2021-01-24 20:06:10 +01:00
|
|
|
# $NetBSD: Makefile,v 1.34 2021/01/24 19:06:10 gdt Exp $
|
2008-03-04 12:30:08 +01:00
|
|
|
#
|
|
|
|
|
|
2021-01-24 20:06:10 +01:00
|
|
|
DISTNAME= ccid-1.4.34
|
2008-03-04 12:30:08 +01:00
|
|
|
CATEGORIES= security
|
2020-08-19 16:53:37 +02:00
|
|
|
MASTER_SITES= https://ccid.apdu.fr/files/
|
2008-08-08 23:27:24 +02:00
|
|
|
EXTRACT_SUFX= .tar.bz2
|
2008-03-04 12:30:08 +01:00
|
|
|
|
2014-02-26 02:16:56 +01:00
|
|
|
MAINTAINER= gdt@NetBSD.org
|
2020-08-19 16:53:37 +02:00
|
|
|
HOMEPAGE= https://ccid.apdu.fr/
|
2008-03-04 12:30:08 +01:00
|
|
|
COMMENT= Middleware to access a smart card using SCard API (PC/SC)
|
A major version bump gives a long changelog...
1.4.5:
- Add support of Alcor Micro AU9540, Ubisys 13.56MHz RFID (CCID),
BIFIT USB-Token iBank2key, BIFIT iBank2Key, Gemalto Ezio Shield
PinPad reader, Gemalto SA .NET Dual, Precise Sense MC reader (with
fingerprint), SDS DOMINO-Key TWIN Pro
- Add support of bPPDUSupport and FEATURE_CCID_ESC_COMMAND
- SCARD_ATTR_VENDOR_NAME and SCARD_ATTR_VENDOR_IFD_VERSION are not
the vendor name and version of the driver but of the IFD:
InterFace Device i.e. the smart card reader. We then return the
USB iManufacturer string as SCARD_ATTR_VENDOR_NAME and USB
bcdDevice as SCARD_ATTR_VENDOR_IFD_VERSION
- reduce binary size bu removing unused features from simclist
- Fix some warnings reported bu Coverity
1.4.4:
- Add support of Gemalto Ezio Shield, Gemalto Ezio CB+, Gemalto Ezio
Shield Secure Channel, Gemalto Ezio Shield PinPad and Gemalto Ezio
Generic
- Activate USB automatic power suspend. The Linux kernel should
power off the reader automatically if it is not used (pcscd is not
running).
- Add support of TLV Properties wLcdMaxCharacters and wLcdMaxLines.
They just duplicate wLcdLayout
- some minor bugs removed
1.4.3:
- Add support of Neowave Weneo, Vasco DIGIPASS 920, SCM SCL011,
Feitian ePass2003 readers
- use :libudev: instead of :libhal: naming scheme.
- Do not install RSA_SecurID_getpasswd and Kobil_mIDentity_switch
and the associated documentation.
- the Secure Pin Entry of the HP USB Smart Card Keyboard is bogus so
disable it
- some minor bugs removed
1.4.2:
- Add support of Feitian SCR310 reader (also known as 301v2), ACS
APG8201 PINhandy 1, Oberthur ID-ONE TOKEN SLIM v2, new Neowave
Weneo token, Vasco DIGIPASS KEY 860, Vasco DIGIPASS KEY 200,
Xiring Leo v2, Xiring MyLeo, Aktiv Rutoken lite readers
- Add back support of "bogus" Oz776, REINER SCT and BLUDRIVE II
- Ease detection of OpenCT by pcsc-lite
- disable use of interrupt card events for multi slots readers (the
algorithm is bogus and can't be used)
- fix minor problems detected by the clang tool
- some minor bugs removed
1.4.1:
- Add support of Gemalto Smart Guardian (SG CCID), ReinerSCT
cyberJack RFID basis, Akasa AK-CR-03, BZH uKeyCI800-K18, Free
Software Initiative of Japan Gnuk token readers
- Remove O2 Micro Oz776 and Blutronics Bludrive II CCID since they
are no more supported since version 1.4.0
- SecurePINVerify() & SecurePINModify(): Accept big and little
endian byte orders for multibytes fields. The application
should not use HOST_TO_CCID_16() and HOST_TO_CCID_32() any more
and just use the normal byte order of the architecture.
