2006-04-23 02:12:35 +02:00
|
|
|
# $NetBSD: Makefile,v 1.75 2006/04/23 00:12:38 jlam Exp $
|
1999-09-07 15:22:50 +02:00
|
|
|
|
Update exim to 4.54. Changes since 4.52
Exim version 4.54
-----------------
PH/01 The ${base62: operator adjusted itself to base 36 when BASE_62 was
set to 36 (for Darwin and Cygwin), but the ${base62d: operator did not.
It now does.
PH/02 Two minor problems detected in Cygwin: the os.{c,h} files had lost */ on
the CVS lines, and there was a missing #if HAVE_IPV6 in host.c.
PH/03 Typo: missing ".o" in src/pcre/Makefile.
PH/04 Tighten up "personal" tests: Instead of testing for any "List-"
header line, restrict the check to what is listed in RFCs 2369 and 2929.
Also, for "Auto-Submitted", treat anything other than "no" as
non-personal, in accordance with RFC 3834. (Previously it treated
anything starting "auto-" as non-personal.)
TF/01 The control=submission/name=... option had a problem with syntax
errors if the name included a slash character. The /name= option
now slurps the rest of the string, so it can include any characters
but it must come last in the list of options (after /sender_retain
or /domain=).
PH/05 Some modifications to the interface to the fake nameserver for the new
testing suite.
Exim version 4.53
-----------------
TK/01 Added the "success_on_redirect" address verification option. See
NewStuff for rationale and an example.
PH/01 Added support for SQLite, basic code supplied by David Woodhouse.
PH/02 Patch to exigrep to allow it to work on syslog lines.
PH/03 When creating an mbox file for a virus/spam scan, use fseek() instead of
fread() to skip over the body file's header line, because in Cygwin the
header line is locked and is inaccessible.
PH/04 Added $message_exim_id, ultimately to replace $message_id (they will both
co-exist for some time) to make it clear that it is the Exim ID that is
referenced, not the Message-ID: header line.
PH/05 Replaced all Tom's calls to snprintf() with calls to the internal
string_format() function, because snprintf() does not exist on all
operating systems.
PH/06 The use of forbid_filter_existstest now also locks out the use of the
${stat: expansion item.
PH/07 Changed "SMTP protocol violation: synchronization error" into "SMTP
protocol synchronization error", to keep the pedants happy.
PH/08 Arrange for USE_INET_NTOA_FIX to be set in config.h for AIX systems as
well as for IRIX systems, when gcc is being used. See the host.c source
file for comments.
PH/09 Installed latest Cygwin configuration files from the Cygwin maintainer.
PH/10 Named domain lists were not working if used in a queue_smtp_domains
setting.
PH/11 Added support for the IGNOREQUOTA extension to LMTP, both to the lmtp
transport and to the smtp transport in LMTP mode.
TK/02 Remove one case of BASE64 error detection FTTB (undocumented anyway).
PH/12 There was a missing call to search_tidyup() before the fork() in rda.c to
run a filter in a subprocess. This could lead to confusion in subsequent
lookups in the parent process. There should also be a search_tidyup() at
the end of the subprocess.
PH/13 Previously, if "verify = helo" was set in an ACL, the condition was true
only if the host matched helo_try_verify_hosts, which caused the
verification to occur when the EHLO/HELO command was issued. The ACL just
tested the remembered result. Now, if a previous verification attempt has
not happened, "verify = helo" does it there and then.
JJ/01 exipick: added $message_exim_id variable (see 4.53-PH/04)
TK/03 Fix log output including CR from clamd.
PH/14 A reference to $reply_address when Reply-to: was empty and From: did not
exist provoked a memory error which could cause a segfault.
PH/15 Installed PCRE 6.2
PH/17 Defined BIND_8_COMPAT in the Darwin os.h file.
PH/18 Reversed 4.52/PH/17 because the HP-UX user found it wasn't the cause
of the problem. Specifically, suggested +O2 rather than +O1 for the
HP-UX compiler.
