{ 4200, 3 << WM831X_CHG_VSEL_SHIFT },
|
|
};
|
|
|
|
static struct chg_map fast_ilims[] = {
|
|
{ 0, 0 << WM831X_CHG_FAST_ILIM_SHIFT },
|
|
{ 50, 1 << WM831X_CHG_FAST_ILIM_SHIFT },
|
|
{ 100, 2 << WM831X_CHG_FAST_ILIM_SHIFT },
|
|
{ 150, 3 << WM831X_CHG_FAST_ILIM_SHIFT },
|
|
{ 200, 4 << WM831X_CHG_FAST_ILIM_SHIFT },
|
|
{ 250, 5 << WM831X_CHG_FAST_ILIM_SHIFT },
|
|
{ 300, 6 << WM831X_CHG_FAST_ILIM_SHIFT },
|
|
{ 350, 7 << WM831X_CHG_FAST_ILIM_SHIFT },
|
|
{ 400, 8 << WM831X_CHG_FAST_ILIM_SHIFT },
|
|
{ 450, 9 << WM831X_CHG_FAST_ILIM_SHIFT },
|
|
{ 500, 10 << WM831X_CHG_FAST_ILIM_SHIFT },
|
|
{ 600, 11 << WM831X_CHG_FAST_ILIM_SHIFT },
|
|
{ 700, 12 << WM831X_CHG_FAST_ILIM_SHIFT },
|
|
{ 800, 13 << WM831X_CHG_FAST_ILIM_SHIFT },
|
|
{ 900, 14 << WM831X_CHG_FAST_ILIM_SHIFT },
|
|
{ 1000, 15 << WM831X_CHG_FAST_ILIM_SHIFT },
|
|
};
|
|
|
|
static struct chg_map eoc_iterms[] = {
|
|
{ 20, 0 << WM831X_CHG_ITERM_SHIFT },
|
|
{ 30, 1 << WM831X_CHG_ITERM_SHIFT },
|
|
{ 40, 2 << WM831X_CHG_ITERM_SHIFT },
|
|
{ 50, 3 << WM831X_CHG_ITERM_SHIFT },
|
|
{ 60, 4 << WM831X_CHG_ITERM_SHIFT },
|
|
{ 70, 5 << WM831X_CHG_ITERM_SHIFT },
|
|
{ 80, 6 << WM831X_CHG_ITERM_SHIFT },
|
|
{ 90, 7 << WM831X_CHG_ITERM_SHIFT },
|
|
};
|
|
|
|
static struct chg_map chg_times[] = {
|
|
{ 60, 0 << WM831X_CHG_TIME_SHIFT },
|
|
{ 90, 1 << WM831X_CHG_TIME_SHIFT },
|
|
{ 120, 2 << WM831X_CHG_TIME_SHIFT },
|
|
{ 150, 3 << WM831X_CHG_TIME_SHIFT },
|
|
{ 180, 4 << WM831X_CHG_TIME_SHIFT },
|
|
{ 210, 5 << WM831X_CHG_TIME_SHIFT },
|
|
{ 240, 6 << WM831X_CHG_TIME_SHIFT },
|
|
{ 270, 7 << WM831X_CHG_TIME_SHIFT },
|
|
{ 300, 8 << WM831X_CHG_TIME_SHIFT },
|
|
{ 330, 9 << WM831X_CHG_TIME_SHIFT },
|
|
{ 360, 10 << WM831X_CHG_TIME_SHIFT },
|
|
{ 390, 11 << WM831X_CHG_TIME_SHIFT },
|
|
{ 420, 12 << WM831X_CHG_TIME_SHIFT },
|
|
{ 450, 13 << WM831X_CHG_TIME_SHIFT },
|
|
{ 480, 14 << WM831X_CHG_TIME_SHIFT },
|
|
{ 510, 15 << WM831X_CHG_TIME_SHIFT },
|
|
};
|
|
|
|
static void wm831x_battey_apply_config(struct wm831x *wm831x,
|
|
struct chg_map *map, int count, int val,
|
|
int *reg, const char *name,
|
|
const char *units)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < count; i++)
|
|
if (val == map[i].val)
|
|
break;
|
|
if (i == count) {
|
|
dev_err(wm831x->dev, "Invalid %s %d%s\n",
|
|
name, val, units);
|
|
} else {
|
|
*reg |= map[i].reg_val;
|
|
dev_dbg(wm831x->dev, "Set %s of %d%s\n", name, val, units);
|
|
}
|
|
}
|
|
|
|
static void wm831x_config_battery(struct wm831x *wm831x)
|
|
{
|
|
struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data;
|
|
struct wm831x_battery_pdata *pdata;
|
|
int ret, reg1, reg2;
|
|
|
|
if (!wm831x_pdata || !wm831x_pdata->battery) {
