2012-07-30 08:57:21 +02:00
|
|
|
# $NetBSD: Makefile.common,v 1.32 2012/07/30 06:57:21 sbd Exp $
|
1999-09-06 21:30:19 +02:00
|
|
|
|
Update to 2.5.2p1, provided by Nick Goffee of BBN.
[bugfixes and minor improvements omitted; see NEWS]
Changes in release 2.5.2
* krb5 auth is working
* Works with IPv6 address
* Amanda configuration file changes
o amanda.conf changes
+ debugging is enabled in the config file
see all debug_* config option
+ tapetype 'readblocksize', if maxtapeblocksize is set too
larger for your hardware
* Amanda command changes
o amadmin: new 'holding list' and 'holding delete' subcommand.
Changes in release 2.5.1p3
* Works with tar-1.16 and exit status of 1.
Changes in release 2.5.1p2
* amoverview is working
* dumptype starttime is working
* Amanda command changes
o amtape accept the -o arguments
o amgetconf --list to list all tapetype, dumptype, holdingdisk
or interface
o amgetconf can return a value of a specific tapetype, dumptype,
holdingdisk or interface
Changes in release 2.5.1p1
* Remove contrib/sst.
Changes in release 2.5.1
* Defects found by Coverity scan and Klocwork K7 analysis tools fixed.
* Works with GNU tar 1.15.91 - work with new gtar state file format.
* Open SSL encryption support
* Two new authentication methods: bsdtcp, bsdudp.
* Unlimited number of DLEs on a client with bsdtcp, rsh and ssh
authentication methods.
* Recovery process amrecover uses Secure API. amoldrecover command
(same syntax and functionality as amrecover command) is provided for
compatibility with old Amanda releases. amoldrecover command uses old
amidxtaped/amindexd protocol.
* Amanda debug files are separated into client/server/amandad and
are also classified based on Amanda configuration name.
* Amanda command changes
o amfetchdump -o is replaced by -O.
o amcheck -w option does all tests including the tape writable test.
Use amcheck -t -w to do only the tape writable test.
o -o command option to override Amanda configuration. See amanda man
page for details.
o amgetconf command doesn't write the BUGGY message when a entry
is not found in the configuration file.
* Amanda configuration file changes
o amanda.conf changes
+ amrecover_do_fsf in amanda.conf defaults to yes
+ amrecover_check_label in amanda.conf defaults to yes
+ usetimestamps in amanda.conf to support multiple
backup runs in a calendar day.
+ holdingdisk in amanda.conf supports new values:
NEVER, AUTO, REQUIRED.
+ amandad_path, client_username and ssh_keys in
amanda.conf for ssh/rsh authentication.
o New amanda client configuration file - amanda-client.conf.
Different client configuration file can be used for each Amanda
configuration.
+ gnutar_list-dir and amandates can be specified in
Amanda client configuration file - amanda-client.conf
o .amandahosts format changes to allow use of secure API for recovery.
o Amanda service entries in xinetd configuration has changed.
Changes in release 2.5.0p1
* Add the 'amtape update' command.
Changes in release 2.5.0
* Communication security/authentication: Kerberos 4/5, OpenSSH
* Data security: Symmetric/Assymetric encrytion algorithms (aesutil
and gpg encryption), Encryption can be done on server or client,
Custom encryption utilities can be used.
* Compression: Ability to add custom compression tools. This is a
really useful feature especially since it can specified for a DLE. You
can use different compression algorithm for images, binaries, ascii files
and so on.
* Dump images spanning multiple media volumes - Dump images are no
longer restricted to a single media volume (tape or vtape). Data restoration
can be done using amrecover and amfetchdump commands.
* Auto tape labelling - This optional feature is good for disk backups.
Change in release 2.4.5
* new displayunit global option to select the unit use to display number
k=kilo, m=mega, g=giga, t=tera.
* new amoverview -skipmissed option.
Change in release 2.4.5b1
* holding disk disk use timestamped directory.
* autoflush flush today's dump.
* new bumppercent global option, this should improve bumping criteria,
the bumpsize is set to a fixed value which can be adequate for small
and large disk.
* bumpsize, bumppercent, bumpdays and bumpmult can be in a dumptype.
* calcsize support include and exclude like gnutar.
* new 'estimate' dumptype option to select estimate type:
CLIENT: estimate by the dumping program.
CALCSIZE: estimate by the calcsize program, a lot faster but less acurate.
SERVER: estimate based on statistic from previous run, take second but
can be wrong on the estimate size.
