kpriv/pkgsrc
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
pkgsrc/audio/nas/Makefile

72 lines
1.8 KiB
Makefile
Raw Normal View History

Remove USE_GNU_TOOLS and replace with the correct USE_TOOLS definitions: USE_GNU_TOOLS -> USE_TOOLS awk -> gawk m4 -> gm4 make -> gmake sed -> gsed yacc -> bison
2005-05-22 22:07:36 +02:00
# $NetBSD: Makefile,v 1.54 2005/05/22 20:07:39 jlam Exp $
Add back nas package version 1.2.5, the client/server network audio system. Originally from FreeBSD, but much modified by Jaromir Dolocek, and finally munged around by agc to get the man pages correct in the Makefile.
1998-05-18 11:18:28 +02:00
Changes 1.7: - fixed config/Imakefile so 'configure' command would work under cygwin. Tested clients/server under cygwin. - corrected a possible race condition in auvoxware that could cause the server to hang under certain conditions. I do not know why I haven't seen this problem before, but I could recreate it easily by killing auplay while playing a long tune. If the system restarts syscalls after a signal handler has run, a situation could arise where the previous timer was never disabled. This could cause a previous ioctl(DSP_SYNC) called from setSampleRate() to be constantly interrupted and restarted, causing an apparent hang. Now we just turn off the timer as the first thing in setSampleRate() so DSP_SYNC can actually finish. We also turn off the timer when openDevice is called, so the 'wait for device to become available' code can work too. - Patch from Tobias Diedrich that allows mixer init to fail in the voxware server. - redid the FAQ in an attempt to make it more useful. I'll try to keep it up to date. - updated libtool due to a problem(s) reported by Steve McIntyre.
2004-11-23 09:50:23 +01:00
DISTNAME= nas-1.7.src
Update nas from 1.2.5 to 1.4. Relevant changes from version 1.2.5: - corrected a problem in the voxware server where when ReleaseDevice was enabled, the device would be held open when nasd was first started until the first connection was made. - changed documentation regarding the new location of the web site (http://radscan.com/nas.html) - integrated config handling in all servers, based on a lex/yacc parser from Stephen Hocking that was in the voxware server. - config file is /etc/nas/nasd.conf an example config file is installed. - parser errors are a bit more informative ;-) - each server now has a config.c and config.h file that provides the ddaSetConfig() functionality required of each server by dia/. In the SGI case, it's just a stub. ddaSetConfig() ignores options it doesn't understand (required behavior). - server cmdline options '-v' (verbose) and '-d <num>' (debug messages) added. These override nasd.conf settings. - hooks added to all servers in config.c - ddaProcessArg() and ddaUseMsg() for integrated arg handling. - voxware server: - release device functionality now controlled by nasd.conf - mixer init policy now controlled by nasd.conf - sun server: - added integrated sun (ausuni) module (now built by default) into the distribution. - release device functionality now controlled by nasd.conf - hpux server: - added device release (ReleaseDevice) capability to hpux server. All servers except for sgi now support this functionality. - fixed sample rate change problem in hpux server - separated hardware init code for ReleaseDevice functionality - added new option in nasd.conf to select either the EXT (external - headphones/speakers) or INT (internal speaker) output device by default - renamed generated server binary from au* to nasd for all servers - man pages updated (auserver.man and AUVoxConfig.man respectively). - Added patches from Mark Davies for NetBSD.
2000-08-04 03:31:55 +02:00
PKGNAME= ${DISTNAME:S/.src//}
Define BSD44SOCKETS when building libaudio on NetBSD. From PR pkg/20615 by Scott Presnell. Scott's patch was added to nas before 1.7 but then broken, this fixes that. Bump PKGREVISION.
2005-04-07 16:33:56 +02:00
PKGREVISION= 1
Add back nas package version 1.2.5, the client/server network audio system. Originally from FreeBSD, but much modified by Jaromir Dolocek, and finally munged around by agc to get the man pages correct in the Makefile.
