linux-hardened/drivers/mmc/host
Linus Torvalds ead751507d License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
 makes it harder for compliance tools to determine the correct license.
 
 By default all files without license information are under the default
 license of the kernel, which is GPL version 2.
 
 Update the files which contain no license information with the 'GPL-2.0'
 SPDX license identifier.  The SPDX identifier is a legally binding
 shorthand, which can be used instead of the full boiler plate text.
 
 This patch is based on work done by Thomas Gleixner and Kate Stewart and
 Philippe Ombredanne.
 
 How this work was done:
 
 Patches were generated and checked against linux-4.14-rc6 for a subset of
 the use cases:
  - file had no licensing information it it.
  - file was a */uapi/* one with no licensing information in it,
  - file was a */uapi/* one with existing licensing information,
 
 Further patches will be generated in subsequent months to fix up cases
 where non-standard license headers were used, and references to license
 had to be inferred by heuristics based on keywords.
 
 The analysis to determine which SPDX License Identifier to be applied to
 a file was done in a spreadsheet of side by side results from of the
 output of two independent scanners (ScanCode & Windriver) producing SPDX
 tag:value files created by Philippe Ombredanne.  Philippe prepared the
 base worksheet, and did an initial spot review of a few 1000 files.
 
 The 4.13 kernel was the starting point of the analysis with 60,537 files
 assessed.  Kate Stewart did a file by file comparison of the scanner
 results in the spreadsheet to determine which SPDX license identifier(s)
 to be applied to the file. She confirmed any determination that was not
 immediately clear with lawyers working with the Linux Foundation.
 
 Criteria used to select files for SPDX license identifier tagging was:
  - Files considered eligible had to be source code files.
  - Make and config files were included as candidates if they contained >5
    lines of source
  - File already had some variant of a license header in it (even if <5
    lines).
 
 All documentation files were explicitly excluded.
 
 The following heuristics were used to determine which SPDX license
 identifiers to apply.
 
  - when both scanners couldn't find any license traces, file was
    considered to have no license information in it, and the top level
    COPYING file license applied.
 
    For non */uapi/* files that summary was:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|-------
    GPL-2.0                                              11139
 
    and resulted in the first patch in this series.
 
    If that file was a */uapi/* path one, it was "GPL-2.0 WITH
    Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|-------
    GPL-2.0 WITH Linux-syscall-note                        930
 
    and resulted in the second patch in this series.
 
  - if a file had some form of licensing information in it, and was one
    of the */uapi/* ones, it was denoted with the Linux-syscall-note if
    any GPL family license was found in the file or had no licensing in
    it (per prior point).  Results summary:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|------
    GPL-2.0 WITH Linux-syscall-note                       270
    GPL-2.0+ WITH Linux-syscall-note                      169
    ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
    ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
    LGPL-2.1+ WITH Linux-syscall-note                      15
    GPL-1.0+ WITH Linux-syscall-note                       14
    ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
    LGPL-2.0+ WITH Linux-syscall-note                       4
    LGPL-2.1 WITH Linux-syscall-note                        3
    ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
    ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1
 
    and that resulted in the third patch in this series.
 
  - when the two scanners agreed on the detected license(s), that became
    the concluded license(s).
 
  - when there was disagreement between the two scanners (one detected a
    license but the other didn't, or they both detected different
    licenses) a manual inspection of the file occurred.
 
  - In most cases a manual inspection of the information in the file
    resulted in a clear resolution of the license that should apply (and
    which scanner probably needed to revisit its heuristics).
 
  - When it was not immediately clear, the license identifier was
    confirmed with lawyers working with the Linux Foundation.
 
  - If there was any question as to the appropriate license identifier,
    the file was flagged for further research and to be revisited later
    in time.
 
 In total, over 70 hours of logged manual review was done on the
 spreadsheet to determine the SPDX license identifiers to apply to the
 source files by Kate, Philippe, Thomas and, in some cases, confirmation
 by lawyers working with the Linux Foundation.
 
