kpriv/pkgsrc
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
pkgsrc/editors/xvile/Makefile

63 lines
1.7 KiB
Makefile
Raw Normal View History

Bump all packages that use perl, or depend on a p5-* package, or are called p5-*. I hope that's all of them.
2012-10-03 23:53:53 +02:00
# $NetBSD: Makefile,v 1.65 2012/10/03 21:56:00 wiz Exp $
Initial import of FreeBSD's editors ports into the NetBSD packages system.
1997-10-06 14:41:48 +02:00
editors/xvile: Update from version 9.7 to 9.8 This package uses the distinfo and patches from editors/vile which was recently updated to version 9.8. Unfortunately it doesn't use a common makefile so there was a version mismatch. In the end, it didn't matter because the PLIST had to be significantly modified as well. These patches move xvile to version 9,8 and fixes build on DragonFly as a side benefit.
2012-08-07 11:42:35 +02:00
DISTNAME= vile-9.8
Update xvile from 9.5r to 9.6. Changes from the previous version: Changes for vile 9.6 (released Thu Dec 27 2007) > Tom Dickey: + update makefile.blc, adding charsets.c, eightbit.c and wcwidth.c + build-fix for OS/2 IBM CSet (define a delay function for catnap). + minor build-fixes for VMS: + modify vmsbuild.com to simplify workaround for broken MMS 3.8 + provide dummy variables for xvile to reflect modularization changes with respect to vmsvt.c + documentation updates. + minor fix to manfilt.c to pass-through UTF-8 codes by testing with both iswprint() and isprint(). 20071224 (u) > Tom Dickey: + separate vile's ttputc from termcap prototype to pass integer param rather than just a char on Solaris. + fix computation of columns needed to show UTF-8 codes in POSIX locale. + modify manfilt.c to provide UTF-8 output in a UTF-8 locale. + minor fix to CF_FUNC_ICONV to link iconv on cygwin (noting that cygwin has no useful locale support, it may someday). 20071202 (t) > Tom Dickey: + modify filters makefile "clean" rule to accommodate OSF/1 4.0D whose make program leaves intermediate ".c" files for each lexer. + change order of restore-flags and switch-buffer in restore_buffer_state, avoiding an unnecessary prompt to discard changes when attempting to read a buffer that cannot be read. + increase a few table sizes to work with AIX 5.1 lex. + modify check for lex version to avoid hanging on older platforms where it would try to read from standard input even if it does not recognize the option. 20071125 (s) > Tom Dickey: + several changes to provide usable Unicode support: + add mode percent-utf8 to set a threshold for file-encoding mode "auto" detection of UTF-16/UTF-32 files. + file-encoding mode can be set to "auto", to detect UTF-16 files, which are loaded as UTF-8. + UTF-8 files are detected based on the file-encoding mode as well. + Unicode values are displayed (where no locale controls) as "\uXXXX" in 4 hexadecimal digits. + add unicode-as-hex mode to override locale, forcing Unicode values to display as "\uXXXX". + for buffers with UTF-8 encoding, show illegal bytes as "\?XX". + Unicode values can be inserted into buffers using ^VuXXXX form. Limitations: + terminal drivers support Unicode display in varying degrees: + winvile - multicolumn characters, depends on font selection + termcap/terminfo - relies on terminal emulator, knows about multicolumn characters + xvile - displays only single-column characters + curses - depends on the curses library, e.g., ncursesw + win32 console - not yet implemented + combining characters are not combined. + registers hold byte data, will show the UTF-8 encoding for data rather than a \uXXXX (unless the file-encoding for [Registers] is changed). + some "characters" such as the report for yanked text is still really a byte-count. + inserting a \uXXXX into the minibuffer will display the UTF-8 encoding. + regular expressions are not wide-character aware. + UTF-16 and UTF-32 files are detected based on BOM and/or the contents of the first line of the file. + external syntax filters do not handle BOM or UTF-16, UTF-32. + improve name-completion by saving/restoring the original window and buffer when [Completions] closes, rather than the closest window. + add output from rcshist to diffmode. + add ".vbp" files to inimode. + modify configure script to omit lex-filt.l from build if lex is not really flex, since the tables are too large for the older program. + modify spell.pm to use a temporary file to work with newer Perl's that do not handle tied variables exactly as filehandles. + update Kevin Buettner's email address. + add -class option to xvile. + remove a redundant XtDestroyWidget() from x_close() to quiet a warning from XtRemoveGrab() when doing a ":q" from Xm-vile (report by Chris Green). + use va_copy() in dofmt() to work with Linux on powerpc (report by Paul van Tilburg). + add docbookmode + improve 9.5m/9.5q check for file ownership, adding a warning message for files which are ignored (report by Chris Green). + change default for --with-locale configure option to mesh with --disable-extensions. + improve paste-performance in winvile by passing whole-line chunks to the insert-function. + improved cppmode's identifier-expr (report by Gerry Fredette). + correct order of evaluation from 9.4w when setting record-separator, which was setting "crlf" ending temporarily when computing the buffer size, even when "lf" was intended. That would cause an immediate write from winvile (without change) for a buffer to write too many characters. + add syntax filter conffilt.l, for "ordinary" config-files. + add "rectangle-insert-mode". + fill in several omitted items in init_mode_value(). + add "describe-&functions" and "describe-$variables" commands. (The latter is a stub for later). + improve repainting in winvile while processing external command. also modify keyboard handling to provide type-ahead while processing external command. + remove obsolete $tpause variable. + modify majormode inferencing to check preamble for [Standard Input] and [Output] buffers. + add "&gtmotion" function for scripts. + improve handling of enumerated values by forcing all to lowercase, e.g., to eliminate the need for the special case in 9.1x to handle "TRUE" and "true". + revise lstrinsert() and associated logic which implements changes to rectangles, e.g., with c^Aq, to ensure that it pads the change with blanks rather than nulls (report by Paul van Tilburg). + improve modeline support by ignoring strict "vi" modeline options that are not recognized by vile, rather than reporting an error. + use new module blist (binary search of lists) to reduce linear searches in the places where btree is not already used. + change rename-other-buffer command to other-buffer-rename, to avoid name-completion conflict with rename-command (feedback from Steve Lembark). + remove obsolete check for ANSI qsort. + improve vilefilt.l, highlighting mode names and displaying error for unknown mode, function and state variables. + fix typo in manpage.rc which broke use of pod2man in 9.5m + add &pquote in manpage.rc, to allow it to format html output when vile-manfilt, etc., reside in directories containing spaces in their name. + add ".reg" filetypes to inimode. + add several package-related suffixes to sqlmode. + add xpmmode
2008-01-05 15:59:47 +01:00
PKGNAME= x${DISTNAME}
Bump all packages that use perl, or depend on a p5-* package, or are called p5-*. I hope that's all of them.
2012-10-03 23:53:53 +02:00
PKGREVISION= 1
Add PERL_POLLUTE to compile correctly with perl>=5.6.0 until source catches up with latest perl API. While here, modify the builds so that vile and xvile don't conflict when xpkgwedge is installed. Fixes pkg/10947 by Matthias Scheler <tron@lyssa.zhadum.de>.
2000-09-06 10:16:14 +02:00
CATEGORIES= editors
no distfile at phred.org. removed. ok'd by obache.
2009-04-28 23:07:20 +02:00
MASTER_SITES= ftp://invisible-island.net/vile/
Add PERL_POLLUTE to compile correctly with perl>=5.6.0 until source catches up with latest perl API. While here, modify the builds so that vile and xvile don't conflict when xpkgwedge is installed. Fixes pkg/10947 by Matthias Scheler <tron@lyssa.zhadum.de>.
2000-09-06 10:16:14 +02:00
EXTRACT_SUFX= .tgz
Point MAINTAINER to pkgsrc-users@NetBSD.org in the case where no developer is officially maintaining the package. The rationale for changing this from "tech-pkg" to "pkgsrc-users" is that it implies that any user can try to maintain the package (by submitting patches to the mailing list). Since the folks most likely to care about the package are the folks that want to use it or are already using it, this would leverage the energy of users who aren't developers.
2006-03-04 22:28:51 +01:00
MAINTAINER= pkgsrc-users@NetBSD.org
Update xvile to 9.5r. Based on patch provided by L. Schmidt in PR 36973. pkgsrc changes: share distinfo and patch with editor/vile XXXX: Should also share Makefile and PLIST. Changes from 9.5 to 9.5r: 20070603 (r) + amend makefile.in change for $(SRC) to use a translation rule that works with IRIX64 (and some broken BSD) make programs. + correct parsing/removal of "-i" option in winvile, taking into account double-quoting of parameters and also options which have parameters. + make configure --with-no-leaks work for external filters, e.g., using valgrind. + add configure script check for tdelete(), provide a replacement if not found (report by Gary Jennejohn). 20070528 (q) + change configure script to check for ispell before aspell; Fedora 5's problem with aspell was eventually fixed. + make cursor-adjustment after paste in xvile dependent on whether the pasted text ended with a newline (request by Eric Krohn). + cleanup the bottom line on the screen when exiting the curses driver, to match the termcap/terminfo driver (report by Chris Green). + fixes for pl-filt.c (perl highlighter): + allow blanks before tag for here-document, e.g., cat << 'TAG' + allow '~' as a quote-delimiter (this is used by linklint). + modify CF_IMAKE_CFLAGS to work with Solaris sed, which (unlike a standard UNIX implementation) does not honor nested subexpressions. + add rename-other-buffer command, use that to modify spell.rc so it can work with scratch buffers which otherwise would be lost, e.g., "[Help]". + add modelines for winvile.rc and w32ole.rc to set the majormode to rcmode, and modify a special case in main.c to make "vile winvile.rc" get the corresponding majormode. + add some null-pointer checks in filters for result from flt_alloc(). + add a check in flt_alloc() in case the pointer has not been allocated. + derive $(SRC) from $(OBJ) in makefile.in, to avoid losing trace.c in tags rule. + check for empty/default "put" in line.c's PutChar() to avoid attempting to remove a trailing newline from that, since the corresponding line has already been freed as part of the undo process (report by Paul Fox). + use O_NONBLOCK if O_NDELAY is undefined, needed for a few platforms which have the POSIX definition but not the legacy, e.g., Minix and OS X. + make autocolor work for curses-driver, e.g., --with-screen=ncurses (report by Chris Green). + widen the check for "winvile" in vileinit's initialization for win32 shifted cursor bind-key's. + modify spell filter so that it can get VILE_SPELL_FILT from the registry on win32. + improve spell filter camelcasing that when parsing things like "UXTerm" it splits off the "Term" as a possible word. + amend 9.5m change to check for file ownership to ensure this is only done for files that might be source'd. It was checking files for read/write too. + correct syntax highlighting for end of JavaScript embedded in HTML, which did not allow for the marker in an inline comment. + modify "filename" shown in :show-filtermsgs to use the buffer name if no filename is available. + modify preamble patterns for shell modes such as awk, etc., to allow for programs without an absolute pathname, e.g., "#! awk". + modify the symbol-table lookup in filters.c to use tsearch() when available. For an 8Mb rtf file this improved performance by about a factor of two (on Linux - Visual C++ has no tsearch). + add configure check for getc_unlocked(), putc_unlocked() and tsearch() to use in performance improvements for syntax filters. + add syntax filter for RTF files. + improve autocolor on win32 by not allowing the cursor to be repainted while autocoloring is in progress. + modify winvile's command-line parsing, adding "-i" option to perform the case used for "Send To": use the part of the command line after options as the filename and change working directory to match (request by Larry Gensch). 20070425 (p) > Tom Dickey: + modify spell- and txt-filters to allow users to add words to their respective ".keywords" files to override the builtin highlighting. + correct check of return of ffread() in spellflt.l's workaround for platforms such as win32 which have no usable popen(). That made spelling checks require two ^X-i presses. + modify spellflt.l to chop words according to Camel-case, so tokens such as "ChopWords" are treated by the spell checker as multiple words. + fix a limit check in argc/argv[] parsing for winvile (report by Larry Gensch). + modify wvwrap.exe to work with pathnames containing "$", "&" and "'". + change OPT_MULTIBYTE definition to depend on OPT_LOCALE. 20070115 (o) > Tom Dickey: + change Inno Setup script to not put version numbers on the SendTo and context-menu entries. + start adding support for UTF-8 (modes "byteorder-mark" and "file-encoding"). The byteorder-mark is workable, but the file-encoding is a stub. This works to strip the BOM from files as they are loaded, making syntax highlighting work for XML files. + correct two places in exec.c which used skip_blanks() rather than skip_space_tab() from 9.5l changes. This caused the command parser to treat ^K as a blank, breaking digraph.rc which uses that character (report by Gary Jennejohn). 20070108 (n) > Tom Dickey: + add a character-class check to find_b_file() to prevent names such as "<vile.1>" from being canonicalized into "vile.1" on win32 via FindFirstFile(). This fixes a problem where ^X-n would sometimes display the wrong buffer. + add shifted-cursor-key bindings for winvile, like xterm. + amend cursor-tokens mode so that ^X-e in a directory-buffer always uses the whole line (no regular expressions). + fix a null-pointer dereference in the cursor-tokens mode. + minor fix to sh-filt.l to handle lines like : ${BUILD_CC:='${CC}'} + improve iss-flt.l to highlight preprocessor lines. + improve winvile.iss (Inno Setup): + use values in patchlev.h to set the package version information. + add context menu and Send To shortcuts + install the keyword files + add configure --with-valgrind option. 