1998-05-18 11:18:28 +02:00
CATEGORIES= audio
Update MASTER_SITES.
2004-10-28 15:38:52 +02:00
MASTER_SITES= http://nas.codebrilliance.com/nas/ \
Changes 1.7: - fixed config/Imakefile so 'configure' command would work under cygwin. Tested clients/server under cygwin. - corrected a possible race condition in auvoxware that could cause the server to hang under certain conditions. I do not know why I haven't seen this problem before, but I could recreate it easily by killing auplay while playing a long tune. If the system restarts syscalls after a signal handler has run, a situation could arise where the previous timer was never disabled. This could cause a previous ioctl(DSP_SYNC) called from setSampleRate() to be constantly interrupted and restarted, causing an apparent hang. Now we just turn off the timer as the first thing in setSampleRate() so DSP_SYNC can actually finish. We also turn off the timer when openDevice is called, so the 'wait for device to become available' code can work too. - Patch from Tobias Diedrich that allows mixer init to fail in the voxware server. - redid the FAQ in an attempt to make it more useful. I'll try to keep it up to date. - updated libtool due to a problem(s) reported by Steve McIntyre.
2004-11-23 09:50:23 +01:00
ftp://ftp.uni-duisburg.de/Sound/NAS/
Add back nas package version 1.2.5, the client/server network audio system. Originally from FreeBSD, but much modified by Jaromir Dolocek, and finally munged around by agc to get the man pages correct in the Makefile.
1998-05-18 11:18:28 +02:00
Take maintainership.
2005-04-07 14:38:02 +02:00
MAINTAINER= markd@NetBSD.org
Update nas from 1.2.5 to 1.4. Relevant changes from version 1.2.5: - corrected a problem in the voxware server where when ReleaseDevice was enabled, the device would be held open when nasd was first started until the first connection was made. - changed documentation regarding the new location of the web site (http://radscan.com/nas.html) - integrated config handling in all servers, based on a lex/yacc parser from Stephen Hocking that was in the voxware server. - config file is /etc/nas/nasd.conf an example config file is installed. - parser errors are a bit more informative ;-) - each server now has a config.c and config.h file that provides the ddaSetConfig() functionality required of each server by dia/. In the SGI case, it's just a stub. ddaSetConfig() ignores options it doesn't understand (required behavior). - server cmdline options '-v' (verbose) and '-d <num>' (debug messages) added. These override nasd.conf settings. - hooks added to all servers in config.c - ddaProcessArg() and ddaUseMsg() for integrated arg handling. - voxware server: - release device functionality now controlled by nasd.conf - mixer init policy now controlled by nasd.conf - sun server: - added integrated sun (ausuni) module (now built by default) into the distribution. - release device functionality now controlled by nasd.conf - hpux server: - added device release (ReleaseDevice) capability to hpux server. All servers except for sgi now support this functionality. - fixed sample rate change problem in hpux server - separated hardware init code for ReleaseDevice functionality - added new option in nasd.conf to select either the EXT (external - headphones/speakers) or INT (internal speaker) output device by default - renamed generated server binary from au* to nasd for all servers - man pages updated (auserver.man and AUVoxConfig.man respectively). - Added patches from Mark Davies for NetBSD.
2000-08-04 03:31:55 +02:00
HOMEPAGE= http://radscan.com/nas.html
Update to new COMMENT style: COMMENT var in Makefile instead of pkg/COMMENT.
2001-02-16 14:30:32 +01:00
COMMENT= Network Audio System
portlint: add default MAINTAINER, remove USE_X11.
1998-05-21 22:23:51 +02:00
Generalize the dependency on p5-perl-headers to take account of all "nb" bumps, as suggested by Juergen Hannken-Illjes (PR pkg/28754).
2004-12-29 18:12:13 +01:00
DEPENDS+= p5-perl-headers-${OS_VERSION}{,nb*}:../../devel/p5-perl-headers
Added missing p5-perl-headers dependency required by nas perl scripts
2003-07-29 14:59:08 +02:00
Enable pkgviews installation.