 Kate also obtained a third independent scan of the 4.13 code base from
 FOSSology, and compared selected files where the other two scanners
 disagreed against that SPDX file, to see if there was new insights.  The
 Windriver scanner is based on an older version of FOSSology in part, so
 they are related.
 
 Thomas did random spot checks in about 500 files from the spreadsheets
 for the uapi headers and agreed with SPDX license identifier in the
 files he inspected. For the non-uapi files Thomas did random spot checks
 in about 15000 files.
 
 In initial set of patches against 4.14-rc6, 3 files were found to have
 copy/paste license identifier errors, and have been fixed to reflect the
 correct identifier.
 
 Additionally Philippe spent 10 hours this week doing a detailed manual
 inspection and review of the 12,461 patched files from the initial patch
 version early this week with:
  - a full scancode scan run, collecting the matched texts, detected
    license ids and scores
  - reviewing anything where there was a license detected (about 500+
    files) to ensure that the applied SPDX license was correct
  - reviewing anything where there was no detection but the patch license
    was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
    SPDX license was correct
 
 This produced a worksheet with 20 files needing minor correction.  This
 worksheet was then exported into 3 different .csv files for the
 different types of files to be modified.
 
 These .csv files were then reviewed by Greg.  Thomas wrote a script to
 parse the csv files and add the proper SPDX tag to the file, in the
 format that the file expected.  This script was further refined by Greg
 based on the output to detect more types of files automatically and to
 distinguish between header and source .c files (which need different
 comment types.)  Finally Greg ran the script using the .csv files to
 generate the patches.
 
 Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
 Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
 Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWfswbQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykvEwCfXU1MuYFQGgMdDmAZXEc+xFXZvqgAoKEcHDNA
 6dVh26uchcEQLN/XqUDt
 =x306
 -----END PGP SIGNATURE-----

Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull initial SPDX identifiers from Greg KH:
 "License cleanup: add SPDX license identifiers to some files

  Many source files in the tree are missing licensing information, which
  makes it harder for compliance tools to determine the correct license.

  By default all files without license information are under the default
  license of the kernel, which is GPL version 2.

  Update the files which contain no license information with the
  'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
  binding shorthand, which can be used instead of the full boiler plate
  text.

  This patch is based on work done by Thomas Gleixner and Kate Stewart
  and Philippe Ombredanne.

  How this work was done:

  Patches were generated and checked against linux-4.14-rc6 for a subset
  of the use cases:

   - file had no licensing information it it.

   - file was a */uapi/* one with no licensing information in it,

   - file was a */uapi/* one with existing licensing information,

  Further patches will be generated in subsequent months to fix up cases
  where non-standard license headers were used, and references to
  license had to be inferred by heuristics based on keywords.

  The analysis to determine which SPDX License Identifier to be applied
  to a file was done in a spreadsheet of side by side results from of
  the output of two independent scanners (ScanCode & Windriver)
  producing SPDX tag:value files created by Philippe Ombredanne.
  Philippe prepared the base worksheet, and did an initial spot review
  of a few 1000 files.

  The 4.13 kernel was the starting point of the analysis with 60,537
  files assessed. Kate Stewart did a file by file comparison of the
  scanner results in the spreadsheet to determine which SPDX license
  identifier(s) to be applied to the file. She confirmed any
  determination that was not immediately clear with lawyers working with
  the Linux Foundation.

  Criteria used to select files for SPDX license identifier tagging was:

   - Files considered eligible had to be source code files.

   - Make and config files were included as candidates if they contained
     >5 lines of source

   - File already had some variant of a license header in it (even if <5
     lines).

  All documentation files were explicitly excluded.

  The following heuristics were used to determine which SPDX license
  identifiers to apply.

   - when both scanners couldn't find any license traces, file was
     considered to have no license information in it, and the top level
     COPYING file license applied.

     For non */uapi/* files that summary was:

       SPDX license identifier                            # files
       ---------------------------------------------------|-------
       GPL-2.0                                              11139

     and resulted in the first patch in this series.