- Need pcsc-lite 1.6.5 for TAG_IFD_POLLING_THREAD_WITH_TIMEOUT
- Add --enable-embedded (default is no) to build libccid for an
embedded system. This will activate the NO_LOG option to disable
logging and limit RAM and disk consumption.
- Remove --enable-udev option since it is not used anymore with
libhal. The udev rules file is now used to change the access
rights of the device and not send a hotplug signal to pcscd.
See http://ludovicrousseau.blogspot.com/2010/09/pcscd-auto-start.html
- some minor bugs removed
1.4.0:
- add support of Kingtrust Multi-Reader, Dectel CI692, Todos CX00,
C3PO LTC36, ACS AET65, Broadcom 5880, Tianyu Smart Card Reader,
Gemalto Hybrid Smartcard Reader
- Add support of the SCM SDI 010 again. At least the contact
interface can be used.
- Use libusb-1.0 instead of libusb-0.1
- add support of TAG_IFD_STOP_POLLING_THREAD and use of the
asynchronous libusb API to be able to stop a transfer.
- Request pcsc-lite 1.6.2 minimum (instead of 1.6.0) to have
TAG_IFD_STOP_POLLING_THREAD defined
- The O2MICRO OZ776 patch (for OZ776, OZ776_7772, REINER_SCT and
BLUDRIVEII_CCID) is no more supported with libusb-1.0
- correctly get the IFSC from the ATR (ATR parsing was not always
correct)
- some minor bugs removed
2012-12-15 01:29:31 +01:00
|
|
|
LICENSE= gnu-lgpl-v2.1
|
2008-03-04 12:30:08 +01:00
|
|
|
|
|
|
|
|
.include "../../mk/bsd.prefs.mk"
|
|
|
|
|
|
A major version bump gives a long changelog...
1.4.5:
- Add support of Alcor Micro AU9540, Ubisys 13.56MHz RFID (CCID),
BIFIT USB-Token iBank2key, BIFIT iBank2Key, Gemalto Ezio Shield
PinPad reader, Gemalto SA .NET Dual, Precise Sense MC reader (with
fingerprint), SDS DOMINO-Key TWIN Pro
- Add support of bPPDUSupport and FEATURE_CCID_ESC_COMMAND
- SCARD_ATTR_VENDOR_NAME and SCARD_ATTR_VENDOR_IFD_VERSION are not
the vendor name and version of the driver but of the IFD:
InterFace Device i.e. the smart card reader. We then return the
USB iManufacturer string as SCARD_ATTR_VENDOR_NAME and USB
bcdDevice as SCARD_ATTR_VENDOR_IFD_VERSION
- reduce binary size bu removing unused features from simclist
- Fix some warnings reported bu Coverity
1.4.4:
- Add support of Gemalto Ezio Shield, Gemalto Ezio CB+, Gemalto Ezio
Shield Secure Channel, Gemalto Ezio Shield PinPad and Gemalto Ezio
Generic
- Activate USB automatic power suspend. The Linux kernel should
power off the reader automatically if it is not used (pcscd is not
running).
- Add support of TLV Properties wLcdMaxCharacters and wLcdMaxLines.
They just duplicate wLcdLayout
- some minor bugs removed
1.4.3:
- Add support of Neowave Weneo, Vasco DIGIPASS 920, SCM SCL011,
Feitian ePass2003 readers
- use :libudev: instead of :libhal: naming scheme.
- Do not install RSA_SecurID_getpasswd and Kobil_mIDentity_switch
and the associated documentation.