PH/19 Added sqlite_lock_timeout option (David Woodhouse's patch).
PH/20 If a delivery was routed to a non-standard port by means of an SRV
record, the port was not correctly logged when the outgoing_port log
selector was set (it logged the transort's default port).
PH/21 Added support for host-specific ports to manualroute, queryprogram,
fallback_hosts, and "hosts" in the smtp transport.
PH/22 If the log selector "outgoing_port" is set, the port is now also given on
host errors such as "Connection refused".
PH/23 Applied a patch to fix problems with exim-4.52 while doing radius
authentication with radiusclient 0.4.9:
- Error returned from rc_read_config was caught wrongly
- Username/password not passed on to radius server due to wrong length.
The presumption is that some radiusclient API changes for 4.51/PH/17
were not taken care of correctly. The code is still untested by me (my
Linux distribution still has 0.3.2 of radiusclient), but it was
contributed by a Radius user.
PH/24 When doing a callout, the value of $domain wasn't set correctly when
expanding the "port" option of the smtp transport.
TK/04 MIME ACL: Fix buffer underrun that occurs when EOF condition is met
while reading a MIME header. Thanks to Tom Hughes for a patch.
PH/24 Include config.h inside local_scan.h so that configuration settings are
available.
PH/25 Make $smtp_command_argument available after all SMTP commands. This means
that in an ACL for RCPT (for example), you can examine exactly what was
received.
PH/26 Exim was recognizing IPv6 addresses of the form [IPv6:....] in EHLO
commands, but it was not correctly comparing the address with the actual
client host address. Thus, it would show the EHLO address in Received:
header lines when this was not necessary.
PH/27 Added the % operator to ${eval:}.
PH/28 Exim tries to create and chdir to its spool directory when it starts;
it should be ignoring failures (because with -C, for example, it has lost
privilege). It wasn't ignoring creation failures other than "already
exists".
PH/29 Added "crypteq" to the list of supported features that Exim outputs when
-bV or -d is used.
PH/30 Fixed (presumably very longstanding) bug in exim_dbmbuild: if it failed
because an input line was too long, either on its own, or by virtue of
too many continuations, the temporary file was not being removed, and the
return code was incorrect.
PH/31 Missing "BOOL" in function definition in filtertest.c.
PH/32 Applied Sieve patches from the maintainer.
TK/05 Domainkeys: Accomodate for a minor API change in libdomainkeys 0.67.
PH/33 Added "verify = not_blind".
PH/34 There are settings for CHOWN_COMMAND and MV_COMMAND that can be used in
Local/Makefile (with some defaults set). These are used in built scripts
such as exicyclog, but they have never been used in the exim_install
script (though there are many overriding facilities there). I have
arranged that the exim_install script now takes note of these two
settings.
PH/35 Installed configuration files for Dragonfly.
PH/36 When a locally submitted message by a trusted user did not contain a
From: header, and the sender address was obtained from -f or from an SMTP
MAIL command, and the trusted user did not use -F to supply a sender
name, $originator_name was incorrectly used when constructing a From:
header. Furthermore, $originator_name was used for submission mode
messages from external hosts without From: headers in a similar way,
which is clearly wrong.
PH/37 Added control=suppress_local_fixups.
PH/38 When log_selector = +received_sender was set, and the addition of the
sender made the log line's construction buffer exactly full, or one byte
less than full, an overflow happened when the terminating "\n" was
subsequently added.
PH/39 Added a new log selector, "unknown_in_list", which provokes a log entry
when the result of a list match is failure because a DNS lookup failed.
PH/40 RM_COMMAND is now used in the building process.
PH/41 Added a "distclean" target to the top-level Makefile; it deletes all
the "build-* directories that it finds.
PH/42 (But a TF fix): In a domain list, Exim incorrectly matched @[] if the IP
address in a domain literal was a prefix of an interface address.
