Update wpa_supplicant to v2.5
Changelog: 2015-09-27 - v2.5 * fixed P2P validation of SSID element length before copying it [http://w1.fi/security/2015-1/] (CVE-2015-1863) * fixed WPS UPnP vulnerability with HTTP chunked transfer encoding [http://w1.fi/security/2015-2/] (CVE-2015-4141) * fixed WMM Action frame parser (AP mode) [http://w1.fi/security/2015-3/] (CVE-2015-4142) * fixed EAP-pwd peer missing payload length validation [http://w1.fi/security/2015-4/] (CVE-2015-4143, CVE-2015-4144, CVE-2015-4145, CVE-2015-4146) * fixed validation of WPS and P2P NFC NDEF record payload length [http://w1.fi/security/2015-5/] * nl80211: - added VHT configuration for IBSS - fixed vendor command handling to check OUI properly - allow driver-based roaming to change ESS * added AVG_BEACON_RSSI to SIGNAL_POLL output * wpa_cli: added tab completion for number of commands * removed unmaintained and not yet completed SChannel/CryptoAPI support * modified Extended Capabilities element use in Probe Request frames to include all cases if any of the values are non-zero * added support for dynamically creating/removing a virtual interface with interface_add/interface_remove * added support for hashed password (NtHash) in EAP-pwd peer * added support for memory-only PSK/passphrase (mem_only_psk=1 and CTRL-REQ/RSP-PSK_PASSPHRASE) * P2P - optimize scan frequencies list when re-joining a persistent group - fixed number of sequences with nl80211 P2P Device interface - added operating class 125 for P2P use cases (this allows 5 GHz channels 161 and 169 to be used if they are enabled in the current regulatory domain) - number of fixes to P2PS functionality - do not allow 40 MHz co-ex PRI/SEC switch to force MCC - extended support for preferred channel listing * D-Bus: - fixed WPS property of fi.w1.wpa_supplicant1.BSS interface - fixed PresenceRequest to use group interface - added new signals: FindStopped, WPS pbc-overlap, GroupFormationFailure, WPS timeout, InvitationReceived - added new methods: WPS Cancel, P2P Cancel, Reconnect, RemoveClient - added manufacturer info * added EAP-EKE peer support for deriving Session-Id * added wps_priority configuration parameter to set the default priority for all network profiles added by WPS * added support to request a scan with specific SSIDs with the SCAN command (optional "ssid <hexdump>" arguments) * removed support for WEP40/WEP104 as a group cipher with WPA/WPA2 * fixed SAE group selection in an error case * modified SAE routines to be more robust and PWE generation to be stronger against timing attacks * added support for Brainpool Elliptic Curves with SAE * added support for CCMP-256 and GCMP-256 as group ciphers with FT * fixed BSS selection based on estimated throughput * added option to disable TLSv1.0 with OpenSSL (phase1="tls_disable_tlsv1_0=1") * added Fast Session Transfer (FST) module * fixed OpenSSL PKCS#12 extra certificate handling * fixed key derivation for Suite B 192-bit AKM (this breaks compatibility with the earlier version) * added RSN IE to Mesh Peering Open/Confirm frames * number of small fixes 2015-03-15 - v2.4 * allow OpenSSL cipher configuration to be set for internal EAP server (openssl_ciphers parameter) * fixed number of small issues based on hwsim test case failures and static analyzer reports * P2P: - add new=<0/1> flag to P2P-DEVICE-FOUND events - add passive channels in invitation response from P2P Client - enable nl80211 P2P_DEVICE support by default - fix regresssion in disallow_freq preventing search on social channels - fix regressions in P2P SD query processing - try to re-invite with social operating channel if no common channels in invitation - allow cross connection on parent interface (this fixes number of use cases with nl80211) - add support for P2P services (P2PS) - add p2p_go_ctwindow configuration parameter to allow GO CTWindow to be configured * increase postponing of EAPOL-Start by one second with AP/GO that supports WPS 2.0 (this makes it less likely to trigger extra roundtrip of identity frames) * add support