2004-04-18 00:48:06 +02:00
PKG_INSTALLATION_TYPES= overwrite pkgviews
Changes 1.7: - fixed config/Imakefile so 'configure' command would work under cygwin. Tested clients/server under cygwin. - corrected a possible race condition in auvoxware that could cause the server to hang under certain conditions. I do not know why I haven't seen this problem before, but I could recreate it easily by killing auplay while playing a long tune. If the system restarts syscalls after a signal handler has run, a situation could arise where the previous timer was never disabled. This could cause a previous ioctl(DSP_SYNC) called from setSampleRate() to be constantly interrupted and restarted, causing an apparent hang. Now we just turn off the timer as the first thing in setSampleRate() so DSP_SYNC can actually finish. We also turn off the timer when openDevice is called, so the 'wait for device to become available' code can work too. - Patch from Tobias Diedrich that allows mixer init to fail in the voxware server. - redid the FAQ in an attempt to make it more useful. I'll try to keep it up to date. - updated libtool due to a problem(s) reported by Steve McIntyre.
2004-11-23 09:50:23 +01:00
WRKSRC= ${WRKDIR}/${PKGNAME_NOREV}
Remove USE_GNU_TOOLS and replace with the correct USE_TOOLS definitions: USE_GNU_TOOLS -> USE_TOOLS awk -> gawk m4 -> gm4 make -> gmake sed -> gsed yacc -> bison
2005-05-22 22:07:36 +02:00
USE_TOOLS+= gmake
Instead of including bsd.pkg.install.mk directly in a package Makefile, have it be automatically included by bsd.pkg.mk if USE_PKGINSTALL is set to "YES". This enforces the requirement that bsd.pkg.install.mk be included at the end of a package Makefile. Idea suggested by Julio M. Merino Vidal <jmmv at menta.net>.
2003-01-28 23:03:00 +01:00
USE_PKGINSTALL= yes
USE_IMAKE= yes
Update nas from 1.2.5 to 1.4. Relevant changes from version 1.2.5: - corrected a problem in the voxware server where when ReleaseDevice was enabled, the device would be held open when nasd was first started until the first connection was made. - changed documentation regarding the new location of the web site (http://radscan.com/nas.html) - integrated config handling in all servers, based on a lex/yacc parser from Stephen Hocking that was in the voxware server. - config file is /etc/nas/nasd.conf an example config file is installed. - parser errors are a bit more informative ;-) - each server now has a config.c and config.h file that provides the ddaSetConfig() functionality required of each server by dia/. In the SGI case, it's just a stub. ddaSetConfig() ignores options it doesn't understand (required behavior). - server cmdline options '-v' (verbose) and '-d <num>' (debug messages) added. These override nasd.conf settings. - hooks added to all servers in config.c - ddaProcessArg() and ddaUseMsg() for integrated arg handling. - voxware server: - release device functionality now controlled by nasd.conf - mixer init policy now controlled by nasd.conf - sun server: - added integrated sun (ausuni) module (now built by default) into the distribution. - release device functionality now controlled by nasd.conf - hpux server: - added device release (ReleaseDevice) capability to hpux server. All servers except for sgi now support this functionality. - fixed sample rate change problem in hpux server - separated hardware init code for ReleaseDevice functionality - added new option in nasd.conf to select either the EXT (external - headphones/speakers) or INT (internal speaker) output device by default - renamed generated server binary from au* to nasd for all servers - man pages updated (auserver.man and AUVoxConfig.man respectively). - Added patches from Mark Davies for NetBSD.