- the Secure Pin Entry of the HP USB Smart Card Keyboard is bogus so
disable it
- some minor bugs removed
1.4.2:
- Add support of Feitian SCR310 reader (also known as 301v2), ACS
APG8201 PINhandy 1, Oberthur ID-ONE TOKEN SLIM v2, new Neowave
Weneo token, Vasco DIGIPASS KEY 860, Vasco DIGIPASS KEY 200,
Xiring Leo v2, Xiring MyLeo, Aktiv Rutoken lite readers
- Add back support of "bogus" Oz776, REINER SCT and BLUDRIVE II
- Ease detection of OpenCT by pcsc-lite
- disable use of interrupt card events for multi slots readers (the
algorithm is bogus and can't be used)
- fix minor problems detected by the clang tool
- some minor bugs removed
1.4.1:
- Add support of Gemalto Smart Guardian (SG CCID), ReinerSCT
cyberJack RFID basis, Akasa AK-CR-03, BZH uKeyCI800-K18, Free
Software Initiative of Japan Gnuk token readers
- Remove O2 Micro Oz776 and Blutronics Bludrive II CCID since they
are no more supported since version 1.4.0
- SecurePINVerify() & SecurePINModify(): Accept big and little
endian byte orders for multibytes fields. The application
should not use HOST_TO_CCID_16() and HOST_TO_CCID_32() any more
and just use the normal byte order of the architecture.
- Need pcsc-lite 1.6.5 for TAG_IFD_POLLING_THREAD_WITH_TIMEOUT
- Add --enable-embedded (default is no) to build libccid for an
embedded system. This will activate the NO_LOG option to disable
logging and limit RAM and disk consumption.
- Remove --enable-udev option since it is not used anymore with
libhal. The udev rules file is now used to change the access
rights of the device and not send a hotplug signal to pcscd.
See http://ludovicrousseau.blogspot.com/2010/09/pcscd-auto-start.html
- some minor bugs removed
1.4.0:
- add support of Kingtrust Multi-Reader, Dectel CI692, Todos CX00,
C3PO LTC36, ACS AET65, Broadcom 5880, Tianyu Smart Card Reader,
Gemalto Hybrid Smartcard Reader
- Add support of the SCM SDI 010 again. At least the contact
interface can be used.
- Use libusb-1.0 instead of libusb-0.1
- add support of TAG_IFD_STOP_POLLING_THREAD and use of the
asynchronous libusb API to be able to stop a transfer.
- Request pcsc-lite 1.6.2 minimum (instead of 1.6.0) to have
TAG_IFD_STOP_POLLING_THREAD defined
- The O2MICRO OZ776 patch (for OZ776, OZ776_7772, REINER_SCT and
BLUDRIVEII_CCID) is no more supported with libusb-1.0
- correctly get the IFSC from the ATR (ATR parsing was not always
correct)
- some minor bugs removed
2012-12-15 01:29:31 +01:00
|
|
|
BUILD_DEFS= VARBASE
|
|
|
|
|
|
2008-03-04 12:30:08 +01:00
|
|
|
GNU_CONFIGURE= yes
|
|
|
|
|
USE_LIBTOOL= yes
|
|
|
|
|
USE_TOOLS+= pkg-config
|
|
|
|
|
USE_TOOLS+= autoconf automake aclocal autoheader
|
2008-08-08 23:27:24 +02:00
|
|
|
USE_TOOLS+= flex perl
|
2008-03-04 12:30:08 +01:00
|
|
|
USE_LANGUAGES= c c++
|
2017-05-29 14:26:40 +02:00
|
|
|
|
|
|
|
|
# Work around a bug where the rules for parse do not include the
|
|
|
|
|
# PTHREAD vars. Not yet reported upstream.
|
2017-05-28 16:32:49 +02:00
|
|
|
PTHREAD_AUTO_VARS= yes
|
2008-03-04 12:30:08 +01:00
|
|
|
|
2019-11-04 22:12:51 +01:00
|
|
|
CONFIGURE_ARGS+= --sharedstatedir=${VARBASE:Q}
|
|
|
|
|
CONFIGURE_ARGS+= --sysconfdir=${PKG_SYSCONFDIR:Q}
|
2008-03-04 12:30:08 +01:00
|
|
|
|
A major version bump gives a long changelog...