for PMKSA caching with SAE * add support for control mesh BSS (IEEE 802.11s) operations * fixed number of issues with D-Bus P2P commands * fixed regression in ap_scan=2 special case for WPS * fixed macsec_validate configuration * add a workaround for incorrectly behaving APs that try to use EAPOL-Key descriptor version 3 when the station supports PMF even if PMF is not enabled on the AP * allow TLS v1.1 and v1.2 to be negotiated by default; previous behavior of disabling these can be configured to work around issues with broken servers with phase1="tls_disable_tlsv1_1=1 tls_disable_tlsv1_2=1" * add support for Suite B (128-bit and 192-bit level) key management and cipher suites * add WMM-AC support (WMM_AC_ADDTS/WMM_AC_DELTS) * improved BSS Transition Management processing * add support for neighbor report * add support for link measurement * fixed expiration of BSS entry with all-zeros BSSID * add optional LAST_ID=x argument to LIST_NETWORK to allow all configured networks to be listed even with huge number of network profiles * add support for EAP Re-Authentication Protocol (ERP) * fixed EAP-IKEv2 fragmentation reassembly * improved PKCS#11 configuration for OpenSSL * set stdout to be line-buffered * add TDLS channel switch configuration * add support for MAC address randomization in scans with nl80211 * enable HT for IBSS if supported by the driver * add BSSID black and white lists (bssid_blacklist, bssid_whitelist) * add support for domain_suffix_match with GnuTLS * add OCSP stapling client support with GnuTLS * include peer certificate in EAP events even without a separate probe operation; old behavior can be restored with cert_in_cb=0 * add peer ceritficate alt subject name to EAP events (CTRL-EVENT-EAP-PEER-ALT) * add domain_match network profile parameter (similar to domain_suffix_match, but full match is required) * enable AP/GO mode HT Tx STBC automatically based on driver support * add ANQP-QUERY-DONE event to provide information on ANQP parsing status * allow passive scanning to be forced with passive_scan=1 * add a workaround for Linux packet socket behavior when interface is in bridge * increase 5 GHz band preference in BSS selection (estimate SNR, if info not available from driver; estimate maximum throughput based on common HT/VHT/specific TX rate support) * add INTERWORKING_ADD_NETWORK ctrl_iface command; this can be used to implement Interworking network selection behavior in upper layers software components * add optional reassoc_same_bss_optim=1 (disabled by default) optimization to avoid unnecessary Authentication frame exchange * extend TDLS frame padding workaround to cover all packets * allow wpa_supplicant to recover nl80211 functionality if the cfg80211 module gets removed and reloaded without restarting wpa_supplicant * allow hostapd DFS implementation to be used in wpa_supplicant AP mode 2014-10-09 - v2.3 * fixed number of minor issues identified in static analyzer warnings * fixed wfd_dev_info to be more careful and not read beyond the buffer when parsing invalid information for P2P-DEVICE-FOUND * extended P2P and GAS query operations to support drivers that have maximum remain-on-channel time below 1000 ms (500 ms is the current minimum supported value) * added p2p_search_delay parameter to make the default p2p_find delay configurable * improved P2P operating channel selection for various multi-channel concurrency cases * fixed some TDLS failure cases to clean up driver state * fixed dynamic interface addition cases with nl80211 to avoid adding ifindex values to incorrect interface to skip foreign interface events properly * added TDLS workaround for some APs that may add extra data to the end of a short frame * fixed EAP-AKA' message parser with multiple AT_KDF attributes * added configuration option (p2p_passphrase_len) to allow longer passphrases to be generated for P2P groups * fixed IBSS channel configuration in some corner cases * improved HT/VHT/QoS parameter setup for TDLS * modified D-Bus interface for P2P peers/groups * started