|
|
dev_warn(wm831x->dev,
|
|
"No battery charger configuration\n");
|
|
return;
|
|
}
|
|
|
|
pdata = wm831x_pdata->battery;
|
|
|
|
reg1 = 0;
|
|
reg2 = 0;
|
|
|
|
if (!pdata->enable) {
|
|
dev_info(wm831x->dev, "Battery charger disabled\n");
|
|
return;
|
|
}
|
|
|
|
reg1 |= WM831X_CHG_ENA;
|
|
if (pdata->off_mask)
|
|
reg2 |= WM831X_CHG_OFF_MSK;
|
|
if (pdata->fast_enable)
|
|
reg1 |= WM831X_CHG_FAST;
|
|
|
|
wm831x_battey_apply_config(wm831x, trickle_ilims,
|
|
ARRAY_SIZE(trickle_ilims),
|
|
pdata->trickle_ilim, ®2,
|
|
"trickle charge current limit", "mA");
|
|
|
|
wm831x_battey_apply_config(wm831x, vsels, ARRAY_SIZE(vsels),
|
|
pdata->vsel, ®2,
|
|
"target voltage", "mV");
|
|
|
|
wm831x_battey_apply_config(wm831x, fast_ilims, ARRAY_SIZE(fast_ilims),
|
|
pdata->fast_ilim, ®2,
|
|
"fast charge current limit", "mA");
|
|
|
|
wm831x_battey_apply_config(wm831x, eoc_iterms, ARRAY_SIZE(eoc_iterms),
|
|
pdata->eoc_iterm, ®1,
|
|
"end of charge current threshold", "mA");
|
|
|
|
wm831x_battey_apply_config(wm831x, chg_times, ARRAY_SIZE(chg_times),
|
|
pdata->timeout, ®2,
|
|
"charger timeout", "min");
|
|
|
|
ret = wm831x_reg_unlock(wm831x);
|
|
if (ret != 0) {
|
|
dev_err(wm831x->dev, "Failed to unlock registers: %d\n", ret);
|
|
return;
|
|
}
|
|
|
|
ret = wm831x_set_bits(wm831x, WM831X_CHARGER_CONTROL_1,
|
|
WM831X_CHG_ENA_MASK |
|
|
WM831X_CHG_FAST_MASK |
|
|
WM831X_CHG_ITERM_MASK,
|
|
reg1);
|
|
if (ret != 0)
|
|
dev_err(wm831x->dev, "Failed to set charger control 1: %d\n",
|
|
ret);
|
|
|
|
ret = wm831x_set_bits(wm831x, WM831X_CHARGER_CONTROL_2,
|
|
WM831X_CHG_OFF_MSK |
|
|
WM831X_CHG_TIME_MASK |
|
|
WM831X_CHG_FAST_ILIM_MASK |
|
|
WM831X_CHG_TRKL_ILIM_MASK |
|
|
WM831X_CHG_VSEL_MASK,
|
|
reg2);
|
|
if (ret != 0)
|
|
dev_err(wm831x->dev, "Failed to set charger control 2: %d\n",
|
|
ret);
|
|
|
|
wm831x_reg_lock(wm831x);
|
|
}
|
|
|
|
static int wm831x_bat_check_status(struct wm831x *wm831x, int *status)
|
|
{
|
|
int ret;
|
|
|
|
ret = wm831x_reg_read(wm831x, WM831X_SYSTEM_STATUS);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (ret & WM831X_PWR_SRC_BATT) {
|
|
*status = POWER_SUPPLY_STATUS_DISCHARGING;
|
|
return 0;
|
|
}
|
|
|
|
ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
switch (ret & WM831X_CHG_STATE_MASK) {
|
|
case WM831X_CHG_STATE_OFF:
|
|
*status = POWER_SUPPLY_STATUS_NOT_CHARGING;
|
|
break;
|
|
case WM831X_CHG_STATE_TRICKLE:
|
|
case WM831X_CHG_STATE_FAST:
|
|
*status = POWER_SUPPLY_STATUS_CHARGING;
|
|
break;
|
|
|
|
default:
|
|
*status = POWER_SUPPLY_STATUS_UNKNOWN;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm831x_bat_check_type(struct wm831x *wm831x, int *type)
|
|
{
|
|
int ret;
