kpriv/pkgsrc
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
pkgsrc/cross/avrdude/Makefile

55 lines
1.8 KiB
Makefile
Raw Normal View History

Revbump for packages depending on devel/libusb{,compat}
2018-02-28 00:56:07 +01:00
# $NetBSD: Makefile,v 1.44 2018/02/27 23:56:08 khorben Exp $
avrdude - Program for programming the on-chip memory of Atmel AVR CPUs Submitted by Karl Janmar <karlj@mdstud.chalmers.se> in PR 22139, with several changes by myself. Original package from FreeBSD.
2003-07-17 21:09:23 +02:00
Updated cross/avrdude to 6.3 ---------------------------- Version 6.3: * Major changes compared to the previous version: - Backout of patch #8380: adds 500k 1M 2M baud to ser_posix.c It broke the functionality in too many situations (bug #46610/46483) * New devices supported: - ATmega48PB, ATmega88PB, ATmega168PB - ATtiny28 (HVPP-only device) * New programmers supported: - Atmel mEDBG: xplainedmini, xplainedmini_dw * Bugfixes - bug #46610: Floating point exception (core dumped) arch linux rpi2 - bug #46483: version 6.2. ser_open(): can't set attributes for device - patch #8435: Implementing mEDBG CMSIS-DAP protocol - patch #8735: ATtiny28 support in avrdude.conf - patch #8896: Silence cppcheck warnings in 6.2 code - patch #8895: Spelling in 6.2 code Version 6.2: * Major changes compared to the previous version: - The stk500v2 implementation now uses its own higher-level command implementation for byte-wide access, rather than the historic SPI_MULTI command where all the low-level ISP implementation had to be assembled manually inside AVRDUDE. In addition to the traditional STK500, this implementation is also used by all the more modern Atmel tools (AVRISPmkII, JTAGICEmkII in ISP mode, STK600 in ISP mode). - The -B option can be suffixed with "Hz", "kHz", or "MHz", in order to specify a bitclock frequency rather than period. - Print part id after signature (patch #8440 ) - buspirate: Also support "cpufreq" extended parameter in binary mode (patch #8504 ) - The "-P net:" syntax (forwarding of serial data over TCP) is now also implemented for Win32 systems. - Allow for arbitrary serial baudrates under Linux (OSX and *BSD could already handle it). * New devices supported: - AT90PWM216 (bug #42310: New part description for AT90PWM216) - ATmega32M1 (patch #7694 Add support for the atmega32m1) * New programmers supported: - ftdi_syncbb + uncompatino, ttl232r (FTDI TTL232R-5V with ICSP adapter) (patch #8529 2 more ftdi_syncbb devices) * Bugfixes - bug #45727: Wrong atmega8u2 flash parameters - bug #46020: Add TIAO TUMPA to the conf file. - bug #46021: Please add read in the memory lock section of ATtiny85 - bug #42337 avrdude.conf updates for UM232H/CM232H - bug #42056: double free or corruption triggered at exit - bug #42158: Linux GPIO - Source Typo - bug #42516 spelling-error-in-binary - patch #8419 fix ftdi_syncbb hang with libftdi 1 - bug #43002 usbasp debug output typo - patch #8511 Fix reset on FT245R - bug #40142 Floating point exception on Ubuntu 10.04 - bug #22248: Read efuse error (partial fix) - bug #42267: jtag3isp fails to read lock and fuse bytes directly after changing lock byte - bug #41561: AVRDUDE 6.0.1/USBasp doesn't write first bytes of flash page - bug #43078: AVRDUDE crashes after sucessfully reading/writing eeprom - bug #43137: Writing and reading incorrect pages when using jtagicemkI - bug #40870: config nitpick: ATtiny25/45/85 have 1 calibration byte not 2 - bug #42908: no external reset at JTAGICE3 - patch #8437: [PATCH] Serial-over-ethernet for Win32 - bug #44717: avrdude creates empty flash dump * Internals: - Removing exit calls from config parser - bug #42662 clang warnings under FreeBSD 10.x
2017-01-29 03:24:54 +01:00
DISTNAME= avrdude-6.3
Revbump for packages depending on devel/libusb{,compat}
2018-02-28 00:56:07 +01:00
PKGREVISION= 1
Update avrdude to version 5.2. Significant enhancements in this version are: o Support for JTAGICE MkII device o New devices supported: - AT90CAN128 ... o Support for STK500 Version 2 Protocol (the latter being the principal reason for the update, as the recent firmware on the STK500 development boards requires protocol version 2)
2006-12-11 17:26:39 +01:00
CATEGORIES= cross
MASTER_SITES= http://download.savannah.gnu.org/releases/avrdude/
avrdude - Program for programming the on-chip memory of Atmel AVR CPUs Submitted by Karl Janmar <karlj@mdstud.chalmers.se> in PR 22139, with several changes by myself. Original package from FreeBSD.
2003-07-17 21:09:23 +02:00
Update avrdude to version 5.2. Significant enhancements in this version are: o Support for JTAGICE MkII device o New devices supported: - AT90CAN128 ... o Support for STK500 Version 2 Protocol (the latter being the principal reason for the update, as the recent firmware on the STK500 development boards requires protocol version 2)
2006-12-11 17:26:39 +01:00
MAINTAINER= pkgsrc-users@NetBSD.org
PR/45924 --- update to 5.11 with minor changes (1) update 5.10 to 5.11 (2) Trying to remove pkglint -Wall warning (3) Update HOMEPAGE URL ----- ----- ----- AVRDUDE 5.11 relesed (2011/8/27 By joerg_wunsch) Finally, more than 1.5 years after the previous release, AVRDUDE 5.11 is finally done. This is mostly a bugfix release, but also includes a few enhancements. The two most important enhancements are: - TPI (i.e. ATtiny4/5/9/10) programming support for bitbang programmers. - FTDI MPSSE (FT2232 etc.) bitbang support. ----- ----- -----
2012-02-07 01:21:48 +01:00
HOMEPAGE= http://www.nongnu.org/avrdude/
Update avrdude to version 5.2. Significant enhancements in this version are: o Support for JTAGICE MkII device o New devices supported: - AT90CAN128 ... o Support for STK500 Version 2 Protocol (the latter being the principal reason for the update, as the recent firmware on the STK500 development boards requires protocol version 2)
2006-12-11 17:26:39 +01:00
COMMENT= Downloader/uploader for Atmel AVR 8-bit RISC microcontrollers
Work around AVRISP mkII sync timeout/retry on NetBSD. I'm guessing this is really a oddity of NetBSD's USB stack, but this seems to work too. Also, hello nb2 and set LICENSE. (This commit bumps most of the patch files only because of pkgdiff timestamp formatting differences. Sigh.)
2010-01-26 03:01:47 +01:00
LICENSE= gnu-gpl-v2
avrdude - Program for programming the on-chip memory of Atmel AVR CPUs Submitted by Karl Janmar <karlj@mdstud.chalmers.se> in PR 22139, with several changes by myself. Original package from FreeBSD.