20061212 (m) > Tom Dickey: + add showvariables mode, for testing expressions used in [Variables]. + correct comparisons used for handling bounds in regular expressions, e.g., the "2" in "\(this\|[l-m]\)\{2\}". + change behavior of regular expression OR'd alternatives - only the first match was used rather than the longest one. + fix configure script macros which omitted X_EXTRA_LIBS in one case, and repeated libs in another. + fill in complete list of event names for xres.key from Xt/TMParse.c + make ShowFormatted macro more configurable by allowing environment variables $VILE_NROFF_FILT and $VILE_TABLE_FILT to override the choice of programs therein. + disallow source'ing from the current directory if the source'd file might be writable by other users. + improve fences in vbs- and vbmode. + fix xresfilt.l; X resource files do not have embedded comments. + minor improvements/fixes to &default, to allow it to assume that '$' is implied for modes. + modify locale initialization to work with koi8rxterm. + add character classes [:ident:], [:octal:] and [:path:], and change the association of \w and \W to [:ident:], making [:alnum:] no longer include "_". + add cursor-tokens mode to control whether vile uses regular expressions, character classes or a combination to obtain tokens from the screen. + add $buf-fname-expr to show the combined bufname-expr, pathname-expr used to interpret ^X-e. + add bufname-expr, identifier-expr and pathname-expr buffer modes to provide regular expression parsing of $bufname, $identifier and $pathname in the show-variables command as well as for the related expansion of tokens from the cursor position. If the expressions are empty, the code falls through to use the corresponding older character-class parsing. Default values are provided for each *-expr mode. + fix a case where set-window might remove the only window before attempting to put a file in it. + quote "$HOME" in CF_SUBDIR_PATH, for cygwin users. 20061107 (l) > Tom Dickey: + modify ":describe-bindings" to show whether the command accepts a range, and whether it is undoable. + add ":goto-percent" function. + add (nvi/vim) ex-commands: a!, c!, i! + add ":c" as alias for ":change-til" (nvi/vim). + change unimplemented ":c" to ":co" (reference O'Reilly vi-book) + fix makefile dependency for tags + review/update use of "CNT" in describe-bindings + revised command-line option parsing to use scripting more effectively: + multiple startup files are allowed. + most command-line options are translated to their equivalent script and executed, rather than saving state for the most recent of each option. This makes the -s, -S, -g, -G options obsolete (but still accepted). + add "-c" option (the POSIX form of "+"). + modify configure script to use ncurses5-config, etc., if found when handling the --with-screen=ncurses or --with-screen=ncursesw options. It also is checked when handling the --with-ncurses option for the termcap/terminfo driver. + add suffix/name rules for "Jam" files. + fix preamble pattern for pymode so it does not match a ":" line which should be shmode. + implement patterns as line-specifiers in ex-mode. (this does not work with history-scrolling yet). + remove incorrect check for empty parameter from which-menu from 9.4m changes. + check xvile menu to ensure that "C" header is given, adding a dummy one if not (report by Chris Green). + add checks to ensure that neither modelines nor majormodes can alter these modes: all, crypt, readonly, viewonly. + implement vi-style modeline, limited to setting buffer- and window- modes, or majormodes. + add "#" as an alias for number-lines-til + improve highlighting of comment-lines (denoted by "--") in txtmode. + fixes for termcap syntax highlighter (tcmode): + allow description field to be empty + color the "|" between aliases. + improve string- and escape-parsing + fixes for terminfo syntax highlighter (timode): + allow description field to be empty + color the "|" between aliases. + allow aliases to contain blanks. 20060924 (k) > Paul van Tilburg + add syntax filter (mcrl) for mCRL/mCRL2 modeling language. > Tom Dickey: + modify fileread() to ensure that the error-buffer is reset after reading (or re-reading) a shell/pipe command, e.g., using ":e!". + fix configure --disable-largefile option (from ncurses). + minor fixes for nroff filter to improve rendition of groff's macros. + add configure check for ncurses 5.2(sic) on FreeBSD, which was broken by an incomplete set of changes to wchar.h (report by Chris Green). + add configure check for aspell, whose attempt at a compatibility script for ispell does not recognize ispell's options. + workaround for breakage in FreeBSD's header files: updates to wchar.h were not reflected in updates to curses.h (report by Chris Green). + remove reference to obsolete http://www.vile.cx from README (report by Paul Fox). + update config.guess, config.sub 20060625 (j) > Tom Dickey: + fix expression for shmode $mode-filename to match ".profile". + various small build-fixes (prompted by reports by Paul Fox, Clark Morgan). + amend 20050214 change to set_files_to_edit(), which caused partly- read buffer to be discarded if ffgetline() was interrupted, e.g., by a ^C during a slow pipe read. Now the buffer contents are retained. + update config.guess, config.sub 20060531 (i) > Tom Dickey: + fix error-reporting for a "~break" without a preceding "~while" (report by Clark Morgan). + minor fixes for tc-filt.l (termcap mode). + fix x11.c for Motif broken in 9.5f cleanup (reported by Paul Fox). + improve bas-filt.l by not highlighting incidental matches in the attribute section of a Visual Basic form-file. + correct parsing of hexadecimal constants in bas-filt.l + add .ctl suffix for vbmode + fix a case in bsizes() which subtracted line-ending from zero-sized buffer when nonewline mode was set (Debian #368007). 20060521 (h) > Clark Morgan: + document write-all-buffers command. + add echo-to-clipboard mode for Win32 hosts: all text selected with the mouse is automatically copied to the Windows clipboard. (U) > Paul Fox: + updated contact information in README, vile.1 and vile.hlp > Tom Dickey: + allow a version number in rbmode (ruby) preamble. + add check in m4-filt.c for unbalanced quote, show the affected area as an error. + add ".ddl" suffix to sqlmode. + add ".dsr" suffix to vbmode. + fix makefile.blc, broken in 9.5f cleanup. + fixes for 64-bit warnings of Visual Studio .NET 2003: + modify Member_Offset() macro to cast the difference between addresses to a long rather than casting a pointer to a long. Use this flavor for Visual C++. + size_t is not necessarily the same size as unsigned - modify code to use size_t where it is consistent, otherwise cast as needed. + updated for python keywords + modify some lex filters, e.g., sql, to exclude \r in the places that exclude \n, since \r should not be colored. + fix for tb_enquote(); a value pointed to memory that had been reallocated. + make OBJEXT configure feature work for optional objects such as api.o + updated configure macros CF_CURSES_CPPFLAGS, CF_CURSES_LIBS, CF_NCURSES_CPPFLAGS, CF_PATH_SYNTAX, CF_WITH_IMAKE_CFLAGS, CF_XOPEN_SOURCE. + update config.guess, config.sub 20060402 (g) > Tom Dickey: + minor fixes to make most of the lex filters build with "old" lex, e.g., http://heirloom.sourceforge.net/devtools.html Note: the lex-filt.l file is too complex for some older lex's. + add lua mode + save/restore curgoal variable in b2vprintf() to avoid side effects when invoking "backward-row" or "forward-row" commands (report by Chris Green). + add delphi mode + add "*.cs" files to grep macros on win32 platform + improve csmode by making the section macros look for function headers. 20060219 (f) > Clark Morgan: + update vile.hlp for %n and %N title format changes. > Tom Dickey: + fix sh-filt.l for parameter substitutions containing an escaped quote, e.g., VERSION=${VERSION#*VERSION \"} VERSION=${VERSION%\"*} + add csmode (for C# ".cs" files) and cs.key, using vile-c-filter for parsing. + modify ntwinio.c to invoke build_recent_file_and_folder_menus() in the WM_INITMENUPOPUP event rather than WM_SYSCOMMAND. This makes winvile initialize the recent-folders and recent-files if one uses a right-click on the title of the window. + change winvile's registry subkey for recent-folders and recent-files to match environment variable settings from 9.4r, e.g., change "Software\winvile\MRUFiles" to "Software\VI Like Emacs\MRUFiles" + add new symbols $return and $_ which can be used to implement simple functions (request by William James). + fix filters/makefile.2nd to allow build for gcov + improve majormodes for complex fences by initializing the (non-string) buffer mode values for submode groups according to the values in the submode. This makes ignorecase work as expected in the complex fence matching for vbmode. + add complex fences to vbmode. + minor fix to bat-filt.l to avoid highlighting ".bat" as a string in call foo.bat + change htmlfilt.l to highlight character- and URI-references as numbers to make them distinct from strings with ordinary text. + add makefile rules for installing/uninstalling files from doc directory: install-doc uninstall-doc as well as installing/uninstalling macros install-macros uninstall-macros uninstall-perl + correct logic for goto-char, broken in 9.4za (report by William James). + fix change to cpp.key in 9.5e, which put the C keywords in the wrong table. + add spell.rc to makefile.wnt install rule. + add test_io.exe rule to vmsbuild.com + add TERM.clean(), TERM.unclean(), TERM.openup() to help move diverse code out of termio.c + modify var_TITLEFORMAT() only call set_editor_title() when setting $title-format, and modify get_statevar_val() to handle some limited recursion just in case there are other cases where it could be called from the statevar.c module while retrieving a value. This fixes a bug introduced in 9.5e (report by Clark Morgan). + update title when doing a "cd", in case it uses %r substitution. + change %n in modeline substitutions to use file name (pathleaf) rather than relative path (shorten_path). Use %r for the latter. (request by Clark Morgan). + move VMS-specific code from termio.c to vmsvt.c + remove unused start_debug_log() and mallocdbg() from main.c + correct typo in ifdef for Visual Studio C++ 6.0 ifdef in w32ole.cpp from 9.5e changes. + move 9.5c check for stdout not a tty on startup to allow "vile -V" to pipe to other programs. + split-out nullterm.c + add test_io stub, to help isolate dependencies of the I/O drivers. 20060109 (e) > Clark Morgan: + improved winvile's "flash". + several changes to w32reg.c: + if at all possible, don't register ole-enabled winvile using the path ".\winvile.exe" (obscure cygwin corner case). + remove use of toUpper(), which is not legit for winvile in this context because the underlying mapping array is apparently _not_ initialized. With this fix, "winvile -Ou" now displays the editor's name in MessageBox text (rather than ""). + fixed lots of misuses of registry APIs (not properly testing return code). With fixes in place, winvile -Ou/-Or now properly reports an error when registration/unregistration is attempted by an account with insufficient privileges. + add section definitions to vbmode. + fix: wvwrap caused winvile to show an 8.3 folder name in Recent Folders list. + fix: when CD'ing to a directory stored in winvile's "recent folders" list, the cursor stayed in the mini-buffer following a call to pwd(). > Tom Dickey: + adjust makefile dependencies to allow "make -j4" when building the loadable filter configuration (report by Ciaran McCreesh). + add "+", ",", "&", "@" and ";" to URL patterns in filters. + modify nr-filt.l to allow for optional blanks between the leading "." and the command. This is common in nroff library macros, not in manpages, etc. + improve lex-filt.l, allowing for some flex extensions: + allow code in action rules to not have curly braces + allow curly-braces to surround chunks of flex actions + "*" as a state name. + add named marks for decimal digits (request by George Eccles). + fix stray ^@'s on the winvile popup menu resulting from changes to kcod2prc() for xterm-fkeys mode (report by Clark Morgan). + add a call to set_editor_title() at the end of swbuffer_lfl() to make title updates work properly with termcap configuration. + add %n and %N substitutions for $title-format (prompted by Clark Morgan comments). + modify FreeBuffer() to clear window's buffer-pointers that point to the freed buffer, e.g., to prevent reference to free memory in title updates (report by Clark Morgan). + check file descriptors in stdin_data_available() to avoid doing a fdopen() on an invalid descriptor. + add "#import" in cpp.key + modify preamble for xml- and html-modes to ensure that the first tag determines the type. + fixes to makefile.wnt and mkprlenv.wnt to work with Visual C++ 7. + correct padding of subtitle line for "Temporary variables" in [Variables] buffer, which was applied to all temporary variable lines. 