|
|
|
|
ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
switch (ret & WM831X_CHG_STATE_MASK) {
|
|
case WM831X_CHG_STATE_TRICKLE:
|
|
case WM831X_CHG_STATE_TRICKLE_OT:
|
|
*type = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
|
|
break;
|
|
case WM831X_CHG_STATE_FAST:
|
|
case WM831X_CHG_STATE_FAST_OT:
|
|
*type = POWER_SUPPLY_CHARGE_TYPE_FAST;
|
|
break;
|
|
default:
|
|
*type = POWER_SUPPLY_CHARGE_TYPE_NONE;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm831x_bat_check_health(struct wm831x *wm831x, int *health)
|
|
{
|
|
int ret;
|
|
|
|
ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (ret & WM831X_BATT_HOT_STS) {
|
|
*health = POWER_SUPPLY_HEALTH_OVERHEAT;
|
|
return 0;
|
|
}
|
|
|
|
if (ret & WM831X_BATT_COLD_STS) {
|
|
*health = POWER_SUPPLY_HEALTH_COLD;
|
|
return 0;
|
|
}
|
|
|
|
if (ret & WM831X_BATT_OV_STS) {
|
|
*health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
|
|
return 0;
|
|
}
|
|
|
|
switch (ret & WM831X_CHG_STATE_MASK) {
|
|
case WM831X_CHG_STATE_TRICKLE_OT:
|
|
case WM831X_CHG_STATE_FAST_OT:
|
|
*health = POWER_SUPPLY_HEALTH_OVERHEAT;
|
|
break;
|
|
case WM831X_CHG_STATE_DEFECTIVE:
|
|
*health = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
|
|
break;
|
|
default:
|
|
*health = POWER_SUPPLY_HEALTH_GOOD;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm831x_bat_get_prop(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent);
|
|
struct wm831x *wm831x = wm831x_power->wm831x;
|
|
int ret = 0;
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_STATUS:
|
|
ret = wm831x_bat_check_status(wm831x, &val->intval);
|
|
break;
|
|
case POWER_SUPPLY_PROP_ONLINE:
|
|
ret = wm831x_power_check_online(wm831x, WM831X_PWR_SRC_BATT,
|
|
val);
|
|
break;
|
|
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
|
|
ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_BATT, val);
|
|
break;
|
|
case POWER_SUPPLY_PROP_HEALTH:
|
|
ret = wm831x_bat_check_health(wm831x, &val->intval);
|
|
break;
|
|
case POWER_SUPPLY_PROP_CHARGE_TYPE:
|
|
ret = wm831x_bat_check_type(wm831x, &val->intval);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static enum power_supply_property wm831x_bat_props[] = {
|
|
POWER_SUPPLY_PROP_STATUS,
|
|
POWER_SUPPLY_PROP_ONLINE,
|
|
POWER_SUPPLY_PROP_VOLTAGE_NOW,
|
|
POWER_SUPPLY_PROP_HEALTH,
|
|
POWER_SUPPLY_PROP_CHARGE_TYPE,
|
|
};
|
|
|
|
static const char *wm831x_bat_irqs[] = {
|
|
"BATT HOT",
|
|
"BATT COLD",
|
|
"BATT FAIL",
|
|
"OV",
|
|
"END",
|
|
"TO",
|
|
"MODE",
|
|
"START",
|
|
};
|
|
|
|
static irqreturn_t wm831x_bat_irq(int irq, void *data)
|
|
{
|
|
struct wm831x_power *wm831x_power = data;
|
|
struct wm831x *wm831x = wm831x_power->wm831x;
|