2000-08-04 03:31:55 +02:00
Update of nas to 1.6. pkgsrc changes: PKG_SYSCONFised. changes: bug fixes and ... 1.5h 10/12/2002 - Added SoundFileGetProc() to get access to the toSound and fromSound Procs in _SoundFileInfo[]. Needed for xemacs. - Added AudioLibraryVersionMajor, AudioLibraryVersionMinor, and AudioLibraryVersionTeeny to audiolib.h. Somewhat more informative than just the old AudioLibraryVersion which was set a '2'. The older AudioLibraryVersion define is still there however. 1.5g 10/7/2002 - changed inputsection defaults in nasd.conf.eg to 44.1Khz, 2 channel 16b sound. outputsection also defaults to 44.1Khz now, instead of 33Khz. - began some CC ANSI'fication of libaudio. 1.5f 8/26/2002 7/20/2002 - added cygwinArchitecture to the server Imakefile so auvoxware will be built on cygwin systems. - Removed the SoundFileInfo[] array in sound.h so cygwin would be happy. Apps should not have been accessing that array directly anyways. Added the following new functions to sound.c (that used to be macros in sound.h): SoundFileFormatString, SoundValidDataFormat, SoundFileFormatToString, SoundFileFormatToAbbrev, SoundFileFormatToSuffixes Assuming your code did not attempt to directly access SoundFileInfo[], no changes should be required. libaudio.so revision bumped to 2.3 - re-added back the Xtutils stuff, as some of the demos did in fact require it. cygwin has a problem with implicitly defined functions anyway. 7/9/2002 - rename dia/nasconfig.* to dia/nasconf.* to avoid name collision with NasConfig.h on windows systems. 1.5e 7/7/2002 - added patch from Nicolas Escuder that adds support for Windows operating systems using Cygwin. Even the NAS server is now supported. There are still issues with building regarding Imake, but once I can get more information, I'll fix those up. Read the README.CYGWIN file in the nas/ directory for instructions. I will provide a link on the nas-links page to precompiled windows binaries for libaudio.dll, nasd, and some clients - provided by Nicolas. - based on idea from Nicolas, added background (-b) mode to nasd, to force it to run in the background. Actually, he supplied a patch, but I just redid it to work properly with unix systems. - added NAS_AUDIOMSGFILE in config/NasConfig.h to specify where audio messages are stored (ADMPATH in os/osinit.c). 1.5d 6/1/2002 - added .ps -> .pdf conversions in doc/pdf/ - added html versions of man pages in doc/html/ 1.5c 3/27/2002 - removed Xtutil[hc] from libaudio and removed references to Xtutil.h in the clients. Suggestion by Paul Fox. 1.5b 3/16/2002 - added patch from Marco Molteni to add a '-local' option to nasd. Specifying this option allows only local clients to connect. - moved allow_any_host into the NasConfig struct. Along with the new '-local' option. 1.5a 2/23/2002 - more STARTSERVER fixes - there was still one case where when STARTSERVER was defined, nasd could be called with the wrong display number due to a bug in _AuConnectServer. - changed LEX/YACC DEBUG token to CDEBUG to avoid conflicts when building nas with '-DDEBUG' - DEFAULT_AUSERVER is now ":0" rather than "tcp/localhost:8000". A local socket connection will startup faster than a tcp connection. - mutex.h - corrected unixware 7.x build problem (XMUTEX_INITIALIZER) in mutex.h - added same check for sun/solaris boxes - got rid of XUSE_MTSAFE_API - now controlled by NAS_USEMTSAFEAPI defined in config/NasConfig.h If you think you are having mutex problems, you can edit config/NasConfig.h and '#undef' NAS_USEMTSAFEAPI, then rebuild everthing. This will turn off threadsafety in libaudio. - added new option, 'gain', to config file in the input/output sections. This sets the default gains when nasd starts up (if MixerInit is enabled). Only in voxware for now.
2002-11-28 12:40:45 +01:00
PKG_SYSCONFSUBDIR= nas
Added auscope perl script to REPLACE_PERL to fix broken path to perl
2003-07-13 12:32:01 +02:00
REPLACE_PERL= clients/audio/auscope/auscope
replace <malloc.h> with <stdlib.h>, allowing this to build on systems without <malloc.h>.