20051129 (d) > Tom Dickey: + fix vl_ctype.h to avoid redefinition of UCHAR (reports by Clark Morgan, Mark Robinson). + fix lex-filt.l to build with lex (report by Dave Rolfe). + fix include-path in makefile.wnt, makefile.djg makefile.icc to work with split-out headers for regexp.c + remove code for DISP_IBMPC + remove makefile.emx and config.emx (obsolete). + remove makefile.wat and makefile.tbc, since they used ibmpc.c 20051123 (c) > Clark Morgan: + remove an obsolete comment in macros.doc regarding underscore in macro names. > Paul Fox: + correct logic for check_percent_crlf(), ensuring that empty buffers are not counted as having CRLF endings. > Tom Dickey: + fix to_tabstop() function used for :describe-bindings to ensure that a binding that happens to be 8 columns will still have a tab after it. + add a fflush() to ensure that the control string to reset xterm mouse mode is written during ^Z handling (report by Fabien Coutant). + add a call to term.kopen() in rtfrmshell(), making ^Z/resume work properly with the curses driver (report by Fabien Coutant). + make mouse work for curses driver just like the termcap/terminfo driver. + split xterm-specific code out of tcap.c as xterm.c, to share with curses.c + indent'd borland.c + remove ibmpc.c (obsolete) + check if stdout is not a tty on startup, print error message and exit (request by Paul Fox). + add mode xterm-fkeys, to allow termcap driver to generate shift/control/alt modifiers for function keys. + modify regexp.c so tab is not matched by \p or [[:print:]] for consistency with POSIX regular expressions. + modified regexp.c, add headers vl_regex.h, vl_alloc.h and vl_ctype.h to allow it to be easily built outside vile (request by Adrian Kole). + add KEY_BackTab to the output of show-key-names + fix kcod2prc() so that a shifted-tab is converted to "Shift+^I" rather than emitting a literal tab in the result. + update vilemenu.rc fonts to work on Debian/testing. + improve scrollbar/cursor tracking in winvile by calling gui_update_scrollbar() when WFMOVE flag is set (report by Deraj Puma). + add a simple csvmode for ".csv" files. + add ".ebuild" suffix for shmode. + improve mode-pathname for xresmode to handle things like KOI8Term. 20051002 (b) > Tom Dickey: + update config.guess, config.sub + improve os2vio.c, adding a check to distinguish between fullscreen and VIO to allow using bright background colors in the latter (report by George Eccles). + add KEY_xxx definitions to OS/2 and Win32 drivers, defining up to KEY_F35 for the former and KEY_F24 for the latter (report by George Eccles). + several improvements and fixes to lex-filt.l + expressions for regular expression parsing are more complete, which allows separating patterns from state lists. That allows some error-checking in the rules section to flag spurious whitespace after a regular expression. The more-complete regular expressions make the parser much larger (about 5 times the original size). A rewrite in C might be shorter. + ignore case of "%s" vs "%S" or "%state", etc. + parse the pattern names, applying highlighting to the names where they are embedded in regular expressions. + parse the "%s" (state) lists, applying highlighting to the states. + handle flex's <<EOF>> token. + handle character classes in the RANGE pattern. + remove an update() call from the logic in input.c which decodes hex/octal input after a ^V. That caused the screen to move the view according to the address in the command, e.g., :%s/^Vx12 would scroll to the bottom on entry of the "x" (report by Daniel L Ashbrook). + correct behavior of set-dos command, which did not recompute the buffer-size. + make end-of-token test for store-proc consistent with bind-key, i.e., alphanumerics and hyphen. Amend that test to allow underscore (report by George Eccles). 20050905 (a) > Tom Dickey: + review/improve vl-filt.l based on Verilog LRM draft + add configure check for lex's which support character classes, and add filters/noclass.sh to work around those which do not. + improvements to configure script from ncurses: + improve check for Intel compiler warnings + improve check for gcc version + define _QNX_SOURCE for QNX + revert part of 9.4n, which caused readin() to return false if there was no filename associated with the buffer. Doing this broke some macros such as which-keywords (using buffer constructed by the macro). Previously it returned true, indicating success. + improve parsing of range expressions in lex-filt.l, fixes a case exposed by css-filt.l + correct a case where slowread() in dosmode would compute a correct buffer size. + modify bat-filt.l to highlight "echo." consistently with M$ usage. + modify bat-filt.l to highlight "%*". + add syntax filters for bnf, css, midl, php and wbt (WinBatch). + modify syntax filters to use flex's character classes
2007-10-14 08:33:17 +02:00
HOMEPAGE= http://invisible-island.net/vile/
Update to new COMMENT style: COMMENT var in Makefile instead of pkg/COMMENT.
2001-02-16 15:38:16 +01:00
COMMENT= VI Like Emacs, X11 version -- a fully "X aware" vi work-alike
editors/xvile: Update from version 9.7 to 9.8 This package uses the distinfo and patches from editors/vile which was recently updated to version 9.8. Unfortunately it doesn't use a common makefile so there was a version mismatch. In the end, it didn't matter because the PLIST had to be significantly modified as well. These patches move xvile to version 9,8 and fixes build on DragonFly as a side benefit.
2012-08-07 11:42:35 +02:00
LICENSE= gnu-gpl-v2
Add PERL_POLLUTE to compile correctly with perl>=5.6.0 until source catches up with latest perl API. While here, modify the builds so that vile and xvile don't conflict when xpkgwedge is installed. Fixes pkg/10947 by Matthias Scheler <tron@lyssa.zhadum.de>.
2000-09-06 10:16:14 +02:00
Update xvile to 9.5r. Based on patch provided by L. Schmidt in PR 36973. pkgsrc changes: share distinfo and patch with editor/vile XXXX: Should also share Makefile and PLIST. Changes from 9.5 to 9.5r: 20070603 (r) + amend makefile.in change for $(SRC) to use a translation rule that works with IRIX64 (and some broken BSD) make programs. + correct parsing/removal of "-i" option in winvile, taking into account double-quoting of parameters and also options which have parameters. + make configure --with-no-leaks work for external filters, e.g., using valgrind. + add configure script check for tdelete(), provide a replacement if not found (report by Gary Jennejohn). 20070528 (q) + change configure script to check for ispell before aspell; Fedora 5's problem with aspell was eventually fixed. + make cursor-adjustment after paste in xvile dependent on whether the pasted text ended with a newline (request by Eric Krohn). + cleanup the bottom line on the screen when exiting the curses driver, to match the termcap/terminfo driver (report by Chris Green). + fixes for pl-filt.c (perl highlighter): + allow blanks before tag for here-document, e.g., cat << 'TAG' + allow '~' as a quote-delimiter (this is used by linklint). + modify CF_IMAKE_CFLAGS to work with Solaris sed, which (unlike a standard UNIX implementation) does not honor nested subexpressions. + add rename-other-buffer command, use that to modify spell.rc so it can work with scratch buffers which otherwise would be lost, e.g., "[Help]". + add modelines for winvile.rc and w32ole.rc to set the majormode to rcmode, and modify a special case in main.c to make "vile winvile.rc" get the corresponding majormode. + add some null-pointer checks in filters for result from flt_alloc(). + add a check in flt_alloc() in case the pointer has not been allocated. + derive $(SRC) from $(OBJ) in makefile.in, to avoid losing trace.c in tags rule. + check for empty/default "put" in line.c's PutChar() to avoid attempting to remove a trailing newline from that, since the corresponding line has already been freed as part of the undo process (report by Paul Fox). + use O_NONBLOCK if O_NDELAY is undefined, needed for a few platforms which have the POSIX definition but not the legacy, e.g., Minix and OS X. + make autocolor work for curses-driver, e.g., --with-screen=ncurses (report by Chris Green). + widen the check for "winvile" in vileinit's initialization for win32 shifted cursor bind-key's. + modify spell filter so that it can get VILE_SPELL_FILT from the registry on win32. + improve spell filter camelcasing that when parsing things like "UXTerm" it splits off the "Term" as a possible word. + amend 9.5m change to check for file ownership to ensure this is only done for files that might be source'd. It was checking files for read/write too. + correct syntax highlighting for end of JavaScript embedded in HTML, which did not allow for the marker in an inline comment. + modify "filename" shown in :show-filtermsgs to use the buffer name if no filename is available. + modify preamble patterns for shell modes such as awk, etc., to allow for programs without an absolute pathname, e.g., "#! awk". + modify the symbol-table lookup in filters.c to use tsearch() when available. For an 8Mb rtf file this improved performance by about a factor of two (on Linux - Visual C++ has no tsearch). + add configure check for getc_unlocked(), putc_unlocked() and tsearch() to use in performance improvements for syntax filters. + add syntax filter for RTF files. + improve autocolor on win32 by not allowing the cursor to be repainted while autocoloring is in progress. + modify winvile's command-line parsing, adding "-i" option to perform the case used for "Send To": use the part of the command line after options as the filename and change working directory to match (request by Larry Gensch). 20070425 (p) > Tom Dickey: + modify spell- and txt-filters to allow users to add words to their respective ".keywords" files to override the builtin highlighting. + correct check of return of ffread() in spellflt.l's workaround for platforms such as win32 which have no usable popen(). That made spelling checks require two ^X-i presses. + modify spellflt.l to chop words according to Camel-case, so tokens such as "ChopWords" are treated by the spell checker as multiple words. + fix a limit check in argc/argv[] parsing for winvile (report by Larry Gensch). + modify wvwrap.exe to work with pathnames containing "$", "&" and "'". + change OPT_MULTIBYTE definition to depend on OPT_LOCALE. 20070115 (o) > Tom Dickey: + change Inno Setup script to not put version numbers on the SendTo and context-menu entries. + start adding support for UTF-8 (modes "byteorder-mark" and "file-encoding"). The byteorder-mark is workable, but the file-encoding is a stub. This works to strip the BOM from files as they are loaded, making syntax highlighting work for XML files. + correct two places in exec.c which used skip_blanks() rather than skip_space_tab() from 9.5l changes. This caused the command parser to treat ^K as a blank, breaking digraph.rc which uses that character (report by Gary Jennejohn). 20070108 (n) > Tom Dickey: + add a character-class check to find_b_file() to prevent names such as "<vile.1>" from being canonicalized into "vile.1" on win32 via FindFirstFile(). This fixes a problem where ^X-n would sometimes display the wrong buffer. + add shifted-cursor-key bindings for winvile, like xterm. + amend cursor-tokens mode so that ^X-e in a directory-buffer always uses the whole line (no regular expressions). + fix a null-pointer dereference in the cursor-tokens mode. + minor fix to sh-filt.l to handle lines like : ${BUILD_CC:='${CC}'} + improve iss-flt.l to highlight preprocessor lines. + improve winvile.iss (Inno Setup): + use values in patchlev.h to set the package version information. + add context menu and Send To shortcuts + install the keyword files + add configure --with-valgrind option. 20061212 (m) > Tom Dickey: + add showvariables mode, for testing expressions used in [Variables]. + correct comparisons used for handling bounds in regular expressions, e.g., the "2" in "\(this\|[l-m]\)\{2\}". + change behavior of regular expression OR'd alternatives - only the first match was used rather than the longest one. + fix configure script macros which omitted X_EXTRA_LIBS in one case, and repeated libs in another. + fill in complete list of event names for xres.key from Xt/TMParse.c + make ShowFormatted macro more configurable by allowing environment variables $VILE_NROFF_FILT and $VILE_TABLE_FILT to override the choice of programs therein. + disallow source'ing from the current directory if the source'd file might be writable by other users. + improve fences in vbs- and vbmode. + fix xresfilt.l; X resource files do not have embedded comments. + minor improvements/fixes to &default, to allow it to assume that '$' is implied for modes. + modify locale initialization to work with koi8rxterm. + add character classes [:ident:], [:octal:] and [:path:], and change the association of \w and \W to [:ident:], making [:alnum:] no longer include "_". + add cursor-tokens mode to control whether vile uses regular expressions, character classes or a combination to obtain tokens from the screen. + add $buf-fname-expr to show the combined bufname-expr, pathname-expr used to interpret ^X-e. + add bufname-expr, identifier-expr and pathname-expr buffer modes to provide regular expression parsing of $bufname, $identifier and $pathname in the show-variables command as well as for the related expansion of tokens from the cursor position. If the expressions are empty, the code falls through to use the corresponding older character-class parsing. Default values are provided for each *-expr mode. + fix a case where set-window might remove the only window before attempting to put a file in it. + quote "$HOME" in CF_SUBDIR_PATH, for cygwin users. 20061107 (l) > Tom Dickey: + modify ":describe-bindings" to show whether the command accepts a range, and whether it is undoable. + add ":goto-percent" function. + add (nvi/vim) ex-commands: a!, c!, i! + add ":c" as alias for ":change-til" (nvi/vim). + change unimplemented ":c" to ":co" (reference O'Reilly vi-book) + fix makefile dependency for tags + review/update use of "CNT" in describe-bindings + revised command-line option parsing to use scripting more effectively: + multiple startup files are allowed. + most command-line options are translated to their equivalent script and executed, rather than saving state for the most recent of each option. This makes the -s, -S, -g, -G options obsolete (but still accepted). + add "-c" option (the POSIX form of "+"). + modify configure script to use ncurses5-config, etc., if found when handling the --with-screen=ncurses or --with-screen=ncursesw options. It also is checked when handling the --with-ncurses option for the termcap/terminfo driver. + add suffix/name rules for "Jam" files. + fix preamble pattern for pymode so it does not match a ":" line which should be shmode. + implement patterns as line-specifiers in ex-mode. (this does not work with history-scrolling yet). + remove incorrect check for empty parameter from which-menu from 9.4m changes. + check xvile menu to ensure that "C" header is given, adding a dummy one if not (report by Chris Green). + add checks to ensure that neither modelines nor majormodes can alter these modes: all, crypt, readonly, viewonly. + implement vi-style modeline, limited to setting buffer- and window- modes, or majormodes. + add "#" as an alias for number-lines-til + improve highlighting of comment-lines (denoted by "--") in txtmode. + fixes for termcap syntax highlighter (tcmode): + allow description field to be empty + color the "|" between aliases. + improve string- and escape-parsing + fixes for terminfo syntax highlighter (timode): + allow description field to be empty + color the "|" between aliases. + allow aliases to contain blanks. 