Update to 1.1.30, submitted by Stephane Fortier in PR pkg/22867.
"ChangeLog" since 1.1.28 w/dates and blank lines elided:
* release 1.1.30
* voice/vgetty/answer.c, voice/include/default.c: integrate Paul
Fox' pre_message and beep_sound patches
* voice/libvoice/detect.c: recognize MultiTech MT3334ZDXV
* faxhng.c: add some result codes for the i4l DIVA driver
* voice/libvoice/IS_101.c: fix DTMF events for the unshielded case
* voice/vgetty/answer.c: accept arbitrary ring types, not only 0..6
* ring.c: map DRON/DROF return codes to binary word, use result
as distinctive RING number
* frontends/www/README: add user authentication example
* voice/libvoice/V253modem.c: repair messed-up 16 bit PCM patch
* release 1.1.29
* voice/libvoice/detect.c: insert delay before sending ATE0 to
modem (timing issue - modem might not have sent the full \r\n
sequence from the last "OK" yet when the new AT comes in)
* doc/*.[158]in: bring man pages up to date
* tools/ltest.c, tools/mid.c: adapt to new lprintf() prototype
* mgetty.h, logfile.c: adapt to use <stdarg.h> and "..."
function declaration (unless USE_VARARGS is set, which is
needed for NeXT platforms). Karsten Keil <kkeil@suse.de>.
* Makefile: relax permissions on sendfax and faxrunq.config
install - must be readable/executeable by user "fax" now
* doc/faxrunqd.8in: document "-u", minor updates
* fax/faxrunqd.in, fax/faxspool.in, fax/faxrunq.in: revert
Aug 6, 200 change - put faxqueue_done back into $FAX_SPOOL_OUT/
(faxrunq/faxrunqd have no access rights to $VARRUNDIR/ anymore,
and $FAX_SPOOL_OUT is no longer world writeable anyway)
* fax/faxq.in: change from .last_run to faxqueue_done
* fax/faxrunqd.in: add "-u <user>" switch (set uid to <user>)
* fax/faxq-helper.c: finalize new fax queue handling using helper
process (suid fax) and a fax queue that is no longer
world-readable (open issue since 1994 :) )
* faxrecp.c: implement experimental teergrubing mode (signal
"page bad, please retransmit" at the end of each page - or just
hang up hard on caller). Activared with "modem-quirks 0x100"
or "0x200", respectively.
* voice/libvoice/V253Modem.c: add 16 bit linear PCM support
(patch coming from Peter Bruley)
* voice/pvftools/pvftormd.c, rmdtopvf.c: add 16 bit linear PCM
* rework faxq-helper concept (suid root -> suid fax)
* fax/faxq.in: adap "-r" to use faxq-helper
* fax/faxspool.in: adapt to use faxq-helper
* fax/faxrm.in: adapt to use faxq-helper
* Makefile: create FAX_SPOOL_OUT with mode 755 and owner FAX_OUT_USER
* Makefile: add FAX_OUT_USER definition, pass lots of variables
to fax/Makefile (for faxq-helper)
* README.1st: add instructions about FAX_OUT_USER setup
* doc/mgetty.texi-in add instructions about FAX_OUT_USER setup
* fax/faxrunqd.in: fix symlink / file overwrite race in JOB files.
Pointed out by Jablonovsky Alexander <sasha@cit-saratov.ru>
* doc/faxrunq.8in: point out insecurity in symlink handling
* mgetty.h: Intel 64bit platforms (__x86_64__) needs PTR_IS_LONG
* voice/libvoice/IS_101.c: implement DLE shielding for long DTMF tones
for V.253 (initially by Lee Howard <faxguy@howardsilvan.com>)
* mgetty.c: throw out DIST_RING #define - not used anymore
* ring.c: make sure action strings (CONNECT) are only recognized
at the beginning if a line, not in the middle (Paul Fox,
pgf@foxharp.boston.ma.us, CALLER NAME = CONNECTICUT).
* cnd.c: replace non-printable characters and quotes in caller ID
or caller name strings with ' ' - safeguard for passing them to
shell later on.
* doc/mgetty.texi-in: add stuff about recent multitech modems,
superfine+v.34 fax, and rework chapter about common problems
* faxlib.c: fix ugliness with USR modems reporting remote fax
ID as " 12345" -> skip leading '"' and all whitespace
* cnd.c: possible buffer overrun via CallName
(found by "A. Guru" <a.guru@sympatico.ca>)
* fax/faxrunqd: fix priority vs. write combining bug
* login.c: check for close-on-exec bit on FD 0 (FreeBSD 4.1 bug)
* login.c: export Caller Name as environment variable $CALLER_NAME
* login.c: make message about bad permissions even more clear
2003-09-20 18:39:33 +02:00
|
|
|
$NetBSD: patch-aj,v 1.3 2003/09/20 16:39:39 fredb Exp $
|
2002-03-06 20:19:02 +01:00
|
|
|
|
Update to 1.1.30, submitted by Stephane Fortier in PR pkg/22867.