|
|
|
dev_dbg(wm831x->dev, "Battery status changed: %d\n", irq);
|
|
|
|
/* The battery charger is autonomous so we don't need to do
|
|
* anything except kick user space */
|
|
if (wm831x_power->have_battery)
|
|
power_supply_changed(&wm831x_power->battery);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
* Initialisation
|
|
*********************************************************************/
|
|
|
|
static irqreturn_t wm831x_syslo_irq(int irq, void *data)
|
|
{
|
|
struct wm831x_power *wm831x_power = data;
|
|
struct wm831x *wm831x = wm831x_power->wm831x;
|
|
|
|
/* Not much we can actually *do* but tell people for
|
|
* posterity, we're probably about to run out of power. */
|
|
dev_crit(wm831x->dev, "SYSVDD under voltage\n");
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t wm831x_pwr_src_irq(int irq, void *data)
|
|
{
|
|
struct wm831x_power *wm831x_power = data;
|
|
struct wm831x *wm831x = wm831x_power->wm831x;
|
|
|
|
dev_dbg(wm831x->dev, "Power source changed\n");
|
|
|
|
/* Just notify for everything - little harm in overnotifying. */
|
|
if (wm831x_power->have_battery)
|
|
power_supply_changed(&wm831x_power->battery);
|
|
power_supply_changed(&wm831x_power->usb);
|
|
power_supply_changed(&wm831x_power->wall);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static __devinit int wm831x_power_probe(struct platform_device *pdev)
|
|
{
|
|
struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
|
|
struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data;
|
|
struct wm831x_power *power;
|
|
struct power_supply *usb;
|
|
struct power_supply *battery;
|
|
struct power_supply *wall;
|
|
int ret, irq, i;
|
|
|
|
power = kzalloc(sizeof(struct wm831x_power), GFP_KERNEL);
|
|
if (power == NULL)
|
|
return -ENOMEM;
|
|
|
|
power->wm831x = wm831x;
|
|
platform_set_drvdata(pdev, power);
|
|
|
|
usb = &power->usb;
|
|
battery = &power->battery;
|
|
wall = &power->wall;
|
|
|
|
if (wm831x_pdata && wm831x_pdata->wm831x_num) {
|
|
snprintf(power->wall_name, sizeof(power->wall_name),
|
|
"wm831x-wall.%d", wm831x_pdata->wm831x_num);
|
|
snprintf(power->battery_name, sizeof(power->wall_name),
|
|
"wm831x-battery.%d", wm831x_pdata->wm831x_num);
|
|
snprintf(power->usb_name, sizeof(power->wall_name),
|
|
"wm831x-usb.%d", wm831x_pdata->wm831x_num);
|
|
} else {
|
|
snprintf(power->wall_name, sizeof(power->wall_name),
|
|
"wm831x-wall");
|
|
snprintf(power->battery_name, sizeof(power->wall_name),
|
|
"wm831x-battery");
|
|
snprintf(power->usb_name, sizeof(power->wall_name),
|
|
"wm831x-usb");
|
|
}
|
|
|
|
/* We ignore configuration failures since we can still read back
|
|
* the status without enabling the charger.