20060924 (k) > Paul van Tilburg + add syntax filter (mcrl) for mCRL/mCRL2 modeling language. > Tom Dickey: + modify fileread() to ensure that the error-buffer is reset after reading (or re-reading) a shell/pipe command, e.g., using ":e!". + fix configure --disable-largefile option (from ncurses). + minor fixes for nroff filter to improve rendition of groff's macros. + add configure check for ncurses 5.2(sic) on FreeBSD, which was broken by an incomplete set of changes to wchar.h (report by Chris Green). + add configure check for aspell, whose attempt at a compatibility script for ispell does not recognize ispell's options. + workaround for breakage in FreeBSD's header files: updates to wchar.h were not reflected in updates to curses.h (report by Chris Green). + remove reference to obsolete http://www.vile.cx from README (report by Paul Fox). + update config.guess, config.sub 20060625 (j) > Tom Dickey: + fix expression for shmode $mode-filename to match ".profile". + various small build-fixes (prompted by reports by Paul Fox, Clark Morgan). + amend 20050214 change to set_files_to_edit(), which caused partly- read buffer to be discarded if ffgetline() was interrupted, e.g., by a ^C during a slow pipe read. Now the buffer contents are retained. + update config.guess, config.sub 20060531 (i) > Tom Dickey: + fix error-reporting for a "~break" without a preceding "~while" (report by Clark Morgan). + minor fixes for tc-filt.l (termcap mode). + fix x11.c for Motif broken in 9.5f cleanup (reported by Paul Fox). + improve bas-filt.l by not highlighting incidental matches in the attribute section of a Visual Basic form-file. + correct parsing of hexadecimal constants in bas-filt.l + add .ctl suffix for vbmode + fix a case in bsizes() which subtracted line-ending from zero-sized buffer when nonewline mode was set (Debian #368007). 20060521 (h) > Clark Morgan: + document write-all-buffers command. + add echo-to-clipboard mode for Win32 hosts: all text selected with the mouse is automatically copied to the Windows clipboard. (U) > Paul Fox: + updated contact information in README, vile.1 and vile.hlp > Tom Dickey: + allow a version number in rbmode (ruby) preamble. + add check in m4-filt.c for unbalanced quote, show the affected area as an error. + add ".ddl" suffix to sqlmode. + add ".dsr" suffix to vbmode. + fix makefile.blc, broken in 9.5f cleanup. + fixes for 64-bit warnings of Visual Studio .NET 2003: + modify Member_Offset() macro to cast the difference between addresses to a long rather than casting a pointer to a long. Use this flavor for Visual C++. + size_t is not necessarily the same size as unsigned - modify code to use size_t where it is consistent, otherwise cast as needed. + updated for python keywords + modify some lex filters, e.g., sql, to exclude \r in the places that exclude \n, since \r should not be colored. + fix for tb_enquote(); a value pointed to memory that had been reallocated. + make OBJEXT configure feature work for optional objects such as api.o + updated configure macros CF_CURSES_CPPFLAGS, CF_CURSES_LIBS, CF_NCURSES_CPPFLAGS, CF_PATH_SYNTAX, CF_WITH_IMAKE_CFLAGS, CF_XOPEN_SOURCE. + update config.guess, config.sub 20060402 (g) > Tom Dickey: + minor fixes to make most of the lex filters build with "old" lex, e.g., http://heirloom.sourceforge.net/devtools.html Note: the lex-filt.l file is too complex for some older lex's. + add lua mode + save/restore curgoal variable in b2vprintf() to avoid side effects when invoking "backward-row" or "forward-row" commands (report by Chris Green). + add delphi mode + add "*.cs" files to grep macros on win32 platform + improve csmode by making the section macros look for function headers. 20060219 (f) > Clark Morgan: + update vile.hlp for %n and %N title format changes. > Tom Dickey: + fix sh-filt.l for parameter substitutions containing an escaped quote, e.g., VERSION=${VERSION#*VERSION \"} VERSION=${VERSION%\"*} + add csmode (for C# ".cs" files) and cs.key, using vile-c-filter for parsing. + modify ntwinio.c to invoke build_recent_file_and_folder_menus() in the WM_INITMENUPOPUP event rather than WM_SYSCOMMAND. This makes winvile initialize the recent-folders and recent-files if one uses a right-click on the title of the window. + change winvile's registry subkey for recent-folders and recent-files to match environment variable settings from 9.4r, e.g., change "Software\winvile\MRUFiles" to "Software\VI Like Emacs\MRUFiles" + add new symbols $return and $_ which can be used to implement simple functions (request by William James). + fix filters/makefile.2nd to allow build for gcov + improve majormodes for complex fences by initializing the (non-string) buffer mode values for submode groups according to the values in the submode. This makes ignorecase work as expected in the complex fence matching for vbmode. + add complex fences to vbmode. + minor fix to bat-filt.l to avoid highlighting ".bat" as a string in call foo.bat + change htmlfilt.l to highlight character- and URI-references as numbers to make them distinct from strings with ordinary text. + add makefile rules for installing/uninstalling files from doc directory: install-doc uninstall-doc as well as installing/uninstalling macros install-macros uninstall-macros uninstall-perl + correct logic for goto-char, broken in 9.4za (report by William James). + fix change to cpp.key in 9.5e, which put the C keywords in the wrong table. + add spell.rc to makefile.wnt install rule. + add test_io.exe rule to vmsbuild.com + add TERM.clean(), TERM.unclean(), TERM.openup() to help move diverse code out of termio.c + modify var_TITLEFORMAT() only call set_editor_title() when setting $title-format, and modify get_statevar_val() to handle some limited recursion just in case there are other cases where it could be called from the statevar.c module while retrieving a value. This fixes a bug introduced in 9.5e (report by Clark Morgan). + update title when doing a "cd", in case it uses %r substitution. + change %n in modeline substitutions to use file name (pathleaf) rather than relative path (shorten_path). Use %r for the latter. (request by Clark Morgan). + move VMS-specific code from termio.c to vmsvt.c + remove unused start_debug_log() and mallocdbg() from main.c + correct typo in ifdef for Visual Studio C++ 6.0 ifdef in w32ole.cpp from 9.5e changes. + move 9.5c check for stdout not a tty on startup to allow "vile -V" to pipe to other programs. + split-out nullterm.c + add test_io stub, to help isolate dependencies of the I/O drivers. 20060109 (e) > Clark Morgan: + improved winvile's "flash". + several changes to w32reg.c: + if at all possible, don't register ole-enabled winvile using the path ".\winvile.exe" (obscure cygwin corner case). + remove use of toUpper(), which is not legit for winvile in this context because the underlying mapping array is apparently _not_ initialized. With this fix, "winvile -Ou" now displays the editor's name in MessageBox text (rather than ""). + fixed lots of misuses of registry APIs (not properly testing return code). With fixes in place, winvile -Ou/-Or now properly reports an error when registration/unregistration is attempted by an account with insufficient privileges. + add section definitions to vbmode. + fix: wvwrap caused winvile to show an 8.3 folder name in Recent Folders list. + fix: when CD'ing to a directory stored in winvile's "recent folders" list, the cursor stayed in the mini-buffer following a call to pwd(). > Tom Dickey: + adjust makefile dependencies to allow "make -j4" when building the loadable filter configuration (report by Ciaran McCreesh). + add "+", ",", "&", "@" and ";" to URL patterns in filters. + modify nr-filt.l to allow for optional blanks between the leading "." and the command. This is common in nroff library macros, not in manpages, etc. + improve lex-filt.l, allowing for some flex extensions: + allow code in action rules to not have curly braces + allow curly-braces to surround chunks of flex actions + "*" as a state name. + add named marks for decimal digits (request by George Eccles). + fix stray ^@'s on the winvile popup menu resulting from changes to kcod2prc() for xterm-fkeys mode (report by Clark Morgan). + add a call to set_editor_title() at the end of swbuffer_lfl() to make title updates work properly with termcap configuration. + add %n and %N substitutions for $title-format (prompted by Clark Morgan comments). + modify FreeBuffer() to clear window's buffer-pointers that point to the freed buffer, e.g., to prevent reference to free memory in title updates (report by Clark Morgan). + check file descriptors in stdin_data_available() to avoid doing a fdopen() on an invalid descriptor. + add "#import" in cpp.key + modify preamble for xml- and html-modes to ensure that the first tag determines the type. + fixes to makefile.wnt and mkprlenv.wnt to work with Visual C++ 7. + correct padding of subtitle line for "Temporary variables" in [Variables] buffer, which was applied to all temporary variable lines. 20051129 (d) > Tom Dickey: + fix vl_ctype.h to avoid redefinition of UCHAR (reports by Clark Morgan, Mark Robinson). + fix lex-filt.l to build with lex (report by Dave Rolfe). + fix include-path in makefile.wnt, makefile.djg makefile.icc to work with split-out headers for regexp.c + remove code for DISP_IBMPC + remove makefile.emx and config.emx (obsolete). + remove makefile.wat and makefile.tbc, since they used ibmpc.c 20051123 (c) > Clark Morgan: + remove an obsolete comment in macros.doc regarding underscore in macro names. > Paul Fox: + correct logic for check_percent_crlf(), ensuring that empty buffers are not counted as having CRLF endings. > Tom Dickey: + fix to_tabstop() function used for :describe-bindings to ensure that a binding that happens to be 8 columns will still have a tab after it. + add a fflush() to ensure that the control string to reset xterm mouse mode is written during ^Z handling (report by Fabien Coutant). + add a call to term.kopen() in rtfrmshell(), making ^Z/resume work properly with the curses driver (report by Fabien Coutant). + make mouse work for curses driver just like the termcap/terminfo driver. + split xterm-specific code out of tcap.c as xterm.c, to share with curses.c + indent'd borland.c + remove ibmpc.c (obsolete) + check if stdout is not a tty on startup, print error message and exit (request by Paul Fox). + add mode xterm-fkeys, to allow termcap driver to generate shift/control/alt modifiers for function keys. + modify regexp.c so tab is not matched by \p or [[:print:]] for consistency with POSIX regular expressions. + modified regexp.c, add headers vl_regex.h, vl_alloc.h and vl_ctype.h to allow it to be easily built outside vile (request by Adrian Kole). + add KEY_BackTab to the output of show-key-names + fix kcod2prc() so that a shifted-tab is converted to "Shift+^I" rather than emitting a literal tab in the result. + update vilemenu.rc fonts to work on Debian/testing. + improve scrollbar/cursor tracking in winvile by calling gui_update_scrollbar() when WFMOVE flag is set (report by Deraj Puma). + add a simple csvmode for ".csv" files. + add ".ebuild" suffix for shmode. + improve mode-pathname for xresmode to handle things like KOI8Term. 20051002 (b) > Tom Dickey: + update config.guess, config.sub + improve os2vio.c, adding a check to distinguish between fullscreen and VIO to allow using bright background colors in the latter (report by George Eccles). + add KEY_xxx definitions to OS/2 and Win32 drivers, defining up to KEY_F35 for the former and KEY_F24 for the latter (report by George Eccles). + several improvements and fixes to lex-filt.l + expressions for regular expression parsing are more complete, which allows separating patterns from state lists. That allows some error-checking in the rules section to flag spurious whitespace after a regular expression. The more-complete regular expressions make the parser much larger (about 5 times the original size). A rewrite in C might be shorter. + ignore case of "%s" vs "%S" or "%state", etc. + parse the pattern names, applying highlighting to the names where they are embedded in regular expressions. + parse the "%s" (state) lists, applying highlighting to the states. + handle flex's <<EOF>> token. + handle character classes in the RANGE pattern. + remove an update() call from the logic in input.c which decodes hex/octal input after a ^V. That caused the screen to move the view according to the address in the command, e.g., :%s/^Vx12 would scroll to the bottom on entry of the "x" (report by Daniel L Ashbrook). + correct behavior of set-dos command, which did not recompute the buffer-size. + make end-of-token test for store-proc consistent with bind-key, i.e., alphanumerics and hyphen. Amend that test to allow underscore (report by George Eccles). 20050905 (a) > Tom Dickey: + review/improve vl-filt.l based on Verilog LRM draft + add configure check for lex's which support character classes, and add filters/noclass.sh to work around those which do not. + improvements to configure script from ncurses: + improve check for Intel compiler warnings + improve check for gcc version + define _QNX_SOURCE for QNX + revert part of 9.4n, which caused readin() to return false if there was no filename associated with the buffer. Doing this broke some macros such as which-keywords (using buffer constructed by the macro). Previously it returned true, indicating success. + improve parsing of range expressions in lex-filt.l, fixes a case exposed by css-filt.l + correct a case where slowread() in dosmode would compute a correct buffer size. + modify bat-filt.l to highlight "echo." consistently with M$ usage. + modify bat-filt.l to highlight "%*". + add syntax filters for bnf, css, midl, php and wbt (WinBatch). + modify syntax filters to use flex's character classes
2007-10-14 08:33:17 +02:00
DISTINFO_FILE= ${.CURDIR}/../../editors/vile/distinfo
PATCHDIR= ${.CURDIR}/../../editors/vile/patches
Replaced "# defined" with "yes" in Makefile variables like GNU_CONFIGURE, NO_BUILD, USE_LIBTOOL.