PH/43 (Again a TF fix): In the dnslookup router, do not apply widen_domains
when verifying a sender address, unless rewrite_headers is false.
PH/44 Wrote a long comment about why errors_to addresses are verified as
recipients, not senders.
TF/01 Add missing LIBS=-lm to OS/Makefile-OpenBSD which was overlooked when
the ratelimit ACL was added.
PH/45 Added $smtp_command for the full command (cf $smtp_command_argument).
PH/46 Added extra information about PostgreSQL errors to the error string.
PH/47 Added an interface to a fake DNS resolver for use by the new test suite,
avoiding the need to install special zones in a real server. This is
backwards compatible; if it can't find the fake resolver, it drops back.
Thus, both old and new test suites can be run.
TF/02 Added util/ratelimit.pl
TF/03 Minor fix to the ratelimit code to improve its behaviour in case the
clock is set back in time.
TF/04 Fix the ratelimit support in exim_fixdb. Patch provided by Brian
Candler <B.Candler@pobox.com>.
TF/05 The fix for PH/43 was not completely correct; widen_domains is always
OK for addresses that are the result of redirections.
PH/48 A number of further additions for the benefit of the new test suite,
including a fake gethostbyname() that interfaces to the fake DNS resolver
(see PH/47 above).
TF/06 The fix for widen_domains has also been applied to qualify_single and
search_parents which are the other dnslookup options that can cause
header rewrites.
PH/49 Michael Haardt's randomized retrying, but as a separate retry parameter
type ("H").
PH/50 Make never_users, trusted_users, admin_groups, trusted_groups expandable.
TF/07 Exim produced the error message "an SRV record indicated no SMTP
service" if it encountered an MX record with an empty target hostname.
The message is now "an MX or SRV record indicated no SMTP service".
TF/08 Change PH/13 introduced the possibility that verify=helo may defer,
if the DNS of the sending site is misconfigured. This is quite a
common situation. This change restores the behaviour of treating a
helo verification defer as a failure.
PH/51 If self=fail was set on a router, the bounce message did not include the
actual error message.
2005-10-09 12:43:49 +02:00
|
|
|
DISTNAME= exim-4.54
|
2006-01-08 19:35:08 +01:00
|
|
|
PKGREVISION= 2
|
1999-09-18 22:28:25 +02:00
|
|
|
CATEGORIES= mail net
|
2005-05-17 19:06:11 +02:00
|
|
|
MASTER_SITES= ftp://ftp.exim.org/pub/exim/exim4/ \
|
|
|
|
|
ftp://ftp.csx.cam.ac.uk/pub/software/email/exim/exim4/ \
|
|
|
|
|
ftp://ftp.esat.net/pub/networking/mail/mta/exim/exim4/
|
|
|
|
|
EXTRACT_SUFX= .tar.bz2
|
2000-01-09 02:29:30 +01:00
|
|
|
|
2004-05-07 20:12:58 +02:00
|
|
|
MAINTAINER= abs@NetBSD.org
|
1999-09-07 15:22:50 +02:00
|
|
|
HOMEPAGE= http://www.exim.org/
|
2001-02-17 18:52:59 +01:00
|
|
|
COMMENT= The Exim mail transfer agent, a replacement for sendmail
|
1999-09-07 15:22:50 +02:00
|
|
|
|
2003-09-02 13:14:16 +02:00
|
|
|
CONFLICTS+= exim-exiscan-[0-9]*
|
2003-08-02 19:00:06 +02:00
|
|
|
|
2005-07-16 03:19:06 +02:00
|
|
|
USE_TOOLS+= perl:run
|
2005-12-27 22:22:02 +01:00
|
|
|
INSTALLATION_DIRS+= ${PKGMANDIR}/man8
|
2003-05-03 14:14:56 +02:00
|
|
|
|
2005-05-17 19:06:11 +02:00
|
|
|
MAKE_ENV+= SSLBASE=${SSLBASE:Q}
|
2005-12-05 21:49:47 +01:00
|
|
|
MAKE_ENV+= INST_CHOWN=${CHOWN:Q}
|
update exim to 4.52.
summary of changes since 4.51 (general bug fixes and portability
fixes ommitted for brevity, see the ChangeLog for details):
Exim version 4.52
-----------------
TF/01 Added support for Client SMTP Authorization. See NewStuff for details.