|
|
*/
|
|
wm831x_config_battery(wm831x);
|
|
|
|
wall->name = power->wall_name;
|
|
wall->type = POWER_SUPPLY_TYPE_MAINS;
|
|
wall->properties = wm831x_wall_props;
|
|
wall->num_properties = ARRAY_SIZE(wm831x_wall_props);
|
|
wall->get_property = wm831x_wall_get_prop;
|
|
ret = power_supply_register(&pdev->dev, wall);
|
|
if (ret)
|
|
goto err_kmalloc;
|
|
|
|
usb->name = power->usb_name,
|
|
usb->type = POWER_SUPPLY_TYPE_USB;
|
|
usb->properties = wm831x_usb_props;
|
|
usb->num_properties = ARRAY_SIZE(wm831x_usb_props);
|
|
usb->get_property = wm831x_usb_get_prop;
|
|
ret = power_supply_register(&pdev->dev, usb);
|
|
if (ret)
|
|
goto err_wall;
|
|
|
|
ret = wm831x_reg_read(wm831x, WM831X_CHARGER_CONTROL_1);
|
|
if (ret < 0)
|
|
goto err_wall;
|
|
power->have_battery = ret & WM831X_CHG_ENA;
|
|
|
|
if (power->have_battery) {
|
|
battery->name = power->battery_name;
|
|
battery->properties = wm831x_bat_props;
|
|
battery->num_properties = ARRAY_SIZE(wm831x_bat_props);
|
|
battery->get_property = wm831x_bat_get_prop;
|
|
battery->use_for_apm = 1;
|
|
ret = power_supply_register(&pdev->dev, battery);
|
|
if (ret)
|
|
goto err_usb;
|
|
}
|
|
|
|
irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "SYSLO"));
|
|
ret = request_threaded_irq(irq, NULL, wm831x_syslo_irq,
|
|
IRQF_TRIGGER_RISING, "System power low",
|
|
power);
|
|
if (ret != 0) {
|
|
dev_err(&pdev->dev, "Failed to request SYSLO IRQ %d: %d\n",
|
|
irq, ret);
|
|
goto err_battery;
|
|
}
|
|
|
|
irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "PWR SRC"));
|
|
ret = request_threaded_irq(irq, NULL, wm831x_pwr_src_irq,
|
|
IRQF_TRIGGER_RISING, "Power source",
|
|
power);
|
|
if (ret != 0) {
|
|
dev_err(&pdev->dev, "Failed to request PWR SRC IRQ %d: %d\n",
|
|
irq, ret);
|
|
goto err_syslo;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) {
|
|
irq = wm831x_irq(wm831x,
|
|
platform_get_irq_byname(pdev,
|
|
wm831x_bat_irqs[i]));
|
|
ret = request_threaded_irq(irq, NULL, wm831x_bat_irq,
|
|
IRQF_TRIGGER_RISING,
|
|
wm831x_bat_irqs[i],
|
|
power);
|
|
if (ret != 0) {
|
|
dev_err(&pdev->dev,
|
|
"Failed to request %s IRQ %d: %d\n",
|
|
wm831x_bat_irqs[i], irq, ret);
|
|
goto err_bat_irq;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
|
|
err_bat_irq:
|
|
for (; i >= 0; i--) {
|
|
irq = platform_get_irq_byname(pdev, wm831x_bat_irqs[i]);
|
|
free_irq(irq, power);
|
|
}
|
|
irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "PWR SRC"));
|
|
free_irq(irq, power);
|
|
err_syslo:
|
|
irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "SYSLO"));
|
|
free_irq(irq, power);
|
|
err_battery:
|
|
if (power->have_battery)
|
|
power_supply_unregister(battery);
|
|
err_usb:
|
|
power_supply_unregister(usb);
|
|
err_wall:
|
|
power_supply_unregister(wall);
|
|
err_kmalloc:
|
|
kfree(power);
|
|
return ret;
|
|
}
|
|
|
|
static __devexit int wm831x_power_remove(struct platform_device *pdev)
|
|
{
|
|
struct wm831x_power *wm831x_power = platform_get_drvdata(pdev);
|
|
struct wm831x *wm831x = wm831x_power->wm831x;
|
|
int irq, i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) {
|
|
irq = wm831x_irq(wm831x,
|
|
platform_get_irq_byname(pdev,
|
|
wm831x_bat_irqs[i]));
|
|
free_irq(irq, wm831x_power);
|
|
}
|
|
|
|
irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "PWR SRC"));
|
|
free_irq(irq, wm831x_power);
|
|
|
|
irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "SYSLO"));
|
|
free_irq(irq, wm831x_power);
|
|
|
|
if (wm831x_power->have_battery)
|
|
power_supply_unregister(&wm831x_power->battery);
|
|
power_supply_unregister(&wm831x_power->wall);
|
|
power_supply_unregister(&wm831x_power->usb);
|
|
kfree(wm831x_power);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver wm831x_power_driver = {
|
|
.probe = wm831x_power_probe,
|
|
.remove = __devexit_p(wm831x_power_remove),
|
|
.driver = {
|
|
.name = "wm831x-power",
|
|
},
|
|
};
|
|
|
|
module_platform_driver(wm831x_power_driver);
|
|
|
|
MODULE_DESCRIPTION("Power supply driver for WM831x PMICs");
|
|
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:wm831x-power");
|