     If that file was a */uapi/* path one, it was "GPL-2.0 WITH
     Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
     was:

       SPDX license identifier                            # files
       ---------------------------------------------------|-------
       GPL-2.0 WITH Linux-syscall-note                        930

     and resulted in the second patch in this series.

   - if a file had some form of licensing information in it, and was one
     of the */uapi/* ones, it was denoted with the Linux-syscall-note if
     any GPL family license was found in the file or had no licensing in
     it (per prior point). Results summary:

       SPDX license identifier                            # files
       ---------------------------------------------------|------
       GPL-2.0 WITH Linux-syscall-note                       270
       GPL-2.0+ WITH Linux-syscall-note                      169
       ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
       ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
       LGPL-2.1+ WITH Linux-syscall-note                      15
       GPL-1.0+ WITH Linux-syscall-note                       14
       ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
       LGPL-2.0+ WITH Linux-syscall-note                       4
       LGPL-2.1 WITH Linux-syscall-note                        3
       ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
       ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

     and that resulted in the third patch in this series.

   - when the two scanners agreed on the detected license(s), that
     became the concluded license(s).

   - when there was disagreement between the two scanners (one detected
     a license but the other didn't, or they both detected different
     licenses) a manual inspection of the file occurred.

   - In most cases a manual inspection of the information in the file
     resulted in a clear resolution of the license that should apply
     (and which scanner probably needed to revisit its heuristics).

   - When it was not immediately clear, the license identifier was
     confirmed with lawyers working with the Linux Foundation.

   - If there was any question as to the appropriate license identifier,
     the file was flagged for further research and to be revisited later
     in time.

  In total, over 70 hours of logged manual review was done on the
  spreadsheet to determine the SPDX license identifiers to apply to the
  source files by Kate, Philippe, Thomas and, in some cases,
  confirmation by lawyers working with the Linux Foundation.

  Kate also obtained a third independent scan of the 4.13 code base from
  FOSSology, and compared selected files where the other two scanners
  disagreed against that SPDX file, to see if there was new insights.
  The Windriver scanner is based on an older version of FOSSology in
  part, so they are related.

  Thomas did random spot checks in about 500 files from the spreadsheets
  for the uapi headers and agreed with SPDX license identifier in the
  files he inspected. For the non-uapi files Thomas did random spot
  checks in about 15000 files.

  In initial set of patches against 4.14-rc6, 3 files were found to have
  copy/paste license identifier errors, and have been fixed to reflect
  the correct identifier.

  Additionally Philippe spent 10 hours this week doing a detailed manual
  inspection and review of the 12,461 patched files from the initial
  patch version early this week with:

   - a full scancode scan run, collecting the matched texts, detected
     license ids and scores

   - reviewing anything where there was a license detected (about 500+
     files) to ensure that the applied SPDX license was correct

   - reviewing anything where there was no detection but the patch
     license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
     applied SPDX license was correct

  This produced a worksheet with 20 files needing minor correction. This
  worksheet was then exported into 3 different .csv files for the
  different types of files to be modified.

  These .csv files were then reviewed by Greg. Thomas wrote a script to
  parse the csv files and add the proper SPDX tag to the file, in the
  format that the file expected. This script was further refined by Greg
  based on the output to detect more types of files automatically and to
  distinguish between header and source .c files (which need different
  comment types.) Finally Greg ran the script using the .csv files to
  generate the patches.

  Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
  Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
  Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  License cleanup: add SPDX license identifier to uapi header files with a license
  License cleanup: add SPDX license identifier to uapi header files with no license
  License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 10:04:46 -07:00
..
android-goldfish.c mmc: android-goldfish: remove logically dead code in goldfish_mmc_irq() 2017-08-30 14:01:23 +02:00
atmel-mci.c mmc: Convert to using %pOF instead of full_name 2017-08-30 14:01:36 +02:00
au1xmmc.c
bcm2835.c mmc: bcm2835: constify mmc_host_ops structures 2017-08-30 14:01:45 +02:00
bfin_sdh.c mmc: bfin_sdh: remove the MMC_DATA_STREAM flag 2016-02-29 11:02:59 +01:00
cavium-octeon.c mmc: cavium-octeon: Convert to use module_platform_driver 2017-08-30 15:03:38 +02:00
cavium-thunderx.c mmc: cavium: Fix use-after-free in of_platform_device_destroy 2017-09-08 15:38:22 +02:00
cavium.c mmc: Delete bounce buffer handling 2017-10-04 10:22:55 +02:00
cavium.h mmc: cavium: Add scatter-gather DMA support 2017-04-24 21:42:10 +02:00
cb710-mmc.c
cb710-mmc.h mmc: cb710: use to_platform_device() 2016-01-05 18:04:57 +01:00
davinci_mmc.c mmc: davinci: constify mmc_host_ops structures 2017-08-30 14:01:41 +02:00
dw_mmc-exynos.c mmc: dw_mmc: use the 'slot' instead of 'cur_slot' 2017-06-29 17:14:26 +02:00
dw_mmc-exynos.h
dw_mmc-k3.c mmc: dw_mmc-k3: add sd support for hi3660 2017-08-30 14:01:56 +02:00
dw_mmc-pci.c mmc: dw_mmc: Remove the public dw_mmc header file 2017-02-13 13:19:59 +01:00
dw_mmc-pltfm.c mmc: dw_mmc: Remove the public dw_mmc header file 2017-02-13 13:19:59 +01:00
dw_mmc-pltfm.h
dw_mmc-rockchip.c mmc: dw_mmc-rockchip: parse rockchip, desired-num-phases from DT 2017-06-29 17:13:59 +02:00
dw_mmc-zx.c mmc: dw_mmc: zx: Initial support for ZX mmc controller 2017-02-13 13:20:03 +01:00
dw_mmc-zx.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
dw_mmc.c mmc: dw_mmc: introduce timer for broken command transfer over scheme 2017-08-30 14:01:57 +02:00
dw_mmc.h mmc: dw_mmc: introduce timer for broken command transfer over scheme 2017-08-30 14:01:57 +02:00
jz4740_mmc.c mmc: jz4740: Let the pinctrl driver configure the pins 2017-05-22 17:20:02 +02:00
Kconfig mmc: host: fix typo after MMC_DEBUG move 2017-09-08 15:38:21 +02:00
Makefile License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
meson-gx-mmc.c mmc: meson-gx: include tx phase in the tuning process 2017-10-04 10:42:11 +02:00
mmc_spi.c mmc: use new core function mmc_get_dma_dir 2017-04-24 21:41:52 +02:00
mmci.c mmc: mmci: constify amba_id 2017-08-30 15:03:46 +02:00
mmci.h mmc: core/mmci: restore pre/post_req behaviour 2017-02-13 13:20:52 +01:00
mmci_qcom_dml.c scripts/spelling.txt: add "intialization" pattern and fix typo instances 2017-02-27 18:43:47 -08:00
mmci_qcom_dml.h
moxart-mmc.c mmc: moxart: constify mmc_host_ops structures 2017-08-30 14:01:41 +02:00
mtk-sd.c mmc: mediatek: constify mmc_host_ops structures 2017-08-30 14:01:44 +02:00