2008-02-15 17:23:09 +01:00
|
|
|
# used by sysutils/amanda-common/Makefile
|
|
|
|
|
# used by sysutils/amanda-client/Makefile
|
|
|
|
|
# used by sysutils/amanda-server/Makefile
|
|
|
|
|
# used by sysutils/amanda-plot/Makefile
|
|
|
|
|
|
2012-07-30 08:57:21 +02:00
|
|
|
COMMONDIR= ../../sysutils/amanda-common
|
|
|
|
|
.include "${COMMONDIR}/version.mk"
|
|
|
|
|
|
|
|
|
|
DISTNAME= amanda-${AMANDA_VERSION}
|
2006-10-02 23:05:44 +02:00
|
|
|
CATEGORIES= sysutils
|
2007-01-05 13:47:27 +01:00
|
|
|
MASTER_SITES?= ${MASTER_SITE_SOURCEFORGE:=amanda/}
|
2004-05-12 20:45:25 +02:00
|
|
|
|
2006-10-02 23:05:44 +02:00
|
|
|
MAINTAINER= pkgsrc-users@NetBSD.org
|
|
|
|
|
HOMEPAGE= http://www.amanda.org/
|
2012-07-19 09:30:55 +02:00
|
|
|
LICENSE= modified-bsd AND gnu-gpl-v2
|
2006-10-02 23:05:44 +02:00
|
|
|
|
|
|
|
|
.include "../../mk/bsd.prefs.mk"
|
2004-05-12 20:45:25 +02:00
|
|
|
|
2002-09-05 20:07:52 +02:00
|
|
|
.if ${OPSYS} == "SunOS"
|
2001-10-19 11:44:10 +02:00
|
|
|
AMANDA_GROUP?= sysadmin
|
2002-09-05 20:07:52 +02:00
|
|
|
.else
|
|
|
|
|
# NetBSD, Linux and Darwin
|
2002-07-21 21:07:32 +02:00
|
|
|
AMANDA_GROUP?= operator
|
1999-09-06 21:30:19 +02:00
|
|
|
.endif
|
|
|
|
|
|
|
|
|
|
AMANDA_USER?= backup
|
2004-11-21 00:09:48 +01:00
|
|
|
AMANDA_TMP?= /tmp/amanda
|
2004-12-28 10:10:50 +01:00
|
|
|
AMANDA_VAR?= ${VARBASE}/amanda
|
1999-09-06 21:30:19 +02:00
|
|
|
|
2007-07-04 22:54:31 +02:00
|
|
|
PKG_GROUPS_VARS+= AMANDA_GROUP
|
|
|
|
|
PKG_USERS_VARS+= AMANDA_USER
|
Update to 2.5.2p1, provided by Nick Goffee of BBN.
[bugfixes and minor improvements omitted; see NEWS]
Changes in release 2.5.2
* krb5 auth is working
* Works with IPv6 address
* Amanda configuration file changes
o amanda.conf changes
+ debugging is enabled in the config file
see all debug_* config option
+ tapetype 'readblocksize', if maxtapeblocksize is set too
larger for your hardware
* Amanda command changes
o amadmin: new 'holding list' and 'holding delete' subcommand.
Changes in release 2.5.1p3
* Works with tar-1.16 and exit status of 1.
Changes in release 2.5.1p2
* amoverview is working
* dumptype starttime is working
* Amanda command changes
o amtape accept the -o arguments
o amgetconf --list to list all tapetype, dumptype, holdingdisk
or interface
o amgetconf can return a value of a specific tapetype, dumptype,
holdingdisk or interface
Changes in release 2.5.1p1
* Remove contrib/sst.
Changes in release 2.5.1
* Defects found by Coverity scan and Klocwork K7 analysis tools fixed.
* Works with GNU tar 1.15.91 - work with new gtar state file format.
* Open SSL encryption support
* Two new authentication methods: bsdtcp, bsdudp.
* Unlimited number of DLEs on a client with bsdtcp, rsh and ssh
authentication methods.
* Recovery process amrecover uses Secure API. amoldrecover command
(same syntax and functionality as amrecover command) is provided for
compatibility with old Amanda releases. amoldrecover command uses old
amidxtaped/amindexd protocol.
* Amanda debug files are separated into client/server/amandad and
are also classified based on Amanda configuration name.
* Amanda command changes
o amfetchdump -o is replaced by -O.
o amcheck -w option does all tests including the tape writable test.
Use amcheck -t -w to do only the tape writable test.
o -o command option to override Amanda configuration. See amanda man
page for details.
o amgetconf command doesn't write the BUGGY message when a entry
is not found in the configuration file.
