linux-hardened/drivers/net/wireless/b43
Rafał Miłecki e67dd874e6 b43: N-PHY: increase initial value of "mind" in RSSI calibration
We're using "mind" variable to find the VCM that got the best polling
results. For each VCM we calculte "currd" which is compared to the
"mind". For PHY rev3+ "currd" gets values around 14k-40k. Looking for a
value smaller than 40 makes no sense, so increase the initial value.

This fixes a regression introduced in 3.4 by commit:
e0c9a0219a
(my BCM4322 performance dropped from 18,4Mb/s to 9,26Mb/s)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-27 11:07:04 -04:00
..
b43.h b43: Fix firmware loading when driver is built into the kernel 2013-01-07 14:34:45 -05:00
bus.c bcma: add boardinfo struct 2012-05-16 12:45:21 -04:00
bus.h
debugfs.c simple_open: automatically convert to simple_open() 2012-04-05 15:25:50 -07:00
debugfs.h
dma.c b43: fix tx path skb leaks 2012-12-10 15:49:59 -05:00
dma.h b43: Increase number of RX DMA slots 2013-02-19 00:51:08 -05:00
Kconfig drivers/net/wireless/b43: remove depends on CONFIG_EXPERIMENTAL 2013-01-22 12:01:35 -08:00
leds.c net: fix assignment of 0/1 to bool variables. 2011-12-19 22:27:29 -05:00
leds.h
lo.c net: fix assignment of 0/1 to bool variables. 2011-12-19 22:27:29 -05:00
lo.h
main.c b43: Fix lockdep splat on module unload 2013-02-25 15:47:41 -05:00
main.h b43: Fix firmware loading when driver is built into the kernel 2013-01-07 14:34:45 -05:00
Makefile b43: N-PHY: init 0x2057 radio 2012-08-06 14:56:35 -04:00
pcmcia.c b43: remove __dev* attributes 2012-12-06 15:04:56 -05:00
pcmcia.h
phy_a.c
phy_a.h
phy_common.c b43: add helper waiting for given value in radio reg 2012-08-06 14:56:35 -04:00
phy_common.h b43: add helper waiting for given value in radio reg 2012-08-06 14:56:35 -04:00
phy_g.c net: fix assignment of 0/1 to bool variables. 2011-12-19 22:27:29 -05:00
phy_g.h
phy_ht.c
phy_ht.h
phy_lcn.c
phy_lcn.h
phy_lp.c net: fix assignment of 0/1 to bool variables. 2011-12-19 22:27:29 -05:00
phy_lp.h
phy_n.c b43: N-PHY: increase initial value of "mind" in RSSI calibration 2013-03-27 11:07:04 -04:00
phy_n.h b43: N-PHY: finish 0x2056 radio setup 2012-08-06 14:56:35 -04:00
pio.c b43: fix tx path skb leaks 2012-12-10 15:49:59 -05:00
pio.h
radio_2055.c
radio_2055.h
radio_2056.c b43: N-PHY: finish 2.4GHz 0x2056 radio setup 2011-12-13 15:33:56 -05:00
radio_2056.h b43: N-PHY: finish 2.4GHz 0x2056 radio setup 2011-12-13 15:33:56 -05:00
radio_2057.c b43: N-PHY: init 0x2057 radio 2012-08-06 14:56:35 -04:00
radio_2057.h b43: N-PHY: init 0x2057 radio 2012-08-06 14:56:35 -04:00
radio_2059.c
radio_2059.h
rfkill.c
rfkill.h
sdio.c b43: remove __dev* attributes 2012-12-06 15:04:56 -05:00
sdio.h
sysfs.c
sysfs.h
tables.c
tables.h
tables_lpphy.c
tables_lpphy.h
tables_nphy.c b43: N-PHY: fix gain in b43_nphy_get_gain_ctl_workaround_ent() 2013-01-22 16:01:29 -05:00
tables_nphy.h b43: N-PHY: add overriding RF control for rev7+ 2012-08-06 15:01:56 -04:00
tables_phy_ht.c
tables_phy_ht.h
tables_phy_lcn.c
tables_phy_lcn.h
wa.c
wa.h
xmit.c mac80211: support RX_FLAG_MACTIME_END 2012-11-13 21:43:55 +01:00
xmit.h b43: HT-PHY: report signal to mac80211 2011-11-07 13:19:12 -05:00