2003-07-17 21:09:23 +02:00
(Upstream) Bump version 5.11 to 6.0.1 ---------------------------------------------------------------------- Version 6.0.1: * Major changes compared to the previous version: - Programmer types in configuration file are no longer keywords but specified as string. So you need to change 'type = XYZ;' to 'type = "XYZ";' in own config files. (internal: The parser does not need to know all programmer types now, new programmers will update only the table in pgm_type.c.) - The erase cycle counter (formerly options -y / -Y) has been removed. - Specifying a -U option without a memory type (short form of option argument list) now defaults to "application" memory for Xmega devices, and "flash" for everything else. This ensures the Xmega bootloader is not accidentally touched. - For programmers that support it, the default erase method is a page erase now, rather than a chip erase (Xmega only). - Keep track of input file contents Memory segments are being tracked to remember whether they've been actually read from a file. Only segments that came from a file are being programmed into the device, or considered for verification. This drastically improves handling speed for sparse files (e.g. files that have a second bootloader segment), and it ensures the device contents is actually compared for everything mentioned in the file (even in case the file has large 0xFF blocks). - The -U option now accepts ELF files as input files, and extracts the appropriate section contents that matches the requested memory region. To enable this feature, the host system used for the compilation must have a libelf around, including the respective header files (i.e., package "libelf-devel" on many Linux systems). - Programmers and parts lists They are now sorted at output with '-c ?'/'-p ?'. (patch #7671: Sorting programmers and parts lists for console output) Programmers and parts lists in documentation generated from lists mentioned above. (patch #7687: Autogenerating programmers and parts lists for docs) Output list of programmer types with '-c ?type', add list to documentation - Configuration files now accepts parent parts/programmers, parts starting with '.' (eg. .xmega) are not included in output parts list and can be used as abstract parents (bug #34302: Feature request : device configuration with parent classes) (patch #7688: Implement parent programmers feature) - Additional config files which are read after default can be specified on command line using '-C +filename' (patch #7699 Read additional config files) - "Safemode" can now be turned off by default from within a configuration file (like ~/.avrduderc). - The new option -l logfile allows to redirect diagnostic messages to a logfile rather than stderr. Useful to record debugging traces, in particular in environments which do not offer shell-style redirection functionality for standard streams. - When leaving debugWIRE mode, immediately retry with ISP rather than bailing out completely. - The USBasp programmer implementation now supports detailed traces with -vvv, and device communication traces with -vvvv. - The "verbose" terminal mode command allows to query or modify the verbosity level. * New devices supported: - ATmega48P (patch #7629 add support for atmega48p) - AT90PWM316 (bug #21797: AT90PWM316: New part description) - ATxmega16D4, ATxmega32D4, ATxmega64D4, ATxmega128D4 - ATmega256RFR2, ATmega128RFR2, ATmega64RFR2, ATmega2564RFR2, ATmega1284RFR2, ATmega644RFR2 - ATtiny1634 - ATxmega128A1U, ATxmega128A3U, ATxmega128A4U, ATxmega128B1, ATxmega128B3, ATxmega128C3, ATxmega128D3, ATxmega16A4U, ATxmega16C4, ATxmega192A3U, ATxmega192C3, ATxmega192D3, ATxmega256A3BU, ATxmega256A3U, ATxmega256C3, ATxmega256D3, ATxmega32A4U, ATxmega32C4, ATxmega384C3, ATxmega384D3, ATxmega64A1U, ATxmega64A3U, ATxmega64A4U, ATxmega64B1, ATxmega64B3, ATxmega64C3, ATxmega64D3 - ATtiny43U - ATmega406 - ATxmega8E5, ATxmega16E5, ATxmega32E5 - ATtiny20, ATtiny40 * New programmers supported: - linuxgpio + any (embedded) Linux system with 4 GPIOs available can be used as a programmer with little or no additional hardware. - avrftdi + o-link (patch #7672 adding support for O-Link (FTDI based JTAG) as programmer) + 4232h (patch #7715 FT4232H support) - TPI support + openmoko (bug #37977 Support for Openmoko Debug Board) - usbasp + nibobee (previously specified as '-c usbasp -P nibobee) + usbasp-clone (same as usbasp but ignores vendor and product string, checks only vid/pid) - ftdi_syncbb (new type for synchronous bitbanging with ft232r/ft245r) + ft245r (FT245R Synchronous BitBang, miso = D1, sck = D0, mosi = D2, reset = D4) + ft232r (FT232R Synchronous BitBang, miso = RxD, sck = RTS, mosi = TxD, reset = DTR) + bwmega (BitWizard ftdi_atmega builtin programmer, miso = DSR, sck = DCD, mosi = CTS, reset = RI) + arduino-ft232r (Arduino: FT232R connected to ISP, miso = CTS X3(1), sck = DSR X3(2), mosi = DCD X3(3), reset = RI X3(4)) + diecimila (alias for arduino-ft232r) - pickit2 - Atmel JTAGICE3 - buspirate_bb (TPI programming using the BusPirate in bitbang mode) * Bugfixes - bug #34027: avrdude AT90S1200 Problem - bug #34518: loading intel hex files > 64k using record-type 4 - patch #7667: Minor memory handling fixes - patch #7680: Fixing timeout problem in ser_recv in ser_win32.c - patch #7693: Fix config file atmel URLs (+ URLs in avrdude.texi and avrpart.h) - bug #21663: AT90PWM efuse incorrect, bug #30438: efuse bits written as 0 on at90pwmxx parts - bug #35261: avrftdi uses wrong interface in avrftdi_paged_(write|load) - patch #7437 modifications to Bus Pirate module - patch #7686 Updating buspirate ascii mode to current firmware, use AUX as clock generator, and setting of serial receive timeout - bug #34768 Proposition: Change the name of the AVR32 devices - patch #7718: Merge global data of avrftdi in a private data structure - bug #35208: avrdude 5.11 on freebsd 8.2-STABLE does not reset Arduino Uno properly - bug #34518: loading intel hex files > 64k using record-type 4 (Extended Linear Address Record) - bug #34027: avrdude AT90S1200 Problem - bug #30451: Accessing some Xmega memory sections gives not supported error - bug #28744: Can't load bootloader to xmega128a1 - bug #29019: pagel/bs2 warning when uploading using stk500 to xmega - bug #30756: When setting SUT to 64ms on XMEGA, avrdude doesn't read device signature - bug #37265: wrong page sizes for XMega64xx in avrdude.conf - bug #37942: Latest SVN can't program in dragon_jtag mode - patch #7876 JTAGICE mkII fails to connect to attiny if debugwire is enabled AND target has a very slow clock - bug #39893: Verification failure with AVRISPmkII and Xmega - bug #38713: Compilation of the documentation breaks with texinfo-5 - bug #38023: avrdude doesn't return an error code when attempting to upload an invalid Intel HEX file - bug #39794: warnings when building avrdude 6.0rc1 under CentOS 6.4 - bug #35800: Compilation error on certain systems if parport is disabled - bug #38307: Can't write usersig of an xmega256a3 - bug #38580: Current svn head, xmega and fuses, all fuses tied to fuse0 - bug #39691: Buffer overrun when reading EEPROM byte with JTAGICE3 - bug #38951: AVR109 use byte offset instead of word offset - patch #7769: Write flash fails for AVR910 programmers - bug #38732: Support for ATtiny1634 - bug #36901: flashing Atmega32U4 EEPROM produces garbage on chip - bug #28344: chip_erase_delay too short for ATmega324P, 644, 644P, and 1284P - bug #34277: avrdude reads wrong byte order if using avr911 (aka butterfly) - bug #35456: The progress bar for STK500V2 programmer is "wrong". - patch #5708: avrdude should make 10 synchronization attempts instead of just one - patch #7606: ATtiny43u support - patch #7657: Add ATmega406 support for avrdude using DRAGON + JTAG - bug #35474: Feature request: print fuse values in safemode output. - patch #7710: usb_libusb: Check VID/PID before opening device - [no-id]: Fix SCK period adjustment for STK500v2 - bug #40040: Support for ATtiny20 and ATtiny40 - bug #40055: AVRDUDE segfaults when writing eeprom
2013-12-06 08:23:55 +01:00
BUILD_DEPENDS+= dvipsk-[0-9]*:../../print/dvipsk
BUILD_DEPENDS+= tex-latex-fonts-[0-9]*:../../fonts/tex-latex-fonts
BUILD_DEPENDS+= tex-pdftex-[0-9]*:../../print/tex-pdftex
Let avrdude depend on dvipsk because teTeX-bin no longer provides dvips.