to use constant time comparison for various password and hash values to reduce possibility of any externally measurable timing differences * extended explicit clearing of freed memory and expired keys to avoid keeping private data in memory longer than necessary * added optional scan_id parameter to the SCAN command to allow manual scan requests for active scans for specific configured SSIDs * fixed CTRL-EVENT-REGDOM-CHANGE event init parameter value * added option to set Hotspot 2.0 Rel 2 update_identifier in network configuration to support external configuration * modified Android PNO functionality to send Probe Request frames only for hidden SSIDs (based on scan_ssid=1) * added generic mechanism for adding vendor elements into frames at runtime (VENDOR_ELEM_ADD, VENDOR_ELEM_GET, VENDOR_ELEM_REMOVE) * added fields to show unrecognized vendor elements in P2P_PEER * removed EAP-TTLS/MSCHAPv2 interoperability workaround so that MS-CHAP2-Success is required to be present regardless of eap_workaround configuration * modified EAP fast session resumption to allow results to be used only with the same network block that generated them * extended freq_list configuration to apply for sched_scan as well as normal scan * modified WPS to merge mixed-WPA/WPA2 credentials from a single session * fixed nl80211/RTM_DELLINK processing when a P2P GO interface is removed from a bridge * fixed number of small P2P issues to make negotiations more robust in corner cases * added experimental support for using temporary, random local MAC address (mac_addr and preassoc_mac_addr parameters); this is disabled by default (i.e., previous behavior of using permanent address is maintained if configuration is not changed) * added D-Bus interface for setting/clearing WFD IEs * fixed TDLS AID configuration for VHT * modified -m<conf> configuration file to be used only for the P2P non-netdev management device and do not load this for the default station interface or load the station interface configuration for the P2P management interface * fixed external MAC address changes while wpa_supplicant is running * started to enable HT (if supported by the driver) for IBSS * fixed wpa_cli action script execution to use more robust mechanism (CVE-2014-3686) 2014-06-04 - v2.2 * added DFS indicator to get_capability freq * added/fixed nl80211 functionality - BSSID/frequency hint for driver-based BSS selection - fix tearing down WDS STA interfaces - support vendor specific driver command (VENDOR <vendor id> <sub command id> [<hex formatted data>]) - GO interface teardown optimization - allow beacon interval to be configured for IBSS - add SHA256-based AKM suites to CONNECT/ASSOCIATE commands * removed unused NFC_RX_HANDOVER_REQ and NFC_RX_HANDOVER_SEL control interface commands (the more generic NFC_REPORT_HANDOVER is now used) * fixed MSCHAP UTF-8 to UCS-2 conversion for three-byte encoding; this fixes password with include UTF-8 characters that use three-byte encoding EAP methods that use NtPasswordHash * fixed couple of sequencies where radio work items could get stuck, e.g., when rfkill blocking happens during scanning or when scan-for-auth workaround is used * P2P enhancements/fixes - enable enable U-APSD on GO automatically if the driver indicates support for this - fixed some service discovery cases with broadcast queries not being sent to all stations - fixed Probe Request frame triggering invitation to trigger only a single invitation instance even if multiple Probe Request frames are received - fixed a potential NULL pointer dereference crash when processing an invalid Invitation Request frame - add optional configuration file for the P2P_DEVICE parameters - optimize scan for GO during persistent group invocation - fix possible segmentation fault when PBC overlap is detected while using a separate P2P group interface - improve GO Negotiation robustness by allowing GO Negotiation Confirmation to be retransmitted - do use freed memory on device found event when P2P NFC * added phase1 network parameter