mvsdio.c mmc: use new core function mmc_get_dma_dir 2017-04-24 21:41:52 +02:00
mvsdio.h
mxcmmc.c mmc: mxcmmc: Handle return value of clk_prepare_enable 2017-08-30 14:01:55 +02:00
mxs-mmc.c mmc: mxs-mmc: Implement CMD23 support 2017-02-13 13:20:27 +01:00
of_mmc_spi.c mmc: of_mmc_spi: fix restricted cast warning of sparse 2017-08-30 14:01:45 +02:00
omap.c mmc: omap: Don't use mmc_card_present() when validating for inserted card 2017-02-13 13:20:23 +01:00
omap_hsmmc.c mmc: omap_hsmmc: Reduce max_segs for reliability 2017-08-30 14:01:22 +02:00
pxamci.c mmc: Delete bounce buffer handling 2017-10-04 10:22:55 +02:00
pxamci.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
renesas_sdhi.h mmc: tmio, renesas-sdhi: add max_{segs, blk_count} to tmio_mmc_data 2017-08-30 14:01:21 +02:00
renesas_sdhi_core.c mmc: sdhi: use maximum width for the sdbuf register 2017-08-30 14:01:59 +02:00
renesas_sdhi_internal_dmac.c mmc: renesas_sdhi: fix kernel panic in _internal_dmac.c 2017-10-20 11:24:58 +02:00
renesas_sdhi_sys_dmac.c mmc: renesas_sdhi: Add r8a7743/5 support 2017-09-01 15:31:01 +02:00
rtsx_pci_sdmmc.c mmc: use empty initializer list to zero-clear structures 2017-02-13 13:19:54 +01:00
rtsx_usb_sdmmc.c mmc: rtsx_usb_sdmmc: make array 'width' static const 2017-08-30 14:01:27 +02:00
s3cmci.c mmc: s3cmci: constify mmc_host_ops structures 2017-08-30 14:01:40 +02:00
s3cmci.h mmc: s3cmci: Register cpufreq notifier only on S3C24xx 2016-07-25 10:34:46 +02:00
sdhci-acpi.c sdhci: acpi: Use new method to get ACPI companion 2017-08-30 14:01:39 +02:00
sdhci-bcm-kona.c mmc: sdhci-bcm-kona: constify sdhci_pltfm_data and sdhci_ops structures 2017-08-30 14:01:52 +02:00
sdhci-brcmstb.c mmc: sdhci: enable/disable the clock in sdhci_pltfm_suspend/resume 2017-08-30 15:03:44 +02:00
sdhci-cadence.c mmc: sdhci-pltfm: export sdhci_pltfm_suspend/resume 2017-08-30 15:03:45 +02:00
sdhci-cns3xxx.c mmc: sdhci-pltfm: Drop define for SDHCI_PLTFM_PMOPS 2016-07-29 11:29:04 +02:00
sdhci-dove.c mmc: sdhci-pltfm: Drop define for SDHCI_PLTFM_PMOPS 2016-07-29 11:29:04 +02:00
sdhci-esdhc-imx.c mmc: sdhci-esdhc-imx: Remove the ENGcm07207 workaround 2017-06-20 10:30:34 +02:00
sdhci-esdhc.h mmc: sdhci-of-esdhc: support ESDHC_CAPABILITIES_1 accessing 2017-08-30 15:03:36 +02:00
sdhci-iproc.c mmc: sdhci-iproc: suppress spurious interrupt with Multiblock read 2017-05-22 18:18:04 +02:00
sdhci-msm.c mmc: sdhci-msm: set sdma_boundary to zero 2017-08-30 14:01:54 +02:00
sdhci-of-arasan.c mmc: sdhci-of-arasan: constify sdhci_pltfm_data and sdhci_ops structures 2017-08-30 14:01:53 +02:00
sdhci-of-at91.c mmc: sdhci-of-at91: set clocks and presets after resume from deepest PM 2017-08-30 14:01:31 +02:00
sdhci-of-esdhc.c mmc: sdhci-of-esdhc: support ESDHC_CAPABILITIES_1 accessing 2017-08-30 15:03:36 +02:00
sdhci-of-hlwd.c mmc: sdhci-pltfm: Drop define for SDHCI_PLTFM_PMOPS 2016-07-29 11:29:04 +02:00
sdhci-pci-core.c mmc: sdhci-pci: Fix default d3_retune for Intel host controllers 2017-10-10 08:40:04 +02:00