2009-02-25 18:20:27 +01:00
(Upstream) Bump version 5.11 to 6.0.1 ---------------------------------------------------------------------- Version 6.0.1: * Major changes compared to the previous version: - Programmer types in configuration file are no longer keywords but specified as string. So you need to change 'type = XYZ;' to 'type = "XYZ";' in own config files. (internal: The parser does not need to know all programmer types now, new programmers will update only the table in pgm_type.c.) - The erase cycle counter (formerly options -y / -Y) has been removed. - Specifying a -U option without a memory type (short form of option argument list) now defaults to "application" memory for Xmega devices, and "flash" for everything else. This ensures the Xmega bootloader is not accidentally touched. - For programmers that support it, the default erase method is a page erase now, rather than a chip erase (Xmega only). - Keep track of input file contents Memory segments are being tracked to remember whether they've been actually read from a file. Only segments that came from a file are being programmed into the device, or considered for verification. This drastically improves handling speed for sparse files (e.g. files that have a second bootloader segment), and it ensures the device contents is actually compared for everything mentioned in the file (even in case the file has large 0xFF blocks). - The -U option now accepts ELF files as input files, and extracts the appropriate section contents that matches the requested memory region. To enable this feature, the host system used for the compilation must have a libelf around, including the respective header files (i.e., package "libelf-devel" on many Linux systems). - Programmers and parts lists They are now sorted at output with '-c ?'/'-p ?'. (patch #7671: Sorting programmers and parts lists for console output) Programmers and parts lists in documentation generated from lists mentioned above. (patch #7687: Autogenerating programmers and parts lists for docs) Output list of programmer types with '-c ?type', add list to documentation - Configuration files now accepts parent parts/programmers, parts starting with '.' (eg. .xmega) are not included in output parts list and can be used as abstract parents (bug #34302: Feature request : device configuration with parent classes) (patch #7688: Implement parent programmers feature) - Additional config files which are read after default can be specified on command line using '-C +filename' (patch #7699 Read additional config files) - "Safemode" can now be turned off by default from within a configuration file (like ~/.avrduderc). - The new option -l logfile allows to redirect diagnostic messages to a logfile rather than stderr. Useful to record debugging traces, in particular in environments which do not offer shell-style redirection functionality for standard streams. - When leaving debugWIRE mode, immediately retry with ISP rather than bailing out completely. - The USBasp programmer implementation now supports detailed traces with -vvv, and device communication traces with -vvvv. - The "verbose" terminal mode command allows to query or modify the verbosity level. * New devices supported: - ATmega48P (patch #7629 add support for atmega48p) - AT90PWM316 (bug #21797: AT90PWM316: New part description) - ATxmega16D4, ATxmega32D4, ATxmega64D4, ATxmega128D4 - ATmega256RFR2, ATmega128RFR2, ATmega64RFR2, ATmega2564RFR2, ATmega1284RFR2, ATmega644RFR2 - ATtiny1634 - ATxmega128A1U, ATxmega128A3U, ATxmega128A4U, ATxmega128B1, ATxmega128B3, ATxmega128C3, ATxmega128D3, ATxmega16A4U, ATxmega16C4, ATxmega192A3U, ATxmega192C3, ATxmega192D3, ATxmega256A3BU, ATxmega256A3U, ATxmega256C3, ATxmega256D3, ATxmega32A4U, ATxmega32C4, ATxmega384C3, ATxmega384D3, ATxmega64A1U, ATxmega64A3U, ATxmega64A4U, ATxmega64B1, ATxmega64B3, ATxmega64C3, ATxmega64D3 - ATtiny43U - ATmega406 - ATxmega8E5, ATxmega16E5, ATxmega32E5 - ATtiny20, ATtiny40 * New programmers supported: - linuxgpio + any (embedded) Linux system with 4 GPIOs available can be used as a programmer with little or no additional hardware. - avrftdi + o-link (patch #7672 adding support for O-Link (FTDI based JTAG) as programmer) + 4232h (patch #7715 FT4232H support) - TPI support + openmoko (bug #37977 Support for Openmoko Debug Board) - usbasp + nibobee (previously specified as '-c usbasp -P nibobee) + usbasp-clone (same as usbasp but ignores vendor and product string, checks only vid/pid) - ftdi_syncbb (new type for synchronous bitbanging with ft232r/ft245r) + ft245r (FT245R Synchronous BitBang, miso = D1, sck = D0, mosi = D2, reset = D4) + ft232r (FT232R Synchronous BitBang, miso = RxD, sck = RTS, mosi = TxD, reset = DTR) + bwmega (BitWizard ftdi_atmega builtin programmer, miso = DSR, sck = DCD, mosi = CTS, reset = RI) + arduino-ft232r (Arduino: FT232R connected to ISP, miso = CTS X3(1), sck = DSR X3(2), mosi = DCD X3(3), reset = RI X3(4)) + diecimila (alias for arduino-ft232r) - pickit2 - Atmel JTAGICE3 - buspirate_bb (TPI programming using the BusPirate in bitbang mode) * Bugfixes - bug #34027: avrdude AT90S1200 Problem - bug #34518: loading intel hex files > 64k using record-type 4 - patch #7667: Minor memory handling fixes - patch #7680: Fixing timeout problem in ser_recv in ser_win32.c - patch #7693: Fix config file atmel URLs (+ URLs in avrdude.texi and avrpart.h) - bug #21663: AT90PWM efuse incorrect, bug #30438: efuse bits written as 0 on at90pwmxx parts - bug #35261: avrftdi uses wrong interface in avrftdi_paged_(write|load) - patch #7437 modifications to Bus Pirate module - patch #7686 Updating buspirate ascii mode to current firmware, use AUX as clock generator, and setting of serial receive timeout - bug #34768 Proposition: Change the name of the AVR32 devices - patch #7718: Merge global data of avrftdi in a private data structure - bug #35208: avrdude 5.11 on freebsd 8.2-STABLE does not reset Arduino Uno properly - bug #34518: loading intel hex files > 64k using record-type 4 (Extended Linear Address Record) - bug #34027: avrdude AT90S1200 Problem - bug #30451: Accessing some