2005-09-28 22:52:18 +02:00
GNU_CONFIGURE= yes
Update xvile to 9.5r. Based on patch provided by L. Schmidt in PR 36973. pkgsrc changes: share distinfo and patch with editor/vile XXXX: Should also share Makefile and PLIST. Changes from 9.5 to 9.5r: 20070603 (r) + amend makefile.in change for $(SRC) to use a translation rule that works with IRIX64 (and some broken BSD) make programs. + correct parsing/removal of "-i" option in winvile, taking into account double-quoting of parameters and also options which have parameters. + make configure --with-no-leaks work for external filters, e.g., using valgrind. + add configure script check for tdelete(), provide a replacement if not found (report by Gary Jennejohn). 20070528 (q) + change configure script to check for ispell before aspell; Fedora 5's problem with aspell was eventually fixed. + make cursor-adjustment after paste in xvile dependent on whether the pasted text ended with a newline (request by Eric Krohn). + cleanup the bottom line on the screen when exiting the curses driver, to match the termcap/terminfo driver (report by Chris Green). + fixes for pl-filt.c (perl highlighter): + allow blanks before tag for here-document, e.g., cat << 'TAG' + allow '~' as a quote-delimiter (this is used by linklint). + modify CF_IMAKE_CFLAGS to work with Solaris sed, which (unlike a standard UNIX implementation) does not honor nested subexpressions. + add rename-other-buffer command, use that to modify spell.rc so it can work with scratch buffers which otherwise would be lost, e.g., "[Help]". + add modelines for winvile.rc and w32ole.rc to set the majormode to rcmode, and modify a special case in main.c to make "vile winvile.rc" get the corresponding majormode. + add some null-pointer checks in filters for result from flt_alloc(). + add a check in flt_alloc() in case the pointer has not been allocated. + derive $(SRC) from $(OBJ) in makefile.in, to avoid losing trace.c in tags rule. + check for empty/default "put" in line.c's PutChar() to avoid attempting to remove a trailing newline from that, since the corresponding line has already been freed as part of the undo process (report by Paul Fox). + use O_NONBLOCK if O_NDELAY is undefined, needed for a few platforms which have the POSIX definition but not the legacy, e.g., Minix and OS X. + make autocolor work for curses-driver, e.g., --with-screen=ncurses (report by Chris Green). + widen the check for "winvile" in vileinit's initialization for win32 shifted cursor bind-key's. + modify spell filter so that it can get VILE_SPELL_FILT from the registry on win32. + improve spell filter camelcasing that when parsing things like "UXTerm" it splits off the "Term" as a possible word. + amend 9.5m change to check for file ownership to ensure this is only done for files that might be source'd. It was checking files for read/write too. + correct syntax highlighting for end of JavaScript embedded in HTML, which did not allow for the marker in an inline comment. + modify "filename" shown in :show-filtermsgs to use the buffer name if no filename is available. + modify preamble patterns for shell modes such as awk, etc., to allow for programs without an absolute pathname, e.g., "#! awk". + modify the symbol-table lookup in filters.c to use tsearch() when available. For an 8Mb rtf file this improved performance by about a factor of two (on Linux - Visual C++ has no tsearch). + add configure check for getc_unlocked(), putc_unlocked() and tsearch() to use in performance improvements for syntax filters. + add syntax filter for RTF files. + improve autocolor on win32 by not allowing the cursor to be repainted while autocoloring is in progress. + modify winvile's command-line parsing, adding "-i" option to perform the case used for "Send To": use the part of the command line after options as the filename and change working directory to match (request by Larry Gensch). 20070425 (p) > Tom Dickey: + modify spell- and txt-filters to allow users to add words to their respective ".keywords" files to override the builtin highlighting. + correct check of return of ffread() in spellflt.l's workaround for platforms such as win32 which have no usable popen(). That made spelling checks require two ^X-i presses. + modify spellflt.l to chop words according to Camel-case, so tokens such as "ChopWords" are treated by the spell checker as multiple words. + fix a limit check in argc/argv[] parsing for winvile (report by Larry Gensch). + modify wvwrap.exe to work with pathnames containing "$", "&" and "'". + change OPT_MULTIBYTE definition to depend on OPT_LOCALE. 20070115 (o) > Tom Dickey: + change Inno Setup script to not put version numbers on the SendTo and context-menu entries. + start adding support for UTF-8 (modes "byteorder-mark" and "file-encoding"). The byteorder-mark is workable, but the file-encoding is a stub. This works to strip the BOM from files as they are loaded, making syntax highlighting work for XML files. + correct two places in exec.c which used skip_blanks() rather than skip_space_tab() from 9.5l changes. This caused the command parser to treat ^K as a blank, breaking digraph.rc which uses that character (report by Gary Jennejohn). 20070108 (n) > Tom Dickey: + add a character-class check to find_b_file() to prevent names such as "<vile.1>" from being canonicalized into "vile.1" on win32 via FindFirstFile(). This fixes a problem where ^X-n would sometimes display the wrong buffer. + add shifted-cursor-key bindings for winvile, like xterm. + amend cursor-tokens mode so that ^X-e in a directory-buffer always uses the whole line (no regular expressions). + fix a null-pointer dereference in the cursor-tokens mode. + minor fix to sh-filt.l to handle lines like : ${BUILD_CC:='${CC}'} + improve iss-flt.l to highlight preprocessor lines. + improve winvile.iss (Inno Setup): + use values in patchlev.h to set the package version information. + add context menu and Send To shortcuts + install the keyword files + add configure --with-valgrind option. 20061212 (m) > Tom Dickey: + add showvariables mode, for testing expressions used in [Variables]. + correct comparisons used for handling bounds in regular expressions, e.g., the "2" in "\(this\|[l-m]\)\{2\}". + change behavior of regular expression OR'd alternatives - only the first match was used rather than the longest one. + fix configure script macros which omitted X_EXTRA_LIBS in one case, and repeated libs in another. + fill in complete list of event names for xres.key from Xt/TMParse.c + make ShowFormatted macro more configurable by allowing environment variables $VILE_NROFF_FILT and $VILE_TABLE_FILT to override the choice of programs therein. + disallow source'ing from the current directory if the source'd file might be writable by other users. + improve fences in vbs- and vbmode. + fix xresfilt.l; X resource files do not have embedded comments. + minor improvements/fixes to &default, to allow it to assume that '$' is implied for modes. + modify locale initialization to work with koi8rxterm. + add character classes [:ident:], [:octal:] and [:path:], and change the association of \w and \W to [:ident:], making [:alnum:] no longer include "_". + add cursor-tokens mode to control whether vile uses regular expressions, character classes or a combination to obtain tokens from the screen. + add $buf-fname-expr to show the combined bufname-expr, pathname-expr used to interpret ^X-e. + add bufname-expr, identifier-expr and pathname-expr buffer modes to provide regular expression parsing of $bufname, $identifier and $pathname in the show-variables command as well as for the related expansion of tokens from the cursor position. If the expressions are empty, the code falls through to use the corresponding older character-class parsing. Default values are provided for each *-expr mode. + fix a case where set-window might remove the only window before attempting to put a file in it. + quote "$HOME" in CF_SUBDIR_PATH, for cygwin users. 20061107 (l) > Tom Dickey: + modify ":describe-bindings" to show whether the command accepts a range, and whether it is undoable. + add ":goto-percent" function. + add (nvi/vim) ex-commands: a!, c!, i! + add ":c" as alias for ":change-til" (nvi/vim). + change unimplemented ":c" to ":co" (reference O'Reilly vi-book) + fix makefile dependency for tags + review/update use of "CNT" in describe-bindings + revised command-line option parsing to use scripting more effectively: + multiple startup files are allowed. + most command-line options are translated to their equivalent script and executed, rather than saving state for the most recent of each option. This makes the -s, -S, -g, -G options obsolete (but still accepted). + add "-c" option (the POSIX form of "+"). + modify configure script to use ncurses5-config, etc., if found when handling the --with-screen=ncurses or --with-screen=ncursesw options. It also is checked when handling the --with-ncurses option for the termcap/terminfo driver. + add suffix/name rules for "Jam" files. + fix preamble pattern for pymode so it does not match a ":" line which should be shmode. + implement patterns as line-specifiers in ex-mode. (this does not work with history-scrolling yet). + remove incorrect check for empty parameter from which-menu from 9.4m changes. + check xvile menu to ensure that "C" header is given, adding a dummy one if not (report by Chris Green). + add checks to ensure that neither modelines nor majormodes can alter these modes: all, crypt, readonly, viewonly. + implement vi-style modeline, limited to setting buffer- and window- modes, or majormodes. + add "#" as an alias for number-lines-til + improve highlighting of comment-lines (denoted by "--") in txtmode. + fixes for termcap syntax highlighter (tcmode): + allow description field to be empty + color the "|" between aliases. + improve string- and escape-parsing + fixes for terminfo syntax highlighter (timode): + allow description field to be empty + color the "|" between aliases. + allow aliases to contain blanks. 20060924 (k) > Paul van Tilburg + add syntax filter (mcrl) for mCRL/mCRL2 modeling language. > Tom Dickey: + modify fileread() to ensure that the error-buffer is reset after reading (or re-reading) a shell/pipe command, e.g., using ":e!". + fix configure --disable-largefile option (from ncurses). + minor fixes for nroff filter to improve rendition of groff's macros. + add configure check for ncurses 5.2(sic) on FreeBSD, which was broken by an incomplete set of changes to wchar.h (report by Chris Green). + add configure check for aspell, whose attempt at a compatibility script for ispell does not recognize ispell's options. + workaround for breakage in FreeBSD's header files: updates to wchar.h were not reflected in updates to curses.h (report by Chris Green). + remove reference to obsolete http://www.vile.cx from README (report by Paul Fox). + update config.guess, config.sub 20060625 (j) > Tom Dickey: + fix expression for shmode $mode-filename to match ".profile". + various small build-fixes (prompted by reports by Paul Fox, Clark Morgan). + amend 20050214 change to set_files_to_edit(), which caused partly- read buffer to be discarded if ffgetline() was interrupted, e.g., by a ^C during a slow pipe read. Now the buffer contents are retained. + update config.guess, config.sub 20060531 (i) > Tom Dickey: + fix error-reporting for a "~break" without a preceding "~while" (report by Clark Morgan). + minor fixes for tc-filt.l (termcap mode). + fix x11.c for Motif broken in 9.5f cleanup (reported by Paul Fox). + improve bas-filt.l by not highlighting incidental matches in the attribute section of a Visual Basic form-file. + correct parsing of hexadecimal constants in bas-filt.l + add .ctl suffix for vbmode + fix a case in bsizes() which subtracted line-ending from zero-sized buffer when nonewline mode was set (Debian #368007). 