options for disabling TLS v1.1 and v1.2 to allow workarounds with misbehaving AAA servers (tls_disable_tlsv1_1=1 and tls_disable_tlsv1_2=1) * added support for OCSP stapling to validate AAA server certificate during TLS exchange * Interworking/Hotspot 2.0 enhancements - prefer the last added network in Interworking connection to make the behavior more consistent with likely user expectation - roaming partner configuration (roaming_partner within a cred block) - support Hotspot 2.0 Release 2 * "hs20_anqp_get <BSSID> 8" to request OSU Providers list * "hs20_icon_request <BSSID> <icon filename>" to request icon files * "fetch_osu" and "cancel_osu_fetch" to start/stop full OSU provider search (all suitable APs in scan results) * OSEN network for online signup connection * min_{dl,ul}_bandwidth_{home,roaming} cred parameters * max_bss_load cred parameter * req_conn_capab cred parameter * sp_priority cred parameter * ocsp cred parameter * slow down automatic connection attempts on EAP failure to meet required behavior (no more than 10 retries within a 10-minute interval) * sample implementation of online signup client (both SPP and OMA-DM protocols) (hs20/client/*) - fixed GAS indication for additional comeback delay with status code 95 - extend ANQP_GET to accept Hotspot 2.0 subtypes ANQP_GET <addr> <info id>[,<info id>]... [,hs20:<subtype>][...,hs20:<subtype>] - add control interface events CRED-ADDED <id>, CRED-MODIFIED <id> <field>, CRED-REMOVED <id> - add "GET_CRED <id> <field>" command - enable FT for the connection automatically if the AP advertises support for this - fix a case where auto_interworking=1 could end up stopping scanning * fixed TDLS interoperability issues with supported operating class in some deployed stations * internal TLS implementation enhancements/fixes - add SHA256-based cipher suites - add DHE-RSA cipher suites - fix X.509 validation of PKCS#1 signature to check for extra data * fixed PTK derivation for CCMP-256 and GCMP-256 * added "reattach" command for fast reassociate-back-to-same-BSS * allow PMF to be enabled for AP mode operation with the ieee80211w parameter * added "get_capability tdls" command * added option to set config blobs through control interface with "SET blob <name> <hexdump>" * D-Bus interface extensions/fixes - make p2p_no_group_iface configurable - declare ServiceDiscoveryRequest method properly - export peer's device address as a property - make reassociate command behave like the control interface one, i.e., to allow connection from disconnected state * added optional "freq=<channel ranges>" parameter to SET pno * added optional "freq=<channel ranges>" parameter to SELECT_NETWORK * fixed OBSS scan result processing for 20/40 MHz co-ex report * remove WPS 1.0 only support, i.e., WSC 2.0 support is now enabled whenever CONFIG_WPS=y is set * fixed regression in parsing of WNM Sleep Mode exit key data * fixed potential segmentation fault and memory leaks in WNM neighbor report processing * EAP-pwd fixes - fragmentation of PWD-Confirm-Resp - fix memory leak when fragmentation is used - fix possible segmentation fault on EAP method deinit if an invalid group is negotiated * added MACsec/IEEE Std 802.1X-2010 PAE implementation (currently available only with the macsec_qca driver wrapper) * fixed EAP-SIM counter-too-small message * added 'dup_network <id_s> <id_d> <name>' command; this can be used to clone the psk field without having toextract it from wpa_supplicant * fixed GSM authentication on USIM * added support for usin epoll in eloop (CONFIG_ELOOP_EPOLL=y) * fixed some concurrent virtual interface cases with dedicated P2P management interface to not catch events from removed interface (this could result in the management interface getting disabled) * fixed a memory leak in SAE random number generation * fixed off-by-one bounds checking in printf_encode() - this could result in some control interface ATTACH command cases terminating wpa_supplicant * fixed EAPOL-Key exchange when GCMP is used with SHA256-based AKM * various