Xmega memory sections gives not supported error - bug #28744: Can't load bootloader to xmega128a1 - bug #29019: pagel/bs2 warning when uploading using stk500 to xmega - bug #30756: When setting SUT to 64ms on XMEGA, avrdude doesn't read device signature - bug #37265: wrong page sizes for XMega64xx in avrdude.conf - bug #37942: Latest SVN can't program in dragon_jtag mode - patch #7876 JTAGICE mkII fails to connect to attiny if debugwire is enabled AND target has a very slow clock - bug #39893: Verification failure with AVRISPmkII and Xmega - bug #38713: Compilation of the documentation breaks with texinfo-5 - bug #38023: avrdude doesn't return an error code when attempting to upload an invalid Intel HEX file - bug #39794: warnings when building avrdude 6.0rc1 under CentOS 6.4 - bug #35800: Compilation error on certain systems if parport is disabled - bug #38307: Can't write usersig of an xmega256a3 - bug #38580: Current svn head, xmega and fuses, all fuses tied to fuse0 - bug #39691: Buffer overrun when reading EEPROM byte with JTAGICE3 - bug #38951: AVR109 use byte offset instead of word offset - patch #7769: Write flash fails for AVR910 programmers - bug #38732: Support for ATtiny1634 - bug #36901: flashing Atmega32U4 EEPROM produces garbage on chip - bug #28344: chip_erase_delay too short for ATmega324P, 644, 644P, and 1284P - bug #34277: avrdude reads wrong byte order if using avr911 (aka butterfly) - bug #35456: The progress bar for STK500V2 programmer is "wrong". - patch #5708: avrdude should make 10 synchronization attempts instead of just one - patch #7606: ATtiny43u support - patch #7657: Add ATmega406 support for avrdude using DRAGON + JTAG - bug #35474: Feature request: print fuse values in safemode output. - patch #7710: usb_libusb: Check VID/PID before opening device - [no-id]: Fix SCK period adjustment for STK500v2 - bug #40040: Support for ATtiny20 and ATtiny40 - bug #40055: AVRDUDE segfaults when writing eeprom
2013-12-06 08:23:55 +01:00
# make: make: don't know how to make ./libavrdude.a. Stop
Not MAKE_JOBS_SAFE.
2010-01-04 17:30:36 +01:00
MAKE_JOBS_SAFE= no
Add DESTDIR support.
2008-06-12 04:14:13 +02:00
Update avrdude to version 5.2. Significant enhancements in this version are: o Support for JTAGICE MkII device o New devices supported: - AT90CAN128 ... o Support for STK500 Version 2 Protocol (the latter being the principal reason for the update, as the recent firmware on the STK500 development boards requires protocol version 2)
2006-12-11 17:26:39 +01:00
.include "../../mk/bsd.prefs.mk"
Use GNU_CONFIGURE and fix its arguments accordingly. Handle info files properly.
2003-08-07 16:00:35 +02:00
Update avrdude to version 5.2. Significant enhancements in this version are: o Support for JTAGICE MkII device o New devices supported: - AT90CAN128 ... o Support for STK500 Version 2 Protocol (the latter being the principal reason for the update, as the recent firmware on the STK500 development boards requires protocol version 2)
2006-12-11 17:26:39 +01:00
GNU_CONFIGURE= yes
Fix for automake-1.13.
2013-01-26 23:07:42 +01:00
TEXINFO_REQD= 4.9
Update to 5.8. Upstream changelog is obviously too massive to paste it here. All hard update work done by Simon 'corecode' Schubert and minor modifications by me.
2009-08-27 17:34:48 +02:00
USE_TOOLS+= autoconf automake autoreconf makeinfo texi2html yacc lex
Requires libtool.
2017-02-21 17:05:53 +01:00
USE_LIBTOOL= yes
Update avrdude to version 5.2. Significant enhancements in this version are: o Support for JTAGICE MkII device o New devices supported: - AT90CAN128 ... o Support for STK500 Version 2 Protocol (the latter being the principal reason for the update, as the recent firmware on the STK500 development boards requires protocol version 2)
2006-12-11 17:26:39 +01:00
INFO_FILES= yes
EGDIR= ${PREFIX}/share/examples/avrdude
(Upstream) Bump version 5.11 to 6.0.1 ---------------------------------------------------------------------- Version 6.0.1: * Major changes compared to the previous version: - Programmer types in configuration file are no longer keywords but specified as string. So you need to change 'type = XYZ;' to 'type = "XYZ";' in own config files. (internal: The parser does not need to know all programmer types now, new programmers will update only the table in pgm_type.c.) - The erase cycle counter (formerly options -y / -Y) has been removed. - Specifying a -U option without a memory type (short form of option argument list) now defaults to "application" memory for Xmega devices, and "flash" for everything else. This ensures the Xmega bootloader is not accidentally touched. - For programmers that support it, the default erase method is a page erase now, rather than a chip erase (Xmega only). - Keep track of input file contents Memory segments are being tracked to remember whether they've been actually read from a file. Only segments that came from a file are being programmed into the device, or considered for verification. This drastically improves handling speed for sparse files (e.g. files that have a second bootloader segment), and it ensures the device contents is actually compared for everything mentioned in the file (even in case the file has large 0xFF blocks). - The -U option now accepts ELF files as input files, and extracts the appropriate section contents that matches the requested memory region. To enable this feature, the host system used for the compilation must have a libelf around, including the respective header files (i.e., package "libelf-devel" on many Linux systems). - Programmers and parts lists They are now sorted at output with '-c ?'/'-p ?'