"ChangeLog" since 1.1.28 w/dates and blank lines elided:
* release 1.1.30
* voice/vgetty/answer.c, voice/include/default.c: integrate Paul
Fox' pre_message and beep_sound patches
* voice/libvoice/detect.c: recognize MultiTech MT3334ZDXV
* faxhng.c: add some result codes for the i4l DIVA driver
* voice/libvoice/IS_101.c: fix DTMF events for the unshielded case
* voice/vgetty/answer.c: accept arbitrary ring types, not only 0..6
* ring.c: map DRON/DROF return codes to binary word, use result
as distinctive RING number
* frontends/www/README: add user authentication example
* voice/libvoice/V253modem.c: repair messed-up 16 bit PCM patch
* release 1.1.29
* voice/libvoice/detect.c: insert delay before sending ATE0 to
modem (timing issue - modem might not have sent the full \r\n
sequence from the last "OK" yet when the new AT comes in)
* doc/*.[158]in: bring man pages up to date
* tools/ltest.c, tools/mid.c: adapt to new lprintf() prototype
* mgetty.h, logfile.c: adapt to use <stdarg.h> and "..."
function declaration (unless USE_VARARGS is set, which is
needed for NeXT platforms). Karsten Keil <kkeil@suse.de>.
* Makefile: relax permissions on sendfax and faxrunq.config
install - must be readable/executeable by user "fax" now
* doc/faxrunqd.8in: document "-u", minor updates
* fax/faxrunqd.in, fax/faxspool.in, fax/faxrunq.in: revert
Aug 6, 200 change - put faxqueue_done back into $FAX_SPOOL_OUT/
(faxrunq/faxrunqd have no access rights to $VARRUNDIR/ anymore,
and $FAX_SPOOL_OUT is no longer world writeable anyway)
* fax/faxq.in: change from .last_run to faxqueue_done
* fax/faxrunqd.in: add "-u <user>" switch (set uid to <user>)
* fax/faxq-helper.c: finalize new fax queue handling using helper
process (suid fax) and a fax queue that is no longer
world-readable (open issue since 1994 :) )
* faxrecp.c: implement experimental teergrubing mode (signal
"page bad, please retransmit" at the end of each page - or just
hang up hard on caller). Activared with "modem-quirks 0x100"
or "0x200", respectively.
* voice/libvoice/V253Modem.c: add 16 bit linear PCM support
(patch coming from Peter Bruley)
* voice/pvftools/pvftormd.c, rmdtopvf.c: add 16 bit linear PCM
* rework faxq-helper concept (suid root -> suid fax)
* fax/faxq.in: adap "-r" to use faxq-helper
* fax/faxspool.in: adapt to use faxq-helper
* fax/faxrm.in: adapt to use faxq-helper
* Makefile: create FAX_SPOOL_OUT with mode 755 and owner FAX_OUT_USER
* Makefile: add FAX_OUT_USER definition, pass lots of variables
to fax/Makefile (for faxq-helper)
* README.1st: add instructions about FAX_OUT_USER setup
* doc/mgetty.texi-in add instructions about FAX_OUT_USER setup
* fax/faxrunqd.in: fix symlink / file overwrite race in JOB files.
Pointed out by Jablonovsky Alexander <sasha@cit-saratov.ru>
* doc/faxrunq.8in: point out insecurity in symlink handling
* mgetty.h: Intel 64bit platforms (__x86_64__) needs PTR_IS_LONG
* voice/libvoice/IS_101.c: implement DLE shielding for long DTMF tones
for V.253 (initially by Lee Howard <faxguy@howardsilvan.com>)
* mgetty.c: throw out DIST_RING #define - not used anymore
* ring.c: make sure action strings (CONNECT) are only recognized
at the beginning if a line, not in the middle (Paul Fox,
pgf@foxharp.boston.ma.us, CALLER NAME = CONNECTICUT).
* cnd.c: replace non-printable characters and quotes in caller ID
or caller name strings with ' ' - safeguard for passing them to
shell later on.
* doc/mgetty.texi-in: add stuff about recent multitech modems,
superfine+v.34 fax, and rework chapter about common problems
* faxlib.c: fix ugliness with USR modems reporting remote fax
ID as " 12345" -> skip leading '"' and all whitespace
* cnd.c: possible buffer overrun via CallName
(found by "A. Guru" <a.guru@sympatico.ca>)
* fax/faxrunqd: fix priority vs. write combining bug
* login.c: check for close-on-exec bit on FD 0 (FreeBSD 4.1 bug)
* login.c: export Caller Name as environment variable $CALLER_NAME
* login.c: make message about bad permissions even more clear
2003-09-20 18:39:33 +02:00
|
|
|
--- doc/fax.1in.orig
|
2003-02-27 18:13:37 +01:00
|
|
|
+++ doc/fax.1in
|
2002-03-06 20:19:02 +01:00
|
|
|
@@ -1,7 +1,7 @@
|
Update to 1.1.30, submitted by Stephane Fortier in PR pkg/22867.