1.4.5:
- Add support of Alcor Micro AU9540, Ubisys 13.56MHz RFID (CCID),
BIFIT USB-Token iBank2key, BIFIT iBank2Key, Gemalto Ezio Shield
PinPad reader, Gemalto SA .NET Dual, Precise Sense MC reader (with
fingerprint), SDS DOMINO-Key TWIN Pro
- Add support of bPPDUSupport and FEATURE_CCID_ESC_COMMAND
- SCARD_ATTR_VENDOR_NAME and SCARD_ATTR_VENDOR_IFD_VERSION are not
the vendor name and version of the driver but of the IFD:
InterFace Device i.e. the smart card reader. We then return the
USB iManufacturer string as SCARD_ATTR_VENDOR_NAME and USB
bcdDevice as SCARD_ATTR_VENDOR_IFD_VERSION
- reduce binary size bu removing unused features from simclist
- Fix some warnings reported bu Coverity
1.4.4:
- Add support of Gemalto Ezio Shield, Gemalto Ezio CB+, Gemalto Ezio
Shield Secure Channel, Gemalto Ezio Shield PinPad and Gemalto Ezio
Generic
- Activate USB automatic power suspend. The Linux kernel should
power off the reader automatically if it is not used (pcscd is not
running).
- Add support of TLV Properties wLcdMaxCharacters and wLcdMaxLines.
They just duplicate wLcdLayout
- some minor bugs removed
1.4.3:
- Add support of Neowave Weneo, Vasco DIGIPASS 920, SCM SCL011,
Feitian ePass2003 readers
- use :libudev: instead of :libhal: naming scheme.
- Do not install RSA_SecurID_getpasswd and Kobil_mIDentity_switch
and the associated documentation.
- the Secure Pin Entry of the HP USB Smart Card Keyboard is bogus so
disable it
- some minor bugs removed
1.4.2:
- Add support of Feitian SCR310 reader (also known as 301v2), ACS
APG8201 PINhandy 1, Oberthur ID-ONE TOKEN SLIM v2, new Neowave
Weneo token, Vasco DIGIPASS KEY 860, Vasco DIGIPASS KEY 200,
Xiring Leo v2, Xiring MyLeo, Aktiv Rutoken lite readers
- Add back support of "bogus" Oz776, REINER SCT and BLUDRIVE II
- Ease detection of OpenCT by pcsc-lite
- disable use of interrupt card events for multi slots readers (the
algorithm is bogus and can't be used)
- fix minor problems detected by the clang tool
- some minor bugs removed
1.4.1:
- Add support of Gemalto Smart Guardian (SG CCID), ReinerSCT
cyberJack RFID basis, Akasa AK-CR-03, BZH uKeyCI800-K18, Free
Software Initiative of Japan Gnuk token readers
- Remove O2 Micro Oz776 and Blutronics Bludrive II CCID since they
are no more supported since version 1.4.0
- SecurePINVerify() & SecurePINModify(): Accept big and little
endian byte orders for multibytes fields. The application
should not use HOST_TO_CCID_16() and HOST_TO_CCID_32() any more
and just use the normal byte order of the architecture.
- Need pcsc-lite 1.6.5 for TAG_IFD_POLLING_THREAD_WITH_TIMEOUT
- Add --enable-embedded (default is no) to build libccid for an
embedded system. This will activate the NO_LOG option to disable
logging and limit RAM and disk consumption.
- Remove --enable-udev option since it is not used anymore with
libhal. The udev rules file is now used to change the access
rights of the device and not send a hotplug signal to pcscd.
See http://ludovicrousseau.blogspot.com/2010/09/pcscd-auto-start.html
- some minor bugs removed
1.4.0:
- add support of Kingtrust Multi-Reader, Dectel CI692, Todos CX00,
C3PO LTC36, ACS AET65, Broadcom 5880, Tianyu Smart Card Reader,
Gemalto Hybrid Smartcard Reader
- Add support of the SCM SDI 010 again. At least the contact
interface can be used.
- Use libusb-1.0 instead of libusb-0.1
- add support of TAG_IFD_STOP_POLLING_THREAD and use of the
asynchronous libusb API to be able to stop a transfer.