PH/02 Reduce the amount of output that "make" produces by default. Full output
can still be requested.
PH/04 Installed a modified version of Tony Finch's patch to make submission
mode fix the return path as well as the Sender: header line, and to
add a /name= option so that you can make the user's friendly name appear
in the header line.
TF/03 Added the control = fakedefer ACL modifier.
TF/04 Added the ratelimit ACL condition. See NewStuff for details. Thanks to
Mark Lowes for thorough testing.
TK/02 Rewrote SPF support to work with libspf2 versions >1.2.0.
TK/03 Merged latest SRS patch from Miles Wilton.
TK/04 Added simple SPF lookup method in EXPERIMENTAL_SPF. See NewStuff for
details. Thanks to Chris Webb <chris@arachsys.com> for the patch!
PH/07 Added "fullpostmaster" verify option, which does a check to <postmaster>
without a domain if the check to <postmaster@domain> fails.
SC/01 Eximstats: added -xls and the ability to specify output files
(patch written by Frank Heydlauf).
SC/02 Eximstats: use FileHandles for outputing results.
SC/03 Eximstats: allow any combination of xls, txt, and html output.
SC/06 Eximstats: added the -include_original_destination flag
TK/06 MBOX spool code: Add real "From " MBOX separator line
so the .eml file is really in mbox format (even though
most programs do not really care). Patch from Alex Miller.
TK/07 MBOX spool code: Add X-Envelope-From: and X-Envelope-To: headers.
The latter is generated from $received_to and is only set if the
message has one envelope recipient. SA can use these headers,
obviously out-of-the-box. Patch from Alex Miller.
PH/11 Upgraded appendfile so that quotas larger than 2G are now supported.
This involved changing a lot of size variables from int to off_t. It
should work with maildirs and everything.
PH/12 Applied Alex Kiernan's patch for the API change for the error callback
function for BDB 4.3.
PH/13 Changed auto_thaw such that it does not apply to bounce messages.
PH/14 Imported PCRE 6.0; this was more than just a trivial operation because
the sources for PCRE have been re-arranged and more files are now
involved.
PH/16 Applied Matthew Newton's patch to exicyclog: "If log_file_path is set in
the configuration file to be ":syslog", then the script "guesses" where
the logs files are, rather than using the compiled in default. In our
case the guess is not the same as the compiled default, so the script
suddenly stopped working when I started to use syslog. The patch checks
to see if log_file_path is "". If so, it attempts to read it from exim
with no configuration file to get the compiled in version, before it
falls back to the previous guessing code."
TK/09 Added "prvs" and "prvscheck" expansion items. These help a lot with
implementing BATV in an Exim configuration. See NewStuff for the gory
details.
PH/18 If the "use_postmaster" option was set for a recipient callout together
with the "random" option, the postmaster address was used as the MAIL
FROM address for the random test, but not for the subsequent recipient
test. It is now used for both.
PH/19 Applied Michael Haardt's patch to update Sieve to RFC3028bis. "The
patch removes a few documentation additions to RFC 3028, because the
latest draft now contains them. It adds the new en;ascii-case comparator
and a new error check for 8bit text in MIME parts. Comparator and
require names are now matched exactly. I enabled the subaddress
extension, but it is not well tested yet (read: it works for me)."
PH/23 Added daemon_startup_retries and daemon_startup_sleep.
PH/24 Added ${if match_ip condition.
PH/28 Changed -d+all to exclude +memory, because that information is very
rarely of interest, but it makes the output a lot bigger. People tend to
do -d+all out of habit.