2003-10-26 02:02:05 +02:00
post-patch:
Use $FIND with "-print". Noted by Georg Schwarz in PR pkg/24248
2004-01-27 01:53:10 +01:00
@for f in `${FIND} ${WRKSRC} -name '*.[ch]' -print`; do \
replace <malloc.h> with <stdlib.h>, allowing this to build on systems without <malloc.h>.
2003-10-26 02:02:05 +02:00
${SED} -e "s|<malloc.h>|<stdlib.h>|g" $$f > $$f.patch \
&& ${MV} $$f.patch $$f; \
done
Make this packages OSS-aware.
2002-10-18 16:02:12 +02:00
pre-configure:
Fix the script which munges man pages to work with Solaris' xpg4 sed, which bails out if there is whitespace before a comment.
2003-12-18 20:09:31 +01:00
@cd ${WRKSRC}; for file in \
Update of nas to 1.6. pkgsrc changes: PKG_SYSCONFised. changes: bug fixes and ... 1.5h 10/12/2002 - Added SoundFileGetProc() to get access to the toSound and fromSound Procs in _SoundFileInfo[]. Needed for xemacs. - Added AudioLibraryVersionMajor, AudioLibraryVersionMinor, and AudioLibraryVersionTeeny to audiolib.h. Somewhat more informative than just the old AudioLibraryVersion which was set a '2'. The older AudioLibraryVersion define is still there however. 1.5g 10/7/2002 - changed inputsection defaults in nasd.conf.eg to 44.1Khz, 2 channel 16b sound. outputsection also defaults to 44.1Khz now, instead of 33Khz. - began some CC ANSI'fication of libaudio. 1.5f 8/26/2002 7/20/2002 - added cygwinArchitecture to the server Imakefile so auvoxware will be built on cygwin systems. - Removed the SoundFileInfo[] array in sound.h so cygwin would be happy. Apps should not have been accessing that array directly anyways. Added the following new functions to sound.c (that used to be macros in sound.h): SoundFileFormatString, SoundValidDataFormat, SoundFileFormatToString, SoundFileFormatToAbbrev, SoundFileFormatToSuffixes Assuming your code did not attempt to directly access SoundFileInfo[], no changes should be required. libaudio.so revision bumped to 2.3 - re-added back the Xtutils stuff, as some of the demos did in fact require it. cygwin has a problem with implicitly defined functions anyway. 7/9/2002 - rename dia/nasconfig.* to dia/nasconf.* to avoid name collision with NasConfig.h on windows systems. 1.5e 7/7/2002 - added patch from Nicolas Escuder that adds support for Windows operating systems using Cygwin. Even the NAS server is now supported. There are still issues with building regarding Imake, but once I can get more information, I'll fix those up. Read the README.CYGWIN file in the nas/ directory for instructions. I will provide a link on the nas-links page to precompiled windows binaries for libaudio.dll, nasd, and some clients - provided by Nicolas. - based on idea from Nicolas, added background (-b) mode to nasd, to force it to run in the background. Actually, he supplied a patch, but I just redid it to work properly with unix systems. - added NAS_AUDIOMSGFILE in config/NasConfig.h to specify where audio messages are stored (ADMPATH in os/osinit.c). 1.5d 6/1/2002 - added .ps -> .pdf conversions in doc/pdf/ - added html versions of man pages in doc/html/ 1.5c 3/27/2002 - removed Xtutil[hc] from libaudio and removed references to Xtutil.h in the clients. Suggestion by Paul Fox. 1.5b 3/16/2002 - added patch from Marco Molteni to add a '-local' option to nasd. Specifying this option allows only local clients to connect. - moved allow_any_host into the NasConfig struct. Along with the new '-local' option. 1.5a 2/23/2002 - more STARTSERVER fixes - there was still one case where when STARTSERVER was defined, nasd could be called with the wrong display number due to a bug in _AuConnectServer. - changed LEX/YACC DEBUG token to CDEBUG to avoid conflicts when building nas with '-DDEBUG' - DEFAULT_AUSERVER is now ":0" rather than "tcp/localhost:8000". A local socket connection will startup faster than a tcp connection. - mutex.h - corrected unixware 7.x build problem (XMUTEX_INITIALIZER) in mutex.h - added same check for sun/solaris boxes - got rid of XUSE_MTSAFE_API - now controlled by NAS_USEMTSAFEAPI defined in config/NasConfig.h If you think you are having mutex problems, you can edit config/NasConfig.h and '#undef' NAS_USEMTSAFEAPI, then rebuild everthing. This will turn off threadsafety in libaudio. - added new option, 'gain', to config file in the input/output sections. This sets the default gains when nasd starts up (if MixerInit is enabled). Only in voxware for now.