"ChangeLog" since 1.1.28 w/dates and blank lines elided:
* release 1.1.30
* voice/vgetty/answer.c, voice/include/default.c: integrate Paul
Fox' pre_message and beep_sound patches
* voice/libvoice/detect.c: recognize MultiTech MT3334ZDXV
* faxhng.c: add some result codes for the i4l DIVA driver
* voice/libvoice/IS_101.c: fix DTMF events for the unshielded case
* voice/vgetty/answer.c: accept arbitrary ring types, not only 0..6
* ring.c: map DRON/DROF return codes to binary word, use result
as distinctive RING number
* frontends/www/README: add user authentication example
* voice/libvoice/V253modem.c: repair messed-up 16 bit PCM patch
* release 1.1.29
* voice/libvoice/detect.c: insert delay before sending ATE0 to
modem (timing issue - modem might not have sent the full \r\n
sequence from the last "OK" yet when the new AT comes in)
* doc/*.[158]in: bring man pages up to date
* tools/ltest.c, tools/mid.c: adapt to new lprintf() prototype
* mgetty.h, logfile.c: adapt to use <stdarg.h> and "..."
function declaration (unless USE_VARARGS is set, which is
needed for NeXT platforms). Karsten Keil <kkeil@suse.de>.
* Makefile: relax permissions on sendfax and faxrunq.config
install - must be readable/executeable by user "fax" now
* doc/faxrunqd.8in: document "-u", minor updates
* fax/faxrunqd.in, fax/faxspool.in, fax/faxrunq.in: revert
Aug 6, 200 change - put faxqueue_done back into $FAX_SPOOL_OUT/
(faxrunq/faxrunqd have no access rights to $VARRUNDIR/ anymore,
and $FAX_SPOOL_OUT is no longer world writeable anyway)
* fax/faxq.in: change from .last_run to faxqueue_done
* fax/faxrunqd.in: add "-u <user>" switch (set uid to <user>)
* fax/faxq-helper.c: finalize new fax queue handling using helper
process (suid fax) and a fax queue that is no longer
world-readable (open issue since 1994 :) )
* faxrecp.c: implement experimental teergrubing mode (signal
"page bad, please retransmit" at the end of each page - or just
hang up hard on caller). Activared with "modem-quirks 0x100"
or "0x200", respectively.
* voice/libvoice/V253Modem.c: add 16 bit linear PCM support
(patch coming from Peter Bruley)
* voice/pvftools/pvftormd.c, rmdtopvf.c: add 16 bit linear PCM
* rework faxq-helper concept (suid root -> suid fax)
* fax/faxq.in: adap "-r" to use faxq-helper
* fax/faxspool.in: adapt to use faxq-helper
* fax/faxrm.in: adapt to use faxq-helper
* Makefile: create FAX_SPOOL_OUT with mode 755 and owner FAX_OUT_USER
* Makefile: add FAX_OUT_USER definition, pass lots of variables
to fax/Makefile (for faxq-helper)
* README.1st: add instructions about FAX_OUT_USER setup
* doc/mgetty.texi-in add instructions about FAX_OUT_USER setup
* fax/faxrunqd.in: fix symlink / file overwrite race in JOB files.
Pointed out by Jablonovsky Alexander <sasha@cit-saratov.ru>
* doc/faxrunq.8in: point out insecurity in symlink handling
* mgetty.h: Intel 64bit platforms (__x86_64__) needs PTR_IS_LONG
* voice/libvoice/IS_101.c: implement DLE shielding for long DTMF tones
for V.253 (initially by Lee Howard <faxguy@howardsilvan.com>)
* mgetty.c: throw out DIST_RING #define - not used anymore
* ring.c: make sure action strings (CONNECT) are only recognized
at the beginning if a line, not in the middle (Paul Fox,
pgf@foxharp.boston.ma.us, CALLER NAME = CONNECTICUT).
* cnd.c: replace non-printable characters and quotes in caller ID
or caller name strings with ' ' - safeguard for passing them to
shell later on.
* doc/mgetty.texi-in: add stuff about recent multitech modems,
superfine+v.34 fax, and rework chapter about common problems
* faxlib.c: fix ugliness with USR modems reporting remote fax
ID as " 12345" -> skip leading '"' and all whitespace
* cnd.c: possible buffer overrun via CallName
(found by "A. Guru" <a.guru@sympatico.ca>)
* fax/faxrunqd: fix priority vs. write combining bug
* login.c: check for close-on-exec bit on FD 0 (FreeBSD 4.1 bug)
* login.c: export Caller Name as environment variable $CALLER_NAME
* login.c: make message about bad permissions even more clear
2003-09-20 18:39:33 +02:00
|
|
|
-.TH fax 1 "23 Nov 02" "greenie" "mgetty+sendfax manual"
|
|
|
|
|
+.TH sendfax 1 "23 Nov 02" "greenie" "mgetty+sendfax manual"
|
2002-03-06 20:19:02 +01:00
|
|
|
.IX fax
|
|
|
|
|
.SH NAME
|
|
|
|
|
-fax \- fax sending and receiving with mgetty+sendfax
|
|
|
|
|
+sendfax \- fax sending and receiving with mgetty+sendfax
|
|
|
|
|
.SH SYNOPSIS
|
|
|
|
|
.B faxspool
|
|
|
|
|
.RB [options]
|