- Request pcsc-lite 1.6.2 minimum (instead of 1.6.0) to have
TAG_IFD_STOP_POLLING_THREAD defined
- The O2MICRO OZ776 patch (for OZ776, OZ776_7772, REINER_SCT and
BLUDRIVEII_CCID) is no more supported with libusb-1.0
- correctly get the IFSC from the ATR (ATR parsing was not always
correct)
- some minor bugs removed
2012-12-15 01:29:31 +01:00
|
|
|
REPLACE_PERL= src/convert_version.pl src/create_Info_plist.pl
|
|
|
|
|
|
|
|
|
|
INSTALLATION_DIRS= bin ${PKGMANDIR}/man1 ${PKGMANDIR}/man8
|
|
|
|
|
INSTALLATION_DIRS+= sbin share/doc/ccid
|
2008-03-04 12:30:08 +01:00
|
|
|
|
|
|
|
|
pre-configure:
|
|
|
|
|
cd ${WRKSRC} && ${SH} bootstrap
|
|
|
|
|
|
|
|
|
|
post-install:
|
2020-08-19 17:05:50 +02:00
|
|
|
${INSTALL_DATA} ${WRKSRC}/README.md ${DESTDIR}${PREFIX}/share/doc/ccid/README.md
|
A major version bump gives a long changelog...
1.4.5:
- Add support of Alcor Micro AU9540, Ubisys 13.56MHz RFID (CCID),
BIFIT USB-Token iBank2key, BIFIT iBank2Key, Gemalto Ezio Shield
PinPad reader, Gemalto SA .NET Dual, Precise Sense MC reader (with
fingerprint), SDS DOMINO-Key TWIN Pro
- Add support of bPPDUSupport and FEATURE_CCID_ESC_COMMAND
- SCARD_ATTR_VENDOR_NAME and SCARD_ATTR_VENDOR_IFD_VERSION are not
the vendor name and version of the driver but of the IFD:
InterFace Device i.e. the smart card reader. We then return the
USB iManufacturer string as SCARD_ATTR_VENDOR_NAME and USB
bcdDevice as SCARD_ATTR_VENDOR_IFD_VERSION
- reduce binary size bu removing unused features from simclist
- Fix some warnings reported bu Coverity
1.4.4:
- Add support of Gemalto Ezio Shield, Gemalto Ezio CB+, Gemalto Ezio
Shield Secure Channel, Gemalto Ezio Shield PinPad and Gemalto Ezio
Generic
- Activate USB automatic power suspend. The Linux kernel should
power off the reader automatically if it is not used (pcscd is not
running).
- Add support of TLV Properties wLcdMaxCharacters and wLcdMaxLines.
They just duplicate wLcdLayout
- some minor bugs removed
1.4.3:
- Add support of Neowave Weneo, Vasco DIGIPASS 920, SCM SCL011,
Feitian ePass2003 readers
- use :libudev: instead of :libhal: naming scheme.
- Do not install RSA_SecurID_getpasswd and Kobil_mIDentity_switch
and the associated documentation.
- the Secure Pin Entry of the HP USB Smart Card Keyboard is bogus so
disable it
- some minor bugs removed
1.4.2:
- Add support of Feitian SCR310 reader (also known as 301v2), ACS
APG8201 PINhandy 1, Oberthur ID-ONE TOKEN SLIM v2, new Neowave
Weneo token, Vasco DIGIPASS KEY 860, Vasco DIGIPASS KEY 200,
Xiring Leo v2, Xiring MyLeo, Aktiv Rutoken lite readers
- Add back support of "bogus" Oz776, REINER SCT and BLUDRIVE II
- Ease detection of OpenCT by pcsc-lite
- disable use of interrupt card events for multi slots readers (the
algorithm is bogus and can't be used)
- fix minor problems detected by the clang tool
- some minor bugs removed
1.4.1:
- Add support of Gemalto Smart Guardian (SG CCID), ReinerSCT
cyberJack RFID basis, Akasa AK-CR-03, BZH uKeyCI800-K18, Free
Software Initiative of Japan Gnuk token readers
- Remove O2 Micro Oz776 and Blutronics Bludrive II CCID since they
are no more supported since version 1.4.0
- SecurePINVerify() & SecurePINModify(): Accept big and little
endian byte orders for multibytes fields. The application
should not use HOST_TO_CCID_16() and HOST_TO_CCID_32() any more
and just use the normal byte order of the architecture.