. (patch #7671: Sorting programmers and parts lists for console output) Programmers and parts lists in documentation generated from lists mentioned above. (patch #7687: Autogenerating programmers and parts lists for docs) Output list of programmer types with '-c ?type', add list to documentation - Configuration files now accepts parent parts/programmers, parts starting with '.' (eg. .xmega) are not included in output parts list and can be used as abstract parents (bug #34302: Feature request : device configuration with parent classes) (patch #7688: Implement parent programmers feature) - Additional config files which are read after default can be specified on command line using '-C +filename' (patch #7699 Read additional config files) - "Safemode" can now be turned off by default from within a configuration file (like ~/.avrduderc). - The new option -l logfile allows to redirect diagnostic messages to a logfile rather than stderr. Useful to record debugging traces, in particular in environments which do not offer shell-style redirection functionality for standard streams. - When leaving debugWIRE mode, immediately retry with ISP rather than bailing out completely. - The USBasp programmer implementation now supports detailed traces with -vvv, and device communication traces with -vvvv. - The "verbose" terminal mode command allows to query or modify the verbosity level. * New devices supported: - ATmega48P (patch #7629 add support for atmega48p) - AT90PWM316 (bug #21797: AT90PWM316: New part description) - ATxmega16D4, ATxmega32D4, ATxmega64D4, ATxmega128D4 - ATmega256RFR2, ATmega128RFR2, ATmega64RFR2, ATmega2564RFR2, ATmega1284RFR2, ATmega644RFR2 - ATtiny1634 - ATxmega128A1U, ATxmega128A3U, ATxmega128A4U, ATxmega128B1, ATxmega128B3, ATxmega128C3, ATxmega128D3, ATxmega16A4U, ATxmega16C4, ATxmega192A3U, ATxmega192C3, ATxmega192D3, ATxmega256A3BU, ATxmega256A3U, ATxmega256C3, ATxmega256D3, ATxmega32A4U, ATxmega32C4, ATxmega384C3, ATxmega384D3, ATxmega64A1U, ATxmega64A3U, ATxmega64A4U, ATxmega64B1, ATxmega64B3, ATxmega64C3, ATxmega64D3 - ATtiny43U - ATmega406 - ATxmega8E5, ATxmega16E5, ATxmega32E5 - ATtiny20, ATtiny40 * New programmers supported: - linuxgpio + any (embedded) Linux system with 4 GPIOs available can be used as a programmer with little or no additional hardware. - avrftdi + o-link (patch #7672 adding support for O-Link (FTDI based JTAG) as programmer) + 4232h (patch #7715 FT4232H support) - TPI support + openmoko (bug #37977 Support for Openmoko Debug Board) - usbasp + nibobee (previously specified as '-c usbasp -P nibobee) + usbasp-clone (same as usbasp but ignores vendor and product string, checks only vid/pid) - ftdi_syncbb (new type for synchronous bitbanging with ft232r/ft245r) + ft245r (FT245R Synchronous BitBang, miso = D1, sck = D0, mosi = D2, reset = D4) + ft232r (FT232R Synchronous BitBang, miso = RxD, sck = RTS, mosi = TxD, reset = DTR) + bwmega (BitWizard ftdi_atmega builtin programmer, miso = DSR, sck = DCD, mosi = CTS, reset = RI) + arduino-ft232r (Arduino: FT232R connected to ISP, miso = CTS X3(1), sck = DSR X3(2), mosi = DCD X3(3), reset = RI X3(4)) + diecimila (alias for arduino-ft232r) - pickit2 - Atmel JTAGICE3 - buspirate_bb (TPI programming using the BusPirate in bitbang mode) * Bugfixes - bug #34027: avrdude AT90S1200 Problem - bug #34518: loading intel hex files > 64k using record-type 4 - patch #7667: Minor memory handling fixes - patch #7680: Fixing timeout problem in ser_recv in ser_win32.c - patch #7693: Fix config file atmel URLs (+ URLs in avrdude.texi and avrpart.h) - bug #21663: AT90PWM efuse incorrect, bug #30438: efuse bits written as 0 on at90pwmxx parts - bug #35261: avrftdi uses wrong interface in avrftdi_paged_(write|load) - patch #7437 modifications to Bus Pirate module - patch #7686 Updating buspirate ascii mode to current firmware, use AUX as clock generator, and setting of serial receive timeout - bug #34768 Proposition: Change the name of the AVR32 devices - patch #7718: Merge global data of avrftdi in a private data structure - bug #35208: avrdude 5.11 on freebsd 8.2-STABLE does not reset Arduino Uno properly - bug #34518: loading intel hex files > 64k using record-type 4 (Extended Linear Address Record) - bug #34027: avrdude AT90S1200 Problem - bug #30451: Accessing some Xmega memory sections gives not supported error - bug #28744: Can't load bootloader to xmega128a1 - bug #29019: pagel/bs2 warning when uploading using stk500 to xmega - bug #30756: When setting SUT to 64ms on XMEGA, avrdude doesn't read device signature - bug #37265: wrong page sizes for XMega64xx in avrdude.conf - bug #37942: Latest SVN can't program in dragon_jtag mode - patch #7876 JTAGICE mkII fails to connect to attiny if debugwire is enabled AND target has a very slow clock - bug #39893: Verification failure with AVRISPmkII and Xmega - bug #38713: Compilation of the documentation breaks with texinfo-5 - bug #38023: avrdude doesn't return an error code when attempting to upload an invalid Intel HEX file - bug #39794: warnings when building avrdude 6.0rc1 under CentOS 6.4 - bug #35800: Compilation error on certain systems if parport is disabled - bug #38307: Can't write usersig of an xmega256a3 - bug #38580: Current svn head, xmega and fuses, all fuses tied to fuse0 - bug #39691: Buffer overrun when reading EEPROM byte with JTAGICE3 - bug #38951: AVR109 use byte offset instead of word offset - patch #7769: Write flash fails for AVR910 programmers - bug #38732: Support for ATtiny1634 - bug #36901: flashing Atmega32U4 EEPROM produces garbage on chip - bug #28344: chip_erase_delay too short for ATmega324P, 644, 644P, and 1284P - bug #34277: avrdude reads wrong byte order if using avr911 (aka butterfly) - bug #35456: The progress bar for STK500V2 programmer is "wrong". - patch #5708: avrdude should make 10 synchronization attempts instead of just one - patch #7606: ATtiny43u support - patch #7657: Add ATmega406 support for avrdude using DRAGON + JTAG - bug #35474: Feature request: print fuse values in safemode output. - patch #7710: usb_libusb: Check VID/PID before opening device - [no-id]: Fix SCK period adjustment for STK500v2 - bug #40040: Support for ATtiny20 and ATtiny40 - bug #40055: AVRDUDE segfaults when writing eeprom
2013-12-06 08:23:55 +01:00
CONF_FILES_PERMS= ${EGDIR}/avrdude.conf ${PKG_SYSCONFDIR}/avrdude.conf \
${REAL_ROOT_USER} ${REAL_ROOT_GROUP} 644
avrdude - Program for programming the on-chip memory of Atmel AVR CPUs Submitted by Karl Janmar <karlj@mdstud.chalmers.se> in PR 22139, with several changes by myself. Original package from FreeBSD.