20060521 (h) > Clark Morgan: + document write-all-buffers command. + add echo-to-clipboard mode for Win32 hosts: all text selected with the mouse is automatically copied to the Windows clipboard. (U) > Paul Fox: + updated contact information in README, vile.1 and vile.hlp > Tom Dickey: + allow a version number in rbmode (ruby) preamble. + add check in m4-filt.c for unbalanced quote, show the affected area as an error. + add ".ddl" suffix to sqlmode. + add ".dsr" suffix to vbmode. + fix makefile.blc, broken in 9.5f cleanup. + fixes for 64-bit warnings of Visual Studio .NET 2003: + modify Member_Offset() macro to cast the difference between addresses to a long rather than casting a pointer to a long. Use this flavor for Visual C++. + size_t is not necessarily the same size as unsigned - modify code to use size_t where it is consistent, otherwise cast as needed. + updated for python keywords + modify some lex filters, e.g., sql, to exclude \r in the places that exclude \n, since \r should not be colored. + fix for tb_enquote(); a value pointed to memory that had been reallocated. + make OBJEXT configure feature work for optional objects such as api.o + updated configure macros CF_CURSES_CPPFLAGS, CF_CURSES_LIBS, CF_NCURSES_CPPFLAGS, CF_PATH_SYNTAX, CF_WITH_IMAKE_CFLAGS, CF_XOPEN_SOURCE. + update config.guess, config.sub 20060402 (g) > Tom Dickey: + minor fixes to make most of the lex filters build with "old" lex, e.g., http://heirloom.sourceforge.net/devtools.html Note: the lex-filt.l file is too complex for some older lex's. + add lua mode + save/restore curgoal variable in b2vprintf() to avoid side effects when invoking "backward-row" or "forward-row" commands (report by Chris Green). + add delphi mode + add "*.cs" files to grep macros on win32 platform + improve csmode by making the section macros look for function headers. 20060219 (f) > Clark Morgan: + update vile.hlp for %n and %N title format changes. > Tom Dickey: + fix sh-filt.l for parameter substitutions containing an escaped quote, e.g., VERSION=${VERSION#*VERSION \"} VERSION=${VERSION%\"*} + add csmode (for C# ".cs" files) and cs.key, using vile-c-filter for parsing. + modify ntwinio.c to invoke build_recent_file_and_folder_menus() in the WM_INITMENUPOPUP event rather than WM_SYSCOMMAND. This makes winvile initialize the recent-folders and recent-files if one uses a right-click on the title of the window. + change winvile's registry subkey for recent-folders and recent-files to match environment variable settings from 9.4r, e.g., change "Software\winvile\MRUFiles" to "Software\VI Like Emacs\MRUFiles" + add new symbols $return and $_ which can be used to implement simple functions (request by William James). + fix filters/makefile.2nd to allow build for gcov + improve majormodes for complex fences by initializing the (non-string) buffer mode values for submode groups according to the values in the submode. This makes ignorecase work as expected in the complex fence matching for vbmode. + add complex fences to vbmode. + minor fix to bat-filt.l to avoid highlighting ".bat" as a string in call foo.bat + change htmlfilt.l to highlight character- and URI-references as numbers to make them distinct from strings with ordinary text. + add makefile rules for installing/uninstalling files from doc directory: install-doc uninstall-doc as well as installing/uninstalling macros install-macros uninstall-macros uninstall-perl + correct logic for goto-char, broken in 9.4za (report by William James). + fix change to cpp.key in 9.5e, which put the C keywords in the wrong table. + add spell.rc to makefile.wnt install rule. + add test_io.exe rule to vmsbuild.com + add TERM.clean(), TERM.unclean(), TERM.openup() to help move diverse code out of termio.c + modify var_TITLEFORMAT() only call set_editor_title() when setting $title-format, and modify get_statevar_val() to handle some limited recursion just in case there are other cases where it could be called from the statevar.c module while retrieving a value. This fixes a bug introduced in 9.5e (report by Clark Morgan). + update title when doing a "cd", in case it uses %r substitution. + change %n in modeline substitutions to use file name (pathleaf) rather than relative path (shorten_path). Use %r for the latter. (request by Clark Morgan). + move VMS-specific code from termio.c to vmsvt.c + remove unused start_debug_log() and mallocdbg() from main.c + correct typo in ifdef for Visual Studio C++ 6.0 ifdef in w32ole.cpp from 9.5e changes. + move 9.5c check for stdout not a tty on startup to allow "vile -V" to pipe to other programs. + split-out nullterm.c + add test_io stub, to help isolate dependencies of the I/O drivers. 20060109 (e) > Clark Morgan: + improved winvile's "flash". + several changes to w32reg.c: + if at all possible, don't register ole-enabled winvile using the path ".\winvile.exe" (obscure cygwin corner case). + remove use of toUpper(), which is not legit for winvile in this context because the underlying mapping array is apparently _not_ initialized. With this fix, "winvile -Ou" now displays the editor's name in MessageBox text (rather than ""). + fixed lots of misuses of registry APIs (not properly testing return code). With fixes in place, winvile -Ou/-Or now properly reports an error when registration/unregistration is attempted by an account with insufficient privileges. + add section definitions to vbmode. + fix: wvwrap caused winvile to show an 8.3 folder name in Recent Folders list. + fix: when CD'ing to a directory stored in winvile's "recent folders" list, the cursor stayed in the mini-buffer following a call to pwd(). > Tom Dickey: + adjust makefile dependencies to allow "make -j4" when building the loadable filter configuration (report by Ciaran McCreesh). + add "+", ",", "&", "@" and ";" to URL patterns in filters. + modify nr-filt.l to allow for optional blanks between the leading "." and the command. This is common in nroff library macros, not in manpages, etc. + improve lex-filt.l, allowing for some flex extensions: + allow code in action rules to not have curly braces + allow curly-braces to surround chunks of flex actions + "*" as a state name. + add named marks for decimal digits (request by George Eccles). + fix stray ^@'s on the winvile popup menu resulting from changes to kcod2prc() for xterm-fkeys mode (report by Clark Morgan). + add a call to set_editor_title() at the end of swbuffer_lfl() to make title updates work properly with termcap configuration. + add %n and %N substitutions for $title-format (prompted by Clark Morgan comments). + modify FreeBuffer() to clear window's buffer-pointers that point to the freed buffer, e.g., to prevent reference to free memory in title updates (report by Clark Morgan). + check file descriptors in stdin_data_available() to avoid doing a fdopen() on an invalid descriptor. + add "#import" in cpp.key + modify preamble for xml- and html-modes to ensure that the first tag determines the type. + fixes to makefile.wnt and mkprlenv.wnt to work with Visual C++ 7. + correct padding of subtitle line for "Temporary variables" in [Variables] buffer, which was applied to all temporary variable lines. 20051129 (d) > Tom Dickey: + fix vl_ctype.h to avoid redefinition of UCHAR (reports by Clark Morgan, Mark Robinson). + fix lex-filt.l to build with lex (report by Dave Rolfe). + fix include-path in makefile.wnt, makefile.djg makefile.icc to work with split-out headers for regexp.c + remove code for DISP_IBMPC + remove makefile.emx and config.emx (obsolete). + remove makefile.wat and makefile.tbc, since they used ibmpc.c 20051123 (c) > Clark Morgan: + remove an obsolete comment in macros.doc regarding underscore in macro names. > Paul Fox: + correct logic for check_percent_crlf(), ensuring that empty buffers are not counted as having CRLF endings. > Tom Dickey: + fix to_tabstop() function used for :describe-bindings to ensure that a binding that happens to be 8 columns will still have a tab after it. + add a fflush() to ensure that the control string to reset xterm mouse mode is written during ^Z handling (report by Fabien Coutant). + add a call to term.kopen() in rtfrmshell(), making ^Z/resume work properly with the curses driver (report by Fabien Coutant). + make mouse work for curses driver just like the termcap/terminfo driver. + split xterm-specific code out of tcap.c as xterm.c, to share with curses.c + indent'd borland.c + remove ibmpc.c (obsolete) + check if stdout is not a tty on startup, print error message and exit (request by Paul Fox). + add mode xterm-fkeys, to allow termcap driver to generate shift/control/alt modifiers for function keys. + modify regexp.c so tab is not matched by \p or [[:print:]] for consistency with POSIX regular expressions. + modified regexp.c, add headers vl_regex.h, vl_alloc.h and vl_ctype.h to allow it to be easily built outside vile (request by Adrian Kole). + add KEY_BackTab to the output of show-key-names + fix kcod2prc() so that a shifted-tab is converted to "Shift+^I" rather than emitting a literal tab in the result. + update vilemenu.rc fonts to work on Debian/testing. + improve scrollbar/cursor tracking in winvile by calling gui_update_scrollbar() when WFMOVE flag is set (report by Deraj Puma). + add a simple csvmode for ".csv" files. + add ".ebuild" suffix for shmode. + improve mode-pathname for xresmode to handle things like KOI8Term. 20051002 (b) > Tom Dickey: + update config.guess, config.sub + improve os2vio.c, adding a check to distinguish between fullscreen and VIO to allow using bright background colors in the latter (report by George Eccles). + add KEY_xxx definitions to OS/2 and Win32 drivers, defining up to KEY_F35 for the former and KEY_F24 for the latter (report by George Eccles). + several improvements and fixes to lex-filt.l + expressions for regular expression parsing are more complete, which allows separating patterns from state lists. That allows some error-checking in the rules section to flag spurious whitespace after a regular expression. The more-complete regular expressions make the parser much larger (about 5 times the original size). A rewrite in C might be shorter. + ignore case of "%s" vs "%S" or "%state", etc. + parse the pattern names, applying highlighting to the names where they are embedded in regular expressions. + parse the "%s" (state) lists, applying highlighting to the states. + handle flex's <<EOF>> token. + handle character classes in the RANGE pattern. + remove an update() call from the logic in input.c which decodes hex/octal input after a ^V. That caused the screen to move the view according to the address in the command, e.g., :%s/^Vx12 would scroll to the bottom on entry of the "x" (report by Daniel L Ashbrook). + correct behavior of set-dos command, which did not recompute the buffer-size. + make end-of-token test for store-proc consistent with bind-key, i.e., alphanumerics and hyphen. Amend that test to allow underscore (report by George Eccles). 20050905 (a) > Tom Dickey: + review/improve vl-filt.l based on Verilog LRM draft + add configure check for lex's which support character classes, and add filters/noclass.sh to work around those which do not. + improvements to configure script from ncurses: + improve check for Intel compiler warnings + improve check for gcc version + define _QNX_SOURCE for QNX + revert part of 9.4n, which caused readin() to return false if there was no filename associated with the buffer. Doing this broke some macros such as which-keywords (using buffer constructed by the macro). Previously it returned true, indicating success. + improve parsing of range expressions in lex-filt.l, fixes a case exposed by css-filt.l + correct a case where slowread() in dosmode would compute a correct buffer size. + modify bat-filt.l to highlight "echo." consistently with M$ usage. + modify bat-filt.l to highlight "%*". + add syntax filters for bnf, css, midl, php and wbt (WinBatch). + modify syntax filters to use flex's character classes
2007-10-14 08:33:17 +02:00
CONFIGURE_ARGS+= --disable-imake
Add PERL_POLLUTE to compile correctly with perl>=5.6.0 until source catches up with latest perl API. While here, modify the builds so that vile and xvile don't conflict when xpkgwedge is installed. Fixes pkg/10947 by Matthias Scheler <tron@lyssa.zhadum.de>.
2000-09-06 10:16:14 +02:00
CONFIGURE_ARGS+= --with-perl
Ran "pkglint --autofix", which corrected some of the quoting issues in CONFIGURE_ARGS.
2005-12-06 00:55:01 +01:00
CONFIGURE_ARGS+= --datadir=${DATADIR:Q}
CONFIGURE_ARGS+= --with-libdir-path=${FILTERDIR:Q}
Add PERL_POLLUTE to compile correctly with perl>=5.6.0 until source catches up with latest perl API. While here, modify the builds so that vile and xvile don't conflict when xpkgwedge is installed. Fixes pkg/10947 by Matthias Scheler <tron@lyssa.zhadum.de>.
2000-09-06 10:16:14 +02:00
Rename variable MAKEFILE to MAKE_FILE.