* Amanda configuration file changes
o amanda.conf changes
+ amrecover_do_fsf in amanda.conf defaults to yes
+ amrecover_check_label in amanda.conf defaults to yes
+ usetimestamps in amanda.conf to support multiple
backup runs in a calendar day.
+ holdingdisk in amanda.conf supports new values:
NEVER, AUTO, REQUIRED.
+ amandad_path, client_username and ssh_keys in
amanda.conf for ssh/rsh authentication.
o New amanda client configuration file - amanda-client.conf.
Different client configuration file can be used for each Amanda
configuration.
+ gnutar_list-dir and amandates can be specified in
Amanda client configuration file - amanda-client.conf
o .amandahosts format changes to allow use of secure API for recovery.
o Amanda service entries in xinetd configuration has changed.
Changes in release 2.5.0p1
* Add the 'amtape update' command.
Changes in release 2.5.0
* Communication security/authentication: Kerberos 4/5, OpenSSH
* Data security: Symmetric/Assymetric encrytion algorithms (aesutil
and gpg encryption), Encryption can be done on server or client,
Custom encryption utilities can be used.
* Compression: Ability to add custom compression tools. This is a
really useful feature especially since it can specified for a DLE. You
can use different compression algorithm for images, binaries, ascii files
and so on.
* Dump images spanning multiple media volumes - Dump images are no
longer restricted to a single media volume (tape or vtape). Data restoration
can be done using amrecover and amfetchdump commands.
* Auto tape labelling - This optional feature is good for disk backups.
Change in release 2.4.5
* new displayunit global option to select the unit use to display number
k=kilo, m=mega, g=giga, t=tera.
* new amoverview -skipmissed option.
Change in release 2.4.5b1
* holding disk disk use timestamped directory.
* autoflush flush today's dump.
* new bumppercent global option, this should improve bumping criteria,
the bumpsize is set to a fixed value which can be adequate for small
and large disk.
* bumpsize, bumppercent, bumpdays and bumpmult can be in a dumptype.
* calcsize support include and exclude like gnutar.
* new 'estimate' dumptype option to select estimate type:
CLIENT: estimate by the dumping program.
CALCSIZE: estimate by the calcsize program, a lot faster but less acurate.
SERVER: estimate based on statistic from previous run, take second but
can be wrong on the estimate size.
2008-02-15 17:23:09 +01:00
|
|
|
BUILD_DEFS+= AMANDA_TMP AMANDA_VAR VARBASE
|
2001-06-14 23:54:35 +02:00
|
|
|
|
2000-08-17 04:26:26 +02:00
|
|
|
USE_LIBTOOL= yes
|
2001-06-14 23:54:35 +02:00
|
|
|
|
2005-08-02 11:26:06 +02:00
|
|
|
USE_TOOLS+= gzip:run gtar:run
|
2005-12-05 21:49:47 +01:00
|
|
|
CONFIGURE_ENV+= ac_cv_path_GZIP=${TOOLS_GZIP_CMD:Q}
|
|
|
|
|
CONFIGURE_ENV+= GNUTAR=${TOOLS_GTAR:Q}
|
2005-08-02 11:26:06 +02:00
|
|
|
|
1999-09-06 21:30:19 +02:00
|
|
|
GNU_CONFIGURE= yes
|
2005-12-06 00:55:01 +01:00
|
|
|
CONFIGURE_ARGS+= --with-user=${AMANDA_USER:Q}
|
|
|
|
|
CONFIGURE_ARGS+= --with-group=${AMANDA_GROUP:Q}
|
2010-02-19 19:55:56 +01:00
|
|
|
CONFIGURE_ARGS+= --with-owner=${REAL_ROOT_USER:Q}
|
2001-06-14 23:54:35 +02:00
|
|
|
CONFIGURE_ARGS+= --with-mmap
|
|
|
|
|
CONFIGURE_ARGS+= --with-amandahosts
|
2005-12-06 00:55:01 +01:00
|
|
|
CONFIGURE_ARGS+= --with-tmpdir=${AMANDA_TMP:Q}
|
|
|
|
|
CONFIGURE_ARGS+= --localstatedir=${AMANDA_VAR:Q}
|
2001-06-14 23:54:35 +02:00
|
|
|
CONFIGURE_ARGS+= --with-gnutar-listdir=${AMANDA_VAR}/gnutar-lists
|
|
|
|
|
CONFIGURE_ARGS+= --with-dump-honor-nodump
|
2005-12-06 00:55:01 +01:00
|
|
|
CONFIGURE_ARGS+= --sysconfdir=${PKG_SYSCONFDIR:Q}
|
Update to 2.5.2p1, provided by Nick Goffee of BBN.