2003-07-17 21:09:23 +02:00
Update avrdude to version 5.2. Significant enhancements in this version are: o Support for JTAGICE MkII device o New devices supported: - AT90CAN128 ... o Support for STK500 Version 2 Protocol (the latter being the principal reason for the update, as the recent firmware on the STK500 development boards requires protocol version 2)
2006-12-11 17:26:39 +01:00
CONFIGURE_ARGS+= --enable-doc
PR/45924 --- update to 5.11 with minor changes (1) update 5.10 to 5.11 (2) Trying to remove pkglint -Wall warning (3) Update HOMEPAGE URL ----- ----- ----- AVRDUDE 5.11 relesed (2011/8/27 By joerg_wunsch) Finally, more than 1.5 years after the previous release, AVRDUDE 5.11 is finally done. This is mostly a bugfix release, but also includes a few enhancements. The two most important enhancements are: - TPI (i.e. ATtiny4/5/9/10) programming support for bitbang programmers. - FTDI MPSSE (FT2232 etc.) bitbang support. ----- ----- -----
2012-02-07 01:21:48 +01:00
CONFIGURE_ARGS+= --sysconfdir=${PKG_SYSCONFDIR}
Repair compilation on sunos and maybe others. Added some missing autoconf tests, fixed a non portable call to the shell builtin test, and use the pkgsrc DEFAULT_SERIAL_DEVICE variable for setting the serial device.
2007-09-28 23:11:49 +02:00
CONFIGURE_ENV+= DEFAULT_SER_PORT=${DEFAULT_SERIAL_DEVICE:Q}
PR/45924 --- update to 5.11 with minor changes (1) update 5.10 to 5.11 (2) Trying to remove pkglint -Wall warning (3) Update HOMEPAGE URL ----- ----- ----- AVRDUDE 5.11 relesed (2011/8/27 By joerg_wunsch) Finally, more than 1.5 years after the previous release, AVRDUDE 5.11 is finally done. This is mostly a bugfix release, but also includes a few enhancements. The two most important enhancements are: - TPI (i.e. ATtiny4/5/9/10) programming support for bitbang programmers. - FTDI MPSSE (FT2232 etc.) bitbang support. ----- ----- -----
2012-02-07 01:21:48 +01:00
PLIST_SUBST+= DISTNAME=${DISTNAME}
* Remove outdates texinfo.tex file from doc directory that was breaking modern etex by forcing it to output pdf instead of dvi. * List the info files directly in the PLIST.
2006-03-22 19:41:09 +01:00
Repair compilation on sunos and maybe others. Added some missing autoconf tests, fixed a non portable call to the shell builtin test, and use the pkgsrc DEFAULT_SERIAL_DEVICE variable for setting the serial device.
2007-09-28 23:11:49 +02:00
# The autotools used by this pkg are older than what's in pkgsrc
# currently. This makes the diffs huge.
pre-configure:
Update to 5.8. Upstream changelog is obviously too massive to paste it here. All hard update work done by Simon 'corecode' Schubert and minor modifications by me.
2009-08-27 17:34:48 +02:00
cd ${WRKSRC} && autoreconf -vif
# DragonFly has stripped makeinfo in the base - without texi2dvi.
.if ${OPSYS} == "DragonFly"
BUILD_DEPENDS+= gtexinfo-[0-9]*:../../devel/gtexinfo
.endif
Repair compilation on sunos and maybe others. Added some missing autoconf tests, fixed a non portable call to the shell builtin test, and use the pkgsrc DEFAULT_SERIAL_DEVICE variable for setting the serial device.
2007-09-28 23:11:49 +02:00
PR/41750 -- use libftdi.
2012-04-16 15:09:27 +02:00
.include "../../devel/libftdi/buildlink3.mk"
(Upstream) Bump version 5.11 to 6.0.1 ---------------------------------------------------------------------- Version 6.0.1: * Major changes compared to the previous version: - Programmer types in configuration file are no longer keywords but specified as string. So you need to change 'type = XYZ;' to 'type = "XYZ";' in own config files. (internal: The parser does not need to know all programmer types now, new programmers will update only the table in pgm_type.c.) - The erase cycle counter (formerly options -y / -Y) has been removed. - Specifying a -U option without a memory type (short form of option argument list) now defaults to "application" memory for Xmega devices, and "flash" for everything else. This ensures the Xmega bootloader is not accidentally touched. - For programmers that support it, the default erase method is a page erase now, rather than a chip erase (Xmega only). - Keep track of input file contents Memory segments are being tracked to remember whether they've been actually read from a file. Only segments that came from a file are being programmed into the device, or considered for verification. This drastically improves handling speed for sparse files (e.g. files that have a second bootloader segment), and it ensures the device contents is actually compared for everything mentioned in the file (even in case the file has large 0xFF blocks). - The -U option now accepts ELF files as input files, and extracts the appropriate section contents that matches the requested memory region. To enable this feature, the host system used for the compilation must have a libelf around, including the respective header files (i.e., package "libelf-devel" on many Linux systems). - Programmers and parts lists They are now sorted at output with '-c ?'/'-p ?'. (patch #7671: Sorting programmers and parts lists for console output) Programmers and parts lists in documentation generated from lists mentioned above. (patch #7687: Autogenerating programmers and parts lists for docs) Output list of programmer types with '-c ?type', add list to documentation - Configuration files now accepts parent parts/programmers, parts starting with '.' (eg. .xmega) are not included in output parts list and can be used as abstract parents (bug #34302: Feature request : device configuration with parent classes) (patch #7688: Implement parent programmers feature) - Additional config files which are read after default can be specified on command line using '-C +filename' (patch #7699 Read additional config files) - "Safemode" can now be turned off by default from within a configuration file (like ~/.avrduderc). - The new option -l logfile allows to redirect diagnostic messages to a logfile rather than stderr. Useful to record debugging traces, in particular in environments which do not offer shell-style redirection functionality for