- Need pcsc-lite 1.6.5 for TAG_IFD_POLLING_THREAD_WITH_TIMEOUT
- Add --enable-embedded (default is no) to build libccid for an
embedded system. This will activate the NO_LOG option to disable
logging and limit RAM and disk consumption.
- Remove --enable-udev option since it is not used anymore with
libhal. The udev rules file is now used to change the access
rights of the device and not send a hotplug signal to pcscd.
See http://ludovicrousseau.blogspot.com/2010/09/pcscd-auto-start.html
- some minor bugs removed
1.4.0:
- add support of Kingtrust Multi-Reader, Dectel CI692, Todos CX00,
C3PO LTC36, ACS AET65, Broadcom 5880, Tianyu Smart Card Reader,
Gemalto Hybrid Smartcard Reader
- Add support of the SCM SDI 010 again. At least the contact
interface can be used.
- Use libusb-1.0 instead of libusb-0.1
- add support of TAG_IFD_STOP_POLLING_THREAD and use of the
asynchronous libusb API to be able to stop a transfer.
- Request pcsc-lite 1.6.2 minimum (instead of 1.6.0) to have
TAG_IFD_STOP_POLLING_THREAD defined
- The O2MICRO OZ776 patch (for OZ776, OZ776_7772, REINER_SCT and
BLUDRIVEII_CCID) is no more supported with libusb-1.0
- correctly get the IFSC from the ATR (ATR parsing was not always
correct)
- some minor bugs removed
2012-12-15 01:29:31 +01:00
|
|
|
${INSTALL_DATA} ${WRKSRC}/contrib/RSA_SecurID/RSA_SecurID_getpasswd \
|
|
|
|
|
${DESTDIR}${PREFIX}/bin/RSA_SecurID_getpasswd
|
|
|
|
|
${INSTALL_DATA} ${WRKSRC}/contrib/RSA_SecurID/RSA_SecurID_getpasswd.1 \
|
|
|
|
|
${DESTDIR}${PREFIX}/${PKGMANDIR}/man1/RSA_SecurID_getpasswd.1
|
|
|
|
|
${INSTALL_DATA} ${WRKSRC}/contrib/Kobil_mIDentity_switch/Kobil_mIDentity_switch \
|
|
|
|
|
${DESTDIR}${PREFIX}/sbin/Kobil_mIDentity_switch
|
|
|
|
|
${INSTALL_DATA} ${WRKSRC}/contrib/Kobil_mIDentity_switch/Kobil_mIDentity_switch.8 \
|
|
|
|
|
${DESTDIR}${PREFIX}/${PKGMANDIR}/man8/Kobil_mIDentity_switch.8
|
|
|
|
|
${INSTALL_DATA} ${WRKSRC}/contrib/Kobil_mIDentity_switch/README_Kobil_mIDentity_switch.txt \
|
|
|
|
|
${DESTDIR}${PREFIX}/share/doc/ccid/README_Kobil_mIDentity_switch.txt
|
2008-03-04 12:30:08 +01:00
|
|
|
|
|
|
|
|
.include "../../security/pcsc-lite/buildlink3.mk"
|
2019-08-14 02:17:43 +02:00
|
|
|
.if ${OPSYS} == "Linux"
|
|
|
|
|
BUILDLINK_DEPMETHOD.flex= full
|
|
|
|
|
.include "../../devel/flex/buildlink3.mk"
|
|
|
|
|
.endif
|
A major version bump gives a long changelog...
1.4.5:
- Add support of Alcor Micro AU9540, Ubisys 13.56MHz RFID (CCID),
BIFIT USB-Token iBank2key, BIFIT iBank2Key, Gemalto Ezio Shield
PinPad reader, Gemalto SA .NET Dual, Precise Sense MC reader (with
fingerprint), SDS DOMINO-Key TWIN Pro
- Add support of bPPDUSupport and FEATURE_CCID_ESC_COMMAND
- SCARD_ATTR_VENDOR_NAME and SCARD_ATTR_VENDOR_IFD_VERSION are not
the vendor name and version of the driver but of the IFD:
InterFace Device i.e. the smart card reader. We then return the
USB iManufacturer string as SCARD_ATTR_VENDOR_NAME and USB
bcdDevice as SCARD_ATTR_VENDOR_IFD_VERSION
- reduce binary size bu removing unused features from simclist
- Fix some warnings reported bu Coverity
1.4.4:
- Add support of Gemalto Ezio Shield, Gemalto Ezio CB+, Gemalto Ezio
Shield Secure Channel, Gemalto Ezio Shield PinPad and Gemalto Ezio
Generic
- Activate USB automatic power suspend. The Linux kernel should
power off the reader automatically if it is not used (pcscd is not
running).