bug fixes 2014-02-04 - v2.1 * added support for simultaneous authentication of equals (SAE) for stronger password-based authentication with WPA2-Personal * improved P2P negotiation and group formation robustness - avoid unnecessary Dialog Token value changes during retries - avoid more concurrent scanning cases during full group formation sequence - do not use potentially obsolete scan result data from driver cache for peer discovery/updates - avoid undesired re-starting of GO negotiation based on Probe Request frames - increase GO Negotiation and Invitation timeouts to address busy environments and peers that take long time to react to messages, e.g., due to power saving - P2P Device interface type * improved P2P channel selection (use more peer information and allow more local options) * added support for optional per-device PSK assignment by P2P GO (wpa_cli p2p_set per_sta_psk <0/1>) * added P2P_REMOVE_CLIENT for removing a client from P2P groups (including persistent groups); this can be used to securely remove a client from a group if per-device PSKs are used * added more configuration flexibility for allowed P2P GO/client channels (p2p_no_go_freq list and p2p_add_cli_chan=0/1) * added nl80211 functionality - VHT configuration for nl80211 - MFP (IEEE 802.11w) information for nl80211 command API - support split wiphy dump - FT (IEEE 802.11r) with driver-based SME - use advertised number of supported concurrent channels - QoS Mapping configuration * improved TDLS negotiation robustness * added more TDLS peer parameters to be configured to the driver * optimized connection time by allowing recently received scan results to be used instead of having to run through a new scan * fixed ctrl_iface BSS command iteration with RANGE argument and no exact matches; also fixed argument parsing for some cases with multiple arguments * added 'SCAN TYPE=ONLY' ctrl_iface command to request manual scan without executing roaming/network re-selection on scan results * added Session-Id derivation for EAP peer methods * added fully automated regression testing with mac80211_hwsim * changed configuration parser to reject invalid integer values * allow AP/Enrollee to be specified with BSSID instead of UUID for WPS ER operations * disable network block temporarily on repeated connection failures * changed the default driver interface from wext to nl80211 if both are included in the build * remove duplicate networks if WPS provisioning is run multiple times * remove duplicate networks when Interworking network selection uses the same network * added global freq_list configuration to allow scan frequencies to be limited for all cases instead of just for a specific network block * added support for BSS Transition Management * added option to use "IFNAME=<ifname> " prefix to use the global control interface connection to perform per-interface commands; similarly, allow global control interface to be used as a monitor interface to receive events from all interfaces * fixed OKC-based PMKSA cache entry clearing * fixed TKIP group key configuration with FT * added support for using OCSP stapling to validate server certificate (ocsp=1 as optional and ocsp=2 as mandatory) * added EAP-EKE peer * added peer restart detection for IBSS RSN * added domain_suffix_match (and domain_suffix_match2 for Phase 2 EAP-TLS) to specify additional constraint for the server certificate domain name * added support for external SIM/USIM processing in EAP-SIM, EAP-AKA, and EAP-AKA' (CTRL-REQ-SIM and CTRL-RSP-SIM commands over control interface) * added global bgscan configuration option as a default for all network blocks that do not specify their own bgscan parameters * added D-Bus methods for TDLS * added more control to scan requests - "SCAN freq=<freq list>" can be used to specify which channels are scanned (comma-separated frequency ranges in MHz) - "SCAN passive=1" can be used to request a passive scan (no Probe Request frames are sent) - "SCAN use_id" can be used to request a scan id to be returned and included