sdhci-pci-data.c mmc: sdhci-pci: Use ACPI DSM to get driver strength for some Intel devices 2017-04-24 21:41:28 +02:00
sdhci-pci-o2micro.c mmc: sdhci-pci: Let suspend/resume callbacks replace default callbacks 2017-04-24 21:41:38 +02:00
sdhci-pci-o2micro.h mmc: sdhci-pci: Make sdhci_pci_o2_fujin2_pci_init() static 2015-10-26 16:00:05 +01:00
sdhci-pci.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
sdhci-pic32.c mmc: sdhci: constify sdhci_pltfm_data structures 2017-08-30 14:01:51 +02:00
sdhci-pltfm.c mmc: sdhci-pltfm: export sdhci_pltfm_suspend/resume 2017-08-30 15:03:45 +02:00
sdhci-pltfm.h mmc: sdhci-pltfm: export sdhci_pltfm_suspend/resume 2017-08-30 15:03:45 +02:00
sdhci-pxav2.c mmc: sdhci-pxav2: switch to managed clk and sdhci_pltfm_unregister() 2017-08-30 15:03:44 +02:00
sdhci-pxav3.c mmc: sdhci: constify sdhci_pltfm_data structures 2017-08-30 14:01:51 +02:00
sdhci-s3c.c mmc: sdhci-s3c: use generic sdhci_set_bus_width() 2017-08-30 15:03:35 +02:00
sdhci-sirf.c mmc: sdhci: enable/disable the clock in sdhci_pltfm_suspend/resume 2017-08-30 15:03:44 +02:00
sdhci-spear.c mmc: sdhci: Let drivers decide whether to use mmc_retune_needed() with pm 2017-04-24 21:41:26 +02:00
sdhci-st.c mmc: sdhci-st: explicitly request exclusive reset control 2017-08-30 14:01:37 +02:00
sdhci-tegra.c mmc: sdhci-tegra: use generic sdhci_set_bus_width() 2017-08-30 15:03:35 +02:00
sdhci-xenon-phy.c mmc: sdhci-xenon: Support HS400 Enhanced Strobe feature 2017-08-30 15:03:43 +02:00
sdhci-xenon.c mmc: sdhci-xenon: Fix clock resource by adding an optional bus clock 2017-10-04 10:50:36 +02:00
sdhci-xenon.h mmc: sdhci-xenon: Fix clock resource by adding an optional bus clock 2017-10-04 10:50:36 +02:00
sdhci.c mmc: sdhci: Add quirk to indicate MMC_RSP_136 has CRC 2017-08-30 15:03:43 +02:00
sdhci.h mmc: sdhci: Add quirk to indicate MMC_RSP_136 has CRC 2017-08-30 15:03:43 +02:00
sdhci_f_sdh30.c mmc: sdhci-pltfm: Drop define for SDHCI_PLTFM_PMOPS 2016-07-29 11:29:04 +02:00
sdricoh_cs.c mmc: sdricoh_cs: constify mmc_host_ops structures 2017-08-30 14:01:44 +02:00
sh_mmcif.c mmc: sh_mmcif: constify mmc_host_ops structures 2017-08-30 14:01:42 +02:00
sunxi-mmc.c mmc: sunxi: Reset the device at probe time 2017-08-30 15:03:52 +02:00
tifm_sd.c
tmio_mmc.c mmc: tmio: improve checkpatch cleanness 2017-06-20 10:30:50 +02:00
tmio_mmc.h mmc: tmio: no magic values when enabling DMA 2017-08-30 14:01:25 +02:00
tmio_mmc_core.c mmc: tmio: fix swiotlb buffer is full 2017-10-20 11:24:58 +02:00
toshsd.c mmc: toshsd: constify mmc_host_ops structures 2017-08-30 14:01:42 +02:00
toshsd.h
usdhi6rol0.c mmc: usdhi6rol0: constify mmc_host_ops structures 2017-08-30 14:01:43 +02:00
ushc.c mmc: ushc: fix NULL-deref at probe 2017-03-16 15:31:27 +01:00
via-sdmmc.c mmc: host: via-sdmmc: constify pci_device_id. 2017-08-30 14:01:35 +02:00
vub300.c mmc: vub300: constify usb_device_id 2017-08-30 14:01:58 +02:00
wbsd.c mmc: wbsd: remove CONFIG_MMC_DEBUG from the driver 2017-08-30 14:01:35 +02:00
wbsd.h
wmt-sdmmc.c mmc: wmt-sdmmc: Handle return value of clk_prepare_enable 2017-08-30 14:01:55 +02:00