PH/30 Exim's DNS code uses the original T_xxx names for DNS record times. These
aren't the modern standard, and it seems that some systems' include files
don't always have them. Exim was already checking for some of the newer
ones like T_AAAA, and defining it itself. I've added checks for all the
record types that Exim uses.
TK/11 Domainkeys: Change the logic how the "testing" policy flag is retrieved
from DNS. If the selector record carries the flag, it now has
precedence over the domain-wide flag.
SC/09 Eximstats: added the -show_rt<list> and the -show_dt<list> flags
as requested by Marc Sherman.
SC/10 Eximstats: added histograms for user specified patterns as requested
by Marc Sherman.
2005-07-20 08:32:29 +02:00
|
|
|
MAKE_FLAGS+= FULLECHO=''
|
2005-05-17 19:06:11 +02:00
|
|
|
|
|
|
|
|
.include "../../mk/bsd.prefs.mk"
|
|
|
|
|
|
2005-12-05 21:49:47 +01:00
|
|
|
BUILD_DEFS+= EXIM_USER EXIM_GROUP EXIM_DB
|
2005-05-17 19:06:11 +02:00
|
|
|
|
|
|
|
|
PKG_GROUPS= ${EXIM_GROUP}
|
2006-04-23 02:12:35 +02:00
|
|
|
PKG_USERS= ${EXIM_USER}:${EXIM_GROUP}
|
|
|
|
|
|
|
|
|
|
PKG_GECOS.${EXIM_USER}= Exim mail server user
|
|
|
|
|
PKG_HOME.${EXIM_USER}= ${VARBASE}/mail
|
|
|
|
|
PKG_SHELL.${EXIM_USER}= ${NOLOGIN}
|
2005-05-17 19:06:11 +02:00
|
|
|
|
|
|
|
|
PKG_SYSCONFSUBDIR?= exim
|
|
|
|
|
EXAMPLESDIR= ${PREFIX}/share/examples/exim
|
|
|
|
|
CONF_FILES= ${EXAMPLESDIR}/aliases ${PKG_SYSCONFDIR}/aliases
|
|
|
|
|
CONF_FILES+= ${EXAMPLESDIR}/configure ${PKG_SYSCONFDIR}/configure
|
|
|
|
|
MESSAGE_SUBST+= EXAMPLESDIR="${EXAMPLESDIR}"