- Add support of TLV Properties wLcdMaxCharacters and wLcdMaxLines.
They just duplicate wLcdLayout
- some minor bugs removed
1.4.3:
- Add support of Neowave Weneo, Vasco DIGIPASS 920, SCM SCL011,
Feitian ePass2003 readers
- use :libudev: instead of :libhal: naming scheme.
- Do not install RSA_SecurID_getpasswd and Kobil_mIDentity_switch
and the associated documentation.
- the Secure Pin Entry of the HP USB Smart Card Keyboard is bogus so
disable it
- some minor bugs removed
1.4.2:
- Add support of Feitian SCR310 reader (also known as 301v2), ACS
APG8201 PINhandy 1, Oberthur ID-ONE TOKEN SLIM v2, new Neowave
Weneo token, Vasco DIGIPASS KEY 860, Vasco DIGIPASS KEY 200,
Xiring Leo v2, Xiring MyLeo, Aktiv Rutoken lite readers
- Add back support of "bogus" Oz776, REINER SCT and BLUDRIVE II
- Ease detection of OpenCT by pcsc-lite
- disable use of interrupt card events for multi slots readers (the
algorithm is bogus and can't be used)
- fix minor problems detected by the clang tool
- some minor bugs removed
1.4.1:
- Add support of Gemalto Smart Guardian (SG CCID), ReinerSCT
cyberJack RFID basis, Akasa AK-CR-03, BZH uKeyCI800-K18, Free
Software Initiative of Japan Gnuk token readers
- Remove O2 Micro Oz776 and Blutronics Bludrive II CCID since they
are no more supported since version 1.4.0
- SecurePINVerify() & SecurePINModify(): Accept big and little
endian byte orders for multibytes fields. The application
should not use HOST_TO_CCID_16() and HOST_TO_CCID_32() any more
and just use the normal byte order of the architecture.
- Need pcsc-lite 1.6.5 for TAG_IFD_POLLING_THREAD_WITH_TIMEOUT
- Add --enable-embedded (default is no) to build libccid for an
embedded system. This will activate the NO_LOG option to disable
logging and limit RAM and disk consumption.
- Remove --enable-udev option since it is not used anymore with
libhal. The udev rules file is now used to change the access
rights of the device and not send a hotplug signal to pcscd.
See http://ludovicrousseau.blogspot.com/2010/09/pcscd-auto-start.html
- some minor bugs removed
1.4.0:
- add support of Kingtrust Multi-Reader, Dectel CI692, Todos CX00,
C3PO LTC36, ACS AET65, Broadcom 5880, Tianyu Smart Card Reader,
Gemalto Hybrid Smartcard Reader
- Add support of the SCM SDI 010 again. At least the contact
interface can be used.
- Use libusb-1.0 instead of libusb-0.1
- add support of TAG_IFD_STOP_POLLING_THREAD and use of the
asynchronous libusb API to be able to stop a transfer.
- Request pcsc-lite 1.6.2 minimum (instead of 1.6.0) to have
TAG_IFD_STOP_POLLING_THREAD defined
- The O2MICRO OZ776 patch (for OZ776, OZ776_7772, REINER_SCT and
BLUDRIVEII_CCID) is no more supported with libusb-1.0
- correctly get the IFSC from the ATR (ATR parsing was not always
correct)
- some minor bugs removed
2012-12-15 01:29:31 +01:00
|
|
|
.include "../../devel/libusb1/buildlink3.mk"
|
2008-03-04 12:30:08 +01:00
|
|
|
.include "../../mk/pthread.buildlink3.mk"
|
|
|
|
|
.include "../../mk/bsd.pkg.mk"
|