2006-09-09 04:41:53 +02:00
MAKE_FILE= makefile
Update xvile to 9.5r. Based on patch provided by L. Schmidt in PR 36973. pkgsrc changes: share distinfo and patch with editor/vile XXXX: Should also share Makefile and PLIST. Changes from 9.5 to 9.5r: 20070603 (r) + amend makefile.in change for $(SRC) to use a translation rule that works with IRIX64 (and some broken BSD) make programs. + correct parsing/removal of "-i" option in winvile, taking into account double-quoting of parameters and also options which have parameters. + make configure --with-no-leaks work for external filters, e.g., using valgrind. + add configure script check for tdelete(), provide a replacement if not found (report by Gary Jennejohn). 20070528 (q) + change configure script to check for ispell before aspell; Fedora 5's problem with aspell was eventually fixed. + make cursor-adjustment after paste in xvile dependent on whether the pasted text ended with a newline (request by Eric Krohn). + cleanup the bottom line on the screen when exiting the curses driver, to match the termcap/terminfo driver (report by Chris Green). + fixes for pl-filt.c (perl highlighter): + allow blanks before tag for here-document, e.g., cat << 'TAG' + allow '~' as a quote-delimiter (this is used by linklint). + modify CF_IMAKE_CFLAGS to work with Solaris sed, which (unlike a standard UNIX implementation) does not honor nested subexpressions. + add rename-other-buffer command, use that to modify spell.rc so it can work with scratch buffers which otherwise would be lost, e.g., "[Help]". + add modelines for winvile.rc and w32ole.rc to set the majormode to rcmode, and modify a special case in main.c to make "vile winvile.rc" get the corresponding majormode. + add some null-pointer checks in filters for result from flt_alloc(). + add a check in flt_alloc() in case the pointer has not been allocated. + derive $(SRC) from $(OBJ) in makefile.in, to avoid losing trace.c in tags rule. + check for empty/default "put" in line.c's PutChar() to avoid attempting to remove a trailing newline from that, since the corresponding line has already been freed as part of the undo process (report by Paul Fox). + use O_NONBLOCK if O_NDELAY is undefined, needed for a few platforms which have the POSIX definition but not the legacy, e.g., Minix and OS X. + make autocolor work for curses-driver, e.g., --with-screen=ncurses (report by Chris Green). + widen the check for "winvile" in vileinit's initialization for win32 shifted cursor bind-key's. + modify spell filter so that it can get VILE_SPELL_FILT from the registry on win32. + improve spell filter camelcasing that when parsing things like "UXTerm" it splits off the "Term" as a possible word. + amend 9.5m change to check for file ownership to ensure this is only done for files that might be source'd. It was checking files for read/write too. + correct syntax highlighting for end of JavaScript embedded in HTML, which did not allow for the marker in an inline comment. + modify "filename" shown in :show-filtermsgs to use the buffer name if no filename is available. + modify preamble patterns for shell modes such as awk, etc., to allow for programs without an absolute pathname, e.g., "#! awk". + modify the symbol-table lookup in filters.c to use tsearch() when available. For an 8Mb rtf file this improved performance by about a factor of two (on Linux - Visual C++ has no tsearch). + add configure check for getc_unlocked(), putc_unlocked() and tsearch() to use in performance improvements for syntax filters. + add syntax filter for RTF files. + improve autocolor on win32 by not allowing the cursor to be repainted while autocoloring is in progress. + modify winvile's command-line parsing, adding "-i" option to perform the case used for "Send To": use the part of the command line after options as the filename and change working directory to match (request by Larry Gensch). 20070425 (p) > Tom Dickey: + modify spell- and txt-filters to allow users to add words to their respective ".keywords" files to override the builtin highlighting. + correct check of return of ffread() in spellflt.l's workaround for platforms such as win32 which have no usable popen(). That made spelling checks require two ^X-i presses. + modify spellflt.l to chop words according to Camel-case, so tokens such as "ChopWords" are treated by the spell checker as multiple words. + fix a limit check in argc/argv[] parsing for winvile (report by Larry Gensch). + modify wvwrap.exe to work with pathnames containing "$", "&" and "'". + change OPT_MULTIBYTE definition to depend on OPT_LOCALE. 20070115 (o) > Tom Dickey: + change Inno Setup script to not put version numbers on the SendTo and context-menu entries. + start adding support for UTF-8 (modes "byteorder-mark" and "file-encoding"). The byteorder-mark is workable, but the file-encoding is a stub. This works to strip the BOM from files as they are loaded, making syntax highlighting work for XML files. + correct two places in exec.c which used skip_blanks() rather than skip_space_tab() from 9.5l changes. This caused the command parser to treat ^K as a blank, breaking digraph.rc which uses that character (report by Gary Jennejohn). 20070108 (n) > Tom Dickey: + add a character-class check to find_b_file() to prevent names such as "<vile.1>" from being canonicalized into "vile.1" on win32 via FindFirstFile(). This fixes a problem where ^X-n would sometimes display the wrong buffer. + add shifted-cursor-key bindings for winvile, like xterm. + amend cursor-tokens mode so that ^X-e in a directory-buffer always uses the whole line (no regular expressions). + fix a null-pointer dereference in the cursor-tokens mode. + minor fix to sh-filt.l to handle lines like : ${BUILD_CC:='${CC}'} + improve iss-flt.l to highlight preprocessor lines. + improve winvile.iss (Inno Setup): + use values in patchlev.h to set the package version information. + add context menu and Send To shortcuts + install the keyword files + add configure --with-valgrind option. 20061212 (m) > Tom Dickey: + add showvariables mode, for testing expressions used in [Variables]. + correct comparisons used for handling bounds in regular expressions, e.g., the "2" in "\(this\|[l-m]\)\{2\}". + change behavior of regular expression OR'd alternatives - only the first match was used rather than the longest one. + fix configure script macros which omitted X_EXTRA_LIBS in one case, and repeated libs in another. + fill in complete list of event names for xres.key from Xt/TMParse.c + make ShowFormatted macro more configurable by allowing environment variables $VILE_NROFF_FILT and $VILE_TABLE_FILT to override the choice of programs therein. + disallow source'ing from the current directory if the source'd file might be writable by other users. + improve fences in vbs- and vbmode. + fix xresfilt.l; X resource files do not have embedded comments. + minor improvements/fixes to &default, to allow it to assume that '$' is implied for modes. + modify locale initialization to work with koi8rxterm. + add character classes [:ident:], [:octal:] and [:path:], and change the association of \w and \W to [:ident:], making [:alnum:] no longer include "_". + add cursor-tokens mode to control whether vile uses regular expressions, character classes or a combination to obtain tokens from the screen. + add $buf-fname-expr to show the combined bufname-expr, pathname-expr used to interpret ^X-e. + add bufname-expr, identifier-expr and pathname-expr buffer modes to provide regular expression parsing of $bufname, $identifier and $pathname in the show-variables command as well as for the related expansion of tokens from the cursor position. If the expressions are empty, the code falls through to use the corresponding older character-class parsing. Default values are provided for each *-expr mode. + fix a case where set-window might remove the only window before attempting to put a file in it. + quote "$HOME" in CF_SUBDIR_PATH, for cygwin users. 20061107 (l) > Tom Dickey: + modify ":describe-bindings" to show whether the command accepts a range, and whether it is undoable. + add ":goto-percent" function. + add (nvi/vim) ex-commands: a!, c!, i! + add ":c" as alias for ":change-til" (nvi/vim). + change unimplemented ":c" to ":co" (reference O'Reilly vi-book) + fix makefile dependency for tags + review/update use of "CNT" in describe-bindings + revised command-line option parsing to use scripting more effectively: + multiple startup files are allowed. + most command-line options are translated to their equivalent script and executed, rather than saving state for the most recent of each option. This makes the -s, -S, -g, -G options obsolete (but still accepted). + add "-c" option (the POSIX form of "+"). + modify configure script to use ncurses5-config, etc., if found when handling the --with-screen=ncurses or --with-screen=ncursesw options. It also is checked when handling the --with-ncurses option for the termcap/terminfo driver. + add suffix/name rules for "Jam" files. + fix preamble pattern for pymode so it does not match a ":" line which should be shmode. + implement patterns as line-specifiers in ex-mode. (this does not work with history-scrolling yet). + remove incorrect check for empty parameter from which-menu from 9.4m changes. + check xvile menu to ensure that "C" header is given, adding a dummy one if not (report by Chris Green). + add checks to ensure that neither modelines nor majormodes can alter these modes: all, crypt, readonly, viewonly. + implement vi-style modeline, limited to setting buffer- and window- modes, or majormodes. + add "#" as an alias for number-lines-til + improve highlighting of comment-lines (denoted by "--") in txtmode. + fixes for termcap syntax highlighter (tcmode): + allow description field to be empty + color the "|" between aliases. + improve string- and escape-parsing + fixes for terminfo syntax highlighter (timode): + allow description field to be empty + color the "|" between aliases. + allow aliases to contain blanks. 20060924 (k) > Paul van Tilburg + add syntax filter (mcrl) for mCRL/mCRL2 modeling language. > Tom Dickey: + modify fileread() to ensure that the error-buffer is reset after reading (or re-reading) a shell/pipe command, e.g., using ":e!". + fix configure --disable-largefile option (from ncurses). + minor fixes for nroff filter to improve rendition of groff's macros. + add configure check for ncurses 5.2(sic) on FreeBSD, which was broken by an incomplete set of changes to wchar.h (report by Chris Green). + add configure check for aspell, whose attempt at a compatibility script for ispell does not recognize ispell's options. + workaround for breakage in FreeBSD's header files: updates to wchar.h were not reflected in updates to curses.h (report by Chris Green). + remove reference to obsolete http://www.vile.cx from README (report by Paul Fox). + update config.guess, config.sub 20060625 (j) > Tom Dickey: + fix expression for shmode $mode-filename to match ".profile". + various small build-fixes (prompted by reports by Paul Fox, Clark Morgan). + amend 20050214 change to set_files_to_edit(), which caused partly- read buffer to be discarded if ffgetline() was interrupted, e.g., by a ^C during a slow pipe read. Now the buffer contents are retained. + update config.guess, config.sub 20060531 (i) > Tom Dickey: + fix error-reporting for a "~break" without a preceding "~while" (report by Clark Morgan). + minor fixes for tc-filt.l (termcap mode). + fix x11.c for Motif broken in 9.5f cleanup (reported by Paul Fox). + improve bas-filt.l by not highlighting incidental matches in the attribute section of a Visual Basic form-file. + correct parsing of hexadecimal constants in bas-filt.l + add .ctl suffix for vbmode + fix a case in bsizes() which subtracted line-ending from zero-sized buffer when nonewline mode was set (Debian #368007). 20060521 (h) > Clark Morgan: + document write-all-buffers command. + add echo-to-clipboard mode for Win32 hosts: all text selected with the mouse is automatically copied to the Windows clipboard. (U) > Paul Fox: + updated contact information in README, vile.1 and vile.hlp > Tom Dickey: + allow a version number in rbmode (ruby) preamble. + add check in m4-filt.c for unbalanced quote, show the affected area as an error. + add ".ddl" suffix to sqlmode. + add ".dsr" suffix to vbmode. + fix makefile.blc, broken in 9.5f cleanup. + fixes for 64-bit warnings of Visual Studio .NET 2003: + modify Member_Offset() macro to cast the difference between addresses to a long rather than casting a pointer to a long. Use this flavor for Visual C++. + size_t is not necessarily the same size as unsigned - modify code to use size_t where it is consistent, otherwise cast as needed. + updated for python keywords + modify some lex filters, e.g., sql, to exclude \r in the places that exclude \n, since \r should not be colored. + fix for tb_enquote(); a value pointed to memory that had been reallocated. + make OBJEXT configure feature work for optional objects such as api.o + updated configure macros CF_CURSES_CPPFLAGS, CF_CURSES_LIBS, CF_NCURSES_CPPFLAGS, CF_PATH_SYNTAX, CF_WITH_IMAKE_CFLAGS, CF_XOPEN_SOURCE. + update config.guess, config.sub 20060402 (g) > Tom Dickey: + minor fixes to make most of the lex filters build with "old" lex, e.g., http://heirloom.sourceforge.net/devtools.html Note: the lex-filt.l file is too complex for some older lex's. + add lua mode + save/restore curgoal variable in b2vprintf() to avoid side effects when invoking "backward-row" or "forward-row" commands (report by Chris Green). + add delphi mode + add "*.cs" files to grep macros on win32 platform + improve csmode by making the section macros look for function headers. 