|
2005-12-05 21:49:47 +01:00
|
|
|
PLIST_SUBST+= DISTNAME=${DISTNAME:Q}
|
2005-05-17 19:06:11 +02:00
|
|
|
|
|
|
|
|
RCD_SCRIPTS= exim
|
|
|
|
|
|
2005-08-29 20:29:05 +02:00
|
|
|
OWN_DIRS_PERMS= ${VARBASE}/log/exim ${EXIM_USER} ${EXIM_GROUP} 0750
|
|
|
|
|
OWN_DIRS_PERMS+= ${VARBASE}/spool/exim ${EXIM_USER} ${EXIM_GROUP} 0750
|
2005-05-17 19:06:11 +02:00
|
|
|
|
|
|
|
|
# XXX: The following will be handled by buildlink3 at some point.
|
|
|
|
|
CFLAGS+= ${_STRIPFLAG_CC}
|
|
|
|
|
|
2005-09-11 01:11:40 +02:00
|
|
|
.include "options.mk"
|
|
|
|
|
|
2005-05-17 19:06:11 +02:00
|
|
|
# BDB_TYPE gets set to "db1" if USE_DB185=="yes"
|
|
|
|
|
USE_DB185?= no
|
|
|
|
|
BDB_ACCEPTED?= db1 db2 db3 db4
|
|
|
|
|
|
|
|
|
|
post-extract:
|
|
|
|
|
${MKDIR} ${WRKSRC}/Local
|
|
|
|
|
${CP} ${WRKSRC}/src/EDITME ${WRKSRC}/Local/Makefile.pkgsrc
|
|
|
|
|
${CP} ${WRKSRC}/exim_monitor/EDITME ${WRKSRC}/Local/eximon.conf.pkgsrc
|
2005-08-29 20:31:48 +02:00
|
|
|
${CP} ${FILESDIR}/Makefile-DragonFly ${FILESDIR}/os.h-DragonFly \
|
|
|
|
|
${WRKSRC}/OS/
|
2005-05-17 19:06:11 +02:00
|
|
|
|
|
|
|
|
pre-configure:
|
|
|
|
|
@${SED} -e 's:@PREFIX@:${PREFIX}:' \
|
|
|
|
|
-e 's:@PKG_SYSCONFDIR@:${PKG_SYSCONFDIR}:' \
|
|
|
|
|
-e 's:@EXIM_USER@:${EXIM_USER}:' \
|
|
|
|
|
-e 's:@EXIM_GROUP@:${EXIM_GROUP}:' \
|
|
|
|
|
-e 's:@EXIM_USE_DB_CONFIG@:${EXIM_USE_DB_CONFIG}:' \
|
|
|
|
|
-e 's:@EXIM_DBMLIB@:${EXIM_DBMLIB}:' \
|
|
|
|
|
-e 's:@EXIM_INCLUDE@:${EXIM_INCLUDE}:' \
|
2005-09-11 01:11:40 +02:00
|
|
|
-e 's:@LOOKUP_LIBS@:${LOOKUP_LIBS}:' \
|
2005-05-17 19:06:11 +02:00
|
|
|
-e 's:@CHOWN@:${CHOWN}:' \
|
|
|
|
|
-e 's:@CHGRP@:${CHGRP}:' \
|
|
|
|
|
-e 's:@MV@:${MV}:' \
|
|
|
|
|
-e 's:@RM@:${RM}:' \
|
|
|
|
|
-e 's:@PERL5@:${PERL5}:' \
|
2005-08-29 20:29:05 +02:00
|
|
|
-e 's:@VARBASE@:${VARBASE}:' \
|
2005-05-17 19:06:11 +02:00
|
|
|
< ${WRKSRC}/Local/Makefile.pkgsrc \
|
|
|
|
|
> ${WRKSRC}/Local/Makefile
|
2005-09-11 01:11:40 +02:00
|
|
|
.for opt in ${LOCAL_MAKEFILE_OPTIONS}
|
|
|
|
|
@${ECHO} ${opt} >> ${WRKSRC}/Local/Makefile
|
|
|
|
|
.endfor
|
2005-05-17 19:06:11 +02:00
|
|
|
@${SED} -e 's:@PREFIX@:${PREFIX}:' \
|
|
|
|
|
-e 's:@PKG_SYSCONFDIR@:${PKG_SYSCONFDIR}:' \
|
|
|
|
|
< ${WRKSRC}/Local/eximon.conf.pkgsrc \
|
|
|
|
|
> ${WRKSRC}/Local/eximon.conf
|
|
|
|
|
|
|
|
|
|
post-build:
|
|
|
|
|
@${SED} -e 's:@PREFIX@:${PREFIX}:' \
|
|
|
|
|
${FILESDIR}/mailer.conf.exim \
|
|
|
|
|
> ${WRKDIR}/mailer.conf
|
|
|
|
|
|
|
|
|
|
post-install:
|
|
|
|
|
${INSTALL_DATA_DIR} ${EXAMPLESDIR}
|
|
|
|
|
${INSTALL_DATA} ${WRKDIR}/mailer.conf ${EXAMPLESDIR}
|
2005-12-27 22:22:02 +01:00
|
|
|
${INSTALL_DATA} ${WRKSRC}/doc/exim.8 ${PREFIX}/${PKGMANDIR}/man8/exim.8
|
2005-05-17 19:06:11 +02:00
|
|
|
|
|
|
|
|
.include "../../security/openssl/buildlink3.mk"
|
|
|
|
|
.include "../../security/tcp_wrappers/buildlink3.mk"
|
|
|
|
|
.include "../../mk/bsd.pkg.mk"
|