standard streams. - When leaving debugWIRE mode, immediately retry with ISP rather than bailing out completely. - The USBasp programmer implementation now supports detailed traces with -vvv, and device communication traces with -vvvv. - The "verbose" terminal mode command allows to query or modify the verbosity level. * New devices supported: - ATmega48P (patch #7629 add support for atmega48p) - AT90PWM316 (bug #21797: AT90PWM316: New part description) - ATxmega16D4, ATxmega32D4, ATxmega64D4, ATxmega128D4 - ATmega256RFR2, ATmega128RFR2, ATmega64RFR2, ATmega2564RFR2, ATmega1284RFR2, ATmega644RFR2 - ATtiny1634 - ATxmega128A1U, ATxmega128A3U, ATxmega128A4U, ATxmega128B1, ATxmega128B3, ATxmega128C3, ATxmega128D3, ATxmega16A4U, ATxmega16C4, ATxmega192A3U, ATxmega192C3, ATxmega192D3, ATxmega256A3BU, ATxmega256A3U, ATxmega256C3, ATxmega256D3, ATxmega32A4U, ATxmega32C4, ATxmega384C3, ATxmega384D3, ATxmega64A1U, ATxmega64A3U, ATxmega64A4U, ATxmega64B1, ATxmega64B3, ATxmega64C3, ATxmega64D3 - ATtiny43U - ATmega406 - ATxmega8E5, ATxmega16E5, ATxmega32E5 - ATtiny20, ATtiny40 * New programmers supported: - linuxgpio + any (embedded) Linux system with 4 GPIOs available can be used as a programmer with little or no additional hardware. - avrftdi + o-link (patch #7672 adding support for O-Link (FTDI based JTAG) as programmer) + 4232h (patch #7715 FT4232H support) - TPI support + openmoko (bug #37977 Support for Openmoko Debug Board) - usbasp + nibobee (previously specified as '-c usbasp -P nibobee) + usbasp-clone (same as usbasp but ignores vendor and product string, checks only vid/pid) - ftdi_syncbb (new type for synchronous bitbanging with ft232r/ft245r) + ft245r (FT245R Synchronous BitBang, miso = D1, sck = D0, mosi = D2, reset = D4) + ft232r (FT232R Synchronous BitBang, miso = RxD, sck = RTS, mosi = TxD, reset = DTR) + bwmega (BitWizard ftdi_atmega builtin programmer, miso = DSR, sck = DCD, mosi = CTS, reset = RI) + arduino-ft232r (Arduino: FT232R connected to ISP, miso = CTS X3(1), sck = DSR X3(2), mosi = DCD X3(3), reset = RI X3(4)) + diecimila (alias for arduino-ft232r) - pickit2 - Atmel JTAGICE3 - buspirate_bb (TPI programming using the BusPirate in bitbang mode) * Bugfixes - bug #34027: avrdude AT90S1200 Problem - bug #34518: loading intel hex files > 64k using record-type 4 - patch #7667: Minor memory handling fixes - patch #7680: Fixing timeout problem in ser_recv in ser_win32.c - patch #7693: Fix config file atmel URLs (+ URLs in avrdude.texi and avrpart.h) - bug #21663: AT90PWM efuse incorrect, bug #30438: efuse bits written as 0 on at90pwmxx parts - bug #35261: avrftdi uses wrong interface in avrftdi_paged_(write|load) - patch #7437 modifications to Bus Pirate module - patch #7686 Updating buspirate ascii mode to current firmware, use AUX as clock generator, and setting of serial receive timeout - bug #34768 Proposition: Change the name of the AVR32 devices - patch #7718: Merge global data of avrftdi in a private data structure - bug #35208: avrdude 5.11 on freebsd 8.2-STABLE does not reset Arduino Uno properly - bug #34518: loading intel hex files > 64k using record-type 4 (Extended Linear Address Record) - bug #34027: avrdude AT90S1200 Problem - bug #30451: Accessing some Xmega memory sections gives not supported error - bug #28744: Can't load bootloader to xmega128a1 - bug #29019: pagel/bs2 warning when uploading using stk500 to xmega - bug #30756: When setting SUT to 64ms on XMEGA, avrdude doesn't read device signature - bug #37265: wrong page sizes for XMega64xx in avrdude.conf - bug #37942: Latest SVN can't program in dragon_jtag mode - patch #7876 JTAGICE mkII fails to connect to attiny if debugwire is enabled AND target has a very slow clock - bug #39893: Verification failure with AVRISPmkII and Xmega - bug #38713: Compilation of the documentation breaks with texinfo-5 - bug #38023: avrdude doesn't return an error code when attempting to upload an invalid Intel HEX file - bug #39794: warnings when building avrdude 6.0rc1 under CentOS 6.4 - bug #35800: Compilation error on certain systems if parport is disabled - bug #38307: Can't write usersig of an xmega256a3 - bug #38580: Current svn head, xmega and fuses, all fuses tied to fuse0 - bug #39691: Buffer overrun when reading EEPROM byte with JTAGICE3 - bug #38951: AVR109 use byte offset instead of word offset - patch #7769: Write flash fails for AVR910 programmers - bug #38732: Support for ATtiny1634 - bug #36901: flashing Atmega32U4 EEPROM produces garbage on chip - bug #28344: chip_erase_delay too short for ATmega324P, 644, 644P, and 1284P - bug #34277: avrdude reads wrong byte order if using avr911 (aka butterfly) - bug #35456: The progress bar for STK500V2 programmer is "wrong". - patch #5708: avrdude should make 10 synchronization attempts instead of just one - patch #7606: ATtiny43u support - patch #7657: Add ATmega406 support for avrdude using DRAGON + JTAG - bug #35474: Feature request: print fuse values in safemode output. - patch #7710: usb_libusb: Check VID/PID before opening device - [no-id]: Fix SCK period adjustment for STK500v2 - bug #40040: Support for ATtiny20 and ATtiny40 - bug #40055: AVRDUDE segfaults when writing eeprom
2013-12-06 08:23:55 +01:00
.include "../../devel/libhid/buildlink3.mk"
.include "../../devel/libftdi1/buildlink3.mk"
Import global switch for libusb's implementation [2/2] This switch is meant to be used by packages requiring an implementation of the former libusb (as in devel/libusb). The original implementation can be chosen by setting LIBUSB_TYPE to "native". The alternative implementation libusb-compat (as in devel/libusb-compat) wraps libusb1 (in devel/libusb1). This implementation can be chosen by setting LIBUSB_TYPE to "compat". On NetBSD, it has the advantage of not requiring root privileges to locate and use USB devices without a kernel driver. This second part switches packages using libusb to this framework. It does not change compilation options or dependencies at this point. Compile-tested on most packages affected and available on NetBSD/amd64.