20060219 (f) > Clark Morgan: + update vile.hlp for %n and %N title format changes. > Tom Dickey: + fix sh-filt.l for parameter substitutions containing an escaped quote, e.g., VERSION=${VERSION#*VERSION \"} VERSION=${VERSION%\"*} + add csmode (for C# ".cs" files) and cs.key, using vile-c-filter for parsing. + modify ntwinio.c to invoke build_recent_file_and_folder_menus() in the WM_INITMENUPOPUP event rather than WM_SYSCOMMAND. This makes winvile initialize the recent-folders and recent-files if one uses a right-click on the title of the window. + change winvile's registry subkey for recent-folders and recent-files to match environment variable settings from 9.4r, e.g., change "Software\winvile\MRUFiles" to "Software\VI Like Emacs\MRUFiles" + add new symbols $return and $_ which can be used to implement simple functions (request by William James). + fix filters/makefile.2nd to allow build for gcov + improve majormodes for complex fences by initializing the (non-string) buffer mode values for submode groups according to the values in the submode. This makes ignorecase work as expected in the complex fence matching for vbmode. + add complex fences to vbmode. + minor fix to bat-filt.l to avoid highlighting ".bat" as a string in call foo.bat + change htmlfilt.l to highlight character- and URI-references as numbers to make them distinct from strings with ordinary text. + add makefile rules for installing/uninstalling files from doc directory: install-doc uninstall-doc as well as installing/uninstalling macros install-macros uninstall-macros uninstall-perl + correct logic for goto-char, broken in 9.4za (report by William James). + fix change to cpp.key in 9.5e, which put the C keywords in the wrong table. + add spell.rc to makefile.wnt install rule. + add test_io.exe rule to vmsbuild.com + add TERM.clean(), TERM.unclean(), TERM.openup() to help move diverse code out of termio.c + modify var_TITLEFORMAT() only call set_editor_title() when setting $title-format, and modify get_statevar_val() to handle some limited recursion just in case there are other cases where it could be called from the statevar.c module while retrieving a value. This fixes a bug introduced in 9.5e (report by Clark Morgan). + update title when doing a "cd", in case it uses %r substitution. + change %n in modeline substitutions to use file name (pathleaf) rather than relative path (shorten_path). Use %r for the latter. (request by Clark Morgan). + move VMS-specific code from termio.c to vmsvt.c + remove unused start_debug_log() and mallocdbg() from main.c + correct typo in ifdef for Visual Studio C++ 6.0 ifdef in w32ole.cpp from 9.5e changes. + move 9.5c check for stdout not a tty on startup to allow "vile -V" to pipe to other programs. + split-out nullterm.c + add test_io stub, to help isolate dependencies of the I/O drivers. 20060109 (e) > Clark Morgan: + improved winvile's "flash". + several changes to w32reg.c: + if at all possible, don't register ole-enabled winvile using the path ".\winvile.exe" (obscure cygwin corner case). + remove use of toUpper(), which is not legit for winvile in this context because the underlying mapping array is apparently _not_ initialized. With this fix, "winvile -Ou" now displays the editor's name in MessageBox text (rather than ""). + fixed lots of misuses of registry APIs (not properly testing return code). With fixes in place, winvile -Ou/-Or now properly reports an error when registration/unregistration is attempted by an account with insufficient privileges. + add section definitions to vbmode. + fix: wvwrap caused winvile to show an 8.3 folder name in Recent Folders list. + fix: when CD'ing to a directory stored in winvile's "recent folders" list, the cursor stayed in the mini-buffer following a call to pwd(). > Tom Dickey: + adjust makefile dependencies to allow "make -j4" when building the loadable filter configuration (report by Ciaran McCreesh). + add "+", ",", "&", "@" and ";" to URL patterns in filters. + modify nr-filt.l to allow for optional blanks between the leading "." and the command. This is common in nroff library macros, not in manpages, etc. + improve lex-filt.l, allowing for some flex extensions: + allow code in action rules to not have curly braces + allow curly-braces to surround chunks of flex actions + "*" as a state name. + add named marks for decimal digits (request by George Eccles). + fix stray ^@'s on the winvile popup menu resulting from changes to kcod2prc() for xterm-fkeys mode (report by Clark Morgan). + add a call to set_editor_title() at the end of swbuffer_lfl() to make title updates work properly with termcap configuration. + add %n and %N substitutions for $title-format (prompted by Clark Morgan comments). + modify FreeBuffer() to clear window's buffer-pointers that point to the freed buffer, e.g., to prevent reference to free memory in title updates (report by Clark Morgan). + check file descriptors in stdin_data_available() to avoid doing a fdopen() on an invalid descriptor. + add "#import" in cpp.key + modify preamble for xml- and html-modes to ensure that the first tag determines the type. + fixes to makefile.wnt and mkprlenv.wnt to work with Visual C++ 7. + correct padding of subtitle line for "Temporary variables" in [Variables] buffer, which was applied to all temporary variable lines. 20051129 (d) > Tom Dickey: + fix vl_ctype.h to avoid redefinition of UCHAR (reports by Clark Morgan, Mark Robinson). + fix lex-filt.l to build with lex (report by Dave Rolfe). + fix include-path in makefile.wnt, makefile.djg makefile.icc to work with split-out headers for regexp.c + remove code for DISP_IBMPC + remove makefile.emx and config.emx (obsolete). + remove makefile.wat and makefile.tbc, since they used ibmpc.c 20051123 (c) > Clark Morgan: + remove an obsolete comment in macros.doc regarding underscore in macro names. > Paul Fox: + correct logic for check_percent_crlf(), ensuring that empty buffers are not counted as having CRLF endings. > Tom Dickey: + fix to_tabstop() function used for :describe-bindings to ensure that a binding that happens to be 8 columns will still have a tab after it. + add a fflush() to ensure that the control string to reset xterm mouse mode is written during ^Z handling (report by Fabien Coutant). + add a call to term.kopen() in rtfrmshell(), making ^Z/resume work properly with the curses driver (report by Fabien Coutant). + make mouse work for curses driver just like the termcap/terminfo driver. + split xterm-specific code out of tcap.c as xterm.c, to share with curses.c + indent'd borland.c + remove ibmpc.c (obsolete) + check if stdout is not a tty on startup, print error message and exit (request by Paul Fox). + add mode xterm-fkeys, to allow termcap driver to generate shift/control/alt modifiers for function keys. + modify regexp.c so tab is not matched by \p or [[:print:]] for consistency with POSIX regular expressions. + modified regexp.c, add headers vl_regex.h, vl_alloc.h and vl_ctype.h to allow it to be easily built outside vile (request by Adrian Kole). + add KEY_BackTab to the output of show-key-names + fix kcod2prc() so that a shifted-tab is converted to "Shift+^I" rather than emitting a literal tab in the result. + update vilemenu.rc fonts to work on Debian/testing. + improve scrollbar/cursor tracking in winvile by calling gui_update_scrollbar() when WFMOVE flag is set (report by Deraj Puma). + add a simple csvmode for ".csv" files. + add ".ebuild" suffix for shmode. + improve mode-pathname for xresmode to handle things like KOI8Term. 20051002 (b) > Tom Dickey: + update config.guess, config.sub + improve os2vio.c, adding a check to distinguish between fullscreen and VIO to allow using bright background colors in the latter (report by George Eccles). + add KEY_xxx definitions to OS/2 and Win32 drivers, defining up to KEY_F35 for the former and KEY_F24 for the latter (report by George Eccles). + several improvements and fixes to lex-filt.l + expressions for regular expression parsing are more complete, which allows separating patterns from state lists. That allows some error-checking in the rules section to flag spurious whitespace after a regular expression. The more-complete regular expressions make the parser much larger (about 5 times the original size). A rewrite in C might be shorter. + ignore case of "%s" vs "%S" or "%state", etc. + parse the pattern names, applying highlighting to the names where they are embedded in regular expressions. + parse the "%s" (state) lists, applying highlighting to the states. + handle flex's <<EOF>> token. + handle character classes in the RANGE pattern. + remove an update() call from the logic in input.c which decodes hex/octal input after a ^V. That caused the screen to move the view according to the address in the command, e.g., :%s/^Vx12 would scroll to the bottom on entry of the "x" (report by Daniel L Ashbrook). + correct behavior of set-dos command, which did not recompute the buffer-size. + make end-of-token test for store-proc consistent with bind-key, i.e., alphanumerics and hyphen. Amend that test to allow underscore (report by George Eccles). 20050905 (a) > Tom Dickey: + review/improve vl-filt.l based on Verilog LRM draft + add configure check for lex's which support character classes, and add filters/noclass.sh to work around those which do not. + improvements to configure script from ncurses: + improve check for Intel compiler warnings + improve check for gcc version + define _QNX_SOURCE for QNX + revert part of 9.4n, which caused readin() to return false if there was no filename associated with the buffer. Doing this broke some macros such as which-keywords (using buffer constructed by the macro). Previously it returned true, indicating success. + improve parsing of range expressions in lex-filt.l, fixes a case exposed by css-filt.l + correct a case where slowread() in dosmode would compute a correct buffer size. + modify bat-filt.l to highlight "echo." consistently with M$ usage. + modify bat-filt.l to highlight "%*". + add syntax filters for bnf, css, midl, php and wbt (WinBatch). + modify syntax filters to use flex's character classes
2007-10-14 08:33:17 +02:00
INSTALL_TARGET= install install-doc install-perl
Add PERL_POLLUTE to compile correctly with perl>=5.6.0 until source catches up with latest perl API. While here, modify the builds so that vile and xvile don't conflict when xpkgwedge is installed. Fixes pkg/10947 by Matthias Scheler <tron@lyssa.zhadum.de>.
2000-09-06 10:16:14 +02:00
Fix path to Perl and actually depend on it. Bump revision.
2007-07-28 02:13:05 +02:00
REPLACE_PERL= perl/vileget
editors/xvile: Update from version 9.7 to 9.8 This package uses the distinfo and patches from editors/vile which was recently updated to version 9.8. Unfortunately it doesn't use a common makefile so there was a version mismatch. In the end, it didn't matter because the PLIST had to be significantly modified as well. These patches move xvile to version 9,8 and fixes build on DragonFly as a side benefit.
2012-08-07 11:42:35 +02:00
REPLACE_PERL+= macros/lxvile
REPLACE_PERL+= macros/lxvile-fonts
Fix path to Perl and actually depend on it. Bump revision.
2007-07-28 02:13:05 +02:00
USE_TOOLS+= perl:run
Add PERL_POLLUTE to compile correctly with perl>=5.6.0 until source catches up with latest perl API. While here, modify the builds so that vile and xvile don't conflict when xpkgwedge is installed. Fixes pkg/10947 by Matthias Scheler <tron@lyssa.zhadum.de>.
2000-09-06 10:16:14 +02:00
DATADIR= ${PREFIX}/share/xvile
FILTERDIR= ${PREFIX}/libexec/xvile
EGDIR= ${PREFIX}/share/examples/xvile
Initial import of FreeBSD's editors ports into the NetBSD packages system.
1997-10-06 14:41:48 +02:00
Respect the XAW_TYPE setting and actually link in correct libraries if XAW_TYPE == 3d.
2000-09-06 17:02:09 +02:00
.include "../../mk/bsd.prefs.mk"
Move per-package default XAW_TYPE setting above the inclusion of bsd.prefs.mk so that it is actually used. Where possible, include xaw.buildlink.mk instead of setting USE_XAW, and use LIBXAW where needed.
2001-08-23 06:26:51 +02:00
.if defined(XAW_TYPE) && (${XAW_TYPE} == "3d" || ${XAW_TYPE} == "xpm")
Respect the XAW_TYPE setting and actually link in correct libraries if XAW_TYPE == 3d.
2000-09-06 17:02:09 +02:00
CONFIGURE_ARGS+= --with-screen=Xaw3d
CONFIGURE_ARGS+= --with-Xaw3d
.else
CONFIGURE_ARGS+= --with-screen=Xaw
.endif
CONFIGURE_ARGS+= --with-xpm
Initial import of FreeBSD's editors ports into the NetBSD packages system.
1997-10-06 14:41:48 +02:00
post-install:
Update to vile-9.7. This is a bug-fix release with some minor feature improvements (remove obsolete filters, improve ruby filter, improved syntax highlighting, some locale/encoding fixes, etc.) In pkgsrc, add DESTDIR support to xvile. While here, include libXt and libXmu so that xvile will build if XAW_TYPE=xpm.
2008-09-09 12:14:30 +02:00
${INSTALL_SCRIPT} ${WRKSRC}/perl/vileget \
${DESTDIR}${PREFIX}/bin/xvileget
${INSTALL_DATA_DIR} ${DESTDIR}${EGDIR}
set -e; \
for f in filters/spell.rc filters/filters.rc \
macros/digraphs.rc macros/pictmode.rc \
macros/manpage.rc visvile/visvile.rc; do \
${INSTALL_DATA} ${WRKSRC}/$$f ${DESTDIR}${EGDIR}; \
Rather than advising users to look at example .rc files before the ${WRKDIR} is deleted, install said files to ${PREFIX}/share/examples/xvile
1999-10-22 15:45:18 +02:00
done
Initial import of FreeBSD's editors ports into the NetBSD packages system.
1997-10-06 14:41:48 +02:00
Update to vile-9.7. This is a bug-fix release with some minor feature improvements (remove obsolete filters, improve ruby filter, improved syntax highlighting, some locale/encoding fixes, etc.) In pkgsrc, add DESTDIR support to xvile. While here, include libXt and libXmu so that xvile will build if XAW_TYPE=xpm.
2008-09-09 12:14:30 +02:00
.include "../../x11/libXmu/buildlink3.mk"
Mechanically replace all includes of buildlink3.mk of the following packages with the modular Xorg equivalent. Those are falling back to the old location by default, so this commmit doesn't change dependencies. graphics/xpm ==> x11/libXpm fonts/Xft2 ==> x11/libXft x11/Xfixes ==> x11/libXfixes x11/xcursor ==> x11/libXcursor x11/Xrender ==> x11/libXrender x11/Xrandr ==> libXrandr
2006-12-15 21:32:52 +01:00
.include "../../x11/libXpm/buildlink3.mk"
Include perl5/buildlink3.mk to use libperl.
2005-09-17 19:06:19 +02:00
.include "../../lang/perl5/buildlink3.mk"
bl3ify
2004-04-12 17:17:09 +02:00
.include "../../mk/xaw.buildlink3.mk"
buildlink1 -> buildlink2
2002-10-08 15:37:17 +02:00
Use the bsd.pkg.mk and bsd.pkg.subdir.mk files in the pkgsrc tree. Remove redundant (and sometimes erroneous) comments.
1998-04-15 12:38:15 +02:00
.include "../../mk/bsd.pkg.mk"
Reference in a new issue Copy permalink