2002-11-28 12:40:45 +01:00
config/NetAudio.def; \
do \
${SED} -e "s|@PKG_SYSCONFDIR@|${PKG_SYSCONFDIR}|g" \
$${file} >> $${file}.fixed; \
${MV} -f $${file}.fixed $${file}; \
done
Fix the script which munges man pages to work with Solaris' xpg4 sed, which bails out if there is whitespace before a comment.
2003-12-18 20:09:31 +01:00
@cd ${WRKSRC}; for file in \
Make this packages OSS-aware.
2002-10-18 16:02:12 +02:00
server/nasd.conf.eg \
server/dda/voxware/auvoxware.c; \
do \
${SED} -e "s|@DEVOSSAUDIO@|${DEVOSSAUDIO}|g" \
$${file} >> $${file}.fixed; \
${MV} -f $${file}.fixed $${file}; \
done
Fix the script which munges man pages to work with Solaris' xpg4 sed, which bails out if there is whitespace before a comment.
2003-12-18 20:09:31 +01:00
@cd ${WRKSRC}; for file in \
config/mungeman; \
do \
${SED} -e "s|^[ ]*#|#|g" \
$${file} >> $${file}.fixed; \
${MV} -f $${file}.fixed $${file}; \
done
Interix has no ossaudio, so don't try to use it there.
2005-01-21 22:40:43 +01:00
.include "../../mk/bsd.prefs.mk"
Nas-1.4 doesn't even try to build the voxware server on non-i386 ports, so split the PLIST in order to reflect that. (Clients work fine!)
2000-09-13 20:03:30 +02:00
PLIST_SRC= ${PKGDIR}/PLIST.clients
Interix has no ossaudio, so don't try to use it there.
2005-01-21 22:40:43 +01:00
.if ${OPSYS} != "Interix"
. if (${MACHINE_ARCH} == "i386") || \
(${MACHINE_ARCH} == "sparc")
. include "../../mk/ossaudio.buildlink3.mk"
Ensure that the voxware (OSS) audio server is built on NetBSD/sparc.
2002-12-03 10:13:39 +01:00
EGDIR= ${PREFIX}/share/examples/nas
Nas-1.4 doesn't even try to build the voxware server on non-i386 ports, so split the PLIST in order to reflect that. (Clients work fine!)
2000-09-13 20:03:30 +02:00
PLIST_SRC+= ${PKGDIR}/PLIST.voxware
Ensure that the voxware (OSS) audio server is built on NetBSD/sparc.
2002-12-03 10:13:39 +01:00
CONF_FILES= ${EGDIR}/nasd.conf.eg ${PKG_SYSCONFDIR}/nasd.conf
Interix has no ossaudio, so don't try to use it there.
2005-01-21 22:40:43 +01:00
. endif
Nas-1.4 doesn't even try to build the voxware server on non-i386 ports, so split the PLIST in order to reflect that. (Clients work fine!)
2000-09-13 20:03:30 +02:00
.endif
Add back nas package version 1.2.5, the client/server network audio system. Originally from FreeBSD, but much modified by Jaromir Dolocek, and finally munged around by agc to get the man pages correct in the Makefile.
1998-05-18 11:18:28 +02:00
.include "../../mk/bsd.pkg.mk"
Reference in a new issue Copy permalink