[bugfixes and minor improvements omitted; see NEWS]
Changes in release 2.5.2
* krb5 auth is working
* Works with IPv6 address
* Amanda configuration file changes
o amanda.conf changes
+ debugging is enabled in the config file
see all debug_* config option
+ tapetype 'readblocksize', if maxtapeblocksize is set too
larger for your hardware
* Amanda command changes
o amadmin: new 'holding list' and 'holding delete' subcommand.
Changes in release 2.5.1p3
* Works with tar-1.16 and exit status of 1.
Changes in release 2.5.1p2
* amoverview is working
* dumptype starttime is working
* Amanda command changes
o amtape accept the -o arguments
o amgetconf --list to list all tapetype, dumptype, holdingdisk
or interface
o amgetconf can return a value of a specific tapetype, dumptype,
holdingdisk or interface
Changes in release 2.5.1p1
* Remove contrib/sst.
Changes in release 2.5.1
* Defects found by Coverity scan and Klocwork K7 analysis tools fixed.
* Works with GNU tar 1.15.91 - work with new gtar state file format.
* Open SSL encryption support
* Two new authentication methods: bsdtcp, bsdudp.
* Unlimited number of DLEs on a client with bsdtcp, rsh and ssh
authentication methods.
* Recovery process amrecover uses Secure API. amoldrecover command
(same syntax and functionality as amrecover command) is provided for
compatibility with old Amanda releases. amoldrecover command uses old
amidxtaped/amindexd protocol.
* Amanda debug files are separated into client/server/amandad and
are also classified based on Amanda configuration name.
* Amanda command changes
o amfetchdump -o is replaced by -O.
o amcheck -w option does all tests including the tape writable test.
Use amcheck -t -w to do only the tape writable test.
o -o command option to override Amanda configuration. See amanda man
page for details.
o amgetconf command doesn't write the BUGGY message when a entry
is not found in the configuration file.
* Amanda configuration file changes
o amanda.conf changes
+ amrecover_do_fsf in amanda.conf defaults to yes
+ amrecover_check_label in amanda.conf defaults to yes
+ usetimestamps in amanda.conf to support multiple
backup runs in a calendar day.
+ holdingdisk in amanda.conf supports new values:
NEVER, AUTO, REQUIRED.
+ amandad_path, client_username and ssh_keys in
amanda.conf for ssh/rsh authentication.
o New amanda client configuration file - amanda-client.conf.
Different client configuration file can be used for each Amanda
configuration.
+ gnutar_list-dir and amandates can be specified in
Amanda client configuration file - amanda-client.conf
o .amandahosts format changes to allow use of secure API for recovery.
o Amanda service entries in xinetd configuration has changed.
Changes in release 2.5.0p1
* Add the 'amtape update' command.
Changes in release 2.5.0
* Communication security/authentication: Kerberos 4/5, OpenSSH
* Data security: Symmetric/Assymetric encrytion algorithms (aesutil
and gpg encryption), Encryption can be done on server or client,
Custom encryption utilities can be used.
* Compression: Ability to add custom compression tools. This is a
really useful feature especially since it can specified for a DLE. You
can use different compression algorithm for images, binaries, ascii files
and so on.
* Dump images spanning multiple media volumes - Dump images are no
longer restricted to a single media volume (tape or vtape). Data restoration
can be done using amrecover and amfetchdump commands.
* Auto tape labelling - This optional feature is good for disk backups.
Change in release 2.4.5
* new displayunit global option to select the unit use to display number
k=kilo, m=mega, g=giga, t=tera.
* new amoverview -skipmissed option.
Change in release 2.4.5b1
* holding disk disk use timestamped directory.
* autoflush flush today's dump.
* new bumppercent global option, this should improve bumping criteria,
the bumpsize is set to a fixed value which can be adequate for small
and large disk.
* bumpsize, bumppercent, bumpdays and bumpmult can be in a dumptype.
* calcsize support include and exclude like gnutar.
* new 'estimate' dumptype option to select estimate type:
CLIENT: estimate by the dumping program.
CALCSIZE: estimate by the calcsize program, a lot faster but less acurate.
SERVER: estimate based on statistic from previous run, take second but
can be wrong on the estimate size.
2008-02-15 17:23:09 +01:00
|
|
|
|
2008-07-29 19:21:39 +02:00
|
|
|
.include "../../sysutils/amanda-common/options.mk"
|