2018-02-10 14:53:46 +01:00
.include "../../mk/libusb.buildlink3.mk"
(Upstream) Bump version 5.11 to 6.0.1 ---------------------------------------------------------------------- Version 6.0.1: * Major changes compared to the previous version: - Programmer types in configuration file are no longer keywords but specified as string. So you need to change 'type = XYZ;' to 'type = "XYZ";' in own config files. (internal: The parser does not need to know all programmer types now, new programmers will update only the table in pgm_type.c.) - The erase cycle counter (formerly options -y / -Y) has been removed. - Specifying a -U option without a memory type (short form of option argument list) now defaults to "application" memory for Xmega devices, and "flash" for everything else. This ensures the Xmega bootloader is not accidentally touched. - For programmers that support it, the default erase method is a page erase now, rather than a chip erase (Xmega only). - Keep track of input file contents Memory segments are being tracked to remember whether they've been actually read from a file. Only segments that came from a file are being programmed into the device, or considered for verification. This drastically improves handling speed for sparse files (e.g. files that have a second bootloader segment), and it ensures the device contents is actually compared for everything mentioned in the file (even in case the file has large 0xFF blocks). - The -U option now accepts ELF files as input files, and extracts the appropriate section contents that matches the requested memory region. To enable this feature, the host system used for the compilation must have a libelf around, including the respective header files (i.e., package "libelf-devel" on many Linux systems). - Programmers and parts lists They are now sorted at output with '-c ?'/'-p ?'. (patch #7671: Sorting programmers and parts lists for console output) Programmers and parts lists in documentation generated from lists mentioned above. (patch #7687: Autogenerating programmers and parts lists for docs) Output list of programmer types with '-c ?type', add list to documentation - Configuration files now accepts parent parts/programmers, parts starting with '.' (eg. .xmega) are not included in output parts list and can be used as abstract parents (bug #34302: Feature request : device configuration with parent classes) (patch #7688: Implement parent programmers feature) - Additional config files which are read after default can be specified on command line using '-C +filename' (patch #7699 Read additional config files) - "Safemode" can now be turned off by default from within a configuration file (like ~/.avrduderc). - The new option -l logfile allows to redirect diagnostic messages to a logfile rather than stderr. Useful to record debugging traces, in particular in environments which do not offer shell-style redirection functionality for standard streams. - When leaving debugWIRE mode, immediately retry with ISP rather than bailing out completely. - The USBasp programmer implementation now supports detailed traces with -vvv, and device communication traces with -vvvv. - The "verbose" terminal mode command allows to query or modify the verbosity level. * New devices supported: - ATmega48P (patch #7629 add support for atmega48p) - AT90PWM316 (bug #21797: AT90PWM316: New part description) - ATxmega16D4, ATxmega32D4, ATxmega64D4, ATxmega128D4 - ATmega256RFR2, ATmega128RFR2, ATmega64RFR2, ATmega2564RFR2, ATmega1284RFR2, ATmega644RFR2 - ATtiny1634 - ATxmega128A1U, ATxmega128A3U, ATxmega128A4U, ATxmega128B1, ATxmega128B3, ATxmega128C3, ATxmega128D3, ATxmega16A4U, ATxmega16C4, ATxmega192A3U, ATxmega192C3, ATxmega192D3, ATxmega256A3BU, ATxmega256A3U, ATxmega256C3, ATxmega256D3, ATxmega32A4U, ATxmega32C4, ATxmega384C3, ATxmega384D3, ATxmega64A1U, ATxmega64A3U, ATxmega64A4U, ATxmega64B1, ATxmega64B3, ATxmega64C3, ATxmega64D3 - ATtiny43U - ATmega406 - ATxmega8E5, ATxmega16E5, ATxmega32E5 - ATtiny20, ATtiny40 * New programmers supported: - linuxgpio + any (embedded) Linux system with 4 GPIOs available can be used as a programmer with little or no additional hardware. - avrftdi + o-link (patch #7672 adding support for O-Link (FTDI based JTAG) as programmer) + 4232h (patch #7715 FT4232H support) - TPI support + openmoko (bug #37977 Support for Openmoko Debug Board) - usbasp + nibobee (previously specified as '-c usbasp -P nibobee) + usbasp-clone (same as usbasp but ignores vendor and product string, checks only vid/pid) - ftdi_syncbb (new type for synchronous bitbanging with ft232r/ft245r) + ft245r (FT245R Synchronous BitBang, miso = D1, sck = D0, mosi = D2, reset = D4) + ft232r (FT232R Synchronous BitBang, miso = RxD, sck = RTS, mosi = TxD, reset = DTR) + bwmega (BitWizard ftdi_atmega builtin programmer, miso = DSR, sck = DCD, mosi = CTS, reset = RI) + arduino-ft232r (Arduino: FT232R connected to ISP, miso = CTS X3(1), sck = DSR X3(2), mosi = DCD X3(3), reset = RI X3(4)) + diecimila (alias for arduino-ft232r) - pickit2 - Atmel JTAGICE3 - buspirate_bb (TPI programming using the BusPirate in bitbang mode) * Bugfixes - bug #34027: avrdude AT90S1200 Problem - bug #34518: loading intel hex files > 64k using record-type 4 - patch #7667: Minor memory handling fixes - patch #7680: Fixing timeout problem in ser_recv in ser_win32.c - patch #7693: Fix config file atmel URLs (+ URLs in avrdude.texi and avrpart.h) - bug #21663: AT90PWM efuse incorrect, bug #30438: efuse bits written as 0 on at90pwmxx parts - bug #35261: avrftdi uses wrong interface in avrftdi_paged_(write|load) - patch #7437 modifications to Bus Pirate module - patch #7686 Updating buspirate ascii mode to current firmware, use AUX as clock generator, and setting of serial receive timeout - bug #34768 Proposition: Change the name of the AVR32 devices - patch #7718: Merge global data of avrftdi in a private data structure - bug #35208: avrdude 5.11 on freebsd 8.2-STABLE does not reset Arduino Uno properly - bug #34518: loading intel hex files > 64k using record-type 4 (Extended Linear Address Record) - bug #34027: avrdude AT90S1200 Problem - bug #30451: Accessing some Xmega memory sections gives not supported error - bug #28744: Can't load bootloader to xmega128a1 - bug #29019: pagel/bs2 warning when uploading using stk500 to xmega - bug #30756: When setting SUT to 64ms on XMEGA, avrdude doesn't read device signature - bug #37265: wrong page sizes for XMega64xx in avrdude.conf - bug #37942: Latest SVN can't program in dragon_jtag mode - patch #7876 JTAGICE mkII fails to connect to attiny if debugwire is enabled AND target has a very slow clock - bug #39893: Verification failure with AVRISPmkII and Xmega - bug #38713: Compilation of the documentation breaks with texinfo-5 - bug #38023: avrdude doesn't return an error code when attempting to upload an invalid Intel HEX file - bug #39794: warnings when building avrdude 6.0rc1 under CentOS 6.4 - bug #35800: Compilation error on certain systems if parport is disabled - bug #38307: Can't write usersig of an xmega256a3 - bug #38580: Current svn head, xmega and fuses, all fuses tied to fuse0 - bug #39691: Buffer overrun when reading EEPROM byte with JTAGICE3 - bug #38951: AVR109 use byte offset instead of word offset - patch #7769: Write flash fails for AVR910 programmers - bug #38732: Support for ATtiny1634 - bug #36901: flashing Atmega32U4 EEPROM produces garbage on chip - bug #28344: chip_erase_delay too short for ATmega324P, 644, 644P, and 1284P - bug #34277: avrdude reads wrong byte order if using avr911 (aka butterfly) - bug #35456: The progress bar for STK500V2 programmer is "wrong". - patch #5708: avrdude should make 10 synchronization attempts instead of just one - patch #7606: ATtiny43u support - patch #7657: Add ATmega406 support for avrdude using DRAGON + JTAG - bug #35474: Feature request: print fuse values in safemode output. - patch #7710: usb_libusb: Check VID/PID before opening device - [no-id]: Fix SCK period adjustment for STK500v2 - bug #40040: Support for ATtiny20 and ATtiny40 - bug #40055: AVRDUDE segfaults when writing eeprom
2013-12-06 08:23:55 +01:00
.include "../../devel/libusb1/buildlink3.mk"
# elf_getshdrstrndx
.include "../../devel/libelf/buildlink3.mk"
Add readline prerequisite.
2004-10-18 06:15:14 +02:00
.include "../../devel/readline/buildlink3.mk"
avrdude - Program for programming the on-chip memory of Atmel AVR CPUs Submitted by Karl Janmar <karlj@mdstud.chalmers.se> in PR 22139, with several changes by myself. Original package from FreeBSD.
2003-07-17 21:09:23 +02:00
.include "../../mk/bsd.pkg.mk"
Reference in a new issue Copy permalink