in event messages related to this specific scan operation - "SCAN only_new=1" can be used to request the driver/cfg80211 to report only BSS entries that have been updated during this scan round - these optional arguments to the SCAN command can be combined with each other * modified behavior on externally triggered scans - avoid concurrent operations requiring full control of the radio when an externally triggered scan is detected - do not use results for internal roaming decision * added a new cred block parameter 'temporary' to allow credential blocks to be stored separately even if wpa_supplicant configuration file is used to maintain other network information * added "radio work" framework to schedule exclusive radio operations for off-channel functionality - reduce issues with concurrent operations that try to control which channel is used - allow external programs to request exclusive radio control in a way that avoids conflicts with wpa_supplicant * added support for using Protected Dual of Public Action frames for GAS/ANQP exchanges when associated with PMF * added support for WPS+NFC updates and P2P+NFC - improved protocol for WPS - P2P group formation/join based on NFC connection handover - new IPv4 address assignment for P2P groups (ip_addr_* configuration parameters on the GO) to replace DHCP - option to fetch and report alternative carrier records for external NFC operations * various bug fixes
This commit is contained in:
maya
parent
5f3fa0a962
commit
f529f2a403
3 changed files with 28 additions and 8 deletions
|
|
@ -1,14 +1,14 @@
|
|||
# $NetBSD: Makefile,v 1.15 2016/03/05 11:29:14 jperkin Exp $
|
||||
# $NetBSD: Makefile,v 1.16 2016/08/17 04:57:47 maya Exp $
|
||||
#
|
||||
|
||||
DISTNAME= wpa_supplicant-2.0
|
||||
PKGREVISION= 2
|
||||
DISTNAME= wpa_supplicant-2.5
|
||||
CATEGORIES= net
|
||||
MASTER_SITES= http://hostap.epitest.fi/releases/
|
||||
|
||||
MAINTAINER= reed@reedmedia.net
|
||||
HOMEPAGE= http://hostap.epitest.fi/wpa_supplicant/
|
||||
COMMENT= Wireless connection client daemon for WPA, WPA2, and WEP
|
||||
LICENSE= modified-bsd
|
||||
|
||||
USE_LANGUAGES= c
|
||||
USE_TOOLS+= gmake
|
||||
|
|
|
|||
|
|
@ -1,7 +1,8 @@
|
|||
$NetBSD: distinfo,v 1.7 2015/11/04 00:35:45 agc Exp $
|
||||
$NetBSD: distinfo,v 1.8 2016/08/17 04:57:47 maya Exp $
|
||||
|
||||
SHA1 (wpa_supplicant-2.0.tar.gz) = 78a456ff3c4af4b9bae2e0908a40f48755ffc59c
|
||||
RMD160 (wpa_supplicant-2.0.tar.gz) = f9e4729de5c6bee0142986b114fdc3fffb7a28f2
|
||||
SHA512 (wpa_supplicant-2.0.tar.gz) = c3a599e1dfa5e0bb4b8d35ed49501696ce68c807ff458c1e3bff9ed5619c780f7117c6d8d7cb9a11351e9fad27cf83fc114f255c92552e7ba084de70c5f8e254
|
||||
Size (wpa_supplicant-2.0.tar.gz) = 2044281 bytes
|
||||
SHA1 (wpa_supplicant-2.5.tar.gz) = f82281c719d2536ec4783d9442c42ff956aa39ed
|
||||
RMD160 (wpa_supplicant-2.5.tar.gz) = 07bf2b9646b0d7dec3e3507e9ef04e71784c359f
|
||||
SHA512 (wpa_supplicant-2.5.tar.gz) = e3ca36ed10b4dae8f663e98ad230c8c059c952316c21a6b0638ecb1b40a5ef1b9083138ab45207cb764a17e870b4bd0625dd6efdb65856cb4dca13ccc0559e81
|
||||
Size (wpa_supplicant-2.5.tar.gz) = 2607336 bytes
|
||||
SHA1 (patch-aa) = 998ba9cc4ef9ebd0b629a6368957da0f1159dda0
|
||||
SHA1 (patch-src_utils_common.h) = 3bf10d911822e4de657e12ee88e31d215a868fa0
|
||||
|
|
|
|||
19
net/wpa_supplicant/patches/patch-src_utils_common.h
Normal file
19
net/wpa_supplicant/patches/patch-src_utils_common.h
Normal file
|
|
@ -0,0 +1,19 @@
|
|||
$NetBSD: patch-src_utils_common.h,v 1.1 2016/08/17 04:57:47 maya Exp $
|
||||
|
||||
--- src/utils/common.h.orig 2015-09-27 19:02:05.000000000 +0000
|
||||
+++ src/utils/common.h
|
||||
@@ -11,6 +11,14 @@
|
||||
|
||||
#include "os.h"
|
||||
|
||||
+/*
|
||||
+ * NetBSD net/if.h defines if_type as a macro,
|
||||
+ * which conflicts with the use of it in the code.
|
||||
+ */
|
||||
+#if defined(__NetBSD__)
|
||||
+#undef if_type
|
||||
+#endif
|
||||
+
|
||||
#if defined(__linux__) || defined(__GLIBC__)
|
||||
#include <endian.h>
|
||||
#include <byteswap.h>
|
||||
Loading…
Reference in a new issue